You are on page 1of 565

P R O D U C T C A T A L O G

J A N U A R Y 2 0 1 2

POWERWAVE

Page
Base Station Products and Solutions
Power Amplifier Solutions
MCPA Modules 6
Single MCPA Outdoor Booster Systems 14
Dual MCPA Outdoor Booster Systems 20
Triple MCPA Outdoor Booster Systems 24
TMA Products
Tower Mounted Amplifiers 31
Power Distribution Unit 68
Current Injectors 72
Filters
Diplexer/Crossband Combiners 79
Duplexers 85
Same Band Combiners T1 86
Triplexer/Crossband Combiners 90
Interference Filters 91
RMDU and Enclosure Solutions
MicroFlex Outdoor Enclosures 95
RapidFlex Outdoor Enclosures 98
SubTerra Controlled Environment Vault 100
VersaFlex Shelter Solutions 102
Coverage Products and Solutions
Repeater Products
Channel Selective Standard Repeaters 108
Band Selective Compact Repeaters 138
Band Selective Standard Repeaters 170
Advanced Train Repeaters 185
Digital Repeaters 190
In-Building and Outdoor DAS Products
Repeater Products
Bi-Directional Amplifiers 203
Fiber Optic DAS Master Unit 206
LinkNet Convergence Platform 208
Tap-In Signal Distribution Taps 216
Nexus FT Public Safety 218
DAS Products
Wide Band Radio Heads 220
Nexus FT Single and Dual Band 223
Nexus FT Rack Mounts 259
Repeater Remote Management Products
Base Station Management Interface 265
IP/SNMP/GPS Repeater Remote Management Interface 267
Antenna Products
Broadband Antennas
Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz 274
Low Broadband Cross Polarized Antennas, 806-960 MHz 305
Low Broadband Cross Polarized Antennas, 698-894 MHz 343
Dual Broadband Antennas
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz 351
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz 361
Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz 368

Table of Contents
Table of Contents
1

POWERWAVE

Page
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz 375
Single and Dual Band Antennas
Single Band Antennas
Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz 384
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz 386
Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz 406
Urban Vertical Polarized Antennas, 824-896/870-960 MHz 414
Dual Band Antennas
Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz 438
iRET
Low Broadband Cross Polarized iRET Antennas, 698-894MHz 452
Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz 456
Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 463
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 483
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 489
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz 493
Dual High Broadband Cross Polarized iRET Antennas, 2300-2700 MHz 496
iDiplexer Antennas
Multi Broadband Cross Polarized Antennas 502
Remote Electrical Tilt (RET)
Single Band RET 508
Dual Band RET 517
Triple Band RET 520
iRET Antenna Controller Module 8510 523
Master Control Unit 526
Current Injector Layer One Converter 533
RET System Cables 538
Indoor Antennas
Dual Band Indoor Antennas
Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz 543
Multiband Indoor Antennas
Vertical Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz 545
Clean Site Solutions 549
Mounting Solutions 551
Antenna FAQ 558
Network Management 559
Part Number Index 561
Table of Contents
Table of Contents
2 2
Base Station Products
Power wave
Base Station Products
A unique combination of capabilities sets Powerwave apart
from other providers when it comes to rapidly delivering
cost-effective base station solutions to operators & OEMs.
From straightforward crossband and same band combiners
to active multi-function assemblies such as tunable
combiners, active same band combiners and integrated
amplifer assemblies, Powerwave has you covered.
Comprehensive RF/Digital Competencies
Our engineering staff has expertise across all facets
of RF and digital signal processing. Using all of these
technological competencies, we are able to create highly
integrated performance and cost-effective base station
solutions. Higher integration means fewer parts, optimum
manufacturing effciency and better value.
End-to-End System Provider
Because Powerwave is a proven provider for all categories
of wireless infrastructure solutions - from antenna products
to base station products to coverage products - you can rely
on us as a value-added single-source to consolidate and
streamline your supply chain.
Power Amplifer Solutions
TMA Products
Filters

POWERWAVE

Power Amplifier Solutions Page
MCPA Modules 6
Single MCPA Outdoor Booster Systems 14
Dual MCPA Outdoor Booster Systems 20
Triple MCPA Outdoor Booster Systems 24

TMA Products
Tower Mounted Amplifiers 31
Power Distribution Units 68
Current Injectors 72

Filters
Diplexer/Crossband Combiners 79
Duplexers 85
Same Band Combiners T1 86
Triplexer/Crossband Combiners 90
Interference Filters 91
Base Station Products
Base Station Products
4
Powerwave offers one of the industrys largest and most
diverse line of power amplifer systems for cellular, EGSM,
DCS, PCS, AWS and UMTS wireless networks, with more
than 350,000 MCPAs and SCPAs deployed worldwide.
One key reason for this success is that we are able to
rapidly roll out new solutions by leveraging the modular
architecture of existing systems. Building upon feld-proven
products and technologies, our RF engineers are able to
shorten design time and deliver systems with industry-
leading effciency, packaging density and reliability to
help service providers reduce both operating and capital
expenses within their network while increasing revenues.
Power Amplier Solutions
Power wave
MCPA Modules
Single MCPA Outdoor
Booster Systems
Dual MCPA Outdoor
Booster Systems
Triple MCPA Outdoor
Booster Systems

Title Range (MHz) Air Interface Part Number Page
180W Multi-Carrier
Power Amplifier
850
GSM/EDGE/CDMA2000/
WCDMA
G3l-850-180 7
160W Multi-Carrier
Power Amplifier
850
GSM/EDGE/CDMA2000/
WCDMA
G3L-850-160 9
135W Multi-Carrier
Power Amplifier
900
GSM/EDGE/CDMA2000/
WCDMA
G3L-929-135 10
120W Multi-Carrier
Power Amplifier
1800
GSM/EDGE/CDMA2000/
WCDMA
G3L-1829-120 11
170W Multi-Carrier
Power Amplifier
1900
GSM/EDGE/CDMA2000/
WCDMA
G3L-1929-160 12
140W Multi-carrier
Power Amplifier
2100
GSM/EDGE/CDMA2000/
WCDMA
G3L-2129-140 13
POWERWAVE

Power Amplifier Solutions

MCPA Modules
Base Station Products
MCPA Modules
6

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Multi-Carrier Power Amplifiers
G3L-850-180


Introduction:
The G3L-850-180 is a high performance Multi-Carrier Power Amplifier
(MCPA) intended for Cellular applications. This PA utilizes
Powerwaves feed-forward linearization technique to provide
maximum operating BW and compatibility with 2G, 3G and 4G air
interface standards. Latest generation devices and biasing schemes
provide industry leading efficiency, RF output power and spectrum
performance allowing significant savings in OPEX and CAPEX.
Features:
G Automatic Power Control (APC) @ 210W
G Phase matched for parallel combining
G Internal monitoring and alarming for VSWR, linearization, voltage,
overpower
G Backward compatible with legacy MCPA systems
G Common form-factor with PCS and AWS models
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) 869 ~ 894
Bandwidth (MHz) 25
Instantaneous Bandwidth (MHz) 25
Air Interface GSM, EDGE, CDMA2000, WCDMA, LTE
Efficiency 23%
RF Output Power 180W
Intermodulation Distortion FCC & Air Interface Compliant
Harmonics -13dBm/1MHz
Nominal RF Gain (dB) 63dB
Gain Flatness +/-0.5dB
Gain Variation with Temperature +/-0.5dB
Input Return Loss 14dB
Output Return Loss 16dB
DC Input Voltage Range (DC) +22V ~ + 30V
DC Input Current 29A @ +27V, 180W RF Ouput
Alarms and Protections VSWR, Temp, Overpower, PSU, Linearization
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Oct 5 2011 5:41PM
7

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Multi-Carrier Power Amplifiers
G3L-850-180








MECHANICAL SPECIFICATIONS
Dimension HxWxD, ft. (mm) 12 x 4 x 16 (354.6 x 95.6 x 450)
Weight, lbs (kg) 24.3 (11.0)
Connectors DC Terminal Post PDM (D-Sub 17/21 Blind Mate)
Connectors RF Input PKZ (D-Sub 17/21 Blind Mate)
Connectors RF Output PKZ (D-Sub 17/21 Blind Mate)
Connectors Alarm Output D-Sub 17/21 Blind Mate
Serial Interface (GUI) RJ-11 Jack
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20oC ~ +50oC
Storage Temperature Range -40oC ~ +70oC
Operating Humidity 5% ~ 80% RH
Storage Humidity 5% ~ 95% RH
Example Performance @ 180W RF Output
Single Carrier HSPA+

PCDE Compliant
Peak EVM Compliant
Multi-Carrier HSPA+

PCDE Compliant
Peak EVM Compliant
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Oct 5 2011 5:41PM
8

POWERWAVE Multi-Carrier Power Amplifiers





*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
G3L-850-160 160W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS*
Band (MHz) 850
Frequency Range (MHz) 869-894
Instantaneous Bandwidth 25
Air Interface GSM/EDGE/CDMA2000/WCDMA
Efficiency 18%
RF Output Power 160W (Typical)
Intermodulation Distortion -65 dBc
Harmonics Better than -13 dBm/ 1MHz
Nominal RF Gain (dB) 63 dB 0.5 dB
Gain Flatness 0.5 dB
Gain Variation with Temperature +/-0.5 dB
Input Return Loss 16 dB (Max)
Output Return Loss 16 dB (Max)
DC Input Voltage Range 26 to 28 Vdc (+21 to 30 Vdc Operational)
DC Input Current Typical: 30.5A (GSM), 29 (CDMA)
Alarms and Protections Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft) 355 x 99 x 450 (12x4x16)
Weight(lbs) 24.3
Connectors DC Terminal Post N/A
Connectors RF Input Sub-miniature Combo D connector for RF & Digital interfaces
Connectors RF Output N/A
Connectors Alarm Output N/A
ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range -33C to 50C
Storage Temperature Range -40to 70C
Operating Humidity 0% to 80% (non condensing)
Storage Humidity 0% to 95% (non condensing)

Updated: Dec 5 2010 4:38PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 9

POWERWAVE Multi-Carrier Power Amplifiers





*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
G3L-929-135 135W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS*
Band (MHz) 900
Frequency Range (MHz) 925-960 MHz
Instantaneous Bandwidth 25 MHz
Air Interface GSM/EDGE/CDMA2000/WCDMA
Efficiency 19%
RF Output Power 135W (Typical)
Intermodulation Distortion -65 dBc (Typical)
Harmonics Better than -13 dBm/1 MHz
Nominal RF Gain (dB) 63 dB 0.5 dB
Gain Flatness 0.5 dB
Gain Variation with Temperature 0.5 dB
Input Return Loss 14 dB (Max)
Output Return Loss 16 dB (Max)
DC Input Voltage Range 26 to 28 Vdc (21 to 30 Vdc Operational)
DC Input Current 26A (nominal at rated power)
Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft) 355 x 99 x 450 (12x4x16)
Weight(lbs) 20
Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact
Connectors RF Input 21W4 Combo-D w/PkZ contact
Connectors RF Output 21W4 Combo-D w/PkZ contact
Connectors Alarm Output 21W4 combo-D
ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range -33 C to 50 C
Storage Temperature Range -40 C to 70 C
Operating Humidity 5% to 95% non-condensing
Storage Humidity 5% ro 95% non-condensing

Updated: Dec 6 2010 5:44PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 10

POWERWAVE Multi-Carrier Power Amplifiers





*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
G3L-1829-120 120W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS*
Band (MHz) 1800
Frequency Range (MHz) 1805-1880
Instantaneous Bandwidth 35
Air Interface GSM/EDGE/CDMA2000/WCDMA
Efficiency 13.4% (GSM)
RF Output Power Typical: 120W
Intermodulation Distortion -65 dBc (Typical)
Harmonics Better than -13 dBm/ 1MHz
Nominal RF Gain (dB) 63 dB +/- 0.5
Gain Flatness +/-0.3 dB
Gain Variation with Temperature +/-0.5 dB
Input Return Loss 17 dB (Max)
Output Return Loss 18 dB (Max)
DC Input Voltage Range 26 to 30 /Vdc (22 to 30 Vdc Operational)
DC Input Current Typical: 33A (GSM), 31A (CDMA)
Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft) 355 x 99 x 450 (12x4x16)
Weight(lbs) 23
Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact
Connectors RF Input 21W4 Combo-D w/PkZ contact
Connectors RF Output 21W4 Combo-D w/PkZ contact
Connectors Alarm Output 21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range -33 C to 50 C
Storage Temperature Range -40 to 70 C
Operating Humidity 5% to 95% (non condensing)
Storage Humidity 5% to 95% (non condensing)

Updated: Dec 5 2010 4:39PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 11

POWERWAVE Multi-Carrier Power Amplifiers





*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
G3L-1929-160 170W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS*
Band (MHz) PCS
Frequency Range (MHz) 1930-1995
Instantaneous Bandwidth Up to 65
Air Interface GSM/EDGE/CDMA2000/WCDMA
Efficiency 18.5%
RF Output Power 170 Watts (Typical)
Intermodulation Distortion -65 dBc
Harmonics Better than -13 dBm/ 1MHz
Nominal RF Gain (dB) 63 dB 0.5 dB
Gain Flatness 0.5 dB
Gain Variation with Temperature +/-0.5 dB
Input Return Loss 16 dB (Max)
Output Return Loss 16 dB (Max)
DC Input Voltage Range 26 to 28 Vdc (+21 to 30 Vdc Operational)
DC Input Current 34A@170W, 33A@160W
Alarms and Protections Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft) 355 x 99 x 450 (12x4x16)
Weight(lbs) 26.4
Connectors DC Terminal Post N/A
Connectors RF Input Sub-miniature Combo D connector for RF & Digital interfaces
Connectors RF Output N/A
Connectors Alarm Output N/A
ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range -33C to 50C
Storage Temperature Range -40to 70C
Operating Humidity 0% to 80% (non condensing)
Storage Humidity 0% to 95% (non condensing)

Updated: Dec 5 2010 4:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 12

POWERWAVE Multi-Carrier Power Amplifiers





*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
G3L-2129-140 140W Multi-carrier Power Amplifier
ELECTRICAL SPECIFICATIONS*
Band (MHz) 2100
Frequency Range (MHz) 2110-2170
Instantaneous Bandwidth 60 MHz
Air Interface CDMA2000/WCDMA/LTE
Efficiency > 15% (45 MHz IBW), >14% (60 MHz IBW)
RF Output Power 140W
Intermodulation Distortion Spurious Emissions - 3GPP TS25.141 Air interface compliant.
Harmonics -13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.)
Nominal RF Gain (dB) 63 dB
Gain Flatness +/-0.5 dB
Gain Variation with Temperature +/-0.5 dB
Input Return Loss 14
Output Return Loss 16
DC Input Voltage Range +26 to +28 Vdc Nominal (+21 to +30 Operational)
DC Input Current 34.5A (Nominal, at 27V, 140W output)
Alarms and Protections Input over drive, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft) 355 x 99 x 500 (incl handles) (13.96 H X 3.9 W X 19.7 D)
Weight(lbs) 28.5
Connectors DC Terminal Post 21W4 Combo-D w/size 8 contact
Connectors RF Input 21W4 Combo-D w/PkZ contact
Connectors RF Output 21W4 Combo-D w/PkZ contact
Connectors Alarm Output 21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range -20C to +50C
Storage Temperature Range -40to +85C
Operating Humidity 5% to 90% (non condensing)
Storage Humidity 5% to 90% (non condensing)

Updated: Dec 5 2010 4:44PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 13

Title Range (MHz) Air Interface Part Number Page
OS-1 Outdoor System 800
GSM/EDGE/CDMA2000/
WCDMA
OS-0851-P0-XXX 15
OS-1 Outdoor System 900
GSM/EDGE/CDMA2000/
WCDMA
OS-0951-P0-XXX 16
OS-1 Outdoor System 1800
GSM/EDGE/CDMA2000/
WCDMA
OS-1851-H0-XXX 17
OS-1 Outdoor System 1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1951-E0-XXX 18
OS-1 Outdoor System 2100
GSM/EDGE/CDMA2000/
WCDMA
OS-2151-E0-XXX 19
POWERWAVE

Power Amplifier Solutions

Single MCPA Outdoor Booster Systems
Base Station Products
Single MCPA Outdoor Booster Systems
14

POWERWAVE Outdoor Booster Systems





* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-0851-P0-XXX OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link 869-894
Frequency (MHz) Up Link 824-849
System Output Power 120**
IMD Specification -65* dBc
Instantaneous Bandwidth 25
Tx Gain Range (dB) 0 to +20
Rx Path Insertion Loss 2.5* (-000 version)
Supply Voltage 180-264 VAC or +27VDC
Noise Figure (dB) 2.5 @ max gain, 3.0 @ min gain* (-003 version)
Rx Gain Range 0 to +13.0 variable (-003 version)
Input Intercept Point IIP3 (dBm) +12 min (-003 Version)
Tx Rejection In Rx Band (dB) 100 min
VSWR Alarm Threshold (dB) 7.0 (+/- 2 dB) (-003 version)
Return Loss, All Ports (dB) 15 min
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 228 X 660 X 660 (9x 22 x 22)
Weight(lbs) 102
RF Connectors 7/16 DIN female X 6
Number of MCPAs per Sector 1
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP54
Lightning Protection 20kA EIC 61000-4-5, 8/20us waveform
ORDERING INFORMATION
Model Number Description Quantity
930-00018-009 (optional) 3 KW Rectifier 1

MCPA Modules:
G3L-850-160 160W MCPA Module 1


Choose one of the following
Enclosures:

OS-0851-P0-000 Enclosure -TMA model 1
OS-0851-P0-003
Enclosure - LNA model with VSWR
monitor
1






Updated: Aug 26 2010 12:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 15

POWERWAVE Outdoor Booster Systems





* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-0951-P0-XXX OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/WCDMA
Frequency (MHz) Down Link 925-960
Frequency (MHz) Up Link 880-915
System Output Power 105 Watts**
IMD Specification Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant
Instantaneous Bandwidth 35
Tx Gain Range (dB) 0 to +20.0 variable
Rx Path Insertion Loss 2 dB* (-100 model)
Supply Voltage 94-264 VAC (Single Phase) or +27VDC
Noise Figure (dB) 2.5* @ max. gain, 3.5* @ min. gain (-103 version)
Rx Gain Range 0 to +14.0 variable (-100 model)
Input Intercept Point IIP3 (dBm) > 0 dBm
Tx Rejection In Rx Band (dB) 100 min.
VSWR Alarm Threshold (dB) 0-10 dB output RL
Return Loss, All Ports (dB) 14 min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 620 X 284 X 716 (24.4x 11.18 x 28.18)
Weight(lbs) 50 Kg (110 lbs)
RF Connectors 7/16 DIN Female X 4
Number of MCPAs per Sector 1
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -30 to +50
Ingress Protection Class IP54
Lightning Protection 40kA per line, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
Choose one enclosure:
OS-0951-P0-104
1 sector, with LNA, includes rectifier and
modem
1
OS-0951-P0-103 1 sector, with LNA, includes rectifier 1

Amplifier Module:
G3L-929-135 135W MCPA Module 1









Updated: Feb 11 2011 10:24AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 16

POWERWAVE Outdoor Booster Systems





* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-1851-H0-XXX OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link 1805-1880
Frequency (MHz) Up Link 1710-1785
System Output Power 90** Watts
IMD Specification -65* dBc
Instantaneous Bandwidth 45
Tx Gain Range (dB) 0 to +14
Rx Path Insertion Loss 2dB* (-000 version)
Supply Voltage 94-264 VAC (Single Phase, 47-63Hz) or +27VDC
Noise Figure (dB) 2.3* @ max. Gain, 1.89* @ min. Gain
Rx Gain Range 0 to +13.0 variable (-003 version)
Input Intercept Point IIP3 (dBm) +12 min.
Tx Rejection In Rx Band (dB) 100 min.
VSWR Alarm Threshold (dB)
Return Loss, All Ports (dB) 15 min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 610 X 284 X 716 (24x 11 x 28)
Weight(lbs) 102
RF Connectors 7/16 DIN Female X 6
Number of MCPAs per Sector 1
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP54
Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
G3L-1829-120 120W MCPA module 1
1

Choose one of:
OS-1851-H0-000 Enclosure - TMA model - DC transparency 1
OS-1851-H0-003
Enclosure - LNA model - includes VSWR
monitor, lightning arrestors
1









Updated: Jun 10 2010 2:32PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 17

POWERWAVE Outdoor Booster Systems





* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-1951-E0-XXX OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM, EDGE,CDMA,WCDMA
Frequency (MHz) Down Link 1930-1990
Frequency (MHz) Up Link 1850-1910
System Output Power 125** Watts
IMD Specification -65 dBc
Instantaneous Bandwidth 65
Tx Gain Range (dB) 0 to +20 variable
Rx Path Insertion Loss 2 dB (-100 series)
Supply Voltage 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC
Noise Figure (dB) 2.5 dB max (all models except -100)
Rx Gain Range 0 to +14 dB (all models except -100)
Input Intercept Point IIP3 (dBm) > 0 dBm
Tx Rejection In Rx Band (dB) 100 dB min
VSWR Alarm Threshold (dB) 0-10 dB output RL
Return Loss, All Ports (dB) 14 dB min
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 620 X 284 X 716 (24.4x 11.18 x 28.18)
Weight(lbs) 110 (50 Kg)
RF Connectors 7/16 DIN Female X 6
Number of MCPAs per Sector 1
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -30 C to +50 C
Ingress Protection Class IP54
Lightning Protection 40 KA per line, 8/20 us WF
ORDERING INFORMATION
Model Number Description Quantity
Enclosures (Select one):

OS-1951-E0-102 1 sector, with LNA, includes rectifier 1

MCPA Module
G3L-1929-160 160W 1900 MHz MCPA 1

Alternatively, select a Kit:
INST-OS-1951-103 Kit includes:
G3L-1929-160 amplifier module 1
OS-1951-E0-102 enclosure 1




Updated: Jul 20 2010 3:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 18

POWERWAVE Outdoor Booster Systems





OS-2151-E0-XXX OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM,EDGE,CDMA,WCDMA
Frequency (MHz) Down Link 2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series)
Frequency (MHz) Up Link 1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series)
System Output Power 100W**
IMD Specification Spurious Emissions - 3GPP TS25.141 Air interface compliant.
Instantaneous Bandwidth 45 (AWS, -4XX series) 60 (UMTS,-1XX series)
Tx Gain Range (dB) 0 to +20 variable
Rx Path Insertion Loss 2 dB (-100,-400 models)
Supply Voltage 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC
Noise Figure (dB) 2.5 dB max (-101,-401 models)
Rx Gain Range 0 to +14 dB adjustable (-101,-401 models)
Input Intercept Point IIP3 (dBm) >0 dBm
Tx Rejection In Rx Band (dB) 100dB min.
VSWR Alarm Threshold (dB) 0-10 dB output RL (selectable)
Return Loss, All Ports (dB) 14 dB min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 620 X 284 X 716 (24.4x 11.18 x 28.18)
Weight(lbs) 110 (50 Kg)
RF Connectors 7/16 DIN Female X 4
Number of MCPAs per Sector 1
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -30 C to +50 C
Ingress Protection Class IP54
Lightning Protection 40kA per line, 8/20 us WF
ORDERING INFORMATION
Model Number Description Quantity
Enclosures (select one)

OS-2151-E0-101
LNA model - UMTS (Band Class 1)
w/rectifier
1
OS-2151-E0-104
LNA model - UMTS (Band Class 1) w/rectifier
and modem
1
OS-2151-E0-401 LNA model - AWS (Band Class 4) w/rectifier 1
OS-2151-E0-404
LNA model - AWS (Band Class 4) w/rectifier
and modem
1
MCPA Module:
G3L-2129-140 140W MCPA module 1







Updated: Jul 20 2010 3:26PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 19

Title Range (MHz) Air Interface Part Number Page
OS-2 Outdoor System 900
GSM/EDGE/CDMA2000/
WCDMA
OS-0921-V0-XXX 21
OS-2 Outdoor System 1800
GSM/EDGE/CDMA2000/
WCDMA
OS-1821-H0-XXX 22
OS-2 Outdoor System 1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1921-H0-XXX 23
POWERWAVE

Power Amplifier Solutions

Dual MCPA Outdoor Booster Systems
Base Station Products
Dual MCPA Outdoor Booster Systems
20

POWERWAVE Outdoor Booster Systems





OS-0921-V0-XXX OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface EGSM/EDGE
Frequency (MHz) Down Link 925-960
Frequency (MHz) Up Link 880-915
System Output Power 180** Watts
IMD Specification -65* dBc
Instantaneous Bandwidth 25
Tx Gain Range (dB) 1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5
Rx Path Insertion Loss 2dB*(-000 variant), 0.5dB*dB (bypass mode)
Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB) 2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants)
Rx Gain Range 0 to +11.0 variable (-001 and -003 variants)
Input Intercept Point IIP3 (dBm) +12 min.
Tx Rejection In Rx Band (dB) 90 min.
VSWR Alarm Threshold (dB) 9.5 (+/-2dB) (-003 variant)
Return Loss, All Ports (dB) 14 min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 407 x 865 x 840 (14x 210x 29)
Weight(lbs) 151-183
RF Connectors 7/16 DIN Female X 4
Number of MCPAs per Sector 1 or 2
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 to +50
Ingress Protection Class IP54
Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
G3L-929-135 135W MCPA module 1-2
1001308 Rectifier 2-3

Choose one of the following
Enclosures:

OS-0921-V0-010
Enclosure - TMA model - 12V supply
to TMA
1
OS-0921-V0-011 Enclosure - LNA model 1
OS-0921-V0-013
Enclosure - LNA model with VSWR
monitor
1








Updated: Jun 10 2010 2:33PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 21

POWERWAVE Outdoor Booster Systems





* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-1821-H0-XXX OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE
Frequency (MHz) Down Link 1805-1880
Frequency (MHz) Up Link 1710-1785
System Output Power 160** Watts
IMD Specification -65* dBc
Instantaneous Bandwidth 35
Tx Gain Range (dB) 1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15
Rx Path Insertion Loss 2.5dB*, 0.5dB* (bypass)
Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB) 2.5* @ max. Gain, 3.5* @ min. Gain (-001 version)
Rx Gain Range 0 to +12.0 variable (-001 version)
Input Intercept Point IIP3 (dBm) +12dBm min.
Tx Rejection In Rx Band (dB) 100 min.
VSWR Alarm Threshold (dB) N/A
Return Loss, All Ports (dB) 14 min
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 407 x 865 x 840 (14x 210x 29)
Weight(lbs) 151-183
RF Connectors 7/16 DIN Female X 4
Number of MCPAs per Sector 2
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP54
Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
G3L-1829-120 120W MCPA Module 1-2
1001308 AC Rectifier 2-3

Choose one of the following
Enclosures:

OS-1821-H0-004
TMA Model - 12VDC supply to
TMA
1
OS-1821-H0-005 LNA Model 1









Updated: Jun 10 2010 2:32PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 22

POWERWAVE Outdoor Booster Systems





* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-1921-H0-XXX OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link 1930-1990
Frequency (MHz) Up Link 1850-1910
System Output Power 160** Watts
IMD Specification -65* dBc
Instantaneous Bandwidth 45/60
Tx Gain Range (dB) 1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15
Rx Path Insertion Loss 2.5*
Supply Voltage 180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB) N/A
Rx Gain Range N/A
Input Intercept Point IIP3 (dBm) N/A
Tx Rejection In Rx Band (dB) 100 dB min
VSWR Alarm Threshold (dB) N/A
Return Loss, All Ports (dB) 14dB min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 407 x 863 x 838 (16x 34x 33)
Weight(lbs) 151-183
RF Connectors 7/16 DIN Female X 8
Number of MCPAs per Sector 2
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP54
Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
930-00018-009 3 KW rectifier 1-2
OS-1921-H0-000
Enclosure - TMA model - DC transparency or
TMA bias Function
1
(configurable)
Compatible with MCPA
Module:

G3L-1929-120 120W MCPA module 1-2










Updated: Jun 10 2010 2:33PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 23

Title Range (MHz) Air Interface Part Number Page
OS-3 3 Sector Outdoor
System
900
GSM/EDGE/CDMA2000/
WCDMA
OS-0933-E0-XXX 25
OS-3 3 Sector Outdoor
System
1800
GSM/EDGE/CDMA2000/
WCDMA
OS-1833-E0-XXX 26
OS-3 3 Sector Outdoor
System
1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1933-E0-XXX 27
OS-3 Outdoor System 1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1991-H0-XXX 28
OS-3 3 Sector Outdoor
System
2100
GSM/EDGE/CDMA2000/
WCDMA
OS-2133-E0-XXX 29
POWERWAVE

Power Amplifier Solutions

Triple MCPA Outdoor Booster Systems
Base Station Products
Triple MCPA Outdoor Booster Systems
24

POWERWAVE Outdoor Booster Systems





OS-0933-E0-XXX OS-3 3 Sector Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link 925-960
Frequency (MHz) Up Link 880-915
System Output Power 110 W*
IMD Specification -63 dBc*
Instantaneous Bandwidth 35 (with G3L-929-135 module)
Tx Gain Range (dB) 0-17 Variable
Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)
Supply Voltage 180-264 VAC, -48VDC (-103 model)
Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)
Rx Gain Range 0-12 dB
Input Intercept Point IIP3 (dBm) 0.0
Tx Rejection In Rx Band (dB) 100
VSWR Alarm Threshold (dB) Adjustable
Return Loss, All Ports (dB) 14
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 16 W x 40 H x 38 D
Weight(lbs) 385 (175 kg)
RF Connectors 7/16 DIN-F, N-F
Number of MCPAs per Sector 1
Number of Sectors 3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP55
Lightning Protection 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION
Model Number Description Quantity
OS-0933-E0-003
OS-3, 900 MHz, Trident 3 Sector, 3I/3O
Includes:
1
G3L-929-135 modules 3
RF Conditioning Units (RFCU) 3
220VAC Rectifiers 4
OS-0933-E0-103 -48VDC version of OS-0933-E0-003

Includes four -48VDC rectifiers instead of


220VAC rectifiers

OS-0933-E0-001
OS-3, 900 MHz, Trident 1 Sector, 3I/3O
Includes:
1
G3L-929-135 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifiers 2
INST-0933-E0-001 1 Sector Upgrade Kit
Includes:
G3L-929-135 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifier 1

Updated: Sep 6 2011 10:20AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 25

POWERWAVE Outdoor Booster Systems





OS-1833-E0-XXX OS-3 3 Sector Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link 1805-1880
Frequency (MHz) Up Link 1710-1785
System Output Power 100 W*
IMD Specification -63 dBc*
Instantaneous Bandwidth 75 (with G3L-1829-120 module)
Tx Gain Range (dB) 0-17 Variable
Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)
Supply Voltage 180-264 VAC, -48VDC (-103 model)
Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)
Rx Gain Range 0-12 dB
Input Intercept Point IIP3 (dBm) 0.0
Tx Rejection In Rx Band (dB) 100
VSWR Alarm Threshold (dB) Adjustable
Return Loss, All Ports (dB) 14
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 16 W x 40 H x 38 D
Weight(lbs) 385 (175 kg)
RF Connectors 7/16 DIN-F, N-F
Number of MCPAs per Sector 1
Number of Sectors 3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP55
Lightning Protection 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION
Model Number Description Quantity
OS-1833-E0-003
OS-3, 1800 MHz, Trident 3 Sector, 3I/3O
Includes:
1
G3L-1829-120 modules 3
RF Conditioning Units (RFCU) 3
220VAC Rectifiers 4
OS-1833-E0-103 -48VDC version of OS-1833-E0-003

Includes four -48VDC rectifiers instead of


220VAC rectifiers

OS-1833-E0-001
OS-3, 1800 MHz, Trident 1 Sector, 3I/3O
Includes:
1
G3L-1829-120 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifiers 2
INST-1833-E0-001 1 Sector Upgrade Kit
Includes:
G3L-1829-120 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifier 1

Updated: Sep 16 2011 1:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 26

POWERWAVE Outdoor Booster Systems





OS-1933-E0-XXX OS-3 3 Sector Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link 1930-1995
Frequency (MHz) Up Link 1850-1915
System Output Power 150W*
IMD Specification -65 dBc*
Instantaneous Bandwidth 65 (with G3L-1929-160 module)
Tx Gain Range (dB) 0-17 Variable
Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)
Supply Voltage 180-264 VAC, -48VDC (-103 model)
Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)*
Rx Gain Range 0-12 dB
Input Intercept Point IIP3 (dBm) 0.0
Tx Rejection In Rx Band (dB) 100
VSWR Alarm Threshold (dB) Adjustable
Return Loss, All Ports (dB) 14
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 16 W x 40 H x 38 D
Weight(lbs) 385 (175 kg)
RF Connectors 7/16 DIN-F, N-F
Number of MCPAs per Sector 1
Number of Sectors 3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP55
Lightning Protection 20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION
Model Number Description Quantity
OS-1933-E0-003
OS-3, 1900 MHz, Trident 3 Sector, 3I/3O
Includes:
1
G3L-1929-160 modules 3
RF Conditioning Units (RFCU) 3
220VAC Rectifiers 4
OS-1933-E0-103 -48VDC version of OS-1933-E0-003

Includes four -48VDC rectifiers instead of


220VAC rectifiers

OS-1933-E0-001
OS-3, 1900 MHz, Trident 1 Sector, 3I/3O
Includes:
1
G3L-1929-160 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifiers 2
INST-1933-E0-001 1 Sector Upgrade Kit
Includes:
G3L-1929-160 module 1
RF Conditioning Unit (RFCU) 1
220VAC Rectifier 1

Updated: Jan 25 2011 4:27PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 27

POWERWAVE Outdoor Booster Systems





* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
OS-1991-H0-XXX OS-3 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link 1930-1995
Frequency (MHz) Up Link 1850-1915
System Output Power 335** Watts
IMD Specification -65* dBc
Instantaneous Bandwidth 45/65
Tx Gain Range (dB) duplex/simplex: 3 MCPAs: 0.0 to +16.2/17.0, 2 MCPAs: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2
Rx Path Insertion Loss 3.0 max (-003, -103, -200 versions)
Supply Voltage -36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version)
Noise Figure (dB) 2.5 at max Rx gain (-004 version)
Rx Gain Range 0-12 dB in 1 dB increments (-004 version only)
Input Intercept Point IIP3 (dBm) 0.0 (-004 version only)
Tx Rejection In Rx Band (dB) 100 min
VSWR Alarm Threshold (dB) N/A
Return Loss, All Ports (dB) 14 min.
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 405 x 774 x 864 (14x 26x 210)
Weight(lbs) 255 lbs, fully populated, with 3 MCPA modules
RF Connectors 7/16 DIN Female
Number of MCPAs per Sector 3
Number of Sectors 1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP55
Lightning Protection 20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number Description Quantity
Choose one of:
G3L-1929-160 160W MCPA module 1-3
G3L-1929-120 120W MCPA module 1-3
Choose one of:
OS-1991-H0-003 220 VAC Enclosure - TMA model 1
OS-1991-H0-004
220 VAC Enclosure - LNA with DC bypass
option for TMA bias
1
OS-1991-H0-103 -48 VDC Enclosure - TMA model 1
OS-1991-H0-200 +27 VDC Enclosure - TMA model 1







Updated: Dec 5 2010 4:49PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 28

POWERWAVE Outdoor Booster Systems





* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW
OS-2133-E0-XXX OS-3 3 Sector Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link 2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series)
Frequency (MHz) Up Link 1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series)
System Output Power 105W**
IMD Specification -65 dBc*
Instantaneous Bandwidth 60 (UMTS, -X1X series) 45 (AWS, -X4X series)
Tx Gain Range (dB) 0-17 Variable
Rx Path Insertion Loss 0.5dB* (RF Bypass Mode)
Supply Voltage 180-264 VAC (-0XX series), -48VDC (-1XX series)
Noise Figure (dB) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)
Rx Gain Range 0-12 dB
Input Intercept Point IIP3 (dBm) 0.0
Tx Rejection In Rx Band (dB) 100
VSWR Alarm Threshold (dB) adjustable
Return Loss, All Ports (dB) 14
Impedance All Ports (Ohms) 50
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) 16 W x 40 H x 38 D
Weight(lbs) 385 (175 kg)
RF Connectors 7/16 DIN-F, N-F
Number of MCPAs per Sector 1
Number of Sectors 3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range -20 C to +50 C
Ingress Protection Class IP55
Lightning Protection 20kA EIC 61000-4-5, 8/20
ORDERING INFORMATION
Model Number Description Quantity
OS-2133-E0-013 Enclosure: 3I3O, UMTS (Band 1),220 VAC 1
OS-2133-E0-043 Enclosure: 3I3O, AWS (Band 4),220 VAC 1
OS-2133-E0-113 Enclosure: 3I3O, UMTS (Band ),-48 VDC 1
OS-2133-E0-143 Enclosure: 3I3O, AWS (Band 4),-48VDC 1
Models above include:
G3L-2129-140 amplifier modules 3
Frequency-specific RF Conditioning Units 3
220 VAC Rectifiers (AC enclosures only) 4
OS-2133-E0-041 Enclosure: 3I3O, AWS (Band 4), 220 VAC 1
Incl: G3L-2129-140 amplifier module 1
AWS RF Conditioning Unit 1
220VAC Rectifiers 2
INST-2133-E0-041
AWS Upgrade Kit, includes: G3L-2129-140
amplifier module
1
AWS RF Conditioning Unit 1
220 VAC Rectifier 1

Updated: May 18 2011 12:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 29
Tower Mounted Amplifers
Powerwave offers one of the most extensive tower mounted
amplifer (TMA) product portfolios, including single, twin
and dual band TMAs. Our TMA design offers a low noise
amplifer that provides superior receive system performance
and reliability, and is fully compatible with 2G, 3G and
4G(LTE) systems. Powerwave TMAs are designed for
the harshest environments to include desert and polar
climates and extreme environments such as rain forests.
Powerwave TMAs are also part of the Powerwave Clean
Site

Solutions which provides multiple benefts such as


reduced installation cost, reuse of existing building permits
and reduced visual impact to base stations.
TMA Products
Power wave
Tower Mounted
Amplifers
Power Distribution Unit
Current Injectors

TMA Type Up-Link (MHz) Down-Link (MHz) Part Number Page
TMA-DD Micro Twin 2100 1920-1980 2110-2170 LGP215nn 33
TMA Twin 2600 2500-2700 2620-2690 TT26-0000112-0n1 35
TMA 800 Digital Dividend 832-862 791-821 TT8D-0000112-0n1 37
TMA Twin 800 AISG 824-849 869-894 24501, 24511 39
TMA-DD Twin 2100 15 MHz 1969.7-1984.7 2110-2170 010-11177-0214 40
TMA-DD Twin 2100 15 MHz 1920.5-1935.5 2110-2170 010-11182-02nn 41
TMA-DD Twin 2100 15 MHz 1964.9-1979.9 2110-2170 010-11183-02nn 42
TMA-DD Twin 2100 15 MHz 1950-1965 2110-2170 010-50025-0232 43
TMA Twin 900 AISG 890-915 935-960 25001, 25011 44
TMA Twin 900 AISG 880-908 925-953 25002, 25012 45
TMA Twin 900 AISG 890-915 935-960 25014, 25016 46
TMA Single 900 AISG 890-915 935-960 25101, 25111 47
TMA Single 900 AISG 890-915 935-960 25102, 25112 48
TMA Single 900 AISG 890-915 935-960 25103, 25113 49
TMA-DD EGSM 880-915 925-960 LGP192nn 50
TMA-DD 850 MHz SMR
Rejection
824-849 869-894 LGP174nn 51
TMA-DD 1900 1850-1910 1930-1990 LGP175nn 52
TMA-DD 1800 Twin AISG 2.0 1710-1785 1805-1880
LGP18510,
LGP18520
53
TMA-DD 1800 Twin AISG 2.0 1710-1785 1805-1880
LGP18520,
LGP18521
54
TMA-DD 1800 Twin AISG 2.0 1710-1785 1805-1880 LGP185nn 55
POWERWAVE

TMA Products

Tower Mounted Amplifiers
Base Station Products
Tower Mounted Amplifiers
31

TMA Type Up-Link (MHz) Down-Link (MHz) Part Number Page
TMA-DD 1900 Twin 1850-1910 1930-1990 LGP186nn 56
TMA-DD 1900 Twin 1850-1910 1930-1990 LGP18611 57
TMA Dual Band AWS
with 700 Bypass
1710-1770 with 698-746
bypass
2110-2170 with 698-
746 bypass
TSAW-07BP111-001 58
TMA Twin Dual Band
AWS with 700 Bypass
1710-1770 with 698-746
bypass
2110-2170 with 698-
746 bypass
TTAW-07BP111-001 59
TMA Micro Twin AWS 1710-1755 2110-2155 TTAW-0000112-001 60
TMA Micro Twin AWS 1710-1770 2110-2170 TTAW-60BW111-001 61
TMA Dual Band
700/AWS
698-716 MHz and 1710-
1770 MHz
728-746 and 2110-
2170
TS07-AWDB111-001 62
TMA Dual Band
700/AWS
698-716 MHz and 1710-
1770 MHz
728-746 and 2110-
2170
TS07-AWDB112-001 63
TMA Twin 850/1900
Dual Band
824-849 /1850-1910 869-894 /1930-1990 TT08-19DB111-001 64
TMA Twin 1900 with
850 Bypass
1850-1910 with 824-894
bypass
1930-1990 with 824-
894 bypass
TT19-08BP111-001 65
ACTIVE UGC 900 890-915 935-960 TU09-000001n-001 66
ACTIVE UGC 900 890-915 935-960 TU9E-28BW01n-00n 67
POWERWAVE

TMA Products

Tower Mounted Amplifiers
Base Station Products
Tower Mounted Amplifiers
32

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
LGP215nn




Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 2100 TMA offers state of the art performance,
size and weight enclosure in Twin configuration, two TMAs in one housing
with market leading reliability.
Features:
G AISG 1.1 and 2.0 compatible
G Current Alarm Mode (When no AISG is connected)
G Twin configuration, 2 TMAs in one and same housing
G Market leading reliability
G Low Noise Figure
G Low TX insertion loss
G Easy to install wall mount bracket and hose clams for pole mount
included
G No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz) 1920-1980
Rejection >85 dB (2110-2170 MHz)
Gain (dB) 12
Return Loss >18 dB
Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
Bypass Loss (dB) <2.0 dB, Typical
Max Input Power (dBm) +14
Downlink
Frequency Range (MHz) 2110-2170
Return Loss >20 dB
Insertion Loss (dB) 0.3 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port
Power Handling, RMS >49 dBm (4x43 dBm)
Power Supply & Alarm
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality
AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA;
LGP21508, 18: current alarm compatible with PDU LGP121nn
Power Consumption @12 VDC, 1.5 W per LNA
AISG Compatibility LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 2 2011 1:31PM
D031-08222 Rev D
33

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
LGP215nn
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) 154 x 192 x 50 (6x8x2)
Weight (lbs) 2.5kg (5.5 lbs)
Color Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transport ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65 and IP68
APPROVALS AND TESTS
Safety EN 60 950
EMC ETSI 125 113
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214. Seal the 7/16 connectors according to the
in the package enclosed instruction 100-11279-001.
BLOCK DIAGRAM


MECHANICAL OUTLINE

ACCESSORIES
LGP21301, LGP21302 Outdoor Current Injector (01 female , 02 male ANT conn.) D100314, D100312 PDU Power Cable (14: 7m, 12: 3m)
LGP23301, LGP23303 Outdoor Current Injector (01 female , 02 male ANT conn.) 7060.00, 7060.05 CILOC (ANT)
LGP12101, 02, 03, 04 Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) 7060.10, 7060.15 CILOC (BTS)
D100301, LG705 Indoor CIN cable (01: 7m, 05: 3m) 7070.10, 7070.30, 7070.50 MCU (10: AC, 30: 24V, 50: -48V)
D105104, D105103 Outdoor CIN Cable (04: 10.3m, 03: 3m)
D100315, D100313 PDU Alarm Cable (15: 7m, 13: 3m)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 2 2011 1:31PM
D031-08222 Rev D
34

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
TT26-0000112-0n1




TMA Twin 2600 12 dB AISG 2.0
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 2600 TMA offers state of the art performance,
size and weight enclosure in Twin configuration, two TMAs in one housing
with market leading reliability.
Features:
G AISG compatible
G Current Alarm Mode (When no AISG is connected)
G Twin configuration, 2 TMAs in one and same housing
G Market leading reliability
G State of the art low Noise Figure
G Low TX insertion loss
G Easy to install, wall mount bracket and hose clams for pole mount
included
G No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz) 2500-2570
Rejection >85 dB
Gain (dB) 12
Return Loss >18
Noise Figure 1.1 dB, Typical (TT26-0000112-011); 1.3 dB (TT26-0000112-001)
UL Output 3rd Order Intercept Point (dBm) >+24
Bypass Loss (dB) <2.0, Typical (Valid for TT26-0000112-001, TT26-0000112-011 without bypass)
Max Input Power (dBm) +14
Downlink
Frequency Range (MHz) 2620-2690
Return Loss >18
Insertion Loss (dB) 0.4, Typical
Intermodulation @ 2 x +43 dBm Tx carriers in receive band, < -117 dBm, reffered to antenna port
Power Handling, RMS >52 dBm (>160W)
Power Supply & Alarm
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8 -30
Alarm Functionality AISG compatible or in case of no AISG command received current alarm mode 170-190 mA
Power Consumption <1.1 W per branch @ 12V
AISG Compatibility AISG 2.0
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 8 2011 3:49PM
Rev pA3
35

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
TT26-0000112-0n1
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) 239x172x73 mm (9.4x6.8x2.9)
Weight (lbs) <4.5kg (9.9 lbs)
Color Off white (NCS 1502-R)
RF Connectors DIN 7/16 female, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range -40C to +65C (-40F to + 149F)
Operational ETS 300 019-1-4
Transport ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65 and IP68
APPROVALS AND TESTS
Safety EN60950
EMC 3GPP: TS 25.113
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214.
BLOCK DIAGRAM


MECHANICAL OUTLINE

ACCESSORIES
LGP21301, LGP21302 Outdoor Current Injector (01 female , 02 male ANT conn.) D100314, D100312 PDU Power Cable (14: 7m, 12: 3m)
LGP23301, LGP23303 Outdoor Current Injector (01 female , 02 male ANT conn.) 7060.00, 7060.05 CILOC (ANT)
LGP12101, 02, 03, 04 Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) 7060.10, 7060.15 CILOC (BTS)
D100301, LG705 Indoor CIN cable (01: 7m, 05: 3m) 7070.10, 7070.30, 7070.50 MCU (10: AC, 30: 24V, 50: -48V)
D105104, D105103 Outdoor CIN Cable (04: 10.3m, 03: 3m)
D100315, D100313 PDU Alarm Cable (15: 7m, 13: 3m)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 8 2011 3:49PM
Rev pA3
36

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
TT8D-0000112-0n1




TMA Twin 800 Digital Dividend 12 dB AISG 2.0 (Preliminary)
Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 800 Digital Dividend TMA offers state of the art
performance, size and weight enclosure in Twin configuration, two TMAs in
one housing with market leading reliability.
Features:
G AISG compatible
G Current Alarm Mode (When no AISG is connected)
G Twin configuration, 2 TMAs in one and same housing
G Market leading reliability
G Low Noise Figure
G Low TX insertion loss
G Easy to install wall mount bracket and hose clams for pole mount
included
G No Maintenance
ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz) 832-862
Rejection >80 dB
Gain (dB) 12
Return Loss >18 dB
Noise Figure <1.4dB, Typical
UL Output 3rd Order Intercept Point (dBm) >+23
Bypass Loss (dB) <1.6 Typical
Max Input Power (dBm) +14
Downlink
Frequency Range (MHz) 791-821
Return Loss >18 dB
Insertion Loss (dB) 0.4, Typical
Intermodulation @ 2 x +43 dBm Tx carriers in receive band, <-115 dBm
Power Handling, RMS >55 dBm
Power Supply & Alarm
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality AISG compatible or in case of no AISG command received current alarm mode 170-190 mA
Power Consumption <1.1 W per branch @ 12V
AISG Compatibility AISG 2.0
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 8 2011 3:56PM
Rev pA2
37

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Tower Mounted Amplifiers
TT8D-0000112-0n1
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch) 273x170x120 mm
Weight (lbs) <7kg (15.5 lbs)
Color Off white (NCS 1502-R)
RF Connectors DIN 7/16 female, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL
Temperature Range -40C to +65C (-40F to + 149F)
Operational ETS 300 019-1-4
Transport ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65 and IP68
APPROVALS AND TESTS
Safety EN60950
EMC 3GPP: TS 25.113
INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214.
BLOCK DIAGRAM


MECHANICAL OUTLINE

ACCESSORIES
LGP21301, LGP21302 Outdoor Current Injector (01 female , 02 male ANT conn.) D100314, D100312 PDU Power Cable (14: 7m, 12: 3m)
LGP23301, LGP23303 Outdoor Current Injector (01 female , 02 male ANT conn.) 7060.00, 7060.05 CILOC (ANT)
LGP12101, 02, 03, 04 Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19) 7060.10, 7060.15 CILOC (BTS)
D100301, LG705 Indoor CIN cable (01: 7m, 05: 3m) 7070.10, 7070.30, 7070.50 MCU (10: AC, 30: 24V, 50: -48V)
D105104, D105103 Outdoor CIN Cable (04: 10.3m, 03: 3m)
D100315, D100313 PDU Alarm Cable (15: 7m, 13: 3m)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 8 2011 3:56PM
Rev pA2
38

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

24501, 24511 TMA Twin 800 12 dB SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 824-849
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0 dB, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 869-894
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x120 (9x6.7x4.8)
Weight (lbs) <6 kg (13.2 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL 1950, ETL
EMC ETS 300 342-3

Rev A Updated: Feb 4 2010 11:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 39

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

010-11177-0214 Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1969.7-1984.7
UL Rejection 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz
UL Gain (dB) 12
UL Return Loss > 18 dB
UL Noise Figure Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) <1.8 Typical. 3.7 Max
UL Max Input Power (dBm) +10
DL Frequency Range (MHz) 2110-2170
DL Return Loss > 18 dB
DL Insertion Loss (dB) Max 0.4
Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Functionality Alarm Current: 250 mA
Power Consumption Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS 52 dBm CW; 62 dBm peak
AISG Compatibility 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)
Weight (lbs) <4.5 Kg (9.9)
Colors Off white (NCS 1502-R)
RF Connectors 7/16 Female
Mounting Kit Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >350.000 Hours
Ingress Protection IP 68
APPROVALS AND TESTS*
Safety EN 60950
EMC ETS 125 113

Updated: 2009-05-05 17:29:05Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 40

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

010-11182-02nn Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1920.5-1935.5
UL Rejection 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz
UL Gain (dB) 12
UL Return Loss > 18 dB
UL Noise Figure Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) <1.8 Typical. 3.7 Max
UL Max Input Power (dBm) +10
DL Frequency Range (MHz) 2110-2170
DL Return Loss > 18 dB
DL Insertion Loss (dB) Max 0.4
Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Functionality Alarm Current -0202: 250 mA
Power Consumption Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS 52 dBm CW; 62 dBm peak
AISG Compatibility 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)
Weight (lbs) <4.5 Kg (9.9)
Colors Off white (NCS 1502-R)
RF Connectors 7/16 Female
Mounting Kit Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-11
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >350.000 Hours
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN 60950
EMC ETS 125 113

Updated: 2009-05-05 17:29:49Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 41

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

010-11183-02nn Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1964.9-1979.9
UL Rejection 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz
UL Gain (dB) 12
UL Return Loss > 18 dB
UL Noise Figure Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) <1.8 Typical. 3.7 Max
UL Max Input Power (dBm) +10
DL Frequency Range (MHz) 2110-2170
DL Return Loss > 18 dB
DL Insertion Loss (dB) Max 0.4
Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Functionality Alarm Current -0202: 250 mA; -0232: 180 mA
Power Consumption Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS 52 dBm CW; 62 dBm peak
AISG Compatibility 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)
Weight (lbs) <4.5 Kg (9.9)
Colors Off white (NCS 1502-R)
RF Connectors 7/16 Female
Mounting Kit Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >350.000 Hours
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN 60950
EMC ETS 125 113

Updated: Sep 21 2009 8:14AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 42

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

010-50025-0232 Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1950-1965
UL Rejection 3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz
UL Gain (dB) 12
UL Return Loss > 18 dB
UL Noise Figure Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) <1.8 Typical. 3.7 Max
UL Max Input Power (dBm) +10
DL Frequency Range (MHz) 2110-2170
DL Return Loss > 18 dB
DL Insertion Loss (dB) Max 0.4
Intermodulation <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm
Input Voltage (V) AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Functionality Alarm Current: 180 mA
Power Consumption Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS 52 dBm CW; 62 dBm peak
AISG Compatibility 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 340x171x70 mm (13.4x6.7x2.8 inch)
Weight (lbs) <4.5 Kg (9.9)
Colors Off white (NCS 1502-R)
RF Connectors 7/16 Female
Mounting Kit Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >350.000 Hours
Ingress Protection IP 68
APPROVALS AND TESTS*
Safety EN 60950
EMC ETS 125 113

Updated: Sep 21 2009 8:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 43

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25001, 25011 TMA Twin 900 12 dB SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 890-915
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0 dB, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 935-960
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x120 (9x6.7x4.8)
Weight (lbs) <6 kg (13.2 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

Rev A Updated: Apr 18 2011 5:41PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 44

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25002, 25012 TMA Twin 900 EGSM 28 MHz 12 dB SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 880-908
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 925-953
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @ 12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 25002 AISG 1.1 (Field upgradable to AISG 2.0); 25012 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x120 (9x6.7x4.8)
Weight (lbs) <6 kg (13.2 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL 1950, ETL
EMC ETS 300 342-3

Rev A Updated: Dec 29 2009 12:47PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 45

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25014, 25016 TMA Twin 900 16 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 890-915
UL Rejection >82 dB
UL Gain (dB) 16
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0 dB, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 935-960
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode: 25014 170-190 mA; 25016
high CWA alarm current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x120 (9x6.7x4.8)
Weight (lbs) <6 kg (13.2 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

Rev A Updated: Dec 9 2010 9:45AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 46

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25101, 25111 TMA Single 900 12 dB SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 890-915
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0 dB, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 935-960
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 25101 AISG1.1 (Field upgradable to AISG 2.0); 25111 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x69 (9x6.7x2.7)
Weight (lbs) <3 kg (<6.7 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

Rev A Updated: Apr 18 2011 5:43PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 47

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25102, 25112 TMA Single 900 EGSM 28 MHz 12 dB SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 880-908
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 925-953
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @ 12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 25102 AISG 1.1 (Field upgradable to AISG 2.0); 25112 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x69 (9x6.7x2.7)
Weight (lbs) <3 kg (<6.7 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL 1950, ETL
EMC ETS 300 342-3

Rev A Updated: Feb 19 2010 6:10AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 48

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

25103, 25113 TMA Single 900 12 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 890-915
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.4 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.0 dB, Typical
UL Max Input Power (dBm) +10 dBm
DL Frequency Range (MHz) 935-960
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4, Typical
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current
Window Alarm)
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility 25103 AISG1.1 (Field upgradable to AISG 2.0); 25113 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 228x169x69 (9x6.7x2.7)
Weight (lbs) <3 kg (<6.7 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

