Professional Documents
Culture Documents
description
These devices contain six independent inverters.
SN5404 . . . J PACKAGE
SN54LS04, SN54S04 . . . J OR W PACKAGE
SN7404 . . . D, N, OR NS PACKAGE
SN74LS04 . . . D, DB, N, OR NS PACKAGE
SN74S04 . . . D OR N PACKAGE
(TOP VIEW)
1A
1Y
2A
2Y
3A
3Y
GND
13
VCC
6A
6Y
5A
5Y
4A
4Y
14
12
11
10
SN5404 . . . W PACKAGE
(TOP VIEW)
1A
2Y
2A
14
13
12
VCC
3A
3Y
4A
11
10
1Y
6A
6Y
GND
5Y
5A
4Y
1Y
1A
NC
VCC
6A
3 2 1 20 19
18
17
16
15
14
9 10 11 12 13
6Y
NC
5A
NC
5Y
3Y
GND
NC
4Y
4A
2A
NC
2Y
NC
3A
NC No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
ORDERING INFORMATION
ORDERABLE
PART NUMBER
PACKAGE
TA
TOP-SIDE
MARKING
Tube
SN74S04D
SN74S04DR
SN7404NSR
SN7404
SN74LS04NSR
74LS04
SN74LS04DBR
LS04
SN5404J
SN5404J
SNJ5404J
SNJ5404J
Tube
SN54LS04J
SN54LS04J
Tube
SN54S04J
SN54S04J
SNJ54LS04J
SNJ54LS04J
Tube
SNJ54S04J
SNJ54S04J
Tube
SNJ5404W
SNJ5404W
Tube
SNJ54LS04W
SNJ54LS04W
Tube
LCCC FK
SN74LS04DR
Tube
CFP W
SN74LS04D
Tube
55C to 125C
7404
Tube
CDIP J
SN74S04N
SN7404D
SSOP DB
SN74LS04N
SN74S04N
Tube
SOP NS
SN74LS04N
Tube
SOIC D
Tube
Tube
0C to 70C
SN7404N
Tube
PDIP N
SN7404N
SNJ54S04W
SNJ54S04W
Tube
SNJ54LS04FK
SNJ54LS04FK
Tube
SNJ54S04FK
LS04
S04
SNJ54S04FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
FUNCTION TABLE
(each inverter)
INPUT
A
H
OUTPUT
Y
1Y
2A
2Y
3A
3Y
4A
4Y
5A
5Y
6A
6Y
Y=A
4 k
130
1.6 k
Input A
Output Y
1 k
GND
LS04
S04
VCC
20 k
120
8 k
Input
A
VCC
4 k
2.8 k
Output
Y
50
900
Input
A
3.5 k
Output
Y
12 k
500
250
3 k
1.5 k
GND
GND
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI: 04, S04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
LS04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Package thermal impedance, JA (see Note 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86C/W
DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65C to 150C
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. This are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network ground terminal.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
SN5404
MIN
Supply voltage
VIL
IOH
MIN
NOM
MAX
5.5
4.75
5.25
IOL
TA
MAX
4.5
VCC
VIH
NOM
UNIT
V
V
0.8
0.4
0.8
0.4
mA
16
mA
70
16
55
125
TEST CONDITIONS
PARAMETER
VIK
VOH
VCC = MIN,
VCC = MIN,
II = 12 mA
VIL = 0.8 V,
VOL
II
VCC = MIN,
VCC = MAX,
VIH = 2 V,
VI = 5.5 V
IIH
IIL
VCC = MAX,
VCC = MAX,
VI = 2.4 V
VI = 0.4 V
IOS
ICCH
VCC = MAX
VCC = MAX,
MAX
SN7404
MIN TYP
1.5
IOH = 0.4 mA
IOL = 16 mA
2.4
3.4
0.2
MAX
1.5
2.4
0.4
3.4
0.2
UNIT
V
V
0.4
1
V
mA
40
20
40
1.6
1.6
mA
55
mA
12
mA
ICCL
VCC = MAX,
18
33
18
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25C.
Not more than one output should be shorted at a time.
33
mA
VI = 0 V
VI = 4.5 V
55
6
18
12
FROM
(INPUT)
TO
(OUTPUT)
SN5404
SN7404
TEST CONDITIONS
MIN
RL = 400
,
CL = 15 pF
F
UNIT
TYP
MAX
12
22
15
ns
SN54LS04
MIN
Supply voltage
VIL
IOH
MIN
NOM
MAX
5.5
4.75
5.25
IOL
TA
MAX
4.5
VCC
VIH
NOM
UNIT
V
V
0.7
0.4
0.8
0.4
mA
mA
70
55
125
VIK
VOH
SN54LS04
MIN TYP
MAX
TEST CONDITIONS
PARAMETER
VCC = MIN,
VCC = MIN,
II = 18 mA
VIL = MAX,
VOL
VCC = MIN
MIN,
VCC = MAX,
VCC = MAX,
VCC = MAX,
VCC = MAX
VCC = MAX,
VCC = MAX,
3.4
0.25
VI = 0.4 V
ICCH
ICCL
2.5
VI = 7 V
VI = 2.7 V
IIL
IOS
1.5
IOH = 0.4 mA
IOL = 4 mA
VIH = 2 V
II
IIH
SN74LS04
MIN TYP
MAX
VI = 0 V
VI = 4.5 V
1.5
2.7
3.4
0.4
0.25
V
V
0.4
IOL = 8 mA
UNIT
0.5
0.1
0.1
mA
20
20
0.4
20
100
0.4
mA
100
20
mA
1.2
2.4
1.2
2.4
mA
3.6
6.6
3.6
6.6
mA
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25C.
