Professional Documents
Culture Documents
Machine Coner
Machine Coner
LAB REPORT
Course Code: YM-4014
Semester: 7th
Section: A
Group: 1 ODD
Experiment No.2
Study of Ring bobbin feeding Mechanism to (Autocone) Match Coner
M.Farooq Kokab
10-Ntu-031
Nov 2013
YM-4014
Abstract:
M.Farooq Kokab
10-Ntu-031
Nov 2013
YM-4014
Table of Contents
Abstract:............................................................................................................................................i
Table of Contents.............................................................................................................................ii
1.Introduction ..................................................................................................................................1
1.1.Objectives..................................................................................................................................1
2.Equipment and Materials..............................................................................................................1
3.Method..........................................................................................................................................1
4.Results...........................................................................................................................................1
5.Discussion ....................................................................................................................................2
6.Conclusions...................................................................................................................................2
7.References.....................................................................................................................................2
8.Appendix.......................................................................................................................................2
ii
M.Farooq Kokab
10-Ntu-031
1.
Nov 2013
YM-4014
Introduction
1.1. Objectives
To feed the yarn ring bobbin to match coner or auto cone
To understand the functions of different parts in feeding mechanism
To know about the different types of feeding mechanism in auto cone department
2.
3.
Method
4.
As the ring stops after completed doffing than auto cone automatically started.
Observed the different parts of auto cone in during feeding action. Also observed the tray
type and magazine type system by us.
At the end we run the m/c and observed the functions.
Run the m/c to understand the operation of feeding mechanism.
Results
M.Farooq Kokab
10-Ntu-031
5.
Discussion
6.
Conclusions
7.
References
8.
Appendix
Nov 2013
YM-4014