Professional Documents
Culture Documents
Nf61v-M2a Nf61s-M2a 1030C B
Nf61v-M2a Nf61s-M2a 1030C B
The vendor makes no representations or warranties with respec t to the contents here and s pecially disclaims any implied warranties of merchantability or fitness for any purpose. Further the vendor reserves the right to revise this publication and to make c hanges to the c ontents here without obligation to notify any party beforehand. D uplication of this publication, in part or in whole, is not allowed without first obtaining the vendors approval in writing.
The content of this users manual is subject to be c hanged without notice and we will not be res ponsible for any mis takes found in this users manual. All the brand and produc t names are trademarks of their respec tive companies .
German................................................................................................36 France..................................................................................................38 Italian..................................................................................................40 Spanish ................................................................................................42 Portuguese ...........................................................................................44 Polish ...................................................................................................46 Russian ................................................................................................48 Arabic..................................................................................................50 Japanese ..............................................................................................52
1.2
PACKAGE CHECKLIST
FDD Cable X 1 HDD Cable X 1 Use rs Manual X 1 Fully Se tup Drive r C D X 1 Rear I/O Panel for ATX Case X 1 Se rial ATA Cable X 1 (optional) USB 2.0 Cable X1 (optional) S/PDIF Cable X 1 (optional) Se rial ATA Powe r Switch Cable X 1 (optional) Printe r Port Cable X 1 (optional)
Motherboard Manual
1.3
CPU
AMD Sempron / Ath lon 64 / Ath lon 64 FX / Althlon 64 X2 processors Supports Hyper Tran sport and Cool= n =Quiet
FSB Chipset
Super I/O
Provides the most commonly u sed legacy Super Provides the most commonly u sed legacy Super I/O function ality . Low Pin Coun t In terface DIMM Slots x 2 I/O function ality . Low Pin Coun t In terface DIMM Slots x 2
Main Memory
Each DIMM supports 256/512MB & 1G B DDR2 Each DIMM supports 256/512MB & 1G B DDR2 Max Memory Capicity 2G B Dual Channel Mode DDR2 memory modu le Supports DDR2 400 / 533 / 667 / 800 Max Memory Capicity 2G B Dual Channel Mode DDR2 memory modu le Supports DDR2 400 / 533 / 667 / 800 Integrated in MCP61 S Ch ipset Max Shared Video Memory is 256MB Integrated IDE Con troller
Graphics
Integrated in MCP61 V Ch ipset Max Shared Video Memory is 256MB Integrated IDE Con troller
IDE
Ultra DMA 33 / 66 / 100 / 133 Bu s Master Mode Ultra DMA 33 / 66 / 100 / 133 Bu s Master Mode supports PIO Mode 0 ~4 Integrated Serial ATA Con troller supports PIO Mode 0 ~4 Integrated Serial ATA Con troller Data tran sfer rates up to 3.0 Gb/s. SATA Version 2.0 specification compliant. Realtek 8201CL PHY 10 / 100 Mb/s Auto-Negotiation ALC861VD(Ver 6 .x) / ALC888(Ver 5.x) 5.1 ch annels audio out (Ver 6 .x) 7.1 ch annels audio out (Ver 5 .x) Intel High -Defin ition Au dio support x2 x1 x1 PCI slot PCI Express x 16 slot (x8 Speed) PCI Express x 1 slot x2 x1 x1
SATA II
Data tran sfer rates up to 3.0 Gb/s. SATA Version 2.0 specification compliant.
LAN
Realtek 8201CL PHY 10 / 100 Mb/s Auto-Negotiation ALC861VD(Ver 6 .x) / ALC888(Ver 5.x)
Sound
5.1 ch annels audio out (Ver 6 .x) 7.1 ch annels audio out (Ver 5 .x) Intel High -Defin ition Au dio support PCI slot
Slots
Motherboard Manual
1.4
PS/2 Mouse
PS/2 Keyboard
COM1
VGA
USBX2
USBX2
1.5
PS/2 Mouse
COM1
VGA
USBX2
USB X2
Cente r Re ar Side
1.6
JKBMS1
JATXPWR2
JCOM1 DIMMA1
JUSBV1
JUSB1
JATXPWR1
MCP61V or MCP61S
JCI 1(Opt ional)
SAT A2
SAT A1
LAN
PEX16_1
PCI1
JSPDIF_IN1(Opt ional)
BAT1
JCMOS1
JUSB2
BI OS PCI2
FDD1 Super I/O
JUSB3 JSFAN1 JUSB V2 JP A NE L1
Codec
JPRNT1
IDE1
JUS BLAN1
DIMMB1
Socket
JVGA1
A M2
Motherboard Manual
1.7
JKBMS1
JATXPWR2
JCOM1 DIMMA1
JUSBV1
JUSB1
JATXPWR1
MCP61V or MCP61S
JCI 1(Opt ional)
SAT A2
SAT A1
LAN
PEX16_1
PCI1
JSPDIF_IN1(Opt ional)
BAT1
JCMOS1
JUSB2
BI OS PCI2
FDD1 Super I/O
JUSB3 JSFAN1 JUSB V2 JP A NE L1
Codec
JPRNT1
IDE1
JUS BLAN1
DIMMB1
Socket
JVGA1
A M2
CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation.
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation.
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
JCFAN1
JSFAN1: System Fan He ader JNFAN1: North Bridge Fan Heade r (Optional)
JNFAN1 (Optional)
1 3
Pin 1 2 3
JSFAN1
Note:
The JCFAN1JSFAN1 and JNFAN1 support 4-pi n and 3-pin head c onnector. When connecting with wires onto c onnectors, please note that the red wire is the positi ve and shoul d be connected to pi n#2, and the bl ac k wire is Ground and s hould be c onnected to GND.
Motherboard Manual
2.3
A. Memory Modules
DIMMA1 DIMMB1
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
2.
Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated.
10
B. Memory Capacity
DIMM Socket Location DIMMA1 DIMMB1 DDR Module 256MB/512MB/1024MB *1 256MB/512MB/1024MB *1 Total Memory Size Max memory 2GB.
(O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16)
11
Motherboard Manual
2.4
33
40
39
12
PEX16_1: PCI-Express x16 Slot (x1 Spee d) (for NF61V Micro AM2 SE)
PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 250MB/s simultaneously per direction, f or an aggregate of 500MB/s totally.
