You are on page 1of 1

Bridge Plug Inflatable Packers

INFLATABLE BRIDGE PLUGS


STANDARD BRIDGE PLUG 0 17"-30" IBP434SE2000

Suitable fr perman wells and bore holes.

ealing of

sed prior to well abando ent in conjunction with grouting procedures. Designed with two valves to prevent over-inflation and prevent deflation. nge. Standard fixed end r ,\ nge Slidin end ran run-in diameters. z 11141F II
0

44

1 to le for small

Suitable for cased and open hole. Lifting lugs top and bottom allow fas and eff ctive handling.

INFLATED AN
Bri n s nda
-

AI%

tandard casing si pon request.

Ilk %No
STANDARD MAXIMUM CASING SIZE ID 736.6mm OD OF PACKER 434mm EFFECTIVE LENGTH 2000mm INFLATION VOLUME LITRES 400 PERCENTAGE INFLATION DIA
69.7*/.

DIFFERENTIAL PRESSURE CAPACITY SUPPORTED UNSUPPORTED KPA KPA


2000 800

TABLE PACKER PERFORMANCE GLADE CALY

ALL SIZES AND PRESSURES AVAILABLE ON REQUEST

Replacement Inflatable Packers and Elements Pty Ltd 29 Wheeler St Belmont 6104, Perth Western Australia Tel: (+61 (08) 9475 0700 Fax: +61 (08) 9475 0770 packers@ripe-packers.com

www.ripe-packers.com

Supplier and manufacturers of well screen PVC rubber k-packers, well packer tri-seals, equipment and services.

You might also like