Professional Documents
Culture Documents
Tamaño de Cañerias
Tamaño de Cañerias
2007
11:53 Uhr
Seite 1
Julius-Saxler-Strae 7
DE-54550 Daun(Germany
www.tpsd.de
service@tpsd.de
TPS Technitube Rhrenwerke GmbH Tube & Pipe Sizes - 5th Edition
www.tpsd.de
30.11.2007
11:53 Uhr
Seite 2
Notes
Summary
4-69
4-14
15-18
19
20-21
22
23
24
25
26
27
28-31
32-33
34-35
36-37
38-39
40-44
45
46-47
48-50
51 -62
63
64-68
69
Technifin Types
Technistud
Nonferrous
112-141
112 - 115
116 - 119
120 - 124
125 - 126
127
128 - 130
Copper
Brass
Aluminium
Bronze
Bushings
Coppernickel and Brass
Piping System
131 - 137
Brazing Fittings
138 - 141, 177, 182 Unions
142-247
143, 172-173, 174,
176, 178, 179
144-146, 156-158
147
148-149, 159-165
150-152, 166-170,
180, 181
153, 171
154
155
175, 190, 191,
194-247
183
184-185
186
187
188
189
192-193
248-274
248-271
Manufacturing Programme
Valves
Oil Country Tubular Goods
(OCTG)
272-274
275-303
Conversion
Tables &
Glossary
275-287
288-303
Conversion Tables
Glossary
Hinweis:
Die Angaben in diesem Katalog sind nur zur allgemeinen
Information. TPS gibt keine Garantie fr die Vollstndigkeit und
Richtigkeit der Informationen, die in diesem Katalog enthalten
sind. TPS bernimmt keine Haftung fr die Verwendung der
Angaben.
Remark:
The material contained in this catalogue is for general information
only. TPS issues no guarantee for completeness and accuracy of
statement. TPS assumes no liability for the use of the provided
information.
12/2007
30.11.2007
10:04 Uhr
Seite 3
Introduction
30.11.2007
10:04 Uhr
Seite 4
Outside
Diameter
in.
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
in.
mm
1/8
0,405
10,30
0,068
0,095
1,7
2,4
0,24
0,31
0,357
0,461
5L
5L
STD
XS
40
80
1/4
0,540
13,70
0,088
0,119
2,2
3,0
0,42
0,54
0,625
0,804
5L
5L
STD
XS
40
80
3/8
0,675
17,10
0,091
0,126
2,3
3,2
0,57
0,74
0,848
1,10
5L
5L
STD
XS
40
80
1/2
0,840
21,30
0,109
0,147
0,188
0,294
2,8
3,7
4,8
7,5
0,85
1,09
1,31
1,71
1,26
1,62
1,95
2,54
5L
5L
5L
5L
STD
XS
40
80
160
0,113
0,154
0,219
0,308
2,9
3,9
5,6
7,8
1,13
1,47
1,94
2,44
1,68
2,19
2,88
3,63
5L
5L
5L
5L
STD
XS
0,133
0,179
0,250
0,358
3,4
4,5
6,4
9,1
1,68
2,17
2,84
3,66
2,50
3,23
4,23
5,45
5L
5L
5L
5L
STD
XS
0,140
0,191
0,250
0,382
3,6
4,9
6,4
9,7
2,27
3,00
3,76
5,21
3,38
4,46
5,60
7,75
5L
5L
5L
5L
STD
XS
0,145
0,200
0,281
0,400
3,7
5,1
7,1
10,2
2,72
3,63
4,86
6,41
4,05
5,40
7,23
9,54
5L
5L
5L
5L
STD
XS
0,083
0,109
0,126
0,141
0,154
0,172
0,188
0,218
0,250
0,281
0,344
0,436
2,1
2,8
3,2
3,6
3,9
4,4
4,8
5,5
6,4
7,1
8,7
11,1
2,03
2,64
3,00
3,36
3,65
4,05
4,39
5,02
5,67
6,28
7,46
9,03
3,02
3,93
4,47
5,00
5,44
6,03
6,54
7,48
8,45
9,35
11,10
13,40
3/4
1,050
1,315
1 1/4
1,660
1 1/2
1,900
2,375
26,70
33,40
42,20
48,30
60,30
kg/m
API
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
STD
XS; XXS
Schedule
No
XXS
40
80
160
XXS
40
80
160
XXS
40
80
160
XXS
40
80
160
XXS
STD
40
XS
80
160
5L, 5LX
XXS
30.11.2007
10:04 Uhr
Seite 5
in.
