Professional Documents
Culture Documents
EXPERIMENT: 1
___________________________________________________________________ INTRODUCTION TO PROTEUS ISIS
BASIC THEORY:
In this Laboratory class we will be using circuit design and simulation software Proteus ISIS Following diagram explains the layout of Proteus ISIS.
Example 2: Make the following circuit and measure the current through the resistor R3.
Time Period: _________ seconds High time: ________ seconds Peak Voltage: ________ volts Lab Assignment: Use a NPN transistor to operate a 12V DC motor. Use a push button on the base of the transistor. Pressing the push button should turn on the transistor and motor should be excited.
*Use your own values of R1, R2, R3, and R4. Result: Total Resistance of circuit: _55K_ ohms Current through resistor R3: _0.09 mA . Example 3: Use the oscilloscope and frequency generator module and measure the time period and peak volts of the square wave.
Results: