USERGUIDE TTL-RS232 CONVERTER USER GUIDE Elementz Engineers Guild Pvt Ltd Ayurveda College Trivandrum-695001 Phone 0471-6006699 Mob +91-9020616699 REVISION HISTORY VERSION 1 JULY 2013 Table of Contents Overview ................................................................................. 1 Features .................................................................................. 2 Module SnapShot ........................................................................... 2 Connection Details ................................................................... 2 How to connect with a PC............................................................... 2 How to get data in PC .............................................................. 3 Troubleshooting ....................................................................... 3 More tools you may require...................................................... 4 Index ........................................................................................ 4 U S E R G U I D E V E R 1 1 Overview he TTL-RS232 converter is a handy module using MAX232 IC which enables the user to communicate between TTL and RS232 levels. This module is used for communication between 5V TTL levels and upto +/-30V RS232 level. For interfacing with lower TTL levels, suitable level translators should be used. Features Supply- 5 volts TX-RX TTL i/o pins can be directly connected to Microcontroller or other TTL output modules. e.g. RFID Reader, GPS, GSM Modem DB9 connector used for communication with PC through serial port. Module Snapshot Following figure contains the Snapshot of the TTL-RS232 Adapter board along with USB to Serial. Connection Details How to connect with a PC The following diagram shows the interface between the TTL-RS232 converter and PC. Users may require USB to Serial converter if serial port is absent. T N O T E P I C T U R E 2 How toget data in PC Connect the TTL-RS232 converter to PC module using the diagram shown in the above section. Open any terminal emulation software. Eg. Hyperterminal(Windows)/ Minicom(Linux) Select the correct communication port in the Configuration window. Use preferred Baudrate, 8-bit, No parity, 1-Stopbit and Open the port. Troubleshooting Use any preferred terminal software to open the serial port of PC with the above settings. Electrically short TTL level RX and TX pin after applying power to the module. Type into the terminal application and see the typed characters which are echoed back. More tools you may require 1. Users may use our USB-Serial converter used to connect with Laptops and PCs without serial ports. B L O C K D I A G R A M This section explains how to connect TTL- RS232 converter to PC Addit ional t ools that may be required 3 Index