Professional Documents
Culture Documents
colours by blue
light the hand light unit PhotoPolyStation XS
suitable for single pieces as well as the light box
PhotoPolyStation XL for an even and complete
hardening of several pieces are available.
33
Colour in perfection
From The Yellow Cow to
Monochrome Blue: art means
colour and with brilliant
colour effects and really sim-
ple application, Novorit Pure
Color will change your design
into art in a flash.
As an innovative composite
material with a ceramic share
of more than 50%, Novorit
Simple application
Novorit Pure Color is delivered in handy application
cartridges allowing particularly precise and economi-
cal working. The material is protected against
contamination. Air pockets are considerably reduced.
The cartridge can be completely emptied. The Novorit
Link for chemical bond of the colours with the metal
is simply applied with a crayon, too. This way, even
fastidious designs are just a piece of cake.
CreaStation 120
With CreaStation 120 you will obtain perfect depth hardening
of your colours. The design allows both simultaneous
handling of more than one piece and absolute homogeneous
hardening of greater depths: at compact measures of
200 x 290 x 330 mm, the pressure-heat-furnace offers a large
polymerisation space with a capacity of 1.7 l, pressure up to
4.2 bar, and an operation temperature of 120C. You will
receive surfaces which are free of bubbles, extremely resist-
ant to scratches, shock and wear, and ready for easy and
safe further handling.
Pure Color fascinates with high purity and surface
quality. Even thin layers, which you may mix
individually and can handle and apply most easily,
result in highly covering colour shades. The material
is hardened through pressure-heat-processes and is
as perfectly suited for creative use in studios and
manufactures as for industrial applications.
Take advantage of our
expertise and our compre-
hensive range of services:
Determination of
Precious metal
Trace analysis of metals
Full analysis of alloys
Waste water analysis in
accordance with Appendix
40 of the German Water
Management Act (WHG)
Analysis of electroplating
baths
Materials testing
and much more ...
34
Analysis and materials testing
Mechanical Vickers hardness test
testing of materials Tensile test
Erichsen cupping test
Thermal analysis Determination of the melting range by means of differential thermal
analysis (DTA)
Measurements with the dilatometer
Metallographic analysis Evaluation of structure
Measurement of layer thicknesses
Digital photography and preparation of reports
Thermal treatment Ageing, hardening, oxidation
Tarnishing and corrosion testing
Docimasy O.K. of alloys and sweeps
ICPOES analysis Analysis of alloy elements, waste water and impurities
Flame AAS Single-element analysis of alloys and baths
IC (ion chromotography) Determination of non-metals (anions)
X-ray fluorescence spectroscopy Measurement of the thickness of electroplating layers
General analysis of alloys
Chemical analysis Electrogravimetric analysis; potentiometric and manual titration;
density analysis, gravimetric determination of the composition of
electroplating baths
35
Machinery and equipment for precious metal recovery
ELECTROCLAIM
Electrolytic recovery of
precious metals
This system is eminently
suitable for the recovery of
medium and high precious
metal concentrations in
rinses, spent electroplating
baths and stripper solutions.
Up to 1500 g of gold can
be deposited on the three
special cathodes in the
units electrolytic cell.
These high deposition
rates are due to the highly
efficient current flow in
the recovery cell and to
Heimerle + Meules special
cathodes. These features
The components of the
Electroclaim unit rectifier,
pump and recovery cell
fit neatly into the compact
housing, and the instruments
and switches are ergo-
nomically arranged on the
console. Thanks to its self-
suction pump and the easily
removable special cathodes,
Electroclaim is particularly
user-friendly. The subsequent
recovery of the pure precious
metal from the special cath-
odes is carried out profes-
sionally and economically at
our own refinery.
with the resin beads and to
empty it later, which was an
awkward and time-consum-
ing task. With the BES system
you just change the bags.
The resin in the bag is spe-
cially adapted to one type of
precious metal. This maxi-
mises the working capacity
of each bag. Bags are avail-
able with special resins
for gold, silver, palladium,
ruthenium and iridium.
IONOCLAIM
Precious metal recovery by
ion exchange
This is an extremely efficient
procedure for the recovery of
low and medium precious
metal concentrations in spent
precious metal baths, static
and running precious metal
drag-out rinses and precious
metal stripper solutions.
The recovery unit Ionoclaim
can handle precious metals
in the form of cyanide, chlor-
ide or sulphate compounds.
Thanks to Heimerle + Meules
flexible Bag Exchange
System (BES), Ionoclaim
offers considerable advan-
tages in terms of handling
and logistics. It is no longer
necessary to fill the bag
Electroclaim Ionoclaim
Ref. No. 8621 2 001 Ref. No. 8100 9 768
complete with:
recovery cell in PP
3 special foam cathodes
4 anodes
self-suction pump 16 l/h
flow meter
rectifier 6 V/ 20 Amp.
complete with:
2 filter housings
centrifugal pump
flow meter
plastic pipes
2 bags incl. filling
ensure that even low pre-
cious metal concentrations
can recovered almost to the
last milligram.