2 1/2
3 1/2
in.
mm
2,875
73,00
3,500
4,5
88,90
101,60
114,30
Wall
Thickness
in.
mm
Weight
Identification
ln/ft
kg/m
API
0,083
0,109
0,125
0,141
0,156
0,172
0,188
0,203
0,216
0,250
0,276
0,375
0,552
2,1
2,8
3,2
3,6
4,0
4,4
4,8
5,2
5,5
6,4
7,0
9,5
14,0
2,47
3,22
3,67
4,12
4,53
4,97
5,40
5,79
6,13
7,01
7,66
10,00
13,70
3,68
4,80
5,46
6,12
6,75
7,40
8,04
8,62
9,13
10,40
11,40
14,90
20,40
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
0,083
0,109
0,125
0,141
0,156
0,172
0,188
0,216
0,250
0,281
0,300
0,438
0,600
2,1
2,8
3,2
3,6
4,0
4,4
4,8
5,5
6,4
7,1
7,6
11,1
15,2
3,03
3,95
4,57
5,06
5,57
6,11
6,65
7,58
8,68
9,66
10,30
14,30
18,60
4,51
5,88
6,72
7,54
8,30
9,10
9,91
11,3
12,9
14,4
15,3
21,3
27,7
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
0,083
0,109
0,125
0,141
0,156
0,172
0,188
0,226
0,250
0,281
0,318
2,1
2,8
3,2
3,6
4,0
4,4
4,8
5,7
6,4
7,1
8,1
3,47
4,53
5,17
5,81
6,40
7,03
7,65
9,11
10,00
11,20
12,50
5,17
6,75
7,70
8,65
9,53
10,5
11,4
13,6
14,9
16,6
18,6
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
5L, 5LX
0,083
0,109
0,125
0,141
0,156
0,172
0,188
0,203
0,219
0,237
0,250
0,281
0,312
0,337
0,438
0,531
0,674
2,1
2,8
3,2
3,6
4,0
4,4
4,8
5,2
5,6
6,0
6,4
7,1
7,9
8,6
11,1
13,5
17,1
3,92
5,11
5,84
6,56
7,24
7,95
8,66
9,32
10,00
10,80
11,40
12,70
14,00
15,00
19,00
22,50
27,50
5,84
7,61
8,70
9,77
10,8
11,8
12,9
13,9
14,9
16,1
16,9
18,9
20,8
22,3
28,3
33,5
41,0
5L, 5LX
5L, 5LX
STD
XS; XXS
Schedule
No
STD
XS
80
160
XXS
STD
40
XS
80
160
XXS
STD
40
XS
80
STD
40
XS
80
120
160
XXS
Size
30.11.2007
10:04 Uhr
Seite 6
Outside
Diameter
in.
in.
5,563
6,625
8,625
mm
141,30
168,30
219,10
Wall
Thickness
in.
mm
Weight
Identification
ln/ft
kg/m
API
0,083
0,125
0,156
0,188
0,219
0,258
0,281
0,312
0,344
0,375
0,500
0,625
0,750
2,1
3,2
4,0
4,8
5,6
6,6
7,1
7,9
8,7
9,5
12,7
15,9
19,0
4,86
7,26
9,01
10,80
12,50
14,60
15,80
17,50
19,20
20,80
27,00
33,00
38,60
7,24
10,8
13,4
16,1
18,6
21,8
23,6
26,1
28,6
31,0
40,3
49,1
57,4
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L, 5LS
5L
5L, 5LS
5L, 5LS
5L
0,083
0,109
0,125
0,141
0,156
0,172
0,188
0,203
0,219
0,250
0,280
0,312
0,344
0,375
0,432
0,500
0,562
0,625
0,719
0,864
2,1
2,8
3,2
3,6
4,0
4,4
4,8
5,2
5,6
6,4
7,1
7,9
8,7
9,5
11,0
12,7
14,3
15,9
18,3
21,9
5,80
7,59
8,68
9,76
10,80
11,80
12,90
13,90
15,00
17,0
19,0
21,0
23,1
25,0
28,6
32,7
36,4
40,0
45,4
53,2
8,64
11,3
12,0
14,5
16,1
17,6
19,2
20,7
22,3
25,4
28,3
31,3
34,4
37,3
42,6
48,7
54,2
59,6
67,6
79,2
0,125
0,156
0,188
0,203
0,219
0,250
0,277
0,312
0,322
0,344
0,375
0,406
0,438
0,500
0,562
0,594
0,625
0,719
0,812
0,875
0,906
3,2
4,0
4,8
5,2
5,6
6,4
7,0
7,9
8,2
8,7
9,5
10,3
11,1
12,7
14,3
15,1
15,9
18,3
20,6
22,6
23,0
11,4
14,1
16,9
18,3
19,7
22,4
24,7
27,7
28,6
30,4
33,0
35,7
38,3
43,4
48,4
50,9
53,4
60,7
67,8
72,4
74,4
19,9
21,0
25,2
27,3
29,3
33,3
36,8
41,3
42,5
45,3
49,2
53,1
57,0
64,6
72,1
75,8
79,5
90,4
101,0
108,0
111,0
STD
XS; XXS
Schedule
No
STD
40
XS
80
120
160
XXS
STD
40
XS
80
120
160
XXS
20
30
STD
40
60
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
XS
80
100
120
140
XXS
160
30.11.2007
10:04 Uhr
Seite 7
in.
in.
