Professional Documents
Culture Documents
3.5 Tubing Drain Tech Sheet
3.5 Tubing Drain Tech Sheet
SPECIFICATIONS
TUBING
3-1/2"
MAX OD
4.500"
MIN ID
3.000"
LENGTH
11"
CONNECTIONS
3-1/2" EUE 8RD
DESCRIPTION:
Klines Hydraulic Tubing Drain is designed to provide a means of equalizing pressures between the tubing and annulus by simply over-pressuring the tubing string to a pre-set point. When the pre-set point is reached, a set of shear screws will break and the external sleeve will move down, uncovering ports in the inside nipple. The pressure differential that causes the shear pins to break is adjustable by adding or subtracting shear screws from the sleeve. The drain is available in most common tubing sizes, as shown below. Opening pressure is generally adjustable between 1558 and 6231 psi.
SHEAR VALUE
NUMBER OF SCREWS 2 3 4 5 6 7 8 PSI 1558 2337 3116 3895 4673 5452 6231
ITEM NO.
1 2 3 4 5
PART NUMBER
00014 00015 VS1XW 19241 19343
DESCRIPTION
MANDREL SLEEVE BRASS SHEAR SCREW O-RING O-RING
QTY.
1 1 8 1 1
PAGE #1