P-47D Thunderbolt placards s. adh.

32 611
1/32 scale detail set for TRUMPETER kit sada detail pro model 1/32 TRUMPETER
ORIGINAL KIT PARTS
PVODN DLY STAVEBNICE
PHOTO-ETCHED PARTS
LEPTAN DLY
PARTS TO BE REMOVED
DLY K ODSTRANN
FILL
TMELIT
eduard
REMOVE
ODSTRANIT
OPTION
VOLBA
?
REPLACE
NAHRADIT
BEND
OHNOUT
GRIND
OBROUSIT
SYMETRICAL ASSEMBLY
SYMETRICK MONT
DRILL HOLE
VRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUING
POUT EXPRESS MASK NABARVIT PED SLEPENM
1/3 32 611
3
30
20
10
22
9
1
12
2
N41
N42
N32
17
21
23
24
25
N23
19
4
28
6
7
8
18
16
plastic
1,5x2,0mm
2/3 32 611
EDUARD M.A. 2008 Made in Czech Republic www.eduard.com
11
B1 B7
N3 N4
27
N6 N5
15
26
26
29
5
S7
REFERENCES:
P-47 Thunderbolt in action....Suadron / Signal Publications aircraft # 67
Republic P-47 Thunderbolt in action....Modelpres # 1
Aero Detail # 14
14
D24
13
D23
2. Do not inadvertently place etched componets on an
unwanted surface. Attempts to remove will result in
damage to your part.
2. Nepokldejte samolepc dly na voln plochy. Pokud
je omylem pilepte, pi pokusu o odlepen dojde k
pokozen dlu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na sti dl, na kterch je naneseno lepidlo.
1. Separate the etched components from their frames on the
protective paper. Removal from the paper is done only after
separation of the parts from the frames.
1.Samolepc dly oddlujte od rmeku na podkladovm
pape. Po oddlen je sejmte z krycho papru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepc dly berte za hrany nebo za sti, na kterch
nen nanesen lepidlo.
5. Lightly place the component in the desired location and
position. Adjust as required. The component will by
permanently affixed when pressed onto its intended
location, its location can be adjusted.
5. Dl lehce polote do pozice, ve kter m bt nalepen.
Upravte pesnou pozici a pimknte. Dl dokonale pilne
a po pimknut, ped pimknutm lze dlem opatrn
manipulovat.
3/3 32 611
1/32 scale detail set for TRUMPETER kit sada detail pro model 1/ TRUMPETER 32
P-47D Thunderbolt placards