Professional Documents
Culture Documents
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
Scope of delivery
Cabinet in basic configuration* (cat. no. WZ-SZB-xxx-17AA-11-0000-011): frame, safety glass front door, two side panels, steel rear door shortened with 3 U module panel with brush strip, lockable, standard roof, raised, with perforated sides, 2 pairs of 19" mounting profiles, earthing bar and cables, cabinet placed on levelling feet. *) Other configurations - see ordering schema.
Technical data
Material:
Frame Side panels Steel door solid Steel door with Plexiglas Glass door Glass door with metal sides Mounting profiles 2.0 mm thick sheet steel 0.8 mm thick sheet steel 1.0 mm thick sheet steel 1.5 mm thick sheet steel, 4.0 mm thick Plexiglas 6.0 mm thick safety glass 2.0 mm thick sheet steel, 6.0 mm thick safety glass 2.0 mm thick sheet steel Construction of the SZB cabinet
Protection degree: IP 20 in accordance with EN 60529 / IEC 529 (does not apply to brush cable entries). On request, IP 41 can be achieved. Surface finishing: Frame, roof, panels, doors, plinth - textured powder paint, light grey (RAL 7035). All other colour options on request. Mounting profiles - Al-Zn coated Outriggers for 800 mm wide 19 racks - galvanised Maximum load capacity:
Base type levelling feet castors - type 150 castors - type 300 Maximum weight of equipment mounted in cabinet 600 kg 150 kg 500 kg
1 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
DESIGN
1. Frames post 2. Frames bottom plate 3. Frames top plate 4. Front door
BASE HEIGHT
Leveling feet: 25-50 mm Plinth: 100 or 200 mm Castors 150: 108 mm Castors 300: 129 mm
2 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
Notes:
Cable opening in the top plate of the cabinet is covered with a knock-out blanking plate (12). The same solution can be found in the roof of the cabinet. Blanking and cable entry plates for openings in the top and bottom plate - see here.
Reference chart
Total width W [mm] 800 600 800 600 600 Usable height HU [U = 44.45 mm] Frame height H [mm] 10 45 U 2096 22 42 U 1963 148 39 U 1830 58 36 U 1696 152 33 U 1563 156 30 U 1430 160 27 U 1296 94 24 U 1163 106 18 U 896 118 15 U 763 6 9 18 21 146 147 54 57 150 151 154 155 158 159 90 93 102 105 114 117 Total depth D [mm] 800 5 17 145 53 Reference number 149 153 157 89 101 113
Note:
Cabinet options in the red shaded fields are available in constant supply from ZPAS S.A.s warehouse (this refers to cabinets with the following configuration: frame, four adjustable mounting profiles, two side panels, front glass door, lockable steel rear door shortened with 3 U module panel with brush strip, standard roof with perforation, four levelling feet, earthing bar and earthing cables for the doors and side panels - cat. no. WZ-SZB-xxx-17AA-11-0000-011). Lead time of other cabinets to be agreed upon with ZPAS Sales Department.
Catalogue number
Click on the above number to see the coding scheme. Click HERE to run SZB cabinet configurator.
Ordering instruction
1. When ordering the SZB cabinet, please provide the appropriate catalogue number according to the above information, which specifies the overall dimensions, type of doors, panels, roof and base. 2. The next step is to specify catalogue numbers of supplementary accessories (such as: shelves, blanking plates, power strips, fan units etc. - see pages 73-108). Supplementary accessories are delivered in separate packaging including fixing hardware. On request it is also possible to mount supplementary accessories in the cabinet.
3 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
SZB 600 mm wide cabinet with front glass door with metal sides and rod-lath lock [Z]
SZB cabinet 600 mm wide, front steel door with Plexiglass [4]
SZB cabinet 800 mm wide, front steel door with Plexiglass and perforation [5]
SZB cabinet 800 mm wide, front steel door with perforation in the bottom part [3]
4 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
SZB cabinet 800 mm wide equipped with blanking plate, fan unit and shelves
SZB cabinet with expanded side panels [F]. The design of this cabinet is based on the SZB 600 x 800 mm frame, while the expanded panels widen the cabinet to 800 mm.
SZB cabinet 600 mm wide with front glass door [1]. Right section of the cabinet is made of shortened steel door and 3 U module panel with brush strip [7].
2 pcs. of 3 U module panels mounted in the 600 mm wide cabinet Steel door shortened and 3 U module panel with brush strip [7], mounted in the rear of the cabinet Steel panel shortened with 2 pcs. of 3 U module panels [E], mounted in the rear of the cabinet
5 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
[2] Roof with extra perforation (top)
[4] Roof with opening 380 x 210 mm for blanking/cable entry plate 420 x 250 mm (blanking/cable entry plate should be ordered separately)
SZB cabinet 42 U height, 800 mm wide with 10 U swing frame. Non-standard version
6 of 7
27.11.2012 22:20
http://www.zpas.pl/index.php?idl=2&idx=szb&pz=&str=&id=&idp=&...
SZB cabinet 1000 mm wide, double-sectioned. Left section equipped with 19" mounting profiles. Right section with mounting angles in 300 mm spacing. Tailor made.
7 of 7
27.11.2012 22:20