Rev A Updated: Apr 18 2011 5:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 49

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP192nn Dual Duplex EGSM 900 MHz Full Band
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 880-915
UL Rejection >83 dB
UL Gain (dB) 12
UL Return Loss >20 dB, Typical
UL Noise Figure < 1.7 dB, Typical
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) 2.0, Typical
UL Max Input Power (dBm) +10
DL Frequency Range (MHz) 925-960
DL Return Loss > 20 dB, Typical
DL Insertion Loss (dB) <0.7 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158)
Input Voltage (V) 8-17
Alarm Functionality LGP19203 alarm current 170-190 mA; LGP19201 current alarm compatible with PDU LGP121nn
Power Consumption @12 VDC, 1.5 W
Power Handling, RMS >52 dBm
AISG Compatibility N/A
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272 x 89 (7x11x4)
Weight (lbs) <5.7 kg (12.3 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65
APPROVALS AND TESTS*
Safety EN 60 950
EMC ETS 300 342-3

D031-08405 Rev B Updated: Apr 18 2011 5:41PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 50

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP174nn TMA DD 850 MHz with SMR Rejection
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 824-849
UL Rejection SMR Rejection, >30 dB @ 851 MHz
UL Gain (dB) 12
UL Return Loss >21 dB, Typical
UL Noise Figure < 1.7 dB, Typical
UL Output 3rd Order Intercept Point (dBm) > +23, Typical
UL Bypass Loss (dB) <2.2
UL Max Input Power (dBm) +14
DL Frequency Range (MHz) 869-894
DL Return Loss > 21 dB, Typical
DL Insertion Loss (dB) < 0.45 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161)
Input Voltage (V) 8-17
Alarm Functionality Two levels, individually supervised LNAs
Power Consumption @12 VDC, 1.2 W
Power Handling, RMS >57 dBm
AISG Compatibility N/A
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 181 x 365 x 66 (7x12x4)
Weight (lbs) <7.9 kg (17.4 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65
APPROVALS AND TESTS*
Safety UL60 950
EMC FCC Part 15

D031-08411 Rev. A with added Bypass Loss Aug 24


2010 Updated: Apr 18 2011 5:39PM
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 51

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP175nn TMA DD 1900 MHz with 10 dB Rejection at 1912 MHz
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1850-1910
UL Rejection @1912 MHz, >10 dB
UL Gain (dB) 12
UL Return Loss >20 dB
UL Noise Figure < 1.6 dB
UL Output 3rd Order Intercept Point (dBm) > +23
UL Bypass Loss (dB) <2.6 dB
UL Max Input Power (dBm) +14
DL Frequency Range (MHz) 1930-1990
DL Return Loss > 20 dB
DL Insertion Loss (dB) < 0.5 dB
Intermodulation 2 Tx@43 dBm (dBc), <-158
Input Voltage (V) 8-17
Alarm Functionality Two levels, individually supervised LNAs
Power Consumption @12 VDC, 1.2 W
Power Handling, RMS >54 dBm
AISG Compatibility N/A
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 181 x 365 x 66 (7x12x4)
Weight (lbs) 6.4 kg (14.1 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65
APPROVALS AND TESTS*
Safety UL60 950
EMC FCC Part 15

PNLGP175nn Updated: Apr 18 2011 5:38PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 52

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP18510,
LGP18520
Twin Dual Duplex 1800 MHz Full Band
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1785
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.5 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +26 dBm, Typical
UL Bypass Loss (dB) < 3.0 dB, Typical
UL Max Input Power (dBm) +12
DL Frequency Range (MHz) 1805-1880
DL Return Loss > 18 dB
DL Insertion Loss (dB) 0.4 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA
Power Consumption @12 VDC, 1.5 W per LNA
Power Handling, RMS >53 dBm
AISG Compatibility LGP18510 AISG 1.1 (field upgrdable to AISG 2.0), LGP18520 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272.5 x 67.7 (7x11x3)
Weight (lbs) <4.5kg (9.9 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP 68
APPROVALS AND TESTS*
Safety EN 60 950
EMC ETS 301 489

D031-08228 Rev A Updated: May 30 2011 9:03AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 53

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP18520,
LGP18521
Twin Dual Duplex 1800 MHz Full Band
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1785
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.5 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +26 dBm, Typical
UL Bypass Loss (dB) < 3.0 dB, Typical
UL Max Input Power (dBm) +12
DL Frequency Range (MHz) 1805-1880
DL Return Loss > 18 dB
DL Insertion Loss (dB) 0.4 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality
AISG compatible or in case of no AISG command received current alarm mode. Current alarm: LGP18520:
Low CWA, LGP18521: High CWA
Power Consumption @12 VDC, 1.5 W per LNA
Power Handling, RMS >53 dBm
AISG Compatibility AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272.5 x 67.7 (7x11x3)
Weight (lbs) <4.5kg (9.9 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP 68
APPROVALS AND TESTS*
Safety EN 60 950
EMC ETS 301 489

Updated: Apr 18 2011 5:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 54

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP185nn Twin Dual Duplex 1800 MHz Full Band
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1785
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.5 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +26 dBm, Typical
UL Bypass Loss (dB) < 3.0 dB, Typical
UL Max Input Power (dBm) +12
DL Frequency Range (MHz) 1805-1880
DL Return Loss > 18 dB
DL Insertion Loss (dB) 0.4 dB, Typical
Intermodulation @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality
LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn;
LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode:
LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn
Power Consumption @12 VDC, 1.5 W per LNA
Power Handling, RMS >53 dBm
AISG Compatibility LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272.5 x 67.7 (7x11x3)
Weight (lbs) <4.5kg (9.9 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP 68 (LGP18501, 06 upgraded from IP65 to IP68 week 36 2011)
APPROVALS AND TESTS*
Safety EN 60 950
EMC ETS 301 489

D031-08219 Rev D Updated: Sep 8 2011 10:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 55

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP186nn Twin Dual Duplex 1900 MHz Full Band
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1850-1910
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.5 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +26 dBm, Typical
UL Bypass Loss (dB) < 3.0 dB, Typical
UL Max Input Power (dBm) +12
DL Frequency Range (MHz) 1930-1990
DL Return Loss > 18 dB
DL Insertion Loss (dB) 0.4 dB, Typical
Intermodulation @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality
LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn;
LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode:
LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn
Power Consumption @12 VDC, 1.5 W per LNA
Power Handling, RMS >53 dBm
AISG Compatibility LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272.5 x 67.7 (7x11x3)
Weight (lbs) <4.5kg (9.9 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP 68 (LGP18601, 06 upgraded from IP65 to IP68 week 36 2011)
APPROVALS AND TESTS*
Safety UL60 950, ETL
EMC FCC Part 15

D031-08220 Rev C Updated: Sep 8 2011 11:03AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 56

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LGP18611 Twin Dual Duplex 1900 MHz Full Band (65 MHz BW)
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1850-1915
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure 1.5 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +26 dBm, Typical
UL Bypass Loss (dB) 3.0 dB, Typical
UL Max Input Power (dBm) +12
DL Frequency Range (MHz) 1930-1995
DL Return Loss > 18 dB
DL Insertion Loss (dB) 0.5 dB, Typical
Intermodulation @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality LGP18611: AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA
Power Consumption @12 VDC, 1.5 W per LNA
Power Handling, RMS >53 dBm
AISG Compatibility AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 169 x 272.5 x 67.7 (7x11x3)
Weight (lbs) <4.5kg (9.9 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP 68
APPROVALS AND TESTS*
Safety UL60 950, ETL
EMC FCC Part 15

D031-08230 Rev A Updated: Oct 3 2011 11:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 57

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TSAW-07BP111-001 TMA Dual Band AWS with 700 Bypass 13 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1770 with 698-746 bypass
UL Rejection >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz
UL Gain (dB) 13
UL Return Loss >18 dB
UL Noise Figure <1.6 dB
UL Output 3rd Order Intercept Point (dBm) >+23 (Input IP3 >+11)
UL Bypass Loss (dB) <1.9
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 2110-2170 with 698-746 bypass
DL Return Loss >18 dB
DL Insertion Loss (dB) <0.4
Intermodulation <-155 dBc (2x43 dBm TX)
Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <1.5 W
Power Handling, RMS 700: 500 W; AWS 300W
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TSAW-07BP112-
001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 250x169x82 (9.9x6.7x3.1)
Weight (lbs) <9 (<4 kg)
Colors Off white (NCS 1502-R)
RF Connectors Female 7/16 DIN, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40 to +65C
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s
Housing Aluminium
MTBF >1 million hours
Ingress Protection IP67 minimum
APPROVALS AND TESTS*
Safety UL 60950; UL 1950, TUV
EMC FCC part 15

Updated: Dec 2 2010 4:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 58

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TTAW-07BP111-001 TMA Twin Dual Band AWS with 700 Bypass 13 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1770 with 698-746 bypass
UL Rejection >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz
UL Gain (dB) 13
UL Return Loss >18 dB
UL Noise Figure <1.6 dB
UL Output 3rd Order Intercept Point (dBm) >+23 (Input IP3 >+11)
UL Bypass Loss (dB) <1.9
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 2110-2170 with 698-746 bypass
DL Return Loss >18 dB
DL Insertion Loss (dB) <0.4
Intermodulation <-155 dBc (2x43 dBm TX)
Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <1.5 W
Power Handling, RMS 700: 500 W; AWS 300W
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-07BP112-
001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 250x169x139 (9.9x6.7x5.4)
Weight (lbs) <18 (<8 kg)
Colors Off white (NCS 1502-R)
RF Connectors Female 7/16 DIN, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40 to +65C
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s
Housing Aluminium
MTBF >1 million hours
Ingress Protection IP67 minimum
APPROVALS AND TESTS*
Safety UL 60950; UL 1950, TUV
EMC FCC part 15

Updated: Dec 2 2010 4:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 59

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TTAW-0000112-001 TMA Micro Twin AWS 12 dB AISG 2.0
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1755
UL Rejection >82 dB
UL Gain (dB) 12
UL Return Loss >20
UL Noise Figure <1.4 dB
UL Output 3rd Order Intercept Point (dBm) >+23
UL Bypass Loss (dB) <2.0, Typical
UL Max Input Power (dBm) +14
DL Frequency Range (MHz) 2110-2155
DL Return Loss >20
DL Insertion Loss (dB) <0.3
Intermodulation @ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 9 -17
Alarm Functionality AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA
Power Consumption <1.1 W per branch @ 12V
Power Handling, RMS >49 dBm (4x43 dBm)
AISG Compatibility AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 192x154x50 mm (7.6x5.9x2.0)
Weight (lbs) <2.5kg (5.5 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to + 149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours
Ingress Protection IP65 and IP68
APPROVALS AND TESTS*
Safety EN60950
EMC 3GPP: TS 25.113

Rev B Updated: Oct 6 2010 9:01AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 60

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TTAW-60BW111-001 TMA Micro Twin AWS 60 MHz BW 12 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1710-1770
UL Rejection >80 dB
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure
<1.8 dB Max over temp; Average Weighted NF* @ +25C <1.3 dB
(NF@low_bandedge+2xNF@midband+NF@high_bandedge)/4*
UL Output 3rd Order Intercept Point (dBm) >+22 (Input IP3 >+10)
UL Bypass Loss (dB) <2.6
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 2110-2170
DL Return Loss >18 dB
DL Insertion Loss (dB) <0.35
Intermodulation <-155 dBc (2x43 dBm TX)
Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <2 W
Power Handling, RMS 300 W
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-
60BW112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 192x154x50 mm (7.6x5.9x2.0)
Weight (lbs) <7 (<3 kg)
Colors Off white (NCS 1502-R)
RF Connectors Female 7/16 DIN, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40 to +65C
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s
Housing Aluminium
MTBF >1 million hours per TMA
Ingress Protection IP67 minimum
APPROVALS AND TESTS*
Safety UL 60950; UL 1950, TUV
EMC FCC part 15

Rev A Updated: Nov 18 2011 12:30PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 61

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TS07-AWDB111-001 TMA Dual Band 700/AWS 13 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 698-716 and 1710-1770
UL Rejection
TX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz; AWS TMA: >25 dB rejection at
1700 and 1800 MHz
UL Gain (dB) 13
UL Return Loss >18 dB
UL Noise Figure AWS: < 1.6 dB, 700: <2.0 dB
UL Output 3rd Order Intercept Point (dBm) >+22 (Input IP3 >+10)
UL Bypass Loss (dB) AWS: <2.0, 700: < 2.9
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 728-746 and 2110-2170
DL Return Loss >18 dB
DL Insertion Loss (dB) <0.4
Intermodulation <-155 dBc (2x43 dBm TX)
Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <1.5 W (per LNA)
Power Handling, RMS 700: 500 W; AWS 300W
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TS07-
AWDB112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 305x305x127 (12x12x5)
Weight (lbs) <27.6 (<12.5 kg)
Colors Off white (NCS 1502-R)
RF Connectors Female 7/16 DIN, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40 to +65C
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s
Housing Aluminium
MTBF >1 million hours per TMA
Ingress Protection IP67 minimum
APPROVALS AND TESTS*
Safety UL 60950; UL 1950, TUV
EMC FCC part 15

Updated: Dec 2 2010 4:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 62

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TS07-AWDB112-001 TMA Dual Band 700/AWS 13 dB AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 698-716 and 1710-1770
UL Rejection
>80 dB TX rejection, 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz (Roll off beginns at 699.25 and
714.75), AWS TMA: >25 dB at 1700 and 1800 MHz
UL Gain (dB) 13
UL Return Loss >18 dB
UL Noise Figure AWS: < 1.6 dB, 700: <2.0 dB
UL Output 3rd Order Intercept Point (dBm) >+22 (Input IP3 >+10)
UL Bypass Loss (dB) AWS: <2.0, 700: < 2.9
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 728-746 and 2110-2170
DL Return Loss >18 dB
DL Insertion Loss (dB) <0.4
Intermodulation <-155 dBc (2x43 dBm TX)
Input Voltage (V) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <1.5 W (per LNA)
Power Handling, RMS 700: 500 W; AWS 300W
AISG Compatibility AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 305x305x130 (12x12x5.2)
Weight (lbs) <30 (<13.6 kg)
Colors Off white (NCS 1502-R)
RF Connectors Female 7/16 DIN, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40 to +65C
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s
Housing Aluminium
MTBF >1 million hours per TMA
Ingress Protection IP67 minimum
APPROVALS AND TESTS*
Safety UL 60950; UL 1950, TUV
EMC FCC part 15

Updated: Dec 2 2010 4:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 63

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TT08-19DB111-001 TMA Twin Dual Band 850/1900 12 dB AISG 1.1
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 824-849 / 1850-1910
UL Rejection SMR Rejection, >30 dB @ 851 MHz
UL Gain (dB) 12
UL Return Loss >18 dB
UL Noise Figure <1.7 dB, Typical
UL Output 3rd Order Intercept Point (dBm) +25, Typical
UL Bypass Loss (dB) 2.5, Typical
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 869-894 / 1930-1990
DL Return Loss > 18 dB
DL Insertion Loss (dB) 850 MHz, 0.4; 1900 MHz, 0.5
Intermodulation @ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8 -17
Alarm Functionality AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA
Power Consumption < 1.8 W per branch @ 12V
Power Handling, RMS 850: >57 dBm; 1900: >55 dBm
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT08-19DB112-
001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 360x169x137mm (14.2x6.7x5.4)
Weight (lbs) <22
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to + 149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours (per TMA)
Ingress Protection IP65 and IP68
APPROVALS AND TESTS*
Safety EN 60950
EMC 3GPP: TS 25.113

Rev B Updated: Mar 28 2011 2:25PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 64

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TT19-08BP111-001 TMA Twin 1900 with 850 Bypass 12 dB AISG 1.1
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 1850-1910 with 824-894 bypass
UL Rejection >77 dB
UL Gain (dB) 12
UL Return Loss >18
UL Noise Figure <1.7 dB, Typical
UL Output 3rd Order Intercept Point (dBm) >+23
UL Bypass Loss (dB) 2.5, Typical
UL Max Input Power (dBm) +14 dBm
DL Frequency Range (MHz) 1930-1990 with 824-894 bypass
DL Return Loss >18
DL Insertion Loss (dB) 850 MHz, <0.3; 1900 MHz, <0.5
Intermodulation @ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8 -17
Alarm Functionality AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption <1.1W @12V
Power Handling, RMS 850: >57 dBm; 1900: >55 dBm
AISG Compatibility
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT19-08BP112-
001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 250x169x137 mm (9.9x6.7x5.4)
Weight (lbs) <16
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 female, long neck
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational ETS 300 019-1-4
Transportation ETS 300 019-1-2
Storage ETS 300 019-1-1
Lightning Protection 3 kA 10/350 s; 20 kA (Shield)
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP65 and IP68
APPROVALS AND TESTS*
Safety EN60950
EMC 3GPP: TS 25.113

Rev B Updated: Feb 4 2010 11:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 65

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TU09-000001n-001 ACTIVE UGC 900 12dB VAR GAIN SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 890-915
UL Rejection >82 dB
UL Gain (dB) Variable 0-12 in 1 dB steps
UL Return Loss >18 dB
UL Noise Figure 1.5dB, typical at 12 dB gain
UL Output 3rd Order Intercept Point (dBm) +25, typical
UL Bypass Loss (dB) <5.5 (Including 3 dB hybrid loss)
UL Max Input Power (dBm)
DL Frequency Range (MHz) 935-960
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.4
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU09-0000012-001 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 230.5x171x160 (9.1x6.8x6.3)
Weight (lbs) <7 kg (15.4 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational
Transportation
Storage
Lightning Protection
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

Updated: Jan 29 2010 5:11AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 66

POWERWAVE Tower Mounted Amplifiers
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

TU9E-28BW01n-001 ACTIVE UGC 900 EGSM 28MHz BW 12dB VAR GAIN SL AISG
ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz) 880-908
UL Rejection >82 dB
UL Gain (dB) Variable 0-12 in 1 dB steps
UL Return Loss >18 dB
UL Noise Figure 1.5dB, typical at 12 dB gain
UL Output 3rd Order Intercept Point (dBm) +25, typical
UL Bypass Loss (dB) <5.5 (Including 3 dB hybrid loss)
UL Max Input Power (dBm)
DL Frequency Range (MHz) 925-953
DL Return Loss >18 dB
DL Insertion Loss (dB) 0.65 maximum
Intermodulation <-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V) AISG Mode: 10-30; Current alarm mode: 8.5 -17
Alarm Functionality
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption @12 VDC, 1.5W per LNA
Power Handling, RMS >53.5 dBm
AISG Compatibility TU9E-28BW011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU9E-28BW012-001 AISG 2.0
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 230.5x171x160 (9.1x6.8x6.3)
Weight (lbs) <7 kg (15.4 lbs)
Colors Off white (NCS 1502-R)
RF Connectors DIN 7/16 Female
Mounting Kit Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range -40C to +65C (-40F to +149F)
Operational
Transportation
Storage
Lightning Protection
Housing Aluminum
MTBF >1 million hours per TMA
Ingress Protection IP68
APPROVALS AND TESTS*
Safety EN60950, UL1950, ETL
EMC ETS 300 342-3

D031-08819B Updated: Oct 21 2011 12:56PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 67

Title Up-Link (MHz) Down-Link (MHz) Part Number Page
PDU Lite Indoor N/A N/A LGP121nn 69
PDU Lite Indoor (For
Dual Band TMAs)
N/A N/A LGP18104 70
PDU Lite Indoor N/A N/A LGP12101 71
POWERWAVE

TMA Products

Power Distribution Units
Base Station Products
Power Distribution Units
68

POWERWAVE TMA Products



LGP121nn PDU Lite Indoor
ELECTRICAL DATA
Input Voltage 20 to 60 V DC, positive or negative
Input Current (Max) 1A
Input Protection and Polarity Automatic Polarity Agile
Output Voltage 12 V DC +/- 1 V
Output Current (Max) 375 mA/port
Output Protection Automatic short-circuit protection, auto recovery
Sum Alarm Output Port Relay Normally Open and Normally Closed
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft) 3.9 x 0.8 x 2.4 in
Weight (lbs) 120 g (0.3 lbs.)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -33C to +60C (-27F to +140F)
Humidity 5-95% RH non condensing
MTBF >1 million hours
APPROVALS AND TESTS
EMC ETS 300 342-3
Environmental ETS 300 019

D031-08280 Rev A Updated: Apr 18 2011 5:37PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 69

POWERWAVE TMA Products



LGP18104 PDU Lite Indoor (For Dual Band TMAs)
ELECTRICAL DATA
Input Voltage 20-60 V DC, positive or negative
Input Current (Max) 3x1 A
Input Protection and Polarity Automatic Polarity Agile
Output Voltage 12 V DC +/- 1 V
Output Current (Max) 375 mA/port
Output Protection Automatic short-circuit protection, auto recovery
Sum Alarm Output Port Relay Normally Open and Normally Closed
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft) 19 1HU (19 x 1.75)
Weight (lbs) 700 (1.55)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -33to +60 (-27to +140)
Humidity 5-95% RH non condensing
MTBF >1 000 000 hours (over 100 years)
APPROVALS AND TESTS
EMC ETS 300 342-3
Environmental ETS 300 019

Updated: Sep 21 2009 8:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 70

POWERWAVE TMA Products



LGP12101 PDU Lite Indoor
ELECTRICAL DATA
Input Voltage 20 to 60 V DC, positive or negative
Input Current (Max) 1A
Input Protection and Polarity Automatic Polarity Agile
Output Voltage 12 V DC +/- 1 V
Output Current (Max) 375 mA/port
Output Protection Automatic short-circuit protection, auto recovery
Sum Alarm Output Port Relay Normally Open and Normally Closed
MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft) 3.9 x 0.8 x 2.4 in
Weight (lbs) 120 g (0.3 lbs.)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -33C to +60C (-27F to +140F)
Humidity 5-95% RH non condensing
MTBF >1 million hours
APPROVALS AND TESTS
EMC ETS 300 342-3
Environmental ETS 300 019

D031-08280 Rev A Updated: Apr 18 2011 5:49PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 71

Frequency Range (MHz) Return Loss (dB) Insertion Loss (dB) Part Number Page
806-960 and 1710-2170 >20 <0.1 LGP213nn 73
806-960 and 1710-2170 >20 <0.1 LGP233nn 74
806-960 or 1710-1990 >25 <0.1 LGP138nn 75
698-960 and 1710-2690 >20 <0.1 LGP23302 76
POWERWAVE

TMA Products

Current Injectors
Base Station Products
Current Injectors
72

POWERWAVE Current Injectors




*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


LGP213nn Outdoor Current Injector
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698 - 960 and 1710 - 2690 (Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010)
Return Loss (dB) >20
Insertion Loss (dB) < 0.1
DC Current (Max) 1.5 A
Intermodulation 2x 43 dBm Tx Carriers dBm <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in) 87 x 41 x 51 (3.4 x 1.6 x 2.0)
Weight kg(lbs) 0.32 (0.71)
Color Off-white, NCS 1502R
Housing Aluminum
RF Connectors DIN 7/16 female and male LGP21301 ANT female, BTS male LGP21302 ANT male, BTS female
DC Supply Connector SMA female
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40to +65 (-40to +149)
MTBF >1 000 000 hours
Safety EN 609 50, UL 60950, ETL
Ingress Protection IP 68 - EN 60 529
Evironmental ETS 300 019
Lightning Protection IEC 61312-1

D031-08406 Rev. C Updated: Sep 20 2011 10:02AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 73

POWERWAVE Current Injectors




*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


LGP233nn Indoor Current Injector
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)
Return Loss (dB) >20
Insertion Loss (dB) <0.1
DC Current (Max) 1.5 A
Intermodulation 2x 43 dBm Tx Carriers dBm <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in) 87 x 41 x 51 (3.4 x 1.6 x 2.0)
Weight kg(lbs) 0.32 (0.71)
Color Silver plating
Housing Zink Alloy
RF Connectors DIN 7/16 female and male LGP23301 ANT female, BTS male LGP23302 ANT male, BTS female
DC Supply Connector SMB male
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -5to +55(23to +131)
MTBF >1 000 000 hours (over 100 years)
Safety EN 609 50, UL 609 50, ETL
Ingress Protection IP 54 - EN 605 29
Evironmental ETS 300 019
Lightning Protection IEC 61312-1

D031-08407 Rev. C Updated: Sep 20 2011 10:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 74

POWERWAVE Current Injectors




*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


LGP138nn Outdoor Current Injector
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806 - 960MHz or 1710 - 1990
Return Loss (dB) >25
Insertion Loss (dB) < 0.1
DC Current (Max) 1 A
Intermodulation 2x 43 dBm Tx Carriers dBm <-110 dBm, (<-153)
MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in) 107 x 48 x 62 (4.2 x 1.9 x 2.4)
Weight kg(lbs) 0.45 (<1)
Color Off-white, NCS 1502R
Housing Aluminum
RF Connectors DIN 7/16 or type N female and male
DC Supply Connector Screw Terminal Block
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40to +65 (-40to +149)
MTBF >1 000 000 hours
Safety EN 609 50, UL 60950, ETL
Ingress Protection IP 65 - EN 60 529
Evironmental ETS 300 019
Lightning Protection IEC 1312-1

D031-08276 Rev B Updated: Sep 14 2010 4:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 75

POWERWAVE Current Injectors




*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


LGP23302 Indoor Current Injector
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)
Return Loss (dB) >20
Insertion Loss (dB) <0.1
DC Current (Max) 1.5 A
Intermodulation 2x 43 dBm Tx Carriers dBm <-116 dBm (<-159 dBc)
MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in) 87 x 41 x 51 (3.4 x 1.6 x 2.0)
Weight kg(lbs) 0.32 (0.71)
Color Silver plating
Housing Zink Alloy
RF Connectors DIN 7/16 female and male; LGP23302 ANT male, BTS female
DC Supply Connector SMB male
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -5to +55(23to +131)
MTBF >1 000 000 hours (over 100 years)
Safety EN 609 50, UL 609 50, ETL
Ingress Protection IP 54 - EN 605 29
Evironmental ETS 300 019
Lightning Protection IEC 61312-1

D031-08407 Rev. C Updated: Sep 20 2011 10:09AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 76
Base station co-siting and new technology overlays are
growing trends around the globe and Powerwave is leading
the way with a range of same band, dual band and triple
band solutions. There are many reasons for adopting
co-siting flter solutions, including limited tower space,
zoning regulations and public opinion against new site
locations. In addition, as newer technology platforms
such as UMTS or LTE

are deployed the need for


straightforward, low loss, high performance feedline
consolidation solutions are required to allow operators to
maximize existing network CAPEX by reusing installed
cable and antenna structures.
Filter Products
Power wave
Diplexer/Crossband Combiner
Duplexers
Same Band Combiner T1
Triplexer/Crossband
Combiners
Interference Filters

Range (MHz) Insertion Loss (dB) Return Loss (db) Part Number Page
698-793 ! 0.30 dB (0.15 dB typical) " 20 dB CM1002-DPBXBC 79
698-2170 700/800 Port: 0.15 dB max. 20 dB minimum
CM1007-DBPXBC-
xxx
81
790+862 ! 0.35 dB (0.15 dB typical) " 20 dB
CM1015-DPBXBC-
xxx
83
817-869
1.0 dB maximum

14 dB minimum 010-11198-0002 85
824-894 4.2 dB maximum 18 dB minimum CM1000-AMPS-xxx 86
880-960 4.5 dB maximum 18 dB minimum
CM1001-EGSM-
xxx
87
1710-2170
0.3 dB maximum (Rx)
0.6 dB maximum (Tx)
18 dB minimum LGP145nn 88
1850-1990 0.6 dB maximum (Rx) 18 dB minimum LGP146nn 89
880-2170 0.2 dB maximum 20 dB minimum LGP141nn 90
890-960
-01: <1.5 dB (<3.5 dB 890-892 MHz)
-02: <1.0 dB (<1.8 dB 890-892 MHz)
-03: <1.5 dB (< 3.5 dB 896-898 MHz)
>18 dB LGP195nn 91
824-2170 <0.1 dB Typical 20 dB minimum LGP219nn 92

POWERWAVE

Base Station Products

Filters
Base Station Products
Filters
78

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1002-DBPXBC




Diplex Filter for LTE700 and 800 MHz with DC Auto Sense
Introduction:
The CM1002-DBPXBC is a high performance 698-793 MHz + 824-894 MHz
Crossband Combiner Diplexer intended for North America LTE700 + 850
applications. Low loss, high isolation, high power handling, low IMD and
options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF
Sniffer Port and integrated CILOC are all available.
Features:
G 60 dB Isolation, 0.30 dB maximum Insertion Loss
G Power Handling 500 watts/5 kW PEP minimum per Channel
G Low IMD -117 dBm (-160 dBc) maximum
G DC-Auto Sense DC/AISG Feedthrough Option
G Common Sniffer Port and Integrated CILOC Options
G Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Low Port, 698-793 MHz High Port, 824-894 MHz
Insertion Loss 0.30dB(0.15dBtypical) 0.30dB(0.15dBtypical)
Return Loss 20dB 20dB
Rejection 60dB@824-894 MHz 60dB@698-793 MHz
Isolation (Channel to Channel) 60dB
Average Power Handling (RMS) 500 watts (+57 dBm) max. (per channel)
Peak Power (dBm) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
Intermodulation Products (dBc) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel
DC Feedthrough Capacity TMA Supply Voltage, Fed Via RF Cable, +31VDC, 2A maximum
DC AISG Feedthru -001 (Single)/ -008 (Twin) DC/AISG Auto-Sense from low or high channels (see logic table)
DC AISG Feedthru -002 (Single)/ -009 (Twin) Option -001 + Sniffer Port -43 to -30 dB (698-793 and 824-894 MHz)
DC AISG Feedthru -003 (Single)/ -010 (Twin) Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0)
DC AISG Feedthru -004 (Single)/ -011 (Twin) All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function)
DC AISG Feedthru -005 (Single)/ -012 (Twin) All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense)
DC AISG Feedthru -006 (Single)/ -013 (Twin) Low frequency channel is hard-wired connected to common port (no DC Auto-Sense)
DC AISG Feedthru -007 (Single)/ -014 (Twin) High frequency channel is hard-wired connected to common port (no DC Auto-Sense)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 2 2011 1:37PM
D031-08697C
79

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1002-DBPXBC
DC/AISG FEEDTHROUGH/APPLICATION TABLE

MECHANICAL SPECIFICATIONS
RF Connectors DIN 7/16 female, long neck
RF Sniffer Connector N female (IP67 cap included)
AISG Connector Per IEC-60130-9 (IP67 cap included)
Dimensions, HxwxD, mm(in)
Single: 240mm x 210mm x 83mm (9.4 x
8.3 x 3.3); Twin: 240mm x 210mm x
153mm (9.4 x 8.3 x 6)
Weight, with brackets, kg(lbs) Single: 4.6 (10.1); Twin: 8.3 (18.3)
Housing Composition/Color Aluminum/Off-White (NCS 1502-R)
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS

Operating Temperature (F) -40to +65(-40to +149)
Lightning Protection
According to IEC 61312-1, 3kA 10/350
uS;center pin (any port)-shield
Ingress Protection
IP65/IP67 (IP rated cap must be used on
any unused ports)
Environmental ETS 300 019
EMC ETS 300 342-3
Safety EN60950, UL 1950, ET
DC Auto Sense Logic Table
DC/AISG Function
Table by Model
Low Port (698-793
MHz)
High Port (824-894
MHz)
AISG Port
DC/AISG
Connection
Tower Top
Capable
CM1002-DBPXBC-
001/-008
#1 Priority
Connection
#2 Priority
Connection
N/A DC Auto-
Sense&
Yes -
Common to
Low Port Only
CM1002-DBPXBC-
002/-009
#1 Priority
Connection
#2 Priority
Connection
N/A DC Auto-
Sense&
Yes -
Common to
Low Port Only
CM1002-DBPXBC-
003/-010
#2 Priority
Connection
#3 Priority
Connection
#1 Priority
Connection
DC Auto-
Sense&
No - BTS
location
only
CM1002-DBPXBC-
004/-011
No Connection No Connection N/A Hard-Wired Yes
CM1002-DBPXBC-
005/-012
Connection Connection N/A Hard-Wired Yes
CM1002-DBPXBC-
006/-013
Connection No Connection N/A Hard-Wired Yes
CM1002-DBPXBC-
007/-014
No Connection Connection N/A Hard-Wired Yes
NOTES


Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.
LowChannelS21Response
S21IsolationResponse
CommonPortS22ReturnLoss
HighChannelS21Response

RESPONSE PLOTS

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 2 2011 1:37PM
D031-08697C
80

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1007-DBPXBC-xxx




Diplex Filter for LTE700/800 MHz and AWS/PCS with DC Auto Sense
Introduction:
The CM1007-DBPXBC is a high performance 698-894 MHz + 1710-2170
MHz Crossband Combiner Diplexer intended for North America LTE700/850
+ AWS/PCS, and Global LTE800 + DCS/UMTS applications. Low loss, high
isolation, high power handling and options or either DC-Auto Sense or Hard-
Wired DC/AISG feedthrough, RF Sniffer Port and integrated CILOC are all
available
Features:
G 60 dB Isolation, 0.15 dB maximum Insertion Loss
G Power Handling 500 watts/5 kW PEP minimum per Channel
G Low IMD -115 dBm (-158 dBc) maximum
G DC-Auto Sense DC/AISG Feedthrough Option
G Common Sniffer Port and Integrated CILOC Options
G Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Low Port, 698-894 MHz High Port, 1710-2170 MHz
Insertion Loss 0.15dB(0.08dBtypical) 0.15dB(0.08dBtypical)
Return Loss 20dB 20dB
Rejection 60dB@1710-2170 MHz 60dB@698-894 MHz
Isolation (Channel to Channel) 60dB
Average Power Handling (RMS) 500 watts (+57 dBm) max. (per channel)
Peak Power (dBm) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
Intermodulation Products (dBc) 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel)
DC Feedthrough Capacity TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max.
DC Bias/AISG Auto-Sense (-001 Option) DC/AISG Auto-Sense from low or high channels (see logic table below)
Antenna Sniffer Port (-002 Option) Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz)
AISG Port & Integrated CILOC (-003 Option) Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible)
DC/AISG Feedthru Delete (-004 Option) All ports are DC and AISG isolated from each other (no Auto-Sense function)
DC/AISG Common All Ports (-005 Option) All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function)
DC/AISG Low to Common Port (-006 Option) Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)
DC/AISG High to Common Port (-007 Option) High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 2 2011 1:40PM
D031-08690B
81

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1007-DBPXBC-xxx
DC/AISG FEEDTHROUGH/APPLICATION TABLE

MECHANICAL SPECIFICATIONS
RF Connectors DIN 7/16 female, long neck
RF Sniffer Connector N female (IP67 cap included)
AISG Connector Per IEC-60130-9 (IP67 cap included)
Dimensions, HxwxD, mm(in)
125 x 227.5 x 83 (4.92 x 8.96 x 3.27),
excluding connectors and bracket
Weight, with brackets, kg(lbs) 3.0 (6.5)
Housing Composition/Color Aluminum/Off-White (NCS 1502-R)
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS

Operating Temperature (F) -40to +65(-40to +149)
Lightning Protection IEC 61312-1, 3 kA 10/350 s, 8 kA 8/20 s
Ingress Protection
IP67 (IP67 rated cap must be used on any
unused ports)
Environmental ETS 300 019
EMC ETS 300 342-3
Safety EN60950, UL 1950, ET
DC Auto Sense Logic Table
DC/AISG Feedthru
Low Port
(698-894 MHz)
High Port
(1710-2170 MHz)
AISG Port
DC/AISG
Connection
Tower Top
Capable
CM1007-DBPXBC-001
#2 Priority
Connection
#1 Priority
Connection
N/A
DC Auto-
Sense&
Yes - Common to
High Port Only
CM1007-DBPXBC-002
#2 Priority
Connection
#1 Priority
Connection
N/A
DC Auto-
Sense&
Yes - Common to
High Port Only
CM1007-DBPXBC-003
#3 Priority
Connection
#2 Priority
Connection
#1 Priority
Connection
DC Auto-
Sense&
No - BTS location
only
CM1007-DBPXBC-004 No Connection No Connection N/A Hard-Wired Yes
CM1007-DBPXBC-005 Connection Connection N/A Hard-Wired Yes
CM1007-DBPXBC-006 Connection No Connection N/A Hard-Wired Yes
CM1007-DBPXBC-007 No Connection Connection N/A Hard-Wired Yes
NOTES


LowChannelS21Response
HighChannelS21Response
S21IsolationResponse(inhigh
band)
S21 Isolation Response (in low
band)
Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.
RESPONSE PLOTS

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 2 2011 1:40PM
D031-08690B
82

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1015-DBPXBC-xxx




Diplex Filter for LTE800 and GSM900 with DC Auto Sense
Introduction:
The CM1015-DBPXBC is a high performance 790-862 MHz + 880-960 MHz
Crossband Combiner Diplexer intended for European LTE800 + E-GSM900
applications. Low loss, high isolation, high power handling, low IMD and
options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF
Sniffer Port and integrated CILOC are all available.
Features:
G 50 dB Isolation, 0.35 dB maximum Insertion Loss
G Power Handling 300 watts/3 kW PEP minimum per Channel
G Low IMD -117 dBm (-160 dBc) maximum
G DC-Auto Sense DC/AISG Feedthrough Option
G Common Sniffer Port and Integrated CILOC Options
G Hard Wired DC/AISG Feedthrough Options
ELECTRICAL SPECIFICATIONS
Frequency Range (MHz) Low Port, 790-862MHz High Port, 880-960 MHz
Insertion Loss 0.35dB(0.15dBtypical) 0.35dB(0.15dBtypical)
Return Loss 20dB 20dB
Rejection 50dB@880-960 MHz 50dB@790-862 MHz
Isolation (Channel to Channel) 50dB
Average Power Handling (RMS) 300 watts (+54) max.
Peak Power (dBm) 3 kW (+64 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
Intermodulation Products (dBc) -117 dBm (-160) in Rx band, two/+43 dBm carriers in the Tx band
DC Feedthrough Capacity TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max.
DC AISG Feedthru -001 (Single)/ -008 (Twin) DC/AISG Auto-Sense from low or high channels (see logic table)
DC AISG Feedthru -002 (Single)/ -009 (Twin) Option -001 + Sniffer Port -43 to -30 dB (790-862 and 880-960 MHz)
DC AISG Feedthru -003 (Single)/ -010 (Twin) Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0)
DC AISG Feedthru -004 (Single)/ -011 (Twin) All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function)
DC AISG Feedthru -005 (Single)/ -012 (Twin) All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense)
DC AISG Feedthru -006 (Single)/ -013 (Twin) Low frequency channel is hard-wired connected to common port (no DC Auto-Sense)
DC AISG Feedthru -007 (Single)/ -014 (Twin) High frequency channel is hard-wired connected to common port (no DC Auto-Sense)
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Nov 2 2011 1:43PM
D031-08785B
83

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Filters
CM1015-DBPXBC-xxx
DC/AISG FEEDTHROUGH/APPLICATION TABLE

MECHANICAL SPECIFICATIONS
RF Connectors DIN 7/16 female, long neck
RF Sniffer Connector N female (IP67 cap included)
AISG Connector Per IEC-60130-9 (IP67 cap included)
Dimensions, HxwxD, mm(in)
Single: 240mm x 210mm x 83mm (9.4 x
8.3 x 3.3); Twin: 240mm x 210mm x
153mm (9.4 x 8.3 x 6)
Weight, with brackets, kg(lbs) Single: 4.6 (10.1); Twin: 8.3 (18.3)
Housing Composition/Color Aluminum/Off-White (NCS 1502-R)
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS

Operating Temperature (F) -40to +65(-40to +149)
Lightning Protection
According to IEC 61312-1, 8 kA 8/20
uS;center pin (any port)-shield
Ingress Protection
IP65/IP67 (IP rated cap must be used on
any unused ports)
Environmental ETS 300 019
EMC ETS 300 342-3
Safety EN60950, UL 1950, ET
DC Auto Sense Logic Table
DC/AISG Function
Table by Model
Low Port (790-862
MHz)
High Port (880-960
MHz)
AISG Port
DC/AISG
Connection
Tower Top
Capable
CM1015-DBPXBC-
xxx-001/-008
#1 Priority
Connection
#2 Priority
Connection
N/A DC Auto-
Sense&
Yes -
Common to
Low Port Only
CM1015-DBPXBC-
xxx-002/-009
#1 Priority
Connection
#2 Priority
Connection
N/A DC Auto-
Sense&
Yes -
Common to
Low Port Only
CM1015-DBPXBC-
xxx-003/-010
#2 Priority
Connection
#3 Priority
Connection
#1 Priority
Connection
DC Auto-
Sense&
No - BTS
location
only
CM1015-DBPXBC-
xxx-004/-011
No Connection No Connection N/A Hard-Wired Yes
CM1015-DBPXBC-
xxx-005/-012
Connection Connection N/A Hard-Wired Yes
CM1015-DBPXBC-
xxx-006/-013
Connection No Connection N/A Hard-Wired Yes
CM1015-DBPXBC-
xxx-007/-014
No Connection Connection N/A Hard-Wired Yes
NOTES


Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.
LowChannelS21Response
S21IsolationResponse
CommonPortS22ReturnLoss
HighChannelS21Response

RESPONSE PLOTS

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Nov 2 2011 1:43PM
D031-08785B
84

POWERWAVE Filters

010-11198-0002 850 MHz Rebanding Duplexer
ELECTRICAL SPECIFICATIONS*
Filter Type 850 MHz Rebanding Duplexer
Frequency Range 817-869
Antenna to Receive (RX) Port:
Passband 817-824
Passband Insertion Loss 1.0 dB maximum
Passband Loss Flatness +/- 0.5 dB
Passband Return Loss 14 dB minimum
Rejection
DC - 650 MHz 70 dB minimum
650 - 680 MHz 85 dB minimum
680 - 750 MHz 70 dB minimum
780 - 790 MHz 40 dB minimum
862 - 869 MHz 80 dB minimum
869 - 2700 MHz 40 dB minimum

Transmit (Tx) to Antenna Port:
Passband 862-869
Passband Insertion Loss 1.6 dB maximum
Passband Loss Flatness +/- 0.5 dB
Passband Return Loss 14 dB minimum
Rejection:
DC - 806 MHz 80 dB minimum
806 - 824 MHz 70 dB minimum
824 - 861.35 MHz 50 dB minimum
&861.50 MHz 30 dB minimum
&861.65 MHz 10 dB minimum
920 - 2700 40 dB minimum

Input Power Handling:
Average 100 watts minimum
Peak Instantaneous 11,000 watts minimum
MECHANICAL SPECIFICATIONS
Dimensions mm(in) 389.2 x 212 x 135 max (not inc. connectors or mtg brackets)
Weight lb(kg) 25.4 (11.52) maximum
CONNECTORS
Antenna N-F
Transmit N-F
Receive SMA-F
Grounding Stud Stainless M10x1.5 and hex nut for complete performance data
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range (Celsius) 0C to +50C
Operating Humidity 10-100%, non-condensing
Operating Altitude Sea Level to 7500 feet (or equal barometric pressure)

D031-08639A Updated: Jan 5 2010 5:45PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 85

POWERWAVE Filters


CM1000-AMPS-xxx 850 MHz Same Band Combiner, Type 1
TECHNICAL SPECIFICATIONS*
Filter Type 850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1
Range (MHz) 824-894
Frequency Range (Full Band MHz) Uplink, 824-849 Downlink, 869-894
Insertion Loss (dB) 4.2 dB maximum 0.6 dB maximum
Return Loss (dB) 18 dB minimum 18 dB minimum
Average Power Handling (dBm) N/A 200 watts (+53.0)
Peak Power Handling (dBm) N/A
1200 watts (+60.8) PEP maximum at 3000m, +65C and
2:1 antenna mismatch
Intermodulation (IM) (dBc) (Products Max) -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
Isolation Between Ports Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum
Common Port TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1
AISG Mode Per AISG 1.1, 2.0
AISG Control Signal Loss 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz
Voltage Drop with 15W Power 1 V maximum @ 10-30VDC
Supply Voltage Handling 0-35VDC
Continuous Current Handling 5 A, 0-35VDC
DC Load 100 mA, +/-20 mA at GSM BTS Ports
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors
Weight kg(lbs) 8.15 (18)
Color Off White (NCS 1502-R)
Housing Aluminum, IP 67
RF Connectors DIN 7/16 female
Mounting Kit - Rack Mount 19 Rack Mount Brackets (order P/N CM1000-AMPS-001)
Mounting Kit - Tower Mounting Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40C to +65C (-40to +149)
MTBF 1 Million Hours
Surge Protection IEC 61312-1
Safety EN 60950, UL 60950
Ingress Protection IP67
Evironmental ETS 300 019
EMC 3GPP: TS 25.113
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to
optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be
used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the
same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX
diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path
from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.
Typical Application - GSM & UMTS Combining

Tower Mounting Brackets Option Shown

Block Diagram - Type 1 Same Band
Combiner

D031-08700B Updated: Mar 23 2010 7:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 86 86

POWERWAVE Filters


CM1001-EGSM-xxx GSM900 Same Band Combiner, Type 1
TECHNICAL SPECIFICATIONS*
Filter Type GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1
Range (MHz) 880-960
Frequency Range (Full Band MHz) Uplink, 880-915 Downlink, 925-960
Insertion Loss (dB) 4.5 dB maximum 0.6 dB maximum
Return Loss (dB) 18 dB minimum 18 dB minimum
Average Power Handling (dBm) N/A 200 watts (+53.0)
Peak Power Handling (dBm) N/A
1200 watts (+60.8) PEP maximum at 3000m, +65C and
2:1 antenna mismatch
Intermodulation (IM) (dBc) (Products Max) -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
Isolation Between Ports Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum
Common Port TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1
AISG Mode Per AISG 1.1, 2.0
AISG Control Signal Loss 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz
Voltage Drop with 15W Power 1 V maximum @ 10-30VDC
Supply Voltage Handling 0-35VDC
Continuous Current Handling 5 A, 0-35VDC
DC Load 100 mA, +/-20 mA at GSM BTS Ports
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors
Weight kg(lbs) 8.15 (18)
Color Off White (NCS 1502-R)
Housing Aluminum, IP 67
RF Connectors DIN 7/16 female
Mounting Kit - Rack Mount 19 Rack Mount Brackets (order P/N CM1001-EGSM-001)
Mounting Kit - Tower Mounting Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002)
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40C to +65C (-40to +149)
MTBF 1 Million Hours
Surge Protection IEC 61312-1
Safety EN 60950, UL 60950
Ingress Protection IP67
Evironmental ETS 300 019
EMC 3GPP: TS 25.113
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to
optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be
used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the
same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX
diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path
from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.
Typical Application - GSM & UMTS Combining

Tower Mounting Brackets Option Shown

Block Diagram - Type 1 Same Band
Combiner

D031-08701B Updated: Mar 23 2010 7:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 87 87

POWERWAVE Filters






LGP145nn Diplex Filter for 1800/UMTS with Configurable DC
Transparency
TECHNICAL SPECIFICATIONS
Filter Type Diplexer for 1800/2100
Range (MHz) 1710-2170
Frequency Range (Full Band MHz) 1710-1880 MHz/1920-2170
Frequency Range (MHz) 1800 Port, 1710-1880 UMTS Port, 1920-2170
Insertion Loss (dB) 0.3 dB maximum (Rx), 0.6 dB maximum (Tx) 0.5 dB maximum (Rx), 0.3 dB maximum (Tx)
Return Loss (dB) 18 dB minimum 18 dB minimum
Rejection 74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170 MHz 60 dB min. 1710-1880 MHz
Average Power Handling (dBm) 240 watts (+53.8) minimum 80 watts (+49) minimum
Peak Power (dBm) 1440 watts (+61) minimum 1600 watts (+62) minimum
Intermodulation (IM)(dBc)(Products, Max) -118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band
Common+Port TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A
DC Bias/AISG Passthru (single):
-01: DC/AISG to issue 2.0
(UMTS Port to Antenna Port)
-02: DC/AISG to issue 2.0
(1800 Port to Antenna Port)
-03: DC/AISG to issue 2.0
(connected all ports)
-04: No Connection
(DC Grounded)
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 180 x 162 x 61 (7x 6x 2)
Weight kg(lbs) 3.6 (7.9)
Volume N/A
Color Off White (NCS 1502-R)
Housing Aluminum
RF Connectors DIN 7/16 female
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40to +65(-40to +149)
MTBF 10 Million Hours
Lightning Protection
3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shield-shield (Pulse forms per
IEC61312-1)
Safety EN60 950
Ingress Protection IP65, EN 60 529
Environmental ETS 300 019
EMC N/A

D031-08227A Updated: Mar 18 2010 11:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 88

POWERWAVE Filters






LGP146nn 1900 MHz Duplex filter Outdoor with DC Bypass
TECHNICAL SPECIFICATIONS
Filter Type Duplex Filter 1900
Range (MHz) 1850-1990
Frequency Range (Full Band MHz) 1850-1910 MHz/1930-1990 MHz
Frequency Range (MHz) RECEIVE,1850-1910 TRANSMIT, 1930-1990
Insertion Loss (dB) 0.6 dB maximum (Rx) 0.5 dB maximum (Tx)
Return Loss (dB) 18 dB minimum 18 dB minumum
Rejection 40 dB minimum; 1930-1990 MHz 40 dB minimum; 1850-1910 MHz
Average Power Handling (dBm) N/A 200 watts (+53) minimum
Peak Power (dBm) N/A TRANSMIT, 1000W (+60 dBm) minimum
Intermodulation (IM)(dBc)(Products, Max) -110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band
Common+Port TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A
DC Bias/AISG Passthru (single):
-01: DC/AISG to issue 2.0 (Rx
Port to Antenna Port)
N/A N/A N/A
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 163 x 181 x 65 (6x 7x 3)
Weight kg(lbs) 3.3 (7.3) maximum
Volume N/A
Color Off White (NCS 1502-R)
Housing Aluminum
RF Connectors DIN 7/16 female
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40to +65(-40to +149)
MTBF 10 Million Hours
Lightning Protection IEC 61312-1
Safety EN 60 950, UL 1950
Ingress Protection IP65, EN 60 529
Environmental ETS 300 019
EMC N/A

D031-08691A Updated: Jan 5 2010 5:45PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 89

POWERWAVE Filters


LGP141nn Triplex Filter for 900, 1800 MHz and UMTS with DC
Transparency
TECHNICAL SPECIFICATIONS
Range (MHz) 880-2170
Frequency Range (Full Band MHz) 900 Port, 880-960 1800 Port, 1710-1880 UMTS Port, 1920-2170
Peak Power (dBm) 1600 W (+62) PEP 1600 W (+62) PEP 1600 W (+62) PEP
Insertion Loss (dB) 0.1 dB typical (0.2 dB max.)
0.1 dB typical (0.3 dB max.
Rx, 0.6 dB max. Tx)
0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx)
Return Loss (dB) 20 dB minimum 20 dB minimum 20 dB minimum
Average Power Handling (dBm) 350 W (+55) max. 350 W (+55) max. 350 W (+55) max.
Intermodulation (IM) (dBc) (Products, Max)
3rd Order: -100 dBm; 5th
Order: -116 dBm (Rx band
products w/2x43 dBm in Tx
band)
3rd Order: -100 dBm; 5th
Order: -116 dBm (Rx band
products w/2x43 dBm in Tx
band)
-116 dBm (Rx band products w/2x43 dBm in Tx band)
Isolation Between Ports Rejection Between Ports (except common), >50 dB
Coupled Ports N/A
Common+Port TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A
DC Bias/AISG Passthru -06 (single) -06: No Connection (DC Grounded)
DC Bias/AISG Passthru -07 (single) -07: DC/AISG to issue 2.0 (connected all ports)
DC Bias/AISG Passthru -08 (single) -08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)
DC Bias/AISG Passthru -09 (single) -09: DC/AISG to issue 2.0 (connected to UMTS port)
DC Bias/AISG Passthru -10 (single) -10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)
DC Bias/AISG Passthru -11 (twin) -11: No Connection (DC Grounded)
DC Bias/AISG Passthru -12 (twin) -12: DC/AISG to issue 2.0 (connected all ports)
DC Bias/AISG Passthru -13 (twin) -13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)
DC Bias/AISG Passthru -14 (twin) -14: DC/AISG to issue 2.0 (connected to UMTS port)
DC Bias/AISG Passthru -15 (twin) -15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)
MECHANICAL SPECIFICATIONS
Dimensions mm(in) 169 x 228 x 69.7 (6.65x 8.98x 2.75)
Weight kg(lbs) <3.0 (6.5)
Color Off White (NCS 1502-R)
Housing Aluminum, IP 65 (Optional IP 68)
RF Connectors DIN 7/16 female
Coupled Port Connector N/A
AISG Connector N/A
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) -40C to +65C (-40to +149)
MTBF 4 Million Hours
Safety EN 60 950, UL 60 950, ETL
Ingress Protection IP65, EN 60 529
Environmental ETS 300 019

D031-08652D Updated: Oct 10 2011 8:43AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 90

POWERWAVE Filters




*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


LGP195nn Co-Location Filter GSM900
TECHNICAL SPECIFICATIONS*
Filter Type Co-Location Filter GSM900
Frequency Range (MHz) 890-960
Rx Passband Frequency Range (MHz) -01: 890-915 MHz -02: 890-915 MHz -03: 896-915 MHz
Tx Passband Frequency Range (MHz) -01: 935-960 MHz -02: 935-960 MHz -03: 941-960 MHz
Rx Passband Insertion Loss -01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)
Tx Passband Insertion Loss < 0.5 dB
Passband Return Loss Uplink:17dBDownlink:18dB
Rejection -01: > 30 dB 869 to 889 MHz -02: > 37 dB 869 to 888 MHz -03: > 30 dB 869 to 895 MHz
Passband Power Handling (dBm) 200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)
Passband Peak Power Handling 1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)
Intermodulation IM dBc Products Max -110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 169 x 228 x 68 (7x 9x 2)
Weight kg(lbs) 3.8 (8.4) maximum
Color Off White (NCS 1502-R)
Housing Aluminum, Powder Coated
RF Connectors DIN 7/16 female
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -5to +55(23to +131)
Operating Humidity Range 0 to +95% Relative Humidity
MTBF >10 Million Hours
Ingress Protection IP65

D031-08692B Updated: Oct 24 2011 10:52AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 91

POWERWAVE Filters





LGP219nn Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with
Configurable DC Transparency
TECHNICAL SPECIFICATIONS
Filter Type Diplex Filter for 800/900 MHz and 1800/1900/2100
Range (MHz) 824-2170
Frequency Range (Full Band MHz) 824-960 MHz/1710-2170 MHz
Frequency Range (MHz) 824-960 Port, 824-960 MHz 1710-2100 Port, 1710-2170 MHz
Insertion Loss (dB) <0.1 dB Typical <0.2 dB Typical
Return Loss (dB) 20 dB minimum 20 dB minimum
Rejection 50 dB minimum; 1710-2170 MHz 50 dB minimum; 824-960 MHz
Average Power Handling (dBm)
850 MHz: 500 watts (+57); 900 MHz: 350 watts
(+55) max.
350 watts (+55) max.
Peak Power (dBm)
850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5)
PEP
DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP
Intermodulation (IM)(dBc)(Products, Max) -110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band
Common+Port TMA supply voltage, fed via the RF cable, +/-31 V maximum, 2 A
DC Bias/AISG Passthru (single): -01: No Connection
(DC Grounded)
-02: DC/AISG to issue 2.0
(connected all ports)
-03: DC/AISG to issue 2.0
(1710-2100 Port to Antenna
Port)
-04: DC/AISG to issue 2.0
(824-960 Port to Antenna
Port)
DC Bias/AISG Passthru (twin): -05: No Connection
(DC Grounded)
-06: DC/AISG to issue 2.0
(connected all ports)
-07: DC/AISG to issue 2.0
(1710-2100 Port to Antenna
Port)
-08: DC/AISG to issue 2.0
(824-960 Port to Antenna
Port)
MECHANICAL SPECIFICATIONS*
Dimensions mm(in) 112 x 158 x 74 (4x 6x 3)
Weight kg(lbs) 2.5 (5.5) maximum
Volume 1.3 liter single unit
Color Off White (NCS 1502-R)
Housing Aluminum
RF Connectors DIN 7/16 female
Mounting Kit Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit) -40to +65(-40to +149)
MTBF 5 Million Hours
Lightning Protection According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield
Safety EN 60 950, UL 1950, ETL
Ingress Protection IP65, EN 60 529
Environmental ETS 300 019
EMC ETS 300 342-3

D031-08693C Updated: Oct 10 2011 8:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 92
Powerwaves innovative outdoor enclosure and mobile
platform solutions offer fexible combinations of density and
serviceability through state of the art modular design and
construction. Network operators around the world have
made Powerwaves enclosure and mobile platforms their
premier choice for housing and deploying critical network
infrastructure equipment.
Rapid Mobile Deployment
and Enclosure Solutions
Power wave
MicroFlex

Outdoor
Enclosures
RapidFlex

Outdoor
Enclosures
SubTerra

Controlled
Environment Vault
VersaFlex

Shelter
Solutions

POWERWAVE

Page
MicroFlex Outdoor Enclosures 95
RapidFlex Mobile Deployment Unit 98
SubTerra Controlled Environment Vault 100
VersaFlex Shelter Solutions 102
RMDU and Enclosure Solutions
Rapid Mobile Deployment and Enclosure Solutions
94

Title Part Number Page

MicroFlex Low-Profile Enclosure for
Backhaul and E911 Applications
MF0-004-000-002 96
MicroFlex 48RU Outdoor Enclosure MF0-048-000-001 97
POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

MicroFlex Outdoor Enclosures
RMDU and Enclosures Solutions
MicroFlex Outdoor Enclosures
95

POWERWAVE Electronic Equipment Enclosures
Powerwaves Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order
with interchangeable options and accessories.


