Professional Documents
Culture Documents
Flash Bios DFI
Flash Bios DFI
Download the appropriate BIOS update from the Download section according to
the motherboard model and PCB (Printed Circuit Board) version.
2. Extract the BIOS binary file and the flash utility program from the zipped file using
applications such as WinZip.
3. There should be THREE files being extracted from the zipped file. They are:
*.EXE , *.BIN and *.TXT file.
4. Copy the *.BIN and *.EXE file on to a floppy disk and reboot your system from
the floppy drive.
5. Type in the following command under DOS prompt (NOT under windows!):
OR
A:\>[executable] /?
7. To check whether your BIOS has been updated successfully please refer to the
BIOS date code shown on the bottom left hand corner of the boot up screen.
WARNING: Please be very cautious during the BIOS flash process, your system
may fail to boot if the BIOS was not programmed correctly.