You are on page 1of 1

HOW TO HANDLE EPSON T0491, 6 COLOUR SET

The feature of this cartridge is Multiple IC chip and plug attached. Easy to refill
many times, and easy to see ink level in this Skelton cartridge.
Can't use as a single compatible cartridge or an original cartridge even it is refilled,
also can't mix with an original cartridge, use this cartridge as a set.


How to set your cartridge

1. Remove yellow seal from air hole of each cartridge. (ref Pic 1)

2. Take out the old cartridge, and then properly insert a new cartridge into a printer.
Make sure to change all cartridges at once.

3. Run a print test; just follow the printing instruction if any problem occurs.










(Pic 1) (Pic 2)

How to refill Ink

1. Remove the empty cartridge from a printer.

2. Remove the colour plug from filling hole located on top of a cartridge.

3. Fill the ink slowly with ink77 Australia into the filling hole until it is full.
Make sure to refill correct ink colour in a cartridge. (ref Pic 2)

4. Reinsert the small colour plug into the filling hole by gently pushing and twisting
at the same time.

5. The cartridge is now filled and ready to use.

When the cartridge is removed and reinserted into the printer, the chip will be
Reset to full.


Caution should be taken to refill before Ink level become low inside a small round
Part of the ink tank. Otherwise, ink does not flow at all.


Ink77.com.au pdf-E001v1

You might also like