10
10,750
12
14
12,750
14,000
mm
2730
323,80
355,60
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,156
0,188
0,203
0,219
0,250
0,279
0,307
0,344
0,365
0,438
0,500
0,562
0,594
0,625
0,719
0,812
0,844
1,000
1,125
4,0
4,8
5,2
5,6
6,4
7,1
7,8
8,7
9,3
11,1
12,7
14,3
15,1
15,9
18,3
20,6
21,4
25,4
28,6
17,6
21,2
22,9
24,6
28,0
31,2
34,2
38,2
40,5
48,2
54,7
61,2
64,4
67,7
77,0
86,2
89,3
104,1
115,6
26,3
31,6
34,1
36,7
41,8
46,5
51,0
56,9
60,3
71,8
81,5
91,1
95,8
101,0
115,0
128,0
133,0
155,0
172,0
0,172
0,188
0,203
0,219
0,250
0,281
0,312
0,330
0,344
0,375
0,406
0,438
0,500
0,562
0,625
0,688
0,750
0,812
0,844
0,875
1,000
1,125
1,312
4,4
4,8
5,2
5,6
6,4
7,1
7,9
8,4
8,7
9,5
10,3
11,1
12,7
14,3
15,9
17,5
19,0
20,6
21,4
22,2
25,4
28,6
33,3
23,1
25,2
27,2
29,3
33,4
37,4
41,4
43,8
45,6
49,6
53,5
57,6
65,4
73,1
80,9
88,6
96,1
104
107
111
125
140
160
34,4
37,6
40,5
43,7
49,7
55,7
61,7
65,2
67,9
73,8
79,7
85,8
97,4
109,0
121,0
132,0
143,0
154
160
165
187
208
239
0,188
0,203
0,210
0,219
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
4,8
5,2
5,3
5,6
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
27,7
29,9
30,9
32,2
36,7
41,2
45,6
50,2
54,6
58,9
63,4
67,8
72,1
41,3
44,6
46,1
48,0
54,7
61,3
67,9
74,7
81,3
87,8
94,5
101
107
STD
XS; XXS
Schedule
No
20
30
STD
40
XS
60
80
100
XXS
120
140
160
20
30
STD
40
XS
60
80
100
5L, 5LS, 5LX
XXS
120
140
160
10
20
STD
30
40
XS
Size
30.11.2007
10:04 Uhr
Seite 8
Outside
Diameter
in.
in.
16
16,000
18
18,000
mm
406,40
457,20
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,562
0,594
0,625
0,688
0,750
0,812
0,875
0,938
1,094
1,250
1,406
2,000
2,125
2,200
2,500
14,3
15,1
15,9
17,5
19,0
20,6
22,2
23,8
27,8
31,8
35,7
50,8
54,0
55,9
63,5
80,7
85,0
89,3
97,8
106
114
123
131
151
170
189
256
270
277
307
120
127
133
146
158
170
183
195
224
253
281
381
401
413
457
0,188
0,203
0,219
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,656
0,688
0,750
0,812
0,844
0,875
0,938
1,000
1,031
1,062
1,125
1,219
1,438
1,594
4,8
5,2
5,6
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,0
16,7
17,5
19,0
20,6
21,4
22,2
23,8
25,4
26,2
26,9
28,6
31,0
36,5
40,5
31,8
34,2
36,9
42,0
47,2
52,3
57,7
62,6
67,6
72,8
77,8
82,8
92,7
103
108
113
122
132
137
141
151
160
165
169
179
192
224
245
47,3
51,0
55,0
62,6
70,3
77,9
85,7
93,2
101
108
116
123
138
153
160
168
182
196
203
211
225
239
245
253
266
286
333
365
0,188
0,219
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
4,8
5,6
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
35,8
41,6
47,4
53,2
58,9
64,9
70,6
76,3
82,2
87,8
93,4
105
53,3
62,0
70,6
79,2
87,8
96,6
105
114
122
131
139
156
STD
XS; XXS
Schedule
No
80
100
120
140
160
10
20
STD
30
XS
40
60
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
80
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
100
5L, 5LS, 5LX
5L, 5LS, 5LX
120
140
160
10
20
STD
30
XS
40
30.11.2007
10:04 Uhr
Seite 9
20
22
in.
