Professional Documents
Culture Documents
DC ENERGY SUPPLY
We made a dc energy supply, a energy supply is a device that supplies electric power to an electrical load. The term is most commonly applied to electric power converters that convert one form of electrical energy to another.
In this case the energy supply of we made, transform the alternating current to direct current, whit two outputs, one of 5v and the other of 12v.
I. We designed the circuit in the program orcad II. We printed the circuit III.We transferred the circuit to the copper plate with the help of an iron IV.We introduced the copper plate to corrosive acid V.We washed the copper plate
VI.We put the spray WD-40 to the copper plate VII.We drilled the Copper plate VIII.We put the components for welding IX.We performed the necessary tests X. We put the varnish to the copper plate
TEST CARD
The function of this card is to test the basic microprocessor projects. The integrated can be programmed to perform the instructions provided by the user.
HOW WE MADE THE TEST CARD I. We introduced copper plate printed in the American Tiner II. We cleaned very fine the copper plate with a sponge III.We drilled the necessary holes in the Copper plate IV.We put the spray WD-40 to the copper plate V.We put the components for welding
VI.We performed the necessary tests VII.We put the varnish to the copper plate VIII.We programed the microprocessor whit the program . IX.We cheeked of all Works fine X. We connected the power supply to the test card