Professional Documents
Culture Documents
9001188
9001188
ww
Step 4: Using 7/16 deep well socket for A driver (see step 5).
w. p
re
ss
Step 7: Now you can access the inlet Elbow for removal.
Very Important, Please Note: If you are having difficulty with your pressure washer we advise you take it to an authorized service center to be examined by a factory -trained professional. Caution : Any repairs or disassembly conducted by untrained or unauthorized persons may result in machine damage and/or personal injury and will void your new machine warranty. Product improvements, part substitutions, manuals and parts lists are updated frequently at the factory and subject to change without notice. PressureParts.com shall not be responsible for any damage caused by, use of products, improper installation of products, injury to personnel, lost income due to damages.
ur
Step 8: Carefully wiggle plastic elbow While pulling apart from black housing. Re-install new elbow in reverse order.
Step 2: Carefully separate rear assembly as shown above. Be careful not to lose small springs and internal parts.
ep
ar ts
Step 6: Lightly tap socket. Pump head will drop out the bottom of the cage.
.co m