Professional Documents
Culture Documents
Chapter 3:
THEORETICAL FOUNDATION AND BACKGROUND MATERIAL: COMPLEX VARIABLES, DIFFERENTIAL EQUATIONS, LAPLACE TRANSFORM
Heating system block diagram (simplied).Actual temp. (output) measured by sensor in the thermostat. Simple electronic circuit (comparator) compares temps. Generates error voltage that acts as as switch to open the gas valve to turn out the furnace. Opening windows and doors etc. in room causes heat loss (disturbance). Process of sensing output and comparing with input to generate error signal called Feedback.
fig_03_01
(a) Open loop, dc-motor, speed control system (b) Block diagram; input voltage to the motor, output of (non linear) power amp. Representation issue for NL blocks.
fig_03_02
Common elements in block diagram of most control systems (Compare to Figs.3-1, 3-2 . Comparators (electronic circuit measures error) . BLOCKS representing transfer functions . Reference sensor . Output sensor . Actuator . Controller . Plant . INPUT or reference signals . OUTPUT signals . Disturbance signal . Feedback loops
fig_03_03
fig_03_04
fig_03_05
fig_03_06
fig_03_07
fig_03_08
2 2n sX (s)
fig_03_09
fig_03_10
fig_03_11
fig_03_12
fig_03_13
fig_03_14
2 n
fig_03_15
H_1(s) G_2(s)
fig_03_16
fig_03_17
Block diagram reduction rst move branch pt. at Y_1 to left of G_2
fig_03_18a
1 + G_1G_2H_1
fig_03_18b
fig_03_19
fig_03_20
fig_03_21
fig_03_22
fig_03_23
Basic properties of SFG . Only for linear systems . Equations for SFG algebraic equations . Nodes are used to represent variables . Signals travel along branches only in direction of arrows . Branch from node y_1 to y_2 shows dependence of node y_2 on node y_1 Other SFG terms Input node (source) - A node that only has outgoing branches Output node (sink) - A node that only has incoming branches
fig_03_25
fig_03_26
fig_03_27
Erroneous operation for SFG of Fig. 3-26(a) Cannot make y_2 an input node; equation for y_2 di!erent from original SFG.
fig_03_28
fig_03_30
Simplication of SFG
fig_03_31
fig_03_32
SFG Terms Forward Path: a path that starts at an input node and ends at an output node and along which no no node is traversed more than once. Path Gain: The product of the branch gains encountered in traversing a path. Loop: A path that starts and terminates at the same node and along which no other node is encountered more than once. Forward-Path Gain: Path gain of a forward path. Loop Gain: Path gain of a loop.
fig_03_33
fig_03_35
fig_03_36
figun_03_01
figun_03_02
figun_03_03
figun_03_04
figun_03_05a
figun_03_05b
figun_03_06
figun_03_07
figun_03_08
figun_03_09
figun_03_10
figun_03_11
figun_03_12
figun_03_13
figun_03_14
figun_03_15
figun_03_16
figun_03_17
figun_03_18
figun_03_19a
figun_03_19b
figun_03_20
figun_03_21
figun_03_22
figun_03_23
table_03_01