Professional Documents
Culture Documents
Training BERT SDH Analyzer ANT5 Instrument
Training BERT SDH Analyzer ANT5 Instrument
ATM No restriction !
SONET
Any unit is configurable with all the above technologies Weight: < 2.5 kg Dimensions: 197 mm x 76 mm x 275 mm
3
2005 JDS Uniphase Corporation. All rights reserved.
What Is An ANT-5:-
It is: A very compact field test solution An easy to use SDH/SONET/ATM handheld tester
It has: PDH, SDH, SONET from 1.5M to 2.5G in one instrument All Interfaces built-in which means NO adapters Optimized test philosophy to reduce user costs Superb off-line viewer for easy report generation An ATM Option that supports ATM on all rates Upgrade paths from electrical only to STM-1/-4/-16 optical
ANT-5 ANT-5 can can test test all all interfaces interfaces in in the the network:network:Installation, Installation,Commissioning CommissioningMaintenance, Maintenance,Fault FaultFinding Finding
5
2005 JDS Uniphase Corporation. All rights reserved.
ANT-5
Big OK results summary speeds up installation tasks Split screen: results & set-up simultaneously Permanent LED's, animated Icons, beeper with alarms All errors counted simultaneously
STM-1/4/16o
SDH Commissioning
Verify Quality of service
$ Performance Analysis to international standards
Performance verification against: G.821, G.826, G.828, G.829, ANSI, M.2100, M.2101
2005 JDS Uniphase Corporation. All rights reserved.
10
SDH Maintenance
In service verification
Monitoring alarms/errors, OH bytes, Pointer, TCM
ANT-5 provides NRZ ECL port for monitoring of STM-1/-4/-16 signals (electr. conversion done by specific NE.
11
2005 JDS Uniphase Corporation. All rights reserved.
RNC NB
MUX
MUX
ATM
Test: - ATM BERT (HCOR, HUNC, CLR, CMR,CER) - Delay (CTD, CDV) - ATM throughput, - right VPI/VCI configuration
Company & Confidential
12
FY06 Activities
13
ANT-5
1. 2. 3. 4. 5. 6. 7. 8. 9.
Setup instrument: select structure, mapping, timer Select application (APS, RTD.) Select Actions (Alarm / Error/ Pointer generation) Select Result View (OK screen, Alarm/Error list, Histogram) START Test / STOP Test Analyze Result (OK / alarms / errors) Store results / configuration Transfer results / configurations Report Generation (off-line)
14
# # # #
15
Copy Rx -> TX
1)
16
SETUP
17
18
19
# # # # # #
20
Perf. tests on SDH substructure / PDH interfaces User defined test duration Test results exportable to PC using CSV & ASCII
21
2005 JDS Uniphase Corporation. All rights reserved.
SETUP
For the testing of Radio Links Results used for Carrier to Noise ratios
22
23
24
# # # #
25
1)
26
ACTION OH manipulation
28
ANT-5
START
/
STOP
29
Result Analysis (OK) Defect Panel Event Log Annomaly Count Graph OH Analysis Pointer Analysis Performance Analysis APS result TCM Analysis
30
31
32
33
34
Store results
Store / Autostore results and configurations on hard disc either csv-format (for implementation with spreadsheets) or ANT-5 specific format: .a5R or .a5c
35
Transfer results
Most convenient: Using the CF card ! Direct readable with any Labtop with PCMCIA slot ! Easy readable with Desktops using card readers ! Results
Configurations
36
2005 JDS Uniphase Corporation. All rights reserved.
Report generation
37
38
39
via ANT-5 Ethernet port: Install Remote Operation Client on PC / Laptop Establish connection Easy operation (GUI simuation) No additional user training required ROC is Master; Remote unit will act as a Slave (measurements run as long as connection is established)
40
41
42
43
OPTION ATM
44
ATM carried over PDH / SDH / SONET over all interface rates ATM cell generation ( 2 PVCs, UNI and NNI mode) ATM load: CBR, VBR ( bandwith, burst length, burst gap) ATM cells: O.191 test cells, ATM BERT (AAL-0), background Alarm & Error insertion (HEC, VP-AIS, VP-RDI, VC-AIS, VC-RDI) ATM QoS measurements (CER, CLR, CTD, CDV) ATM Statistics (Utilization, cell counts, HEC error ratio) ATM Channel Explorer (detects automatically active VCI, VPI)
Company & Confidential
OPTION ATM
ATM carried over PDH (E1, E3, DS-1,DS3, E4) ATM carried over SDH
STM-n VC-11/TU-11, STM-n VC-11/TU-12, STM-n VC-12 STM-n VC-3, STM-n VC-4 STM-4/16 VC4-4c
46