The document describes optional features for HV induction motors including:
- Sensors that can be added like stator and bearing temperature sensors.
- An auxiliary control box that can accommodate additional sensors and has an IP66 degree of protection rating.
- Bearing dial thermometers that have a measuring range of 0-120°C and a display temperature rating of -40-60°C.
The document describes optional features for HV induction motors including:
- Sensors that can be added like stator and bearing temperature sensors.
- An auxiliary control box that can accommodate additional sensors and has an IP66 degree of protection rating.
- Bearing dial thermometers that have a measuring range of 0-120°C and a display temperature rating of -40-60°C.
The document describes optional features for HV induction motors including:
- Sensors that can be added like stator and bearing temperature sensors.
- An auxiliary control box that can accommodate additional sensors and has an IP66 degree of protection rating.
- Bearing dial thermometers that have a measuring range of 0-120°C and a display temperature rating of -40-60°C.
14 HV induction motors, technical catalog for IEC motors EN 09-2011 | BU Motors and Generators | ABB
one box as default
stator Pt-100 (6 pcs) bearing Pt-100 (optional, variant code 107) heating element (optional, variant code 450/451) dial type thermometers for bearings (optional, variant code 651/652)* Pt-100 (12 pcs) inside stator slots (optional, variant code 653)* Provision for vibration sensors (optional, variant code 654)* * The bigger auxiliary box is needed if any of these variant codes is selected. Option with bearing dial type thermometers Measuring range 0120 C Degree of protection : IP65 (IEC529) Temperature durability of display -40+60 C M 0 0 0 3 5 8 M 0 0 0 3 5 7 Other features: equipped with assembly rail ARH 22 (DIN-35) main dimensions 125x222x81, 222x330x180 degree of protection IP66 (IEC 529) gasket material polyurethane temperature resistance -50 - +140C (material), +80 C (continuous use) weight 1.6 5.6 kg Specification: Material designation Al-Si10Mg (pressure die cast) Material standard EN 573-3 Surface treatment RAL 7001 (grey) Temperature durability of capillary tube -40+100 C With or without contacts (optional, variant codes 652/651) M 0 0 0 3 5 6 M 0 0 0 3 5 5