MF0-004-000-002 MicroFlex Low-Profile Enclosure for Backhaul and E911
Applications
GENERAL SPECIFICATIONS
Material High Strength High Strength Corrosion Resistant Aluminum Construction
Finish TGIC Powdercoat, Color RAL 7035
WEIGHTS & MEASURES
Dimensions mm(in) 914 x 685 x 254 (36 x 27 x 10)
Weight kg(lbs) 40 (88) (baseline configuration)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature -10C to 50C
Wind m/s(mph) 67 (150)
Audible Noise (db-A) 57.0 (not including installed equipment)
Thermal Electric Cooling Power 200W (calculated 190W @ dT = 0 degree C +/- 10%)
COMPLIANCE
GR487 CORE
UL50
CE
RoHS
IP55

Updated: Jul 21 2010 11:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 96

POWERWAVE Electronic Equipment Enclosures
Powerwaves Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order
with interchangeable options and accessories.


MF0-048-000-001 MicroFlex 48RU Outdoor Enclosure
GENERAL SPECIFICATIONS
Material High Strength High Strength Corrosion Resistant Aluminum Construction
Finish TGIC Powdercoat, Color RAL 7035
WEIGHTS & MEASURES
Dimensions mm(in) 2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D)
Weight kg(lbs) 436 kg ( 961lbs) (Cabinet only, no equipment)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-50C to 70C (Internal temperature is dependant on equipment heat load and thermal management
options)
Wind m/s(mph) 67 (150)
Audible Noise (db-A) 57.0 to 65 (depending on thermal management)
COMPLIANCE
GR487 CORE (Pending)
UL50
CE
RoHS
IP55

Updated: Nov 1 2011 5:28PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 97

Title Part Number Page

RapidFlex Mobile Deployment Unit

CW0-000-000-003 99
POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

RapidFlex Mobile Deployment Unit
RapidFlex Mobile Deployment Unit
RMDU and Enclosures Solutions
98

POWERWAVE RapidFlex
*All dimensions are nominal and specifications are subject to change without notice.

CW0-000-000-003 RapidFlex Mobile Deployment Unit (RMDU)
GENERAL SPECIFICATIONS
Axle: Quantity Dual Tandem HD
Axle: Type Straight
Brakes Electric
Suspension Leaf
Wheel Bolt Pattern
Safety Chains Yes
12V Trailer End Connector 7-Way
Coax Real Up to (12) 1/2 Coax or (6) 7/8 Coax + 1 flexible conduit
Diesel Generator, Weather Proof Sound Attenuated
Enclosure
50kW Diesel with extended run time fuel tank
7-Bay Telecommunications Shelter Yes
Hydraulic Auto Leveling Yes
Micro Footprint, Hydraulic Powered Outriggers Yes
WEIGHTS & MEASURES
Trailor Width 76
Trailor Length 34
Travel Length 36
Overall Width 76
Overall Height 13 6
Platform Height 24
Tire Size/Type 235-75R17.5
Hitch Ball Size Gooseneck 2 5/16
Hitch Weight (lbs) 3,000
Curb Weight (lbs) 22,000
GVWR (lbs) 30,000
GAWR (lbs) 15,000
Average Payload Capacity (lbs) 8,000
Tower Height (ft) 102 Rad Center
Maximum Tower Loading (lbs) 650
ACCESSORIES INCLUDED
Full-size spare tire
Safety pull-away chains
Sealed beam DOT lighting package and reflective
striping (complies w/ DOT Federal Motor Carrier
safety regulations in all 50 states)
7-way electrical hook-up
Operation and maintenance manuals
Lockable tool box
Automatic Transfer Switch
Extended Run Double Wall Fuel Tank
3-way antenna mount
Wireless Platform Access and Control
ADDITIONAL OPTIONS AVAILABLE
FAA aviation obstruction lighting kit
Wind Speed Anemometer
Self-Guy Kit

Updated: Nov 7 2011 5:39PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 99

Title Part Number Page
SubTerra Controlled Environment Vault CEV-000-000-001 101
POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

SubTerra Controlled Environment Vault
SubTerra Controlled Environment Vault
RMDU and Enclosures Solutions
100

POWERWAVE Electronic Equipment Enclosures
Powerwaves Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with
interchangeable options and accessories.


CEV-000-000-001 SubTerra Controlled Environment Vault
GENERAL SPECIFICATIONS
Material High Strength Fiberglass and High Strength Corrosion Resistant Aluminum Construction
Finish Brushed Aluminum
WEIGHTS & MEASURES
Dimensions mm(in) 3860 x 1955 x 3505 (152 x 77 x 138)
Weight kg(lbs) 3401 (7500) (baseline configuration)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-40C to 60C (Internal temperature is dependant on equipment heat load and thermal management
options)
Wind m/s(mph) 67 (150)
Audible Noise (db-A) 57.0 to 65 (depending on thermal management options)
COMPLIANCE
Designed to GR487 CORE
UL Listed
CE
RoHS
Designed to IP55

Updated: Dec 9 2010 2:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 101

Title Dimensions (ft) Weight (lbs) Page
VersaFlex 7.0 High-Cube Outdoor Shelter 2591 x 3048 x 2286 mm (102 x 120 x 90) 1590 (3500) 103
VersaFlex 9.0 High-Cube Outdoor Shelter 2591 x 4191 x 2286 mm (102 x 165 x 90) 1814 (4000) 104
POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

VersaFlex Shelter Solutions
VersaFlex Shelter Solutions
RMDU and Enclosures Solutions
102

POWERWAVE VersaFlex
Note: Weights and lengths are approximate measurements and will vary based on customer requirements.
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.




VersaFlex (7 Bay) VersaFlex Enclosure Solutions
SPECIFICATIONS
Length ft(m) 10 (3.05)
Width ft(m) 76 (2.29)
Height in(m) 86: (2.59)
Weight lbs(kg) 4000 (1814)
HVAC 2x3 Ton
Radio Frames 7
Minimum Lease Required 10L x 76W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)
VersaFlex (7 Bay) Enclosure
Key Features/Benefits:
I Utilizes approximately half the space of
traditional Shelters.
I Standard weighs only 4,000 lbs (1814 kg) vs.
the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.
I Internal sub-floor HVAC system that
eliminates hot spots.
I Sliding door design reduces lease area
requirements by eliminating door swing.
I Sliding equipment racks that reduce floor
space required and utilizes a rolling cable
tray

D031-08439 Rev. D 07/08 Updated: Jul 21 2010


6:12PM
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 103

POWERWAVE VersaFlex
Note: Weights and lengths are approximate measurements and will vary based on customer requirements.
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.




VersaFlex (9 Bay) VersaFlex Enclosure Solutions
SPECIFICATIONS
Length ft(m) 139 (4.19)
Width ft(m) 76 (2.29)
Height in(m) 86: (2.59)
Weight lbs(kg) 4750 (2155)
HVAC 2x5 Ton
Radio Frames 9
Minimum Lease Required 139L x 76W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)
VersaFlex (9 Bay) Enclosure
Key Features/Benefits:
I Utilizes approximately half the space of
traditional Shelters.
I Standard weighs only 4,000 lbs (1814 kg) vs.
the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.
I Internal sub-floor HVAC system that
eliminates hot spots.
I Sliding door design reduces lease area
requirements by eliminating door swing.
I Sliding equipment racks that reduce floor
space required and utilizes a rolling cable
tray

D031-08439 Rev. D 07/08 Updated: Jul 21 2010


6:12PM
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 104
Repeater Products
In-Building and Outdoor
DAS Products
Repeater Remote
Management Products
Powerwaves Coverage products include turn- key
coverage and capacity products and solutions that give
network operators, facilities owners and neutral hosts an
edge over the competition. We specialize in innovative
products and solutions from the simplest to the most
challenging indoor and outdoor environments that help
improve coverage, signal quality and capacity. Our effcient,
modular and integrated solutions drive down capital and
operating expenses.
Coverage Products
Power wave
105

POWERWAVE

Repeater Products Page
Channel Selective Standard Repeaters 108
Band Selective Compact Repeaters 138
Band Selective Standard Repeaters 170
Advanced Train Repeaters 185
Digital Repeaters 190

In-Building and Outdoor DAS Products, Repeater Products Page
Bi-Directional Amplifiers 203
Fiber Optic DAS Master Unit 206
LinkNet Convergence Platform 208
Tap-In Signal Taps 216
Nexus FT - Public Safety 218

In-Building and Outdoor DAS Products, DAS Products Page
Wide Band Radio Heads 220
Nexus FT Single and Dual Band 223
Nexus FT Rack Mounts 259

Repeater Remote Management Page
Base Station Management Interface 265
IP/SNMP/GPS Repeater Remote Management Interface 267
Coverage Products
Coverage Products
106
Repeater products provide cost-effective coverage solutions
for airports, railway stations, tunnels, convention centers,
canyons and other environments where structures or
natural obstructions interfere with signals. What sets
Powerwave repeater products apart is our exceptionally
low total lifetime cost. This is due to a number of factors.
Our high level of integration delivers a compact form factor
that eliminates/minimizes site rental costs. With support
for 2G/3G/4G technologies, Powerwave provides a future-
proof solution.
Channel Selective
Standard Repeaters
Band Selective
Compact Repeaters
Band Selective
Standard Repeaters
Advanced Train Repeaters
Digital Repeaters
Repeater Products
Power wave

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth Part Number Page
Upgrade Standard
Channel Selective,1800
MHz
GSM 4 200 KHz/channel AR0027/50409 110
Upgrade Standard
Channel Selective,2100
MHz
GSM 2 200 KHz/channel AR0065/00109 111
Standard Channel
Selective Repeater
900MHz
GSM-R 2 200 KHz/channel AR1700/80208 112
Standard Channel
Selective Repeater
900MHz
GSM-R 2 200 KHz/channel AR1700/80209 113
Standard Channel
Selective Repeater
900MHz
GSM-R 2 200 KHz/channel AR1700/80218 114
Standard Channel
Selective Repeater
900MHz
GSM-R 2 200 KHz/channel AR1700/80219 115
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80229 116
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80408 117
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80409 118
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80418 119
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80419 120
Standard Channel
Selective Repeater
900MHz
GSM-R 4 200 KHz/channel AR1700/80429 121
Standard Channel
Selective Repeater
900MHz
EGSM 2 200 KHz/channel AR1700/90209 122
Standard Channel
Selective Repeater
900MHz
EGSM 4 200 KHz/channel AR1700/90409 123
Coverage Products
Channel Selective Standard Repeaters
108

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth Part Number Page
Standard Channel
Selective, 900 MHz
EGSM 4 200 KHz/channel AR1700/90419 124
Standard Channel
Selective, 900 MHz
GSM 6 200 KHz/channel AR1717/90609 125
Standard Channel
Selective, 1800 MHz
GSM 2 200 KHz/channel AR2700/50209 126
Standard Channel
Selective, 1800 MHz
GSM 4 200 KHz/channel AR2700/50409 127
Standard Channel
Selective, 1800 MHz
GSM 6 200 KHz/channel AR2727/50609 128
Standard Channel
Selective, 1900 MHz
GSM 4 200 KHz/channel AR3700/50409 129
Standard Channel
Selective, 2100 MHz
WCDMA 2 4.4 MHz/channel AR6500/00109 130
Standard Repeater
Dual Band Channel
Selective, 2100MHz
WCDMA2100 2 4.4 MHz/channel AR6512/00229 131
Standard Dual Band
Channel Selective,
2100MHz
WCDMA2100 2 4.4 MHz/channel AR6512/00239 132
Standard Dual Band
Channel Selective,
2100MHz
WCDMA2100 2 4.4 MHz/channel AR6517/01429 133
Standard Channel
Selective, 2100 MHz
WCDMA2100 2 200 KHz/channel AR6517/01439 134
Standard Channel
Selective, 2100 MHz
WCDMA2100 2 200 KHz/channel AR6517/01459 135
Dual Band Channel
Selective 2100/1800
WCDMA2100 1 to 2 4.4 MHz/channel AR6522/01109 136
Standard Channel
Selective, 2100 MHz
WCDMA2100 2 4.4 MHz/channel AR6560/00209 137

Coverage Products
Channel Selective Standard Repeaters
109

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR0027/50409 Upgrade Standard Repeater Channel Selective 1800MHz GSM,
4CH, Stand Alone, Seperated Donor/Service
ELECTRICAL DATA*
Section Bottom Section Door Section
Range N/A GSM1800
Frequency Band UL (MHz) N/A 1710-1785
Frequency Band DL (MHz) N/A 1805-1880
No. of Channels N/A 4
Bandwidth (MHz) N/A 200 KHz/channel
Output Power DL N/A +28 dBm/channel
Output Power UL N/A +28 dBm/channel
Gain adjustment range N/A 55 to 90 dB
Noise Figure N/A 4 dB
Group Delay N/A 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply N/A 115/230 VAC
Power Supply (Optional) N/A N/A
Power Consumption N/A 250 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type N/A N/A
Wireless MOD EM Frequencies N/A N/A
Packet Data Mode N/A N/A
Fallback Circuit Switched Mode N/A N/A
Northbound Traffic N/A N/A
Maintenance N/A N/A
Remote Management N/A N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N/A N-female
Dimension (HxWxD)mm(ft) N/A 440 x 530 x 195 (15x19x8)
Weight kg(lbs) N/A 22 (48)
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) N/A -13 to +131 (-25 to +55)
Housing Specification N/A NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio N/A TS 45.005
Regulatory Compliance EMC N/A EN 301 489-1
*Stand alone Notes:

Updated: Dec 8 2010 2:15PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 110

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR0065/00109 UPGRADE STANDARD REPEATER CHANNEL SELECTIVE
2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR
AND SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range N/A WCDMA 2100
Frequency Band UL (MHz) N/A 1920 -1980
Frequency Band DL (MHz) N/A 2110 - 2170
No. of Channels N/A 2
Bandwidth (MHz) N/A 4.4 channel
Output Power DL N/A 1ch +30 dBm/channel, 2ch +25 dBm/channel
Output Power UL N/A 1ch +20 dBm/channel, 2ch +15 dBm/channel
Gain adjustment range N/A 55 to 85 dB
Noise Figure N/A DL 6 dBUL 4 dB
Group Delay N/A 6 s
ACCR N/A
EVM N/A
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply N/A 115/230 VAC
Power Supply (Optional) N/A N/A
Power Consumption N/A 160 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type N/A N/A
Wireless MOD EM Frequencies N/A N/A
Packet Data Mode N/A N/A
Fallback Circuit Switched Mode N/A N/A
Northbound Traffic N/A N/A
Maintenance N/A N/A
Remote Management N/A N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N/A N-female
Dimension (HxWxD)mm(ft) N/A 440 x 530 x 121 (15x19x4.8)
Weight kg(lbs) N/A 19 (42)
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) N/A -13 to +131 (-25 to +55)
Housing Specification N/A NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio N/A TS 125 106
Regulatory Compliance EMC N/A TS 125 113
*Stand alone Notes:

Updated: May 19 2011 2:12PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 111

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80208 Standard Channel Selective Repeater 900MHz GSM-R, 2CH,
FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND
KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) max +33dBm/channel at fiber optical interface input
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 2ch: 160W
REMOTE CONTROL*
Type Remote control via optical link master unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.7 and greater
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:40AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 112

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80209 Standard Channel Selective Repeater 900MHz GSM-R, 2CH, AC
PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK
AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) +33 dBm/channel
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 2ch: 160W
REMOTE CONTROL*
Type IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 GSM-R
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM-R
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.7 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:42AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 113

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80218 Standard Channel Selective Repeater 900MHz GSM-R, 2CH,
FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16
CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) max +33dBm/channel at fiber optical interface input
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC, two AC power supplies for redundancy
Power Supply (Optional) NA
Power Consumption 2ch: 160W
REMOTE CONTROL*
Type Remote control via optical link master unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.7 and greater
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) < 39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 114

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80219 Standard Channel Selective Repeater 900MHz GSM-R, 2CH,
WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R
WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) +33 dBm/channel
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC, two AC power supplies for redundancy
Power Supply (Optional) NA
Power Consumption 2ch: 160W
REMOTE CONTROL*
Type IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 GSM-R
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM-R
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.7 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 [86]
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 115

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80229 Standard Channel Selective, 900MHz GSM-R, 2CH, DC PSU,
7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL,
LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) +33 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 21-60 VDC
Power Supply (Optional) NA
Power Consumption 2ch: 160W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 11:54AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 116

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80408 Standard Channel Selective Repeater 900MHz GSM-R, 4CH,
FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND
KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) max +29dBm/channel at fiber optical interface input
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type Remote control via optical link master unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.7 and greater
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:57AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 117

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80409 Standard Channel Selective Repeater 900MHz GSM-R, 4CH, AC
PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK
AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) +29 dBm/channel
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 GSM-R
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM-R
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.7 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 11:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 118

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80418 Standard Channel Selective Repeater 900MHz GSM-R, 4CH,
FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16
CON, DOOR SWITCH, LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) max +29dBm/channel at fiber optical interface input
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC, two AC power supplies for redundancy
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type Remote control via optical link master unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.7 and greater
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 12:02PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 119

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80419 Standard Channel Selective Repeater 900MHz GSM-R, 4CH,
WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R
WIRELESS REMOTE CONTROL, LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) +29 dBm/channel
Gain adjustment range 55 to 90 dB (DL/UL)
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC, two AC power supplies for redundancy
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 GSM-R
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM-R
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.7 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

Updated: Aug 16 2011 12:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 120

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/80429 Standard Channel Selective, 900MHz GSM-R, 4CH, DC PSU,
7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL,
LOCK AND KEYS
ELECTRICAL DATA*
Range GSM-R
Frequency Band UL (MHz) 876-880
Frequency Band DL (MHz) 921-925
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) +29 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 5 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 21-60 VDC
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 12:07PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 121

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/90209 STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM,
2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range EGSM
Frequency Band UL (MHz) 880-915
Frequency Band DL (MHz) 925-960
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +33 dBm/channel
Output Power UL (min) +33 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 160W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 12:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 122

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/90409 STANDARD CH SEL REPEATER 900MHz EGSM, 4CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range EGSM
Frequency Band UL (MHz) 880-915
Frequency Band DL (MHz) 925-960
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) +29 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 250W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) >26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 12:10PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 123

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1700/90419 STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC
PSU,7/16 CON,GSM/GPRS REMOTE CONTROL,DOOR
SW,LOCK-KEYS
ELECTRICAL DATA*
Range EGSM
Frequency Band UL (MHz) 880-915
Frequency Band DL (MHz) 925-960
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +29 dBm/channel
Output Power UL (min) +29 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 250W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection 7/16-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 12:12PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 124

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1717/90609 STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM,
6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range EGSM
Frequency Band UL (MHz) 880-915
Frequency Band DL (MHz) 925-960
No. of Channels 6
Bandwidth 200 KHz/channel
Output Power DL (min) +26 dBm/channel
Output Power UL (min) +26 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 410W (2 Separate PSUs)
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 12:55PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 125

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR2700/50209 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,
2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1710-1785
Frequency Band DL (MHz) 1805-1880
No. of Channels 2
Bandwidth 200 KHz/channel
Output Power DL (min) +32 dBm
Output Power UL (min) +32 dBm
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 160W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 1:05PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 126

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR2700/50409 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,
4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1710-1785
Frequency Band DL (MHz) 1805-1880
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +28 dBm/channel
Output Power UL (min) +28 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 160W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 1:05PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 127

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR2727/50609 STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,
6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1710-1785
Frequency Band DL (MHz) 1805-1880
No. of Channels 6
Bandwidth 200 KHz/channel
Output Power DL (min) +25 dBm/channel
Output Power UL (min) +25 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 410W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 1:07PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 128

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR3700/50409 STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM,
4CH, 850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR
SW,LOCK-KEYS
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1850-1910
Frequency Band DL (MHz) 1930-1990
No. of Channels 4
Bandwidth 200 KHz/channel
Output Power DL (min) +28 dBm/channel
Output Power UL (min) +28 dBm/channel
Gain adjustment range 55 to 90 dB
Noise Figure 4 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 4ch: 250W
REMOTE CONTROL*
Type IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 850 / 1900 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female (7/16 option)
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Aug 16 2011 1:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 129

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR6500/00109 Standard Channel Selective Repeater 2100MHz WCDMA,
2Channel, GSM/GPRS REMOTE CONTROL, DOOR Switch
ELECTRICAL DATA*
Range WCDMA
Frequency Band UL (MHz) 1920 -1980
Frequency Band DL (MHz) 2110 - 2170
No. of Channels 2ch
Bandwidth 4.4 MHz/channel
Output Power DL (min) 1ch +30 dBm/channel, 2ch +25 dBm/channel
Output Power UL (min) 1ch +20 dBm/channel, 2ch +15 dBm/channel
Gain adjustment range DL 55 to 85 dB, UL 55 to 85 dB
Noise Figure DL 6 dB, UL 4 dB
Group Delay 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 160 W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x195 (17.6x21x7.7) Excluding bracket and hinges
Weight kg (lbs) <26 (57)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 125 106
Regulatory Compliance EMC TS 125 113

Updated: Aug 16 2011 12:57PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 130

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6512/00229 Standard Repeater Dual Band Channel Selective 2100MHz
WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz
Bandwidth, GSM/GPRS REM CTRL, Combined Donor and
Service, Door Switch
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 900
Frequency Band UL (MHz) 1920 -1980 890-915
Frequency Band DL (MHz) 2110 - 2170 925-960
No. of Channels 2ch Broad band
Bandwidth (MHz) 4.4 channel 25 MHz
Output Power DL +24 dBm/channel 24 dBm composite
Output Power UL +14 dBm/channel 24 dBm composite
Gain adjustment range 55 to 85 dB 55 to 85 dB
Noise Figure UL 6 dB, DL 8 dB 7 dB
Group Delay 6 s 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 200W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet NA
Fallback Circuit Switched Mode GSM NA
Northbound Traffic SNMP v1, v2c and http NA
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NA
Remote Management NWM 3.2.2 and greater; local web interface NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:24PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 131

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6512/00239 Standard Repeater DualBand Channel Selective 2100MHz
WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz
Bandwidth, GSM/GPRS REM CTRL, Separated Donor and
Combined Service, Door Switch
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 900
Frequency Band UL (MHz) 1920 -1980 890-915
Frequency Band DL (MHz) 2110 - 2170 935-960
No. of Channels 2ch Band Selective
Bandwidth (MHz) 4.4 channel 25 MHz
Output Power DL +24 dBm channel +25 dBm composite
Output Power UL +15 dBm/channel +26 dBm composite
Gain adjustment range 55 to 85 dB 55 to 85 dB
Noise Figure UL 5 dB, DL 7 dB 6 dB
Group Delay 6 s 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 200W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:25PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 132

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6517/01429 Standard Repeater Dual Band Channel Selective 2100MHz
WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL,
Combined Donor and Service, Door Switch
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 900
Frequency Band UL (MHz) 1920 -1980 890 - 915
Frequency Band DL (MHz) 2110 - 2170 935 - 960
No. of Channels 2ch 4ch
Bandwidth (MHz) 4.4 channel 200 KHz/channel
Output Power DL +24 dBm/channel +28 dBm/channel
Output Power UL +14 dBm/channel N/A
Gain adjustment range 55 to 85 dB 55 to 90 dB
Noise Figure UL 6 dB DL 8 dB 5 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 250W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet NA
Fallback Circuit Switched Mode GSM NA
Northbound Traffic SNMP v1, v2c and http NA
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NA
Remote Management NWM 3.2.2 and greater; local web interface NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:27PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 133

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6517/01439 Standard Repeater DualBand Channel Selective 2100MHz
WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL,
Separated Donor and Combined Service, Door Switch
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 900
Frequency Band UL (MHz) 1920 -1980 890 - 915
Frequency Band DL (MHz) 2110 - 2170 935 - 960
No. of Channels 2ch 4ch
Bandwidth (MHz) 4.4 channel 200 KHz/channel
Output Power DL +24 dBm/channel +28 dBm/channel
Output Power UL +15 dBm/channel +29 dBm/channel
Gain adjustment range 55 to 85 dB 55 to 90 dB
Noise Figure UL 5 dB DL 7 dB 4 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 250W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet NA
Fallback Circuit Switched Mode GSM NA
Northbound Traffic SNMP v1, v2c and http NA
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NA
Remote Management NWM 3.2.2 and greater; local web interface NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:28PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 134

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6517/01459 Standard Repeater DualBand Channel Selective 2100MHz
WCDMA, 2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16
Connectors, GSM/GPRS REM CTRL, Separated Donor and
Combined Service, DOOR Switch, LOCK-KEYS
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 900
Frequency Band UL (MHz) 1920 -1980 890 - 915
Frequency Band DL (MHz) 2110 - 2170 935 - 960
No. of Channels 2ch 4ch
Bandwidth (MHz) 4.4 channel 200 KHz/channel
Output Power DL +24 dBm channel +28 dBm/channel
Output Power UL +15 dBm/channel +29 dBm/channel
Gain adjustment range 55 to 85 dB 55 to 90 dB
Noise Figure UL 5 dB DL 7 dB 4 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 250W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet NA
Fallback Circuit Switched Mode GSM NA
Northbound Traffic SNMP v1, v2c and http NA
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NA
Remote Management NWM 3.2.2 and greater; local web interface NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection 7/16 female 7/16 female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:29PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 135

POWERWAVE Channel Selective Standard Repeaters

*All specifications subject to change.

AR6522/01109 Standard Repeater DualBand Channel Selective 2100MHz
WCDMA, 2Ch / Band Selective 1800MHz GSM Low Band,
16.9MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor
and Service, Door Switch
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA2100 GSM 1800 LB
Frequency Band UL (MHz) 1920 -1980 1710-1765
Frequency Band DL (MHz) 2110 - 2170 1805-1860
No. of Channels 2ch Band Selective
Bandwidth (MHz) 4.4 channel 16.9 MHz
Output Power DL +24 dBm/channel 28 dBm composite
Output Power UL +14 dBm/channel 28 dBm composite
Gain adjustment range 55 to 85 dB 55 to 85 dB
Noise Figure UL 6 dB DL 8 dB 7 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 160 W 200W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft)
447x530x297 (17.6x21x11.7) Excluding bracket and
hinges
N/A
Weight kg(lbs) <39 (86) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Aug 16 2011 1:30PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 136

POWERWAVE Channel Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR6560/00209 Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch,
High Power, GSM/GPRS REMOTE CONTROL, Door Switch
ELECTRICAL DATA*
Range WCDMA2100
Frequency Band UL (MHz) 1920 -1980
Frequency Band DL (MHz) 2110 - 2170
No. of Channels 2ch
Bandwidth 4.4 MHz/channel
Output Power DL (min) 1ch +37 dBm/channel, 2ch +32 dBm/channel
Output Power UL (min) 1ch +20 dBm/channel, 2ch +15 dBm/channel
Gain adjustment range DL 65 to 95 dB, UL 55 to 85 dB
Noise Figure DL 6 dB, UL 4 dB
Group Delay 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 320W (2 separate PSU)
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 447x530x297 (17.6x21x11.7) Excluding bracket and hinges
Weight kg (lbs) <39 (86)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 125 106
Regulatory Compliance EMC TS 125 113

Updated: Aug 16 2011 1:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 137

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page
Compact Repeater
Band Selective, 2100
MHz
WCDMA Band selective 0.5 to 15 ALR0062/00109 141
Compact Band
Selective, 900 MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 25 ALR1200/90209 142
Compact Band
Selective, 900 MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 25 ALR1200/00209 143
Dual Cell Compact
Repeater, 900 MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 25 ALR1212/00209 144
Compact Band
Selective, 1800 MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 25 ALR2200/00209 145
Compact Band
Selective, 1800 MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 25 ALR2200/90209 146
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 15 ALR2212/00119 147
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 15 ALR2212/00129 148
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 15 ALR2212/92202 149
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
LTE
Band selective 0.5 to 15 ALR2222/00109 150
Compact Band
Selective, 1900MHz
TDMA Band selective 0.5 to 15 ALR3200/00109 151
Compact Band
Selective, 1900MHz
CDMA Band selective 0.5 to 15 ALR3200/01109 152
Compact Band
Selective, 1900MHz
TDMA Band selective 0.5 to 15 ALR3200/90109 153
Coverage Products
Band Selective Compact Repeaters
138

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page
Compact Band
Selective, 1900MHz
CDMA Broad band 0.5 to 15 ALR3200/91109 154
Compact Dual Band
Repeater, 1900MHz
CDMA Band selective 0.5 to 15 ALR3232/51109 155
Compact Dual Band
Repeater, 1900MHz
CDMA Band selective 0.5 to 15 ALR3242/03039 156
Compact Dual Band
Repeater, 1900MHz
CDMA Band selective 0.5 to 15 ALR3246/00309 157
Compact Dual Band
Repeater, 1900MHz
TDMA Broad band 0.5 to 15 ALR3246/010 158
Compact Dual Band
Repeater, 800MHz
TDMA Band selective 0.5 to 15/25 ALR4200/00209 159
Compact Dual Band
Repeater, 850MHz
CDMA Band selective 0.5 to 15 ALR4200/01109 160
Compact Dual Band
Repeater, 850MHz
CDMA Band selective 0.5 to 25 ALR4200/01209 161
Compact Band
Selective, 850MHz
CDMA Broad band 0.5 to 25 ALR4600/00109 162
Compact Band
Selective, 850MHz
iDEN Band selective 0.5 to 15 ALR4600/00119 163
Compact Band
Selective, 800MHz
iDEN Band selective 0.5 to 18 ALR4600/00209 164
Compact Band
Selective, 2100MHz
WCDMA,
HSPA+, LTE
Band selective 0.5 to 15 ALR6200/00109 165
Compact Dual Band
900/2100
WCDMA Band selective 0.5 to 15 ALR6212/00102 166
Coverage Products
Band Selective Compact Repeaters
139

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page
Compact Dual Band
900/2100
WCDMA Band selective 0.5 to 15 ALR6212/90129 167
Dual Band Compact,
900/2100MHz
WCDMA Broad band 0.5 to 15 ALR6212/90139 168
Compact In-train Band
Selective, 900 MHz
GSM, HSPA+,
LTE
Broad band 0.5 to 25 ALT1200/00209 169









Coverage Products
Band Selective Compact Repeaters
140

POWERWAVE Band Selective Compact Repeaters


ALR0062/00109 UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz
WCDMA, BW15MHz, STAND ALONE, SEPARATED
DONOR/SERVICE
ELECTRICAL DATA*
Range WCDMA, HSPA+, LTE
Frequency Band UL (MHz) 1920-1980
Frequency Band DL (MHz) 2110-2170
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +24 dBm Composite
Output Power UL (min) +20 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure DL 5 dB, UL 3 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) 21-60 VDC
Power Consumption 60W
REMOTE CONTROL*
Type NA
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NA
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x55 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 125.106
Regulatory Compliance EMC TS 125.113
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:07PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 141

POWERWAVE Band Selective Compact Repeaters


ALR1200/90209 COMPACT REPEATER BAND SELECTIVE 900MHz EGSM,
BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range GSM, HSPA+, LTE
Frequency Band UL (MHz) 880-905
Frequency Band DL (MHz) 925-950
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +22 dBm Composite
Output Power UL (min) +22 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure 8 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:10PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 142

POWERWAVE Band Selective Compact Repeaters


ALR1200/00209 COMPACT REPEATER BAND SELECTIVE 900MHz GSM,
BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range GSM, HSPA+, LTE
Frequency Band UL (MHz) 890-915
Frequency Band DL (MHz) 935-960
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +22 dBm Composite
Output Power UL (min) +22 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure 8 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 143

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR1212/00209 COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz
BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE
CONTROL,COMBINED DONOR AND SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 890-915 890-915
Frequency Band DL (MHz) 935-960 935-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 25 MHz 0.5 to 25 MHz
Output Power DL +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined service ports)
Output Power UL +19 dBm Composite (Combined donor ports) +19 dBm Composite (Combined donor ports)
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) N/A N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N/A
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

Notes:

Updated: Nov 9 2010 6:14PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 144

POWERWAVE Band Selective Compact Repeaters


ALR2200/00209 COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB,
BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range GSM, HSPA+, LTE
Frequency Band UL (MHz) 1710-1765
Frequency Band DL (MHz) 1805-1860
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +23 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure 8 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x7 )
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:16PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 145

POWERWAVE Band Selective Compact Repeaters


ALR2200/90209 COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB,
BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range GSM, HSPA+, LTE
Frequency Band UL (MHz) 1730-1785
Frequency Band DL (MHz) 1825-1880
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +23 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure 8 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x7 )
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:17PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 146

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR2212/00119 COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,
15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED
DONOR/SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 1710-1765 890-915
Frequency Band DL (MHz) 1805-1860 935-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz
Output Power DL +23 dBm Composite +22 dBm Composite
Output Power UL +23 dBm Composite +22 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) N/A N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N/A
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

Notes:

Updated: Nov 9 2010 6:28PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 147

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR2212/00129 COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,
15/15MHz BW, GSM/GPRS REM CTRL, COMBINED
DONOR/SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 1710-1765 890-915
Frequency Band DL (MHz) 1805-1860 935-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz
Output Power DL +22 dBm Composite +21 dBm Composite
Output Power UL +22 dBm Composite +21 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) N/A N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N/A
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

Notes:

Updated: Nov 9 2010 6:31PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 148

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR2212/92202 COMPACT REPEATER DUAL BAND GSM1800 UB/GSM900MHz,
25/25MHz BW, GSM/GPRS REM CTRL, SEPARATED
DONOR/SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 1730-1785 890-915
Frequency Band DL (MHz) 1825-1880 935-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 25 MHz 0.5 to 25 MHz
Output Power DL +23 dBm Composite +22 dBm Composite
Output Power UL +23 dBm Composite +22 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) N/A N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N/A
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1

Notes:

Updated: Mar 17 2011 11:43AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 149

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR2222/00109 Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz
BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote
Control, Combined Donor And Service
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 1710-1765 1710-1765
Frequency Band DL (MHz) 1805-1860 1805-1860
No. of Channels Band Selective Broad band
Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz
Output Power DL +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined service ports)
Output Power UL +20 dBm Composite (Combined donor ports) +20 dBm Composite (Combined donor ports)
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) N/A N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWV 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N/A
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1
The combined output power at donor and service port is 3dB lower than the nominal output
power for each repeater cell.
Notes:

Updated: Nov 29 2010 4:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 150

POWERWAVE Band Selective Compact Repeaters


ALR3200/00109 COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range TDMA
Frequency Band UL (MHz) 1850-1890
Frequency Band DL (MHz) 1930-1970
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 24
Regulatory Compliance EMC FCC Rule 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 7:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 151

POWERWAVE Band Selective Compact Repeaters


ALR3200/01109 COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1850-1890
Frequency Band DL (MHz) 1930-1970
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 24
Regulatory Compliance EMC FCC Rule 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 7:56AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 152

POWERWAVE Band Selective Compact Repeaters


ALR3200/90109 COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range TDMA
Frequency Band UL (MHz) 1870-1910
Frequency Band DL (MHz) 1950-1990
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 24
Regulatory Compliance EMC FCC Rule 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 7:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 153

POWERWAVE Band Selective Compact Repeaters


ALR3200/91109 COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1870-1910
Frequency Band DL (MHz) 1950-1990
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 24
Regulatory Compliance EMC FCC Rule 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 8:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 154

POWERWAVE Band Selective Compact Repeaters


ALR3232/51109 COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz
BW/1900MHz CDMA UB, 15MHz BW, COMBINED
DONOR/SERVICE
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1870-1910 (UB)/ 1850-1890 (LB)
Frequency Band DL (MHz) 1950-1990 (UB)/ 1930-1970 (LB)
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +23 dBm Composite (UB and LB combined ports)
Output Power UL (min) +23 dBm Composite (UB and LB combined ports)
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 120W
REMOTE CONTROL*
Type NA
Wireless MOD EM Frequencies -
Packet Data Mode -
Fallback Circuit Switched Mode -
Northbound Traffic -
Maintenance -
Remote Management NA
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6)
Weight kg(lbs) 18 (40)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 24
Regulatory Compliance EMC FCC Rule 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 2:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 155

POWERWAVE Band Selective Compact Repeaters

*All specifications subject to change.

ALR3242/03039 COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA
800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range CDMA 1900 CDMA 800
Frequency Band UL (MHz) 1850-1890 824-849
Frequency Band DL (MHz) 1930-1970 869-894
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 15 MHz 0.5 to 15 MHz
Output Power DL +26 dBm Composite +26 dBm Composite
Output Power UL +26 dBm Composite +23 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 60W 60 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type NA NA
Wireless MOD EM Frequencies NA NA
Packet Data Mode NA NA
Fallback Circuit Switched Mode NA NA
Northbound Traffic NA NA
Maintenance NA NA
Remote Management NA NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female (7/16 option)
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio FCC Rule 24 FCC Rule 22
Regulatory Compliance EMC FCC Rule 24 FCC Rule 22

Notes:

Updated: Nov 9 2010 2:50PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 156

POWERWAVE Band Selective Compact Repeaters

*All specifications subject to change.

ALR3246/00309 COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN
800 MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED
SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM 1900 iDEN
Frequency Band UL (MHz) 1850-1890 806-824
Frequency Band DL (MHz) 1930-1970 851-869
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 15 MHZ 0.5 to 15 MHz
Output Power DL +24 dBm Composite +24 dBm Composite
Output Power UL +25 dBm Composite +25 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 9 dB 9 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 115/230 VAC
Power Supply (Optional) NA NA
Power Consumption 60W 60 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type NA NA
Wireless MOD EM Frequencies NA NA
Packet Data Mode NA NA
Fallback Circuit Switched Mode NA NA
Northbound Traffic NA NA
Maintenance NA NA
Remote Management NA NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female (7/16 option)
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio FCC Rule 24 FCC Rule 90
Regulatory Compliance EMC FCC Rule 24 FCC Rule 90

Notes:

Updated: Nov 9 2010 3:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 157

POWERWAVE Band Selective Compact Repeaters

*All specifications subject to change.

ALR3246/010 family Dual Band 1900/iDEN Compact
ELECTRICAL DATA*
Section Bottom Section Door Section
Range TDMA 1900 iDEN
Frequency Band UL (MHz) 1850-1890 806-824
Frequency Band DL (MHz) 1930-1970 851-869
No. of Channels Broad band Broad band
Bandwidth (MHz) 0.5 to 15 0.5 to 15/18 MHz
Output Power DL +25 dBm Composit +25 dBm Composit
Output Power UL +25 dBm Composit N/A
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure 8 dB 8 dB
Group Delay 6 s 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 115/230 VAC
Power Supply (Optional) 21-60 VDC (optional) 21-60 VDC (optional)
Power Consumption 60W 60 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female (7/16 option)
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio FCC Rule 24 FCC Rule 90
Regulatory Compliance EMC FCC Rule 24 FCC Rule 90
Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB
Notes:

Updated: Mar 31 2011 1:11PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 158

POWERWAVE Band Selective Compact Repeaters


ALR4200/00209 COMPACT REPEATER BAND SELECTIVE 850MHz AMPS,
BW25MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range TDMA
Frequency Band UL (MHz) 824-849
Frequency Band DL (MHz) 869-894
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 22
Regulatory Compliance EMC FCC Rule 22
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:17PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 159

POWERWAVE Band Selective Compact Repeaters


ALR4200/01109 COMPACT REPEATER BAND SELECTIVE 850MHz CDMA,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 824-849
Frequency Band DL (MHz) 869-894
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 22
Regulatory Compliance EMC FCC Rule 22
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:20PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 160

POWERWAVE Band Selective Compact Repeaters


ALR4200/01209 COMPACT REPEATER BAND SELECTIVE 850MHz CDMA,
BW25MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 824-849
Frequency Band DL (MHz) 869-894
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +23 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 22
Regulatory Compliance EMC FCC Rule 22
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:21PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 161

POWERWAVE Band Selective Compact Repeaters


ALR4600/00109 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range iDEN
Frequency Band UL (MHz) 806-824
Frequency Band DL (MHz) 851-869
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type PSTN Unit
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 90
Regulatory Compliance EMC FCC Rule 90
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:27PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 162

POWERWAVE Band Selective Compact Repeaters


ALR4600/00119 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz,
850/1900 MHz GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range iDEN
Frequency Band UL (MHz) 806-824
Frequency Band DL (MHz) 851-869
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 850 / 1900 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 90
Regulatory Compliance EMC FCC Rule 90
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:33PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 163

POWERWAVE Band Selective Compact Repeaters


ALR4600/00209 COMPACT REPEATER BAND SELECTIVE 800 iPS, BW18MHz
ELECTRICAL DATA*
Range iDEN
Frequency Band UL (MHz) 806-824
Frequency Band DL (MHz) 851-869
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 18MHz
Output Power DL (min) +25 dBm Composite
Output Power UL (min) +25 dBm Composite
Gain adjustment range 55 to 70 dB
Noise Figure 8 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type NA
Wireless MOD EM Frequencies NA
Packet Data Mode NA
Fallback Circuit Switched Mode NA
Northbound Traffic NA
Maintenance NA
Remote Management NA
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Rule 90
Regulatory Compliance EMC FCC Rule 90
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 3:38PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 164

POWERWAVE Band Selective Compact Repeaters


ALR6200/00109 COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA,
BW15MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range WCDMA, HSPA+, LTE
Frequency Band UL (MHz) 1920-1980
Frequency Band DL (MHz) 2110-2170
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 15 MHz
Output Power DL (min) +24 dBm Composite
Output Power UL (min) +20 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure DL 5 dB, UL 3 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 85-265 VAC
Power Supply (Optional) NA
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 125.106
Regulatory Compliance EMC TS 125.113
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 5:46PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 165

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR6212/00102 COMPACT REP DB 2100 MHz WCDMA/GSM900MHz,15/15MHz
BW,GSM/GPRS REM CTRL,CMB DONOR/SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA, HSPA+, LTE GSM, HSPA+, LTE
Frequency Band UL (MHz) 1920 -1980 890-915
Frequency Band DL (MHz) 2110 - 2170 935-960
No. of Channels Broad band Broad band
Bandwidth (MHz) 0.5 to 15 0.5 to 15 MHz
Output Power DL +24 dBm Composit +22 dBm Composit
Output Power UL +20 dBm Composit N/A
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure DL 5 dBUL 3 dB 8 dB
Group Delay 6 s 6 s
ACCR -51 dB (LTE) -51 dB (LTE)
EVM < 6.7% (LTE) < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional)
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1
Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB
Notes:

Updated: Mar 17 2011 12:38PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 166

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR6212/90129 COMPACT REPEATER DUAL BAND WCDMA/EGSM,
2100/900MHz, 15/25MHz BW, GSM/GPRS REM
CTRL,COMBINED DONOR AND SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA 2100 EGSM 900
Frequency Band UL (MHz) 1920 -1980 880-915
Frequency Band DL (MHz) 2110 - 2170 925-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 15 0.5 to 25 MHz
Output Power DL +23 dBm Composite +21 dBm Composite
Output Power UL +19 dBm Composite +21 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure DL 5 dBUL 3 dB 8 dB
Group Delay 6 s 6 s
ACCR -51dB (LTE) -
EVM < 6.7% (LTE) -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) NA NA
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet NA
Fallback Circuit Switched Mode GSM NA
Northbound Traffic SNMP v1, v2c and http NA
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NA
Remote Management NWM 3.2.2 and greater; local web interface NA
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Nov 9 2010 5:57PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 167

POWERWAVE Band Selective Compact Repeaters
*All specifications subject to change.

ALR6212/90139 COMPACT REPEATER DUAL BAND
WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC
PSU,GSM/GPRS REM CTRL,SEPARATE DONOR/COMBINED
SERVICE
ELECTRICAL DATA*
Section Bottom Section Door Section
Range WCDMA 2100 EGSM 900
Frequency Band UL (MHz) 1920 -1980 880-915
Frequency Band DL (MHz) 2110 - 2170 925-960
No. of Channels Broad band Band Selective
Bandwidth (MHz) 0.5 to 15 0.5 to 25 MHz
Output Power DL +23 dBm Composite +21 dBm Composite
Output Power UL +20 dBm Composite +22 dBm Composite
Gain adjustment range 55 to 70 dB 55 to 70 dB
Noise Figure DL 5 dBUL 3 dB 8 dB
Group Delay 6 s 6 s
ACCR -51dB (LTE) -
EVM < 6.7% (LTE) -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 85-265 VAC 85-265 VAC
Power Supply (Optional) NA N/A
Power Consumption 60W 60W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
NA
Wireless MOD EM Frequencies 900 / 1800 MHz NA
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft) 385x385x160 (13x13x6) N/A
Weight kg(lbs) 18 (40) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 125 106 TS 45.005
Regulatory Compliance EMC TS 125 113 EN 301 489-1

Notes:

Updated: Nov 9 2010 6:01PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 168

POWERWAVE Band Selective Compact Repeaters


ALT1200/00209 COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz
GSM, BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range GSM, HSPA+, LTE
Frequency Band UL (MHz) 890-915
Frequency Band DL (MHz) 935-960
No. of Channels Broad band
Bandwidth (MHz) 0.5 to 25 MHz
Output Power DL (min) +22 dBm Composite
Output Power UL (min) +22 dBm Composite
Gain adjustment range 55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure 8 dB
Group Delay 6 s
ACCR -51 dB (LTE)
EVM < 6.7% (LTE)
TECHNICAL SPECIFICATIONS*
Power Supply 21-60 VDC
Power Supply (Optional) N/A
Power Consumption 60W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 385x385x110 (13x13x4)
Weight kg(lbs) 10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Nov 9 2010 6:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 169

POWERWAVE

Repeater Products
Title Range (MHz) No. of Channels Bandwidth (MHz) Part Number Page
Maritime Standard
Band Selective,
900MHz
GSM Band selective 0.5 to 25 AM1200/05309 171
Standard Band
Selective, 900MHz
GSM, HSPA+ Broad band 0.5 to 25 AR1200/05309 172
Standard Band
Selective, 900MHz
GSM, HSPA+ Broad band 0.5 to 16.9 AR1200/95209 173
Standard Band
Selective, 1800MHz
GSM Broad band 0.5 to 16.9 AR200/00 174
Standard Band
Selective, 1800MHz
GSM Band selective 0.5 to 16.9 AR2200/00109 175
Standard Band
Selective, 1800MHz
GSM Broad band 0.5 to 16.9 AR200/90109 176
Standard Band
Selective,
900/1800MHz
GSM Broad band 0.5 to 16.9 AR2212/052 177
Standard Dual Band
Selective, 1800MHz
GSM Band selective 0.5 to 16.9 AR2212/05209 178
Standard Band
Selective, 1900MHz
CDMA Band selective 0.5 to 16.9 AR3400/01109 179
Standard Band
Selective, 1900MHz
CDMA Band selective 0.5 to 16.9 AR3400/91109 180
Standard Band
Selective, 1900MHz
CDMA Band selective 0.5 to 16.9 AR3434/51109 181
Standard Band
Selective, 850MHz
CDMA Band selective 0.5 to 16.9 AR4200/01209 182
Standard Band
Selective, 800MHz
SMR/iDEN Broad band 0.5 to 18 AR4600/05309 183
Standard Band
Selective, 800MHz
SMR/iDEN Broad band 0.5 to 18 AR4640/05309 184
Coverage Products
Band Selective Standard Repeaters
170

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AM1200/05309 STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz
GSM, BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door
Switch
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 890-915
Frequency Band DL (MHz) 935-960
No. of Channels Band Selective
Bandwidth 0.5 to 25 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +26 dBm Composit
Gain adjustment range 55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB)
Noise Figure 6 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 200 W
REMOTE CONTROL*
Type IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female (7/16 option)
Dimension (HxWxD)(mm) 440x530x195 (15x19x8)
Weight kg (lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Dec 6 2010 3:32PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 171

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1200/05309 STANDARD BAND SELECTIVE REPEATER 900MHz GSM,
BW25MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range GSM, HSPA+
Frequency Band UL (MHz) 890-915
Frequency Band DL (MHz) 935-960
No. of Channels Broad band
Bandwidth 0.5 to 25 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +26 dBm Composite
Gain adjustment range 55 to 85 dB / Gain ripple in band +/-2 dB
Noise Figure 6 dB
Group Delay 6 s
ACCR 43 dB (HSPA+)
EVM < 6% (HSPA+)
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 200 W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 440x530x195 (15x19x8)
Weight kg (lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Dec 6 2010 3:35PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 172

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR1200/95209 STANDARD BAND SELECTIVE REPEATER 900MHz
EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE
CONTROL,DOOR SW,LOCK-KEYS
ELECTRICAL DATA*
Range GSM, HSPA+
Frequency Band UL (MHz) 880-915
Frequency Band DL (MHz) 925-960
No. of Channels Band Selective
Bandwidth 0.5 to 16.9 MHz
Output Power DL (min) +26 dBm Composite
Output Power UL (min) +26 dBm Composite
Gain adjustment range 55 to 85 dB / Gain ripple in band +/-2 dB
Noise Figure 6 dB
Group Delay 6 s
ACCR 43 dB (HSPA+)
EVM < 6% (HSPA+)
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 200 W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 440x530x195 (15x19x8)
Weight kg (lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Dec 6 2010 3:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 173

POWERWAVE Band Selective Standard Repeaters


AR2200/00 Standard Band Selective, 1800 MHz
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1710-1765
Frequency Band DL (MHz) 1805-1860
No. of Channels Broad band
Bandwidth (MHz) 0.5 to 16.9 MHz
Output Power DL (min) +29 dBm Composit
Output Power UL (min) +29 dBm Composit
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) 21-60 VDC (optional)
Power Consumption 200 W
MECHANICAL DATA*
RF Connection N-female (7/16 option)
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x7 )
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 3:44PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 174

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR2200/00109 STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM
LB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR
SWITCH
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1710 - 1765
Frequency Band DL (MHz) 1805 - 1860
No. of Channels Broad band
Bandwidth 0.5 to 16.9 MHz
Output Power DL (min) +29 dBm Composite
Output Power UL (min) +29 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 200W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 440x530x195 (15x19x7 )
Weight kg (lbs) 22 [48]
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Dec 6 2010 3:46PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 175

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change without notice. Note: Values within [ ] is valid for a max configuration



AR2200/90109 STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM
UB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR
SWITCH
ELECTRICAL DATA*
Range GSM
Frequency Band UL (MHz) 1730 - 1785
Frequency Band DL (MHz) 1825 - 1880
No. of Channels Band Selective
Bandwidth 0.5 to 16.9 MHz
Output Power DL (min) +29 dBm Composite
Output Power UL (min) +29 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
ACCR -
EVM -
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) N/A
Power Consumption 200W
REMOTE CONTROL*
Type IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies 900 / 1800 MHz
Packet Data Mode GPRS and IP Ethernet
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Maintenance 10/100 BaseT Ethernet Port (DHCP managed) and RS232
Remote Management NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)(mm) 440x530x195 (15x19x7 )
Weight kg (lbs) 22 [48]
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio TS 45.005
Regulatory Compliance EMC EN 301 489-1

Updated: Mar 17 2011 12:44PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 176

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change.

AR2212/052 family Dual Band 900/1800 Band Selective
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM 1800 GSM 900
Frequency Band UL (MHz) 1710-1765 890-915
Frequency Band DL (MHz) 1805-1860 935-960
No. of Channels Broad band Broad band
Bandwidth (MHz) 0.5 to 16.9 0.5 to 16.9/25 MHz
Output Power DL +29 dBm Composit +26 dBm Composit
Output Power UL +29 dBm Composit N/A
Gain adjustment range 55 to 85 dB 55 to 85 dB
Noise Figure 7 dB 7 dB
Group Delay 6 s 6 s
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) 21-60 VDC (optional) 21-60 VDC (optional)
Power Consumption 200 W 200 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female (7/16 option) N-female (7/16 option)
Dimension (HxWxD)mm(ft) 440 x 530 x 280 (1 5x19x11) N/A
Weight kg(lbs) 37 (82) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1
Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB
Notes:

Updated: Dec 6 2010 3:49PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 177

POWERWAVE Band Selective Standard Repeaters
*All specifications subject to change.

