Professional Documents
Culture Documents
DSL605EW KB Connecting To The Internet
DSL605EW KB Connecting To The Internet
RECONFIGURING TO CONNECT TO THE INTERNET USING THE WAN PORT (ETH PORT 4)
A. CONNECT THE CABLES
1. Connect the DSL605EWs Ethernet Port 4 to the wall outlet 2. Connect your computer to any of the Ethernet Ports 1-3 of the DSL605EW 3. Connect the power adapter to the DSL605EW's power adapter jack
B. RESET TO FACTORY DEFAULTS 1. Locate the reset buttonhole behind the DSL605EW 2. Use a pin to press the button for 10 seconds until the Power indicator turns red then green 3. You may reconfigure the DSL605EW when the front indicators are stable
C. CONNECT TO THE INTERNET 1. Open your Internet browser 2. On the address box, type http://192.168.1.1
Page 2 of 4
4. On the left panel menu, Click WAN and select 4th option quickstart or GPON or any name.
5. Click on Delete
Page 3 of 4
Page 4 of 4
9. Click on Apply then click on Connect, will successfully connect to the internet.
Note: If the connection attempt fails, double-check the username and password from the service provider.