20,000
22,000
mm
508,00
558,80
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,625
0,688
0,750
0,812
0,875
0,938
1,000
1,062
1,125
1,156
1,187
1,250
1,375
1,562
1,781
15,9
17,5
19,0
20,6
22,2
23,8
25,4
27,0
28,6
29,4
30,8
31,8
34,9
39,7
45,2
116
127
138
149
160
171
182
192
203
208
213
224
244
274
309
173
189
206
222
238
255
270
286
302
310
317
333
363
408
459
0,219
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,594
0,625
0,688
0,750
0,812
0,875
0,938
1,000
1,031
1,062
1,125
1,187
1,250
1,281
1,312
1,375
1,500
1,750
1,969
5,6
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,1
15,9
17,5
19,0
20,6
22,2
23,8
25,4
26,2
27,0
28,6
30,2
31,8
32,5
33,3
34,9
38,1
44,4
50,0
46,3
52,7
59,2
65,6
72,2
78,6
85,0
91,5
97,8
104
117
123
129
142
154
166
179
191
203
209
215
227
238
250
256
262
274
296
341
379
68,9
78,5
88,2
97,7
108
117
127
136
146
155
174
183
193
211
230
248
266
284
302
311
320
338
355
372
381
390
407
441
508
564
0,219
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
5,6
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
50,9
58,1
65,2
72,3
79,6
86,6
93,6
101
108
115
129
143
157
75,9
86,5
97,1
108
118
129
139
150
161
171
192
213
233
STD
XS; XXS
Schedule
No
60
80
100
5L, 5LS, 5LX
5L, 5LS, 5LX
120
140
160
10
STD
20
XS
30
40
60
80
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
100
5L, 5LS, 5LX
5L, 5LS, 5LX
120
140
160
10
STD
20
XS
30
in.
Outside
Diameter
30.11.2007
10:04 Uhr
Seite 10
24
26
10
Outside
Diameter
in.
24,000
26,000
mm
609,60
660,40
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,750
0,812
0,875
0,938
1,000
1,062
1,125
1,187
1,250
1,312
1,375
1,437
1,500
1,625
1,875
2,125
19,0
20,6
22,2
23,8
25,4
27,0
28,6
30,2
31,8
33,3
34,9
36,5
38,1
41,3
47,6
54,0
170
184
197
211
224
237
251
264
277
290
303
316
328
354
403
451
254
274
294
314
334
354
374
393
413
432
451
470
489
526
600
671
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
0,969
1,000
1,062
1,125
1,187
1,219
1,250
1,312
1,375
1,437
1,500
1,531
1,562
1,812
2,062
2,344
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
24,6
25,4
27,0
28,6
30,2
31,0
31,8
33,3
34,9
36,5
38,1
38,9
39,7
46,0
52,4
59,5
63,4
71,2
78,9
86,9
94,6
102
110
118
125
141
156
171
186
201
216
231
238
246
260
275
289
297
304
318
332
346
360
367
374
430
483
542
94,4
106
118
129
141
152
164
176
187
210
232
255
277
300
322
344
355
366
342
409
431
441
452
474
495
516
537
547
558
639
719
807
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
68,8
77,2
85,6
94,3
103
111
120
128
136
153
102
115
128
140
153
165
178
190
203
227
STD
XS; XXS
Schedule
No
60
80
100
120
140
160
10
STD
20
XS
30
40
60
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
80
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
5L, 5LS, 5LX
100
5L, 5LS, 5LX
120
140
160
10
STD
XS
20
30.11.2007
10:04 Uhr
Seite 11
28
30
32
in.
28,000
30,000
32,000
mm
711,20
762
812,80
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,625
0,688
0,750
0,812
0,875
0,938
1,000
15,9
17,5
19,0
20,6
22,2
23,8
25,4
169
186
202
218
235
251
267
252
277
301
325
350
374
398
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
74,1
83,2
92,3
102
111
120
129
138
147
165
183
201
218
236
253
271
288
110
124
137
151
165
178
192
205
219
245
272
299
325
351
378
404
430
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
79,4
89,2
98,9
109
119
128
138
148
158
177
196
215
234
253
272
291
310
118
133
147
162
177
191
206
220
235
263
292
321
349
377
405
434
461
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
84,8
95,2
106
116
127
137
148
158
168
189
209
230
250
270
291
311
331
126
142
157
173
189
204
220
235
251
281
312
343
373
403
433
463
493
STD
XS; XXS
Schedule
No
10
STD
XS
20
30
10
STD
XS
20
30
10
STD
XS
20
30
40
11
in.
Outside
Diameter
30.11.2007
10:04 Uhr
Seite 12
Outside
Diameter
in.
in.
