Professional Documents
Culture Documents
Yu He Zu Xi
i. ii.
iii. iv.
v.
liquid metal will be poured into mould liquid metal is allowed to cool and harden casting is broken out or rejected of the mould
RUBBER
COMPLEX
METAL
Molten pewter ( heated to around 250 oC) - ladled and poured into the mould
Pewter - cooled and formed a shell of solid surrounding the cavity of the mould Excess molten pewter - poured back into the ladle Molten metal on the ladle - poured back into the heater Mould can be opened - the solid handle bar be taken out using a clamp Handle is dunk into the pool of molten pewter in the heating - excess solidified pewter formed can be re-melted
Tankard
Money Tree
SMOOTHEN
- ENHANCE
CONTAMINATION
OXIDE SHINY
CYLINDER
ROTATED HIGH SPEED
SCOURING PAD
PRESSED
ABRASIVE
SHINY
Money Tree Left before shot blasting, right after shot blasting.
1. 2. 3.
1.
2.
1. 2. 3.
4.
Type of products:
- Mainly pewter products - Has its own unique design - High quality accessories - childrens gift - Coffee and tea - Desktop - Drinkware - Home dcor - Ornamental - Table ware - Wine and bar accessories -
Example of products