Professional Documents
Culture Documents
AL21E
15.317.8 mm H 2.99 mm
Items Specifications Appearance Casing Hand fitting Hand setting stem Dial Casing ring Rev. 02 09 05 07 05 02 01 Page 1 2 3 4 5 6 7
Date: 13/Apr./'12
S.EPSON Products
MOVEMENT SPECIFICATIONS
CAL. AL21E
Analog Quartz 6 3/4 8''' Standard Series Movement / Three Hands (H/M/S) 1. MOVEMENT DIMENSIONS
Outside diameter Casing diameter Total height 15.30mm(3-9H) 18.20mm(12-6H) 15.30mm(3-9H) 17.80mm(12-6H) 2.99mm
2. TIME STANDARD
Type of quartz oscillator Frequency of quartz oscillator Accuracy Operating temperature range Regulation device Tuning fork 32,768 Hz 20 seconds per month (on wrist) 5 to 50 Nil (Pre-adjusted)
3. INDICATOR / FUNCTIONS
3 Hands Reset switch Setting mechanism Hour / Minute / Second Crown at normal position : Free Crown pulled out 1st click : Time setting / Reset
4. FEATURES
Jewels Anti-magnetism Stepping motor Maximum unbalance of hands 0 Jewel Over 1600A/m (Direct current magnetic field) Type : Two poles stepping motor Step : 180every second Second hand : 0.06 Nm (6mgmm) Minute hand : 0.6 Nm (60mgmm) Hour hand : 0.5Nm (50mgmm)
5. BATTERY
Type / Size Recommended battery Nominal voltage Battery life Driving current consumption Operation stopping voltage Silver oxide battery /6.8mm t 2.6mm SR626SW ( Maxell, Panasonic, Sony, Seizaiken ) 1.55 V Approx. 2 years Approx. 1.5A 1.1 V
7. TEST OF ACCURACY
Equipment to be used Duration of measurement Microphone to be used SEIKO quartz tester QT-99, Greiner quartz timer-C , Witschi Q-tester 4000 10 seconds Electromagnetic detection type
P.1