34
34,000
36
36,000
38
38,000
40
40,000
12
mm
863,60
914,40
965,20
1016
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
90,1
101
112
124
135
146
157
168
179
201
223
245
266
288
310
331
134
151
167
184
201
217
234
250
266
299
332
365
397
429
461
493
1,000
0,250
0,281
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
25,4
6,4
7,1
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
352
95,4
107
119
131
143
154
166
178
190
213
236
259
282
305
328
351
374
525
142
160
177
195
213
230
248
265
282
317
352
386
421
455
489
523
557
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
126
138
151
163
176
188
200
225
249
274
298
322
347
371
395
187
206
224
243
262
280
298
335
372
408
444
480
517
553
589
0,312
0,344
0,375
0,406
0,438
0,469
0,500
0,562
7,9
8,7
9,5
10,3
11,1
11,9
12,7
14,3
132
146
159
172
185
198
211
237
197
217
236
256
276
295
314
353
STD
XS; XXS
Schedule
No
10
STD
XS
20
30
40
10
STD
XS
20
30
40
30.11.2007
10:04 Uhr
Seite 13
in.
42
Outside
Diameter
in.
mm
Wall
Thickness
in.
mm
Weight
ln/ft
Identification
kg/m
API
0,625
0,688
0,050
0,812
0,875
0,938
1,000
15,9
17,5
19,0
20,6
22,2
23,8
25,4
263
289
314
340
366
391
417
391
430
468
506
545
583
620
42,000
1066,80
0,344
0,375
0,406
0,438
0,460
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
153
167
180
194
208
222
249
276
304
330
357
384
411
438
228
248
269
290
310
330
370
411
452
492
532
572
615
652
44
44,000
1117,60
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
160
175
189
204
218
232
261
290
318
346
375
403
431
474
239
260
282
304
325
346
388
431
474
516
558
600
643
684
46
46,000
1168,40
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
168
183
198
213
228
243
273
303
333
362
392
422
451
481
250
272
294
317
340
362
406
451
496
540
584
628
602
716
STD
XS; XXS
Schedule
No
13
Size
30.11.2007
10:04 Uhr
Seite 14
Outside
Diameter
in.
in.
48
48,000
14
mm
1219,20
Wall
Thickness
in.
mm
0,344
0,375
0,406
0,438
0,469
0,500
0,562
0,625
0,688
0,750
0,812
0,875
0,938
1,000
8,7
9,5
10,3
11,1
11,9
12,7
14,3
15,9
17,5
19,0
20,6
22,2
23,8
25,4
Weight
ln/ft
175
191
206
222
238
254
285
316
348
378
409
440
471
502
Identification
kg/m
261
284
307
331
355
378
424
471
518
564
610
656
702
748
API
STD
XS; XXS
Schedule
No
30.11.2007
10:04 Uhr
Seite 15
Pipes
Dimensions and weights - ASTM
NB
Outside Diameter
1/8"
1/4"
3/8"
0.405
0.540
0.675
mm
10,3
13,7
17,1
In.
mm
Weight
lb/ft
Designation
STD/XS/XXS
Schedule
Nos1
NB
kg/m
In.
0.049
0.068
0.095
1,24
1,73
2,41
0,19
0.24
0.31
0,28
0,36
0,46
STD
XS
10S
40(S)
80(S)
0.065
0.088
0.119
1,65
2,24
3,02
0.33
0.42
0.54
0,49
0,63
0,80
STD
XS
10S
40(S)
80(S)
0.065
0.091
0.126
1,65
2,31
3,20
0.42
0.57
0.74
0,63
0,85
1,10
STD
XS
10S
40(S)
80(S)
5"
1/2"
3/4"
0.840
1.050
21,3
26,7
0.065
0.083
0.109
0.147
0.188
0.294
1,65
2,11
2,77
3,73
4,78
7,47
0.54
0.67
0.85
1.09
1.31
1.71
0,80
1,00
1,26
1,62
1,95
2,54
STD
XS
0.065
0.083
0.113
0.154
0.219
0.308
1,65
2,11
2,87
3,91
5,56
7,82
0.69
0.86
1.13
1.47
1.94
2.44
1,03
1,28
1,68
2,19
2,89
3,63
STD
XS
1.315
1 1/4" 1.660
33,4
0.065
0.109
0.133
0.179
0.250
0.358
1,65
2,77
3,38
