Professional Documents
Culture Documents
4 GHz RF module
Page 1 of 2
The software is designed only to work with Microsoft Windows XP Service Pack 2. It may or may not work with any other versions of Windows like Microsoft Windows Vista. Robosoft Systems does not take any liability if the software does not work on any platform other than Microsoft Windows XP Service Pack 2 or any harm or injuries, either physical or electronic damages arising due to the use of the software. For any feedback, please mail on roboballs@robosoftsystems.co.in Please visit our website http://www.robosoftsystems.co.in for further updates fo the software.
2.4 Ghz carrier frequency. 255 possible channels. RS232 UART interface with variable baud rate. Standard configuration baud rate 9600 bps. Power LED indicator. Input Supply 5V to 12V. 2 run mode : Packet Mode and Single Byte Transfer. Variable packet length (0 to 40). Programmable channels (0 to 255). Programmable device address : 255 per channel. Compact size, plug and play. On board EEPROM for saving settings. Supported Baud Rate 300, 600, 1200, 2400, 4800, 9600 bps.
MIN 5V 30mA
Pin configurations
file://C:\Users\Admin\AppData\Local\Temp\~hhE040.htm
02/11/2010
Page 2 of 2
PACKET MODE Closed : Variable packet length (with device address selection) Open :Single byte transfer (Broadcast)
char char
Back to top
file://C:\Users\Admin\AppData\Local\Temp\~hhE040.htm
02/11/2010