You are on page 1of 1

DRAFT

Width

Slip resistant surface


4 - 6" curb

Slope = 1/2" per foot

For single row of freestalls - 2" For double row of freestalls - 4"

Well drained compacted subgrade

An Elevated Crossover in a Freestall Row Cross Section View


Scraper Travel

1 1
Scraper Travel

DRAFT

Grooves details: 3/8 - 1/2" wide, 3/8 - 1/2" deep, 3 - 5" on center

Grooves details: 3/8 - 1/2" wide, 3/8 - 1/2" deep, 2-1/2 - 3-1/2" on center

Note: Use closer groove spacing for smaller anima l Diamond Pattern Floor Grooves Plan View 2 1 Parallel Pattern Floor Grooves Plan View
Grooves details: 3/8 - 1/2" wide, 3/8 - 1/2" deep, with well defined corners

2 2

Final surface should be even to provide good support for cows hooves

DRAFT

Final surface

Notes : Use 3,500 psi or better air entrained concrete. Well drained compacted subgrade. 4 - 8" thick floor depending on anticipated vehicle weight. Remove sharp edges and exposed aggregate before allowing cows access. Form grooves before curing or saw in later.

www.abe.psu.edu

FL

Cooperative Extension

AGRICULTURAL & BIOLOGICAL ENGINEERING

DRAFT

AL O G ra R L D ve SU A C at s, e: M RF ND RO 02 c F SS /1 a r A 8/ C 07 lan OV d, E ER Ty D E S so TA he n, et W IL # 1 ils S of on 1

Typical Floor Groove Patterns for Cow Traffic Areas Cross Section View

2 3

FR

EE S

No. DIP 851

DRAFT

DRAFT

Curb

Curb

You might also like