Professional Documents
Culture Documents
MicraSteel 100 barg lters have been specically designed and manufactured for high efciency ltration of gases and liquids in critical applications. Manufactured from solid steel bar stock in accordance with the NACE MR-01-75 specication, they can be used in the pressure range from full vacuum to 100 barg (1500 psig). MicraSteel lters are suitable for use with all grades of MicraTube, MicraLescer and MicraMesh. All sizes are available with or without a drain connection.
Filter model
pipe size
dimensions (mm) B C D
Element size
29 60 34 90
17 35 20 53
65 65 65 65
20 20 20 20
70 70 180 180
Ordering: For MicraSteel lter housings with a drain connection include sufx [ D ]. For MicraSteel lter housing with PTFE seals specify [ F ] or [ FD ].
Specication Model Maximum working pressure Maximum working temperature Filter material Standard seal material Filter efciency MST-102 & 104 100 barg (1500 psig) 200C (392F) 316L Stainless Steel Viton refer to MicraTube / MicraLescer / MicraMesh specication
Technical notes 1 2 3 4 5 The drain connection size is the same as the pipe size except for models MST-104 which are 1/4" NPT. Mounting brackets are available as an accessory. For higher temperature operation consult with factory. Filter cartridges must be ordered separately (MicraSteel housing only supplied). Flow rates are a 7 barg (100 psig). Use the conversion chart for ow rates at other pressures. 29
82
44.5
6.5 Correction factor Operating pressure Correction factor barg psig For maximum ow rate multiply model ow rate in the table by the correction factor closest to the actual working pressure 1 15 0.3 2 30 0.2 4 60 0.75 7 100 1 10 150 1.2 15 200 1.5 20 300 1.7 50 750 2.5 100 1500 3.5
T +44 (0)191 417 7816 F +44 (0)191 415 3748 E sales@micralter.com www.micralter.com