PEX16_1: PCI-Express x16 Slot (x8 Spee d) (for NF61S Micro AM2 SE)
PCI-Express 1.0a compliant. Maximum theoretical realized bandwidth of 2GB/s simultaneously per direction, f or an aggregate of 4GB/s totally.
PEX1_1
PEX16_1
PCI1
PCI2
13
Motherboard Manual
Pin opened
Pin closed
Pin1-2 closed
3.2
PWR_LED O n/ Off
+ + + SPK
16 8
RST
HL ED
Pin 1 2 3 4 5 6 7 8
Assignment +5V N/A N/A Speaker HDD LED (+) HDD LED (-) Ground Reset control
Pin 9 10 11 12 13 14 15 16
Assignment Sleep control Ground N/A Power LED (+) Power LED (+) Power LED (-) Power button Ground
Power-on button
14
1
Pin Assignment Pin Assignment
13
13 14 15 16 17 18 19 20 21 22 23 24
+3.3V -12V Ground PS_ON Ground Ground Ground NC +5V +5V +5V Ground
1 2 3 4 5 6 7 8 9 10 11 12
+3.3V +3.3V Ground +5V Ground +5V Ground PW_OK Standby Voltage+5V +12V +12V +3.3V
Pin 1 2 3 4
15
Motherboard Manual
JUSB2 JUSB3
2 1 10 9
3 1
JUSBV1
3 1
Pin 1-2 close
3 1
JUSBV2
Note:
In order to s upport this function Power-On s ystem vi a USB devic e, JUSBV1/ JUSBV2 jumper cap should be plac ed on Pin 2-3 indi viduall y .
16
10
6 7 8 9 10
Pin
Assignment
1 2 3 4
4 1
17
Motherboard Manual
Pin
Assignment
1 2
18
25
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13
Assignment -Strobe -ALF Data 0 -Error Data 1 -Init Data 2 -Scltin Data 3 Ground Data 4 Ground Data 5
Pin 14 15 16 17 18 19 20 21 22 23 24 25 26
Assignment Ground Data 6 Ground Data 7 Ground -ACK Ground Busy Ground PE Ground SCLT Key
Pin
Assignment
1 2 3 4 5 6 7
SATA2
SATA1
19
Motherboard Manual
1 3
Note: 1. When JDDRII_22V1 jumper cap is placed on Pin 1-2, memory voltage can be manually adjusted in CMOS setup screen. 2. When JDDRII_22V1 jumper cap is placed on Pin 2-3, memory voltage will be f ixed at 2.2V automatically, and cant be adjusted under COMS setup. Bef ore setting memory over-v oltage, please ensure that your DDR2 supports up to 2.2V . (Consult your DDR2 supplier)
Pin
Assignment
1 2 3
20
Pin
Assignment
1 2 3
21
Motherboard Manual
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. RAID 1: RAID 1 defines techniques for mirroring data.
4.3
RAID 0:
The controller stripes data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment. This technique reduces overall disk access time and offers high bandwidth.
22
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active volume or drive is corrupted or becomes unavailable because of a hardware failure. RAID techniques can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media.
For more detailed setup information, please refer to the Driver CD, or go to http://www.nvidia.com/page/pg_20011106217193.html to download NVIDIA nForce Tutorial Flash.
23
Motherboard Manual
The setup guide will auto detect your motherboard and operating system. Note:
If this window didnt show up after you ins ert the Driver CD, please use file brows er to locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will list the compatible driver for your motherboard and operating system. Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide will list the software available for your system, click on each software title to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver CD. Click on the Manual icon to browse for available manual. Note:
You will need Acrobat R eader to open the manual file. Pleas e download the latest version of Acrobat Reader software from http://www.adobe.com/products/acrobat/readstep 2.html
24
5.2
Beep Sound One long beep followed by two short beeps High-low siren sound
One Short beep when system boot-up No error found during POST Long beeps every other second No DRAM detected or install
5.3
A. BIOS Update
In this Case, please follow the procedure below to restore the BIOS: 1. Make a bootable floppy disk. 2. Download the Flash Utility AWDFLASH.exe from the Biostar website: www.biostar.com.tw 3. Confirm motherboard model and download the respectively BIOS from Biostar website. 4. Copy AWDFLASH.exe and respectively BIOS into floppy disk. 5. Insert the bootable disk into floppy drive and press Enter. 6. System will boot-up to DOS prompt. 7. Type Awdflash xxxx.bf/sn/py/r in DOS prompt. (xxxx means BIOS name.) 8. System will update BIOS automatically and restart. 9. The BIOS has been recovered and will work properly.
25
Motherboard Manual
B. CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again. In this case, please double check: 1. The CPU cooler surface is placed evenly with the CPU surface. 2. CPU fan is rotated normally. 3. CPU fan speed is fulfilling with the CPU speed. After confirmed, please follow steps below to relief the CPU protection function. 1. Remove the power cord from power supply for seconds. 2. Wait for seconds. 3. Plug in the power cord and boot up the system. Or you can: 1. Clear the CMOS data. (See Close CMOS Header: JCMOS1 section) 2. Wait for seconds. 3. Power on the system again.
26
5.4
1.
TROUBLESHOOT ING
Probable Solution 1. Make sure power cable is No power to the system at all securely plugged in. Power light dont illuminate, f an inside power supply does not turn 2. Replace cable. on. 3. Contact technical support. 2. Indicator light on key board does not turn on. System inoperativ e. Keyboard lights Using even pressure on both ends of are on, power indicator lights are lit, the DIMM, press down firmly until the and hard driv e is spinning. module snaps into place. System does not boot from hard disk 1. driv e, can be booted f rom optical driv e. Check cable running from disk to disk controller board. Make sure both ends are securely plugged in; check the driv e type in the standard CMOS setup. 2. Backing up the hard drive is extremely important. All hard disks are capable of breaking down at any time. 1. Back up data and applications System only boots f rom optical driv e. f iles. Hard disk can be read and applications can be used but booting from hard disk 2. Ref ormat the hard driv e. is impossible. Re-install applications and data using backup disks. Screen message says Invalid Rev iew systems equipment. Make sure Conf iguration or CMOS Failure. correct inf ormation is in setup. Cannot boot system after installing 1. Set master/slave jumpers second hard driv e. correctly. 2. Run SETUP program and select correct driv e types. Call the drive manuf acturers f or compatibility with other drives.