AR2212/05209 STANDARD BAND SELECTIVE REPEATER DUAL BAND
1800MHz LB, BW16.9MHz/900MHz GSM, 16.9MHz BW,
GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND
SERVICE, DOOR SWITCH
ELECTRICAL DATA*
Section Bottom Section Door Section
Range GSM 1800 GSM 900
Frequency Band UL (MHz) 1710 - 1765 890-915
Frequency Band DL (MHz) 1805 - 1860 935-960
No. of Channels Band Selective Band Selective
Bandwidth (MHz) 0.5 to 16.9 0.5 to 16.9 MHz
Output Power DL +28 dBm Composite +25 dBm Composite
Output Power UL +28 dBm Composite +25 dBm Composite
Gain adjustment range 55 to 85 dB 55 to 85 dB
Noise Figure 6 dB 6 dB
Group Delay 6 s 6 s
ACCR - -
EVM - -
TECHNICAL SPECIFICATIONS*
Section Bottom Section Door Section
Power Supply 115/230 VAC 115/230 VAC
Power Supply (Optional) N/A N/A
Power Consumption 200 W 200 W
REMOTE CONTROL*
Section Bottom Section Door Section
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet
Data Interface
N/A
Wireless MOD EM Frequencies 900 / 1800 MHz N/A
Packet Data Mode GPRS and IP Ethernet N/A
Fallback Circuit Switched Mode GSM N/A
Northbound Traffic SNMP v1, v2c and http N/A
Maintenance
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
N/A
Remote Management NWM 3.2.2 and greater; local web interface N/A
MECHANICAL DATA*
Section Bottom Section Door Section
RF Connection N-female N-female
Dimension (HxWxD)mm(ft) 440 x 530 x 280 (1 5x19x11) N/A
Weight kg(lbs) 37 (82) N/A
ENVIRONMENTAL DATA*
Section Bottom Section Door Section
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55) -13 to +131 (-25 to +55)
Housing Specification NEMA 4 / IP65 NEMA 4 / IP65
APPROVALS AND TESTS*
Section Bottom Section Door Section
Regulatory Compliance Radio TS 45.005 TS 45.005
Regulatory Compliance EMC EN 301 489-1 EN 301 489-1
Performance is affected by the way Donor and Service antenna is configured. *If combined to
common antenna, output power decrease 1dB and NF increase 1dB
Notes:

Updated: Dec 6 2010 3:52PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 178

POWERWAVE Band Selective Standard Repeaters


AR3400/01109 STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB,
BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1850-1890
Frequency Band DL (MHz) 1930-1970
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 16.9 MHz
Output Power DL (min) +33 dBm Composite
Output Power UL (min) +33 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 200 W
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195(15x19x8)
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 24
Regulatory Compliance EMC FCC Part 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 3:53PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 179

POWERWAVE Band Selective Standard Repeaters


AR3400/91109 STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB,
BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1870-1910
Frequency Band DL (MHz) 1950-1990
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 16.9 MHz
Output Power DL (min) +33 dBm Composite
Output Power UL (min) +33 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 200 W
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x8)
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 24
Regulatory Compliance EMC FCC Part 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 3:54PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 180

POWERWAVE Band Selective Standard Repeaters

AR3434/51109 STANDARD BAND SELECTIVE REPEATER DUAL CELL
1900MHz CDMA UB,BW16.9MHz/1900MHz CDMA
LB,BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR
SWITCH
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 1870-1910 (UB) / 1850-1890 (LB)
Frequency Band DL (MHz) 1950-1990 (UB) / 1930-1970 (LB)
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 16.9 MHz (UB and LB)
Output Power DL (min) +30 dBm Composite (combined UB and LB ports)
Output Power UL (min) +30 dBm Composite (combined UB and LB ports)
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 400W (2 Separate PSUs)
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x280 (15x19x11)
Weight kg(lbs) 48[82]
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 24
Regulatory Compliance EMC FCC Part 24
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 3:56PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 181

POWERWAVE Band Selective Standard Repeaters


AR4200/01209 STANDARD BAND SELECTIVE REPEATER 850MHz CDMA,
BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range CDMA
Frequency Band UL (MHz) 824-849
Frequency Band DL (MHz) 869-894
No. of Channels Band Selective
Bandwidth (MHz) 0.5 to 16.9 MHz
Output Power DL (min) +33 dBm Composite
Output Power UL (min) +30 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 200 W
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x8)
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 22
Regulatory Compliance EMC FCC Part 22
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 3:56PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 182

POWERWAVE Band Selective Standard Repeaters


AR4600/05309 STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN,
BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range SMR/iDEN
Frequency Band UL (MHz) 806-824
Frequency Band DL (MHz) 851-869
No. of Channels Broad band
Bandwidth (MHz) 0.5 to 18 MHz
Output Power DL (min) +33 dBm Composite
Output Power UL (min) +33 dBm Composite
Gain adjustment range 55 to 85 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 200 W
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x195 (15x19x8)
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 90
Regulatory Compliance EMC FCC Part 90
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 4:02PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 183

POWERWAVE Band Selective Standard Repeaters


AR4640/05309 STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH
POWER, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range SMR/iDEN
Frequency Band UL (MHz) 806-824
Frequency Band DL (MHz) 851-869
No. of Channels Broad band
Bandwidth (MHz) 0.5 to 18 MHz
Output Power DL (min) +36 dBm Composite
Output Power UL (min) +33 dBm Composite
Gain adjustment range 65 to 95 dB
Noise Figure 6 dB
Group Delay 6 s
TECHNICAL SPECIFICATIONS*
Power Supply 115/230 VAC
Power Supply (Optional) NA
Power Consumption 320 W
MECHANICAL DATA*
RF Connection N-female
Dimension (HxWxD)mm(ft) 440x530x280 (15x19x11)
Weight kg(lbs) 22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius) -13 to +131 (-25 to +55 )
Housing Specification NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio FCC Part 90
Regulatory Compliance EMC FCC Part 90
*All specifications subject to change. Note: Values within [] is valid for a max configuration.

Updated: Dec 6 2010 4:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 184

POWERWAVE

Repeater Products

Title
Frequency Range
Up-Link (MHz)
Frequency Range
Down-Link (MHz) Part Number Page
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
890-915 935-960
ATR1200/001xy
(GSM 900)
186
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
890-915 935-960
ATR1200/002xy
(GSM 900)
187
Advanced Train Repeater
Module 900 MHz (EGSM
and UMTS)
880-905 925-950
ATR1200/901xy
(EGSM 900)
188
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
880-905 925-950
ATR1200/902xy
(EGSM 900)
189


Coverage Products
Advanced Train Repeaters
185

POWERWAVE Advanced Train Repeaters
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz

xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
ATR1200/001xy
(GSM 900)
Advanced Train Repeater Module 900 MHz (GSM and UMTS)
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) 890-915
Frequency Range Downlink (MHz) 935-960
Filter Bandwidth Adjustable (MHz) 0,5-15
Filter Settling Resolutions (KHz) 25
Gain Range 50-70 dB
Gain Step Resolution 1 dB
Gain Trail Dynamic Range 30 dB
Gain Trail Tracking Accuracy 2 dB
Output Power Composite (min) +23 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain 8 dB
Maximum Input Power +13 dBm
Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption < 50 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg(lbs) < 3 (6.6)
RF Connectors SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +45 C
Humidity EC 60068-2-56
Vibration EN 300019-1-5 V2, IEC-61373
Ingress Protection IP21
APPROVALS AND TESTS
Safety EN/ IEC 60 950
EMC ETS 301 489-1
EMC for Railway Application EN 50155, EN 50121-3-2
Radio ETSI EN 300 609-4

D042-071628 Updated: Nov 18 2009 1:12AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 186

POWERWAVE Advanced Train Repeaters
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz

xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
ATR1200/002xy
(GSM900)
Advanced Train Repeater Module 900 MHz (GSM and UMTS)
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) 890-915
Frequency Range Downlink (MHz) 935-960
Filter Bandwidth Adjustable (MHz) 0,5-25
Filter Settling Resolutions (KHz) 25
Gain Range 50-70 dB
Gain Step Resolution 1 dB
Gain Trail Dynamic Range 30 dB
Gain Trail Tracking Accuracy 2 dB
Output Power Composite (min) +23 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain 8 dB
Maximum Input Power +13 dBm
Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption < 50 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg(lbs) < 3 (6.6)
RF Connectors SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +45 C
Humidity EC 60068-2-56
Vibration EN 300019-1-5 V2, IEC-61373
Ingress Protection IP21
APPROVALS AND TESTS
Safety EN/ IEC 60 950
EMC ETS 301 489-1
EMC for Railway Application EN 50155, EN 50121-3-2
Radio ETSI EN 300 609-4

D031-08660 Updated: Jan 3 2010 11:28PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 187

POWERWAVE Advanced Train Repeaters
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz

xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
ATR1200/901xy
(EGSM900)
Advanced Train Repeater Module 900 MHz (EGSM and UMTS)
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) 880-905
Frequency Range Downlink (MHz) 925-950
Filter Bandwidth Adjustable (MHz) 0,5-15
Filter Settling Resolutions (KHz) 25
Gain Range 50-70 dB
Gain Step Resolution 1 dB
Gain Trail Dynamic Range 30 dB
Gain Trail Tracking Accuracy 2 dB
Output Power Composite (min) +24 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain 8 dB
Maximum Input Power +13 dBm
Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption < 50 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg(lbs) < 3 (6.6)
RF Connectors SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +45 C
Humidity EC 60068-2-56
Vibration EN 300019-1-5 V2, IEC-61373
Ingress Protection IP21
APPROVALS AND TESTS
Safety EN/ IEC 60 950
EMC ETS 301 489-1
EMC for Railway Application EN 50155, EN 50121-3-2
Radio ETSI EN 300 609-4

D031-08661 Updated: Nov 18 2009 1:12AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 188

POWERWAVE Advanced Train Repeaters
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz

xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
ATR1200/902xy
(EGSM900)
Advanced Train Repeater Module 900 MHz (GSM and UMTS)
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) 880-905
Frequency Range Downlink (MHz) 925-950
Filter Bandwidth Adjustable (MHz) 0,5-25
Filter Settling Resolutions (KHz) 25
Gain Range 50-70 dB
Gain Step Resolution 1 dB
Gain Trail Dynamic Range 30 dB
Gain Trail Tracking Accuracy 2 dB
Output Power Composite (min) +24 dBm (UL), +18dBm (DL)
Noise Figure 70 dB Gain 8 dB
Maximum Input Power +13 dBm
Power Supply 110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption < 50 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg(lbs) < 3 (6.6)
RF Connectors SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +45 C
Humidity EC 60068-2-56
Vibration EN 300019-1-5 V2, IEC-61373
Ingress Protection IP21
APPROVALS AND TESTS
Safety EN/ IEC 60 950
EMC ETS 301 489-1
EMC for Railway Application EN 50155, EN 50121-3-2
Radio ETSI EN 300 609-4

D031-08662 Updated: Nov 18 2009 1:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 189

POWERWAVE

Repeater Products

Title Frequency Range (MHz) Bandwidth (MHz) Part Number Page
Nexus RT 850/1900
MHz Dual Band Digital
Repeater
824-849 25 NP50B0-22111 191
Nexus RT 850 MHz
Digital Repeater
824-849 25 NP5O-11111 192
Nexus RT 1900 MHz
Digital Repeater
1850-1910 60 NPBO-11111 193
Nexus RT 1900 MHz
Digital Repeater with
Modem
880-915 35 NPBO-11311 194
Nexus RT Digital
Repeater Triple Band
900/1800/2100MHz
880-915 35
RTM1GU-
A2A1.J2J1.L2L1
195
Nexus RT Digital
Repeater Single Band
900MHz
880-915 35 RTM1GU-A2A1 196
Nexus RT Digital
Repeater Single Band
900/1800MHz
1710 - 1785/ 1920 1980
75 (1800MHz band),
60 (2100MHz band)
RTM1GU-A2A1.J2J1 197
Nexus RT Digital
Repeater Dual Band
900/2100MHz
880-915/1920-1980
35 (900MHz band),
60 (2100MHz band)
RTM1GU-A2A1.L2L1 198
Nexus RT Digital
Repeater Single Band
1800MHz
1710-1785 75 RTM1GU-J2J1 199
Nexus RT Digital
Repeater Dual Band
1800/2100MHz
1710 - 1785/ 1920 1980
75 (1800MHz band),
60 (2100MHz band)
RTM1GU-J2J1.L2L1 200
Nexus RT Digital
Repeater Single Band
2100MHz
1920 to 1980 60 RTM1GU-L2L1 201

Coverage Products
Digital Repeaters
190

POWERWAVE Digital Repeaters


All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NP50B0-22111 Nexus RT 850/1900 MHz Dual Band Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 824 - 849 1850 -1910
Frequency Range, Downlink (MHz) 869-894 1930 -1990
Instantaneous Bandwidth (MHz) 25 (850) 60 (1900)
Number of sub-bands 1 to 2 (850MHz), 1 to 5 (1900MHz)
Individual sub-band width, selectable (MHz) 1.5 2.5 10 11 25 2.5 5 7.5 10 15 20
Total sub-band width (MHz) 25 60
Gain adjustment range (1 dB steps) 55-85 dB
Output Power Downlink +28 dBm composite
Output Power Downlink +28 dBm composite
Output Power Uplink +28 dBm composite
Output Power Uplink +28 dBm composite
Noise Figure 6.6 dB (max. gain)
Feedback Cancellation >20 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 110-120 VAC
Power Consumption < 400 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)
Weight lbs < 50
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -30 C to +50 C
Casing Class IP 50
APPROVALS AND TESTS
Safety EN 60950, ETL
Environment ETS 300 019
EMC ETS 301 489-1
Radio FCC Parts 22 and 24

Updated: 2009-04-20 13:27:00Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 191

POWERWAVE Digital Repeaters


All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NP5O-11111 Nexus RT 850 MHz Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 824 - 849
Frequency Range, Downlink (MHz) 869-894
Instantaneous Bandwidth (MHz) 25
Number of sub-bands 1 to 2
Individual sub-band width, selectable (MHz) 1.5 2.5 10 11 25
Total sub-band width (MHz) 25
Gain adjustment range (1 dB steps) 55-85 dB
Output Power Downlink +28 dBm composite
Output Power Downlink +28 dBm composite
Output Power Uplink +28 dBm composite
Output Power Uplink +28 dBm composite
Noise Figure 6.6 dB (max. gain)
Feedback Cancellation >20 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 110-120 VAC
Power Consumption < 200 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)
Weight lbs 40
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -30 C to +50 C
Casing Class IP 50
APPROVALS AND TESTS
Safety EN 60950, ETL
Environment ETS 300 019
EMC ETS 301 489-1
Radio FCC Part 22

Updated: 2009-04-20 13:25:13Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 192

POWERWAVE Digital Repeaters


All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NPBO-11111 Nexus RT 1900 MHz Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 1850-1910
Frequency Range, Downlink (MHz) 1930-1990
Instantaneous Bandwidth (MHz) 60
Number of sub-bands 1 to 5
Individual sub-band width, selectable (MHz) 2.5 5 7.5 10 15 20
Total sub-band width (MHz) 60
Gain adjustment range (1 dB steps) 55-85 dB
Output Power Downlink +28 dBm composite
Output Power Downlink +28 dBm composite
Output Power Uplink +28 dBm composite
Output Power Uplink +28 dBm composite
Noise Figure 5 dB
Feedback Cancellation >20 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 110-120 VAC
Power Consumption < 200 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)
Weight lbs 40
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -30 C to +50 C
Casing Class IP 50
APPROVALS AND TESTS
Safety EN 60950, ETL
Environment ETS 300 019
EMC ETS 301 489-1
Radio FCC Part 24

Updated: 2009-03-24 22:04:35Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 193

POWERWAVE Digital Repeaters


All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

NPBO-11311 Nexus RT 1900 MHz Digital Repeater with Modem
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 1850-1910
Frequency Range, Downlink (MHz) 1930-1990
Instantaneous Bandwidth (MHz) 60
Number of sub-bands 1 to 5
Individual sub-band width, selectable (MHz) 2.5 5 7.5 10 15 20
Total sub-band width (MHz) 60
Gain adjustment range (1 dB steps) 55-85 dB
Output Power Downlink +28 dBm composite
Output Power Downlink +28 dBm composite
Output Power Uplink +28 dBm composite
Output Power Uplink +28 dBm composite
Noise Figure 5 dB
Feedback Cancellation >20 dB
Alarm Fault GPRS/Edge Mode (or IP connection )
Power Supply Options 110-120 VAC
Power Consumption < 200 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 381 x 305 x 229(15 x 12 x 9)
Weight lbs 40
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -30 C to +50 C
Casing Class IP 50
APPROVALS AND TESTS
Safety EN 60950, ETL
Environment ETS 300 019
EMC ETS 301 489-1
Radio FCC Part 24

Updated: Jan 28 2011 3:47PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 194

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM11GU-A2A1.J2J1.L2L1 has one service port per band, double power supply AC type, GSM/UMTS
MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM11GU-
A2A1.J2J1.L2L1
Nexus RT Digital Repeater Triple Band 900/1800/2100MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 880 - 915 1710 - 1785 1920 - 1980
Frequency Range, Downlink (MHz) 925 - 960 1805 - 1880 2110 - 2170
Instantaneous Bandwidth (MHz) 35 75 60
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From 0.2 up to 20
Total sub-band width (MHz) 35 75 60
Gain adjustment range (1 dB steps) 55 - 100 dB
Output Power Downlink
+36 dBm composite (4 GSM carriers
at +28 dBm), +35 dBm composite
(WCDMA/LTE)
+35 dBm composite (4 GSM carriers
at +28 dBm), +34 dBm composite
(WCDMA/LTE)
+35 dBm composite
Output Power Uplink
+36 dBm composite (4 GSM carriers
at +28 dBm), +35 dBm composite
(WCDMA/LTE)
+35 dBm composite (4 GSM carriers
at +28 dBm), +34 dBm composite
(WCDMA/LTE)
+35 dBm composite
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation > 30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 805 W, typical average < 475W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 760 x 340 (22.0x 30.0x 13.4)
Weight lbs <60 kg (<132 lbs)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-Radio 11, EN 301 908-15

RevG Updated: Oct 31 2011 5:27PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 195

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1 has first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-A2A1 Nexus RT Digital Repeater Single Band 900MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 880 - 915
Frequency Range, Downlink (MHz) 925-960
Instantaneous Bandwidth (MHz) 35
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 35
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink +36 dBm composite (4 GSM carriers at +28 dBm)
Output Power Downlink +36 dBm composite (WCDMA/LTE)
Output Power Uplink +36 dBm composite (4 GSM carriers at +28 dBm)
Output Power Uplink +36 dBm composite (WCDMA/LTE)
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 305 W, typical average 178W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 400 x 340 (22.0x 15.8x 13.4)
Weight lbs <62 (< 28 kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:23PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 196

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.J2J1 has one service port per band, first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-A2A1.J2J1 Nexus RT Digital Repeater Dual Band 900/1800MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 880 - 915 / 1710 - 1785
Frequency Range, Downlink (MHz) 925 - 960 / 1805 - 1880
Instantaneous Bandwidth (MHz) 35 (900MHz band), 75 (1800MHz band)
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 35 (900MHz band), 75 (1800MHz band)
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink +36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm)
Output Power Downlink +36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE)
Output Power Uplink +36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm)
Output Power Uplink +36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE)
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 555W, typical average < 325W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 580 x 340 (22.0x 22.9x 13.4)
Weight lbs <97 (<44kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:25PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 197

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-A2A1.L2L1 Nexus RT Digital Repeater Dual Band 900/2100MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 880 - 915 / 1920 - 1980
Frequency Range, Downlink (MHz) 925 - 960 / 2110 - 2170
Instantaneous Bandwidth (MHz) 35 (900MHz band), 60 (2100MHz band)
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 35 (900MHz band), 60 (2100MHz band)
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink +36 dBm composite (900), (4 GSM carriers at +28 dBm)
Output Power Downlink +36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE)
Output Power Uplink +36 dBm composite (900), (4 GSM carriers at +28 dBm)
Output Power Uplink +36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE)
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 555W, typical average < 325W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 580 x 340 (22.0x 22.9x 13.4)
Weight lbs <97 (<44kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:25PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 198

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1 has first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-J2J1 Nexus RT Digital Repeater Single Band 1800MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 1710 to 1785
Frequency Range, Downlink (MHz) 1805 to 1880
Instantaneous Bandwidth (MHz) 75
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 75
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink +35 dBm composite (4 GSM carriers at +28 dBm)
Output Power Downlink +35 dBm composite (WCDMA/LTE)
Output Power Uplink +35 dBm composite (4 GSM carriers at +28 dBm)
Output Power Uplink +35 dBm composite (WCDMA/LTE)
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 305W, typical average 178W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 400 x 340 (22.0x 15.8x 13.4)
Weight lbs <62 (< 28 kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:24PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 199

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-J2J1.L2L1 Nexus RT Digital Repeater Dual Band 1800/2100MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 1710 - 1785/ 1920 - 1980
Frequency Range, Downlink (MHz) 1805 - 1880 / 2110 - 2170
Instantaneous Bandwidth (MHz) 75 (1800MHz band), 60 (2100MHz band)
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 75 (1800MHz band), 60 (2100MHz band)
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink +35 dBm composite (1800), (4 GSM carriers at +28 dBm)
Output Power Downlink +35 dBm composite (1800 & 2100 WCDMA/LTE)
Output Power Uplink +35 dBm composite (1800), (4 GSM carriers at +28 dBm)
Output Power Uplink +35 dBm composite (1800 & 2100 WCDMA/LTE)
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 555W, typical average < 325W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 580 x 340 (22.0x 22.9x 13.4)
Weight lbs <97 (<44kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:26PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 200

POWERWAVE Digital Repeaters
Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-L2L1 has first power supply AC type, GSM/UMTS MODEM

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RTM1GU-L2L1 Nexus RT Digital Repeater Single Band 2100MHz
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) 1920 to 1980
Frequency Range, Downlink (MHz) 2110 to 2170
Instantaneous Bandwidth (MHz) 60
Number of sub-bands Up to 8
Individual sub-band width, selectable (MHz) From .2 up to 20
Total sub-band width (MHz) 60
Gain adjustment range (1 dB steps) 55-100 dB
Output Power Downlink NA
Output Power Downlink +35 dBm composite
Output Power Uplink NA
Output Power Uplink +35 dBm composite
Noise Figure 5 dB (75-100dB gain)
Group Delay <6 s
Feedback Cancellation >30 dB
Alarm Fault IP connection or wireless modem
Power Supply Options 97-132 VAC, 195-265 VAC; 21-60 VDC (option)
Power Consumption < 305 W, typical average 178W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) 560 x 400 x 340 (22.0x 15.8x 13.4)
Weight lbs <62 (< 28 kg)
RF Connectors N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -40 C to +55 C
Casing Class IP 65
APPROVALS AND TESTS
Safety EN 60950-1
Environment ETS 300 019
EMC EN 301 489-1, EN301 489-8, EN301 489-23
Radio EN 300 609-4, EN 301 908-11, EN 301 908-15

RevG Updated: Oct 31 2011 5:23PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 201
Turnkey Projects
We deliver complete turnkey solutions for wireless
coverage. We manage the entire project with full
responsibility, starting with analyzing and determining
required signal strength, quality and planning for future
expansion, right through implementation and operations.
All Powerwave turnkey systems are backed by full
performance guarantees, with full product and component
warranties for your peace of mind.
Powerwave Products
As new wireless services, technologies and opportunities
emerge, the ability to rapidly adapt will become even more
vital to network operators, building owners and public safety
agencies. Thats why Powerwave engineers fexibility into
every system. Its why we choose components that are
modular and adaptable. And its why our coverage solutions
are built from the ground up to be versatile.
In-Building and
Outdoor DAS Products
Power wave
Repeater Products
DAS Products

POWERWAVE

In-Building and Outdoor DAS Products

Public Safety Networks
Title Frequency Range (MHz) Gain Range Part Number Page
In-Hancer Plus Series
Bi-Directional Amplifier
380-430
28-70 dB, 28-40 dB
(SB400-F2L & SB400-F4L)
SB400-A 204
In-Hancer Plus Series
Bi-Directional Amplifier
450-512
28-70 dB, 28-40 dB
(SB400-F2L & SB400-F4L)
SB400-B 205
Coverage Products
Bi-Directional Amplifiers
203

POWERWAVE Bi-Directional Amplifiers
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed
environments experiencing coverage deficiency such as inside buildings, tunnels and garages.


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

SB400-A In-Hancer Plus Series Bi-Directional Amplifier
MODULE SPECIFICATIONS*
Frequency Range (MHz) 380-430
Passband Ripple 2.5 dB
Digital Gain Adjustment In 1 dB Increments
AGC Dynamic Range 25 dB
Gain_Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)
ID 3rd Order Intercept Point IP3 +44 dBm
Noise Figure <12 dB
Propagation Delay <1 s
Input Impedance 50
VSWR <2:1
Maximum RF Input +10 dBm
Primary Power 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 26.28 x 24 x 12.25
Weight (lbs) 120 lbs. approx
Operating Temperature Range (Celsius) -10C to +50
Enclosure Painted Steel - Wall Mount (Stainless Steel upgrade available)
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-SB400
IC Type Acceptance 541A-SB400
Filtering Options *Range * Passband Bandwidth Tx to Rx Separation
SB400-F1 380-430 MHz 1.0 MHz 5.0 MHz
SB400-F5 380-430 MHz 5.0 MHz 10.0 MHz
SB400-F2L 403-430 MHz 1.5 MHz 3.0 MHz
SB400-F2H1 403-430 MHz 1.5 MHz 3.0 MHz
SB400-F3 403-430 MHz 1.5 MHz 5.0 MHz
SB400-F4L 403-430 MHz 3.0 MHz 5.0 MHz
SB400-F4H1 403-430 MHz 3.0 MHz 5.0 MHz
SB400-F2H2 NA 1.5 MHz 3.0 MHz
SB400-F4H2 NA 3.0 MHz 5.0 MHz
SB400-F2H3 NA 1.5 MHz 3.0 MHz
SB400-F4H3 NA 3.0 MHz 5.0 MHz

Updated: Jan 13 2010 9:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 204

POWERWAVE Bi-Directional Amplifiers
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed
environments experiencing coverage deficiency such as inside buildings, tunnels and garages.


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

SB400-B In-Hancer Plus Series Bi-Directional Amplifier
MODULE SPECIFICATIONS*
Frequency Range (MHz) 450-512
Passband Ripple 2.5 dB
Digital Gain Adjustment In 1 dB Increments
AGC Dynamic Range 25 dB
Gain_Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)
ID 3rd Order Intercept Point IP3 +44 dBm
Noise Figure <12 dB
Propagation Delay <1 s
Input Impedance 50
VSWR <2:1
Maximum RF Input +10 dBm
Primary Power 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 26.28 x 24 x 12.25
Weight (lbs) 120 lbs. approx
Operating Temperature Range (Celsius) -10C to +50
Enclosure Painted Steel - Wall Mount (Stainless Steel upgrade available)
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-SB400
IC Type Acceptance 541A-SB400
Filtering Options *Range * Passband Bandwidth Tx to Rx Separation
SB400-F1 450-512 MHz 1.0 MHz 5.0 MHz
SB400-F5 450-512 MHz 5.0 MHz 10.0 MHz
SB400-F2L 450-512 MHz 1.5 MHz 3.0 MHz
SB400-F2H1 NA 1.5 MHz 3.0 MHz
SB400-F3 450-512 MHz 1.5 MHz 5.0 MHz
SB400-F4L 450-512 MHz 3.0 MHz 5.0 MHz
SB400-F4H1 NA 3.0 MHz 5.0 MHz
SB400-F2H2 450-4 70 MHz 1.5 MHz 3.0 MHz
SB400-F4H2 450-4 70 MHz 3.0 MHz 5.0 MHz
SB400-F2H3 470-512 MHz 1.5 MHz 3.0 MHz
SB400-F4H3 470-512 MHz 3.0 MHz 5.0 MHz

Updated: Jan 13 2010 9:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 205

POWERWAVE

Fiber Optic DAS Master Unit
Title Power Supply Bandwidth (MHz) Insertion Loss
Part
Number Page
Fiber Optic DAS
Master Unit
100-230 VAC and 16-
60 VDC
690-2200 0.25 dB Alarms UA115 04 207
Coverage Products
Fiber Optic DAS Master Unit
206

POWERWAVE Coverage Solutions
The Fiber Base Unit (FBU) for Distributed Antenna Systems (DAS) applications is especially tailored to provide a comprehensive and flexible coverage solution in
complex coverage environments like underground areas, tunnels, stations and terminals. The FBU converts and reconverts RF signals to optical signals. The truly
modular design of the FBU ensures a cost efficient solution for any DAS configuration. Configurable with up to six fiber optical nodes with WDM as an option, the
FBU is intended to feed star, point-to-point and chain network configurations of fiber optical repeaters. The FBU is designed for mounting in a 19-inch rack system
and the slot-in design of the modules ensures easy serviceability and reconfiguration. Remote control via IP and SNMP is available as an option for network
supervision with Powerwave Netway Vision.

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

UA115 04 Fiber Optic DAS Master Unit
ELECTRICAL SPECIFICATIONS
Bandwidth 690-2200 MHz
Input Impedence 50 Ohm
Max Input RF Power +36 dBm (+35 dBm composite)
Optical Transmitter Wavelength 1550 nm/1310nm
Optical Receiver Wavelength 1250 - 1600nm
Insertion Loss (min) 0.25 dB Alarms
Alarms
Fault RX and TX Alarms/Temperature/PSM Fault
External Alarm Inputs 3
Power Supply Options 100-230 VAC and 16-60 VDC
Power Consumption < 50 W, depending on configuration
Supported RF Systems 2100UMTS, GSM1800, 2100AWS, 1900, 900i, GSM-R, 850, 800i, 700PS and D-block
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 482.6 x 133.5 (3U) x 415 (19 x 5 x 16)
Weight lbs <7 (15)
RF Connectors SMA Female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature -30to + 55C (Ambient)
Ingress Protection IP42
APPROVALS AND TESTS
Safety -30to + 55C (Ambient)
Radio IP42
Environment EN 300 019 and GR-63-CORE
EMC EN 301 489-1 and GR-1089-CORE

Updated: Aug 4 2011 3:19PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 207

POWERWAVE

In-Building and Outdoor DAS Products

Public Safety Networks
Title Frequency Range (MHz) Bandwidth Part Number Page
LNKA800 Amplifier 806-940 Broadband Amplifier LNKA800 209
LNKF400 406.125-430, 450-512
Narrowband FM 12.5 or 25
KHz
LNKF400 210
LNKC1900
Banded Repeater
N/A
0.25 MHz, 1.25 MHz,
5 MHz, 15 MHz
LNKC1900 211
LNKA900 890-960 Broadband Amplifier LNKA900 212
LNKC1800
Banded Repeater
N/A
0.25 MHz, 1.25 MHz, 5 MHz,
15 MHz
LNKC1800 213
LNKF100 136-157, 155174
Narrowband FM 12.5 or 25
KHz
LNKF100 214
LNKF800
806-824,851-869,
896-901,935-940
Narrowband FM 12.5 or 25
KHz
LNKF800 215
Coverage Products
LinkNet Convergence Platform
208

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKA800 LNKA800 Amplifier
MODULE SPECIFICATIONS*
Frequency Range (MHz) 806-940
Downlink Frequency Range (MHz) NA
Uplink Frequency Range (MHz) NA
Bandwidth Broadband Amplifier
RF Gain Adjustment Range +34 dB to +84 dB, in 1 dB increments
AGC Control Adjustment Range +15 dBm to +30 dBm
RF Frequency Stability NA
Maximum RF Output Power NA
RF Output Power Range NA
RF Output Power Variation NA
Output Power 1 NA
Output Power 2 NA
Output Power 3 NA
Input Dynamic Range NA
Input Sensitivity Adjust Range NA
Input Hysteresis NA
Adjacent Channel Sensitivity NA
ID 3rd Order Intercept Point IP3 +47 dBm Typical
Noise Figure <8 dB, 5 dB Typical
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm Maximum
Receive Conducted Spurious -57 dBm Maximum
Group Delay <200 nS
Audio Distortion and Noise NA
Power Supply Module Requirements 40Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-LNKA800
IC Type Acceptance 1541311246A
* Module Family Type Frequency
LNKA800-A Broadband Amplifier 806-824 MHz
LNKA800-B Broadband Amplifier 851-869 MHz
LNKA800-C Broadband Amplifier 824-849 MHz
LNKA800-D Broadband Amplifier 869-894 MHz
LNKA800-E Broadband Amplifier 896-902 MHz
LNKA800-F Broadband Amplifier 928-940 MHz
NA NA NA
NA NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 209

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKF400 LNKF400
MODULE SPECIFICATIONS*
Frequency Range (MHz) 406.125 - 430, 450 - 512 MHz
Downlink Frequency Range (MHz) NA
Uplink Frequency Range (MHz) NA
Bandwidth Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range NA
AGC Control Adjustment Range NA
RF Frequency Stability Tracks input signal exactly
Maximum RF Output Power +37 dBm
RF Output Power Range +17 dBm to +37 dBm
RF Output Power Variation +/- 1 dB
Output Power 1 NA
Output Power 2 NA
Output Power 3 NA
Input Dynamic Range -110 dBm to -30 dBml
Input Sensitivity Adjust Range -110 dBm to -50 dBm
Input Hysteresis 1 dB to 10 dB
Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3 NA
Noise Figure NA
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious -57 dBm Maximum
Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements 45 Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-OFR400-A, H6M-OFR400
IC Type Acceptance 1541195680A
* Module Family Type Frequency
LNKF400-A1 25 KHz FM channels 406.125-430 MHz
LNKF400-A2 12.5 KHz FM channels 406.125-430 MHz
LNKF400-C1 25 KHz FM channels 450-470 MHz
LNKF400-C2 12.5 KHz FM channels 450-470 MHz
LNKF400-D1 25 KHz FM channels 470-490 MHz
LNKF400-D2 12.5 KHz FM channels 470-490 MHz
LNKF400-E1 25 KHz FM channels 490-512 MHz
LNKF400-E2 12.5 KHz FM channels 490-512 MHz

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 210

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKC1900 LNKC1900 Banded Repeater
MODULE SPECIFICATIONS*
Frequency Range (MHz) NA
Downlink Frequency Range (MHz) 1850-1910, 1930-1990
Uplink Frequency Range (MHz) NA
Bandwidth 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz
RF Gain Adjustment Range +65 dB to +95 dB, in 1 dB increments
AGC Control Adjustment Range NA
RF Frequency Stability Tracks input signal exactly
Maximum RF Output Power NA
RF Output Power Range NA
RF Output Power Variation NA
Output Power 1 1 Carrier: +27 dBm
Output Power 2 2 Carrier: +23 dBm each
Output Power 3 3 Carrier: +21 dBm each
Input Dynamic Range NA
Input Sensitivity Adjust Range NA
Input Hysteresis NA
Adjacent Channel Sensitivity NA
ID 3rd Order Intercept Point IP3 +44 dBm
Noise Figure <6 dB
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm Maximum
Receive Conducted Spurious -57 dBm Maximum
Group Delay <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models
Audio Distortion and Noise NA
Power Supply Module Requirements 40Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-LNKC1900
IC Type Acceptance 1541311242A
* Module Family Type Frequency
LNKC1900-D.2 Downlink 0.25 MHz Bandwidth 1930-1990 MHz
LNKC1900-D Downlink 1.25 MHz Bandwidth 1930-1990 MHz
LNKC1900-D5 Downlink 5 MHz Bandwidth 1930-1990 MHz
LNKC1900-D15 Downlink 15 MHz Bandwidth 1930-1990 MHz
LNKC1900-U.2 Uplink 0.25 MHz Band 1850-1910 MHz
LNKC1900-U Uplink 1.25 MHz Bandwidth 1850-1910 MHz
LNKC1900-U5 Uplink 5 MHz Bandwidth 1850-1910 MHz
LNKC1900-U15 Uplink 15 MHz Bandwidth 1850-1910 MHz

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 211

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKA900 LNKA900
MODULE SPECIFICATIONS*
Frequency Range (MHz) 890-960
Downlink Frequency Range (MHz) NA
Uplink Frequency Range (MHz) NA
Bandwidth Broadband Amplifier
RF Gain Adjustment Range +34 dB to +84 dB, in 1 dB increments
AGC Control Adjustment Range +15 dBm to +30 dBm
RF Frequency Stability NA
Maximum RF Output Power NA
RF Output Power Range NA
RF Output Power Variation NA
Output Power 1 NA
Output Power 2 NA
Output Power 3 NA
Input Dynamic Range NA
Input Sensitivity Adjust Range NA
Input Hysteresis NA
Adjacent Channel Sensitivity NA
ID 3rd Order Intercept Point IP3 +47 dBm Typical
Noise Figure <8 dB, 5 dB Typical
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm Maximum
Receive Conducted Spurious -57 dBm Maximum
Group Delay <200 nS
Audio Distortion and Noise NA
Power Supply Module Requirements 40Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode
Configuration Options Modules may be configured via optionalGateway Module, or via PC and an RS-232Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2 x 9.11 x 14 (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance NA
IC Type Acceptance NA
* Module Family Type Frequency
LNKA900-A Broadband Amplifier 890-915 MHz
LNKA9800-B Broadband Amplifier 935-960 MHz
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA
NA NA NA

Updated: Nov 23 2010 10:50PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 212

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKC1800 LNKC1800 Banded Repeater
MODULE SPECIFICATIONS*
Frequency Range (MHz) NA
Downlink Frequency Range (MHz) 1805-1880
Uplink Frequency Range (MHz) 1710-1785
Bandwidth 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz
RF Gain Adjustment Range +65 dB to +95 dB, in 1 dB increments
AGC Control Adjustment Range NA
RF Frequency Stability Tracks input signal exactly
Maximum RF Output Power NA
RF Output Power Range NA
RF Output Power Variation NA
Output Power 1 NA
Output Power 2 NA
Output Power 3 NA
Input Dynamic Range NA
Input Sensitivity Adjust Range NA
Input Hysteresis NA
Adjacent Channel Sensitivity NA
ID 3rd Order Intercept Point IP3 +44 dBm
Noise Figure <6 dB
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm Maximum
Receive Conducted Spurious -57 dBm Maximum
Group Delay <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models
Audio Distortion and Noise NA
Power Supply Module Requirements 40Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance NA
IC Type Acceptance NA
* Module Family Type Frequency
LNKC1800-D.2 Downlink 0.25 MHz Bandwidth 1805-1880 MHz
LNKC1800-D Downlink 1.25 MHz Bandwidth 1805-1880 MHz
LNKC1800-D5 Downlink 5 MHz Bandwidth 1805-1880 MHz
LNKC1800-D15 Downlink 15 MHz Bandwidth 1805-1880 MHz
LNKC1800-U.2 Uplink 0.25 MHz Bandwidth 1710-1785 MHz
LNKC1800-U Uplink 1.25 MHz Bandwidth 1710-1785 MHz
LNKC1800-U5 Uplink 5 MHz Bandwidth 1710-1785 MHz
LNKC1800-U15 Uplink 15 MHz Bandwidth 1710-1785 MHz

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 213

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKF100 LNKF100
MODULE SPECIFICATIONS*
Frequency Range (MHz) 136 - 157, 155 - 174
Downlink Frequency Range (MHz) NA
Uplink Frequency Range (MHz) NA
Bandwidth Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range NA
AGC Control Adjustment Range NA
RF Frequency Stability NA
Maximum RF Output Power +37 dBm
RF Output Power Range +20 dBm to +37 dBm
RF Output Power Variation +/- 1 dB
Output Power 1 NA
Output Power 2 NA
Output Power 3 NA
Input Dynamic Range -110 dBm to -30 dBml
Input Sensitivity Adjust Range -110 dBm to -50 dBm
Input Hysteresis 1 dB to 10 dB
Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3 NA
Noise Figure NA
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious -57 dBm Maximum
Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements 45 Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance NA
IC Type Acceptance NA
* Module Family Type Frequency
LNKF100-A1 25 KHz FM channels 136-157 MHz
LNKF100-A2 12.5 KHz FM channels 136-157 MHz
LNKF100-B1 25 KHz FM channels 155-174 MHz
LNKF100-B2 12.5 KHz FM channels 155-174 MHz
NA NA NA
NA NA NA
NA NA NA
NA NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 214

POWERWAVE LinkNet Convergence Platform









*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

LNKF800 LNKF800
MODULE SPECIFICATIONS*
Frequency Range (MHz) 806-824,851-869,896-901,935-940
Downlink Frequency Range (MHz) NA
Uplink Frequency Range (MHz) NA
Bandwidth Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range NA
AGC Control Adjustment Range NA
RF Frequency Stability Tracks input signal exactly
Maximum RF Output Power +38 dBm (+37 dBm for G2, H2 models)
RF Output Power Range +17 dBm to +38 dBm (+37 dBm)
RF Output Power Variation +/- 1 dB
Output Power 1
Output Power 2
Output Power 3
Input Dynamic Range -110 dBm to -30 dBml
Input Sensitivity Adjust Range -110 dBm to -50 dBm
Input Hysteresis 1 dB to 10 dB
Adjacent Channel Sensitivity 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3
Noise Figure
Transmit Duty Cycle Continuous
Transmit Spurious -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious -57 dBm Maximum
Group Delay <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements 45 Watts Maximum
RF Connectors SMA (50 ) Connectors on back of Chassis
Connections
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, Transmit
Configuration Options Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection
MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft) 2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs) 10
Operating Temperature Range (Celsius) -10C to +50
Operating Humidity Range 10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE*
FCC Type Acceptance H6M-OFR800, H6M-LNKF800
IC Type Acceptance 1541195685A, 1541196848A
* Module Family Type Frequency
LNKF800-A1 25 KHz FM channels 806-824 MHz
LNKF800-B1 25 KHz FM channels 851-869 MHz
LNKF800-C2 12.5 KHz FM channels 806-824 MHz
LNKF800-D2 12.5 KHz FM channels 851-869 MHz
LNKF800-G2 12.5 KHz FM channels 896-901 MHz
LNKF800-H2 12.5 KHz FM channels 935-940 MHz
NA NA NA
NA NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 215

POWERWAVE

In-Building and Outdoor DAS Products

Public Safety Networks
Title Part Number Page
Tap-In Signal Distribution Taps Tap-In 217
Coverage Products
Tap-In Signal Distribution Taps
216
POWERWAVE Tap-In Signal Distribution Taps

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Tap-In 1/2 Taps for Frequencies 100 MHz 520 MHz
1/2" Taps for Frequencies 100 MHz - 520 MHz
Model Number FCT5-12 FCT5-16 FCT5-20
Nominal Coupling Loss 12 dB 16 dB 20 dB
Insertion Loss & 150 MHz 0.7 dB 0.5 dB 0.3 dB
Line Input Power 15 W 15 W 15 W
5/8" Taps for Frequencies 100 MHz - 520 MHz
Model Number FCT7-12 FCT7-16 FCT7-20
Nominal Coupling Loss 12 dB 16 dB 20 dB
Insertion Loss & 150 MHz 0.7 dB 0.5 dB 0.3 dB
Line Input Power 15 W 15 W 15 W
1/2" Taps for Frequencies 300 MHz - 1000 MHz
Model Number CCT5-12 CCT5-16 CCT5-20
Nominal Coupling Loss 12 dB 16 dB 20 dB
Insertion Loss & 450 MHz 0.8 dB 0.5 dB 0.3 dB
Line Input Power 15 W 45 W 90 W
5/8" Taps for Frequencies 300 MHz - 1000 MHz
Model Number CCT7-12 CCT7-16 CCT7-20
Nominal Coupling Loss 12 dB 16 dB 20 dB
Insertion Loss & 450 MHz 0.8 dB 0.5 dB 0.3 dB
Line Input Power 15 W 45 W 90 W
1/2" Taps for Frequencies 800 MHz - 2000 MHz
Model Number PCT5-12 PCT5-16
Nominal Coupling Loss 12 dB 16 dB
Insertion Loss & 1.9 GHz 0.8 dB 0.5 dB
Line Input Power 15 W 45 W
5/8" Taps for Frequencies 800 MHz - 2000 MHz
Model Number PCT7-12 PCT7-16
Nominal Coupling Loss 12 dB 16 dB
Insertion Loss & 1.9 GMHz 0.8 dB 0.5 dB
Line Input Power 15 W 45 W

TAP-IN GENERAL SPECIFICATIONS
RF Output Impedance 50
Dimensions, HxWxD (in) 2 x 2 x 1.5
Output Connector TNC Female
Output Power (Maximum) 1 W
EXACT TAP-IN DIAMETER MEASUREMENT
Tap In Diameter in(mm) 1/2" Taps 0.58 (14.73)
Tap In Diameter in(mm) 5/8" Taps 0.83 (21)

Updated: Nov 2 2010 4:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 217

POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Title
Frequency
Band (UL)
Frequency Band
(DL)
Gain Adjustment
Range DL Part Number Page
Nexus FT Single
Band 700MHz for
Public Safety (PS)
and D block
PS: 788 to 805
MHz (includes
upper D block)
PS: 758 to 775
MHz (includes
upper D block)
45 - 70 dB RH700030/101 219

Coverage Products
Nexus FT Public Safety
218

POWERWAVE Nexus FT Single and Dual Band
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH700030/101 Nexus FT Single Band 700MHz for Public Safety (PS) and D
block
ELECTRICAL SPECIFICATIONS
Frequency Band UL PS: 788 to 805 MHz (includes upper D block)
Frequency Band DL PS: 758 to 775 MHz (includes upper D block)
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 45 - 70 dB
Gain Adjustment Range UL 35 - 60 dB
Gain Step Resolution 1dB
Band 1 Output Power at Antenna Port 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Instantaneous Bandwidth 17 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Type 110 - 230 VAC
Power Consumption 210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465x530x195 (18 x 20.9 x 8.3)
Weight kg(lbs) 23 kg (50.7 lbs)
RF Connectors 7/16 DIN Female
Optical Connectors FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +55C
Ingression Protection IP-65 (NEMA4)
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 15,27,90
Environment GR-36-CORE
EMC FCC CFR47 Part 15, 27
*Carrier Count Power Per Carrier Composite Power NA NA
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 31dBm 43dBm NA NA

Updated: Nov 2 2010 3:55PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 219

Title Dimension_HxWXD_mm_(ft) Weight kg (lbs) Part Number Page
Door Upgrade, Wide Band
Radio Head (WRH)
440 x 530 x 195 (15x19x8) <37 (82) RH004000/003 221
Triple Band
900/1800/2100HP
440 x 530 x 280 (1 5x19x11) <37 (82) RH621010 222
POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Coverage Products
Wide Band Radio Heads
220

POWERWAVE Wide Band Radio Heads
*All specifications subject to change.

Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

RH004000/003 Door Upgrade, Wide Band Radio Head (WRH) single band
850MHz, for upgrade of single band 2W 1900MHz WRH base
ELECTRICAL DATA*
Frequency UL Band 1 (MHz) N/A (base)
Frequency DL Band 1 (MHz) N/A (base)
Frequency UL Band 2 (MHz) 824-849
Frequency DL Band 2 (MHz) 869-894
Frequency UL Band 3 (MHz) N/A
Frequency DL Band 3 (MHz) N/A
Frequency UL Band 4 (MHz) N/A
Frequency DL Band 4 (MHz) N/A
Gain Adjustment Range (1dBsteps), 30 dB
Gain Step Resolution 1 dB
Max Absolute Delay <300 ns
Max Input Power in UL +13 dBm damaging level
Output Power DL, band 1, 4 carrier N/A
Output Power DL, band 1, 8 carrier N/A
Output Power DL, band 1, 16 carrier N/A
Output Power DL, band 2, 4 carrier 4CDMA, 26dBm
Output Power DL, band 2, 8 carrier 8 CDMA, 23dBm
Output Power DL, band 3, 4 carrier N/A
Output Power DL, band 3, 8 carrier N/A
Output Power DL, band 4, 4 carrier N/A
Output Power DL, band 4, 8 carrier N/A
Noise Figure (excluding fiber) 4 dB
Intermodulation band 1 N/A
Intermodulation band 2 N/A
Intermodulation band 3 N/A
Intermodulation band 4 N/A
MISCELLANEOUS SPECIFICATION*
Alarm Fault, LED and by remote control
Power Supply 115/230 VAC
Power Consumption <110 W
MECHANICAL DATA*
Dimension (HxWxD) mm(ft) 440 x 530 x 195 (15x19x8)
Weight kg (lbs) <22.5 (82)
RF Connection N-type female, duplexed service port,
ENVIRONMENTAL DATA*
Operating Temperature Celsius -25 to +55
Housing Specification NEMA 4 / IP65
Ingression Protection N/A

APPROVALS AND TESTS*
Safety EN 60950, ETL,
Environment ETS 300 019-2.4E
Regulatory Compliance EMC EN301 489-1
Regulatory Compliance Radio FCC Part 24, 22

Updated: May 4 2010 4:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 221

POWERWAVE Wide Band Radio Heads
*All specifications subject to change.

Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

RH621010 Triple Band 900/1800/2100HP
ELECTRICAL DATA*
Frequency UL Band 1 (MHz) GSM 900, 890-915
Frequency DL Band 1 (MHz) GSM 900, 935-960
Frequency UL Band 2 (MHz) GSM 1800, 1710-1785
Frequency DL Band 2 (MHz) GSM1800, 1805-1880
Frequency UL Band 3 (MHz) UMTS, 1920-1980
Frequency DL Band 3 (MHz) UMTS 2110-2170
Frequency UL Band 4 (MHz) N/A
Frequency DL Band 4 (MHz) N/A
Gain Adjustment Range (1dBsteps), 30 dB
Gain Step Resolution 2 dB
Max Absolute Delay <300 ns
Max Input Power in UL +13 dBm damaging level
Output Power DL, band 1, 4 carrier 21dBm/carrier
Output Power DL, band 1, 8 carrier 18 dBm/carrier
Output Power DL, band 2, 4 carrier 23 dBm/carrier
Output Power DL, band 2, 8 carrier 20 dBm/carrier
Output Power DL, band 3, 4 carrier 30 dBm/carrier
Output Power DL, band 3, 8 carrier 27 dBm/carrier
Output Power DL, band 4, 4 carrier N/A
Output Power DL, band 4, 8 carrier N/A
Noise Figure (excluding fiber) GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB
Intermodulation band 1 GSM 900, -36 dBm
Intermodulation band 2 GSM 1800, -30 dBm
Intermodulation band 3 N/A
Intermodulation band 4 N/A
MISCELLANEOUS SPECIFICATION*
Alarm Fault, LED and by remote control
Power Supply 115/230 VAC or 24/48 VDC
Power Consumption <425 W
MECHANICAL DATA*
Dimension (HxWxD) mm(ft) 440 x 530 x 280 (1 5x19x11)
Weight kg (lbs) <37 (82)
RF Connection N-type female or 7/16
ENVIRONMENTAL DATA*
Operating Temperature Celsius -25 to +55
Housing Specification NEMA 4 / IP67
Ingression Protection Lock

APPROVALS AND TESTS*
Safety EN 60950, ETL,
Environment ETS 300 019
Regulatory Compliance EMC EN301 489-1, TS125 113
Regulatory Compliance Radio ETS300 609-4, TS125 143

Updated: 2009-03-16 17:42:14Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 222

POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Title
Frequency Band
(UL)
Frequency
Band (DL)
Gain Adjustment
Range DL Part Number Page
Nexus FT Cover
Upgrade 850 MHz
Single Band
824 - 849 MHz 869 - 894 MHz 25 dB (45 - 70 dB) RH004002/001 226
Nexus FT Single
Band EGSM900
880-915 MHz 925-960 MHz 20 dB (45 65 dB) RH100020/101 227
Nexus FT Single
Band EGSM900
880-915 MHz 925-960 MHz 20 dB (45 65 dB) RH100020/211 228
Nexus FT Single
Band DCS1800
1710-1785 MHz 1805-1880 MHz 20 dB (45 65 dB) RH200020/101 229
Nexus FT Single
Band DCS1800
1710-1785 MHz 1805-1880 MHz 20 dB (45 65 dB) RH200020/211 230
Nexus FT Dual Band
1800/900
1710-1785, 880-
915 MHz
1805-1880, 925-
960 MHz
20 dB (45 65 dB) RH201022/101 231
Nexus FT Dual Band
1800/900
1710-1785, 880-
915 MHz
1805-1880, 925-
960 MHz
20 dB (45 65 dB) RH201022/211 232
Nexus FT 1900 MHz
Single Band
1850 1910 MHz
1930 - 1990
MHz
25 dB (45 70 dB) RH300020/101 233
Nexus FT 1900 MHz
Single Band
1850 1910 MHz
1930 - 1990
MHz
25 dB (45 70 dB) RH300020/211 234
Nexus FT Dual Band
PCS/Cellular
1850-1910, 824-
849 MHz
1930-1990, 869-
894 MHz
25 dB (45 70 dB) RH304022/101 235
Nexus FT Dual Band
PCS/Cellular
1850-1910, 824-
849 MHz
1930-1990, 869-
894 MHz
25 dB (45 70 dB) RH304022/211 236
Nexus FT Dual Band
PCS/AWS
1850-1910, 1710-
1755 MHz
1930-1990,
2110-2155 MHz
25 dB (45 70 dB) RH309022/101 237
Nexus FT Dual Band
PCS/AWS
1850-1910, 1710-
1755 MHz
1930-1990,
2110-2155 MHz
25 dB (45 70 dB) RH309022/211 238
Coverage Products
Nexus FT Single and Dual Band
223

POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Title
Frequency
Band (UL)
Frequency
Band (DL)
Gain Adjustment
Range DL Part Number Page
Nexus FT 1900 MHz
Including G-block
Single Band
1850 1915
MHz
1930 - 1995 MHz 25 dB (45 70 dB) RH330020/101 239
Nexus FT Dual Band
PCS/Cellular
Including G-block
1850-1915, 824-
849 MHz
1930-1995, 869-
894 MHz
25 dB (45 70 dB) RH334022/101 240
Nexus FT 850 MHz
Single Band
824 849 MHz 869 894 MHz 25 dB (45 70 dB) RH400020/101 241
Nexus FT 850 MHz
Single Band
824 849 MHz 869 894 MHz 25 dB (45 70 dB) RH400020/211 242
Nexus FT Single
Band 800iDEN
806 824 MHz 851 869 MHz 25 dB (45 70 dB) RH500020/101 243
Nexus FT Single
Band 800iDEN &
Public Safety
806 824 MHz 851 869 MHz 25 dB (45 70 dB) RH500020/211 244
Nexus FT Single
Band 2100MHz
UMTS
1920-1980 MHz 2110-2170 MHz 20 dB (45 65 dB) RH600020/101 245
Nexus FT Single
Band 2100MHz
UMTS
1920-1980 MHz 2110-2170 MHz 20 dB (45 65 dB) RH600020/211 246
Nexus FT Dual Band
EGSM900 &
WCDMA2100
1920-1980, 880-
915 MHz
2110-2170, 925-
960 MHz
20 dB (45 65 dB) RH601022/101 247
Nexus FT Dual Band
EGSM900 &
WCDMA2100
1920-1980, 880-
915 MHz
2110-2170, 925-
960 MHz
20 dB (45 65 dB) RH601022/211 248
Nexus FT Dual Band
DCS1800 &
WCDMA2100
1920-1980,
1710-1785 MHz
2110-2170, 1805-
1880 MHz
20 dB (45 65 dB) RH602022/101 249
Nexus FT Single
Band 700MHz for
Public Safety (PS)
and D block
PS: 788 to 805
MHz (includes
upper D block)
PS: 758 to 775
MHz (includes
upper D block)
45 - 70 dB RH700030/101 250
Nexus FT Dual Band
700MHz for Public
Safety (PS) and D
block /800iDEN
788 to 805 MHz
(includes upper
D block), 806 -
824 MHz
758 to 775 MHz
(includes upper D
block), 851 - 869
MHz
25 dB (45 70 dB) RH705032/101 251
Coverage Products
Nexus FT Single and Dual Band
224

POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Title
Frequency Band
(UL)
Frequency
Band (DL)
Gain Adjustment
Range DL Part Number Page
Nexus FT Single Band
700MHz LTE (A,B,C AND
UPPER C BLOCKS)
lower A, B and C
blocks (698MHz-
716MHz), upper C
block (776MHz-
787MHz)
A, B and C blocks
(728MHz-
746MHz), upper
C block (746MHz-
757MHz)
45 - 70 dB RH770020/101 252
Nexus FT 700 MHz MIMO
lower A, B and C
blocks (698MHz-
716MHz), upper C
block (776MHz-
787MHz)
A, B and C blocks
(728MHz-
746MHz), upper
C block (746MHz-
757MHz)
25 dB (45 70 dB) RH777722/251 253
Nexus FT Dual Band
900iDEN/800iDEN&Public
Safety
806-824, 896-902
MHz
851-869, 935-941
MHz
25 dB (45 70 dB) RH805022/101 254
Nexus FT Dual Band
900iDEN/800iDEN&Public
Safety
806-824, 896-902
MHz
851-869, 935-941
MHz
25 dB (45 70 dB) RH805022/211 255
Nexus FT Single Band
AWS
1710-1755 MHz 2110-2155 MHz 25 dB (45 70 dB) RH900020/101 256
Nexus FT Single Band
AWS
1710-1755 MHz 2110-2155 MHz 25 dB (45 70 dB) RH900020/211 257
Nexus FT 2100 MHz
AWS MIMO
1710-1755 MHz 2110-2155 MHz 25 dB (45 70 dB) RH909022/251 258

Coverage Products
Nexus FT Single and Dual Band
225

POWERWAVE Nexus FT Single and Dual Band
Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor port.

