Professional Documents
Culture Documents
How To Install WSUS Server PDF
How To Install WSUS Server PDF
Mathew Mozer |
Contents
PRE-SETUP INFORMATION ........................................................................................................................... 3
Download Software ............................................................................................................................................................................. 3
REPORTING ............................................................................................................................................... 33
Mathew Mozer |
Pre-Setup Information
First you will need to install windows server 2008 with partitions that will be sufficient to handle WSUS Windows Server 2008 will need a primary partition of approximately 20gb and you will also need about a 70gb partition for the update partition. We will go over this later. Download Software Once you have server 2008 installed you will need to download: MS Report Viewer http://www.microsoft.com/downloads/details.aspx?familyid=6AE0AA19-3E6C-474C9D57-05B2347456B1&displaylang=en SQL Server express 2005 http://go.microsoft.com/fwlink/?linkid=65212
1. You will need to setup up your server as a Web server using IIS. 2. Run Server manager and select roles. 3. Select Web server and click next
1. Click next at the next window to begin setup of our web server. 2. First we will need to set the security setting to windows authentication. 3. Under application development we will need to select asp.net. 4. Under management tools select IIS 6 management compatibility.
1. After you click next you will be confronted with a confirm installation screen. 2. Click install to begin the installation.
Mathew Mozer |
As you can see in the roles frame of the server manager window you can see the Web Server is added into roles summary.
Mathew Mozer |
1. Accept the license agreement if you have read and agree. 2. click next
Setup should complete and you should see this screen. Click finish
Mathew Mozer | Install and configure MS Report Viewer SQL Server Express.
1. Run the SQL Express installer. 2. You should be presented with this screen. 3. Choose Run program to continue with installation.
1. You must accept the license agreement to continue the setup process. 2. Click next
Mathew Mozer | Install and configure MS Report Viewer SQL Server Express.
1. It now shows you all the components that are going to be installed. 2. Click Install.
1. Installation should be complete and this screen should appear. 2. Click next to continue
Mathew Mozer | Install and configure MS Report Viewer SQL Server Express.
1. Choose full server installation so we can also get the administration console. 2. Click next.
1. Once again you must accept the License agreement 2. Click next.
10
1. We change the folder path to a drive that has a enough space to hold all updates that are available. 2. Click Next
11
12
Configuration 1. You will be presented with the WSUS configuration screen click next till you are presented with this screen. 2. You should change the option bubble to synchronize with another WSUS server. 3. Set it to 10.145.145.14 with port 80 which is default. (172.16.1.100)
1. Choose Start connect to connect to the server you previously entered in the last screen.
Watch the status bar move. It will synchronize 10% then allow you to move on.
13
1. Choose the languages you need and choose next. I only needed English.
1. Now its time to choose when you synchronize your time to update. 2. I choose to update automatically at 3:22 am. 3. Choose next
14
1. Click options on the left side then click update files and languages. 2. Then this window will show up. 3. Choose to download express installation files. 4. click ok.
If you are currently synchronizing you will have to wait till this that is complete to save these settings.
15
1. From the options link in the left pane choose automatic approvals. 2. After you this window appears click all classifications which normally isnt a good practice but we are just doing it for this exercise.
1. Get the properties of the computers by clicking the computer settings in the option pane
16
1. Click the + on the left pane next to Updates 2. click all updates 3. Click the dropdown box next to status in the main pane 4. choose any In the approval drop down. 5. Choose unapproved.
17
18
1. Expand Computer Configuration 2. Expand policies 3. Expand admin templates 4. Expand windows components 5. Expand Windows update
19
1. Put https:// and the FQDN of your server in the specify intranet Microsoft update service location
1. Select Automatic detection frequency properties. 2. Choose enabled set which interval you want
20
1. Click ok
21
1. Edit the GPO you just created by right clicking and choose edit.
2. 3. 4. 5. 6. Expand Computer Configuration Expand policies Expand admin templates Expand windows components Expand Windows update Enable Client Side
1. Do the above steps in the default domain controller GPO. And set the group name to the group you created in WSUS for servers.
22
Client Installation
Once you connect any computer to the domain. It will automatically sync to WSUS and you can check for updates
23
1. Open Server Manager and click at a role. 2. Click next after you click active directory certificate services. 3. Click next
1. When you click certification authority there are other dependencys and you will need to add those too.
1. Click Next
24
1. Choose Root CA if this is the only server. Create a new private key unless you have one but on a fresh install you dont.
25
26
Dbl click server certificates in the center pane 6. On the very right pane choose Create domain certificate.
1. The common name is the computername + domain name 2. Everything else can be anything
27
28
1. Click default web site then bindings on the right side 2. Click add
29
1. Choose the SSL certificate you created earlier and change the type to HTTPS with all assigned addresses
1. Click clientwebserver under default side in the IIS settings. 2. Dbl click ssl settings
30
31
32
Reporting
1. Open WSUS from administration tools 2. Click reports on the right pane 3. Click update detailed status
33
5. This is a report that was ran to show updates that were successfully installed.
34