N\
SUPPLEMENT
To :
ANALYSIS & BESIGN
OF
FLIGHT VEHICLE
STRUCTURES
Bruhn
FOR
INCREASED SCOPE
AND USEFULNESS
William F. McCombs >PUBLISHED BY
DATATEC
DALLAS, TEXAS
Current price $15.95 plus $2,00 postage/handling.
For insured mailing add $2,00, Pay by postal money
order or cash only, please, to avoid delay of weeks,
Make Payments To
William P, McCombs
P.O, Box 763576
Dallas, TX 75376-3576
Tel. 214 337-5506
Other planned books includes
Engineering Colum Analysis (Columns, Beam-Columns,
Truss Members, Arches and Ben‘
An Introduction To Stress Analysis Of Light Structures
Te
wisi PaconseA SUPPLEMENT TO ANALYSIS AND DESIGN OF FLIGHT VEHICLE STRUCTURES
Willian PF, McCombs
‘TABLE OF CONTENTS
Article and Main Topic Page
Beam-Columns
Beam-Column Pormulas
Beam-Column Deflections
Bean-Column Formulas
Margins of Safety
‘Truss Analyais
Tangent Modulus
Multispan Bean-Colunns
Approximate Buckling Formula
Plastic Torsion
Beam Deflections
Numerical Analysis
Moment Distribution
Column Analyt
Column Analysis
Torsional Buckling
Colunn/Bean-Column Date
Material Properties
XD Crushing Loads
Margins of Safety
Dealing With Tolerances
Combined Stres:
Column Curve ¢
Free-Ended Columns
Shear Effect on Buckling
Multispan Columns
Stepped Columns
Nunerical Column Analysis
Initially Bent Columns
Column Design Data
Column Elastic Supports
Need for Successive Trials
Column Elastic End Restraint
Tangent and Effective Moduli
Buckling Load Data
End Friction Effects
References for Chapter C2
Flastic Bending Data
Plastic Bending Example
Plastic Bending Procedure
Complex Plastic Bending
Shear Stres:
ruction
nding Modulus
Apparent Margins of Safety
Flat Plate Shear Buckling
Bending Buckling
Unequal Angle Leg Thickn
Crippling Method Three
Torsional Buckling
Article and Main Topic
C9,13a Frame Stiffness criteria
C10,15b Thick-Wed Beam Analysis
611.29a Tension Field Beam Hole:
C11, 2he Rivet Design
C11,31a Stringer Construction
C11,32a Diagonal Tension - Stringe:
611.33a Stringer syst
¢11.34a Stringer
Diagonal
Longeron
Longeron Construction Example
Tension Summary
for Part 2
for Part 1
Monocoque Shell Buckling Data
Shell Axial Comp, Buckling
Effect of Internal Pressure
Shell Bending Buckling
Effect of Internal Pressure
External Hydrostatic Pressure
Shell Torsion Buckling
Effect of Internal Pressure
Combined Loads Buckling
Conical Shell Buckling
Buckling of Spherical Caps
Fitting Design
Pitting Margins of Safety
Factors of Safety
Bolte
Wate
‘ly Loaded Lugs
Obliquely Loaded Lugs
Riveted Splice:
‘Tnread Design and Strength
Filler (shim) Effects
Curved Beam Data
Tension Clip Allowable Data
Flush Rivet Joints
Blind Rivet Joints
Bolt Strengths
31|Design Check List
31|Margins of Safety
31) Tension Clips
31|Preload Torque Factors for Bolts
1
‘in Plastic Range32|Rockwell and Brinell Hardness Data
3|
35| Minimum I for stiffeners
33| stress-strain curves
3 Sheet and Other Buckling Data
36| Material Properti
35| Joint Design No
39|Fastener/Joint Allowable Data
0] Nut/Cotlar Tension Allowable
43] Bolt Allowable Bending Mosente
44] Bean Fornulas
us| Additional References
Bulkhead, Praze and Arch Analyses
wii P hecome