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH004002/001 Nexus FT Cover Upgrade 850 MHz Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 824 - 849 MHz
Frequency Band DL 869 - 894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 - 70 dB)
Gain Adjustment Range UL 25 dB (35 - 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite Power 43 dBm
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-13 dBm (FCC)
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm (FCC)
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 156 (18 x 20.9 x 6.1)
Weight kg(lbs) < 22 kg (48 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEM A 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 part 22
Environment ETS 300 019
EMC EN 301 489
Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40 43 29 32
4 37 43 29 35
8 34 43 29 38
16 31 43 28 40

Updated: 2009-03-10 12:29:47Z Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 226

POWERWAVE Nexus FT Single and Dual Band
RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH100020/101 Nexus FT Single Band 900MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 880-915 MHz
Frequency Band DL 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)
Instantaneous Bandwidth 35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE]
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by Remote Control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg. (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETS 300 609-4, TS 25.143 , TS 36.143
Environment ETS 300 019
EMC EN 301 489
*Carrier Count EGSM900 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 29dBm 32dBm NA NA
4 29dBm 35dBm NA NA
8 29dBm 38dBm NA NA
16 28dBm 40dBm NA NA

Updated: Aug 25 2010 8:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 227

POWERWAVE Nexus FT Single and Dual Band
RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN
connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH100020/211 Nexus FT Single Band 900MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 880-915 MHz
Frequency Band DL 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)
Instantaneous Bandwidth 35 MHz
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by Remote Control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg. (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETS 300 609-4
Environment ETS 300 019
EMC EN 301 489
*Carrier Count EGSM900 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 29dBm 32dBm NA NA
4 29dBm 35dBm NA NA
8 29dBm 38dBm NA NA
16 28dBm 40dBm NA NA

Updated: Nov 18 2010 6:55AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 228

POWERWAVE Nexus FT Single and Dual Band
RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH200020/101 Nexus FT Single Band 1800MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1785 MHz
Frequency Band DL 1805-1880 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)
Instantaneous Bandwidth 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by Remote Control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg. (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETS 300 609-4, TS 25.143 , TS 36.143
Environment ETS 300 019
EMC EN 301 489
*Carrier Count DCS1800 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 35dBm 38dBm NA NA
4 34dBm 40dBm NA NA
8 31dBm 40dBm NA NA
16 28dBm 40dBm NA NA

Updated: Nov 18 2010 6:57AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 229

POWERWAVE Nexus FT Single and Dual Band
RH200020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN
connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH200020/211 Nexus FT Single Band 1800MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1785 MHz
Frequency Band DL 1805-1880 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)
Instantaneous Bandwidth 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by Remote Control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg. (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETS 300 609-4
Environment ETS 300 019
EMC EN 301 489
*Carrier Count DCS1800 Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 35dBm 38dBm NA NA
4 34dBm 40dBm NA NA
8 31dBm 40dBm NA NA
16 28dBm 40dBm NA NA

Updated: Dec 13 2010 3:10AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 230

POWERWAVE Nexus FT Single and Dual Band
RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH201022/101 Nexus FT Dual Band 1800/900 MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1785, 880-915 MHz
Frequency Band DL 1805-1880, 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Output Power DL
Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Output Power DL 2
Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETSI EN 300 609-4
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power DCS1800 Power Per Carrier DCS1800 Composite Power
2 29dBm 32dBm 35dBm 38dBm
4 29dBm 35dBm 34dBm 40dBm
8 29dBm 38dBm 31dBm 40dBm
16 28dBm 40dBm 28dBm 40dBm
NA NA NA

Updated: Dec 13 2010 3:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 231

POWERWAVE Nexus FT Single and Dual Band
RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each
band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH201022/211 Nexus FT Dual Band 1800/900 MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1785, 880-915 MHz
Frequency Band DL 1805-1880, 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Output Power DL
Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Output Power DL 2
Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETSI EN 300 609-4
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power DCS1800 Power Per Carrier DCS1800 Composite Power
2 29dBm 32dBm 35dBm 38dBm
4 29dBm 35dBm 34dBm 40dBm
8 29dBm 38dBm 31dBm 40dBm
16 28dBm 40dBm 28dBm 40dBm
NA NA NA

Updated: Dec 13 2010 3:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 232

POWERWAVE Nexus FT Single and Dual Band
RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH300020/101 Nexus FT 1900 MHz Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850 1910 MHz
Frequency Band DL 1930 - 1990 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
16 31dBm 43dBm NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 233

POWERWAVE Nexus FT Single and Dual Band
RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH300020/211 Nexus FT 1900 MHz Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850 1910 MHz
Frequency Band DL 1930 - 1990 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
16 31dBm 43dBm NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 234

POWERWAVE Nexus FT Single and Dual Band
RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH304022/101 Nexus FT Dual Band PCS/Cellular
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 824-849 MHz
Frequency Band DL 1930-1990, 869-894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth 65MHz (PCS), 25MHz (Cellular)
Intermodulation 9KHz - 1 GHz <-13dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 24, FCC part 22
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA
NA NA

Updated: Nov 1 2010 6:14PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 235

POWERWAVE Nexus FT Single and Dual Band
RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH304022/211 Nexus FT Dual Band PCS/Cellular
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 824-849 MHz
Frequency Band DL 1930-1990, 869-894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 24, FCC part 22
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Nov 1 2010 6:14PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 236

POWERWAVE Nexus FT Single and Dual Band
RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH309022/101 Nexus FT Dual Band PCS/AWS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 1710-1755 MHz
Frequency Band DL 1930-1990, 2110-2155 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2 +43 dBm (2100 MHz, Downlink , Composite)*
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 24, FCC part 27
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Nov 1 2010 7:02PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 237

POWERWAVE Nexus FT Single and Dual Band
RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH309022/211 Nexus FT Dual Band PCS/AWS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 1710-1755 MHz
Frequency Band DL 1930-1990, 2110-2155 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2 +43 dBm (2100 MHz, Downlink , Composite)*
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 24, FCC part 27
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Nov 1 2010 7:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 238

POWERWAVE Nexus FT Single and Dual Band
RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH330020/101 Nexus FT 1900 MHz Including G-block Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850 1915 MHz
Frequency Band DL 1930 - 1995 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm
Instantaneous Bandwidth 65MHz
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
16 31dBm 43dBm NA NA

Updated: Jan 6 2010 2:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 239

POWERWAVE Nexus FT Single and Dual Band
RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH334022/101 Nexus FT Dual Band PCS/Cellular Including G-block
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1915, 824-849 MHz
Frequency Band DL 1930-1995, 869-894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2 +43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth 65MHz (PCS), 25MHz (Cellular)
Intermodulation 9KHz - 1 GHz <-13dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 24, FCC part 22
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA
NA NA

Updated: Nov 1 2010 7:03PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 240

POWERWAVE Nexus FT Single and Dual Band
RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH400020/101 Nexus FT 850 MHz Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 824 849 MHz
Frequency Band DL 869 894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 22
Environment
EMC
*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm 29dBm 32dBm
4 37dBm 43dBm 29dBm 35dBm
8 34dBm 43dBm 29dBm 38dBm
16 31dBm 43dBm 28dBm 40dBm

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 241

POWERWAVE Nexus FT Single and Dual Band
RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH400020/211 Nexus FT 850 MHz Single Band
ELECTRICAL SPECIFICATIONS
Frequency Band UL 824 849 MHz
Frequency Band DL 869 894 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum Composite power 43 dBm
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 22
Environment
EMC
*Carrier Count Power Per Carrier FCC Composite Power FCC Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm 29dBm 32dBm
4 37dBm 43dBm 29dBm 35dBm
8 34dBm 43dBm 29dBm 38dBm
16 31dBm 43dBm 28dBm 40dBm

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 242

POWERWAVE Nexus FT Single and Dual Band
RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH500020/101 Nexus FT Single Band 800iDEN
ELECTRICAL SPECIFICATIONS
Frequency Band UL 806 824 MHz
Frequency Band DL 851 869 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (45 70 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port +43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 15, Part 90
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Nov 17 2009 10:06AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 243

POWERWAVE Nexus FT Single and Dual Band
RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH500020/211 Nexus FT Single Band 800iDEN&Public Safety
ELECTRICAL SPECIFICATIONS
Frequency Band UL 806 824 MHz
Frequency Band DL 851 869 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (45 70 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port +43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR 47 Part 15, Part 90
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 244

POWERWAVE Nexus FT Single and Dual Band
RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH600020/101 Nexus FT Single Band 2100MHz UMTS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1920-1980 MHz
Frequency Band DL 2110-2170 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum composite power +43dBm*
Instantaneous Bandwidth 60 MHz
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ESTI EN 301 908-11
Environment ETS 300 019
EMC ETS 300 489-1
*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Dec 13 2010 3:21AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 245

POWERWAVE Nexus FT Single and Dual Band
RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH600020/211 Nexus FT Single Band 2100MHz UMTS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1920-1980 MHz
Frequency Band DL 2110-2170 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum composite power +43dBm*
Instantaneous Bandwidth 60 MHz
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ESTI EN 301 908-11
Environment ETS 300 019
EMC ETS 300 489-1
*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Dec 13 2010 3:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 246

POWERWAVE Nexus FT Single and Dual Band
RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH601022/101 Nexus FT Dual Band 900 and 2100 MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1920-1980, 880-915 MHz
Frequency Band DL 2110-2170, 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Output Power DL Maximum composite power 2100 MHz UMTS +43dBm*
Output Power DL 2
Maximum Composite Power +40dBm applicable for 900 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETSI EN 300 609-4 and EN 301 908-11
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power WCDMAS 2100 Power Per
Carrier
WCDMAS 2100 Composite
Power
2 29dBm 32dBm 40dBm 43dBm
4 29dBm 35dBm 37dBm 43dBm
8 29dBm 38dBm 34dBm 43dBm
16 28dBm 40dBm NA NA
NA NA NA

Updated: Jan 10 2011 11:04AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 247

POWERWAVE Nexus FT Single and Dual Band
RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each
band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH601022/211 Nexus FT Dual Band EGSM900 & WCDMA2100
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1920-1980, 880-915 MHz
Frequency Band DL 2110-2170, 925-960 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Output Power DL Maximum composite power WCDMA2100 +43dBm*
Output Power DL 2 Maximum composite power EGSM900 +40 dBm*
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETSI EN 300 609-4 and EN 301 908-11
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
*Carrier Count EGSM900 Power Per Carrier EGSM900 Composite Power WCDMAS 2100 Power Per
Carrier
WCDMAS 2100 Composite
Power
2 29dBm 32dBm 40dBm 43dBm
4 29dBm 35dBm 37dBm 43dBm
8 29dBm 38dBm 34dBm 43dBm
16 28dBm 40dBm NA
NA NA

Updated: Nov 1 2010 6:12PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 248

POWERWAVE Nexus FT Single and Dual Band
RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RH602022/101 Nexus FT Dual Band 1800 and 2100 MHz
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1920-1980, 1710-1785 MHz
Frequency Band DL 2110-2170, 1805-1880 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 20 dB (45 65 dB)
Gain Adjustment Range UL 20 dB (35 55 dB)
Gain Step Resolution 1 dB
Output Power DL Maximum composite power 2100 MHz UMTS +43dBm*
Output Power DL 2
Maximum Composite Power +40dBm applicable for 1800 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)
Instantaneous Bandwidth Full Band
Intermodulation 9KHz - 1 GHz <-36 dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-30 dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25 C to +55 C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio ETSI EN 300 609-4 and EN 301 908-11
Environment ETS 300 019
EMC ETS 300 489-1
*Carrier Count DCS1800 Power Per Carrier DCS1800 Composite Power WCDMA 2100 Power Per
Carrier
WCDMA 2100 Composite Power
2 35dBm 38dBm 40dBm 43dBm
4 34dBm 40dBm 37dBm 43dBm
8 31dBm 40dBm 34dBm 43dBm
12 29dBm 40dBm 32dBm 43dBm

Updated: Dec 13 2010 3:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 249

POWERWAVE Nexus FT Single and Dual Band
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH700030/101 Nexus FT Single Band 700MHz for Public Safety (PS) and D
block
ELECTRICAL SPECIFICATIONS
Frequency Band UL PS: 788 to 805 MHz (includes upper D block)
Frequency Band DL PS: 758 to 775 MHz (includes upper D block)
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 45 - 70 dB
Gain Adjustment Range UL 35 - 60 dB
Gain Step Resolution 1dB
Band 1 Output Power at Antenna Port 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Instantaneous Bandwidth 17 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Type 110 - 230 VAC
Power Consumption 210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465x530x195 (18 x 20.9 x 8.3)
Weight kg(lbs) 23 kg (50.7 lbs)
RF Connectors 7/16 DIN Female
Optical Connectors FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +55C
Ingression Protection IP-65 (NEMA4)
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 15,27,90
Environment GR-36-CORE
EMC FCC CFR47 Part 15, 27
*Carrier Count Power Per Carrier Composite Power NA NA
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 31dBm 43dBm NA NA

Updated: Nov 2 2010 3:55PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 250

POWERWAVE Nexus FT Single and Dual Band
RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH705032/101 Nexus FT Dual Band 700MHz for Public Safety (PS) and D
block /800iDEN
ELECTRICAL SPECIFICATIONS
Frequency Band UL 788 to 805 MHz (includes upper D block), 806 - 824 MHz
Frequency Band DL 758 to 775 MHz (includes upper D block), 851 - 869 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth 17MHZ (700 PS)
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 15, FCC part 90
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Oct 28 2010 4:15PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 251

POWERWAVE Nexus FT Single and Dual Band
Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH770020/101 Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C
BLOCKS)
ELECTRICAL SPECIFICATIONS
Frequency Band UL lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)
Frequency Band DL A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 45 - 70 dB
Gain Adjustment Range UL 35 - 60 dB
Gain Step Resolution 1dB
Band 1 Output Power at Antenna Port 43 dBm
Instantaneous Bandwidth Upper Band 11 MHz, lower Band 18 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Type 110 - 230 VAC
Power Consumption 210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465x530x195 (18 x 20.9 x 8.3)
Weight kg(lbs) 23 kg (50.7 lbs)
RF Connectors 7/16 DIN Female
Optical Connectors FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -25C to +55C
Ingression Protection IP-65 (NEMA4)
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 15,27,90
Environment GR-36-CORE
EMC FCC CFR47 Part 15, 27
*Carrier Count Power Per Carrier Composite Power NA NA
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 31dBm 43dBm NA NA

Updated: Mar 29 2010 8:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 252

POWERWAVE Nexus FT Single and Dual Band
RH777722/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH777722/251 Nexus FT 700 MHz MIMO
ELECTRICAL SPECIFICATIONS
Frequency Band UL lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)
Frequency Band DL A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (700 MHz, Downlink , Composite Channel A)
Output Power DL 2 +43 dBm (700 MHz, Downlink , Composite Channel B)
Instantaneous Bandwidth Upper Band 11 MHz, lower Band 18 MHz
Intermodulation 9KHz - 1 GHz <-13dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR47 Parts 15,27,90
Environment
EMC FCC CFR47 Part 15, 27,90
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 31dBm 43dBm NA
NA NA

Updated: Apr 1 2011 12:04PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 253

POWERWAVE Nexus FT Single and Dual Band
RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH805022/101 Nexus FT Dual Band 900iDEN/800iDEN&Public Safety
ELECTRICAL SPECIFICATIONS
Frequency Band UL 806-824, 896-902 MHz
Frequency Band DL 851-869, 935-941 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (iDEN800, Downlink , Quad BR)
Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 15, FCC part 90
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Nov 1 2010 6:46PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 254

POWERWAVE Nexus FT Single and Dual Band
RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH805022/211 Nexus FT Dual Band 900iDEN/800iDEN&Public Safety
ELECTRICAL SPECIFICATIONS
Frequency Band UL 806-824, 896-902 MHz
Frequency Band DL 851-869, 935-941 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm (iDEN800, Downlink , Quad BR)
Output Power DL 2 +43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth NA
Intermodulation 9KHz - 1 GHz NA
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 15, FCC part 90
Environment ETS 300 019 -2.4E
EMC ETS 300 489-1
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA
NA NA NA

Updated: Nov 1 2010 7:02PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 255

POWERWAVE Nexus FT Single and Dual Band
RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH900020/101 Nexus FT Single Band AWS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1755 MHz
Frequency Band DL 2110-2155 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum composite power +43dBm*
Instantaneous Bandwidth 45 MHz
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 27
Environment ETS 300 019
EMC ETS 300 489-1
*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Jun 21 2010 7:24PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 256

POWERWAVE Nexus FT Single and Dual Band
RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH900020/211 Nexus FT Single Band AWS
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1755 MHz
Frequency Band DL 2110-2155 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Band 1 Output Power at Antenna Port Maximum composite power +43dBm*
Instantaneous Bandwidth 45 MHz
Intermodulation 9KHz - 1 GHz <-13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI NA
Alarm LED and by remote control
Power Supply Type 115/230 VAC
Power Consumption 210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg(lbs) < 25 kg (55 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65/NEMA4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC Part 27
Environment ETS 300 019
EMC ETS 300 489-1
*Carrier Count Power Per Carrier Composite Power Power Per Carrier ETSI Composite Power ETSI
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 32dBm 43dBm NA NA

Updated: Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 257

POWERWAVE Nexus FT Single and Dual Band
RH909022/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH909022/251 Nexus FT 2100 MHz AWS MIMO
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1710-1755 MHz
Frequency Band DL 2110-2155 MHz
Fiber Link Budget 10 dBo
Gain Adjustment Range DL 25 dB (45 70 dB)
Gain Adjustment Range UL 25 dB (35 60 dB)
Gain Step Resolution 1 dB
Output Power DL +43 dBm ( Downlink , Composite Channel A)
Output Power DL 2 +43 dBm (Downlink , Composite Channel B)
Instantaneous Bandwidth 45 MHz
Intermodulation 9KHz - 1 GHz <-13dBm
Intermodulation 1GHz - 12.75 GHz ETSI <-13dBm
Alarm LED and by remote control
Power Supply Options 115/230 VAC
Power Consumption 420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg(lbs) < 44 kg (96 lbs)
RF Connectors 7/16 DIN female
Optical Connectors FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range - 25C to + 55C
Ingression Protection IP65 / NEMA 4
APPROVALS AND TESTS
Safety UL, EN 60950, ETL
Radio FCC CFR47 Parts 15,27,90
Environment ETD300 489-1
EMC FCC CFR47 Part 15, 27,90
Carrier Count * Power Per Carrier Composite Power Power Per Carrier Composite Power
2 40dBm 43dBm NA NA
4 37dBm 43dBm NA NA
8 34dBm 43dBm NA NA
12 31dBm 43dBm NA
NA NA

Updated: Oct 19 2011 6:56PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 258

POWERWAVE

In-Building and Outdoor DAS Products

Commercial
Title
Frequency Band
(UL)
Frequency
Band (DL)
Gain Adjustment
Range DL Part Number Page
Nexus Dual Band
Repeaters
1850-1910,
824-849 MHz
1930-1990,
869-894 MHz
25 (45 - 70) dB RH304022/03A 260
Nexus Dual Band
Repeaters
1850-1910,
806-824 MHz
1930-1990,
851-869 MHz
25 (45 - 70) dB RH305022/03A 261
Nexus Dual Band
Repeaters
1850-1910,
896-902 MHz
1930-1990,
935-941 MHz
25 (45 - 70) dB RH308022/03A 262
Coverage Products
Nexus FT Rack Mounts
259

POWERWAVE Nexus FT Rack Mounts
Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band.

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH304022/03A Nexus Dual Band Repeaters
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 824-849 MHz
Frequency Band DL 1930-1990, 869-894 MHz
Fiber Link Budget n/a
Gain Adjustment Range DL 25 (45 - 70) dB
Gain Adjustment Range UL 25 (35 - 60) dB
Gain Step Resolution 1 dB
Output Power DL 20 W
Output Power DL 2 20 W
Instantaneous Bandwidth 60 / 25 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Options 110 - 230 VAC
Power Consumption 420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg(lbs) 30 (66)
RF Connectors SMA (Donor), N (Service)
Optical Connectors n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range 0C to +55C
Ingression Protection IP50
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 22, 24
Environment ETS 300 019
EMC FCC CFR47 Part 22, 24
Carrier Count Power Per Carrier Composite Power
2 40 dBm 43 dBm
4 37 dBm 43 dBm
8 34 dBm 43 dBm
12 32 dBm 43 dBm

Updated: Nov 10 2010 6:41PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 260

POWERWAVE Nexus FT Rack Mounts
Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band.

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH305022/03A Nexus Dual Band Repeaters
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 806-824 MHz
Frequency Band DL 1930-1990, 851-869 MHz
Fiber Link Budget n/a
Gain Adjustment Range DL 25 (45 - 70) dB
Gain Adjustment Range UL 25 (35 - 60) dB
Gain Step Resolution 1 dB
Output Power DL 20 W
Output Power DL 2 20 W
Instantaneous Bandwidth 60 / 18 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Options 110 - 230 VAC
Power Consumption 420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg(lbs) 30 (66)
RF Connectors SMA (Donor), N (Service)
Optical Connectors n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range 0 to +55C
Ingression Protection IP50
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 24, 90
Environment ETS 300 019
EMC FCC CFR47 Parts 24, 90
Carrier Count Power Per Carrier Composite Power
2 40 dBm 43 dBm
4 37 dBm 43 dBm
8 34 dBm 43 dBm
12 32 dBm 43 dBm

Updated: Nov 10 2010 6:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 261

POWERWAVE Nexus FT Rack Mounts
Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band.

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RH308022/03A Nexus Dual Band Repeaters
ELECTRICAL SPECIFICATIONS
Frequency Band UL 1850-1910, 896-902 MHz
Frequency Band DL 1930-1990, 935-941 MHz
Fiber Link Budget n/a
Gain Adjustment Range DL 25 (45 - 70) dB
Gain Adjustment Range UL 25 (35 - 60) dB
Gain Step Resolution 1 dB
Output Power DL 20 W
Output Power DL 2 20 W
Instantaneous Bandwidth 60 / 6 MHz
Intermodulation 9KHz - 1 GHz -13 dBm
Intermodulation 1GHz - 12.75 GHz ETSI -13 dBm
Alarm LED/SNMP
Power Supply Options 110 - 230 VAC
Power Consumption 420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg(lbs) 30 (66)
RF Connectors SMA (Donor), N (Service)
Optical Connectors n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range 0 to +55
Ingression Protection IP50
APPROVALS AND TESTS
Safety UL60950-1
Radio FCC CFR47 Parts 24, 90
Environment ETS 300 019
EMC FCC CFR47 Parts 24, 90
Carrier Count Power Per Carrier Composite Power
2 40 dBm 43 dBm
4 37 dBm 43 dBm
8 34 dBm 43 dBm
12 32 dBm 43 dBm

Updated: Nov 10 2010 6:41PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 262
Powerwaves IP/SNML/GPS (ISG) communication interface
module provides remote operation, control and monitoring
of Powerwaves repeater networks reducing the need for
site visits through a very cost-effective and reliable IP
and SNMP connection. The ISG interface modules improve
the repeaters remote access offering Ethernet and packet
switched connections and a Web craft terminal. The ISG
interface can manage numerous repeaters and when
integrated with Powerwaves NetWay

Vision, offers a
complete solution for network management.
Repeater Remote
Management
Power wave

POWERWAVE

IP/SNMP/GPS Repeater Remote Management Interface
Title Power Output
Modem
Frequencies GPS Receiver Part Number Page
Base Station
Management
Interface
N/A
698 to 1000
MHz, 1700 to
2000 MHz
N/A
UA115 04/84,
UA115 04/85
265
IP/SNMP/GPS:
Ethernet Interface
Upgrade Option
+/- 6.5 VDC @ 2A
(supplied by repeater)
N/A N/A UA107 62/1 267
IP/SNMP/GPS:
900/1800 Dual Mode
Wireless GPRS
Packet Data Interface
+/- 6.5 VDC @ 2A
(supplied by repeater)
900 / 1800 MHz
12 channel L1 (1575.42
MHz), position accuracy ~
5 m
UA107 62/2 268
IP/SNMP/GPS:
850/1900 Dual Mode
Wireless CDMA
Packet Data Interface
+/- 6.5 VDC @ 2A
(supplied by repeater)
850 / 1900 MHz
12 channel L1 (1575.42
MHz), position accuracy ~
5 m
UA107 62/3 269
IP/SNMP/GPS:
850/1900 Dual Mode
Wireless GPRS
Packet Data Interface
+/- 6.5 VDC @ 2A
(supplied by repeater)
850 / 1900 MHz
12 channel L1 (1575.42
MHz), position accuracy ~
5 m
UA107 62/4 270
Coverage Products
Repeater Remote Management
264

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Coverage Solutions
UA115 04/84, UA115 04/85


Introduction:
The Base Station Management Interface (BSMI) is multi-band power limiter and monitor. It is a component of head-end fiber
distributed antenna system (DAS) systems, and provides the interface and level management of the DAS donor RF signals. The
BSMI is typically used with the Powerwave Fiber Base Unit (FBU) which converts optical to RF signals.
Features:

G Provides downlink load balancing and power limiting for DAS (distributed antenna systems) with multi-base station or multi-
operator configurations
G Technology agnostic - can be used to support all commercial 2G/3G/4G technologies
G Each module supports 4 independent uplink and downlink paths
G Two paths UL/DL(uplink and downlink) are dedicated for 698MHz-1GHz and two paths are dedicated for 1700-2200 MHz
G Both UL and DL paths can be adjusted from 0-15dB in 1dB steps
G IP42 rated with -10C to +45C operating range
G Maximum DL RF input is +40dBm and maximum uplink input is 0 dBm
G Two Ethernet interfaces support local and remote access
G Supports SNMP traps and is fully supported with Netway Vision
G Level adjustments can be made locally or remotely-reducing site trips
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Oct 27 2011 8:22AM
265

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Coverage Solutions
UA115 04/84, UA115 04/85





ELECTRICAL SPECIFICATIONS
Frequency
698 to 1000 MHz (2 UL/DL paths)

1700 to 2200 MHz (2 UL/DL paths)

Number of RF Ports
4 Uplink- 8 SMA Female

4 Downlink -4 N Female/4 SMA Female
VSWR (All Ports) 1.5:1 Maximum (50 Ohm Impedance)
Downlink RF Input (RMS) No Damage + 45 dBm Maximum
Uplink RF Input (RMS) No Damage + 15 dBm Maximum
Downlink/Uplink Measurement Accuracy +/- 1,0 dB
Uplink/Downlink Measurement Range - To 15 dB in 1dB steps
Downlink to Uplink Isolation 140 dB Minimum
Downlink power Measurement
Bandwidth
Full Bandwidth High or Low Band
Uplink Power Measurement Bandwidth 200Hz
MECHANICAL SPECIFICATIONS
Form Factor 1 Rack Unit
Maximum Dimensions (Including
connector Protrusions)
Bottom
Dimensions, HxWxD, mm (in) 482.6x419.4x43.7mm(19.0x16.51x1.7)
Weight, with brackets, kg (lbs) 2.3 (5.0)
Operating Temperature -10 to +50C
Maximum Power Dissipation 40 Watts
Packing weight, kg (lbs) 27.3 (60.0)
REGULATORY APPROVALS
EMI
FCC Part 15, Class B

FCC Part 22,24,90

EN60000-6-3 (Radiated Up to 10 GHz

EN55022
EMC
IEC 6100-4-2,3,4,6

IEC 60950-1

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Oct 27 2011 8:22AM
266

POWERWAVE Remote Repeater and DAS Management
Optional kit that provides wired Ethernet packet data interface for communication with Powerwaves Netway Vision (NWV)
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


UA107 62/1 IP/SNMP/GPS: Ethernet Interface Upgrade Option
ELECTRICAL SPECIFICATIONS
Power Input +6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies NA
GPS Receiver NA
Battery Backup 10 minute minimum (for communications)
Battery Change Options Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range -25C to +55C ( repeater ambient temps)
Repeater Interface Use existing communication ports
Modem and GPS Interface NA
Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS) NA
Repeater Management
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode IP Ethernet
Networks Supported NA
Fallback Circuit Switched Mode NA
Northbound Traffic SNMP v1, v2c and http
Wireless Modem Type NA
Network Management NWM 3.2.2 and greater; local web interface
Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: May 11 2010 2:10AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 267

POWERWAVE Remote Repeater and DAS Management
Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves NetWay Vision (NWV) and automated location tuning via GPS
for moving repeaters
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


UA107 62/2 IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data
Interface
ELECTRICAL SPECIFICATIONS
Power Input +6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies 900 / 1800 MHz
GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup 10 minute minimum (for communications)
Battery Change Options Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range -25C to +55C ( repeater ambient temps)
Repeater Interface Use existing communication and antenna ports
Modem and GPS Interface Mezzanine Board
Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007)
PROCESSING
Automated Location Based Tuning (via GPS) Up to 12 Repeaters
Repeater Management
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode GPRS and IP Ethernet
Networks Supported NA
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Wireless Modem Type Wavecom Quik series Extended (Q24 EX001)
Network Management NWM 3.2.2 and greater; local web interface
Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: May 11 2010 2:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 268

POWERWAVE Remote Repeater and DAS Management
Optional kit that provides CDMA wireless packet data interface for communication with Powerwaves NetWay Vision (NWV)
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


UA107 62/3 IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet
Data Interface
ELECTRICAL SPECIFICATIONS
Power Input +6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies 850 / 1900 MHz
GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup 10 minute minimum (for communications)
Battery Change Options Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range -25C to +55C ( repeater ambient temps)
Repeater Interface Use existing communication and antenna ports
Modem and GPS Interface Mezzanine Board
Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS) Up to 12 Repeaters
Repeater Management
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode CDMA2000 1XRTT and IP ethernet
Networks Supported Verizon
Fallback Circuit Switched Mode NA
Northbound Traffic SNMP v1, v2c and http
Wireless Modem Type Wavecom Quik series (Q2438)
Network Management NWM 3.2.2 and greater; local web interface
Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: May 11 2010 2:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 269

POWERWAVE Remote Repeater and DAS Management
Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves Netway Vision (NWV)
ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.


UA107 62/4 IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data
Interface
ELECTRICAL SPECIFICATIONS
Power Input +6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies 850 / 1900 MHz
GPS Receiver 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup 10 minute minimum (for communications)
Battery Change Options Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in) 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range -25C to +55C ( repeater ambient temps)
Repeater Interface Use existing communication and antenna ports
Modem and GPS Interface Mezzanine Board
Operational Conditions ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS) Up to 12 Repeaters
Repeater Management
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode GPRS and IP Ethernet
Networks Supported NA
Fallback Circuit Switched Mode GSM
Northbound Traffic SNMP v1, v2c and http
Wireless Modem Type Wavecom Quik series Extended (Q24 EX001)
Network Management NWM 3.2.2 and greater; local web interface
Maintenance Access (Local Craft Port) 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: May 11 2010 2:15AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 270
Antenna Products
Power wave
A Tradition of Quality Since 1946
Powerwave delivers antennas to customers around the
world, offering solutions for all mobile telephony standards.
Our designers and engineers build on years of experience;
we have developed and manufactured top-quality antennas
since 1946 from our core platform formerly under the
industry leading Allgon brand name.
State of the Art Antennas are the Key
to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer
network operators fast and successful roll-out of next
generation networks with excellent RF-performance. Our
antennas are designed to overcome 3G and 4G deployment
challenges, such as space and installation issues as well
as various co-siting scenarios. The Powerwave broadband
antenna technology simplifes logistics for network
operators active in multiple markets.
Broadband
Single and Dual Band
iRET
iDiplexer
Remote Electrical Tilt (RET)
Indoor
Clean Site

Solutions
Mounting Solutions
The Powerwave broadband antenna design is based on
a patented stacked aperture-coupled patch technology,
which provides high isolation performance and a wide
voltage standing wave ratio (VSWR) bandwidth. The
antennas have superior radiation patterns due to a unique
refector design that provide a very small variation of the
-3dB horizontal beam width over the frequency band as
well as a high front-to-back ratio. Powerwave broadband
antennas come with remote electrical tilt (RET) in AISG 1.1
and AISG 2.0, and manually adjustable electrical tilt (MET)
for tuning fexibility of tilt angles. This design ensures the
highest possible cross-polar discrimination value.
Broadband Antennas
Power wave

POWERWAVE

Single Broadband Antennas
Cross Polarized Page
High Broadband Cross Polarized Antennas, 1710-2170 MHz 274
Low Broadband Cross Polarized Antennas, 806-960 MHz 305
Low Broadband Cross Polarized Antennas, 698-894 MHz 343

Dual Broadband Antennas
Cross Polarized Page
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz 351
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz 361

Triple Broadband Antennas
Cross Polarized Page
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz 368
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz 375
Broadband Antennas
Broadband Antennas
273

POWERWAVE

Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 18.1/16 0 1.3m (4'3") 5701.00 276
65 18.1/16 2 1.3m (4'3") 5701.02 277
65 18.1/16 6 1.3m (4'3") 5701.06 278
65 18.1/16.2 0-8 1.3m (4'3") 5721.00 279
65 18.1/16 2-10 1.3m (4'3") 5721.02 280
65 19.5/17.4 0.5-5 2.0m (66) 5722.00 281
65 15.8/13.7 0 0.7m (23) 7700.00 282
65 15.8/13.7 6 0.7m (23) 7700.06 283
65 18.1/16 0 1.3m (4'3") 7701.00 284
65 18.1/16 0 1.3m (4'3") 7701.00A 285
65 18.1/16 2 1.3m (4'3") 7701.02 286
65 18.1/16 2 1.3m (4'3") 7701.02A 287
65 18.1/16 6 1.3m (4'3") 7701.06 288
65 15.6/13.5 0-16 0.7m (23) 7720.00 289
65 18.3/16.2 0-8 1.3m (4'3") 7721.00 290
65 18.3/16.2 0-8 1.3m (4'3") 7721.00A 291
65 18.1/16 2-10 1.3m (4'3") 7721.02 292
65 18.1/16 2-10 1.3m (4'3") 7721.02A 293
65 18/15.9 6-14 1.3m (4'3") 7721.06 294
65 18.1/16 2-10 1.3m (4'3") 7721.10 295
65 18.3/16.2 0-8 1.3m (4'3") 7721.40 296
Single Broadband Antennas
High Broadband Cross Polarized Antennas, 1710-2170 MHz
274

POWERWAVE

Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 19.5/17.4 0.5-5 2.0m (66) 7722.00 297
65 19.5/17.4 0.5-5 2.0m (66) 7722.00A 298
90 14.1/12.0 0-16 0.7m (23) 7735.00A 299
90 16.7/14.6 0-8 1.3m (43) 5740.00 300
90 16.7/14.6 0-8 0.7m (23) 7740.00A 301
90 19.5/17.4 0.5-5 2.0m (66) 7745.00A 302
65
17.7/15.6,
17.9/15.8, 18.1/16
0-8 1.3m (43) 5760.00 303
65
17.7/15.6,
17.7/15.6,
17.9/15.8
2-10 1.3m (43) 5760.02 304










Single Broadband Antennas
High Broadband Cross Polarized Antennas, 1710-2170 MHz
275

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5701.00 High Broadband Cross Polarized
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.2/16.1
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20 >20
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20, typical>-18 >-20, typical>-18 >-20, typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIM Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 1:17AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 276

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5701.02 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 2
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.8/15.7 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >19 >19 >19
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >26 >26 >26
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 1:18AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
277

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5701.06 High Broadband Cross Polarized
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 6
LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.8/15.7 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >18 >18 >18
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-26,typical>-20 >-26,typical>-20 >-26,typical>-20
Vertical beam squint () <0.5 <0.5 <0.5
Front to back ratio (dB) 180 30 copolar >29 >29 >29
Front to back ratio (dB) 180 30 total power >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 1:20AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
278

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5721.00 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual Linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24 typical >-18 >-24 typical >-18 >-24 typical >-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5(43x6x3)
Mounting Pre Mounted Standard Brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6.0 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 56 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 14 2011 2:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
279

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5721.02 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 1:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 280

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5722.00 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-5.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19/16.9 19.2/17.1 19.5/17.4
Polarization Dual Slant 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 65
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0 - 5.5
Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14@0,1,2,3,4,5 >18,18,18,16,16,14@0,1,2,3,4,5 >18,18,18,16,16,14@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20,typical>-16 >-20,typical>-16 >-20,typical>-16
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >19 >19 >21
Cross polar discrimination (XPD) 60 (dB) >20 >17 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x167x89.5 (64x6x3)
Mounting Pre mounted standard brackets
Weight, with brackets, kg (lbs) 14 (31)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2105x200x200 (611x8x8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 1:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 281

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7700.00 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.8/13.7
TILT:0
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.1/13.0 15.5/13.4 15.8/13.7
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 14.7 13.8 12.8
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >19 >19 >19
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-20,typical>-18 >-20,typical>-18 >-20,typical>-18
Vertical beam squint () 0.6 0.6 0.6
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >26 >26 >26
Cross polar discrimination (XPD) 0(dB) >17 >19 >19
Cross polar discrimination (XPD) 60(dB) >17 >15 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 709x167x89.5 (23x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 6.7 (14.8)
Weight, without brackets, kg (lbs) 3 (6.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 880x200x200 (211x 8x 8)
Shipping weight, kg (lbs) 10 (22)
RET -
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08189 Rev A Updated: Dec 2 2010 3:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 282

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7700.06 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.8/13.7
TILT:6
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.0/12.9 15.5/13.4 15.8/13.7
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 14.7 13.8 12.8
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-26,typical>-20 >-26,typical>-20 >-26,typical>-20
Vertical beam squint () 0.6 0.6 0.6
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >26 >26 >26
Cross polar discrimination (XPD) 0(dB) >17 >19 >19
Cross polar discrimination (XPD) 60(dB) >17 >15 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 709x167x89.5 (23x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 6.7 (14.8)
Weight, without brackets, kg (lbs) 3 (6.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 880x200x200 (211x 8x 8)
Shipping weight, kg (lbs) 10 (22)
RET -
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7700.06 Updated: Dec 2 2010 3:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 283

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7701.00 High Broadband Cross Polarized
POLARIZATION: X-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.2/16.1
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20 >20
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20,typical>-18 >-20,typical>-18 >-20,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08191 Rev A Updated: Dec 2 2010 3:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
284

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7701.00A High Broadband Cross Polarized
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.2/16.1
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20 >20
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20, typical>-18 >-20, typical>-18 >-20, typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIM Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Jul 05 2010 Updated: Mar 3 2011 1:18AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 285

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7701.02 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.1/16
TILT:2
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.8/15.7 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >19 >19 >19
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >26 >26 >26
Cross polar discrimination (XPD) 0(dB) >17 >19 >20
Cross polar discrimination (XPD) 60(dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08192 Rev A Updated: Dec 2 2010 3:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 286

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7701.02A High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.1/16
TILT:2
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.8/15.7 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >19 >19 >19
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >26 >26 >26
Cross polar discrimination (XPD) 0(dB) >17 >17 >20
Cross polar discrimination (XPD) 60(dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to+60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:19AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 287

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7701.06 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.1/16.0
TILT:6
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.8/15.7 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.2 6.7 6.4
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >18 >18 >18
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-26,typical>-20 >-26,typical>-20 >-26,typical>-20
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >29 >29 >29
Front to back ratio (dB) 18030total power >25 >25 >25
Cross polar discrimination (XPD) 0(dB) >17 >19 >20
Cross polar discrimination (XPD) 60(dB) >17 >14 >11
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET -
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08193 Rev A Updated: Nov 29 2010 4:18AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 288

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7720.00 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.6/13.5
TILT:0-16
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.0/12.9 15.1/13.0 15.6/13.5
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 14.1 13.5 12.5
Electrical down tilt () 0-16
Side lobe suppression, vertical 1st upper (dB) >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.5 <1.5 <1.5
First null fill (dB) >-29,typical>-25 >-29,typical>-25 >-29,typical>-25
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >25 >25 >25
Cross polar discrimination (XPD) 0(dB) >15 >18 >18
Cross polar discrimination (XPD) 60(dB) >15 >15 >13
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 709x167x89.5 (23x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 8.2 (18)
Weight, without brackets, kg (lbs) 4.5 (9.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 56 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 880x200x200 (211x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET 8110.40, 8110.10
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08194 Rev A Updated: Sep 14 2011 2:24AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 289

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.00 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,@0,2,4,6,8 >18,18,16,16,14,@0,2,4,6,8 >18,18,16,16,14,@0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6.0 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.40, 8110.10
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 4:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 290

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.00A High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.3/16.2
TILT:0-8
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual Linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-24 typical >-18 >-24 typical >-18 >-24 typical >-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >27 >27 >27
Cross polar discrimination (XPD) 0(dB) >17 >17 >20
Cross polar discrimination (XPD) 60(dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5(43x6x3)
Mounting Pre Mounted Standard Brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6.0 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 1:22AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 291

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.02 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.1/16.0
TILT:2-10
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >27 >27 >27
Cross polar discrimination (XPD) 0(dB) >17 >19 >20
Cross polar discrimination (XPD) 60(dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 5:16AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 292

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.02A High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.1/16.0
TILT:2-10
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >27 >27 >27
Cross polar discrimination (XPD) 0(dB) >17 >19 >20
Cross polar discrimination (XPD) 60(dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:26AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 293

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.06 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.0/15.9
TILT:6-14
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.8/15.7 18.0/15.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.3 6.9 6.6
Electrical down tilt () 6-14
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@6,8,10,12,14 >20,20,20,19,18@6,8,10,12,14 >20,20,20,19,18@6,8,10,12,14
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <2 <2 <2
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >27 >27 >27
Cross polar discrimination (XPD) 0(dB) >17 >19 >20
Cross polar discrimination (XPD) 60(dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.40, 8110.10
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08196 Rev A Updated: Dec 2 2010 5:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 294

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7721.10 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10 >20,20,19,19,18@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting No pre-mounted bracket.
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.40, 8110.10
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Feb 7 2011 9:05AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 295

POWERWAVE Single Broadband Antennas
This is the connectur up version of 7721.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7721.40 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8 >18,18,16,16,14 @ 0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >17 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Top
Dimensions, HxWxD, mm(ft) 1309x167x89.5 mm (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 13.5 (29.7)
RET 8110.10,8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 2 2010 4:54AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 296

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7722.00 High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-5.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.5/17.4
Polarization Dual slant 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 65
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14,@0,1,2,3,4,5 >18,18,18,16,16,14,@0,1,2,3,4,5 >18,18,18,16,16,14,@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20,typical>-16 >-20,typical>-16 >-20,typical>-16
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >19 >20 >21
Cross polar discrimination (XPD) 60 (dB) >20 >17 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x167x89.5 (64x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 14 (31)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2105x200x200 (611x8x8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08197 Rev A Updated: Dec 2 2010 5:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 297

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7722.00A High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):19.5/17.4
TILT:0-5.5
LENGTH:2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19/16.9 19.2/17.1 19.5/17.4
Polarization Dual Slant 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 65
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0 - 5.5
Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14@0,1,2,3,4,5 >18,18,18,16,16,14@0,1,2,3,4,5 >18,18,18,16,16,14@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-20,typical>-16 >-20,typical>-16 >-20,typical>-16
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 18030copolar >30 >30 >30
Front to back ratio (dB) 18030total power >27 >27 >27
Cross polar discrimination (XPD) 0(dB) >19 >19 >21
Cross polar discrimination (XPD) 60(dB) >20 >17 >12
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x167x89.5 (64x6x3)
Mounting Pre mounted standard brackets
Weight, with brackets, kg (lbs) 14 (31)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2105x200x200 (611x8x8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / May 05 2010 Updated: Mar 3 2011 1:08AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 298

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7735.00A High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.1/12.0
TILT: 0-16
LENGTH: 0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 13.6/11.5 13.8/11.7 14.1/12.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 86 86 87
Vertical beam width, -3 dB () 14.7 13.4 12.2
Electrical down tilt () 0-16
Side lobe suppression, vertical 1st upper (dB) >18,17,16,15,14@0,4,8,12,16 >18,17,16,15,14@0,4,8,12,16 >18,17,16,15,14@0,4,8,12,16
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.8 0.8 0.8
Front to back ratio (dB) 180 30 copolar >25 >25 >25
Front to back ratio (dB) 180 30 total power >23 >23 >23
Cross polar discrimination (XPD) 0 (dB) >13 >13 >12
Cross polar discrimination (XPD) 60 (dB) >10 >10 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) -153 -153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 709x167x89.5 (23x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 880x200x200 (211x8x8)
Shipping weight, kg (lbs) 13 (28.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08198 Rev A Updated: Dec 2 2010 5:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 299

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5740.00 High Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):16.7/14.6
TILT:0-8
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 16.2/14.1 16.4/14.3 16.7/14.6
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 86 86 86
Vertical beam width, -3 dB () 7.1 6.6 6.3
Electrical down tilt () 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,17,15,15,14@0,2,4,6,8 >18,17,15,15,14@0,2,4,6,8 >18,17,15,15,14@0,2,4,6,8
Isolation between inputs (dB) 30 30 30
Tracking, horizontal plane 60(dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 18030copolar >29 >29 >29
Front to back ratio (dB) 18030total power >23 >23 >23
Cross polar discrimination (XPD) 0(dB) >14 >14 >12
Cross polar discrimination (XPD) 60(dB) >10 >10 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 11.7 (25.7)
Weight, without brackets, kg (lbs) 8 (17.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 56 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET 8110.10, 8110.40
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 14 2011 2:26AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 300

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7740.00A High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.7/14.6
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 16.2/14.1 16.4/14.3 16.7/14.6
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 86 86 86
Vertical beam width, -3 dB () 7.1 6.6 6.3
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >18,17,15,15,14@0,2,4,6,8 >18,17,15,15,14@0,2,4,6,8 >18,17,15,15,14@0,2,4,6,8
Isolation between inputs (dB) 30 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 180 30 copolar >29 >29 >29
Front to back ratio (dB) 180 30 total power >23 >23 >23
Cross polar discrimination (XPD) 0 (dB) >14 >13 >12
Cross polar discrimination (XPD) 60 (dB) >10 >10 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 11.7 (25.7)
Weight, without brackets, kg (lbs) 8 (17.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200 (410x8x8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET 8110.40. 8110.10
Brackets 7256.00A,7454.00,7455.00,7488.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / May 07 2010 Updated: Mar 3 2011 1:09AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
301

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7745.00A High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 17.9/15.8
TILT: 0-5.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.5/15.4 17.6/15.5 17.9/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 86 86 86
Vertical beam width, -3 dB () 4.7 4.5 4.2
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,14,@0,1,2,3,4,5 >18,18,16,16,14,14,@0,1,2,3,4,5 >18,18,16,16,14,14,@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.3 0.3 0.3
Front to back ratio (dB) 180 30 copolar >29 >29 >29
Front to back ratio (dB) 180 30 total power >23 >23 >23
Cross polar discrimination (XPD) 0 (dB) >14 >13 >12
Cross polar discrimination (XPD) 60 (dB) >10 >10 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x167x89.5 (64x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 15.9 (35)
Weight, without brackets, kg (lbs) 10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2105x200x200 (611x8x8)
Shipping weight, kg (lbs) 18 (39.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08200 Rev A Updated: Dec 2 2010 5:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 302

POWERWAVE Single Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5760.00 Dual High Broadband Cross Polarized
POLARIZATION:XX-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.7/15.6, 17.9/15.8, 18.1/16
TILT:0-8
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0 - 8
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >28 >28 >28
Front to back ratio (dB) 18030total power >28 >28 >28
Cross polar discrimination (XPD) 0(dB) >16 >18 >20
Cross polar discrimination (XPD) 60(dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x430x250 (48x13x9)
Shipping weight, kg (lbs) 23.5 (51.8)
RET 8110.10, 8110.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 24 2011 2:41AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 303

POWERWAVE Dual High Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5760.02 Dual High Broadband Cross Polarized
POLARIZATION:XX-Pol
FREQUENCY (MHz):1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.7/15.6, 17.7/15.6, 17.9/15.8
TILT:2-10
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 63
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60(dB) <2.0 <2.0 <2.0
First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 18030copolar >28 >28 >28
Front to back ratio (dB) 18030total power >28 >28 >28
Cross polar discrimination (XPD) 0(dB) >16 >18 >20
Cross polar discrimination (XPD) 60(dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 27.5 (60.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:11AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 304

POWERWAVE

Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz
Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 14.6/12.5, 15.0/12.9 2-12 1.3m (4'3") P65-15-XD-N 307
65 17.1/15.0, 17.5/15.4 0-7.5 2.0m (6'6") 5472.00 308
65 17.7/15.6, 18.5/46.4 0-0.5 2.6m (8'6") 5473.00 309
65 16.5/14.4, 17.0/14.9 0 2.0m (6'6") 5477.00 310
65 17.4/15.3, 18.1/16.0 0 2.6m (8'6") 5478.00 311
65 17.4/15.2, 18.0/15.8 6 2.6m (8'6") 5478.06 312
65 14.5/12, 15/12.9 0 1.3m (4'3") 7476.00 313
65 14.6/12.5, 15.1/13 2 1.3m (4'3") 7476.02 314
65 14.6/12.5, 15.1/13 6 1.3m (4'3") 7476.06 315
65 15.6/13.5, 16.2/14.1 0 2.0m (6'6") 7477.00 316
65 15.6/13.5, 16.2/14.1 2 2.0m (6'6") 7477.02 317
65 16.9/14.8, 17.3/15.2 0 2.0m (6'6") 7478.00 318
65 16/13.9, 16.5/14.4 0-7.5 2.0m (6'6") 7472.00 319
65 17.7/15.6, 18.5/46.4 0-0.5 2.0m (6'6") 7472.00A 320
65 16/13.9, 16.5/14.4 6 2.0m (6'6") 7477.06 321
65 17/14.9, 17.4/15.3 2 2.6m (8'6") 7478.02 322
65 17/14.9, 17.4/15.3 6 2.6m (8'6") 7478.06 323
65 17.7/15.6, 18.5/46.4 0 2.6m (8'6") 7478.00A 324
65 17.2/15.1, 17.5/15.4 0-5.5 2.6m (8'6") 7473.00 325
65 18.5/16.4 0-0.5 2.6m (8'6") 7473.00A 326
90 13.6/11.5, 14/11.9 6 1.4m (4'7") 7486.06 327
90 14.8/12.7, 15.4/13.3 0 2.0m (6'6") 7487.00 328
90 14.8/12.7, 15.5/13.4 0-7.5 2.0m (6'6") 7482.00 329
90 15.8/13.7, 16.3/14.2 0 2.6m (8'6") 7488.00 330
90 15.8/13.7, 16.3/14.2 2 2.6m (8'6") 7488.02 331
90 16.6/14.5, 17.1/15.0 0 2.6m (8'6") 7488.00A 332
90 15.9/13.8, 16.3/14.2 0-0.5 2.6m (8'6") 7483.00 333
90 16.6/14.5, 17.0/14.9 0-0.5 2.6m (8'6") 7483.00A 334
Single Broadband Antennas
Low Broadband Cross Polarized Antennas, 806-960 MHz
305

POWERWAVE

Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz
Horizontal Beamwidth Gain dBi dBd Tilt Length Part Number Page
90 15.9/13.8, 16.4/14.3 6 2.6m (8'6") 7488.06 335
90 15/12.9, 15.5/13.4 2 2.0m (6'6") 7487.02 336
90 15/12.9, 15.5/13.4 6 2.0m (6'6") 7487.06 337
90 16.6/14.5, 17.0/14.9 0-0.5 2.6m (8'6") 5483.00 338
90 16.6/14.5, 17.1/15.0 0 2.6m (8'6") 5488.00 339
90 13.5/11.4, 14/11.9 2-12 1.3m (4'3") 7481.00 340
90 13.5/11.4, 14/11.9 0 1.4m (4'7") 7486.00 341
90 13.6/11.5, 14.1/12 2 1.4m (4'7") 7486.02 342

















Single Broadband Antennas
Low Broadband Cross Polarized Antennas, 806-960 MHz
306

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
P65-15-XD-N Low Broadband X-Pol 790-960MHz
POLARIZATION:X-Pol
FREQUENCY (MHz):790-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):14.6/12.5, 15.0/12.9
TILT:2-12
LENGTH:1.3m (44)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 790-960
Frequency band (MHz) 790-896 870-960
Gain (dBi/dBd) 14.6/12.5 15.0/12.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.5:1
Horizontal beam width, -3 dB () 65 65
Vertical beam width, -3 dB () 15.3 14.2
Electrical down tilt () 2 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16@2,7,12 >19,18,17@2,7,12
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60(dB) <2.0 <2.0
First null fill (dB) >-25 >-25
Vertical beam squint () 1 1
Front to back ratio (dB) 18030copolar >25 >25
Front to back ratio (dB) 18030total power >24 >25
Cross polar discrimination (XPD) 0(dB) >15 >15
Cross polar discrimination (XPD) 60(dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1314x280x125 (44x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.5 (31.9)
Weight, without brackets, kg (lbs) 9.0 (19.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367 / 63 / 441
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 18.5 (40.7)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Oct 27 2011 3:54AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 307

