You are on page 1of 4

NOKIA

Nokia Cellular Transmission Hopper Manager C4.8

Release Note

Nokia Corporation

1(4)

RELEASE NOTE
Product item codes for Hopper Manager C4.8 release:
Product Family/Equipment: Structure Item, Name and Code Hopper Manager P38205.01 Current revision L1 New code New revision M0

New features in FlexiHopper C4.8:


Release Description:

Added support for OSPF. Added support for OSPF/SNMP licensing. Added support for Flexbus 2 licensing. Show conflicting shared settings between units in a protected system or radio hop. The actual master unit in a protected hop is used to display the protected settings. Show MetroHopper disabled channels Added support for new software releases.

Customer Documents:
Structure item name FlexiHopper User Manual FlexiHopper User Manual Media format PDF set on CD-ROM PDF set in NOLS Item code C33513.09J0 C33513.85J0

6.7.2005

RN_HopperManager_C4.8.doc

2(4)

RELEASE NOTE
Compatibility of Hopper Manager C4.8
Network element dependencies Hopper Manager C4.8 supports following network element software RRIC P55298.01 C2 / P55285.01 B2 FIU 19 P55230.01 A8 / P55234.01 F4 FIU 19E P55303.01 C3 / P55306.01 B0 FlexiHopper P55040.01 H3 / P55046.01 E4 FlexiHopper Plus P58040.01 D6 MetroHopper P55820.01 F0

6.7.2005

RN_HopperManager_C4.8.doc

3(4)

RELEASE NOTE
Known limitations Hopper Manager bugs here
Known bugs 1 Effect Explanation Causes traffic lost No Corrected in release C4.9

Wrong Setting the TX Frequency and Maximum TX Power near configurations the limits of the ranges may sometimes fail when modified in radio in combination with Capacity and/or Modulation. To avoid this, configure separately TX Frequency after the other modifications, or repeat the setting if the error occurs.

Appendices:

6.7.2005

RN_HopperManager_C4.8.doc

4(4)

You might also like