Professional Documents
Culture Documents
Figure below shows a shaft mounted in bearings at A and D and having pulleys at B and C. The forces shown acting on the pulley surfaces represent the belt tensions. Change the xx term in the belt tension with your last two digits from your matric card number. The shaft is to be made of AISI 1035 CD steel. Using a conservative failure theory with a design factor of 2, determine the minimum shaft diameter to avoid yielding.
150 mm D.
100 mm
; ;
MB = ____________ Nm
MC
= ____________ Nm (6 marks)
TB = __________ Nm
TC = ___________ Nm (2 mark)
At location B;
At location C;
At location B;
At location C;
(1 mark)
KEY IN ALL YOUR ANSWERS IN THE BOX AT THE EXCEL FILE GIVEN AND SAVE THE EXCEL FILE IN 2003 VERSION FORMAT WITH THE NAME OF YOUR MATRIC CARD NUMBER (e.g. AD000001.xls). THEN SENT THE SOFTCOPY OF THE FILE TO BELOW EMAIL ADDRESS ACCORDING TO YOUR CLASS SECTION
azwir.uthm@gmail.com for BDA 30803 Section 1, 2 & 3 and BDA 3083 Section 1
Please email to your section class leader for BDA 30803 Section 4, 5 & 6