Professional Documents
Culture Documents
Features
Seat seals may be replaced in the eld if necessary Valve has a compact forged body with large wrench pads for easy installation Friction between body and poppet is reduced by a Teon band which permits easy movement of the poppet when opening or resealing the valve Three pressure ranges: 2075 psig (15 bar), 75350 psig (524 bar), 3501500 psig (24103 bar) Brass or 316 stainless steel construction Relief settings may be adjusted externally by opening or closing the screw and lock-nut on top of the bonnet Models are furnished in angle pattern with NPT male inlet by NPT female outlet connections
Technical Data
BODY MATERIAL* MAXIMUM OPERATING PRESSURE OPERATING TEMPERATURE RANGE ORIFICE Cv FACTOR 316 stainless steel, brass 3000 psig (207 bar) @ 70 F (211 kg/cm @ 21 C)
relief valves
Brass: -20 F to +200 F (-29 C to +93 C) Stainless steel: -20 F to +350 F (-29 C to +177 C) 0.250 (6.35mm) 0.1 full open
HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com
6500 Series
Materials of Construction
1 2 3 4 5 6 7 PART Body Bonnet Set screw O-ring (upper) O-ring (lower) Compression spring Seat holder BRASS Brass Brass Carbon steel Buna N Teon / Buna N* Music wire Brass (TFE-coated) 316 STAINLESS STEEL 316 stainless steel 303 stainless steel 303 stainless steel Viton B Teon / Viton B** 17-7 PH stainless steel 316 stainless steel (TFE-coated)
For models 6528L4B and 6548L4Y. * For models 6512L4B and 6514L4B ** For models 6532L4Y and 6532L4Y
Dimensions
PRESSURE RANGE 2075 psig (15 bar) 75350 psig (524 bar) 3501500 psig (24103 bar) inch mm inch mm inch mm D 31316 97 31316 97 31316 97 E 1 38 1 38 1 38
Teon is a registered trademark of the DuPont Company. Viton is a registered trademark of DuPont Dow Elastomers.
19