Professional Documents
Culture Documents
Diemnsions of Ordinary Bolts PDF
Diemnsions of Ordinary Bolts PDF
Table H.58
DIMENSIONS OF ORDINARY BOLT ASSEMBLIES (All dimensions in millimetres) ISO Black Hexagonal Bolts
(BS 4190:2001)[10]
s s k Length r d 30 o Grade 8.8 Head Grade 4.6 Head See Thread Length Table
s m m t
M
e
M
e
8.8
e 30
o o
30
30
30
Thin nut
M12 s d e k r
Created on 20 May 2008 This material is copyright - all rights reserved. Use of this document is subject to the terms and conditions of the Steelbiz Licence Agreement
M24 36.00 24.84 41.60 15.90 1.78 s e m t M12 19.00 21.90 10.00 7.00 M16 24.00 27.70 13.00 9.00 M20 30.00 34.60 16.00 9.00 M24 36.00 41.60 19.00 10.00
Black Washers
(BS 4320:1968)[40] Bolt size
Normal (Form E)
M20 37 3 17 39 3 19 60 5 97
M24 44 4 31 50 4 45 72 6 170
Outside dia Thickness Mass of 1000 washers (kg) Outside dia Thickness Mass of 1000 washers (kg) Outside dia Thickness Mass of 1000 washers (kg)
Thread Lengths
(BS 4190:2001[10], BS 4933:1973[52]) Nominal Bolt Length
Up to/including 125mm Over 125mm up to/including 200 Over 200mm
Fully threaded bolts are recommended as the industry standard, see Section 2.2.
Thread Length
Large (Form F)
1.50
NOTE: Tolerance on nominal thickness (and therefore on mass) may be as much as 30%.
475