27
Motherboard Manual
CHAPTER 6: WARPSPEEDER
6.1
[WarpSpeeder], a new powerful control utility, features three user-friendly functions including Overclock Manager, Overvoltage Manager, and Hardware Monitor. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. The Overvoltage Manager, on the other hand, helps to power up CPU core voltage and Memory voltage. The cool Hardware Monitor smartly indicates the temperatures, voltage and CPU fan speed as well as the chipset information. Also, in the About panel, you can get detail descriptions about BIOS model and chipsets. In addition, the frequency status of CPU, memory, AGP and PCI along with the CPU speed are synchronically shown on our main panel. Moreover, to protect users' computer systems if the setting is not appropriate when testing and results in system fail or hang, [WarpSpeeder] technology assures the system stability by automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one.
6.2
SYST EM REQUIREMENT
OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you use Windows XP, you do not need to install DirectX 8.1.)
28
6.3
1. Execute the setup execution file, and then the following dialog will pop up. Please click Next button and follow the default procedure to install.
2. When you see the following dialog in setup procedure, it means setup is completed. If the Launch the WarpSpeeder Tray Utility checkbox is checked, the Tray Icon utility and [WarpSpeeder] utility will be automatically and immediately launched after you click Finish button.
Usage :
The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand.
29
Motherboard Manual
6.4
WARPSPEEDER
Whenever the Tray Icon utility is launched, it will display a little tray icon on the right side of Windows Taskbar.
1. Tray Icon:
This utility is responsible for conveniently invoking [WarpSpeeder] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following figure. The Launch Utility item in the popup menu has the same function as mouse left-click on tray icon and Exit item will close Tray Icon utility if selected.
30
2. Main Panel
If you click the tray icon, [WarpSpeeder] utility will be invoked. Please refer to the following figure; the utilitys first window you will see is Main Panel.
31
Motherboard Manual
3. Voltage Panel
Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is No. If you want to get the best performance of overclocking, we recommend you click the option Yes.
32
4. Overclock Panel
Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.
b.
Recovery Dialog button: Pop up the following dialog. Let user select a restoring way if system need to do a fail-safe reboot.
33
Motherboard Manual c. Auto-overclock button: User can click this button and [WarpSpeeder] will set the best and stable performance and frequency automatically. [WarpSpeeder] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog function. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting. d. Verify button: User can click this button and [WarpSpeeder] will proceed a testing for current frequency. If the testing is ok, then the current frequency will be saved into system registry. If the testing fail, system will do a fail-safe rebooting. After reboot, the [WarpSpeeder] utility will restore to the hardware default setting or load the verified best and stable frequency according to the Recovery Dialogs setting.
Note: Because the testing programs, invoked in Auto-overclock and Verify, include DirectDraw, Direct3D and DirectShow tests, the DirectX 8.1 or newer runtime library is required. And please make sure y our display cards color depth is High color (16 bit) or True color( 24/32 bit ) that is required f or Direct3D rendering.
34
6. About Panel
Click the about button in Main Panel, the button will be highlighted and the About Panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You can also get the mainboards BIOS model and the Version number of [WarpSpeeder] utility.
Note :
Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [WarpSpeeder] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not interfere other panels functions. This property can make [WarpSpeeder] utility more robust.
35
Motherboard Manual
Unterst tzt HyperTran sport mit einer Bandbreite Unterst tzt HyperTran sport mit einer Bandbreite von bis zu 1 GHz MCP61V ( GeForce 6100- 400) ITE 8716F von bis zu 1 GHz MCP61S ( GeForce 6100- 405) ITE 8716F Bietet die hufig verwendeten alten Super E/A-Funktionen . Low Pin Coun t-Schnittstelle DDR2 DIMM-Steckpltze x 2 Jeder DIMM unterst tzt 256/512MB & 1G B DDR2. Max. 2GB Arbeitsspeicher Dual-Kanal DDR2 Speichermodu l Unterst tzt DDR2 400 / 533 / 667 / 800 registrierte Integrierter MCP61 S Ch ipsatz Max. 256MB gemein sam benu tzter Videospeicher Integrierter IDE-Con troller
Super E/A
Bietet die hufig verwendeten alten Super E/A-Funktionen . Low Pin Coun t-Schnittstelle DDR2 DIMM-Steckpltze x 2 Jeder DIMM unterst tzt 256/512MB & 1G B
Arbeitsspeic her
DDR2. Max. 2GB Arbeitsspeicher Dual-Kanal DDR2 Speichermodu l Unterst tzt DDR2 400 / 533 / 667 / 800 registrierte Integrierter MCP61 V Ch ipsatz
Grafik
Max. 256MB gemein sam benu tzter Videospeicher Integrierter IDE-Con troller
IDE
Ultra DMA 33 / 66 / 100 / 133 Bu s Master-Modus Ultra DMA 33 / 66 / 100 / 133 Bu s Master-Modus Unterst tzt PIO-Modu s0 ~4, Integrierter Serial ATA-Controller Unterst tzt PIO-Modu s0 ~4, Integrierter Serial ATA-Controller Daten tran sferrate bis zu 3Gb/s
SATA II
Konform mit der SATA-Spezifikation Version 2.0 . Konform mit der SATA-Spezifikation Version 2.0 . LAN Realtek 8201CL PHY 10 / 100 Mb/s Auto-Negotiation ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Audio-Code 5.1-Kanal-Audioau sgabe (VE R6 .X) c 7.1-Kanal-Audioau sgabe (VE R5 .X) Unterst tzt In tel High-Defin ition Audio Realtek 8201CL PHY 10 / 100 Mb/s Auto-Negotiation ALC861VD(VE R 6.X) / ALC888(VER 5 .X) 5.1-Kanal-Audioau sgabe (VE R6 .X) 7.1-Kanal-Audioau sgabe (VE R5 .X) Unterst tzt In tel High-Defin ition Audio
36
Sonderfun k NVIDIA nTunes tionen Unterst tzt RAID 0 / 1 Windows 2000 / XP / VISTA OS-Un terst Biostar beh lt sich das Rech t vor, ohne tzung Ankndigung die Un tersttzung fr ein
Betriebssystem hin zuzufgen oder zu en tfern en. Betriebssystem hin zuzufgen oder zu en tfern en.
