You are on page 1of 1

Measurement of voltage ratio Verification of vector group and polarity Measurement of magnetizing current from LV side Measurement of magnetic

balance Measurement of no load loss & current at 90%,100%,110% excitation Separate source voltage withstand test Switching impulse voltage withstand test Full wave lightning impulse voltage withstand test Induced over voltage test with PD measurement (ACLD) ACSD test Measurement of winding resistance Measurement of load loss & impedance Cooler bank assembly DGA before temperature rise test Temperature rise test (ONAN/ ONAF/OFAF) DGA after temperature rise test Measurement of power taken by cooling equipment Zero sequence impedance Repeat no load loss measurement at 100% excitation Measurement of noise level Measurement of insulation resistance Measurement of capacitance & tan delta of winding Isolation test at 2 Kv AC FRA test Oil pressure test

You might also like