Professional Documents
Culture Documents
Ratings of Relays
Type Phase and wires Outside view 33W, 12W 34W TZS-AD NOTE ' : Standard, this configuration is used unless otherwise specified. : yes or available. q : Terminals for 120V AC and 240V AC are provided. CAUTION : DO NOT APPLY 240V AC TO THE 12OV AC TERMINAL., BURNOUT CAN RESULT. w : For 415V AC or 440V AC, Please contact to TERASAKI. e : Adjustable type by Dip slide swnch. r : Operating time range and Non-operating time range.
Rated operating time (sec) Operating time range (sec) 0.2~0.36 0.4~0.6 0.8~1.2 1.3~2 Non-operating time range (sec) 0.15 0.38 0.7 1.25
RATINGS Rated control voltage [V AC] 50/60Hz Applicable range Rated sensitivity current [mA] 120V AC 240V AC
0.3
Dimensions [mm] (surface mount) W/H/D Weight [kg] (surface mount) MOUNTING Surface mount Flush mount STANDARD FEATURES Earth leakage detection Output contact Earth leakage indication Reset function Power source required
120 qw 240 96-132 192-264 30 100 300 e 500 1000 below 0.04 0.3 0.5 er 1 2 60/78/100 0.22 ' t 1C y LED (Red) electrical u 1VA
0.5 1 2
u : The output contacts remain until the RESET button is operated. Provided the control power supply fails the contacts automatically reset.
Diameter of transit part [mm] Weighr [kg] Applicable numbers, size and continuous current of wires (IV cable wires) 2 max. continuous current wires max. wire size max.diameter of wire 3 max. continuous current wires max. wire size max.diameter of wire 4 max. continuous current wires max. wire size max.diameter of wire
15 0.2
24 0.3
40 0.7
68 1.1
100 2.0
Outline dimensions
Connection Diagram
z2
z1
31
50 40 36
RESET
TEST
78
NORMAL
LEAKED
78
LED, green (NORMAL) Reset button Response current/ time delay selector switch
AC200/240V AC100/120V COM
31
50 60
4 100
Drilling plan
2M4~0.7 Tapped hole
TZS-AD ZCT wire length 30mA: less than 3m, 100, 300mA: less than 5m, 500, 1000mA: less than 10m Note: The output contacts are hold until the reset button is pressed. Loss of control power resets the contacts automatically. Terminal screw tightening torque: 0.45 0.73 N.m (4.6 7.4 kgf.cm)
0.3 sec
Rated Non-operating current
60 30 20 10 60
0.5 sec
Rated sensitivity current
10
50
Drilling plan
Mounting plate (t=3max.) 24.5
Operating time (S)
0.01 25
50
100
500
1000
0.01 25
50
100
500
1000
0.01 25
50
100
30 20
500
1000
1 sec
Rated sensitivity current Rated Non-operating current
60 30 20 10 5 2 1 0.5 0.2 0.1 0.05 60 30 20 10
2 sec
Rated Non-operating current Rated sensitivity current Non-operating time range
50 100
R 2
RESET
TEST
56 70
42
56
NORMAL
LEAKED
70
52 4 t 106.5
0.01 25
500
1000
TYPE @
H C L
Z2 Z1
C E
46 58
G H
27 30
TYPE ! ! @ @ @
d 15 24 40 68 100
A 30 42 45
B 55 67 71 85 105
D 32 40 51 65 85
E 28 32 62 76 96
F 57 70 90