37
Motherboard Manual
FRANCE
NF61V Micr oA M2 SE Socket AM2 UC Processeu rs AMD Athlon 64 / Athlon 64 FX / Ath lon 64 x2/ Sempron NF61S Micro A M2 SE Socket AM2 Processeu rs AMD Athlon 64 / Athlon 64 FX / Ath lon 64 x2/ Sempron
sport et Cooln Quiet Prend en charge Hyper Tran sport et Cooln Quiet Prend en charge Hyper Tran Bus f rontal Chipset Prend en charge Hyper Tran sport ju squ' une bande passan te de1 GHz MCP61V ( GeForce 6100- 400) ITE 8716F Super E/S Fourn it la fon ctionnalit de Super E/S patrimoniales la plus u tilise. Interface faible compte de broches Fentes DDR2 DIMM x 2 Chaque DIMM prend en charge des DDR2 de Mmoire prin cipale 256/512 Mo et 1Go Capacit mmoire maximale de 2 Go Prend en charge Hyper Tran sport ju squ' une bande passan te de1 GHz MCP61S ( GeForce 6100- 405) ITE 8716F Fourn it la fon ctionnalit de Super E/S patrimoniales la plus u tilise. Interface faible compte de broches Fentes DDR2 DIMM x 2 Chaque DIMM prend en charge des DDR2 de 256/512 Mo et 1Go Capacit mmoire maximale de 2 Go
Module de mmoire DDR2 mode double voie Module de mmoire DDR2 mode double voie Prend en charge la DDR2 400 / 533 / 667 / 800 Prend en charge la DDR2 400 / 533 / 667 / 800 Graphiques Integr dan s la ch ipset MCP61 V Mmoire vido partage maximale de 256 Mo Contrleur IDE intgr IDE Integr dan s la ch ipset MCP61 S Mmoire vido partage maximale de 256 Mo Contrleur IDE intgr
Mode prin cipale de Bus Ultra DMA 33 / 66 / 100 / Mode prin cipale de Bus Ultra DMA 33 / 66 / 100 / 133 Prend en charge le mode PIO 0~4 , Contrleur Serial AT A intg r : 133 Prend en charge le mode PIO 0~4 , Contrleur Serial AT A intg r : Taux de tran sfert jusqu ' 3 Go/s. Conforme la spcification SATA Version 2 .0 Realtek 8201CL PHY 10 / 100 Mb/s ngociation au tomatique ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Sortie audio 5 .1 voies (VER 6 .X) Sortie audio 7 .1 voies (VER 5 .X) Prise en charge de l'audio haute dfin ition In tel Fente PCI Slot PCI Express x16 (x8) Slot PCI Express x 1 x2 x1 x1
SATA II
Taux de tran sfert jusqu ' 3 Go/s. Conforme la spcification SATA Version 2 .0
LAN
Realtek 8201CL PHY 10 / 100 Mb/s ngociation au tomatique ALC861VD(VE R 6.X) / ALC888(VER 5 .X)
Codec audio
Sortie audio 5 .1 voies (VER 6 .X) Sortie audio 7 .1 voies (VER 5 .X) Prise en charge de l'audio haute dfin ition In tel Fente PCI x2 x1 x1
Fentes
38
Connecteu r d'entre S/PDIF(en option) x1 Connecteu r Embase de ven tilateur UC embarqu Embase de ven tilateur systme Embase d'effacemen t CMOS Connecteu r USB Connecteu r de Port d'imprimante x1 x1 x1 x2 x1
Connecteu r d'entre S/PDIF(en option) x1 Embase de ven tilateur UC Embase de ven tilateur systme Embase d'effacemen t CMOS Connecteu r USB Connecteu r de Port d'imprimante x1 x1 x1 x2 x1
Embase d'ou verture de chssis(en option)x1 Connecteu r d'alimen tation (24 broch es) Connecteu r d'alimen tation (4 broch es) Clavier PS/2 Souris PS/2 E/S du panneau arrire Port srie Port VG A Port LAN Port USB Fiche audio (Ver 6 .x) Fiche audio (Ver 5 .x) Dimen sions de la carte Fonctionnali ts spciales 207 mm (l) X 244 mm (H) x1 x1 x1 x1 x1 x4 x3 x6 x1 x1
Embase d'ou verture de chssis(en option)x1 Connecteu r d'alimen tation (24 broch es) Connecteu r d'alimen tation (4 broch es) Clavier PS/2 Souris PS/2 Port srie Port VG A Port LAN Port USB Fiche audio (Ver 6 .x) Fiche audio (Ver 5 .x) 207 mm (l) X 244 mm (H) x1 x1 x1 x1 x1 x4 x3 x6 x1 x1
NVIDIA nTunes Prise en charge RAID 0 / 1 Windows 2000 / XP / VISTA Biostar se rserve le droit d'ajouter ou de
s pravis. supprimer le support de SE avec ou san s pravis. supprimer le support de SE avec ou san
39
Motherboard Manual
IT ALIAN
NF61V Micr oA M2 SE Socket AM2 NF61S Micro A M2 SE Socket AM2
Processori AMD Athlon 64 / Athl on 64 FX Processori AMD Athlon 64 / Athl on 64 FX CPU / Athlon 64 x 2/ Sempr on Supporto di Hyper Tra nsport e CoolnQuiet FSB Chipset Supporto di Hyper Transport fi no a1 GHz di larghezza di ba nda MCP61V ( GeForce 6100- 400) ITE 8716F Super I/O / Athlon 64 x 2/ Sempr on Supporto di Hyper Tra nsport e CoolnQuiet Supporto di Hyper Transport fi no a1 GHz di larghezza di ba nda MCP61S ( GeForce 6100- 405) ITE 8716F
Fornisce le funzio nalit legacy Super I/O Fornisce le funzio nalit legacy Super I/O usate pi comunemente. Interfaccia LPC (L ow Pin Count) Alloggi DIMM DDR 2 x 2 Ciascun DIMM supporta DDR 2 usate pi comunemente. Interfaccia LPC (L ow Pin Count) Alloggi DIMM DDR 2 x 2 Ciascun DIMM supporta DDR 2 256/512MB e 1GB Capacit massima della memori a 2GB
Memoria principale
