Professional Documents
Culture Documents
Chapter 7
Chapter 7
Design Feature
1. Extrude
Curve, Edge, Face, Sketch
Line
Solid, Sheet
+ Section :.
Curve -
CADians system
, . Copy right@2008 CADians All right reserved
105
+ Direction
Specify Vector : .
Reverse Direction : .
+ Limits : .
- Value : .
CADians system
, . Copy right@2008 CADians All right reserved
106
- Until Extended
trim .
- Through All
.
CADians system
, . Copy right@2008 CADians All right reserved
107
+ Boolean body .
: Solid Body
: Body Body Body
: Target Body Body
: Target Body Body Body
+ Draft .
None : .
From Start Limit : .
From Section : .
CADians system
, . Copy right@2008 CADians All right reserved
108
: ,
CADians system
, . Copy right@2008 CADians All right reserved
109
+ Offset
None : offset .
Single-Sided : offset.
Two-Sided: offset.
Symmetric: offset.
CADians system
, . Copy right@2008 CADians All right reserved
110
[ ]
CADians system
, . Copy right@2008 CADians All right reserved
111
[ ]
Stop at intersection -
CADians system
, . Copy right@2008 CADians All right reserved
112
2. Revolve
Section
CADians system
, . Copy right@2008 CADians All right reserved
113
+ Type :
Origin, Edge Lengths :
CADians system
, . Copy right@2008 CADians All right reserved
114
[3-2] Cylinder
,
+ Type :
- Axis,Diameter,and Height :
CADians system
, . Copy right@2008 CADians All right reserved
115
[3-3] Cone
,
+ Type :
- Diameter, Height : , ,
[3-4] Sphere
,
+ Type :
- Diameter, Center :
- Select Arc :
CADians system
, . Copy right@2008 CADians All right reserved
116
General hole
Hole .
-
.
-
Threaded Hole
thread hole .
, Data NX .
+ Position :
point , hole .
.
+ Direction :
- Normal To Face : point hole .
- Along Vector : vector hole .
CADians system
, . Copy right@2008 CADians All right reserved
117
Simple hole
: ,
Counterbore
: , , , C- C-
Countersink
: , , , C- C-
CADians system
, . Copy right@2008 CADians All right reserved
118
1) Hole ( )
2) Hole type
CADians system
, . Copy right@2008 CADians All right reserved
119
[4-2] Boss
+ Selection Steps :
Placement Face :
Boss Face
[4-3] Pocket
+ Type :
Cylindrical :
Rectangular :
,
CADians system
, . Copy right@2008 CADians All right reserved
120
General :
[4-4] Pad
+ Type
Rectangular :
,
General :
[4-5] Slot
+ Type :
Rectangular :
CADians system
, . Copy right@2008 CADians All right reserved
121
Ball-End :
U-Slot : "U" ( )
T-Slot : T
CADians system
, . Copy right@2008 CADians All right reserved
122
Dove-Tail : "-" ( )
[4-6] Groove
+ Type :
Rectangular :
Ball End :
U Groove :
[4-7] Emboss
feature
CADians system
, . Copy right@2008 CADians All right reserved
123
+ Selection :
- Select
Curve : Emboss
.(
.)
+ Face to Emboss :
- Select Face : Emboss
.
+ Face to Emboss :
Emboss .
+ End Cap : End Cap
- Embossed face : emboss
. offset Translate
.
- Plane of Section : End Cap.
- Datum Plane : datum End Cap
.
- Selected Faces : End Cap
.
1) Curve .
4) .
2) Emboss Face .
3) Emboss Face .
CADians system
, . Copy right@2008 CADians All right reserved
124
feature
.
Emboss .
2) Path Curve
1) Emboss
3) Offset
CADians system
, . Copy right@2008 CADians All right reserved
125
Counterbore : , , , C- C-
Countersink : , , , C- C-
CADians system
, . Copy right@2008 CADians All right reserved
126
+ Selection Steps :
Placement Face :
Hole Face
5. Dart / Thread
[5-1] Dart
Dart
First Set :
Second Set :
Location Curve :
Location Plane :
Orientation Plane :
CADians system
, . Copy right@2008 CADians All right reserved
127
Second set
First set
[5-2] Thread
+ Thread Type
- Symbolic :
- Detailed :
CADians system
, . Copy right@2008 CADians All right reserved
128