Professional Documents
Culture Documents
MARKS
Q1 (CLO1) Q2 (CLO1)
/25 /25
TOTAL
/50
QUESTION 1 a. Identify the hydraulic symbol that was given. (C2) Symbol Valve name
(4 marks) b. What is the function of hydraulic components below: (C2) (6 marks) i. Pressure relief valve
ii.
iii.
Hydraulic motor
c. Sketch the cross section with labels and explain briefly the working principle of vane pump. (C2) (8 marks)
d. Compare the differences between pressure relief valve and pressure switch. (C4) Pressure relief valve Pressure switch
(4 marks)
(3 marks) Question 2 a. Sketch the hydraulic circuit to operate double acting cylinder by using mid position open of directional control valve. (C3)
(5 marks) b. State three (3) differences of open cynosure system and close cynosure system. (C4) No Open cynosure system Close cynosure system 1
(6 marks)
c. A hydraulic system need to move a load of 50 kg by using double acting cylinder. The operation will be control by 4/3 way directional control valve with mid position close, lever and detent operated. Sketch the hydraulic circuit base on below requirement: (C4) i. Using Bleed off in both directions to make the piston free to adjust in normal position.
ii.
(14 marks)