Modulo di memoria DDR2 a canale doppi o Modulo di memoria DDR2 a canale doppi o Supporto di DDR2 400 / 533 / 667 / 800 Supporto di DDR2 400 / 533 / 667 / 800 Integrata nel Chi pset MCP61V Grafica Integrata nel Chi pset MCP61S
La memoria video condivisa massima di La memoria video condivisa massima di 256MB Controller IDE i ntegrato 256MB Controller IDE i ntegrato
IDE
Modalit Bus Master Ultra DMA 33 / 66 / Modalit Bus Master Ultra DMA 33 / 66 / 100 / 133 Supporto modalit PIO Mode 0- 4 Controller Serial ATA inte grato 100 / 133 Supporto modalit PIO Mode 0- 4 Controller Serial ATA inte grato
Velocit di trasferimento dei dati fi no a 3 Velocit di trasferimento dei dati fi no a 3 SATA II Gb/s. Compatibile specifiche SATA Versione 2.0. LAN Realtek 8201CL PHY Negoziazione automatica 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Uscita audio 5.1 ca nali (VER 6.X) Codec audio Uscita audio 7.1 ca nali (VER 5.X) Supporto audio High- Defi nition (HD) Intel Gb/s. Compatibile specifiche SATA Versione 2.0. Realtek 8201CL PHY Negoziazione automatica 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Uscita audio 5.1 ca nali (VER 6.X) Uscita audio 7.1 ca nali (VER 5.X) Supporto audio High- Defi nition (HD) Intel
40
Connettore input S/PDIF (optio nal) x1 Connettori su scheda Collettore ventolina CPU Collettore ventolina sistema Collettore cancellazione CMOS Connettore USB Connettore Porta stampa nte x1 x1 x1 x2 x1
Connettore input S/PDIF (optio nal) x1 Collettore ventolina CPU Collettore ventolina sistema Collettore cancellazione CMOS Connettore USB Connettore Porta stampa nte x1 x1 x1 x2 x1
Collettore apertur a telaio( optional) x 1 Connettore alimentazione (24 pin) Connettore alimentazione (4 pi n) Tastiera PS/2 Mouse PS/2 Porta seriale I/O pannello posteriore Porta VGA Porta LAN Porta USB Connettore audio (Ver 6.x) Connettore audio (Ver 5.x) Dimensioni scheda x1 x1 x1 x1 x1 x4 x3 x6 x1 x1
Collettore apertur a telaio( optional) x 1 Connettore alimentazione (24 pin) Connettore alimentazione (4 pi n) Tastiera PS/2 Mouse PS/2 Porta seriale Porta VGA Porta LAN Porta USB Connettore audio (Ver 6.x) Connettore audio (Ver 5.x) x1 x1 x1 x1 x1 x4 x3 x6 x1 x1
207 mm (larghezza) x 244 mm (altezza) 207 mm (larghezza) x 244 mm (altezza) nTunes NVI DIA Supporto RAID 0 / 1 Windows 2000 / XP / VISTA
Caratteristiche nTunes NVI DIA speciali Sistemi operativi supportati Supporto RAID 0 / 1 Windows 2000 / XP / VISTA
Biostar si riserva il diritto di aggiungere o Biostar si riserva il diritto di aggiungere o rimuovere il supporto di qualsiasi sistema rimuovere il supporto di qualsiasi sistema operativo se nza pre avviso. operativo se nza pre avviso.
41
Motherboard Manual
SPANISH
NF61V Micr oA M2 SE Conector AM2 Procesadores AMD Athlon 64 / Ath lon 64 FX / CPU Ath lon 64 x2/ Sempron Soporta las tecnologas Hyper T ran sport y CoolnQu iet FSB Conjunto de chips NF61S Micro A M2 SE Conector AM2 Procesadores AMD Athlon 64 / Ath lon 64 FX / Ath lon 64 x2/ Sempron Soporta las tecnologas Hyper T ran sport y CoolnQu iet
Admite HyperTran sport con un an cho de banda Admite HyperTran sport con un an cho de banda de hasta1 GHz MCP61V ( GeForce 6100- 400) ITE 8716F de hasta1 GHz MCP61S ( GeForce 6100- 405) ITE 8716F
Sper E/S
Le ofrece las funcionalidades heredadas de uso Le ofrece las funcionalidades heredadas de uso ms comn Sper E/S. Interfaz de cu enta Low Pin Ranuras DIMM DDR2 x 2 ms comn Sper E/S. Interfaz de cu enta Low Pin Ranuras DIMM DDR2 x 2 Cada DIMM admite DDR de 256/512 MB y 1G B Capacidad mxima de memoria de 2GB Mdulo de memoria DDR2 de canal Doble Admite DDR2 de 400 / 533 / 667 / 800 Integrados en el conjunto de ch ips MCP61S Memoria mxima de vdeo compartida de 256MB Controlador IDE in tegrado
Cada DIMM admite DDR de 256/512 MB y 1G B Capacidad mxima de memoria de 2GB Mdulo de memoria DDR2 de canal Doble Admite DDR2 de 400 / 533 / 667 / 800 Integrados en el conjunto de ch ips MCP61V
Grficos
IDE
s maestro Ultra DMA 33 / 66 / 100 / 133 Modo bu s maestro Ultra DMA 33 / 66 / 100 / 133 Modo bu Soporte los Modos PIO 0~4 , Controlador ATA Serie In tegrado Soporte los Modos PIO 0~4 , Controlador ATA Serie In tegrado Tasas de tran sferen cia de h asta 3 Gb/s. Compatible con la versin SATA 2 .0. Realtek 8201CL PHY Negociacin de 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Salida de son ido de 5 .1 can ales (VER 6 .X) Salida de son ido de 7 .1 can ales (VER 5 .X) Soporte de son ido In tel de Alta Defin icin
SATA II
Tasas de tran sferen cia de h asta 3 Gb/s. Compatible con la versin SATA 2 .0.