4,55
6,35
9,09
0.87
1.40
1.68
2.17
2.84
3.66
1,29
2,08
2,50
3,23
4,23
5,45
STD
XS
42,2
0.065
0.109
0.140
0.191
0.250
0.382
1,65
2,77
3,56
4,85
6,35
9,70
1.11
1.81
2.27
3.00
3.76
5.21
1,65
2,69
3,38
4,46
5,60
7,75
STD
XS
2"
2.375
2 1/2" 2.875
3"
3.500
3 1/2" 4.000
4"
4.500
48,3
0.065
0.109
0.145
0.200
0.281
0.400
1,65
2,77
3,68
5,08
7,14
10,20
1.28
2.09
2.72
3.63
4.86
6.41
1,90
3,12
4,05
5,40
7,23
9,54
STD
XS
60,3
0.065
0.109
0.154
0.218
0.344
0.436
1,65
2,77
3,91
5,54
8,74
11,10
1.61
2.64
3.65
5.02
7.46
9.03
2,38
3,94
5,43
7,47
11,10
13,40
STD
XS
73,0
0.083
0.120
0.203
0.276
0.375
0.552
2,11
3,05
5,16
7,01
9,52
14,00
2.48
3.53
5.79
7.66
10.01
13.70
3,71
5,26
8,62
11,40
14,90
20,40
STD
XS
88,9
0.083
0.120
0.125
0.156
0.188
0.216
0.250
0.281
0.300
0.438
0.600
2,11
3,05
3,18
3,96
4,78
5,49
6,35
7,14
7,62
11,10
15,20
3.03
4.33
4.51
5.58
6.63
7.58
8.68
9.67
10.25
14.31
18.58
4,50
6,45
6,71
8,30
9,87
11,30
12,90
14,40
15,30
21,30
27,70
101,6
0.083
0.120
0.125
0.156
0.188
0.226
0.250
0.281
0.318
2,11
3,05
3,18
3,96
4,78
5,74
6,35
7,14
8,08
3.48
4.97
5.17
6.41
7.63
9.11
10.01
11.17
12.51
5,20
7,40
7,69
9,54
11,40
13,60
14,90
16,60
18,60
114,3
0.083
0.120
0.125
0,156
2,11
3,05
3,18
3,96
3.92
5.61
5.84
7.25
5,81
8,34
8,69
10,80
141,3
XXS
5S
10S
40(S)
80(S)
160
Weight
Wall Thickness
In.
mm
lb/ft
Designation
STD/XS/XXS
Schedule
Nos1
kg/m
0.188
0.219
0.237
0.250
0.281
0.312
0.337
0.438
0.531
0.674
4,78
5,56
6,02
6,35
7,14
7,92
8,56
11,10
13,50
17,10
8.64
10.00
10.79
11.35
12.67
13.98
14.98
18.98
22.52
27.54
12,90
14,90
16,10
16,90
18,90
20,80
22,30
28,20
33,50
41,00
0.109
0.134
0.156
0.188
0.219
0.258
0.281
0.312
0.344
0.375
0.500
0.625
0.750
2,77
3,40
3,96
4,78
5,56
6,55
7,14
7,92
8,74
9,52
12,70
15,90
19,10
6.36
7.77
9.02
10.76
12.49
14.62
15.87
17.52
19.16
20.78
27.40
32.96
38.55
9,45
11,60
13,40
16,00
18,60
21,80
23,60
26,10
28,50
30,90
40,20
49,00
57,40
0.109
0.134
0.188
0.219
0.250
0.280
0.312
0.344
0.375
0.432
0.562
0.719
0.864
2,77
3,40
4,78
5,56
6,35
7,11
7,92
8,74
9,52
11,00
14,30
18,30
21,90
7.60
9.29
12.89
14.97
17.02
18.97
21.07
23.06
25.03
28.57
36.42
45.34
53.16
11,30
13,80
19,20
22,30
25,30
28,20
31,40
34,30
37,20
42,50
54,20
67,50
79,10
0.109
0.148
0.188
0.203
0.219
0.250
0.277
0.312
0.322
0.344
0.375
0.406
0.438
0.500
0.594
0.719
0.812
0.875
0.906
2,77
3,76
4,78
5,16
5,56
6,35
7,04
7,92
8,18
8,74
9,52
10,30
11,10
12,70
15,10
18,30
20,60
22,20
23,00
9.93
13.40
16.90
18.27
19.64
22.36
24.70
27.74
28.55
30.40
33.04
35.66
38.26
43.39
50.93
60.69
67.79
72.42
74.71
14,80
19,90
25,10
27,20
29,20
33,30
36,80
41,30
42,50
45,20
49,20
53,10
56,90
64,60
75,80
90,30
101,00
108,00
111,00
0.134
0.165
0.188
0.203
0.219
0.250
0.279
0.307
0.344
0.365
0.438
0.500
0.594
0.719
0.844
1.000
1.125
3,40
4,19
4,78
5,16
5,56
6,35
7,09
7,80
8,74
9,27
11,10
12,70
15,10
18,30
21,40
25,40
28,60
15.23
18.70
21.15
22.88
24.60
28.04
31.20
34.24
38.20
40.48
48.19
54.74
64.40
77.00
89.27
104.13
115.65
22,60
27,80
31,50
34,00
36,60
41,70
46,40
51,00
56,80
60,20
71,70
81,50
95,80
115,00
133,00
155,00
172,00
0.156
0.180
0.203
0.219
