Professional Documents
Culture Documents
宝马E-SYS单编模块教程: 5系 GT与 5系一样选 F010注意此处 7系选 F01 1系、新 3选 F020
宝马E-SYS单编模块教程: 5系 GT与 5系一样选 F010注意此处 7系选 F01 1系、新 3选 F020
1: OBD OBD
D X3 1 ENET XP TCPIp
(
)
VIN Target=F010 5 GT 5 F010 7 F01
First, adjust the language to U.S. English, senior there should tune. WIN7
still have to adjust.
1: Electric computer, first line into the OBD port pilots left knee, bottom
left (required fingernail to pull open the cover with OBD logo) when the
note D-head in the direction, X3 1 are located on left foot . ENET line
crystal head into the computer, XP TCPIp local connection will
automatically get address; does not turn on the car power brakes, no need
to open the engine, connect the data cable after (this time must be patient
to wait one to two minutes automatically find a local network addresses,
and so there is no success on the connection), point software Connection
logo
Select the bottom even VIN, Target in the election = F010, point connection;
5 Series and 5 Series GT F010 attention here as election election F01 1
series 7 series, the new three election F020 X3 election F025, point
connection; Do not choose DIRECT behind that direct connectivity options,
according to the E-SYS manual shows otherwise useless
ActivateFA FA SVT
Actual READ VCM
3: Press the sequence point left Expert mode, Coding, middle Read, Right
in the expanded file FA, select
ActivateFA activate FA last SVT Actual column select READ VCM
4 ECUS ACSMCASCIDCMB_MEDIA
HU_CIC [63], CAFD_0000000 READ Coding;
4: to the left ECUS following folders such as ACSM, CAS, CID, CMB_MEDIA
tap the minus sign in front, put up all these modules, you can find HU_CIC
[63], select CAFD_0000000 this one, point READ Coding;
5: The progress bar has completed, the emergence REPORT-0 ERRORS Do not be afraid, this is the show
that true OK, point CLOSE
CAFD_000000
MAX
7 Ausgelesen weriter FF
8 CAFD_000000F9
9 CODE FDL
beendet CLOSE
DVD
DVD HU_CIC
SPEEDLOCK_X_KMH_MIN 00 FF 08 HU_CIC
SPEEDLOCK_X_KMH_MAX 0A FF
CLOSE
()
HU_CIC ACOUSTICAL_LOCK_CONFIRM nicht_aktiv aktiv 1 ECUS
9 CODE FDL
beendet CLOSE
!!!
DVD
WIN7
1: OBD OBD
D X3 1 ENET XP
TCPIp
(
)
VIN
Target =F010 5 GT 5 F010
7
1 3
F01
F020
X3
F025
DIRECT E-SYS
OK
4 ECUS ACSMCASCIDCMB_MEDIA
2690 OK
7 Ausgelesen weriter FF
8 CAFD_000000F9
9 CODE FDL
beendet CLOSE
DVD
DVD
HU_CIC SPEEDLOCK_X_KMH_MIN 00 FF 08
HU_CIC SPEEDLOCK_X_KMH_MAX 0A FF
CLOSE
()
HU_CIC ACOUSTICAL_LOCK_CONFIRM nicht_aktiv aktiv
8 CAFD_000000F9
9 CODE FDL
beendet CLOSE
!!!