Professional Documents
Culture Documents
Machine Design Paper Bharat
Machine Design Paper Bharat
(3 MARKS)
Q7.A line shaft is driven by means of a motor placed vertically below it.the pulley on line shaft
is 1.5 m in diameter and has belt tension 5.4KN and 1.8 KN on tight side and slack side of belt
respectively. both these tensions may be assumed to be vertical. if the pulley be overhung from
the shaft, the distance of centre line of pulley from centre line of bearing being 400mm ,find the
diameter of shaft. Assuming max. Allowable shear stress of 42 MPa (3 MARKS)
BHARAT SINGH YADAV/MD/MECH/6/EVENING/60 COPIES REQUIRED