You are on page 1of 1

JV80.DK Help File Loading in the file JV80.

DK will setup Band-in-a-Box for the Roland JV80 multi-timbral synthesizer module. It will setup: 1. Drum #'s for the General Midi Standard(Standard Roland Drum Note Numbers). 2. General Midi (GS) Patch Map 3. Startup Patches and Channels in the Midi Settings Window. The Roland JV80 offers 8 channel Multi-timbral capability and 28 note polyphony with a vast array of 18 bit sounds that can be used in a wide variety of musical situations. There are A,B and INT(internal) sound banks on the JV80 with 64 tones available on each making a total of 192 tones on board. However, only the A and B banks were accessible via Patch changes 0 to 128 which is the limit for the General MIDI Patch Map. Select "Performance-Play" and any one of the Bank or Number keys for a patch that can accept more than one Instrument/MIDI channel at once.No further setup is required once the file JV80.DK has been loaded via "Load Drumkit From Disk" under the Drums pulldown menu. Please be aware of the Voice Reserve settings for each MIDI channel or the notes from each instrument Band-in-a-Box is outputting might not be heard. Have Fun!

You might also like