0.250
0.281
0.312
0.330
3,96
4,57
5,16
5,56
6,35
7,14
7,92
8,38
22.22
24.20
27.22
29.28
33.38
37.45
41.51
43.77
33,00
36,00
40,50
43,60
49,70
55,70
61,80
65,10
STD
40(S)
XS
80(S)
120
160
XXS
5S
10S
STD
40S
XS
80S
120
160
XXS
XXS
6.625
168,3
5S
10S
40(S)
80(S)
160
XXS
5S
10S
40(S)
80(S)
160
5S
10S
STD
40(S)
XS
80(S)
120
160
XXS
XXS
8"
1 1/2" 1.900
5.563
mm
5S
10S
40(S)
80(S)
160
6"
1"
Outside Diameter
8.625
219,1
5S
10S
40(S)
80(S)
160
XXS
5S
10S
40(S)
80(S)
160
XXS
5S
10S
40(S)
80(S)
160
10"
XXS
10.750
273,0
5S
10S
STD
XS
40(S)
80(S)
160
XXS
5S
10S
12"
STD
40(S)
XS
80(S)
5S
10S
12.750
323,9
5S
10S
20
30
STD
40(S)
XS
80(S)
100
120
140
60
XXS
160
5S
10S
20
30
STD
XS
XXS
40(S)
60/80S
80
100
120
140
160
5S
10S
20
30
15
In.
Wall Thickness
30.11.2007
10:04 Uhr
Seite 16
Pipes
Dimensions and weights - ASTM
NB
Outside Diameter
In.
12 12.750
14 14.000
16 16.000
mm
323,9
355,6
406,4
0.250
18 18.000
20 20.000
16
457,2
508,0
Wall Thickness
In.
mm
Weight
lb/ft
Designation
STD/XS/XXS
Schedule
Nos1
kg/m
0.344
0.375
0.406
0.438
0.500
0.562
0.688
0.844
1.000
1.125
1.312
8,74
9,52
10,30
11,10
12,70
14,30
17,50
21,40
25,40
28,60
33,30
45.55
49.56
53.56
57.53
65.42
73.22
88.57
107.29
125.49
139.68
160.33
67,80
73,80
79,70
85,60
97,40
109,00
132,00
160,00
187,00
208,00
239,00
0.156
0.188
0.210
0.219
0.250
0.281
0.312
0.344
0.375
0.438
0.469
0.500
0.594
0.750
0.938
1.094
1.250
1.406
2.000
2.125
2.200
2.500
3,96
4,78
5,33
5,56
6,35
7,14
7,92
8,74
9,52
11,10
11,90
12,70
15,10
19,10
23,80
27,80
31,80
35,70
50,80
54,00
55,90
63,50
23.07
27.73
30.93
32.20
36.71
41.21
45.68
50.14
54.57
63.37
67.78
72.09
85.01
106.13
130.79
150.76
170.22
189.15
256.32
269.51
277.26
307.05
34,20
41,20
46,00
47,90
54,60
61,30
68,00
74,60
81,20
94,30
101,00
107,00
127,00
158,00
195,00
224,00
253,00
281,00
381,00
401,00
413,00
457,00
0.165
0.188
0.219
6,35
0.281
0.312
0.344
0.375
0.438
0.469
0.500
0.656
0.844
1.031
1.219
1.438
1.594
4,19
4,78
5,56
42.05
7,14
7,92
8,74
9,52
11,10
11,90
12,70
16,70
21,40
26,20
31,00
36,50
40,50
27.90
31.75
36.87
62,60
47.22
52.36
57.84
62.58
72.72
77.75
82.77
107.54
136.58
164.86
192.40
223.57
245.22
41,60
47,30
54,90
70,30
77,90
85,50
93,10
108,00
116,00
123,00
160,00
203,00
245,00
286,00
333,00
365,00
0.165
0.188
0.250
0.281
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.750
0.938
1.156
1.375
1.562
1.781
4,19
4,78
6,35
7,14
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
19,10
23,80
29,40
34,90
39,70
45,20
31.43
35.77
47.39
53.22
59.03
64.82
70.59
76.34
82.06
87.77
93.45
104.76
138.17
170.84
208.00
244.14
274.30
308.55
46,80
53,20
70,50
79,20
87,80
96,50
105,00
114,00
122,00
131,00
139,00
156,00
206,00
254,00
310,00
363,00
408,00
459,00
0.188
0.218
0.250
0.281
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.594
0.812
1.031
4,78
5,54
6,35
7,14
7,92
8,74
9,52
10,30
11,10
11,90
12,70
15,10
20,60
26,20
39.78
46.06
52.73
59.23
65.71
72.16
78.60
85.01
91.41
97.78
104.13
123.06
166.50
208.92
52,20
68,50
78,50
88,10
97,80
107,00
117,00
127,00
136,00
146,00
155,00
183,00
248,00
311,00
NB
Outside Diameter
In.
