1-A two-dimensional unsteady flow has the velocity components:
Find the equation of the streamlines of this flow which pass through the point (x0, y0,) at time t = 0.
2-The clutch system shown in Figure is used to transmit torque through a 3-mm- thick oil film with =0.38 N.s/m 2 between two identical 30-cm-diameter disks. When the driving shaft rotates at a speed of 1450 rpm, the driven shaft is observed to rotate at 1398 rpm. Assuming a linear velocity profile for the oil film, determine the transmit
3-The viscosity of a fluid is to be measured by a viscometer Constructed of two 75- cm-long concentric cylinders. The outer diameter of the inner cylinder is 15 cm, and the gap between the two cylinders is 0.12 cm. The inner cylinder is rotated at 200 rpm, and the torque is measured to be 0.8 N.m. Determine the viscosity of the fluid.