You are on page 1of 1

1. .

Using the AGA method, calculate the transmission factor and friction factor for gas flow in an NPS 20 pipeline with 0.375 in. wall thickness. The flow rate is 250 MMSCFD, gas gravity = 0.6, and viscosity = 0.000008 lb/ft-sec. The absolute pipe roughness is 600 in. Assume a bend index of 60, base pressure = 14.73 psia, and base temperature = 60F. If the flow rate is doubled, what pipe size is needed to keep both inlet and outlet pressures the same as that at the original flow rate?

You might also like