Professional Documents
Culture Documents
Die Casting Power Point
Die Casting Power Point
www.ventilationandfiltration.com
Molten metal is then poured by ladle in to an open steel mould where it is allowed to cool and solidify.
www.ventilationandfiltration.com
The mould is then turned upside down and tapped with a hammer to release the finished casting.
Gravity die casting requires minimal finishing and waste as minimal because excess metal can be melted down and used again.
www.ventilationandfiltration.com
Lawnmowers -
www.ventilationandfiltration.com
www.ventilationandfiltration.com
Materials
The materials used in gravity die casting is a mixture of Zinc and aluminium. Zinc -
Aluminium -
www.ventilationandfiltration.com
In this process you can make: Golf club heads Car engine blocks Radiators -
www.ventilationandfiltration.com
THANKYOU