Not more than one output should be shorted at a time and the duration of the short-circuit should not exceed one second.
FROM
(INPUT)
TO
(OUTPUT)
TEST CONDITIONS
SN54LS04
SN74LS04
MIN
RL = 2 k
k,
CL = 15 pF
F
UNIT
TYP
MAX
15
10
15
ns
SN54S04
MIN
NOM
MAX
MIN
NOM
MAX
4.5
5.5
4.75
5.25
UNIT
VCC
VIH
Supply voltage
VIL
IOH
0.8
0.8
mA
IOL
TA
20
mA
70
20
55
125
TEST CONDITIONS
PARAMETER
VIK
VOH
VCC = MIN,
VCC = MIN,
II = 18 mA
VIL = 0.8 V,
VOL
II
VCC = MIN,
VCC = MAX,
VIH = 2 V,
VI = 5.5 V
IIH
IIL
VCC = MAX,
VCC = MAX,
VI = 2.7 V
VI = 0.5 V
IOS
ICCH
VCC = MAX
VCC = MAX,
SN74S04
MIN TYP
MAX
1.2
IOH = 1 mA
IOL = 20 mA
2.5
3.4
1.2
2.7
3.4
UNIT
V
V
0.5
0.5
V
mA
50
40
50
mA
100
mA
15
24
mA
ICCL
VCC = MAX,
30
54
30
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25C.
Not more than one output should be shorted at a time and the duration of the short-circuit should not exceed one second.
54
mA
VI = 0 V
VI = 4.5 V
100
15
40
24
TO
(OUTPUT)
tPLH
tPHL
RL = 280
,
CL = 15 pF
F
tPLH
tPHL
RL = 280
,
CL = 50 pF
F
PARAMETER
SN54S04
SN74S04
TEST CONDITIONS
MIN
UNIT
TYP
MAX
4.5
4.5
5
ns
ns
VCC
RL
(see Note B)
From Output
Under Test
CL
(see Note A)
High-Level
Pulse
1.5 V
S2
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3V
Timing
Input
1.5 V
1 k
Test
Point
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
S1
(see Note B)
CL
(see Note A)
RL
CL
(see Note A)
RL
From Output
Under Test
VCC
From Output
Under Test
Test
Point
1.5 V
0V
tw
Low-Level
Pulse
1.5 V
tsu
Data
Input
1.5 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
1.5 V
1.5 V
In-Phase
Output
(see Note D)
tPHL
VOH
1.5 V
Out-of-Phase
Output
(see Note D)
0V
1.5 V
1.5 V
Waveform 1
(see Notes C
and D)
tPLZ
VOH
1.5 V
1.5 V
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
1.5 V
1.5 V
VOL
tPZH
tPLH
1.5 V
0V
tPZL
VOL
tPHL
1.5 V
3V
Output
Control
(low-level
enabling)
0V
tPLH
3V
1.5 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3V
Input
th
Waveform 2
(see Notes C
and D)
VOL + 0.5 V
tPHZ
VOH
1.5 V
VOH 0.5 V
1.5 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
VCC
RL
From Output
Under Test
CL
(see Note A)
CL
(see Note A)
High-Level
Pulse
1.3 V
S2
LOAD CIRCUIT
FOR 3-STATE OUTPUTS
3V
Timing
Input
1.3 V
5 k
Test
Point
LOAD CIRCUIT
FOR OPEN-COLLECTOR OUTPUTS
LOAD CIRCUIT
FOR 2-STATE TOTEM-POLE OUTPUTS
S1
(see Note B)
CL
(see Note A)
RL
(see Note B)
RL
From Output
Under Test
VCC
From Output
Under Test
Test
Point
1.3 V
0V
tw
Low-Level
Pulse
1.3 V
tsu
0V
In-Phase
Output
(see Note D)
3V
1.3 V
1.3 V
0V
tPZL
tPLZ
tPHL
VOH
1.3 V
1.3 V
Waveform 1
(see Notes C
and D)
VOL
tPZH
tPLH
VOH
1.3 V
1.3 V
VOL
Waveform 2
(see Notes C
and D)
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
1.5 V
1.3 V
VOL
tPHL
Out-of-Phase
Output
(see Note D)
1.3 V
0V
Output
Control
(low-level
enabling)
1.3 V
tPLH
1.3 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3V
1.3 V
3V
Data
Input
1.3 V
VOLTAGE WAVEFORMS
PULSE DURATIONS
Input
th
VOL + 0.5 V
tPHZ
VOH
1.3 V
VOH 0.5 V
1.5 V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES, 3-STATE OUTPUTS
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TIs terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TIs standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding thirdparty products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265