Professional Documents
Culture Documents
Trouble Reset Bizhub 250-350
Trouble Reset Bizhub 250-350
Initial Mode
bizhub 200/250/350
[2] [1]
4040F3C533DA
1. Remove the Compact Flash Cover [1]. 2. Press the Warm Restart switch [2].
Adjustment / Setting
4040F3C521DA
3. When appears at the center on the left-hand side of the screen, enter 3 from the 10-Key Pad. 4. Enter the 8-digit service code and touch [END]. (Default value: 00000000) NOTE When [END] is touched after a wrong service code has been entered, the Basic screen reappears. At the fourth access after entries of three wrong access codes, [END] is not available on the screen. It is therefore necessary to turn OFF and ON the Main Power Switch. If you forget the service code, it becomes necessary to replace the RAMS Board with a new one. Take necessary steps not to forget the service code. The RAMS Board is not available as a replacement part. If it requires replacement, contact Office Printing Support Division by way of CSES. 5. Select a function. 15.1.1 Exiting Touch [Exit].
208