Professional Documents
Culture Documents
Lines & Dimension
Lines & Dimension
Lecture 1: Introduction
Lecturer: Dr. Bidisha Ghosh (bghosh@tcd.ie)
Course Structure
Graphics
Hand Drawing (part 1) -Dr. B. Ghosh Hand Drawing (part 2) -Dr. G. ODonnell
CAE
AutoCAD-Dr. S. Pavia Pspise--Dr. A. Kokaram
Assessment
Examination: 65% of the overall mark 3 sections (A, B and C) 2 questions per section 3 questions to be answered, one from each section
Dr B. Gosh : Sections A and B Dr G. ODonnell : Section C
Labs 35% - assessed by coursework 10 % AutoCAD 10 % Pspice 10% D.O. Tutorials Dr B. Gosh 5 % D.O. Assignment Dr G. ODonnell
Time Table
Isometric Projections
Auxiliary Views Perspective : One-Point Perspective : Two-Point
Evaluation
Examination (Sections A & B)
(2/3 of the total examination marks)
Continuous Assessment
(10% of the total course marks) four drawing office tutorials
Waterfall M. C. Escher
Topics of Interest
Drawing Instruments Lines Dimensioning
10
DRAWING INSTRUMENTS
1. Drawing Board
11
DRAWING INSTRUMENTS
2. Drawing Sheets
A Series Formats (mm) 841 1189 A0 594 841 A1 420 594 A2 297 420 A3 210 297 A4 148 210 A5 105 148 A6 74 105 A7
12
DRAWING INSTRUMENTS
13
DRAWING INSTRUMENTS
14
DRAWING INSTRUMENTS
15
DRAWING INSTRUMENTS
16
DRAWING INSTRUMENTS
Compasses
Divider
Protractor Ruler/Scale Pencil, Eraser
17
DRAWING LINES
TYPES OF LINES
3 Main Types
18
DRAWING LINES
19
DIMENSIONING
Position of DL
20
DIMENSIONING
Alignment of DL
DL of Small Features
Dimensioning Angles
Dimensioning Circles
21
DIMENSIONING
22
DIMENSIONING
23
Reference Books
Technical Draughtsmanship
By Eanna OBroin Engineering Drawing with Worked Examples By M.A. Parker & F. Pickup Technical Drawing By F. E. Giesecke, A. Mitchell, H. C. Spencer, I. L. Hill, J. T. Dygdon, J. E. Novak
24