Red Local
Realtek 8201CL PHY Negociacin de 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X)
Cdecs de sonido
Salida de son ido de 5 .1 can ales (VER 6 .X) Salida de son ido de 7 .1 can ales (VER 5 .X) Soporte de son ido In tel de Alta Defin icin
42
Conector de en trada S/PDIF(opcion al) X1 Conectores Cabecera de ven tilador de CPU en placa Cabecera de ven tilador de sistema Cabecera de borrado de CMOS Conector USB Conector Puerto de impresora Cabecera de chasis abierto(opcional) Conector de alimen tacin (24 patillas) Conector de alimen tacin (4 patillas) Teclado PS/2 Ratn PS/2 Panel trasero de E/S Puerto serie Puerto VG A Puerto de red local Puerto USB Conector de sonido (Ver 6 .x) Conector de sonido (Ver 5 .x) Tamao de la placa Funciones especiales 207 mm. (A) X 244 Mm. (H) NVIDIA nTunes Admite RAID 0 / 1 X1 X1 X1 X1 X1 X4 X3 X6 X1 X1 X1 X1 X2 X1 X1 X1
Conector de en trada S/PDIF(opcion al) X1 Cabecera de ven tilador de CPU Cabecera de ven tilador de sistema Cabecera de borrado de CMOS Conector USB Conector Puerto de impresora Cabecera de chasis abierto(opcional) Conector de alimen tacin (24 patillas) Conector de alimen tacin (4 patillas) Teclado PS/2 Ratn PS/2 Puerto serie Puerto VG A Puerto de red local Puerto USB Conector de sonido (Ver 6 .x) Conector de sonido (Ver 5 .x) 207 mm. (A) X 244 Mm. (H) NVIDIA nTunes Admite RAID 0 / 1 Windows 2000 / XP / VISTA X1 X1 X1 X1 X1 X4 X3 X6 X1 X1 X1 X1 X2 X1 X1 X1
Biostar se reserva el derecho de a adir o retirar Biostar se reserva el derecho de a adir o retirar el soporte de cualqu ier SO con o sin aviso previo. el soporte de cualqu ier SO con o sin aviso previo.
43
Motherboard Manual
PORT UGUESE
NF61V Micr oA M2 SE Socket AM2 Processadores AMD Ath lon 64 / Ath lon 64 FX / CPU Ath lon 64 x2/ Sempron Suporta as tecn ologias Hyper Tran sport e CoolnQu iet FSB Chipset NF61S Micro A M2 SE Socket AM2 Processadores AMD Ath lon 64 / Ath lon 64 FX / Ath lon 64 x2/ Sempron Suporta as tecn ologias Hyper Tran sport e CoolnQu iet
Suporta a tecnologia HyperT ransport com u ma Suporta a tecnologia HyperT ransport com u ma largu ra de banda at1 GHz MCP61V ( GeForce 6100- 400) ITE 8716F largu ra de banda at1 GHz MCP61S ( GeForce 6100- 405) ITE 8716F Proporciona as funcionalidades mais u tilizadas em termos da especif icao Super I/O. Interface LPC (Low Pin Count). Ranhuras DIMM DDR2 x 2 Cada mdulo DIMM suporta uma memria DDR2 de 256/512 MB & 1 GB Capacidade mxima de memria: 2 GB Mdulo de memria DDR2 de canal duplo Suporta mdulos DDR2 400 / 533 / 667 / 800 Integrada no ch ipset MCP61 S Memria de vdeo mxima partilhada: 256 MB Controlador IDE in tegrado
tilizadas Especif ica Proporciona as funcionalidades mais u icao Super I/O. o Super I/O em termos da especif Interface LPC (Low Pin Count). Ranhuras DIMM DDR2 x 2 Cada mdulo DIMM suporta uma memria Memria prin cipal DDR2 de 256/512 MB & 1 GB Capacidade mxima de memria: 2 GB Mdulo de memria DDR2 de canal duplo Suporta mdulos DDR2 400 / 533 / 667 / 800 Placa grfica Integrada no ch ipset MCP61 V Memria de vdeo mxima partilhada: 256 MB Controlador IDE in tegrado IDE
Modo Bu s master Ultra DMA 33 / 66 / 100 / 133 Modo Bu s master Ultra DMA 33 / 66 / 100 / 133 Suporta o modo PIO 0 ~4 , Controlador Serial ATA in tegrado Suporta o modo PIO 0 ~4 , Controlador Serial ATA in tegrado
SATA II
Velocidades de tran smisso de dados at 3 Gb/s. Velocidades de tran smisso de dados at 3 Gb/s. Compatibilidade com a especificao SATA verso 2 .0 . Compatibilidade com a especificao SATA verso 2 .0 . Realtek 8201CL PHY Auto n egociao de 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Sada de udio de 5.1 canais (VE R6 .X) Sada de udio de 7.1 canais (VE R5 .X) Suporta a especificao In tel High -Defin ition Audio
LAN
Realtek 8201CL PHY Auto n egociao de 10 / 100 Mb/s ALC861VD(VE R 6.X) / ALC888(VER 5 .X)
Codec de som
Sada de udio de 5.1 canais (VE R6 .X) Sada de udio de 7.1 canais (VE R5 .X) Suporta a especificao In tel High -Defin ition Audio
44
Conector de en trada S/PDIF (opcional) x1 Conectores na placa Conector da ven toinha da CPU Conector da ven toinha do sistema Conector para limpeza do CMOS Conector USB Conector da para impressora Conector para deteco da abertura do chassis(opcional) Conector de alimen tao (24 pinos) Conector de alimen tao (4 pinos) Teclado PS/2 Rato PS/2 Entradas/S Porta srie adas no painel traseiro Porta VG A Porta LAN Porta USB Tomada de udio (Ver 6.x) Tomada de udio (Ver 5.x) Tamanho da placa Caractersti cas especiais Sistemas operativos suportados 207 mm (L) X 244 mm (A) x1 x1 x1 x1 x1 x4 x3 x6 x1 x1 x1 x1 x1 x1 x2 x1
Conector de en trada S/PDIF (opcional) x1 Conector da ven toinha da CPU Conector da ven toinha do sistema Conector para limpeza do CMOS Conector USB Conector da para impressora Conector para deteco da abertura do chassis(opcional) Conector de alimen tao (24 pinos) Conector de alimen tao (4 pinos) Teclado PS/2 Rato PS/2 Porta srie Porta VG A Porta LAN Porta USB Tomada de udio (Ver 6.x) Tomada de udio (Ver 5.x) 207 mm (L) X 244 mm (A) x1 x1 x1 x1 x1 x4 x3 x6 x1 x1 x1 x1 x1 x1 x2 x1
nTunes da NVIDIA Suporta as funes RAID 0 / 1 Windows 2000 / XP / VISTA A Biostar reserva-se o direito de adicionar ou remover suporte para qu alquer sistema operativo com ou sem aviso prvio.
