This tutorial will allow you to create partitions on any USB Stick storage or External Hard Drive. You will need: Hack Windwos Multi Partition USB Driver.zip Access DEVICE MANAGER: Start > Run > devmgmt.msc Or My Pc > Right Click > Properties > Hardware > Device Manager. At 6th step, make a exactly note of the selected area, Using Notepad Example: USBSTORDisk&Ven_Kingston&Prod_Dara
This tutorial will allow you to create partitions on any USB Stick storage or External Hard Drive. You will need: Hack Windwos Multi Partition USB Driver.zip Access DEVICE MANAGER: Start > Run > devmgmt.msc Or My Pc > Right Click > Properties > Hardware > Device Manager. At 6th step, make a exactly note of the selected area, Using Notepad Example: USBSTORDisk&Ven_Kingston&Prod_Dara
This tutorial will allow you to create partitions on any USB Stick storage or External Hard Drive. You will need: Hack Windwos Multi Partition USB Driver.zip Access DEVICE MANAGER: Start > Run > devmgmt.msc Or My Pc > Right Click > Properties > Hardware > Device Manager. At 6th step, make a exactly note of the selected area, Using Notepad Example: USBSTORDisk&Ven_Kingston&Prod_Dara
This tutorial will allow you to create partitions on any USB Stick storage or External Hard Drive
You will need:
Hack Windwos Multi Partition USB Driver.zip
Access DEVICE MANAGER:
Start > Run > devmgmt.msc Or My Pc > Right Click > Properties > Hardware > Device Manager...
Follow the instruction by the numbers on the Picture... At 6th step, Make a exactly note of the selected area, Using Notepad Example: USBSTOR\Disk&Ven_Kingston&Prod_DaraTraveler_2.0&Rev_PMAP
Select and copy created note, of your Device Instance ID
Now unzip the downloaded file to your desktop and open cfadisk.inf in Notepad
Replace all selected parts in the image, by the one you have copied from the Notepad Then File > Save File > Exit
Now Access DEVICE MANAGER:
Start > Run > devmgmt.msc Or My Pc > Right Click > Properties > Hardware > Device Manager...
Follow the instruction by the numbers on the Pictures...
Important: when presses BROWSE, you have to locate your unzipped files (cfadisk.inf and cfadisk.sys) And select cfadisk.inf
In this case the files are located on the Desktop
Just follow the picture
After pressing Yes, Wait a moment when the driver is being installed! Restart the computer after the installation is recommended.
You are done! Congratulation! Now you will see your USB Stick Storage as LOCAL DISK Thats mean, now you can make any number of partitions with different format too if you like (FAT 16, FAT 32, NTFS, EXT2 {Only Linux} etc) and Windows will recognize them all, as LOCAL DISKS If you dont have any Partitions program, so thats no problem My Pc > Right Click > Manage Storage > Disk Management Localize your External Drive (Normally by the Label or Drive letter) Now backup all your data on the USB Stick Storage or External Hard Drive. (Make sure thats the USB Stick is Selected, not the System Disk C or D normally) Then delete partition
Then create partitions as you like! All right reserved to Victory 2009/04/12