Professional Documents
Culture Documents
MarshallMixDesign-1622 v13
MarshallMixDesign-1622 v13
Reset Form
Date: Class & Grading of mixture: Grade of asphalt: Mineral filler: Phone:
Percent asphalt by mass of total mix1, (Pb) Air voids (Va) Voids in mineral aggregate (VMA) Maximum specific gravity (Gmm ) Recommended plant mixing temperature,
(Attach Temperature Viscosity Curve)
6. Effective specific gravity of aggregate (Gse) 7. Marshall stability, 8. Marshall flow, Gradation Designation:
Yes
No
SPECIFIC GRAVITY AND ABSORPTION
Sieve Sizes
Allowable Deviation4 %
Combined Aggregate
Bulk SSD SG
Apparent SG (Gsb)
Absorption
1 2 3 4
Establish asphalt cement content (percent by mass of mix) to the nearest 0.01 percent. See contract for moisture susceptibility test method: AASTHO T 165/T 167 or AASTHO T 283. Establish target values to the nearest 0.1 percent as a part of the job mix formula. Allowable deviations plus or minus from established target values.
Page 1 of 5
Stockpile Description
Blend Ratio % % % % %
0
Aggregate Properties
Property LA Abrasion, % - Grading AASHTO T 96 Sodium Sulfate Soundness, % AASHTO T 104 Durability index (Coarse) AASHTO T 210 Durability index (Fine) AASHTO T 210 Result Specification Property Fractured Faces, % - Select ASTM D 5821 Sand Equivalent AASHTO T 176, Alt method #2, reference method Other: Other: Result Specification
Page 2 of 5
Test Results for Each of the Individual Moisture Susceptibility Test Specimens Percent asphalt binder: Antistrip, type, amount: Sample I.D. Dry Wet Dry Bulk Specific Gravity Wet Dry Air Voids Wet Dry Strength Wet Retained Strength, %
Form FHWA 1622 (03-11) Page 3 of 5
AASHTO T 283
6 inch Yes
4 inch No Average
Height
graph it
MARSHALL FLOW
MARSHALL STABILITY
VMA
Page 4 of 5
RAP 1
RAP 2
% of RAP in Mixture Dry Gradation T 308 Burned Gradation Dry Gradation T 308 Burned Gradation
Sieve Size
Specific Gravity
Gse
Gsb
1.00 1.010
1.00 1.010
Remarks:
Page 5 of 5