nTunes da NVIDIA Suporta as funes RAID 0 / 1 Windows 2000 / XP / VISTA A Biostar reserva-se o direito de adicionar ou remover suporte para qu alquer sistema operativo com ou sem aviso prvio.
45
Motherboard Manual
POLISH
NF61V Micr oA M2 SE Socket AM2 Procesor AMD Ath lon 64 / Ath lon 64 FX / Athlon 64 x2/ Sempron Procesory Obs uga Hyper T ransport oraz Cooln Qu iet FSB Chipset NF61S Micro A M2 SE Socket AM2 AMD Ath lon 64 / Ath lon 64 FX / Athlon 64 x2/ Sempron Procesory Obs uga Hyper T ransport oraz Cooln Qu iet
Obs uga HyperTran sport o szerokoci pasma do1 Obs uga HyperTran sport o szerokoci pasma do1 GHz MCP61V ( GeForce 6100- 400) Gniazda DDR2 DIMM x 2 Ka de gniazdo DIMM obs uguje modu y GHz MCP61S ( GeForce 6100- 405) Gniazda DDR2 DIMM x 2 Ka de gniazdo DIMM obs uguje modu y 256/512MB oraz 1GB DDR2 Maks. wielko pamici 2G B Modu pamici DDR2 z trybem podwjnego kanau Obs uga DDR2 400 / 533 / 667 / 800 ITE 8716F
Pami gwna
256/512MB oraz 1GB DDR2 Maks. wielko pamici 2G B Modu pamici DDR2 z trybem podwjnego kanau Obs uga DDR2 400 / 533 / 667 / 800 ITE 8716F
Super I/O
Zapewnia najbardziej powszechne funkcje Super Zapewnia najbardziej powszechne funkcje Super I/O. Interfej s Low Pin Coun t Zin tegrowan a w chipsecie MCP61 V I/O. Interfej s Low Pin Coun t Zin tegrowan a w chipsecie MCP61 S Maks. wielko wspdzielon ej pamici video wynosi 256 MB Zin tegrowany kon troler IDE
Grafika
Maks. wielko wspdzielon ej pamici video wynosi 256 MB Zin tegrowany kon troler IDE
IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bu s Master Ultra DMA 33 / 66 / 100 / 133 Tryb Bu s Master obs uga PIO tryb 0 ~4 , Zin tegrowany kon troler Serial ATA obs uga PIO tryb 0 ~4 , Zin tegrowany kon troler Serial ATA Transfer danych do 3 Gb/s. Zgodno ze specyf ikacj SATA w wersji 2 .0 . Realtek 8201CL PHY 10 / 100 Mb/s z au tomatyczn negocj acj szybkoci ALC861VD(VE R 6.X) / ALC888(VER 5 .X) 5.1 kanaowe wyjcie audio (VE R6 .X) 7.1 kanaowe wyjcie audio (VE R5 .X) Obs uga Intel High-Defin ition Audio
SATA II
Transfer danych do 3 Gb/s. Zgodno ze specyf ikacj SATA w wersji 2 .0 . Realtek 8201CL PHY
LAN
10 / 100 Mb/s z au tomatyczn negocj acj szybkoci ALC861VD(VE R 6.X) / ALC888(VER 5 .X)
Kodek
d wikowy 7.1 kanaowe wyjcie audio (VE R5 .X) Obs uga Intel High-Defin ition Audio
46
47
Motherboard Manual
RUSSIAN
. CPU ( ) FSB NF61V Micr oA M2 SE AM2 Althlon 64 X2 Hyper Tran sport CoolnQu iet HyperTran sport 1G MCP61V ( GeForce 6100- 400) DDR2 DIMM x 2 DIMM 256/512 & 1 DDR2 2 DDR2 DDR2 400 / 533 / 667 / 800 ITE 8716F Super I/O Super I/O. MCP61 V 256 IDE 100 / 133 PIO 0 ~4, ATA SATA II NF61S Micro A M2 SE AM2 Althlon 64 X2 Hyper Tran sport CoolnQu iet HyperTran sport 1G MCP61S ( GeForce 6100- 405) DDR2 DIMM x 2 DIMM 256/512 & 1 DDR2 2 DDR2 DDR2 400 / 533 / 667 / 800 ITE 8716F Super I/O. MCP61 S 256 100 / 133 PIO 0 ~4, ATA
3 /. 3 /. SATA SATA 2.0 Realtek 8201CL PHY 10 / 100 / ALC861VD(VE R 6.X) / ALC888(VER 5 .X) 5.1 (VER 6 .X) 7.1 (VER 5 .X) Intel High-Defin ition 2.0 Realtek 8201CL PHY 10 / 100 / ALC861VD(VE R 6.X) / ALC888(VER 5 .X) 5.1 (VER 6 .X) 7.1 (VER 5 .X) Intel High-Defin ition
48
x1 x1
Biostar Biostar OS OS . .
