Bell Style Coinless Phone
Application
1. The OTC-2000 is designed to work anywhere a standard 2500 type telephone
instrument is used.
2. To operate as a “Charge-A-Call” instrument, all restriction functions must be
handled by the central office, or other restriction / routing device
3. A gas tube or other similar protection is recommended for any telephone line
using this phone.
4. The OTC-2000 is mountable to any standard pay telephone enclosure of
mounting back plate
Eeatures.
1. OTC-2000 is made of 14-gauge cold rolled steel and is finished with durable
polyester powder coat paint.
2. All major components are modular for easy field replacement and cost
effectiveness.
Metal DMF keypad assembly is moisture, fire, and shock resistant.
Armored hook-switch lever assembly.
Electronics are conformal coated to resist moisture and corrosion.
yee
Field adjustable noise reduction.
‘Tamper resistant locking system.
Armored handset assembly is equivalent to standard coin telephone handsets.
Volume amplification provides 3 steps of additional volume to meet ADA
requirements.
10. Heating aid compatible and FCC / ACTA registered.
11. Telephone line powered; 42VDC to 56VDC.
Loop current range: 20mA to 90mA.
12. Measures: 14.5°H X 7.6°W X 6”D.
Weight: 24 Ibs (10.89KG)
Installation Instructions
yeas
1. Separate the upper housing from the lower housing of the OTC-2000. by
unlocking the front housing lock, which is located on the right side of the
upper housing, Insert the “TEE” wrench into the slot located above the upper
housing lock and turn clockwise % turn. To open, pull the upper housing
away from the lower housing. Unplug the RJ-11 telephone cable.
5 bg crSBeeBliea tte
ENON erent Skier 1 stbetians
/ 1) HTelecommunications Equipment Houston,1x770e4 Intemational rageet7
281-550-55922. Select the mounting location and mount the lower housing using at least 4 of
mounting hole locations. (It is recommended that you mount the phone to a
concrete wall, or use a mounting back plate with an adapter plate.)
3. Connect the C/O wires to the terminal block, which is located on the OTC-
2000 lower housing.
4. Connect the earth ground to the center screw of the terminal block.
5, Connect the RJ-L1 cable to the OTC-2000 keypad PCB. Attach the upper
housing to the mounted lower housing.
6. Perform functional testing to determine that the telephone and any
supplementary equipment are operating properly.
7. Field adjustable noise reduction: After mounting the phone, the installation
personnel must reduce the noise by adjust the CON3 jumper. The default
volume is NORMAL. The adjusting method is very simple:
Dial a number and talk. If the other side gets a too loud voice, adjust the
jumper to LOW. If the other side gets a too low voice, adjust the jumper to
HIGH.
Major components list
Contact OTC Telecom (800-753-1707) for any replacement parts that may be needed.
OTC-2000 armored keypad assembly.
Handset assembly, 18 inch.
Handset assembly, 32 inch.
Vandal resistant upper housing lock
fey
Tour
d Globélstoplerof bic | STELEmetprses.inc. gop gpsege35
L pl Tesacioynatte 1900-894 483
meet mo" Bsistipment Houston. 177084 291-550'5502 Pageaot?
MeOTC-2000 Elite Cointess Phone
Fave
gt 3 0 OM
a Tollfree
OFPublic | GTELEntetprisesine. 1 gnc geseaes:
omc t Tesioclaynd.riie "800-861-4825 rages
puipment Heuston. 177064 381-550-5502