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5472.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.1/15.0, 17.5/15.4
TILT: 0-7.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 17.1/15.0 17.5/15.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.5:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.6 9.2
Electrical down tilt () 0 - 7.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7 >20,17,15@0,4,7
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2080x280x125 (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20 (44)
Weight, without brackets, kg (lbs) 14.5 (31.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664 / 102 / 798
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 24.5 (54)
RET 8110.10 (AISG1.1), 8110.40 (AISG2.0)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 2:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 308

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5473.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 18.5/16.4
TILT: 0-5.5
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 17.7/15.6 18.5/16.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.5:1
Horizontal beam width, -3 dB () 67 64
Vertical beam width, -3 dB () 7.5 7
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 21 (46.3)
Weight, without brackets, kg (lbs) 15.5 (34.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 25 (55.1)
RET 8110.10, 8110.40
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 12:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 309

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5477.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.5/14.4, 17.0/14.9
TILT: 0
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 16.5/14.4 17.0/14.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.8 9.2
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.2
Front to back ratio (dB) 180 30 copolar >30 >34
Front to back ratio (dB) 180 30 total power >26 >28
Cross polar discrimination (XPD) 0 (dB) >20 >18
Cross polar discrimination (XPD) 60 (dB) >13 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 17.5 (38.5)
Weight, without brackets, kg (lbs) 12.0 (26.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 22 (48.4)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 1 2011 5:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 310

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5478.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 18.1/16.0
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17.4/15.3 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 7.3 7.0
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >31 >36
Front to back ratio (dB) 180 30 total power >29 >29
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 2:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 311

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5478.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.2, 18.0/15.8
TILT: 6
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17.4/15.2 18.0/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 68 64
Vertical beam width, -3 dB () 7.5 7.0
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >15 >15
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <2.0 <1.0
First null fill (dB) >-20 >-20
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >28 >27
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 300
Power handling, average total (W) 600

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.7 (41.4)
Weight, without brackets, kg (lbs) 14.5 (30.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 25.5 (53.5)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 2:19AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 312

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7476.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4, 15/12.9
TILT: 0
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 14.5/12.4 15/12.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 15.9 15.3
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >19 >19
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-25 >-25
Vertical beam squint () 1 1
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) >18 >18
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14 (30.8)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 18 (39.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08163 Rev A Updated: Aug 2 2011 4:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 313

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7476.02 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.6/12.5, 15.1/13
TILT: 2
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 14.6/12.5 15.1/13
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 14.9 13.8
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >19 >19
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-25 >-25
Vertical beam squint () 1 1
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14 (30.8)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 18 (39.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08164 Rev A Updated: Jun 6 2011 1:55AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 314

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7476.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.6/12.5, 15.1/13
TILT: 6
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 14.6/12.5 15.1/13
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 15.3 13.9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >19 >19
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-25 >-25
Vertical beam squint () 1 1
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) >18 >18
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14 (30.8)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 18 (39.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08165 Rev A Updated: Aug 2 2011 4:37AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 315

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7477.00 Low Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):806-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.6/13.5, 16.2/14.1
TILT:0
LENGTH:2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.6/13.5 16.2/14.1
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.5 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60(dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30
Front to back ratio (dB) 18030total power >25 >25
Cross polar discrimination (XPD) 0(dB) - -
Cross polar discrimination (XPD) 60(dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.7)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 23 (50.7)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08166 Rev A Updated: Dec 2 2010 3:06AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 316

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7477.02 Low Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):806-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.8/13.7, 16.3/14.2
TILT:2
LENGTH:2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.8/13.7 16.3/14.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.5 9
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60(dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 18030copolar >30 >30
Front to back ratio (dB) 18030total power >25 >25
Cross polar discrimination (XPD) 0(dB) - -
Cross polar discrimination (XPD) 60(dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.7)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 23 (50.7)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08167 Rev A Updated: Dec 2 2010 3:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 317

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7478.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.9/14.8, 17.3/15.2
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 16.9/14.8 17.3/15.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 7.3 7
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08169 Rev A Updated: Dec 2 2010 3:09AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 318

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7472.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16/13.9, 16.5/14.4
TILT: 0-7.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 16/13.9 16.5/14.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 67 64
Vertical beam width, -3 dB () 10 9
Electrical down tilt () 0-7.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7 >20,17,15@0,4,7
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2080x280x125 (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20 (44)
Weight, without brackets, kg (lbs) 14.5 (31.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 24.5 (54)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08185 Rev A Updated: Dec 2 2010 2:53AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 319

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7472.00A Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.1/15.0, 17.5/15.4
TILT: 0-7.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 17.1/15.0 17.5/15.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.5:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.6 9.2
Electrical down tilt () 0-7.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7 >20,17,15@0,4,7
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2080x280x125 (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20(44)
Weight, without brackets, kg (lbs) 14.5(31.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 24.5 (54)
RET 8110.10(AISG1.1),8110.40(AISG2.0)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 30 2010 3:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 320

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7477.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16/13.9, 16.5/14.4
TILT: 6
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 16/13.9 16.5/14.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 9.5 9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.7)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 23 (50.7)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08168 Rev A Updated: Jun 6 2011 1:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 321

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7478.02 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9, 17.4/15.3
TILT: 2
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17/14.9 17.4/15.3
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 7.3 7
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08170 Rev A Updated: Dec 2 2010 3:10AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 322

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7478.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9, 17.4/15.3
TILT: 6
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17/14.9 17.4/15.3
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 7.3 7
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08171 Rev A Updated: Dec 2 2010 3:11AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 323

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7478.00A Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 18.1/16.0
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17.4/15.3 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 66 64
Vertical beam width, -3 dB () 7.3 7.0
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >31 >36
Front to back ratio (dB) 180 30 total power >29 >29
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >12 >12
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 2:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 324

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7473.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.2/15.1, 17.5/15.4
TILT: 0-5.5
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 17.2/15.1 17.5/15.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 67 64
Vertical beam width, -3 dB () 7.5 7
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) 30 30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x280x125 (84x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24 (52.9)
Weight, without brackets, kg (lbs) 18.5 (40.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 28 (61.7)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08186 Rev A Updated: Dec 2 2010 2:54AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 325

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7473.00A Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.5/16.4
TILT: 0-5.5
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 17.7/15.6 18.5/16.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.5:1
Horizontal beam width, -3 dB () 67 64
Vertical beam width, -3 dB () 7.5 7
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >30 >30
Front to back ratio (dB) 180 30 total power >25 >25
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >11 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 21(46.3)
Weight, without brackets, kg (lbs) 15.5 (34.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 25 (55.1)
RET 8110.10,8110.40
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 30 2010 3:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 326

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7486.06 Low Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):806-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):13.6/11.5, 14/11.9
TILT:6
LENGTH:1.3m (45)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 13.6/11.5 14/11.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 85
Vertical beam width, -3 dB () 15.5 13.9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >18 >18
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0
First null fill (dB) >-25 >-25
Vertical beam squint () 0.6 0.6
Front to back ratio (dB) 18030copolar >27 >28
Front to back ratio (dB) 18030total power >22 >22
Cross polar discrimination (XPD) 0(dB) >22 >21
Cross polar discrimination (XPD) 60(dB) >10 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 20.5 (45.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08174 Rev A Updated: Jul 15 2011 1:39AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 327

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7487.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.8/12.7, 15.4/13.3
TILT: 0
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 14.8/12.7 15.4/13.3
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 9.7 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-20 >-18
Vertical beam squint () 0.1 0.2
Front to back ratio (dB) 180 30 copolar >28 >29
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >19
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20.5 (45.1)
Weight, without brackets, kg (lbs) 15 (33)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 25 (55.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08175 Rev A Updated: Dec 2 2010 3:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 328

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7482.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.8/12.7, 15.5/13.4
TILT: 0-7.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 14.8/12.7 15.5/13.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 88 86
Vertical beam width, -3 dB () 9.6 9
Electrical down tilt () 0-7.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,4,7 >20,17,15@0,4,7
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-25 >-20
Vertical beam squint () 0.4 0.4
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >19
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 600

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 27 (59.5)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08187 Rev A Updated: Dec 2 2010 3:20AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 329

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7488.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.8/13.7, 16.3/14.2
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.8/13.7 16.3/14.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.6 7
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.2 0.1
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >21 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24.5 (54)
Weight, without brackets, kg (lbs) 19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 29.5 (65)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08178 Rev A Updated: Dec 2 2010 3:30AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 330

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7488.02 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.8/13.7, 16.3/14.2
TILT: 2
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.8/13.7 16.3/14.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.6 7
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.3 0.2
Front to back ratio (dB) 180 30 copolar >26 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24.5 (54)
Weight, without brackets, kg (lbs) 19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 29.5 (65)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08179 Rev A Updated: Dec 2 2010 3:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 331

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7488.00A Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.1/15.0
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 16.6/14.5 17.1/15.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.6 7.0
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.2 0.1
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24.5 (54)
Weight, without brackets, kg (lbs) 19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255(811x12x10)
Shipping weight, kg (lbs) 29.5 (65)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 30 2010 3:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 332

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7483.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.9/13.8, 16.3/14.2
TILT: 0-5.5
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.9/13.8 16.3/14.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.5 6.9
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-23 >-21
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >27 >28
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >21 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 26.5 (58.4)
Weight, without brackets, kg (lbs) 21 (46.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 31.5 (69.4)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08188 Rev A Updated: Dec 2 2010 3:21AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 333

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7483.00A Low Broadband Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):806-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):16.6/14.5, 17.0/14.9
TILT:0-5.5
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 16.6/14.5 17.0/14.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 90 90
Vertical beam width, -3 dB () 7.5 6.9
Electrical down tilt () 0 - 5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60(dB) <1.0 <1.0
First null fill (dB) >-23 >-21
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 18030copolar >27 >28
Front to back ratio (dB) 18030total power >22 >22
Cross polar discrimination (XPD) 0(dB) >21 >21
Cross polar discrimination (XPD) 60(dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 26.5 (58.4)
Weight, without brackets, kg (lbs) 21 (46.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 31.5 (69.4)
RET 8110.10, 8110.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 2 2010 3:22AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 334

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7488.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.9/13.8, 16.4/14.3
TILT: 6
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15.9/13.8 16.4/14.3
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.6 7
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-20 >-20
Vertical beam squint () 0.1 0.2
Front to back ratio (dB) 180 30 copolar >26 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24.5 (54)
Weight, without brackets, kg (lbs) 19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 29.5 (65)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08180 Rev A Updated: Dec 2 2010 3:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 335

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7487.02 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9, 15.5/13.4
TILT: 2
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15/12.9 15.5/13.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 9.7 9
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-20 >-18
Vertical beam squint () 0.3 0.2
Front to back ratio (dB) 180 30 copolar >28 >29
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20.5 (45.1)
Weight, without brackets, kg (lbs) 15 (33)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 25 (55.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08176 Rev A Updated: Dec 2 2010 3:28AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 336

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7487.06 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9, 15.5/13.4
TILT: 6
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 15/12.9 15.5/13.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 9.7 9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-20 >-20
Vertical beam squint () 0.1 0.2
Front to back ratio (dB) 180 30 copolar >28 >28
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >19
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2020x280x125 (67x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 20.5 (45.1)
Weight, without brackets, kg (lbs) 15 (33)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225x355x255 (73x12x10)
Shipping weight, kg (lbs) 25 (55.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08177 Rev A Updated: Dec 2 2010 3:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 337

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5483.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.0/14.9
TILT: 0-5.5
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 16.6/14.5 17.0/14.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 90 90
Vertical beam width, -3 dB () 7.5 6.9
Electrical down tilt () 0 - 5.5
Side lobe suppression, vertical 1st upper (dB) >20,17,15@0,2,5 >20,17,15@0,2,5
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-23 >-21
Vertical beam squint () 0.3 0.3
Front to back ratio (dB) 180 30 copolar >27 >28
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >21 >21
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 26.5 (58.4)
Weight, without brackets, kg (lbs) 21 (46.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255 (811x12x10)
Shipping weight, kg (lbs) 31.5 (69.4)
RET 8110.10, 8110.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 3:11AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 338

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
5488.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.1/15.0
TILT: 0
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 16.6/14.5 17.1/15.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 7.6 7.0
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-18 >-18
Vertical beam squint () 0.2 0.1
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >20 >20
Cross polar discrimination (XPD) 60 (dB) >10 >10
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2520x280x125 (83x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 24.5 (54)
Weight, without brackets, kg (lbs) 19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725x355x255(811x12x10)
Shipping weight, kg (lbs) 29.5 (65)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Nov 29 2010 3:24AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 339

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7481.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/11.4, 14/11.9
TILT: 2-12
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 870-960
Gain (dBi/dBd) 13.5/11.4 14/11.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 85
Vertical beam width, -3 dB () 15 14
Electrical down tilt () 2-12
Side lobe suppression, vertical 1st upper (dB) >19,18,17@2,7,12 >19,18,17@2,7,12
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <2 <2
First null fill (dB) >-18 >-18
Vertical beam squint () 0.5 0.5
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >23 >23
Cross polar discrimination (XPD) 0 (dB) - -
Cross polar discrimination (XPD) 60 (dB) >9 >9
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.7)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 22.5 (49.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08183 Rev A Updated: Dec 2 2010 3:19AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 340

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7486.00 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/11.4, 14/11.9
TILT: 0
LENGTH: 1.3m (45)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 13.5/11.4 14/11.9
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 15.5 14
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-21 >-25
Vertical beam squint () 0.6 0.4
Front to back ratio (dB) 180 30 copolar >27 >27
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >21 >22
Cross polar discrimination (XPD) 60 (dB) >10 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 20.5 (45.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08172 Rev A Updated: Jul 15 2011 1:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 341

POWERWAVE Single Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7486.02 Low Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.6/11.5, 14.1/12
TILT: 2
LENGTH: 1.3m (45)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-960
Frequency band (MHz) 806-896 880-960
Gain (dBi/dBd) 13.6/11.5 14.1/12
Polarization Dual linear 45
Nominal Impedance () 50
VSWR 1.4:1
Horizontal beam width, -3 dB () 87 84
Vertical beam width, -3 dB () 15.4 14
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >20 >20
Isolation between inputs (dB) >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0
First null fill (dB) >-23 >-25
Vertical beam squint () 0.4 0.4
Front to back ratio (dB) 180 30 copolar >28 >28
Front to back ratio (dB) 180 30 total power >22 >22
Cross polar discrimination (XPD) 0 (dB) >21 >21
Cross polar discrimination (XPD) 60 (dB) >10 >11
Far field coupling - -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1270x280x125 (42x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475x355x255 (410x12x10)
Shipping weight, kg (lbs) 20.5 (45.1)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08173 Rev A Updated: Jul 15 2011 1:39AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 342

POWERWAVE

Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 698-894 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 14.5/12.4 2 1.2m(48) P65-15-XL-2 344
65 14.5/12.4 4 1.2m(48) P65-15-XL-4 345
65 16.0/13.9 2 1.8m(72) P65-16-XL-2 346
65 16.0/13.9 4 1.8m(72) P65-16-XL-4 347
65 16.0/13.9 6 1.8m(72) P65-16-XL-6 348
65 17.5/15.4 2 2.4m(96) P65-17-XL-2 349
65 17.5/15.4 4 2.4m(96) P65-17-XL-4 350















Single Broadband Antennas

Low Broadband Cross Polarized Antennas, 698-894 MHz
343

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-15-XL-2 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4
TILT: 2
LENGTH: 1.2m (48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 14.0/11.9 14.5/12.4
Polarization Dual Linear +/- 45
Nominal Impedance () 50
VSWR < 1.33:1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 16.5 15.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 48x12x5 (1219x305x125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 33 (15)
Weight, without brackets, kg (lbs) 22 (10)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
400
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 58 x 16 x 10 (1475 x 400 x 255)
Shipping weight, kg (lbs) 44 (22)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 3 2010 1:08AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
344

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-15-XL-4 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4
TILT: 4
LENGTH: 1.2m (48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 14.0/11.9 14.5/12.4
Polarization Dual Linear +/- 45
Nominal Impedance () 50
VSWR < 1.33:1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 16.5 15.5
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 48x12x5 (1219x305x125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 33 (15)
Weight, without brackets, kg (lbs) 22 (10)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
400
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 58 x 16 x 10 (1475 x 400 x 255)
Shipping weight, kg (lbs) 44 (20)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 3 2010 1:09AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
345

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-16-XL-2 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 2
LENGTH: 1.8m (72)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 15.5/13.4 16.0/13.9
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.33: 1 < 1.33: 1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 10.5 9.5
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 400 400
Power handling, average total (W) 800 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 72 x 12 x 5 (1829 x 305 x 125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 44 (20)
Weight, without brackets, kg (lbs) 33 (15)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 82 x 16 x 10 (2082 x 400 x 255)
Shipping weight, kg (lbs) 55 (25)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 3 2010 3:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
346

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-16-XL-4 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 4
LENGTH: 72
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 15.5/13.4 16.0/13.9
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.33: 1 < 1.33: 1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 10.5 9.5
Electrical down tilt () 4 4
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 400 400
Power handling, average total (W) 800 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 72 x 12 x 5 (1829 x 305 x 125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 44 (20)
Weight, without brackets, kg (lbs) 33 (15)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1380
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 82 x 16 x 10 (2082 x 400 x 255)
Shipping weight, kg (lbs) 55 (25)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 5 2010 11:34PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
347

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-16-XL-6 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 6
LENGTH: 1.8m (72)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 15.5/13.4 16.0/13.9
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.33: 1 < 1.33: 1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 10.5 9.5
Electrical down tilt () 6 6
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) -153
Power handling, average per input (W) 400
Power handling, average total (W) 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 72 x 12 x 5 (1829 x 305 x 125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 44 (20)
Weight, without brackets, kg (lbs) 33 (15)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 82 x 16 x 10 (2082 x 400 x 255)
Shipping weight, kg (lbs) 55 (25)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Jun 6 2011 12:23AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
348

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-17-XL-2 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 2
LENGTH: 2.4m (96)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 16.5/14.4 17.5/15.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.33:1 < 1.33:1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 8.5 7.5
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 400 400
Power handling, average total (W) 800 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 96 x 12 x 5 (2438 x 305 x 125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 54 (25)
Weight, without brackets, kg (lbs) 43 (20)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 107 x 16 x 10 (2725 x 400 x 255)
Shipping weight, kg (lbs) 65 (30)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 5 2010 11:29PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
349

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-17-XL-4 Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 4
LENGTH: 2.4m (96)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 16.5/14.4 17.5/15.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.33:1 < 1.33:1
Horizontal beam width, -3 dB () 68 65
Vertical beam width, -3 dB () 8.5 7.5
Electrical down tilt () 4 4
Side lobe suppression, vertical 1st upper (dB) > 15 > 15
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 30 > 30
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 400 400
Power handling, average total (W) 800 800

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 96 x 12 x 5 (2438 x 305 x 125)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 54 (25)
Weight, without brackets, kg (lbs) 43 (20)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 125 (55)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 107 x 16 x 10 (2725 x 400 x 255)
Shipping weight, kg (lbs) 65 (30)
RET N/A
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 5 2010 11:28PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Single Broadband Antennas
350

POWERWAVE

Dual Broadband Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 17.7/15.6, 17.7/15.6, 17.9/15.8 MET 1.3m (4'3") 7760.02 352
65 17.7/15.6, 17.9/15.8, 18.1/16 MET 1.3m (4'3") 7760.00 353
65 17.7/15.6, 17.9/15.8, 18.1/16 MET 1.3m (4'3") 7760.00A 354
65 18/15.9 MET 1.3m (4'3") 7760.03 355
65 18/15.9 MET 1.3m (4'3") 7760.06 356
65 17.7/15.6, 17.9/15.8, 18.1/16 MET 1.3m (4'3") 7760.40 357
65 19/16.9, 19.2/17.1, 19.4/17.3 MET 2.0m (6'6") 7765.00 358
90 16.1/14, 16.2/14.1, 16.5/14.4 MET 1.3m (4'3") 7762.00 359
90 17.4/15.3, 17.5/15.4, 17.7/15.6 MET 2.0m (6'6") 7766.00 360
Dual Broadband Antennas
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
351

POWERWAVE Dual Broadband Antennas


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.02 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 63
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 2-10
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 27.5 (60.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Oct 28 2011 5:15AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 352

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.00 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x430x250 (48x13x9)
Shipping weight, kg (lbs) 23.5 (51.8)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 24 2011 2:37AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
353

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.00A Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0 - 8
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8 >22,20,18,16,14@0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-150 <-150 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x430x250 (48x13x9)
Shipping weight, kg (lbs) 23.5 (51.8)
RET 8110.10, 8110.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 24 2011 2:43AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
354

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.03 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10/6-14
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 63
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 2 to 10 and 6 to 14
Side lobe suppression, vertical 1st upper (dB) >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10 >19,19,18,17,16@2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 27.5 (60.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08204 Rev. A Updated: Dec 2 2010 6:43AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
355

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.06 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 6-14
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.7/15.6 17.9/15.8
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 63
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 6-14
Side lobe suppression, vertical 1st upper (dB) >17,16@6,8,10 >17,16@6,8,10 >17,16@6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 -
IM7, 2xTx&43dBm (dBc) - - <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 27.5 (60.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08204 Rev. A Updated: Dec 2 2010 6:42AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
356

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7760.40 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-27,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >16 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Top
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1093
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 23.5 (51.8)
RET 8220.10,8220.40,8110.10,8110.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Apr 11 2011 12:38PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
357

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7765.00 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3
TILT: 0-5.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.4/17.3
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 63
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,15,13@0,1,2,3,4,5 >22,20,18,16,15,14@0,1,2,3,4,5 >22,20,18,16,15,14@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-22,typical>-18 >-22,typical>-18 >-22,typical>-18
Vertical beam squint () <0.5 <0.5 <0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >18 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x343x100 (64x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.5 (49.6)
Weight, without brackets, kg (lbs) 17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
819
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2085x430x250 (610x13x9)
Shipping weight, kg (lbs) 27 (59.5)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08206 Rev A Updated: Dec 2 2010 6:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
358

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7762.00 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4
TILT: 0-8
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 16.1/14.0 16.2/14.1 16.5/14.4
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 89 93 90
Vertical beam width, -3 dB () 7.0 6.7 6.3
Electrical down tilt () 0-8
Side lobe suppression, vertical 1st upper (dB) >17,17,16,15,14@0,2,4,6,8 >17,17,16,15,14@0,2,4,6,8 >20,18,17,16,15@0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-25,typical>-18 >-25,typical>-18 >-25,typical>-18
Vertical beam squint () <0.5 <0.5 <0.5
Front to back ratio (dB) 180 30 copolar >24 >25 >26
Front to back ratio (dB) 180 30 total power >23 >23 >23
Cross polar discrimination (XPD) 0 (dB) >17 >17 >12
Cross polar discrimination (XPD) 60 (dB) >7 >7 >7
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 23.5 (51.8)
Weight, without brackets, kg (lbs) 18 (39.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 27.5 (60.6)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08204 Rev A Updated: Dec 2 2010 6:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
359

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7766.00 Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6
TILT: 0-5.5
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.5/15.4 17.7/15.6
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 89 93 90
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0-5.5
Side lobe suppression, vertical 1st upper (dB) >18,18,15,14,13,11@0,1,2,3,4,5 >20,20,17,16,14,14@0,1,2,3,4,5 >22,20,18,16,15,14@0,1,2,3,4,5
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-25,typical>-18 >-25,typical>-18 >-25,typical>-18
Vertical beam squint () <0.5 <0.5 <0.5
Front to back ratio (dB) 180 30 copolar >25 >25 >25
Front to back ratio (dB) 180 30 total power >23 >23 >23
Cross polar discrimination (XPD) 0 (dB) >16 >16 >12
Cross polar discrimination (XPD) 60 (dB) >8 >8 >8
Far field coupling - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934x343x100 (64x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.5 (60.6)
Weight, without brackets, kg (lbs) 22 (48.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
819
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2085x430x250 (610x13x9)
Shipping weight, kg (lbs) 32 (70.5)
RET 8110.40. 8110.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



D031-08207 Rev. A Updated: Sep 16 2011 6:06AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
360

POWERWAVE

Dual Broadband Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 15.2/13.1, 18/15.9 MET 1.4m (47) 7750.00 362
65 15.2/13.1, 18/15.9 MET 1.4m (47) 7750.00A 363
65 16.7/14.6, 17.6/15.5 MET 2.0m (6'6") 7752.00 364
65 16.7/14.6, 17.6/15.5 MET 2.0m (6'6") 7752.00A 365
65 17.3/15.2, 17.8/15.7 MET 2.6m (8'6") 7755.00 366
65 17.3/15.2, 17.8/15.7 MET 2.6m (86) 7755.00A 367






Dual Broadband Antennas
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
361

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7750.00 Dual Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.2/13.1, 18/15.9
TILT: 2-12/0-8
LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18.0/15.9
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 69 67 65 65 62
Vertical beam width, -3 dB () 14.9 13.7 6.9 6.6 6.2
Electrical down tilt () 2 - 12 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@
2,4,6,8,10,12 2,4,6,8,10,12 2,4,6,8 2,4,6,8 2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 40
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <2.0 <2.0 <2.0
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.3 0.3 0.3
Front to back ratio (dB) 180 30 copolar >27 >27 >27 >27 >27
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 15 20 20 20
Cross polar discrimination (XPD) 60 (dB) 10 8 7 > 7 > 7
Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x125mm (47x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 17.6 (39)
Weight, without brackets, kg (lbs) 12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x255 (51x12x10)
Shipping weight, kg (lbs) 21.5 (47.3)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Dec 2 2010 5:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 362

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7750.00A Dual Broadband Cross Polarized
POLARIZATION:XX-Pol
FREQUENCY (MHz):824-960, 1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.2/13.1, 18.0/15.9
TILT:2-12/0-8
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14.6/12.5 15.2/13.1 17.5/15.4 17.7/15.6 18.0/15.9
Polarization Dual Linear 45 Dual Linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 69 67 65 65 62
Vertical beam width, -3 dB () 14.9 13.7 6.9 6.6 6.2
Electrical down tilt () 2 - 12 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16,15,15@ >18,17,16,16,15,15@ >18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@
2,4,6,8,10,12 2,4,6,8,10,12 0,2,4,6,8 0,2,4,6,8 0,2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 40
Tracking, horizontal plane 60(dB) <1.0 <1.0 <2.0 <2.0 <2.0
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.3 0.3 0.3
Front to back ratio (dB) 18030copolar >27 >27 >27 >27 >27
Front to back ratio (dB) 18030total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0(dB) 15 15 20 20 20
Cross polar discrimination (XPD) 60(dB) 10 8 7 7 7
Far field coupling <0.33 <0.48 <0.62 <0.62 <0.62
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408X280X125mm (47X11X4)
Mounting Pre Mounted Heavy Duty Brackets
Weight, with brackets, kg (lbs) 17.6 (39)
Weight, without brackets, kg (lbs) 12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550X355X25mm (51X12X10)
Shipping weight, kg (lbs) 21.5 (47.3)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 12:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 363

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7752.00 Dual Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 17.6/15.5
TILT: 2-9/0-8
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 15.8/13.7 16.7/14.6 17.1/15 17.3/15.2 17.6/15.5
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 63 63 61
Vertical beam width, -3 dB () 9.6 8.9 7.1 6.6 6.3
Electrical down tilt () 2 - 9 0 - 8
Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >18,18,17,16,16@ >20,19,19,18,17@
2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 40
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <2.0 <2.0 <3
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.4
Front to back ratio (dB) 180 30 copolar >27 >27 >27 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 16
Cross polar discrimination (XPD) 60 (dB) > 12 > 9.5 > 6.2 > 6.5 > 7.5
Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x125mm (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.8 (44)
Weight, without brackets, kg (lbs) 16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27 (59.5)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 7:01AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 364

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7752.00A Dual Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 18.1/16.0
TILT: 2-9/0-8
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 15.8/13.7 16.7/14.6 17.6/15.5 17.8/15.7 18.1/16.0
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 63 63 61
Vertical beam width, -3 dB () 9.6 8.9 7.0 6.6 6.3
Electrical down tilt () 2 - 9 0 - 8
Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >18,18,17,16,16@ >20,19,19,18,17@
2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 40
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <2.0 <2.0 <3
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.4
Front to back ratio (dB) 180 30 copolar >28 >31 >28 >31 >32
Front to back ratio (dB) 180 30 total power >26 >27 >27 >28 >29
Cross polar discrimination (XPD) 0 (dB) >12 >9.5 >7.5 >6.9 >7.5
Cross polar discrimination (XPD) 60 (dB) > 12 > 9.5 > 6.2 > 6.5 > 7.5
Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x125mm (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.8 (44)
Weight, without brackets, kg (lbs) 16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27 (59.5)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 3 2011 12:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 365

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7755.00 Dual Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: 2-8/0-8
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 62
Vertical beam width, -3 dB () 7.4 7 6.9 6.4 6.1
Electrical down tilt () 2 - 8 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@
2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 -
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.5 <1 <3.5
First null fill (dB) >-25 >-25 >-25 >-25 <-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) 16 14 16 16 16
Cross polar discrimination (XPD) 60 (dB) >11 > 9.5 > 6.3 >7.2 >7.5
Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x125mm (88x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 25.1 (55)
Weight, without brackets, kg (lbs) 19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2800x355x255 (92x12x10)
Shipping weight, kg (lbs) 32.5 (71.6)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Dec 2 2010 6:02AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 366

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7755.00A Dual Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: 2-8/0-8
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 62
Vertical beam width, -3 dB () 7.4 7 6.9 6.4 6.1
Electrical down tilt () 2 - 8 0 - 8
Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@
2,4,6,8 2,4,6,8 0,2,4,6,8 0,2,4,6,8 0,2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.5 <1 <3.5
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) >16 >14 >16 >16 >16
Cross polar discrimination (XPD) 60 (dB) >11 > 9.5 > 6.3 >7.2 >7.5
Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x125mm (88x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 25.1 (55)
Weight, without brackets, kg (lbs) 19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light grey
Packing size, HxWxD, mm (ft) 2800x355x255 (92x12x10)
Shipping weight, kg (lbs) 32.5 (71.6)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 7:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 367

POWERWAVE

Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65
14.7/12.6, 14.6/12.5,
14.6/12.5
MET 1.4m (47) 7780.00 369
65
14.7/12.6, 14.6/12.5,
14.6/12.5
MET 1.4m (47) 7780.00A 370
65
16.2/14.1, 16.5/14.4,
16.5/14.4
MET 2.0m (66) 7782.00 371
65
16.2/14.1, 16.5/14.4,
16.5/14.4
MET 2.0m (66) 7782.00A 372
65
17.3/15.2, 17.9/15.8,
17.9/15.8
MET 2.6m (86) 7785.00 373
65
17.3/15.2, 17.9/15.8,
17.9/15.8
MET 2.6m (86) 7785.00A 374
Triple Broadband Antennas
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
368

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7780.00 Triple Broadband Cross Polarized
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7
TILT: 2-12/0-12/0-12
LENGTH: 1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12.0
Electrical down tilt () 2 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) 30 30 30 30 >30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x125mm (47x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19 (42)
Weight, without brackets, kg (lbs) 13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 23 (50.7)
RET 8210.40, 8210.10, 8230.40, 8230.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Nov 30 2010 3:39AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 369

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7780.00A Triple Broadband Cross Polarized
POLARIZATION:XXX-Pol
FREQUENCY (MHz):824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):14.7/12.6, 14.6/12.5, 14.6/12.5
TILT:2-12/0-12/0-12
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 62
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 2 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) 30 30 30 30 >30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60(dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 18030copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 18030total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0(dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60(dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x125mm (47x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19 (42)
Weight, without brackets, kg (lbs) 13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 23 (50.7)
RET 8230.10,8230.40, 8210.10,8210.40
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 12:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 370

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7782.00 Triple Broadband Cross Polarized
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9/0-10/0-10
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 2 - 9 0 - 10
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,9 2,5,7,9 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x125mm (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 23.4 (48)
Weight, without brackets, kg (lbs) 17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 28 (61.7)
RET 8210.40, 8210.10, 8230.40, 8230.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Mar 23 2011 10:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 371

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7782.00A Triple Broadband Cross Polarized
POLARIZATION: XXX-pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9/0-10/0-10
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14.0 16.5/14.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 2 - 9 0 - 10
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ > 18, 17, 16, 16@ > 17, 15, 13@ > 17, 15, 14@ > 17, 16, 15@
2,5,7,9 degree 2,5,7,9 degree 0, 6, 10 degree 0, 6, 10 degree 0, 6, 10 degree
Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30
Inter band Isolation (dB) > 34 > 34
Tracking, horizontal plane 60 (dB) < 1 < 1 < 1.5 < 2 < 4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar > 28 > 30 > 27 > 28 > 30
Front to back ratio (dB) 180 30 total power > 26 > 26 > 25 > 27 > 27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) > 11 > 9 > 7 > 6 > 6
Far field coupling < 0.27 < 0.47 < 0.52 < 0.66 < 0.66
IM3, 2xTx&43dBm (dBc) < -150 < -150
IM7, 2xTx&43dBm (dBc) - < -160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x125 (68x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 23.4 (48)
Weight, without brackets, kg (lbs) 17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 28 (61.7)
RET 8210.40, 8210.10, 8230.40, 8230.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 372

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7785.00 Triple Broadband Cross Polarized
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8
TILT: 2-8/0-8/0-8
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.7/14.6 17.3/15.2 17.3/15.2 17.5/15.4 17.9/15.8
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 66 65 62
Vertical beam width, -3 dB () 7.4 6.9 6.7 6.4 6.2
Electrical down tilt () 2 - 8 0 - 8
Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >17,16,15,14,13@ >17,16,16,15,15@
2,4,6,8 2,4,6,8 0,2,4,6,8 0,2,4,6,8 0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <1 <1 <1.1 <1.0 <2.9
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 -
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x125mm (88x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.7 (61)
Weight, without brackets, kg (lbs) 22.2 (49)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2800x355x255 (92x12x10)
Shipping weight, kg (lbs) 33 (72.7)
RET 8210.40, 8210.10, 8230.40, 8230.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Nov 30 2010 4:04AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 373

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7785.00A Triple Broadband Cross Polarized
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8
TILT: 2-8/0-8/0-8
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-896 870-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.7/14.6 17.3/15.2 17.3/15.2 17.5/15.4 17.9/15.8
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 66 65 62
Vertical beam width, -3 dB () 7.4 6.9 6.7 6.4 6.2
Electrical down tilt () 2 - 8 0 - 8
Side lobe suppression, vertical 1st upper (dB) >17,16,15,14@ >17,16,15,14@ >17,16,15,14,13@ >17,16,15,14,13@ >17,16,16,15,15@
2,4,6,8 2,4,6,8 0,2,4,6,8 0,2,4,6,8 0,2,4,6,8
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <1 <1 <1.1 <1.0 <2.9
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) > 12 >9.5 >7.0 > 7.5 > 7.7
Far field coupling <0.24 <0.44 < 0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x125mm (88x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.7 (61)
Weight, without brackets, kg (lbs) 22.2 (49)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2800x355x255 (92x12x10)
Shipping weight, kg (lbs) 33 (72.7)
RET 8210.40, 8210.10, 8230.40, 8230.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 1:02AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 374

POWERWAVE

Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65
17.4/15.3, 17.6/15.5,
17.4/15.3
2-8/2-10/2-10 2.6m (86) P65-18-XDHW2-N 376
65
16.0/13.9, 15.9/13.8,
15.8/13.7
2-10/2-12/2-12 2.0m (66) P65-17-XDHW2-N 378
65
14.5/12.4, 14.6/12.5,
14.4/12.3
2-12/2-14/2-14 1.4m (47) P65-15-XDHW2-N 380
Triple Broadband Antennas
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz
375

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-18-XDHW2-N


Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
G Three independent arrays under one radome
G Aperture Coupled Patch technology for best in class performance
G Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) 790-960 1710-2170 2500-2690
Frequency band (MHz) 790-894 870-960 1710-1880 1900-2170 2500-2690 2500-2690
Gain (dBi/dBd) 16.4/14.3 17.6/15.5 17.4/15.3 17.8/15.7 17.4/15.3 17.4/15.3
Polarization Dual linear 45 Dual linear 45 Dual linear 45
Nominal Impedance () 50 50 50
VSWR <1.5:1 <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 72 67 63 60 62 62
Front to back ratio (dB)
G copolar 180 30
G total power 180 30
>23
>21
>27
>24
>27
>25
>27
>25
>27
>25
28
27
Cross polar discrimination (XPD)
G Boresight 0 (dB)
G Sector 60 (dB)

>13
-

>13
-

>13
-

>13
-

>13
-

13
-
Vertical beam width, -3 dB () 7.5 6.9 6.9 6.2 5.0 5.0
Electrical down tilt () 2 - 8 2 - 10 2 - 10
1st Upper Side Lobe suppression,
typical (dB)
>15 >15 >15 >15 >15 >15
Isolation, Intersystem, (dB) >30 >30 >30 >30 >30 >30
Isolation, Interband, typical, (dB) >30
Intermodulation Products 3rd Order,
2 x 43dBm,(dBc)
<-150 <-150 <-153
Intermodulation Products 5th Order,
2 x 43dBm,(dBc)
- <-160 <-160
Power handling, average per input (W) 200 200 200
Power handling, average total (W) 400 400 400
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Oct 30 2011 2:07PM
376

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-18-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2705x282x155mm(106x11x6)
Weight, with brackets, kg (lbs) 28.0(61.6)
Weight, without brackets, kg (lbs) 22.5(49.5)
Packing size, HxWxD, mm (ft) 2845x486x290(112x19x11)
Packing weight, kg (lbs) 34.4(75.7)
frontal: 883
Wind load at 150kmh, (N) lateral: 188
rear side: 1062
Maximum wind speed, kmh (mph) 42(93)
Survival wind speed, kmh (mph) 55(123)
Radome Material ASA
Radome colour Light Gray
Operating Temperature, C -40C to +60C
Environmental conditions ETS 300 019-1-4 class 4.1E
Lightning protection DC Grounded
Mounting Pre-mounted heavy duty brackets
REMOTE ELECTRICAL TILT
RET module
AISG2.0(AISG1.1/Ericsson)
8210.40, 8211.40, 8212.40, 8230.40
RET module
AISG1.1(AISG2.0/Ericsson)
8210.10, 8211.10, 8212.10, 8230.10
INTERFACE VIEW


NOTES




Antenna installations must be grounded according to local and
national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.
Every electrical and telephone wire is potential
dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.
ANTENNA MOUNTS
7454.00A Triple Mount Bracket
7256.00 Heavy Duty Tilt Bracket 1-4.5

880MHz 2dt

1880MHz 2dt

2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Oct 30 2011 2:07PM
377

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-17-XDHW2-N


Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
G Three independent arrays under one radome
G Aperture Coupled Patch technology for best in class performance
G Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) 790-960 1710-2170 2500-2690
Frequency band (MHz) 790-894 870-960 1710-1880 1900-2170 2500-2690 2500-2690
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.0/13.9 15.8/13.7 15.8/13.7
Polarization Dual linear 45 Dual linear 45 Dual linear 45
Nominal Impedance () 50 50 50
VSWR <1.5:1 <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 72 67 66 63 66 66
Front to back ratio (dB)
G copolar 180 30
G total power 180 30
>23
>21
>27
>24
>27
>25
>27
>25
>27
>25
27
25
Cross polar discrimination (XPD)
G Boresight 0 (dB)
G Sector 60 (dB)

>13
-

>13
-

>13
-

>13
-

>13
-

13
-
Vertical beam width, -3 dB () 9.9 9.0 8.9 8.3 7.6 7.6
Electrical down tilt () 2 - 9 2 - 12 2 - 12
1st Upper Side Lobe suppression,
typical (dB)
>15 >15 >15 >15 >15 >15
Isolation, Intersystem, (dB) >30 >30 >30 typ. >30 typ. >30 typ. >30
Isolation, Interband, typical, (dB) >30
Intermodulation Products 3rd Order,
2 x 43dBm,(dBc)
<-150 <-150 <-153
Intermodulation Products 5th Order,
2 x 43dBm,(dBc)
- <-160 <-160
Power handling, average per input (W) 200 200 200
Power handling, average total (W) 400 400 400
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Oct 30 2011 2:05PM
378

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-17-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2053x282x155mm (81x11x6)
Weight, with brackets, kg (lbs) 23.9 (52.4)
Weight, without brackets, kg (lbs) 18.4 (40.5)
Packing size, HxWxD, mm (ft) 2140x486x290 (84x19x11)
Packing weight, kg (lbs) 28.6 (63.0)
frontal: 675
Wind load at 150kmh, (N) lateral: 143
rear side: 811
Maximum wind speed, kmh (mph) 42 (93)
Survival wind speed, kmh (mph) 55 (123)
Radome Material ASA
Radome colour Light Grey
Operating Temperature, C -40C to +60C
Environmental conditions ETS 300 019-1-4 class 4.1E
Lightning protection DC grounded
Mounting Pre-mounted standard brackets
REMOTE ELECTRICAL TILT
RET module
AISG2.0(AISG1.1/Ericsson)
8210.40, 8211.40, 8212.40, 8230.40
RET module
AISG1.1(AISG2.0/Ericsson)
8210.10, 8211.10, 8212.10, 8230.10
INTERFACE VIEW


NOTES




Antenna installations must be grounded according to local and
national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.
Every electrical and telephone wire is potential
dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.
ANTENNA MOUNTS
7454.00A Triple Mount Bracket
7256.00 Heavy Duty Tilt Bracket 1-4.5

880MHz 2dt
1880MHz 2dt

2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Oct 30 2011 2:05PM
379

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-15-XDHW2-N


Triple Broadband 790-960/1710-2170/2500-2690MHz
Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.
Features:
G Three independent arrays under one radome
G Aperture Coupled Patch technology for best in class performance
G Compatible with Powerwave RET modules
ELECTRICAL SPECIFICATIONS
Frequency range (MHz) 790-960 1710-2170 2500-2690
Frequency band (MHz) 790-894 870-960 1710-1880 1900-2170 2500-2690 2500-2690
Gain (dBi/dBd) 14.2/12.1 14.7/12.6 14.4/12.3 14.5/12.4 14.4/12.3 14.4/12.3
Polarization Dual linear 45 Dual linear 45 Dual linear 45
Nominal Impedance () 50 50 50
VSWR <1.5:1 <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 73 67 63 60 65 65
Front to back ratio (dB)
G copolar 180 30
G total power 180 30
>23
>21
>27
>24
>27
>24
>27
>24
>27
>24
27
24
Cross polar discrimination (XPD)
G Boresight 0 (dB)
G Sector 60 (dB)

>13
-

>13
-

>13
-

>13
-

>13
-

13
-
Vertical beam width, -3 dB () 15.5 13.8 14.4 12.4 13.6 13.6
Electrical down tilt () 2 - 12 2 - 14 2 14
1st Upper Side Lobe suppression,
typical (dB)
>15 >15 >15 >15 >15 >15
Isolation, Intersystem, (dB) >30 typ. >30 typ. >30 >30 >30 >30
Isolation, Interband, typical, (dB) >30
Intermodulation Products 3rd Order,
2 x 43dBm,(dBc)
<-150 <-150 <-153
Intermodulation Products 5th Order,
2 x 43dBm,(dBc)
- <-160 <-160
Power handling, average per input (W) 200 200 200
Power handling, average total (W) 400 400 400
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 1 of 2
Updated: Oct 30 2011 2:04PM
380

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

Triple Broadband Antennas
P65-15-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1432x282x155mm (56.4x11x6)
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14.2 (31.2)
Packing size, HxWxD, mm (ft) 1565x486x290 (61.6x19x11)
Packing weight, kg (lbs) 23.9 (52.6)
frontal: 431
Wind load at 150kmh, (N) lateral: 97
rear side: 517
Maximum wind speed, kmh (mph) 42 (93)
Survival wind speed, kmh (mph) 55 (123)
Radome Material ASA
Radome colour Light Grey
Operating Temperature, C -40C to +60C
Environmental conditions ETS 300 019-1-4 class 4.1E
Lightning protection DC grounded
Mounting Pre-mounted heavy duty brackets
REMOTE ELECTRICAL TILT
RET module
AISG2.0(AISG1.1/Ericsson)
8210.40, 8211.40,8212.40, 8230.40
RET module
AISG1.1(AISG2.0/Ericsson)
8210.10, 8211.10,8212.10, 8230.10
INTERFACE VIEW


NOTES




Antenna installations must be grounded according to local and
national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.
Every electrical and telephone wire is potential
dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.
ANTENNA MOUNTS
7454.00A Triple Mount Bracket
7256.00 Heavy Duty Tilt Bracket 1-4.5
880MHz 2dt 1880MHz 2dt 2650MHz 2dt
Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Page 2 of 2
Updated: Oct 30 2011 2:04PM
381
The Powerwave single band antennas outstanding
performance in the feld derives from excellent voltage
standing wave ratio (VSWR), isolation beam squint and
tracking. This design ensures minimized intermodulation
products, thus substantially enhancing system benefts.
The Powerwave polarization diversity systems use one
antenna with two orthogonal polarizations slanted at 45
to provide the independently fading signals needed for
achieving top- quality coverage. As a result of thorough,
in-depth research and testing, Powerwave has produced
a variety of designs that ensure the isolation, cross
polarization discrimination and orthogonality between inputs
needed to achieve the highest possible diversity gain,
hence the most effcient system performance.
Single and Dual Band Antennas
Power wave
382

POWERWAVE

Single Band Antennas
Cross Polarized Page
ALX Cross Polarized Antennas, 806-896 MHz 384
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz 386

Vertical Polarized Page
Omni Vertical Cross Polarized Antennas, 806-896 MHz 406
Urban Vertical Polarized Antennas, 824-896/870-960 MHz 414

Vertical Polarized Page
ALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz 438
Single and Dual Band Antennas
Single and Dual Band Antennas
383

POWERWAVE

Single Band Antennas
Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
90 10.5/8.4 FET 0.7m (2'3") 7390.00B 385
Single Band Antennas
ALX Cross Polarized Antennas, 806-896 MHz
384

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7390.00B ALX Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):806-896
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):10.5/8.4
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896
Frequency band (MHz) 806-896
Gain (dBi/dBd) 10.5/8.4
Polarization Linear slanted
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 29
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >13
First null fill (dB) -
Vertical beam squint () <2
Front to back ratio (dB) 18030coplanar >19
Front to back ratio (dB) 180 30total power >17
Cross polar discrimination (XPD) 0(dB) >13
Cross polar discrimination (XPD)60(dB)
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 710x280x125 (24x11x5)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.7 (17)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
189
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 850x355x200 (29x12x10)
Shipping weight, kg (lbs) 9.5 (20.9)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08018 Rev A Updated: Jul 15 2011 1:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 385

POWERWAVE

Single Band Antennas
Cross Polarized
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 12.5/10.4 FET 0.7m (2'3") 7216.03 387
65 12.5/10.4 FET 0.7m (2'3") 7282.03 388
65 14.5/12.4 FET 1.3m (4'3") 7217.11 389
65 15.5/13.4 FET 1.3m (4'3") 7217.04 390
65 15/12.9 FET 1.3m (4'3") 7217.03 391
65 15/12.9 FET 1.3m (4'3") 7263.01 392
65 15/12.9 FET 1.3m (4'3") 7263.04 393
65 16.5/14.4 FET 1.9m (6'2") 7255.03 394
65 16.5/14.4 FET 1.9m (6'2") 7281.02 395
65 16.5/14.4 FET 1.9m (6'2") 7281.04 396
65 17.5/15.4 FET 2.6m (8'6") 7218.03 397
65 17.5/15.4 FET 2.6m (8'6") 7218.04 398
65 17.5/15.4 FET 2.6m (8'6") 7218.13 399
65 17.5/15.4 FET 2.6m (8'6") 7218.14 400
65 17/14.9 FET 1.9m (6'2") 7255.04 401
65 18/15.9 FET 2.6m (8'6") 7218.05 402
65 18/15.9 FET 2.6m (8'6") 7218.09 403
65 18/15.9 FET 2.6m (8'6") 7218.15 404
65 18/15.9 FET 2.6m (8'6") 7218.19 405
Single Band Antennas
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
386

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7216.03 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):12.5/10.4
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 12.5/10.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 26
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >10
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB)
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 660x256x50 (22x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.3 (16)
Weight, without brackets, kg (lbs) 3.6 (7.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour
Packing size, HxWxD, mm (ft) 770x308x121 (26x1x5)
Shipping weight, kg (lbs) 7.5 (16.5)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08069 Rev A Updated: May 12 2011 3:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 387

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7282.03 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):12.5/10.4
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 12.5/10.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 25
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) >9
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >22
Front to back ratio (dB) 180 30total power >18
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 660x256x50 (22x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 750x308x121 (26x1x5)
Shipping weight, kg (lbs) 5 (11)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08142 Rev A Updated: May 25 2011 12:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 388

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7217.11 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):14.5/12.4
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 14.5/12.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 13
Electrical down tilt () 9
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >23
Front to back ratio (dB) 180 30total power >19
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 8.5 (18.7)
Weight, without brackets, kg (lbs) 4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 10 (22)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08072 Rev A Updated: May 25 2011 12:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 389

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7217.04 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.5/13.4
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 15.5/13.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 13
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 8.5 (18.7)
Weight, without brackets, kg (lbs) 4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 10 (22)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08071 Rev A Updated: May 25 2011 12:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 390

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7217.03 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 15/12.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 13
Electrical down tilt () 7
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 8.5 (18.7)
Weight, without brackets, kg (lbs) 4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 10 (22)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08070 Rev A Updated: May 25 2011 12:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 391

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7263.01 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 15/12.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 13
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >22
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (52x10.4x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.5 (16.5)
Weight, without brackets, kg (lbs) 7.5 (16.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (56x12x5)
Shipping weight, kg (lbs) 8.5 (19)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08126 Rev A Updated: May 25 2011 12:43AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 392

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7263.04 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 15/12.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 13
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >22
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (52x10.4x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.5 (16.5)
Weight, without brackets, kg (lbs) 7.5 (16.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (56x12x5)
Shipping weight, kg (lbs) 8.5 (19)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08127 Rev A Updated: May 25 2011 12:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 393

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7255.03 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 16.5/14.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 14.2 (31.3)
Weight, without brackets, kg (lbs) 10.5 (23.1)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 12 (26.5)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08081 Rev A Updated: May 25 2011 12:41AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 394

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7281.02 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 16.5/14.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 14.5 (31.9)
Weight, without brackets, kg (lbs) 9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 10 (22)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08132 Rev A Updated: May 25 2011 12:45AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 395

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7281.04 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 16.5/14.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >14
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 14.5 (31.9)
Weight, without brackets, kg (lbs) 9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 10 (22)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08223Rev A Updated: May 25 2011 12:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 396

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.03 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.5/15.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17.5/15.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) -
Vertical beam squint () <0.5
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 20.2 (44.5)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08073 Rev A Updated: May 25 2011 12:34AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 397

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.04 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.5/15.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17.5/15.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) -
Vertical beam squint () <0.5
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 20.2 (44.5)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08074 Rev A Updated: May 25 2011 12:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 398

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.13 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.5/15.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17.5/15.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.5
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 22.3 (49.1)
Weight, without brackets, kg (lbs) 16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08077 Rev A Updated: May 25 2011 12:38AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 399

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.14 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.5/15.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17.5/15.4
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.5
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 22.3 (49.1)
Weight, without brackets, kg (lbs) 16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7256.00, 7454.00,
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08078 Rev A Updated: May 25 2011 12:39AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 400

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7255.04 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):880-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17/14.9
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 880-960
Frequency band (MHz) 880-960
Gain (dBi/dBd) 17/14.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 14.2 (31.3)
Weight, without brackets, kg (lbs) 10.5 (23.1)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 12 (26.5)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08082 Rev A Updated: May 25 2011 12:42AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 401

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.05 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 20.2 (44.5)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7218.05 Updated: May 25 2011 12:36AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 402

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.09 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 20.2 (44.5)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08076 Rev A Updated: May 25 2011 12:37AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 403

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.15 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.3
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 22.3 (49.1)
Weight, without brackets, kg (lbs) 16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08079 Rev A Updated: May 25 2011 12:39AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 404

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7218.19 X-Urban Cross Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear slanted 45
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) -
Vertical beam squint () <0.4
Front to back ratio (dB) 18030coplanar >24
Front to back ratio (dB) 180 30total power >20
Cross polar discrimination (XPD) 0(dB) >20
Cross polar discrimination (XPD)60(dB) >10
Far field coupling -
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 22.3 (49.1)
Weight, without brackets, kg (lbs) 16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 18 (39.7)
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08080 Rev A Updated: May 25 2011 12:40AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 405

POWERWAVE

Single Band Antennas
Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
360 11/8.9 FET 3.14m (10'4") 4168.21.33.00 407
360 11/8.9 FET 3.14m (10'4") 4168.21.33.03 408
360 11/8.9 FET 3m (910") 4168.11.33.00 409
360 11/8.9 FET 3m (910") 4168.11.33.02 410
360 11/8.9 FET 3m (910") 4168.11.33.03 411
360 11/8.9 FET 3m (910") 4168.11.33.06 412
360 11/8.9 FET 3m (910") 4168.11.33.52 413
Single Band Antennas
Omni Vertical Polarized Antennas, 806-896 MHz
406

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.21.33.00 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3.14m (104)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3140x78 (104x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
204
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08113 Rev A Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 407

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.21.33.03 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3.14m (104)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 3
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3140x78 (104x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
204
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08114 Rev A Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 408

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.11.33.00 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3m (910)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3000x78 (910x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08105 Rev A Updated: Apr 5 2010 11:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 409

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.11.33.02 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3m (910)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3000x78 (910x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08109 RevA Updated: Apr 5 2010 11:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 410

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.11.33.03 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3m (910)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 3
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3000x78 (910x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08106 Rev A Updated: Apr 5 2010 11:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 411

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.11.33.06 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3m (910)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3000x78 (910x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08107 Rev A Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 412

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
4168.11.33.52 Omni Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):11/8.9
TILT:FET
LENGTH:3m (910)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 11/8.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 360
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2 uptilt
Side lobe suppression, vertical 1st upper (dB) 12
First null fill (dB) -
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 3000x78 (910x3)
Mounting Pre-mounted bracket
Weight, with brackets, kg (lbs) 12.5 (27.5)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 3300x150x170 (1010x6x7)
Shipping weight, kg (lbs) 16 (35.2)
Brackets included
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08111 Rev A Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 413

