15 minutes presentation and 10 minutes Q and a, total 25 minutes. The target is to impress during the 15 minutes allocated to you and pray for the best for the next 10 minutes.
15 minutes presentation and 10 minutes Q and a, total 25 minutes. The target is to impress during the 15 minutes allocated to you and pray for the best for the next 10 minutes.
15 minutes presentation and 10 minutes Q and a, total 25 minutes. The target is to impress during the 15 minutes allocated to you and pray for the best for the next 10 minutes.
15 minutes presentation and 10 minutes Q and A, total 25 minutes.
1. Title and your name 2. Content page 3. Scope 4. Gantt Chart 5. Introduction Background of the problem Current method Problem identification Design specs, including constraints 6. Proposed solutions Concepts 1, 2, and explanation Concepts should be varied and cover solution possibilities, not just hydraulics or gears only, try linkages, pulleys, etc. 7. Criteria for evaluation For each component, explanation and justification of marks distribution 8. Final selected mechanism. 9. Gantt chart for 2 nd semester. Never promise what you cannot deliver. 10. TQ and Q and A
1. Should prepare about 30 slides. 2. Should have a rough (justified) knowledge of important facts, such as size, load to support, etc. 3. Try to present diagrams, photos of current methods. 4. If you are confident, put it on the slide, if not, just mention orally. People tend to read slides. 5. Prepare extra slides which you do not present. When someone ask, then show the slide, theyll be impressed. It shows that you do your work. Even if the question is not directly related to the prepared slides, try to squeeze it in and it is going to buy some timehe he.
The target is to impress during the 15 minutes allocated to you and pray for the best for the next 10 minutes