36
RHODOCLAIM
Precious metal recovery by
means of chemical reaction
The Rhodoclaim system
developed by Heimerle +
Meule has revolutionized the
recovery of rhodium from
spent rhodium-bearing baths
and rinses. In the past, rho-
dium recovery could only be
carried out at the refinery
with all the expense, time and
effort the transport entailed.
Rhodoclaim has changed all
that. It is a user-friendly and
extremely profitable system
which allows you to recover
the precious metal yourself.
It even makes it possible to
recover rhodium from sol-
utions that have previously
not been recycled at all. By
doing so you reduce pollution
and benefit financially.
How the system works:
Rhodium forms a compound
with the newly-developed
Rhodoclaim powder which
means that you simply add
the powder to the spent sol-
ution after adjusting the
pH value an extremely
simple procedure.
Rhodoclaim system 8101 0 144
includes:
500 or 1000 grams of
Rhodoclaim powder
Folded filters
Measuring spoon
PH paper
Illustrated instructions
for use
Shipping container for extract
Pre-refining precious metal
analysis
Professional refining of the
rhodium
There is a charge of 1 1.50 for every
gram of reclaimed rhodium
After filtration and drying you
send the rhodium-bearing
extract to Heimerle + Meule.
In this form, the consignment
doesnt even have to be
classified as hazardous.
The Rhodoclaim system sol-
ution also includes analysis,
professional processing and
the recovery of the rhodium
in our own refinery. In
exchange for the rhodium
extract you send us, you
receive the proceeds of the
recovered rhodium in the
form of a financial settlement,
rhodium baths or other
Heimerle + Meule precious
metal products. If you wish,
we can open a free precious
metal account for you.
Under ideal conditions*
a 500 litre spent bath with
a rhodium content of only
0.1 grams per litre can yield
a rate of return of up to
200 %. In the case of a higher
rhodium content, your rate
of return can increase to
over 800 %.
* i.e. a low level of contami-
nation of the bath and
provided that the instruc-
tions for use are followed
correctly.
37
Cathode bearing
precious metal
Cathode ready
for use
Bag filled with
precious metal
Empty bag
Precious
metal recovery
Recovered
precious metals
Ion exchange
Spent precious
metal baths;
static and
running precious
metal drag-out rinses
Electrolysis
ELECTROCLAI M
I ONOCLAI M
Filter containing
rhodium
RHODOCLAI M
Heimerle + Meules
system solutions
for efficient precious
metal recovery
Your precious metal cycle with Heimerle + Meule
Heimerle+Meule develops
and manufactures machinery,
equipment and chemicals for
the on-site recovery by our
customers of precious metals
from drag-out rinses, spent
electroplating baths and di-
luted stripper solutions.
These products contribute
greatly to the rationalization
of the treatment processes
and pay for themselves
within a very short time.
Our Electroclaim, Ionoclaim
and Rhodoclaim system sol-
utions facilitate the efficient
on-site recovery of precious
metals from precious metal
bearing solutions. The pre-
cious metal concentrates
obtained in this way can then
be professionally refined at
our plant. The option of
exchanging the precious
metal yield for precious metal
solutions and/or other pre-
cious metal products from
Heimerle+Meule completes
the precious metal cycle for
our customers.
This precious metal cycle,
with its short routes, minimum
precious metal wastage and
reduced precious metal stor-
age requirements, makes our
customers purchasing and
production processes con-
siderably more costeffective.
0
6
.
0
7
/
1
.
5
Quality management
Quality assurance and
certified reliability
With a quality management
system certified in accord-
ance with DIN EN ISO 9001,
Heimerle+Meule has a
worldwide reputation for
high standards of quality
and expertise. Moreover, our
company is a certified waste
management facility and
a specialist firm as defined
in 19i of the German Water
Management Act. Our Medi-
cal Products Division is
also certified in accordance
with DIN EN ISO 13485
and Annexes II and VI of
EU Directive 93/42/ EEC.
As part of our certified quality
management system, all
Heimerle+Meule products
are tested and analysed in
our own laboratories accord-
ing to a range of criteria.
A member of the POSSEHL Group
Heimerle+Meule GmbH
Gold and Silver Refinery
Dennigstr. 16 75179 Pforzheim Germany
Fon: +49 (0) 7231 940-0 Fax: +49 (0) 7231 940-199
E-Mail info@heimerle-meule.com
www.heimerle-meule.com
Your direct line for:
Analysis and materials testing Fon: +49 (0) 7231 940-2116
Precious metal semi-finished products Fon: +49 (0) 7231 940-2193
(Profile) ring blanks Fon: +49 (0) 7231 940-2158
Electroplating job shop Fon: +49 (0) 7231 940-2543
Precious metal recycling and trading Fon: +49 (0) 7231 940-2516
Electroplating chemicals and machinery Fon: +49 (0) 7231 940-2575