You are on page 1of 8

RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,




5). **************************ADD AISG***************************************

RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,





RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,









RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,





Copy this three row and paste it into the AISG DEVICE of 411 file, and change parameter as illustrated in above
fig.

RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,





RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,





>>>After adding AISG successfully Synchronize
Modified table then After Five Minutes only starts to
add tilt
Dear All,

There is slight change in the way to configure AISG in R8881 S2100. Please follow the following steps.

1. After RRU is up with RET cable installed properly.

Change the Switch Status from 0 to 1 in PowerOutletDeviceSet Tab.
RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,





There is slight change in the way to configure AISG in R8881 S2100. Please follow the following steps.

1. After RRU is up with RET cable installed properly.




5).*******************************ADDING
_TILT**********************************************

2. Query the AISG device and follow the same steps to configure as for R8840


RET Configuration guide Internal Use Only

Madhunath Yadav
BSS Engineer, EDR
ZTE NEPAL Pvt. Ltd,






THE END

You might also like