You are on page 1of 2

Long Range Guided Wave Ultrasonic

Inspection System [1]

An advanced technology for detecting and analysing


corrosion where access is difficult
BENEFITS
Low cost screening with 100% coverage
Focussing capability to evaluate corrosion distribution
around pipe circumference
Typical test range 60m from single location, ideal
conditions can achieve 350m.
Testing of pipes up to 48 diameter
Proven capability on pipe in service up to 125 oC
Reliable detection of 9% metal loss flaws
Ideal where conventional testing is impossible or very
costly e.g. clamped, insulated, elevated, sleeved or
buried pipes.
PROCESS
Low frequency ultrasound is transmitted and
received from a single location
The guided waves used travel long distances, even
in buried, submerged or insulated pipe
Response from flaws is a function of their depth and
circumferential extent
Focussing allows ultrasound energy to be concentrated into a small region of pipe for detailed localised
inspection
Teletest uses multi-mode technology to characterise
and quantify any flaw detected
A laptop PC runs dedicated Teletest data acquisition
and analysis software. The flaw detector communicates
with the PC via a high-speed data link
The test equipment is built up in modules to fit ASME
pipe sizes

100%


60
350
48

125

9





ASME

....For all your inspection needs....


Dacon Inspection Services Co.,Ltd.

www.dacon-inspection.com info@dacon-inspection.com
78/4 Moo 6, Ban Chang, Rayong, 21130, Thailand Tel. +66 38 880788 Fax. +66 38 880727
Please consider the environment before printing this document

Long Range Guided Wave Ultrasonic


Inspection System [2]

APPLICATIONS
Pipe types
Seamless
Longitudinally and spiral welded

Pipe materials
Ferritic and stainless steels
Other metals

Pipe situations
Buried
Air-to-soil interface
Air-to-water interface
Elevated on racks
Sleeved in road crossings
Wall, bund or berm penetrations

Flaws found
External corrosion
Corrosion under insulation (CUI)
Internal corrosion or erosion
Environmental cracking

Pipe coatings etc.


Foam or mineral wool
PVC, epoxy, coal tar epoxy
Paint
Bitumastic wrapping

Pipe duties
Transmission and distribution lines
Refinery and chemical plant
Offshore risers
Jetty lines
Tank farm link lines
Power plant service pipe
Storage sphere support legs
Headers

....For all your inspection needs....


Dacon Inspection Services Co.,Ltd.

www.dacon-inspection.com info@dacon-inspection.com
78/4 Moo 6, Ban Chang, Rayong, 21130, Thailand Tel. +66 38 880788 Fax. +66 38 880727
Please consider the environment before printing this document

You might also like

  • UT Pig
    UT Pig
    Document2 pages
    UT Pig
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • UT Pig
    UT Pig
    Document2 pages
    UT Pig
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • VI
    VI
    Document1 page
    VI
    Kmt_Ae
    No ratings yet
  • Surface Roughness Testing
    Surface Roughness Testing
    Document1 page
    Surface Roughness Testing
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • RVI DMC Dia 35mm - Length 30meter
    RVI DMC Dia 35mm - Length 30meter
    Document2 pages
    RVI DMC Dia 35mm - Length 30meter
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • RFT
    RFT
    Document1 page
    RFT
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • B Scan
    B Scan
    Document1 page
    B Scan
    Mohammed Ilyas Mohiuddin
    No ratings yet
  • Api 653
    Api 653
    Document1 page
    Api 653
    Mohammed Ilyas Mohiuddin
    100% (1)