POWERWAVE

Single Band Antennas
Vertical Polarized
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 12.5/10.4 FET 0.7m (2'3") 7270.02 415
65 13/10.9 FET 0.7m (2'3") 7225.04 416
65 15.5/13.4 FET 1.3m (4'3") 7226.03 417
65 15.5/13.4 FET 1.3m (4'3") 7226.04 418
65 15.5/13.4 FET 1.3m (4'3") 7271.02 419
65 15/12.9 FET 1.3m (4'3") 7271.03 420
65 17.5/15.4 FET 2.6m (8'6") 7273.03 421
65 17/14.9 FET 1.9m (6'2") 7227.14 422
65 17/14.9 FET 1.9m (6'2") 7227.04 423
65 17/14.9 FET 2m (6'6") 7272.02 424
65 18/15.9 FET 2.6m (8'6") 7228.03 425
65 18/15.9 FET 2.6m (8'6") 7228.04 426
65 18/15.9 FET 2.6m (8'6") 7228.06 427
65 18/15.9 FET 2.6m (8'6") 7228.08 428
65 18/15.9 FET 2.6m (8'6") 7273.02 429
90 12/9.9 FET 0.7m (2'3") 7230.04 430
90 14/11.9 FET 1.3m (4'3") 7231.04 431
90 14/11.9 FET 1.3m (4'3") 7231.06 432
90 15/12.9 FET 1.9m (6'2") 7232.04 433
90 15/12.9 FET 1.9m (6'2") 7232.07 434
90 16.5/14.4 FET 2.6m (8'6") 7233.04 435
90 16.5/14.4 FET 2.6m (8'6") 7233.06 436
90 16.5/14.4 FET 2.6m (8'6") 7233.08 437
Single Band Antennas
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
414

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7270.02 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):12.5/10.4
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 12.5/10.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 28
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >10
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >24
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 300

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 660x256x50 (22x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7.7 (16.9)
Weight, without brackets, kg (lbs) 4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 770x308x121 (26x1x5)
Shipping weight, kg (lbs) 8.3 (18.2)
Brackets 7456.00A,7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08048 Rev A Updated: Jun 6 2011 2:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 415

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7225.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):13/10.9
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 13/10.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 26
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >9
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >25
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 300

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 660x256x50 (22x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 8.7 (19.1)
Weight, without brackets, kg (lbs) 5 (11)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 770x308x121 (26x1x5)
Shipping weight, kg (lbs) 6 (13.2)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08054 Rev A Updated: Jun 6 2011 2:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 416

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7226.03 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.5/13.4
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 15.5/13.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 14
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >25
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 10.7 (23.5)
Weight, without brackets, kg (lbs) 7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 8.5 (18)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08055 Rev A Updated: Jun 6 2011 2:26AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 417

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7226.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.5/13.4
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 15.5/13.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 14
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >23
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 10.7 (23.5)
Weight, without brackets, kg (lbs) 7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 8.5 (18)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08056 Rev A Updated: Jun 6 2011 2:26AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 418

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7271.02 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15.5/13.4
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 15.5/13.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 14
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >24
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2 )
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 10.7 (23.5)
Weight, without brackets, kg (lbs) 7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 8.5 (18.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08049 Rev A Updated: Jun 6 2011 2:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 419

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7271.03 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 15/12.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 14
Electrical down tilt () 5
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >24
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x256x50 (44x10x2 )
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 10.7 (23.5)
Weight, without brackets, kg (lbs) 7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x308x121 (48x1x5)
Shipping weight, kg (lbs) 8.5 (18.7)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08050 Rev A Updated: Jun 6 2011 2:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 420

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7273.03 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17.5/15.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 17.5/15.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 7
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >22
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 17.7 (39)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2650x308x121 (88x1x5)
Shipping weight, kg (lbs) 18.8 (41.4)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08128 Rev A Updated: Jun 6 2011 2:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 421

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7227.14 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17/14.9
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17/14.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-13
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >23
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIM female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 14.1 (31)
Weight, without brackets, kg (lbs) 10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1199
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 13 (29)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:17AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 422

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7227.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17/14.9
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 17/14.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-13
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >23
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 14.1 (31)
Weight, without brackets, kg (lbs) 10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (69x1x5)
Shipping weight, kg (lbs) 13 (29)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08057 Rev A Updated: Jun 6 2011 2:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 423

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7272.02 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):17/14.9
TILT:FET
LENGTH:2m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 17/14.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 9.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) >-20
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x256x50 (64x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 14.7 (32.4)
Weight, without brackets, kg (lbs) 11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x308x121 (48x1x5)
Shipping weight, kg (lbs) 14.8 (32.6)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08051 Rev A Updated: Jun 6 2011 2:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 424

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7228.03 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.0/15.9
TILT:0
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18.0/15.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >19
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >23
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x N-female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 17.0 (37.9)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 425

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7228.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18.0/15.9
TILT:0
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18.0/15.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >19
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >23
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 17.0 (37.9)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 426

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7228.06 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >25
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 17 (379)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08059 Rev A Updated: Jun 6 2011 2:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 427

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7228.08 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 18/15.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >25
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 16.5 (36.3)
Weight, without brackets, kg (lbs) 10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x308x121 (810x1x5)
Shipping weight, kg (lbs) 17 (379)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08060 Rev A Updated: Jun 6 2011 2:28AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 428

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7273.02 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):824-896
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):18/15.9
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-896
Frequency band (MHz) 824-896
Gain (dBi/dBd) 18/15.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 7
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >18
First null fill (dB) >-20
Vertical beam squint () 0.5
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x256x50 (86x10x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 17.7 (39)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2650x308x121 (88x1x5)
Shipping weight, kg (lbs) 18.8 (41.4)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08052 Rev A Updated: Jun 6 2011 2:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 429

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7230.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):12/9.9
TILT:FET
LENGTH:0.7m (23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 12/9.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 27
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >12
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 300

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 695x160x55 (23x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 7 (15.4)
Weight, without brackets, kg (lbs) 3.3 (7.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
154
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 805x216x156 (28x9x6)
Shipping weight, kg (lbs) 7.5 (16.5)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08061 Rev A Updated: Jun 6 2011 2:28AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 430

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7231.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):14/11.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 14/11.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 14
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x160x55 (44x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x216x156 (48x9x6)
Shipping weight, kg (lbs) 11 (24.2)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08062 Rev A Updated: Jun 6 2011 2:28AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 431

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7231.06 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):14/11.9
TILT:FET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 14/11.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 14
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x160x55 (44x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 9.7 (21.3)
Weight, without brackets, kg (lbs) 6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1430x216x156 (48x9x6)
Shipping weight, kg (lbs) 11 (24.2)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08063 Rev A Updated: Jun 6 2011 2:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 432

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7232.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 15/12.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 9
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x160x55 (64x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 13.7 (30.2)
Weight, without brackets, kg (lbs) 10 (22)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
502
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x216x156 (69x9x6)
Shipping weight, kg (lbs) 15 (33)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08064 Rev A Updated: Jun 6 2011 2:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 433

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7232.07 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):15/12.9
TILT:FET
LENGTH:1.9m (62)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 15/12.9
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 9
Electrical down tilt () 4
Side lobe suppression, vertical 1st upper (dB) >15
First null fill (dB) >-15
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1940x160x55 (64x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 13.7 (30.2)
Weight, without brackets, kg (lbs) 10 (22)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
502
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2050x216x156 (69x9x6)
Shipping weight, kg (lbs) 15 (33)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08065 Rev A Updated: Jun 6 2011 2:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 434

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7233.04 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 16.5/14.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 0
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x160x55 (86x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 13.8 (30.4)
Weight, without brackets, kg (lbs) 8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x216x156 (810x9x6)
Shipping weight, kg (lbs) 15 (33)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08066 Rev A Updated: Jun 6 2011 2:30AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 435

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7233.06 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 16.5/14.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 6
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x160x55 (86x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 13.8 (30.4)
Weight, without brackets, kg (lbs) 8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x216x156 (810x9x6)
Shipping weight, kg (lbs) 15 (33)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08067 Rev A Updated: Jun 6 2011 2:30AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 436

POWERWAVE Single Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7233.08 Urban Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):870-960
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):16.5/14.4
TILT:FET
LENGTH:2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 870-960
Frequency band (MHz) 870-960
Gain (dBi/dBd) 16.5/14.4
Polarization Linear vertical
Nominal Impedance () 50
VSWR <1.3:1
Horizontal beam width, -3 dB () 90
Vertical beam width, -3 dB () 6.5
Electrical down tilt () 2
Side lobe suppression, vertical 1st upper (dB) >17
First null fill (dB) >-20
Vertical beam squint () 0.5
Front to back ratio (dB) 18030coplanar >20
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2580x160x55 (86x6x2)
Mounting Pre-mounted standard bracket
Weight, with brackets, kg (lbs) 13.8 (30.4)
Weight, without brackets, kg (lbs) 8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph) 42
Survival wind speed, m/s (mph) 55
Lightning protection DC grounded
Operating Temperature
Radome Material PVC
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2690x216x156 (810x9x6)
Shipping weight, kg (lbs) 15 (33)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-8068 Rev A Updated: Jun 6 2011 2:30AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 437

POWERWAVE

Dual Band Antennas
Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 14.5/12.4, 17.5/15.4 MET 1.3m (4'3") 7840.00 439
70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.02B 440
70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.00B 441
70 14.5/12.4, 17.5/15.4 FET 1.4m (4'7") 7333.06B 442
80 14.0/11.9, 17.0/14.9 FET 1.4m (4'7") 7332.02B 443
80 14.0/11.9, 17.0/14.9 FET 1.4m (4'7") 7332.06B 444
90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.02B 445
90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7332.00B 446
90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.00B 447
90 13.5/12.4, 16.5/14.4 FET 1.4m (4'7") 7334.06B 448
90 14.0/11.9, 17.0/14.9 FET 1.3m (4'3") 7850.00B 449
Dual Band Antennas
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
438

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7840.00 ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():65
GAIN (dBi dBd):14.5/12.4, 17.5/15.4
TILT:MET
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 824-896 1850-1990
Gain (dBi/dBd) 14/11.9 17.5/15.4
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 73 68
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 0-12 0-8
Side lobe suppression, vertical 1st upper (dB) >15 >15
First null fill (dB) - -18
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >25 >25
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 400 200

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1331x280x125 (44x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 17.5 (38.5)
Weight, without brackets, kg (lbs) 12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
388
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1495x355x255 (411x12x10)
Shipping weight, kg (lbs) 15.8 (34.8)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031- Updated: May 6 2011 6:14AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 439

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7333.02B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():70
GAIN (dBi dBd):14.5/12.4, 17.5/15.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14.8/12.7 17.6/15.5
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 72 71
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >28 >28
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev. A Updated: May 6 2011 3:06AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 440

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7333.00B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():70
GAIN (dBi dBd):14.5/12.4, 17.5/15.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14.8/12.7 17.6/15.5
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 72 70
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 0 0
Side lobe suppression, vertical 1st upper (dB) >16 >16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >28 >28
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev A Updated: May 6 2011 5:22AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 441

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7333.06B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():70
GAIN (dBi dBd):14.5/12.4, 17.5/15.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14.8/12.7 17.6/15.5
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 72 71
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 6 6
Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >28 >28
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08155 Rev A Updated: May 6 2011 5:23AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 442

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7332.02B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():80
GAIN (dBi dBd):14.0/11.9, 17.0/14.9
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14/11.9 17.2/15.1
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 81 79
Vertical beam width, -3 dB () 15.5 7
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) >16 >16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >27 >27
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 350

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev. A Updated: May 6 2011 3:03AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 443

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7332.06B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():80
GAIN (dBi dBd):14.0/11.9, 17.0/14.9
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14/11.9 17.2/15.1
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 81 79
Vertical beam width, -3 dB () 15.5 7
Electrical down tilt () 6 6
Side lobe suppression, vertical 1st upper (dB) >16 >16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >27 >27
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 350

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08153 Rev A Updated: May 6 2011 5:22AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 444

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7334.02B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):13.5/12.4, 16.5/14.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 13.5/11.4 16.5/14.4
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 89 91
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >26 >26
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev. A Updated: May 6 2011 3:08AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 445

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7332.00B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):13.5/12.4, 16.5/14.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 13.5/12.4 17.6/15.516.5/14.4
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 89 91
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 2 2
Side lobe suppression, vertical 1st upper (dB) >16 >16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >26 >26
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev A Updated: May 6 2011 5:13AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 446

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7334.00B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):13.5/12.4, 16.5/14.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 14/11.9 16.5/14.4
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 89 91
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 0 0
Side lobe suppression, vertical 1st upper (dB) >16 >16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >26 >26
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev A Updated: May 6 2011 5:26AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 447

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7334.06B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):13.5/12.4, 16.5/14.4
TILT:FET
LENGTH:1.4m (47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 13.5/11.4 16.5/14.4
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.4:1 <1.4:1
Horizontal beam width, -3 dB () 89 91
Vertical beam width, -3 dB () 15 7
Electrical down tilt () 6 6
Side lobe suppression, vertical 1st upper (dB) >16/16 >16/16
First null fill (dB) - -17
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >26 >26
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 350 175

MECHANICAL SPECIFICATIONS*
Connector 1 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1350x280x125 (45x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 14.9 (32.8)
Weight, without brackets, kg (lbs) 9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1520x355x200 (5x12x10)
Shipping weight, kg (lbs) 13.9 (30.6)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08157 Rev A Updated: May 6 2011 5:28AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 448

POWERWAVE Dual Band Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7850.00B ALVC Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):806-896, 1850-1990
HORIZONTAL BEAM WIDTH ():90
GAIN (dBi dBd):14.0/11.9, 17.0/14.9
TILT:0-12/0-8
LENGTH:1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 806-896 1850-1990
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 13.8/11.7 16/13.9
Polarization Vertical linear Vertical linear
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 90 90
Vertical beam width, -3 dB () 15 6.5
Electrical down tilt () 0-12 0-8
Side lobe suppression, vertical 1st upper (dB) >18 >18
First null fill (dB) - -18
Vertical beam squint () <0.5 <0.5
Front to back ratio (dB) 18030coplanar >26 >26
IM3, 2xTx&43dBm (dBc) <-150 <-150
Power handling, average total (W) 400 200

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1331x280x125 (44x11x5)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 17.5 (38.5)
Weight, without brackets, kg (lbs) 12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
388
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (198)
Lightning protection DC grounded
Operating Temperature
Radome Material GRP
Radome colour Light gray RAL 7035 on all visible plastic parts
Packing size, HxWxD, mm (ft) 1495x355x255 (411x12x10)
Shipping weight, kg (lbs) 15.8 (34.8)
RET -
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08181 Rev A Updated: May 6 2011 6:16AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 449
The iRET antenna family is the next iteration of
Powerwaves innovative antenna product line, which
integrates remote electrical tilt functionality under the
antenna radome, delivering maximized functionality
and improved aesthetics, while eliminating installation
and reliability issues that can occur with typical exterior
RET modules.
iRET Antennas
Power wave

POWERWAVE

Page
Low Broadband Cross Polarized iRET Antennas, 698-894MHz 452
Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz 456
Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 463
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 483
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz 489
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz 493
Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 496
iRET Antennas
iRET Antennas
451

POWERWAVE

iRET Antennas
Cross Polarized
Low Broadband Cross Polarized iRET Antennas, 698-894 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 14.7/12.6 0-13 1.3m(51) P65-15-XL-R 453
65 15.5/13.4 2-10 1.8m(72) P65-16-XL-R 454
65 17.0/14.9 0-6 2.4m(96) P65-17-XL-R 455
iRET Antennas
Low Broadband Cross Polarized iRET Antennas, 698-894 MHz
452

POWERWAVE Very Low Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-15-XL-R Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.9/12.8
TILT: 0-13
LENGTH: 51 (1295mm)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 14.0/11.9 14.9/12.8
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 69 63
Vertical beam width, -3 dB () 17.5 15.5
Electrical down tilt () 0 - 13 0 - 13
Side lobe suppression, vertical 1st upper (dB) > 18 > 18
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 24 > 24
Front to back ratio (dB) 180 30 total power > 19 > 18
Cross polar discrimination (XPD) 0 (dB) > 18 > 18
Cross polar discrimination (XPD) 60 (dB) > 10 > 8
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 500 500
Power handling, average total (W) 1000 1000

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female,2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1295 x 305 x 152 (51 x 12 x 6)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 15.3 (34)
Weight, without brackets, kg (lbs) 11 (25)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
920
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1475 x 400 x 255 (58 x 16 x 10)
Shipping weight, kg (lbs) 18.7 (41)
RET iRET AISGv1.1, MET and AISGv2.0 Available
Brackets 7253.00 Available as option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 30 2011 4:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 453

POWERWAVE Very Low Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-16-XL-R Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 1-12
LENGTH: 72 (1829mm)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 15.2/13.1 16.0/13.9
Polarization Dual Linear +/- 45
Nominal Impedance () 50
VSWR < 1.5:1
Horizontal beam width, -3 dB () 69 62
Vertical beam width, -3 dB () 14 12
Electrical down tilt () 1-12
Side lobe suppression, vertical 1st upper (dB) > 18 > 18
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 26 > 25
Front to back ratio (dB) 180 30 total power > 21 > 20
Cross polar discrimination (XPD) 0 (dB) > 18 > 16
Cross polar discrimination (XPD) 60 (dB) > 10 > 9
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 500
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female, 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1829 x 305 x 152 (72 x 12 x 6)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 18.3 (40)
Weight, without brackets, kg (lbs) 14 (31)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1380
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40 to +60 C
Radome Material PVC IP55
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2082 x 400 x 255 (87 x 16 x 10)
Shipping weight, kg (lbs) 22.9 (50)
RET iRET AISGv1.1, MET and AISGv2.0
Brackets 7253.00 Available as option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 30 2011 12:42PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 454

POWERWAVE Very Low Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-17-XL-R Very Low Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 0-7
LENGTH: 96 (2438mm)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894
Frequency band (MHz) 698-806 806-894
Gain (dBi/dBd) 16.6/14.5 17.5/15.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 67 62
Vertical beam width, -3 dB () 9.0 8.0
Electrical down tilt () 0 - 7 0 - 7
Side lobe suppression, vertical 1st upper (dB) > 18 > 18
Isolation between inputs (dB) > 30 > 30
Tracking, horizontal plane 60 (dB) < 2.0 < 2.0
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 24 > 22
Front to back ratio (dB) 180 30 total power > 19 > 18
Cross polar discrimination (XPD) 0 (dB) > 18 > 18
Cross polar discrimination (XPD) 60 (dB) > 9.0 > 6.9
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 500 500
Power handling, average total (W) 1000 1000

MECHANICAL SPECIFICATIONS*
Connector 2 X 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2438 x 305 x 152 (96 x 12 x 6)
Mounting Pre-mounted tilt brackets
Weight, with brackets, kg (lbs) 24.1 (54)
Weight, without brackets, kg (lbs) 20 (44)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1840
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725 x 400 x 255 (107 x 16 x 10)
Shipping weight, kg (lbs) 29.7(65)
RET iRET AISGv1.1, MET and AISGv2.0
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 30 2011 4:44AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 455

POWERWAVE

iRET Antennas
Cross Polarized
Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65, 65 14.7/12.6, 17.0/14.9 0-13/0-9 1.3m (51) P65-15-XLH-RR 457
65, 65 15.5/13.4 17.5/15.4 2-10/0-10 1.8m (72) P65-16-XLH-RR 458
65, 65 17.2/15.1 17.5/15.4 0-6/0-10 2.4m (96) P65-17-XLH-RR 459
85, 85 13.7/11.6 15.7/13.6 0-13/0-8 1.2m (48) P90-14-XLH-RR 460
90, 90 14.5/12.4 16.3/14.2 0-11/0-8 1.8m (72) P90-15-XLH-RR 461
90, 90 16.1/14.0 16.3/14.2 0-6/0-8 2.4m (96) P90-16-XLH-RR 462
















iRET Antennas
Dual Broadband Cross Polarized iRET 698-894/1710-2170MHz
456

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P65-15-XLH-RR Dual Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 14.7/12.6, 17.0/14.9
TILT: 0-13, 0-9
LENGTH: 51
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14/11.9 14.7/12.6 16.4/14.3 16.7/14.6 17.0/14,9
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 73 63 65 61 60
Vertical beam width, -3 dB () 17 7.5
Electrical down tilt () 0-13 0-9
Side lobe suppression, vertical 1st upper (dB) > 14 >20
Isolation between inputs (dB) >30 > 30
Inter band Isolation (dB) > 40 > 40
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () <1.25 < 0.5
Front to back ratio (dB) 180 30 copolar > 25 > 28
Front to back ratio (dB) 180 30 total power > 25 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 500 300
Power handling, average total (W) 1000 600

MECHANICAL SPECIFICATIONS*
Connector 4 X 7/16 DIN Female, IP67
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1290 x 312.5 x 147.5 (51x12x6)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 19 (41)
Weight, without brackets, kg (lbs) 14 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
404 / 75 / 511
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC, IP55
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1524 x 400 x 255 (60 x 16 x 10)
Shipping weight, kg (lbs) 24 (52)
RET iRET AISGv1.1, MET and AISGv2.0
Brackets 7253.00 Available as option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 23 2011 5:25PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 457

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
P65-16-XLH-RR Dual Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 15.5/13.4 17.5/15.4
TILT: 1-12, 0-8
LENGTH: 72
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 14.8/12.7 15.5/13.4 16.9/14.8 17.2/15.1 17.5/15.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 66 65 60 63 63
Vertical beam width, -3 dB () 14.7 12.5 6.8 6.4 5.7
Electrical down tilt () 1 to 12 0 to 8
Side lobe suppression, vertical 1st upper (dB) > 16 >16 > 16
>16 >16
Isolation between inputs (dB) > 30 > 30 > 30 > 30
Inter band Isolation (dB) > 40 > 40
Tracking, horizontal plane 60 (dB) < 2 < 2 < 2 < 2
First null fill (dB) >-20 >-20 >-20
Vertical beam squint () < 0.8 < 0.8 < 0.5 < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar >24 >24 > 30 >30 >28
Front to back ratio (dB) 180 30 total power
Cross polar discrimination (XPD) 0 (dB) > 15 > 15 > 15 > 15 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10 > 10 > 10 > 10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc)
Power handling, average per input (W) 500 250
Power handling, average total (W) 1000 500

MECHANICAL SPECIFICATIONS*
Connector 4 X 7/16 DIN Female, IP67
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1829x312.5x147.5 (72x12x6)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 29 (64)
Weight, without brackets, kg (lbs) 24 (53)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
708 / 108 / 896
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 150 (67)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC, IP55
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2225 x 400 x 225 (87 x 16 x 10)
Shipping weight, kg (lbs) 34 (75)
RET iRET AISGv1.1, MET and AISGv2.0
Brackets 7253.00 Available as Option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Aug 23 2011 5:33PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 458

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
P65-17-XLH-RR Dual Broadband Antennas
POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 17.2/15.1 17.5/15.4
TILT: 0-7, 0-8
LENGTH: 96
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.4/14.3 17.2/15.1 16.9/14.8 17.2/15.1 17.5/15.4
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 70 63 60 63 60
Vertical beam width, -3 dB () 8.4 6.5
Electrical down tilt () 0 to 7 0 to 8
Side lobe suppression, vertical 1st upper (dB) > 16 > 16
Isolation between inputs (dB) > 30 > 30
Inter band Isolation (dB) > 40
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar > 25 > 30
Front to back ratio (dB) 180 30 total power > 22 > 25
Cross polar discrimination (XPD) 0 (dB) > 15 > 15
Cross polar discrimination (XPD) 60 (dB) 10 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 500 300
Power handling, average total (W) 1000 600

MECHANICAL SPECIFICATIONS*
Connector 4 X 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2439x312.5x147.5(96x12x6 )
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 32 (70)
Weight, without brackets, kg (lbs) 27 (59)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
1006 / 147 / 1273
Maximum operational wind speed, m/s (mph) 45 (100 )
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40 to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725 x 400 x 255(107 x 16 x 10)
Shipping weight, kg (lbs) 37 (81)
RET iRET AISGv1.1, MET and AISGv2.0 Available
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 26 2011 1:34PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
Dual Broadband Antennas
459

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P90-14-XLH-RR Dual Broadband Antennas
POLARIZATION: Dual Linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 85,85
GAIN (dBi dBd): 13.7/11.6 15.7/13.6
TILT: 0-13, 0-9
LENGTH: 52
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 13.0/10.9 13.7/11.6 15.1/13.0 15.4/13.3 15.7/13.6
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 86 83 85 84 85
Vertical beam width, -3 dB () 15.0 7.0
Electrical down tilt () 0-13 0-9
Side lobe suppression, vertical 1st upper (dB) > 12 > 16
Isolation between inputs (dB) > 30 > 30
Inter band Isolation (dB) > 40
Tracking, horizontal plane 60 (dB) < 2 < 2
Vertical beam squint () < 1.25 < 0.5
Front to back ratio (dB) 180 30 copolar > 25 > 25
Front to back ratio (dB) 180 30 total power > 22 > 22
Cross polar discrimination (XPD) 0 (dB) > 10 > 15
Cross polar discrimination (XPD) 60 (dB) > 10 > 10
IM3, 2xTx&43dBm (dBc) <-153 <-153
Power handling, average per input (W) 500 300
Power handling, average total (W) 1000 600

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female, IP67
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1315 x 280 x 186 (52 x 11 x 7)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 19 (41)
Weight, without brackets, kg (lbs) 14 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
388 / 195 / 466
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC, IP55
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1500 x 400 x 255 (59 x 16 x 10 )
Shipping weight, kg (lbs) 24 (52)
RET iRET AISGv1.1, MET and AISGv2.0 Available
Brackets 7253.00 Available as option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Oct 25 2011 7:10PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 460

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P90-15-XLH-RR Dual Broadband Antennas
POLARIZATION:Dual Linear 45
FREQUENCY (MHz):698-894, 1710-2170
HORIZONTAL BEAM WIDTH ():90, 90
GAIN (dBi dBd):14.5/12.4 16.3/14.2
TILT:0-11, 0-8
LENGTH:72
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 13.8/11.7 14.5/12.4 15.7/13.6 16.0/13.9 16.3/14.2
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 86 84 88 80 80
Vertical beam width, -3 dB () 14 12 7 6.5 6
Electrical down tilt () 0 to 11 0 to 8
Side lobe suppression, vertical 1st upper (dB) > 16 >16 >18 >17 >15
Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30
Inter band Isolation (dB) > 40 > 40
Tracking, horizontal plane 60(dB) < 2 < 2 < 2 < 2 < 2
First null fill (dB)
Vertical beam squint () < 0.8 < 0.8 < 0.5 < 0.5 < 0.5
Front to back ratio (dB) 18030copolar 25 25 > 23 > 27 > 30
Front to back ratio (dB) 18030total power 22 22 > 22 > 22 > 22
Cross polar discrimination (XPD) 0(dB) > 15 > 15 > 15 > 15 > 15
Cross polar discrimination (XPD) 60(dB) 10 10 10 10 10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc)
Power handling, average per input (W) 500 300
Power handling, average total (W) 1000 600

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female, IP67, 4 x AISG [2 x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1810 x 280 x 186 (72 x 11 x 7)
Mounting Pole Mounting Bracket
Weight, with brackets, kg (lbs) 22.3 (49)
Weight, without brackets, kg (lbs) 18.6 (41)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
575 / 281 / 690
Maximum operational wind speed, m/s (mph) 45 (100)
Survival wind speed, m/s (mph) 67 (150)
Lightning protection DC Ground
Operating Temperature -40C to +60C
Radome Material PVC, IP55
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2000 x 421 x 366 (78 x 17 x 14)
Shipping weight, kg (lbs) 28.2 (64)
RET iRET AISGv1.1, MET and AISGv2.0 Available
Brackets 7253.00 Available as Option
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 10 2011 6:12PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 461

POWERWAVE Dual Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P90-16-XLH-RR Dual Broadband Antennas
POLARIZATION: Dual Linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 90, 90
GAIN (dBi dBd): 16.1/14.0 16.3/14.2
TILT: 0-7, 0-8
LENGTH: 96
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 698-894 1710-2170
Frequency band (MHz) 698-806 806-894 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 15.4/13.3 16.1/14.0 15.7/13.6 16.0/13.9 16.3/14.2
Polarization Dual Linear +/- 45 Dual Linear +/- 45
Nominal Impedance () 50 50
VSWR < 1.5:1 < 1.5:1
Horizontal beam width, -3 dB () 83 84 87 84 83
Vertical beam width, -3 dB () 9 8.7 6 6.6 6
Electrical down tilt () 0-7 0-8
Side lobe suppression, vertical 1st upper (dB) > 16 >16 >16 >16 >16
Isolation between inputs (dB) > 30 > 30 > 30 > 30 > 30
Inter band Isolation (dB) > 40 > 40
Tracking, horizontal plane 60 (dB) < 2 < 2 < 2 < 2 < 2
First null fill (dB)
Vertical beam squint () < 0.8 < 0.8 < 0.5 < 0.5 < 0.5
Front to back ratio (dB) 180 30 copolar 25 25 >21 >24 >27
Front to back ratio (dB) 180 30 total power 22 22 > 22 > 22 > 22
Cross polar discrimination (XPD) 0 (dB) > 15 > 15 > 15 > 15 > 15
Cross polar discrimination (XPD) 60 (dB) 10 10 10 10 10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc)
Power handling, average per input (W) 500 300
Power handling, average total (W) 1000 600

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female, Extended Shank
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2448 x 280 x 186 (96x11x7)
Mounting Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs) 32 (70)
Weight, without brackets, kg (lbs) 27 (59)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
822 / 384 / 988
Maximum operational wind speed, m/s (mph) 100 (45)
Survival wind speed, m/s (mph) 150 (67)
Lightning protection DC Ground
Operating Temperature -40 to +70C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2725 X 400 X 255 (107 X 16 X 10)
Shipping weight, kg (lbs) (37) 81
RET iRET AISGv1.1, MET and AISGv2.0 Available
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Jun 7 2011 12:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 462

POWERWAVE

iRET Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65
14.7/12.6, 14.6/12.5,
14.6/12.5
0-20/0-12/0-12 1.3m(43) 8780.0ST.0000.00 464
65
14.7/12.6, 14.6/12.5,
14.6/12.5
0-20/0-12/0-12 1.4m(47) 8780.0ST.B100.00 465
65
14.7/12.6, 14.6/12.5,
14.6/12.5
0-20/0-12/0-12 1.4m(47) 8780.0ST.B100.04 466
65
14.7/12.6, 14.6/12.5,
14.6/12.5
0-20/0-12/0-12 1.4m(47) 8780.0ST.B400.00 467
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 1.4m(47) 8780.0ST.B400.02 468
65
14.7/12.6, 14.6/12.5,
14.6/12.5
0-20/0-12/0-12 1.4m(47) 8780.0ST.B400.04 469
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.0000.00 470
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B100.00 471
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B100.02 472
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B100.04 473
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B400.00 474
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B400.02 475
65
16.2/14.1, 16.5/14.4,
16.5/14.4
0-20/0-12/0-12 2.0m(66) 8782.0ST.B400.04 476
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.0000.00 477
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.B100.00 478
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.B100.04 479
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.B400.00 480
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.B400.02 481
65
17.4/15.3, 17.2/15.1,
17.5/15.4
0-10/0-10/0-10 2.6m(86) 8785.0ST.B400.04 482


iRET Antennas
Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
463

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.0000.00 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 17.5 (38.6)
Weight, without brackets, kg (lbs) 12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 21.5 (47.4)
RET No iRET module attached
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Dec 20 2009 Updated: Mar 23 2011 9:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 464

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.B100.00 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19 (42)
Weight, without brackets, kg (lbs) 13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 23 (50.7)
RET AISG1.1 (AISG2.0/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.01 / Dec 20 2009 Updated: Mar 23 2011 9:49AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 465

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.B100.04 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.9)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 22.5 (49.6)
RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Jun 6 2011 12:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 466

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.B400.00 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19 (42)
Weight, without brackets, kg (lbs) 13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 23 (50.7)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 9:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 467

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.B400.02 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 2x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18 (39.6)
Weight, without brackets, kg (lbs) 12.5 (27.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 22 (48.5)
RET AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 9:51AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 468

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8780.0ST.B400.04 i-RET ANTENNA TBB65 1.4m ALXT-
824-960/1710-2170-65-14.7i/15i/15i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 14.1/12 14.7/12.6 14.4/12.3 14.6/12.5 14.8/12.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 64 64
Vertical beam width, -3 dB () 14.9 13.9 13.3 12.6 12
Electrical down tilt () 0 - 20 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@ >17,16,15,14@
2,4,8,12 2,4,8,12 0,4,8,12 0,4,8,12 0,4,8,12
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >38 >38
Tracking, horizontal plane 60 (dB) <1 <2 <1.5 <1.2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.7 0.7 0.7 1 1
Front to back ratio (dB) 180 30 copolar >27 >28 >28 >28 >28
Front to back ratio (dB) 180 30 total power >24 >24 >24 >24 >24
Cross polar discrimination (XPD) 0 (dB) 15 14 16 18 18
Cross polar discrimination (XPD) 60 (dB) > 9.3 >7.7 >6 >5.5 > 5.5
Far field coupling < 0.35 < 0.50 < 0.55 < 0.74 < 0.74
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x155mm (47x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.9)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1550x355x200 (51x12x7)
Shipping weight, kg (lbs) 22.5 (49.6)
RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 9:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 469

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.0000.00 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0-12 0-12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 21.9 (48.2)
Weight, without brackets, kg (lbs) 16.4 (36.1)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 26.5 (58.4)
RET No iRET module attached
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 470

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B100.00 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0-12 0-12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 23.4 (48)
Weight, without brackets, kg (lbs) 17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 28 (61.7)
RET AISG1.1 (AISG2.0/Ericsson)
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 471

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B100.02 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 2x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.4 (49.3)
Weight, without brackets, kg (lbs) 16.9 (37.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27 (59.5)
RET AISG1.1 (AISG2.0/Ericsson) on WHITE system
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 472

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B100.04 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.9 (50.4)
Weight, without brackets, kg (lbs) 17.4 (38.3)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 473

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B400.00 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 23.4 (48)
Weight, without brackets, kg (lbs) 17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 28 (61.7)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 474

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B400.02 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 2x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.4 (49.3)
Weight, without brackets, kg (lbs) 16.9 (37.2)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27 (59.5)
RET AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 475

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8782.0ST.B400.04 i-RET ANTENNA TBB65 2.0m ALXT-
824-960/1710-2170-65-16.2i/16.5i/16.5i-
Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.8/13.7 16.2/14.1 16.0/13.9 16.1/14 16.5/14.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 71 67 65 65 63
Vertical beam width, -3 dB () 9.6 8.6 10 9.4 8.7
Electrical down tilt () 0 - 12 0 - 12
Side lobe suppression, vertical 1st upper (dB) >18,17,16,16@ >18,17,16,16@ >17,15,13@ >17,15,14@ >17,16,15@
2,5,7,8 2,5,7,8 0,6,10 0,6,10 0,6,10
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) >34 >34
Tracking, horizontal plane 60 (dB) <1.0 <1 <1.5 <2 <4
First null fill (dB) 25 25 25 25 25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >30 >27 >28 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >27 >27
Cross polar discrimination (XPD) 0 (dB) 16 15 16 16 15
Cross polar discrimination (XPD) 60 (dB) >11 >9.2 >6.7 >6.3 >6.3
Far field coupling <0.27 <0.47 <0.52 <0.66 <0.66
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x155mm (68x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 22.9 (50.4)
Weight, without brackets, kg (lbs) 17.4 (38.3)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27.5 (60.6)
RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system
Brackets 7256.00,7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 476

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.0000.00 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0-10 0-10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 26.2(57.7)
Weight, without brackets, kg (lbs) 20.7(45.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 31.5(69.4)
RET No iRET module attached
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:00AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 477

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.B100.00 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0-10 0-10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.7(61)
Weight, without brackets, kg (lbs) 22.2(49)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 33(72.7)
RET AISG1.1 (AISG2.0/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 9:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 478

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.B100.04 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.2(59.9)
Weight, without brackets, kg (lbs) 21.7(47.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 32.5(71.7)
RET AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:02AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 479

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.B400.00 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 6x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.7(61)
Weight, without brackets, kg (lbs) 22.2(49)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 33(72.7)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 9:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 480

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.B400.02 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 2x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 26.7(58.8)
Weight, without brackets, kg (lbs) 21.2(46.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 32(70.5)
RET AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:01AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 481

POWERWAVE Triple Broadband Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8785.0ST.B400.04 i-RET ANTENNA TBB65 2.6m ALXT-
824-960/1710-2170-65-17.3i/18i/18i-Ai-
D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 2x1710-2170
Frequency band (MHz) 824-894 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.4/15.3 17.4/15.3 17.2/15.1 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65 62
Vertical beam width, -3 dB () 7 7 7 7 6
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >17 >17 >17 >17 >17
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 38
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <1.5 <1.5 <1.5
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >28 >28 >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27 >27 >25
Cross polar discrimination (XPD) 0 (dB) 16 15 16 15 17
Cross polar discrimination (XPD) 60 (dB) >12 >9.5 >7.0 >7.5 >7.7
Far field coupling <0.24 <0.44 <0.47 <0.52 <0.52
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 6x 7/16 DIN Female 4x AISG
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x155mm(88x11x6)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 27.2(59.9)
Weight, without brackets, kg (lbs) 21.7(47.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 55(123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2800x355x255(92x12x10)
Shipping weight, kg (lbs) 32.5(71.7)
RET AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 23 2011 10:02AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 482

POWERWAVE

iRET Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 15.6/13.5 0-16 0.7m(23) 8720.0ST.B400.00 484
65 18.3/16.2 0-10 1.3m(43) 8721.0ST.B400.00 485
65 19.5/17.4 0-6 2.0m(66) 8722.0ST.B400.00 486
65 18.3/16.2 0-10 1.3m(43) 8721.0ST.0000.00 487
65 19.5/17.4 0-6 2.0m(66) 8722.0ST.0000.00 488
iRET Antennas
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
483

POWERWAVE High Broadband Antennass


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8720.0ST.B400.00 i-RET ANTENNA HBB65 0.7m UXM-
1710-2170-65-15i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.6/13.5
TILT: 0-16
LENGTH: 0.7m(23)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15/12.9 15.1/13 15.6/13.5
Polarization Dual Linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 14.1 13.5 12.5
Electrical down tilt () 0-16
Side lobe suppression, vertical 1st upper (dB) >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16 >17,16,16,15,15@0,4,8,12,16
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.5 <1.5 <1.5
First null fill (dB) >-29, typical >-25 >-29, typical >-25 >-29, typical >-25
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) >15 >15 >15
Cross polar discrimination (XPD) 60 (dB) >15 >15 >13
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 709x167x89.5 (23x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 8.2 (18)
Weight, without brackets, kg (lbs) 4.5 (9.9)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
133 / 31 / 155
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 880x200x200 (211x8x8)
Shipping weight, kg (lbs) 11.5 (25.3)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7456.00A,7454.00A,7455.00,7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 4:45AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 484

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8721.0ST.B400.00 i-RET ANTENNA HBB65 1.3m UXM-
1710-2170-65-18i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-10
LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 mm (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 11(24)
Weight, without brackets, kg (lbs) 7.3(16)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
285 / 60 / 333
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1480x200x200mm (410x8x8)
Shipping weight, kg (lbs) 14.7 (32.4)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7456.00A,7454.00A,7455.00,7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.03 / Feb 19 2010 Updated: Jun 6 2011 1:33AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennass
485

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8722.0ST.B400.00 i-RET ANTENNA HBB65 1.9m UXM-
1710-2170-65-19.5i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-6
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.5/17.4
Polarization Dual Linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 65
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0-6
Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20, typical >-16 >-20, typical >-16 >-20, typical >-16
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >19 >19 >21
Cross polar discrimination (XPD) 60 (dB) >20 >17 >12
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934 x 167 x 89.5 (64 x 6 x 3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 14 (31)
Weight, without brackets, kg (lbs) 8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
423 / 90 / 494
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 2105 x 200 x 200 (611 x 8 x 8)
Shipping weight, kg (lbs) 15.5 (34.1)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7456.00A,7454.00A,7455.00,7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 4:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennass
486

POWERWAVE
No iRET module attached [8510.40]

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8721.0ST.0000.00 i-RET ANTENNA HBB65 1.3m UXM-
1710-2170-65-18i-Ai-D
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-10
LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.6/15.5 18.0/15.9 18.3/16.2
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 64
Vertical beam width, -3 dB () 7.0 6.6 6.3
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-24 typical >-17 >-24 typical >-17 >-24 typical >-17
Vertical beam squint () 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >17 >19 >20
Cross polar discrimination (XPD) 60 (dB) >18 >14 >12
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2x7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1309x167x89.5 mm (43x6x3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 10.5(23.1)
Weight, without brackets, kg (lbs) 6.8(15)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
285 / 60 / 333
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 1480x200x200mm (410x8x8)
Shipping weight, kg (lbs) 14.2 (31.3)
RET No iRET module attached [8510.40]
Brackets 7456.00A,7454.00A,7455.00,7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 6 2011 6:46AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennass
487

POWERWAVE
No iRET module attached [8510.40]

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8722.0ST.0000.00 i-RET ANTENNA HBB65 1.9m UXM-
1710-2170-65-19.5i-Ai-D
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-6
LENGTH: 2.0m(66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 19.0/16.9 19.2/17.1 19.5/17.4
Polarization Dual Linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 66 65
Vertical beam width, -3 dB () 4.7 4.4 4.2
Electrical down tilt () 0-6
Side lobe suppression, vertical 1st upper (dB) >18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.0
First null fill (dB) >-20, typical >-16 >-20, typical >-16 >-20, typical >-16
Vertical beam squint () 0.4 0.4 0.4
Front to back ratio (dB) 180 30 copolar >30 >30 >30
Front to back ratio (dB) 180 30 total power >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >19 >19 >21
Cross polar discrimination (XPD) 60 (dB) >20 >17 >12
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160
Power handling, average per input (W) 250
Power handling, average total (W) 500

MECHANICAL SPECIFICATIONS*
Connector 2x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1934 x 167 x 89.5 (64 x 6 x 3)
Mounting Pre-mounted standard brackets
Weight, with brackets, kg (lbs) 13.5 (29.7)
Weight, without brackets, kg (lbs) 8 (17.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
423 / 90 / 494
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Gray
Packing size, HxWxD, mm (ft) 2105 x 200 x 200 (611 x 8 x 8)
Shipping weight, kg (lbs) 15 (33)
RET No iRET module attached
Brackets 7456.00A,7454.00A,7455.00,7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 6 2011 6:47AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennass
488

POWERWAVE

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 18.1/16.0 0-10 1.3m(43) 8760.0ST.B100.00 490
65 18.1/16.0 0-10 1.3m(43) 8760.0ST.B400.00 491
65 18.1/16.0 0-10 1.3m(43) 8760.0ST.0000.00 492
iRET Antennas
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
489

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8760.0ST.B100.00 i-RET ANTENNA DHBB65 1.3m UXCM-
1710-2170-65-18i/18i-Ai-D AISGv1.1
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10
LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () <2.0 <2.0 <2.0
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >16 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
529 / 63 / 615
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 23.5 (51.8)
RET AISG1.1 (AISG2.0/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 5:05AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
490

POWERWAVE
Daisy chain cable included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

8760.0ST.B400.00 i-RET ANTENNA DHBB65 1.3m UXCM-
1710-2170-65-18i/18i-Ai-D AISGv2.0
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10
LENGTH: 1.3m(43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16.0
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () <2.0 <2.0 <2.0
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >16 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
529 / 63 / 615
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 23.5 (51.8)
RET AISG2.0 (AISG1.1/Ericsson)
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 5:04AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
491

POWERWAVE


*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
8760.0ST.0000.00 i-RET ANTENNA DHBB65 1.3m UXCM-
1710-2170-65-18i/18i-Ai-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 0-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 1710-2170
Frequency band (MHz) 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 17.7/15.6 17.9/15.8 18.1/16
Polarization Dual linear 45
Nominal Impedance () 50
VSWR <1.4:1
Horizontal beam width, -3 dB () 67 65 64
Vertical beam width, -3 dB () 7.1 6.8 6.2
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10
Isolation between inputs (dB) >30 >30 >30
Tracking, horizontal plane 60 (dB) <2.0 <2.0 <2.0
First null fill (dB) >-24,typical>-18 >-24,typical>-18 >-24,typical>-18
Vertical beam squint () <2.0 <2.0 <2.0
Front to back ratio (dB) 180 30 copolar >28 >28 >28
Front to back ratio (dB) 180 30 total power >28 >28 >28
Cross polar discrimination (XPD) 0 (dB) >16 >16 >20
Cross polar discrimination (XPD) 60 (dB) >16 >13 >10
Far field coupling
IM3, 2xTx&43dBm (dBc) <-153 <-153 <-153
IM7, 2xTx&43dBm (dBc) <-160 <-160 <-160
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (44x11x3)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.8)
Weight, without brackets, kg (lbs) 13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
529 / 63 / 615
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (48x13x7)
Shipping weight, kg (lbs) 22.5 (49.6)
RET No iRET module attached [8510.40]
Brackets 7256.00, 7454.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Rev1.1 / Feb 19 2010 Updated: Sep 6 2011 6:48AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
492

POWERWAVE

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 18.0/15.9, 18.0/15.9 0-10/0-10 0.7m(23) P65-18-XHW2-RR 494
65 18.0/15.9, 18.0/15.9 0-10/0-10 1.3m (43) P65-18-XHW2-MM 495
iRET Antennas
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
493

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
P65-18-XHW2-RR i-RET ANTENNA DBB65 1.3m 1710-
2170/2500-2690-65-18i/18i-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2500-2690, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9, 18.0/15.9
TILT: 0-10/0-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2500-2690 1710-2170
Frequency band (MHz) 2500-2690 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 18.0/15.9 17.6/15.5 17.8/15.7 18.0/15.9
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65
Vertical beam width, -3 dB () 5.7 7.0 6.6 6.3
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >20,18,15 @ 0,5,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30 >30
Inter band Isolation (dB) >35 >35
Tracking, horizontal plane 60 (dB) <2 <2 <2 <2
First null fill (dB) >-24 typical >-17 >-20 typical >-17 >-20 typical >-17 >-20 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >27 >30 >30 >30
Front to back ratio (dB) 180 30 total power >26 >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >15 >17 >17 >17
Cross polar discrimination (XPD) 60 (dB) >10 >18 >14 >10
Far field coupling - - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 250 250
Power handling, average total (W) 500 500

MECHANICAL SPECIFICATIONS*
Connector 4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (52x13.5x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (42.9)
Weight, without brackets, kg (lbs) 14.0 (30.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
529/63/615
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (56x16x8)
Shipping weight, kg (lbs) 23.5 (51.8)
RET 2xiRET 8510.40 AISGv2.0/3GPP
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 16 2011 5:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
494

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
P65-18-XHW2-MM i-RET ANTENNA DBB65 1.3m 1710-
2170/2500-2690-65-18i/18i-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2500-2690, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9, 18.0/15.9
TILT: 0-10/0-10
LENGTH: 1.3m (43)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2500-2690 1710-2170
Frequency band (MHz) 2500-2690 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 18.0/15.9 17.6/15.5 17.8/15.7 18.0/15.9
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 65 65 65 65
Vertical beam width, -3 dB () 5.7 7.0 6.6 6.3
Electrical down tilt () 0 - 10 0 - 10
Side lobe suppression, vertical 1st upper (dB) >20,18,15 @ 0,5,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
>20,20,20,20,18,18 @
0,2,4,6,8,10
Isolation between inputs (dB) >30 >30 >30 >30
Inter band Isolation (dB) >35 >35
Tracking, horizontal plane 60 (dB) <2 <2 <2 <2
First null fill (dB) >-24 typical >-17 >-20 typical >-17 >-20 typical >-17 >-20 typical >-17
Vertical beam squint () 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >27 >30 >30 >30
Front to back ratio (dB) 180 30 total power >26 >27 >27 >27
Cross polar discrimination (XPD) 0 (dB) >15 >17 >17 >17
Cross polar discrimination (XPD) 60 (dB) >10 >18 >14 >10
Far field coupling - - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 250 250
Power handling, average total (W) 500 500

MECHANICAL SPECIFICATIONS*
Connector 4x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1320x343x100 (52x13.5x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 18.5 (40.9)
Weight, without brackets, kg (lbs) 13.0 (28.8)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
529/63/615
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (56x16x8)
Shipping weight, kg (lbs) 22.5 (49.8)
RET No iRET modules attached [8510.10]
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Mar 16 2011 5:35AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
495

POWERWAVE

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET 2300-2700MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 18.0/15.9 0-10 1.2m(48) P65-18-XXW2-R 497
65 18.0/15.9 0-10 1.2m(48) P65-18-XXW2-M 498
90 16.1 0-10 1.2m(48) P90-17-XXW2-R 499
90 16.1 0-10 1.2m(48) P90-17-XXW2-M 500


















iRET Antennas
Dual High Broadband Cross Polarized iRET 2300-2700MHz
496

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

P65-18-XXW2-R i-RET ANTENNA DVHBB65 1.2m
WXCM-2300-2690-65-18i/18i-Ai-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2496-2690
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0-10
LENGTH: 1.2m(48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2496-2690
Frequency band (MHz) 2496-2690
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 5.5
Gain (dBi/dBd) 18.0/15.9
Electrical down tilt () 0-10
Nominal Impedance () 50
Return Loss (dB) <-14
Side lobe suppression, vertical 1st upper (dB) <18,16,15 @ 0,5,10
Port Isolation (dB) >30
Front to back ratio @ 180 30 >27
Cross polar discrimination (XPD) 0 (dB) >15
Cross polar discrimination (XPD)60 (dB) >10
IM3, 2xTx&43dBm @ 2 minute duration(dBc) <-110
HBW Squint across the same band ports ( X) +/- 4
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4x7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1209x343x89 (4x11x3)
Mounting Pre-mounted heavy duty brackets [7456.00]
Weight, with brackets, kg (lbs) 17.0 (38.0)
Weight, without brackets, kg (lbs) 12.0 (26.0)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
546/66/636
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 70(156)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material PVC
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (56x16x8)
Shipping weight, kg (lbs) 20.6(45)
Brackets 7256.00, 7454.00A, 7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Jun 28 2011 7:24PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
497

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.
P65-18-XXW2-M i-RET ANTENNA DVHBB65 1.2m
WXCM-2300-2690-65-18i/18i-Ai-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2300-2690**
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0-10
LENGTH: 1.2m(48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2300-2690**
Frequency band (MHz) 2300-2690
Gain (dBi/dBd) 18.0/15.9
Polarization 2 x Dual Linear 45
Nominal Impedance () 50
VSWR <1.5:1
Horizontal beam width, -3 dB () 65
Vertical beam width, -3 dB () 5.5
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) <18,16,15 @ 0,5,10
First null fill (dB) >-24, typical >-18
Vertical beam squint () 0.5
Front to back ratio (dB) 180 30 coplanar >27
Front to back ratio (dB) 180 30 total power >25
Cross polar discrimination (XPD) 0 (dB) >15
Cross polar discrimination (XPD)60 (dB) >10
Far field coupling n.a.
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4x7/16 DIN Female [No i-RET module attached]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1209x343x89 (4x11x3)
Mounting Pre-mounted heavy duty brackets [7456.00]
Weight, with brackets, kg (lbs) 17.0 (38.0)
Weight, without brackets, kg (lbs) 12.0 (26.0)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
476 / 58 / 538
Maximum operational wind speed, m/s (mph) 42(93)
Survival wind speed, m/s (mph) 70(156)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430x400x200 (56x16x8)
Shipping weight, kg (lbs) 20.6(45)
Brackets 7256.00, 7454.00A, 7458.00A
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Jun 29 2011 12:11AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
498

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

P90-17-XXW2-R Dual High Broadband Cross Polarized
POLARIZATION: XXPol
FREQUENCY (MHz): 2300-2690
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1 (Average)
TILT: 0-10
LENGTH: 1.2M (48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2300-2690
Frequency band (MHz) 2300-2690
Gain (dBi/dBd) 16.1 (Average)
Polarization 2 x Dual linear 45
Nominal Impedance () 50
VSWR <1.5:1
Horizontal beam width, -3 dB () 90 +/- 6
Vertical beam width, -3 dB () 5.5
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) 12 @ 0, 17 @ 5, 15 @ 10
First null fill (dB) >-24,typical>-18
Vertical beam squint () <1.0 +/- .5
Front to back ratio (dB) 180 30 coplanar >30 @ 180
Front to back ratio (dB) 180 30 total power >25 @ +/-30 cone
Cross polar discrimination (XPD) 0 (dB) >15
Cross polar discrimination (XPD)60 (dB) >10
Far field coupling N/A
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female, 2 x AISG [1x8510.40]
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1219 x 343 x 100 (48 x 13.5 x 3.9)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (44)
Weight, without brackets, kg (lbs) 14.2 (32)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -30 to +70C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430 x 400 x 200 (48 x 13 x 8)
Shipping weight, kg (lbs) 20 (45)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 22 2011 7:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
499

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

P90-17-XXW2-M Dual High Broadband Cross Polarized
POLARIZATION: XXPol
FREQUENCY (MHz): 2496-2690
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1 (Average)
TILT: 0-10
LENGTH: 1.2M (48)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 2496-2690
Frequency band (MHz) 2496-2690
Gain (dBi/dBd) 16.1 (Average)
Polarization 2 x Dual linear 45
Nominal Impedance () 50
VSWR <1.5:1
Horizontal beam width, -3 dB () 90 +/- 6
Vertical beam width, -3 dB () 5.5
Electrical down tilt () 0-10
Side lobe suppression, vertical 1st upper (dB) 12 @ 0, 17 @ 5, 15 @ 10
First null fill (dB) >-24,typical>-18
Vertical beam squint () <1.0 +/- .5
Front to back ratio (dB) 180 30 coplanar >30 @ 180
Front to back ratio (dB) 180 30 total power >25 @ +/-30 cone
Cross polar discrimination (XPD) 0 (dB) >15
Cross polar discrimination (XPD)60 (dB) >10
Far field coupling N/A
IM3, 2xTx&43dBm (dBc) <-153
Power handling, average per input (W) 250
Power handling, average total (W) 1000

MECHANICAL SPECIFICATIONS*
Connector 4 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1219 x 343 x 100 (48 x 13.5 x 3.9)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 19.5 (44)
Weight, without brackets, kg (lbs) 14.2 (32)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC Grounded
Operating Temperature -30 to +70C
Radome Material ASA
Radome colour Light Grey
Packing size, HxWxD, mm (ft) 1430 x 400 x 200 (48 x 13 x 8)
Shipping weight, kg (lbs) 20 (45)
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Sep 22 2011 7:25AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
High Broadband Antennas
500
iDiplexer antennas combine the performance of
Powerwaves high performing multiband antenna line
and external diplexer into one product. iDiplexed
antennas offer a reduced amount of connectors and
feeder lines to customers who are limited in adding
additional feeders due to windload and space limitation
on towers. Customers can rapidly deploy an additional
overlay network by just exchanging the existing antennas
with iDiplexed antennas and reusing the existing feeders.
iDiplexed antennas usually combine the low band and
high band frequencies into a single pair of connectors,
still keeping the independent variable downtilt capability.
iDiplexer Antennas
Power wave

POWERWAVE

iDiplexer Antennas
Cross Polarized
Multi Broadband Cross Polarized Antennas
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
65 17.3/15.2, 17.8/15.7
MET (with Integrated
Diplexer)
2.6m (86) 7755.0ST.0002.00 503
65 16.7/14.6, 17.4/15.3
MET (with Integrated
Diplexer)
2.0m (66) 7752.0ST.0002.00 504
65 15/12.9, 18/15.9
MET (with Integrated
Diplexer)
1.4m (47) 7750.0ST.0002.00 505
iDiplexer Antennas
iDiplexer Antennas
502

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7755.0ST.0002.00 Dual Broadband Cross Polarized With
Integrated Diplexer
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: MET (with Integrated Diplexer)
LENGTH: 2.6m (86)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1900-2170
Gain (dBi/dBd) 16.6/14.5 17.3/15.2 17.3/15.2 17.6/15.5 17.8/15.7
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1:5:1
Horizontal beam width, -3 dB () 71 67 65 65 62
Vertical beam width, -3 dB () 7.4 7.0 6.9 6.4 6.1
Electrical down tilt () 2 to 8 0 to 8
Side lobe suppression, vertical 1st upper (dB) >18,18,17,16,16@ >18,18,17,16,16@ >17,16,15,14,13@ >17,17,16,15,14@ >17,17,16,15,14@
2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8 2,4,6,8
Isolation between inputs (dB) 30 30 30 30 30
Inter band Isolation (dB) 38 -
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.5 <1 <3.5
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () 0.5 0.5 0.5 0.5 0.5
Front to back ratio (dB) 180 30 copolar >30 >30 >30 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) 16 14 16 16 16
Cross polar discrimination (XPD) 60 (dB) >11 > 9.5 > 6.3 >7.2 >7.5
Far field coupling <0.3 <0.41 <0.53 <0.58 <0.58
IM3, 2xTx&43dBm (dBc) <-150 <-150
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2658x280x125mm (88x11x4)
Mounting Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs) 25.1 (55)
Weight, without brackets, kg (lbs) 19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 55 (123)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour 2800x355x255 (92x12x10)
Packing size, HxWxD, mm (ft) Light Grey
Shipping weight, kg (lbs) 32.5 (71.6)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 2 2010 5:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
iDiplexer Antennas
503

POWERWAVE

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7752.0ST.0002.00 Dual Broadband Cross Polarized With
Integrated Diplexer
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 17.4/15.3
TILT: MET (with Integrated Diplexer)
LENGTH: 2.0m (66)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-896 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15.7/14.0 16.6/14.5 17.0/14.9 17.2/15.1 17.5/15.4
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 71 67 63 63 60
Vertical beam width, -3 dB () 9.6 8.9 7 7 6.2
Electrical down tilt () 2-9 0-8
Side lobe suppression, vertical 1st upper (dB) >17,16,15,14 @ >17,16,15,14 @ >18,17,15,14 @ >18,17,15,14 @ 0,2,4,8>18,17,15,14 @ 0,2,4,8
2,4,6,8 2,4,6,8 0,2,4,8 0,2,4,8 0,2,4,8
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) - -
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.5 <1.5 <1.5
First null fill (dB) >-25 >-25 >-25 >-25 >-25
Vertical beam squint () <1 <1 <1 <1 <1
Front to back ratio (dB) 180 30 copolar >30 >30 >30 >30 >30
Front to back ratio (dB) 180 30 total power >25 >25 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) >16 >15 >16 >16 >16
Cross polar discrimination (XPD) 60 (dB) > 12 > 9.5 > 6.2 >6.5 > 7.5
Far field coupling <0.26 <0.39 <0.5 <0.59 <0.59
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) - <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 2033x280x125mm (68x11x4)
Mounting Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs) 19.8 (44)
Weight, without brackets, kg (lbs) 16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 70 (156)
Lightning protection DC grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Grey (RAL 7035 on all visible plastic parts)
Packing size, HxWxD, mm (ft) 2175x355x255 (72x14x10)
Shipping weight, kg (lbs) 27 (59.5)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7256.00, 7454.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Dec 2 2010 5:53AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.
iDiplexer Antennas
504

POWERWAVE iDiplexer Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7750.0ST.0002.00 Dual Broadband Cross Polarized With
Integrated Diplexer
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9, 18/15.9
TILT: MET (with Integrated Diplexer)
LENGTH: 1.4M
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-960 1710-2170
Frequency band (MHz) 824-880 880-960 1710-1880 1850-1990 1920-2170
Gain (dBi/dBd) 15/12.9 15/12.9 17.3/15.2 17.3/15.2 18/15.9
Polarization Dual linear 45 Dual linear 45
Nominal Impedance () 50 50
VSWR >1.5:1 >1.5:1
Horizontal beam width, -3 dB () 68 3 68 3 67 2 67 2 62 4
Vertical beam width, -3 dB () 14 14 7 7 6.2
Electrical down tilt () 2 - 12 0 - 8
Side lobe suppression, vertical 1st upper (dB) >21,20,17,16 @ >21,20,17,16 @ >18,17,15,14 @ >18,17,15,14 @ >18,17,15,14 @
2,4,8,12 2,4,8,12 0,2,4,8 0,2,4,8 0,2,4,8
Isolation between inputs (dB) >30 >30 >30 >30 >30
Inter band Isolation (dB) 40
Tracking, horizontal plane 60 (dB) <1.0 <1.0 <1.5 <1.5 <1.5
First null fill (dB) >20 >20 >20 >20 >20
Vertical beam squint () <1 <1 <1 <1 <1
Front to back ratio (dB) 180 30 copolar >26 >26 >30 >30 >30
Front to back ratio (dB) 180 30 total power >26 >26 >25 >25 >25
Cross polar discrimination (XPD) 0 (dB) >17 >17 >18 >18 >18
Cross polar discrimination (XPD) 60 (dB) >11 >11 >10 >10 >10
Far field coupling - - - - -
IM3, 2xTx&43dBm (dBc) <-153 <-153
IM7, 2xTx&43dBm (dBc) NA <-160
Power handling, average per input (W) 300 250
Power handling, average total (W) 600 500

MECHANICAL SPECIFICATIONS*
Connector 2 x 7/16 DIN Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 1408x280x125mm (49x11x5)
Mounting Pre Mounted Heavy Duty Brackets
Weight, with brackets, kg (lbs) 18 (39.6)
Weight, without brackets, kg (lbs) 14.3 (31.5)
Wind load, frontal/lateral/rear side 42 m/s
Cd=1.6 (N)
435
Maximum operational wind speed, m/s (mph) 42 (93)
Survival wind speed, m/s (mph) 56 (123)
Lightning protection DC Grounded
Operating Temperature -40C to +60C
Radome Material GRP
Radome colour Grey (RAL 7035 on all visible plastic parts)
Packing size, HxWxD, mm (ft) 1550x355x255mm (61x14x10)
Shipping weight, kg (lbs) 23 (50.6)
RET 8210.40, 8210.10, 8220.40, 8220.10
Brackets 7456.00A, 7454.00, 7455.00, 7458.00
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.



