Professional Documents
Culture Documents
Assignment 2013
Assignment 2013
List of Assignments
1 2 3 4 5 6 7 8 Lines, Lettering, Dimensioning, Engineering Scales Geometrical Construction and Curves Projections of Points, Lines and Surfaces Projection of Solids Sectional View of Solids Development of Surfaces Isometric Projection and Isometric View Computer Aided Drafting (AutoCAD)
Signature of Faculty
Signature of HOD
Machine Drawing I
Code: ME-391
Contacts: 3P Contact week / semester: 12 ASSIGNMENTS LIST Credits: 2
1. Welds & Welded Joints 2. Symbols for Electrical & Electronic Components & Pipe Joints and Fittings 3. Conversion from isometric to orthographic projection 4. Sectional views 5. Screw Threads, Nut-Bolts & Rivet 6. Limts, Tolerances & Fits 7. Assembly Drawing and Part Drawing 7.1. Screw Jack 7.2. Pipe Vice
Signature of Faculty
Signature of HOD
ASSIGNMENTS LIST
1. Taking measurements using following instruments: (i) Vernier height & depth gauge, (ii) Dial micrometer, (iii) Thread gauge, (iv) Radius gauge, (v) Feeler gauge, (vi) Slip gauge 2. Measurement of angle of a component using: (i) Vernier bevel protractor, (ii) angle gauges, (iii) Sine-bar and slip gauges. 3. Checking / measuring parallelism, cylindricity and concentricity of components using dial indicator 4. Measurement of a specific dimension for a lot of components, and prepare a histogram from the data obtained. 5. Measurement of surface finish of products manufactured by different manufacturing processes by a Talysurf instrument 6. Measurement of temperature of warm water by Thermocouple and establishing its affectivity by comparing its reading with a thermometer 7. Measurement of air flow (CMM) across an air duct using anemometer 8. Measurement of micro feature of a product (eg. Thread of a bolt) in a profile projector
Signature of Faculty
Signature of HOD