49
Motherboard Manual
ARABIC
NF61S Micro A M2 SE AM2 NF61V Micr oA M2 SE AM2
AMD Athlon 64 / Athlon 64 FX / Ath lon 64 AMD Athlon 64 / Athlon 64 FX / Ath lon 64 x2/ Sempron Hyper T Cooln ransport Quiet HyperTran 1000 sport )MCP61S ( GeForce 6100- 405 x2/ Sempron Hyper T Cooln ransport Quiet HyperTran 1000 sport )MCP61V ( GeForce 6100- 400
DDR2 DIMM
DDR2 DIMM
DIMM 256/512 DDR2 1 2 DDR2 DDR2800 / 667 / 533 /400 ITE 8716F Super I/O . Low Pin Count Interface 256 MCP61 S IDE Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0~4 Serial ATA 3/. 2.0 SATA . Realtek 8201CL PHY 100/10 / / ALC861VD(VE R 6.X) / ALC888(VER 5 ).X 5.1 (VER 6 ).X 7.1 (VER 5 ).X Intel
DIMM 256/512 DDR2 1 2 DDR2 DDR2800 / 667 / 533 /400 ITE 8716F Super I/O . Low Pin Count Interface 256 MCP61 V IDE Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0~4 Serial ATA 3/. 2.0 SATA . Realtek 8201CL PHY 100/10 / / ALC861VD(VE R 6.X) / ALC888(VER 5 ).X 5.1 (VER 6 ).X 7.1 (VER 5 ).X Intel SATA II IDE Super I/O
50
2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 4 3 6
PCI )(x8 PCI Express x16 PCI Express x 1 IDE SATA CD-IN S/PDIF ) S/PDIF( CMOS USB ) ( )24( ) 4( PS/2 PS/2 VGA USB (V )er 6.x (V )er 5.x
NVIDIA nTunes RAID 0 / 1
2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 4 3 6
PCI )(x1 PCI Express x16 PCI Express x 1 IDE SATA CD-IN S/PDIF ) S/PDIF( CMOS USB ) ( )24( ) 4( PS/2 PS/2 / VGA USB (V )er 6.x (V )er 5.x
NVIDIA nTunes RAID 0 / 1
207 ) ( 244 X ) (
Windows 2000 / XP / VISTA Biostar
207 ) ( 244 X ) (
Windows 2000 / XP / VISTA Biostar
51
Motherboard Manual
JAPANESE
NF61V Micr oA M2 SE Socket AM2 AMD Ath lon 64 / Ath lon 64 FX / Athlon 64 x2/ CPU Sempron NF61S Micro A M2 SE Socket AM2 AMD Ath lon 64 / Ath lon 64 FX / Athlon 64 x2/ Sempron
FSB
1 GHz 1 GHz MCP61S ( GeForce 6100- 405) DDR2 DIMM x 2 DIMM 256/512 MB & 1GB DDR2 2GB DDR2 DDR2 400 / 533 / 667 / 800 ITE 8716F
MCP61V ( GeForce 6100- 400) DDR2 DIMM x 2 DIMM 256/512 MB & 1GB DDR2 2GB DDR2 DDR2 400 / 533 / 667 / 800 ITE 8716F Super I/O
Super I/O Super I/O MCP61 S 256MB IDE Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0 ~4 ATA 3 Gb/ SATA2 .0 Realtek 8201CL PHY 10 / 100 Mb/ ALC861VD(VE R 6.X) / ALC888(VER 5 .X) 5.1 (VER 6 .X) 7.1 (VER 5 .X) Intel
MCP61 V 256MB IDE IDE Ultra DMA 33 / 66 / 100 / 133 PIO Mode 0 ~4 ATA SATA II 3 Gb/ SATA2 .0 LAN Realtek 8201CL PHY 10 / 100 Mb/ ALC861VD(VE R 6.X) / ALC888(VER 5 .X) Codec 5.1 (VER 6 .X) 7.1 (VER 5 .X) Intel
52
OS BiostarOS BiostarOS
2006/10/30
53
Table of Contents
BIOS Setup .................................................................................................2 1 Main Menu...............................................................................................4 2 Standard CMOS Features......................................................................7 3 Advanced BIOS Features .......................................................................9 4 Advanced Chipset Features..................................................................15 5 Integrated Peripherals..........................................................................17 6 Power Management Setup....................................................................23 7 PnP/PCI Configurations.......................................................................27 8 PC Health Status ...................................................................................29 9 Performance Booster Zone...................................................................31
BIOS Setup
Introduction
The purpose of this manual is to describe the settings in the Award BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. The power of CMOS RAM is supplied by a battery so that it retains the Setup inform ation when the power is turned off. Basic Input-Output System (BIOS) determines what a computer can do without accessing programs from a disk. This system controls most of the input and output devices such as keyboard, mouse, serial ports and disk drives. BIOS activates at the first stage of the booting process, loading and executing the operating system. Some additional features, such as virus and password protection or chipset fine-tuning options are also included in BIOS. The rest of this manual will to guide you through the options and settings in BIOS Setup.
APM Support
This AWARD BIOS supports Version 1.1&1.2 of the Advanced Power Management (APM) speci fi cation. Power management features are implemented via the System Management Interrupt (SMI). Sleep and Suspend power management modes are supported. Power to the hard disk drives and video monitors can also be managed by this AWARD BIOS.
ACPI Support
Award ACPI BIOS support Version 1.0 of Advanced Configuration and Power interface speci fi cation (ACPI). It provides ASL code for power management and device configuration capabilities as defined in the ACPI specifi cation, developed by Microsoft, Intel and Toshiba.
DRAM Support
DDR SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This AWARD BIOS supports the AMD CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to select, use the <PgUp> and <PgDn> keys to change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program by using the keyboard. Keystroke
Up arrow Down arrow Left arrow Right arrow Move Enter PgUp key PgDn key + Key - Key Esc key F1 key F5 key F7 key F10 key
Function
Move to previous item Move to next item Move to the item on the left (menu bar) Move to the item on the right (menu bar) Move to the item you desired Increas e the numeric val ue or make c hanges Decrease the numeric value or make changes Increas e the numeric val ue or make c hanges Decrease the numeric value or make changes Main Menu Quit and not s ave c hanges into CMOS Status Page Setup Menu and Option Page Setup Menu Exit Current page and r eturn to M ain Menu General help on Setup navigation keys Load pr evious values from CMOS Load the opti mized defaults Save all the CMOS c hanges and exit
1 Main Menu
Once you enter Award BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions. Use the arrow keys to select among the items and press <Enter> to accept and enter the sub-menu.
!! WARNING !!
For better system performance, the BIOS firmware is being continuously updated. The BIOS information described in this manual (Figure 1, 2, 3, 4, 5, 6, 7, 8, 9) is for your reference only. The actual BIOS information and settings on board may be slightly different from this manual.