Updated: Oct 21 2011 1:50AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 505
The Powerwave RET system is designed to meet the
high requirements for reliability, fexibility and effciency
in remote control of tower-mounted telecommunication
equipment. The system consists of a master control unit
(MCU) that controls the antenna line devices (ALDs) and
supplies DC power to them via a common bus. ALDs are
connected to the MCU using a separate ALD system cable
or by using the existing RF feeders in your system.
Remote Electrical Tilt (RET)
Power wave

POWERWAVE

RET Page
Single Band RET 508
Dual Band RET 517
Triple Band RET 520

iRET Antenna Controller Module Page
iRET 8510 523

Master Control Units Page
MCU 526

Current Injector Layer One Converter Page
CILOC 533

RET System Cables Page
RET System Cables 538

Remote Electrical Tilt
Remote Electrical Tilt (RET)
507

POWERWAVE

Remote Electrical Tilt

Single Band RET
Standard Power Supply
Start-up
Surge
Current
Consumption(idle) Part Number Page
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8110.40 509
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V <1mC 19V 8210.10 510
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8210.40 511
AISG1.1 (AISG
V2.0/3GPP, Ericsson
configurable)
+10 to +30 V <1mC 19V 8110.10 512
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V <1mC 19V 8212.10 513
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8212.40 514
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V <1mC 19V 8211.10 515
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8211.40 516


Remote Electrical Tilt
Single Band RET
508

POWERWAVE Remote Electrical Tilt







8110.40 Single Band RET
ELECTRICAL SPECIFICATIONS*
Product Number 8110.40
Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm) 62 x 78 x 216
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Rev1.0 / Oct 27 2009 Updated: Sep 21 2011 4:29AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 509

POWERWAVE Remote Electrical Tilt







8210.10 Single Band RET for Multiband Antennas (Controlling white
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8210.10
Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:35PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 510

POWERWAVE Remote Electrical Tilt







8210.40 Single Band RET for Multiband Antennas (Controlling white
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8210.40
Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:35PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 511

POWERWAVE Remote Electrical Tilt







8110.10 Single Band RET
ELECTRICAL SPECIFICATIONS*
Product Number 8110.10
Standard AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm) 62 x 78 x 216
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Rev1.0 / Oct 27 2009 Updated: May 10 2010 11:34PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 512

POWERWAVE Remote Electrical Tilt







8212.10 Single Band RET for Multiband Antennas (Controlling blue
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8212.10
Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 513

POWERWAVE Remote Electrical Tilt







8212.40 Single Band RET for Multiband Antennas (Controlling blue
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8212.40
Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 514

POWERWAVE Remote Electrical Tilt







8211.10 Single Band RET for Multiband Antennas (Controlling red
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8211.10
Standard AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 515

POWERWAVE Remote Electrical Tilt







8211.40 Single Band RET for Multiband Antennas (Controlling red
antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number 8211.40
Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:35PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 516

POWERWAVE

Remote Electrical Tilt

Dual Band RET
Standard Power Supply
Start-up
Surge
Current
Consumption(idle) Part Number Page
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8220.40 518
AISG v1.1 +10 to +30 V <1mC 19V 8220.10 519
Remote Electrical Tilt
Dual Band RET
517

POWERWAVE Remote Electrical Tilt







8220.40 Dual Band RET
ELECTRICAL SPECIFICATIONS*
Product Number 8220.40
Standard AISG V2.0/3GPP (AISG1.1)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: Sep 21 2011 4:30AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 518

POWERWAVE Remote Electrical Tilt







8220.10 DualBand RET
ELECTRICAL SPECIFICATIONS*
Product Number 8220.10
Standard AISG v1.1 (AISG V2.0/3GPP)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin ,19V, <250mA at Vin>19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin>19V
AISG Data Rate 9.6kbps
Rod positioning accuracy <0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500,000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: Aug 19 2010 7:32AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 519

POWERWAVE

Remote Electrical Tilt

Triple Band RET
Standard Power Supply
Start-up
Surge
Current
Consumption(idle) Part Number Page
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8230.40 521
AISG v1.1 +10 to +30 V <1mC 19V 8230.10 522
Remote Electrical Tilt
Triple Band RET
520

POWERWAVE Remote Electrical Tilt







8230.40 Triple Band RET
ELECTRICAL SPECIFICATIONS*
Product Number 8230.40
Standard AISG V2.0/3GPP (AISG1.1)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: Sep 21 2011 4:31AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 521

POWERWAVE Remote Electrical Tilt







8230.10 Triple Band RET
ELECTRICAL SPECIFICATIONS*
Product Number 8230.10
Standard AISG v1.1 (AISG V2.0/3GPP)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy < +/- 0.8mm
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 1 kg
Dimensions (W, L, H)(mm)
125 x 213 x 62 (excluding
mounting screws)
Connector Protection Ground M6 screw
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: Aug 19 2010 7:34AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 522

POWERWAVE

Remote Electrical Tilt

iRET Antenna Controller Module 8510
Standard Power Supply
Start-up
Surge
Current
Consumption(idle) Part Number Page
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8510.10 524
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V <1mC 19V 8510.40 525
Remote Electrical Tilt
iRET Antenna Controller Module
523

POWERWAVE Remote Electrical Tilt







8510.10 iRET ANTENNA CONTROLLER MODULE
ELECTRICAL SPECIFICATIONS*
Product Number 8510.10
Standard AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy NA
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 0.33 kg
Dimensions (W, L, H)(mm)
125 x 65 x 26 (excluding
connectors)
Connector Protection Ground Grounded Via Antenna
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system

Updated: May 30 2010 11:59PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 524

POWERWAVE Remote Electrical Tilt







8510.40 iRET ANTENNA CONTROLLER MODULE
ELECTRICAL SPECIFICATIONS*
Product Number 8510.40
Standard AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power Supply +10 to +30 V
Start up surge <1mC
Current Consumption during tilting <400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle <100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate 9.6 kbps
Rod positioning accuracy NA
Operating Temperature -40 to +65C
Type Approvals Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight 0.33 kg
Dimensions (W, L, H)(mm)
125 x 65 x 26 (excluding
connectors)
Connector Protection Ground Grounded Via Antenna
Connector AISG IEC 60130-9 (Ed 3.0)
Ingress protection IP65
Environmental ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet the high
requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.

This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system

Updated: May 31 2010 9:27AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 525

POWERWAVE

Remote Electrical Tilt

Master Control Units
Type Current Consumption Power Supply Part Number Page
Master Control Unit 115/230 VAC 1.7 / 1.0A AC 7070.10 (AC) 527
Master Control Unit 24V / <5.0A 24V 7070.30 (24 V) 528
Master Control Unit 48V / <2.5A -48V 7070.50 (-48V) 529
Layer One Converter
Master Control Unit
115/230 VAC 1.7 / 1.0A AC 7072.10 (AC) 530
Layer One Converter
Master Control Unit
24V / <5.0A 24V 7072.30 (24 V) 531
Layer One Converter
Master Control Unit
48V / <2.5A -48V 7072.50 (-48V) 532
Remote Electrical Tilt
Master Control Unit
526

POWERWAVE Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7070.10 (AC) Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply AC
AC / Current consumption 115/230 VAC 1.7 / 1.0A
ALD supply voltage +24 V DC
Max current draw per connector 2.7 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 IEC 60130-9 (Ed. 3.0)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08237 Rev A Updated: Nov 8 2011 5:19PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 527

POWERWAVE Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7070.30 (24 V) Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply 24V
DC / Current consumption 24V / <5.0A
ALD supply voltage +24 V DC
Max current draw per connector 2.7 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 IEC 60130-9 (Ed. 3.0)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08237 Rev A Updated: Nov 8 2011 5:20PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 528

POWERWAVE Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7070.50 (-48V) Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply -48V
DC / Current consumption 48V / <2.5A
ALD supply voltage +24 V DC
Max current draw per connector 2.7 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 IEC 60130-9 (Ed. 3.0)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08237 Rev A Updated: Nov 8 2011 5:20PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 529

POWERWAVE Layer One Converter Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7072.10 (AC) Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply AC
AC / Current consumption 115/230 VAC 1.7 / 1.0A
ALD supply voltage +24 V DC
Max current draw per connector 2.7 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 SMA (female)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08238 Rev A Updated: Nov 8 2011 5:20PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 530

POWERWAVE Layer One Converter Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7072.30 (24 V) Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply 24V
DC / Current consumption 24V / <5.0A
ALD supply voltage +24 V DC
Max current draw per connector 1.16 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 SMA (female)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08238 Rev A Updated: Nov 8 2011 5:21PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 531

POWERWAVE Layer One Converter Master Control Unit

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7072.50 (-48V) Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power Supply -48V
DC / Current consumption 48V / <2.5A
ALD supply voltage +24 V DC
Max current draw per connector 1.16 A
Total current draw all connectors 3.48 A
Surge at start up all connectors 54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open 5 1 V
Output current at closed 5 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage 30 V DC
Max input current 0.5 A
AISG data rate 9.6 kbps, 38.4 kbps
Weight < 2.5 kg
Dimensions Width 19 rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply IEC/EB60320-1 Male
RET 1 to 3 SMA (female)
Site LAN 4-pole RJ45 MDI
Local (Ethernet port) 4-pole RJ45 MDI
RS-232 9-pin d-SUB male
Local Alarm Connector panel
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF >250.000 hrs
Operating Temperature -5C to 60C
Environmental ETSI 300 019 * Weather-protected locations*

D031-08238 Rev A Updated: Nov 8 2011 5:21PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 532

POWERWAVE

Remote Electrical Tilt

Current Injector Layer One Converter
Frequency Range (MHz)
Insertion Loss
(dB)
Return Loss
(dB) ANT Port
Return Loss
(dB) BTS Port Part Number Page
806-960 MHz and 1710-2180
MHz
<0.2 dB >20 dB >20 dB 7060.00 (ANT) 534
806-960 MHz and 1710-2180
MHz
<0.2 dB >20 dB >20 dB 7060.10 (BTS) 535
698-960 MHz and 1710-2180
MHz
<0.2 dB >20 dB >20 dB 7060.05 (ANT) 536
698-960 MHz and 1710-2180
MHz
<0.2 dB >20 dB >20 dB 7060.15 (BTS) 537
Remote Electrical Tilt
Current Injector Layer One Converter
533

POWERWAVE Current Injector Layer One Converter



7060.00 (ANT) Current Injector Layer One Converter
ELECTRICAL DATA
Range (MHz) 806-960 MHz and 1710-2180 MHz
Frequency Range 806-960 MHz and 1710-2180 MHz
Insertion Loss (dB) <0.2 dB
Return Loss (dB) ANT Port >20 dB
Return Loss (dB) BTS Port >20 dB
Passive Intermodulation 2X43 dBm <-116 dBm
Power Handling (dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply +9 to +31 V
Current Consumption < 50 mA
Current Handling 1.3A
AISG Data Rate 9.6 kbps, 38.4 kbps
Up-Link (MHz) 1850-1910
Down-Link (MHz) 1930-1990
Power Consumption N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) <48 x 92 x 80
Weight (kg) <750 g
RF Connectors DIN 7/16 female/ male
AISG Output IEC 60130-9 E (Ed 3.0)
Protection Ground M8 screw
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65 N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) -40 to +65 C
MTBF > 500,000 hrs
Ingress Protection IP65
APPROVALS AND TESTS
Environmental ETSI 300 019
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev A Updated: Apr 5 2010 12:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 534

POWERWAVE Current Injector Layer One Converter



7060.10 (BTS) Current Injector Layer One Converter
ELECTRICAL DATA
Range (MHz) 806-960 MHz and 1710-2180 MHz
Frequency Range 806-960 MHz and 1710-2180 MHz
Insertion Loss (dB) <0.2 dB
Return Loss (dB) ANT Port >20 dB
Return Loss (dB) BTS Port >20 dB
Passive Intermodulation 2X43 dBm <-116 dBm
Power Handling (dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply +9 to +31 V
Current Consumption < 50 mA
Current Handling 1.3A
AISG Data Rate 9.6 kbps, 38.4 kbps
Up-Link (MHz) 1850-1910
Down-Link (MHz) 1930-1990
Power Consumption N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) <48 x 92 x 80
Weight (kg) <750 g
RF Connectors DIN 7/16 female/ male
AISG Output IEC 60130-9 E (Ed 3.0)
Protection Ground M8 screw
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65 N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) -40 to +65 C
MTBF > 500,000 hrs
Ingress Protection IP65
APPROVALS AND TESTS
Environmental ETSI 300 019
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev A Updated: Apr 5 2010 12:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 535

POWERWAVE Current Injector Layer One Converter



7060.05 (ANT) Current Injector Layer One Converter
ELECTRICAL DATA
Range (MHz) 698-960 MHz and 1710-2180 MHz
Frequency Range 698-960 MHz and 1710-2180 MHz
Insertion Loss (dB) <0.2 dB
Return Loss (dB) ANT Port >20 dB
Return Loss (dB) BTS Port >20 dB
Passive Intermodulation 2X43 dBm <-116 dBm
Power Handling (dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply +9 to +31 V
Current Consumption < 50 mA
Current Handling 1.3A
AISG Data Rate 9.6 kbps, 38.4 kbps
Up-Link (MHz)
Down-Link (MHz)
Power Consumption N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) <48 x 92 x 80
Weight (kg) <750 g
RF Connectors 7/16 Male/BTS, Female/ANT side
AISG Output IEC 60130-9 E (Ed 3.0)
Protection Ground M8 screw
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65 N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) -40 to +65 C
MTBF > 500,000 hrs
Ingress Protection IP65
APPROVALS AND TESTS
Environmental ETSI 300 019
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev B Updated: Apr 5 2010 12:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 536

POWERWAVE Current Injector Layer One Converter



7060.15 (BTS) Current Injector Layer One Converter
ELECTRICAL DATA
Range (MHz) 698-960 MHz and 1710-2180 MHz
Frequency Range 698-960 MHz and 1710-2180 MHz
Insertion Loss (dB) <0.2 dB
Return Loss (dB) ANT Port >20 dB
Return Loss (dB) BTS Port >20 dB
Passive Intermodulation 2X43 dBm <-116 dBm
Power Handling (dBm) Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply +9 to +31 V
Current Consumption < 50 mA
Current Handling 1.3A
AISG Data Rate 9.6 kbps, 38.4 kbps
Up-Link (MHz)
Down-Link (MHz)
Power Consumption N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) <48 x 92 x 80
Weight (kg) <750 g
RF Connectors 7/16 Female/BTS, Male/ANT side
AISG Output IEC 60130-9 E (Ed 3.0)
Protection Ground M8 screw
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65 N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) -40 to +65 C
MTBF > 500,000 hrs
Ingress Protection IP65
APPROVALS AND TESTS
Environmental ETSI 300 019
Type Approvals Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev B Updated: Apr 5 2010 12:09PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 537

POWERWAVE

Remote Electrical Tilt

RET System Cables
Continuous
Current DC
Ports
Continuous AISG
Output Input
Operation
Temperature
Range Conductor Area
Part
Number Page
3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C
2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)
7085.XX 539
3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C
2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)
7095.XX 540
Remote Electrical Tilt
RET System Cables
538

POWERWAVE Remote Electrical Tilt





7085.XX RET System Cables
SPECIFICATIONS*
Product Number 7085.XX
Continuous Current DC Ports 3.5 A
Connectors AISG Output Input IEC 60130-9 (Ed. 3.0)
Operation Temperature Range -40 to +65
Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP67 mated
Environmental ETSI 300 019
Color Black
7085.05 RET short cable 0.5m
7085.15 RET short cable 1.5m
7085.30 RET short cable 3.0m
7085.50 RET short cable 5.0m



8-Pin
Connector
Pin 1 +12 V +12 V
Pin 2 Not connected Not connected
Pin 3 RS-485B RS-485B
Pin 4 Not connected Not connected
Pin 5 RS-485A RS-485A
Pin 6 +24 V +24 V
Pin 7 DC return DC return
Pin 8 Not connected Not connected

ooPPPP Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 539

POWERWAVE Remote Electrical Tilt





7095.XX RET Systems Cable
SPECIFICATIONS*
Product Number 7095.XX
Continuous Current DC Ports 3.5 A
Connectors AISG Output Input IEC 60130-9 (Ed. 3.0)
Operation Temperature Range -40 to +65C
Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)
Type Approvals Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP67 mated
Environmental ETSI 300 019
Color Black
7095.10 RET long cable 10m
7095.20 RET long cable 20m
7095.30 RET long cable 30m
7095.40 RET long cable 40m
7095.50 RET long cable 50m
7095.60 RET long cable 60m
7095.70 RET long cable 70m
7095.80 RET long cable 80m
7095.90 RET long cable 90m
7095.110 RET long cable 110m



8-Pin
Connector
Pin 1 +12 V +12 V
Pin 2 Not connected Not connected
Pin 3 RS-485B RS-485B
Pin 4 Not connected Not connected
Pin 5 RS-485A RS-485A
Pin 6 +24 V +24 V
Pin 7 DC return DC return
Pin 8 Not connected Not connected

Updated: Apr 5 2010 12:00PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 540
The indoor antenna is designed to blend into a wall or
ceiling inside a building and is the base antenna for
the Powerwave distributed antenna system. The indoor
antenna covers all bands from 800 MHz up to 2700 MHz
and supports multiband operation. Easy-to-install dual
band antennas from Powerwave are deployed in numerous
wireless networks worldwide. Using fewer antennas of
discreetly functional design beats using numerous antennas
of unsightly size and appearance especially with todays
aesthetic concerns.
Indoor Antennas
Power wave

POWERWAVE

Indoor Dual Band Antennas
Cross Polarized Page
Indoor Dual Band Cross Polarized Antennas, 824-896/850-990 MHz 543

Indoor Multiband Antennas
Vertical Polarized Page
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz 545

Indoor Antennas
Indoor Antennas
542

POWERWAVE

Dual Band Indoor Antennas
Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
70 9/6.9, 9/6.9 0 216mm (8.5) 7999.00 544
Dual Band Indoor Antennas
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
543

POWERWAVE Dual Band Indoor Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7999.00 Indoor/Outdoor Dual Band Cross
Polarized
POLARIZATION:X-Pol
FREQUENCY (MHz):800/1900
HORIZONTAL BEAM WIDTH ():70
GAIN (dBi dBd):9/6.9, 9/6.9
TILT:0
LENGTH:216mm (8.5)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 800/1900
Frequency band (MHz) 806-896 1850-1990
Gain (dBi/dBd) 9/6.9 9/6.9
Polarization Dual linear slanted
Nominal Impedance () 50
VSWR 1.5:1 1.5:1
Horizontal beam width, -3 dB () 72 56
Vertical beam width, -3 dB () 70 60
Electrical down tilt () 0 0
Front to back ratio (dB) 18030copolar 16 28
Cross polar discrimination (XPD) 0(dB) 20 15
Cross polar discrimination (XPD) 60(dB) 8 4
IM3, 2xTx&43dBm (dBc) <-141
Power handling, average total (W) 50

MECHANICAL SPECIFICATIONS*
Connector 2 x N Female
Connector position Bottom
Dimensions, HxWxD, mm(ft) 216x216x73.7 (8.5x8.5x2.9)
Mounting -
Weight kg (lbs) 0.73 (1.6)
Operating Temperature
Radome Material -
Radome colour RAL 7035, Light grey
Package size, HxWxD, mm (ft) -
Shipping weight, kg (lbs) -
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08182 Rev A Updated: Apr 9 2010 11:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 544

POWERWAVE

Multiband Indoor Antennas
Cross Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
Horizontal
Beamwidth Gain dBi dBd Tilt Length Part Number Page
60/90 6/3.9, 9/6.9 0 0.210m (8") 7336.10 546
360 3/0.9 0 0.185m (7) 7336.00 547
360 3/0.9 0 0.165m (6.5) P360-3-VCHW2-0 548
Multiband Indoor Antennas
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
545

POWERWAVE Multiband Indoor Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
7336.10 Indoor Multiband Panel Vertical
Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):800-2500
HORIZONTAL BEAM WIDTH ():60/90
GAIN (dBi dBd):6/3.9, 9/6.9
TILT:0
LENGTH:0.210m (8)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 800-2500
Frequency band (MHz) 806-896 870-960 1700-1900 1900-2500
Gain (dBi/dBd) 6.5/4.4 6.5/4.4 9.5/7.4 10/7.9
Polarization Vertical
Nominal Impedance () 50
VSWR <1.9:1 <1.5:1 <1.9:1 <1.8:1
Horizontal beam width, -3 dB () 95 85 65 60
Vertical beam width, -3 dB () 85 80 40 40
Electrical down tilt () 0
Front to back ratio (dB) 18030copolar 16 15 12 17
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 50

MECHANICAL SPECIFICATIONS*
Connector 1 x N Female
Connector position 30cm Pigtail cable
Dimensions, HxWxD, mm(ft) 210 x 180 x 42 (8x7x2)
Mounting -
Weight kg (lbs) 1.0 (2.2)
Operating Temperature
Radome Material ASA
Radome colour White
Package size, HxWxD, mm (ft) 240x280x45 (9x11x2)
Shipping weight, kg (lbs) 1.2 (2.6)
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08159 Rev A Updated: Dec 20 2010 12:36PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 546

POWERWAVE Multiband Indoor Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

7336.00 Indoor Multiband Vertical Polarized
POLARIZATION:V-Pol
FREQUENCY (MHz):800-2500
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):3/0.9
TILT:0
LENGTH:0.185m ( 7)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 800-2500
Frequency band (MHz) 806-896 870-960 1700-1900 1900-2500
Gain (dBi/dBd) 3/0.9 3/0.9 3/0.9 3/0.9
Polarization Vertical
Nominal Impedance () 50
VSWR 1.5:1 1.5:1 1.5:1 1.5:1
Beam width: Ceiling Mounted () 360 360 360 360
Beam width: Wall Mounted () 70 70 70 70
IM3, 2xTx&43dBm (dBc) <-150
Power handling, average total (W) 50

MECHANICAL SPECIFICATIONS*
Connector 1 x N Female
Connector position Back
Dimensions, HxWxD, mm(ft) 185 x65 (7 x 2.5)
Mounting -
Weight kg (lbs) 0.2 (0.44)
Operating Temperature
Radome Material ABS
Radome colour White
Package size, HxWxD, mm (ft) 210x200x115 (8x8x5)
Shipping weight, kg (lbs) 0.36 (0.8)
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08158 Rev A Updated: Apr 9 2010 11:06AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 547

POWERWAVE Multiband Indoor Antennas

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
P360-3-VCHW2-0 824-960/1710-2700MHz 360Ceiling
Mount Indoor Omni Antenna
POLARIZATION:V-Pol
FREQUENCY (MHz):824-2700
HORIZONTAL BEAM WIDTH ():360
GAIN (dBi dBd):3/0.9
TILT:0
LENGTH:0.165m (6.5)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) 824-2700
Frequency band (MHz) 824-896 870-960 1700-2170 2300-2700
Gain (dBi/dBd) 3/0.9 3/0.9 3/0.9 3/0.9
Polarization Vertical
Nominal Impedance () 50
VSWR <1.5:1 <1.5:1 <1.5:1 <1.5:1
Horizontal beam width, -3 dB () 360 360 360 360
Vertical beam width, -3 dB () 60 58 55 50
Electrical down tilt () 0
Front to back ratio (dB) 18030copolar n.a. n.a. n.a. n.a.
IM3, 2xTx&43dBm (dBc) <-140
Power handling, average total (W) 50

MECHANICAL SPECIFICATIONS*
Connector 1N-Female With Cable Rg141 of 300mm length
Connector position Bottom
Dimensions, HxWxD, mm(ft) 95x165
Mounting Integrated Ceiling mount
Weight kg (lbs) 0.35 (1)
Operating Temperature -40C to +60C
Radome Material ABS
Radome colour White
Package size, HxWxD, mm (ft) 180x180x150
Shipping weight, kg (lbs) 0.8 (1.8)
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jan 20 2011 4:21AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 548
Powerwaves Clean Site solutions minimize the visual
impact of a complete antenna system and signifcantly
reduce investment and operational costs for network
operators when building new or upgrading existing
networks.
Building permits for existing antenna installations can be
used when replacing old, passive antennas with the Clean
Site solution. This simplifes the site acquisition process
signifcantly and shortens roll-out time considerably.
All Clean Site antennas support remote electrical tilt for
optimization of the coverage footprint and tuning of network
performance. By integrating all functionality into one single
unit, Clean Site offers you a fexible and attractive solution
in the most cost-effective way.
Clean Site

Solutions
Power wave
Clean Site Solutions: Overview POWERWAVE
Clean Site Solutions
Our products provide design and installation flexibility that meet a variety of needs, such as enabling
co-siting of networks and systems and dealing with space and zoning issues limiting the appearance
and location of new installations.
The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of
tower space. High-volume production in several countries ensures rapid delivery.
Our low band antenna covers the full frequency range from 806-960 MHz while the high band
antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band
antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted
amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the
combination, your customized Clean Site single system is contained in one single housing enclosure.
Single System
The baseline for the Clean Site single system is our single band broadband antenna portfolio with
cross polar diversity for either low band or high band.
IntelliMast
As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating
multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the
full broad band antenna range, is the mounting solution to use when more than one sector is covered
from a single location. If a crane free installation is required, the super light weight Intellimast-PL is
the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers
maximum sector coverage with minimum visual impact.
The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site
program. The Clean Site triple solution is based on the high performance triple band antenna
platform and is the superior solution for co-siting. An old installed passive antenna can be replaced
by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two
triplexers without changing the visual impact.
The Clean Site dual solution's basic configuration stems from the Powerwave dual band low
band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units,
tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all
Clean Site units, all of the necessary components are contained in one discrete enclosure.
Dual System
Triple System
550
All Powerwave antennas are delivered with mounting
brackets pre-mounted. The intent is to reduce logistic
and tower crew installation costs for our customers. All
brackets have a high quality surface treatment to maintain
the Powerwave standard for product exposure to severe
environments. By using steel in the sheet metal parts of
the tilt brackets, a robust and rigid design is ensured.
Mounting Solutions
Power wave
551

POWERWAVE

Heavy Duty Tilt Bracket
Part Numbers Page
7256.00 553

Tilt Bracket
Part Numbers Page
7456.00A 554

Triple Mount Bracket
Part Numbers Page
7454.00A 555

Flush Wall/Pole Hose Clamp
Part Numbers Page
7455.00 556

Large Pole Mounting Adapter
Part Numbers Page
7458.00A 557

Mounting Solutions
Mounting Solutions
552

POWERWAVE Mounting Solutions






7256.00 Heavy Duty Tilt Bracket Kit
ANTENNALENGTH: 1.5meter/5feet
WEIGHT:5.5 kg/ 12.1 lbs
CROSS REFERENCE TABLE
Family Part Number
LBB65 747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx
LBB90 748x.xx, 748x.xxA, 548x.xx
DHBB 776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx, 8722.0ST.xxxx.xx, P65-18-XXW2-x, P90-17-XXW2-x
DBB65 775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx, P65-18-XHW2-xx
DBB90 777x.xx
TBB65 778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx, P65-1x-XDHW2-N(D1)
ALP 7804.00, 7824.00, 7834.00, 7838.00
City 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx
Urban 7218.1x
Xurban 7227.1x
AL Antennas 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x
5 Series 547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx
MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D See Drawings
Weight 5.5 kg/ 12.1 lbs
Material Galvanized steel
Packing size, H x W x D Call for info
Shipping weight 5.9 kg/ 13 lbs
Tilt range See diagram
Pole dimension 25.4-114.3 mm (1-4.5)
Panning range NA
Accessory products Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration:IEC 60068-2-64
Sinus Vibration:IEC 60028-2-6
Salt Mist:IEC 68-2-11, test Ka, 35C, 48h, 5% salt

Updated: May 20 2011 8:07AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 553

POWERWAVE Mounting Solutions






7456.00A Tilt Bracket Kit
ANTENNA LENGTH:<1.5 meter/ 5 feet
WEIGHT:3.6 kg/7.9 lbs
CROSS REFERENCE TABLE
Family Part Number
LBB65 NA
LBB90 NA
DHBB NA
DBB65 NA
DBB90 NA
TBB65 NA
ALP 770x.xx(A), 7720.xx(A), 7721x.xx(A), 7735.xx(A), 7740.xx(A), 8720.0ST.xxxx.xx, 8721.0ST.xxxx.xx
City P65-18-XW2-x, P90-17-XW2-x, P65-18-CH-N, P65-21-XH-0
Urban
7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x
Xurban 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas 7337.0x, 7338.0x, 7339.0x
5 Series 570x.xx, 5720.xx, 5721.xx 5735.xx, 5740.xx
MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D See Drawings
Weight 3.6 kg/7.9 lbs
Material Galvanized steel, stainless screws & nuts
Packing size, H x W x D Call for info
Shipping weight 4.0 kg/ 8.8 lbs
Tilt range See diagram
Pole dimension 25-115 mm
Panning range NA
Accessory products
Big Pole Clamp, 7458.00A/ Flush wall,
pole clamp 7455.00 and Triple Mount
Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration:IEC 60068-2-64
Sinus Vibration:IEC 60028-2-6
Salt Mist:IEC 68-2-11, test Ka, 35C, 48h, 5% salt

D031-08419 Rev. A Updated: May 20 2011 7:59AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 554

POWERWAVE Mounting Solutions
The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket
permits independent mechanical and electrical tilting of each sector, offering unparalleled versat




7454.00A Triple Mount Bracket
ANTENNALENGTH: 1.5meter/5feet
WEIGHT:1.5 kg/3.3 lbs
CROSS REFERENCE TABLE
Family Part Number
LBB65 747x.xx
LBB90 748x.xx
DHBB 776x.xx
DBB65 775x.x0
DBB90 777x.x0
TBB65 778x.x0
ALP 7804.00, 7824.00, 7834.00, 7838.00
City 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx
Urban
7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x,
7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x
Xurban 7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas 7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x
5 Series 747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0
MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D See Drawings
Weight 6.8 kg/15 lbs
Material Steel
Packing size, H x W x D Call for info
Shipping weight Call for info
Tilt range
See diagram, Only antennas <1.5 m/ 5
feet
Pole dimension 75-114 mm
Panning range Call for info
Accessory products
Can be used with antenna tilt brackets
7456.00A and 7256.00
All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration:NA
Sinus Vibration:NA
Salt Mist:NA

D031-08417 Rev. A Updated: Apr 5 2010 11:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 555

POWERWAVE Mounting Solutions
Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.5 meter/5 feet. Only one kit per antenna.





7455.00 Flush Wall/Pole Hose Clamp
ANTENNA LENGTH:<1.5 meter/ 5 feet
WEIGHT:0.4/0.9 lbs
CROSS REFERENCE TABLE
Family Part Number
LBB65 NA
LBB90 NA
DHBB NA
DBB65 NA
DBB90 NA
TBB65 NA
ALP NA
City NA
Urban
7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x
Xurban 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas 7337.0x, 7338.0x, 7339.0x
5 Series 570x.xx, 572x.xx, 735.x0A, 5740.x0A, 5745.x0A
MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D See Drawings
Weight 0.4 kg/ 0.9 lbs
Material Galvanized steel, stainless screws & nuts
Packing size, H x W x D 200 x 200 x 20 (mm)
Shipping weight 0.4 kg/ 0.9 lbs
Tilt range NA
Pole dimension 40-100 mm/ 1.57-3.9
Panning range NA
Accessory products
To be used with antenna tilt brackets
7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration:IEC 60068-2-64
Sinus Vibration:IEC 60028-2-6
Salt Mist:IEC 68-2-11, test Ka, 35C, 48h, 5% salt

D031-08418 Rev. A Updated: Apr 5 2010 11:58AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 556

POWERWAVE Mounting Solutions
Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.





7458.00A Large Pole Mounting Adapter
ANTENNA LENGTH:<1.5 meter/ 5 feet
WEIGHT:9.5 kg/ 20.9 lbs
CROSS REFERENCE TABLE
Family Part Number
LBB65 NA
LBB90 NA
DHBB NA
DBB65 NA
DBB90 NA
TBB65 NA
ALP NA
City NA
Urban
7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x
Xurban 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas 7337.0x, 7338.0x, 7339.0x
5 Series NA
MECHANICAL DRAWINGS


TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D See Drawings
Weight 9.5 kg/ 20.9 lbs
Material Galvanized steel, stainless screws & nuts
Packing size, H x W x D 200 x 200 x 20 (mm)
Shipping weight 10 kg/22 lbs
Tilt range NA
Pole dimension Max 215/ mm 78.5
Panning range NA
Accessory products
To be used with antenna tilt brackets
7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration:IEC 60068-2-64
Sinus Vibration:IEC 60028-2-6
Salt Mist:IEC 68-2-11, test Ka, 35C, 48h, 5% salt

D031-08520 Rev. A Updated: Apr 5 2010 11:57AM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 557
Antenna FAQ POWERWAVE
Antenna FAQ
A: Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for
multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few.
Q: Are your indoor antennas broadband (7336.00, 7336.10)?
A: The gain is dependent on the frequency used. The stacking distance of the elements is changed
relative to the frequency. This means that the gain will increase with a higher frequency.
Powerwave always tries to give you the best information possible, and therefore we specify the gain
at common used frequency to help you implement the antennas easily in your network.
Q: Why do you specify different gain for the same antenna in your data sheet?
A: Mechanical structure of antennas are designed in different ways. Powerwave uses either the
reflector as the structure, or the radome in a combination with the reflector. When using the reflector
as the base for the mechanical structure, the radome is only used for weather protection, and
therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there
is no benefit to use the reflector as the mechanical structure as it would increase the overall weight
of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of
reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the
latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to
minimize product weight while maintaining a robust and reliable solution.
Q: Why do you use different materials in your radomes?
A: Powerwave designs triple band antennas by using one low band antenna throughout the whole
length, while you have the two upper band antennas on top of each other. This means that the high
band antenna at the upper part of the antenna needs more internal cabling compared to the high
band antenna at the lower part. This extra internal cabling introduces some more losses, and the
result is that the gain of the upper high band antenna is slightly lower.
Q: Why do you have different gain on your triple band antennas?
A: The antenna patterns are available at our webpage, please visit:
www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna
patterns for many different planning tools. Please contact us if you need assistance.
Q: How do I get antenna patterns?
A: When Powerwave is stating broadband antennas, we are indicating that these can be used for more
than one system. We usually state low broadband, meaning that the antennas can be used for
systems operating from 806 to 960 MHz. High band usually means that the antennas can be used
for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design
and produce broadband antennas is to achieve logistical benefits for our global customer base,
allowing for deployments in all markets worldwide.
Q: You are mentioning broadband antennas - how do you define that?
558
Powerwaves NetWay

Solution Suite maximizes return


on investment of wireless infrastructure by enabling
network discovery, diagnosis and resolution from a
centralized software interface in combination with network-
aware hardware. NetWay gives you all the tools for fault,
confguration, performance and security management.
Centrally monitor and manage critical network resources,
and adjust cell coverage during peak and off-peak hours,
saving time, money and reducing the carbon footprint
through fewer truck rolls.
Network Management
Power wave

POWERWAVE NetWay Vision Software Solution
The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product
provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies.

NWV-001 NetWay Vision Management Module
GENERAL SPECIFICATIONS
NetWay Vision Licensing
Software license based on number of managed network elements and number of con-current PC client
users

NetWay Server Requirements
Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network
Interface, Windows Server OS 2003/2008

User PC Client Requirements
Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP,
Internet Explorer 6/7

Standard Warranty
Updates and fixes for one full year, after installation of NetWay Vision is completed

Extended Warranty
Yearly Software Upgrades and Yearly Updates are available and can be separately purchased

Documentation
User Guide: D044-05258, Administrator Guide: D044-05313

Commercialize
Current Release NetWay Vision

Updated: Aug 4 2011 2:27PM Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data. 560

POWERWAVE

Part Number Page

Part Number Page

Part Number Page
010-11177-0214 40 7218.15 404 7476.00 313
010-11182-02nn 41 7218.19 405 7476.02 314
010-11183-02nn 42 7225.04 416 7476.06 315
010-11198-0002 85 7226.03 417 7477.00 316
010-50025-0232 43 7226.04 418 7477.02 317
24501, 24511 39 7227.04 423 7477.06 321
25001, 25011 44 7227.14 422 7478.00 318
25002, 25012 45 7228.03 425 7478.00A 324
25014, 25016 46 7228.04 426 7478.02 322
25101, 25111 47 7228.06 427 7478.06 323
25102, 25112 48 7228.08 428 7481.00 340
25103, 25113 49 7230.04 430 7482.00 329
4168.11.33.00 409 7231.04 431 7483.00 333
4168.11.33.02 410 7231.06 432 7483.00A 334
4168.11.33.03 411 7232.04 433 7486.00 341
4168.11.33.06 412 7232.07 434 7486.02 342
4168.11.33.52 413 7233.04 435 7486.06 327
4168.21.33.00 407 7233.06 436 7487.00 328
4168.21.33.03 408 7233.08 437 7487.02 336
5472.00 308 7255.03 394 7487.06 337
5473.00 309 7255.04 401 7488.00 330
5477.00 310 7256.00 553 7488.00A 332
5478.00 311 7263.01 392 7488.02 331
5478.06 312 7263.04 393 7488.06 335
5483.00 338 7270.02 415 7700.00 282
5488.00 339 7271.02 419 7700.06 283
5701.00 276 7271.03 420 7701.00 284
5701.02 277 7272.02 424 7701.00A 285
5701.06 278 7273.02 429 7701.02 286
5721.00 279 7273.03 421 7701.02A 287
5721.02 280 7281.02 395 7701.06 288
5722.00 281 7281.04 396 7720.00 289
5740.00 300 7282.03 388 7721.00 290
5760.00 303 7332.00B 446 7721.00A 291
5760.02 304 7332.02B 443 7721.02 292
7070.10 (AC) 527 7332.06B 444 7721.02A 293
7070.30 (24 V) 528 7333.00B 441 7721.06 294
7070.50 (-48V) 529 7333.02B 440 7721.10 295
7072.10 (AC) 530 7333.06B 442 7721.40 296
7072.30 (24 V) 531 7334.00B 447 7722.00 297
7072.50 (-48V) 532 7334.02B 445 7722.00A 298
7085.XX 539 7334.06B 448 7735.00A 299
7095.XX 540 7336.00 547 7740.00A 301
7216.03 387 7336.10 546 7745.00A 302
7217.03 391 7390.00B 385 7750.00 362
7217.04 390 7454.00A 555 7750.00A 363
7217.11 389 7455.00 556 7750.OST.0002.00 505
7218.03 397 7456.00A 554 7752.00 364
7218.04 398 7458.00A 557 7752.00A 365
7218.05 402 7472.00 319 7752.OST.0002.00 504
7218.09 403 7472.00A 320 7755.00 366
7218.13 399 7473.00 325 7755.00A 367
7218.14 400 7473.00A 326 7755.OST.0002.00 503
Part Number Index
Part Number Index
Part Number Index
Part Number Index
561

POWERWAVE

Part Number Page

Part Number Page

Part Number Page
7760.00 353 8785.0ST.0000.00 477 AR1717/90609 125
7760.00A 354 8785.0ST.B100.00 478 AR200/00 174
7760.02 352 8785.0ST.B100.04 479 AR200/90109 176
7760.03 355 8785.0ST.B400.00 480 AR2200/00109 175
7760.06 356 8785.0ST.B400.02 481 AR2212/052 177
7760.40 357 8785.0ST.B400.04 482 AR2212/05209 178
7762.00 359 ALR0062/00109 141 AR2700/50209 126
7765.00 358 ALR1200/00209 143 AR2700/50409 127
7766.00 360 ALR1200/90209 142 AR2727/50609 128
7780.00 369 ALR1212/00209 144 AR3400/01109 179
7780.00A 370 ALR2200/00209 145 AR3400/91109 180
7782.00 371 ALR2200/90209 146 AR3434/51109 181
7782.00A 372 ALR2212/00119 147 AR3700/50409 129
7785.00 373 ALR2212/00129 148 AR4200/01209 182
7785.00A 374 ALR2212/92202 149 AR4600/05309 183
7840.00 439 ALR2222/00109 150 AR4640/05309 184
7850.00B 449 ALR3200/00109 151 AR6500/00109 130
7999.00 544 ALR3200/01109 152 AR6512/00229 131
8110.10 512 ALR3200/90109 153 AR6512/00239 132
8110.40 509 ALR3200/91109 154 AR6517/01429 133
8210.10 510 ALR3232/51109 155 AR6517/01439 134
8210.40 511 ALR3242/03039 156 AR6517/01459 135
8211.10 515 ALR3246/00309 157 AR6522/01109 136
8211.40 516 ALR3246/010 158 AR6560/00209 137
8212.10 513 ALR4200/00209 159 ATR1200/001xy (GSM 900) 186
8212.40 514 ALR4200/01109 160 ATR1200/002xy (GSM 900) 187
8220.10 519 ALR4200/01209 161 ATR1200/901xy (EGSM 900) 188
8220.40 518 ALR4600/00109 162 ATR1200/902xy (EGSM 900) 189
8230.10 522 ALR4600/00119 163 CEV-000-000-001 101
8230.40 521 ALR4600/00209 164 CM1000-AMPS-xxx 86
8510.10 524 ALR6200/00109 165 CM1001-EGSM-xxx 87
8510.40 525 ALR6212/00102 166 CM1002-DPBXBC 79
8720.0ST.B400.00 484 ALR6212/90129 167 CM1007-DBPXBC-xxx 81
8721.0ST.0000.00 487 ALR6212/90139 168 CM1015-DPBXBC-xxx 83
8721.0ST.B400.00 485 ALT1200/00209 169 CW0-000-000-003 99
8722.0ST.0000.00 488 AM1200/05309 171 G3L-1829-120 11
8722.0ST.B400.00 486 AR0027/50409 110 G3L-1929-160 12
8760.0ST.0000.00 492 AR0065/00109 111 G3L-2129-140 13
8760.0ST.B100.00 490 AR1200/05309 172 G3L-850-160 9
8760.0ST.B400.00 491 AR1200/95209 173 G3l-850-180 7
8780.0ST.0000.00 464 AR1700/80208 112 G3L-929-135 10
8780.0ST.B100.00 465 AR1700/80209 113 LGP12101 71
8780.0ST.B100.04 466 AR1700/80218 114 LGP121nn 69
8780.0ST.B400.00 467 AR1700/80219 115 LGP138nn 75
8780.0ST.B400.02 468 AR1700/80229 116 LGP141nn 90
8780.0ST.B400.04 469 AR1700/80408 117 LGP145nn 88
8782.0ST.0000.00 470 AR1700/80409 118 LGP146nn 89
8782.0ST.B100.00 471 AR1700/80418 119 LGP174nn 51
8782.0ST.B100.02 472 AR1700/80419 120 LGP175nn 52
8782.0ST.B100.04 473 AR1700/80429 121 LGP18104 70
8782.0ST.B400.00 474 AR1700/90209 122 LGP18510, LGP18520 53
8782.0ST.B400.02 475 AR1700/90409 123 LGP18520, LGP18521 54
8782.0ST.B400.04 476 AR1700/90419 124 LGP185nn 55
Part Number Index
Part Number Index
Part Number Index
Part Number Index
562

POWERWAVE

Part Number Page

Part Number Page

Part Number Page
LGP18611 57 P65-18-XHW2-MM 495 RTM1GU-J2J1.L2L1 200
LGP186nn 56 P65-18-XHW2-RR 494 RTM1GU-L2L1 201
LGP192nn 50 P65-18-XXW2-M 498 SB400-A 204
LGP195nn 91 P65-18-XXW2-R 497 SB400-B 205
LGP213nn 73 P90-14-XLH-RR 460 Tap-In 217
LGP215nn 33 P90-15-XLH-RR 461 TS07-AWDB111-001 62
LGP219nn 92 P90-16-XLH-RR 462 TS07-AWDB112-001 63
LGP23302 76 P90-17-XXW2-M 500 TSAW-07BP111-001 58
LGP233nn 74 P90-17-XXW2-R 499 TT08-19DB111-001 64
LNKA800 209 RH004000/003 221 TT19-08BP111-001 65
LNKA900 212 RH004002/001 226 TT26-0000112-0n1 35
LNKC1800 213 RH100020/101 227 TT8D-0000112-0n1 37
LNKC1900 211 RH100020/211 228 TTAW-0000112-001 60
LNKF100 214 RH200020/101 229 TTAW-07BP111-001 59
LNKF400 210 RH200020/211 230 TTAW-60BW111-001 61
LNKF800 215 RH201022/101 231 TU09-000001n-001 66
MF0-004-000-002 96 RH201022/211 232 TU9E-28BW01n-00n 67
MF0-048-000-001 97 RH300020/101 233 UA107 62/1 267
NP50B0-22111 191 RH300020/211 234 UA107 62/2 268
NP5O-11111 192 RH304022/03A 260 UA107 62/3 269
NPBO-11111 193 RH304022/101 235 UA107 62/4 270
NPBO-11311 194 RH304022/211 236 UA115 04 207
OS-0851-P0-XXX 15 RH305022/03A 261 UA115 04/84, UA115 04/85 265
OS-0921-V0-XXX 21 RH308022/03A 262 VersaFlex 7.0 103
OS-0933-E0-XXX 25 RH309022/101 237 VersaFlex 9.0 104
OS-0951-P0-XXX 16 RH309022/211 238
OS-1821-H0-XXX 22 RH330020/101 239
OS-1833-E0-XXX 26 RH334022/101 240
OS-1851-H0-XXX 17 RH400020/101 241
OS-1921-H0-XXX 23 RH400020/211 242
OS-1933-E0-XXX 27 RH500020/101 243
OS-1951-E0-XXX 18 RH500020/211 244
OS-1991-H0-XXX 28 RH600020/101 245
OS-2133-E0-XXX 29 RH600020/211 246
OS-2151-E0-XXX 19 RH601022/101 247
P360-3-VCHW2-0 548 RH601022/211 248
P65-15-XD-N 307 RH602022/101 249
P65-15-XDHW2-N 380 RH621010 222
P65-15-XL-2 344 RH700030/101 219
P65-15-XL-4 345 RH700030/101 250
P65-15-XL-R 453 RH705032/101 251
P65-15-XLH-RR 457 RH770020/101 252
P65-16-XL-2 346 RH777722/251 253
P65-16-XL-4 347 RH805022/101 254
P65-16-XL-6 348 RH805022/211 255
P65-16-XL-R 454 RH900020/101 256
P65-16-XLH-RR 458 RH900020/211 257
P65-17-XDHW2-N 378 RH909022/251 258
P65-17-XL-2 349 RTM1GU-A2A1 196
P65-17-XL-4 350 RTM1GU-A2A1.J2J1 197
P65-17-XL-R 455 RTM1GU-A2A1.J2J1.L2L1 195
P65-17-XLH-RR 459 RTM1GU-A2A1.L2L1 198
P65-18-XDHW2-N 376 RTM1GU-J2J1 199
Part Number Index
Part Number Index
Part Number Index
Part Number Index
563
About Powerwave Technologies
A global leader in end-to-end wireless coverage and capacity solutions, Powerwave Technologies, Inc. offers cutting
edge wireless infrastructure to address the demands of enterprise and commercial customers. Powerwave offers a
comprehensive suite of solutions, including Antennas, Base Station Solutions and Coverage Solutions. Powerwaves
product line supports all wireless network protocols and frequencies including Next Generation Networks in 4G LTE
technology. Powerwave solutions, products and services also help wireless operators and OEMs reduce capital and
operating expenses, speed rollout of services, improve coverage and capacity, and reduce environmental impact.
Sales by Region
U.S. & Canada
USSales@pwav.com
Latin America
SouthAmericaSales@pwav.com
Europe
EuropeSales@pwav.com
Middle East & Africa
MEASales@pwav.com
Asia-Pacifc
APACSales@pwav.com
Support by Region
Customer service ofered 24 hours a day
Customer Service
+1 888 PWR WAVE
(+1 888 797 9283)
Technical Support Americas
Support@pwav.com
+1 888 PWR WAVE ext. 3
(+1 888 797 9283)
Technical Support Asia-Pacifc
TechSupportHK@pwav.com
Technical Support Europe
TechSupport@pwav.com
+46 8 540 822 00
Quality and Environmental
Management System
Certifcations
Copyright 2012, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave Technologies, and the Powerwave logo are registered
trademarks of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Inside Out Solutions, Intellimast, InView Management System,
LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus, Performance Boost, PowerBoost, RapidFlex, SubTerra, Tap-In and VersaFlex are trademarks of
Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications Standards Institute. Other trademarks referenced are the
property of their respective owners. All specifcations are subject to change without notice. Please contact your Powerwave representative for complete
performance data.
Worldwide Corporate Headquarters
1801 East St. Andrew Place
Santa Ana, CA 92705 USA
+1 714 466 1000
+1 714 466 5800 FAX
www.powerwave.com
Contact Us
ISO 9001
TL 9000
TickIT
ISO 14001
D031-08643 Rev. E 01/12

You might also like