STD
40 S
40
XS
80 S
60
80
100
120
140
160
XXS
22 22.000
mm
558,8
5S
10 S
10
20
STD
30/40 S
40
XS
80 S
60
80
100
120
140
160
24 24.000
609,6
5S
10 S
10
20
STD
660,4
40/80 S
60
80
100
120
140
160
5S
10 S
10
20
STD
40 S
28 28.000
711,2
30
XS
80 S
40
60
80
100
120
140
160
5S
10 S
10
STD
XS
In.
mm
Weight
lb/ft
Designation
STD/XS/XXS
Schedule
Nos1
kg/m
1.281
1.500
1.750
1.969
32,50
38,10
44,50
50,00
256.15
296.37
341.10
379.14
381,00
441,00
508,00
564,00
100
120
140
160
0.188
0.218
0.250
0.281
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.625
0.875
1.125
1.375
1.625
1.875
2.125
4,78
5,54
6,35
7,14
7,92
8,74
9,52
10,30
11,10
11,90
12,70
15,90
22,20
28,60
34,90
41,30
47,60
54,00
43.80
50.72
58.07
65.24
72.38
79.51
86.61
93.69
100.75
105.79
114.81
142.68
197.42
250.82
302.88
353.61
403.01
451.07
65,20
75,40
86,40
97,10
108,00
118,00
129,00
139,00
150,00
160,00
171,00
212,00
294,00
373,00
451,00
526,00
600,00
671,00
5S
10 S
10
0.218
0.250
0.281
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.688
0.969
1.219
1.531
1.812
2.062
2.344
5,54
6,35
7,14
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
17,50
24,60
31,00
38,90
46,00
52,40
59,50
55.38
63.41
71.25
79.06
86.85
94.62
102.37
110.10
117.81
125.49
140.80
171.17
238.29
296.53
367.45
429.50
483.24
542.09
82,60
94,40
106,00
118,00
129,00
141,00
152,00
164,00
175,00
187,00
210,00
255,00
355,00
441,00
547,00
639,00
719,00
807,00
0.250
0.281
0.312
0.344
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
6,35
7,14
7,92
8,74
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
68.75
77.18
85.60
94.26
102.63
119.57
136.17
152.68
169.38
185.99
202.25
218.43
234.79
251.07
267.00
102,40
114,96
127,50
140,40
152,87
178,10
202,83
227,42
252,29
277,03
301,25
325,35
349,72
373,97
397,70
0.250
0.281
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
6,35
7,14
7,92
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
74.09
83.19
92.26
110.64
128.93
146.85
164.69
182.73
200.68
218.27
235.78
253.48
271.10
288.36
110,36
123,91
137,42
164,80
192,04
218,73
245,31
272,18
298,91
325,11
351,19
377,56
403,80
429,51
0.250
0.281
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
6,35
7,14
7,92
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
79.43
89.19
98.93
118.65
138.29
157.53
176.69
196.08
215.38
234.29
253.12
272.17
118,31
132,85
147,36
176,73
205,98
234,64
263,18
292,06
320,81
348,97
377,02
405,40
STD
20/40 S
XS
30/80 S
40
60
80
100
120
140
160
5S
30/80 S
STD
20/40 S
XS
80 S
30
40
60
80
100
120
140
160
30/40 S
26 26.000
XS
Wall Thickness
20/40 S
30/80 S
40
60
80
30 30.000
762,0
10
STD
XS
20
10
STD
XS
20
30
10
STD
XS
20
30
30.11.2007
10:04 Uhr
Seite 17
Pipes
Dimensions and weights - ASTM
NB
Outside Diameter
mm
Wall Thickness
In.
mm
Weight
lb/ft
Designation
STD/XS/XXS
Schedule
Nos1
kg/m
30 30.000
762,0
0.938
1.000
23,83 291.14
25,40 309.72
433,65
461,33
32 32.000
812,8
0.250
0.281
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
6,53
7,14
7,92
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
84.77
95.19
105.59
126.66
147.64
168.21
188.70
209.43
230.08
250.31
270.47
290.86
311.17
331.08
126,26
141,79
157,28
188,66
219,91
250,55
281,07
311,95
342,70
372,84
402,87
433,24
463,49
493,14
0.250
0.281
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
6,35
7,14
7,92
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
90.11
101.19
112.25
134.67
157-00
178.89
200.70
222.78
244.77
266.33
287.81
309.55
331.21
352.44
134,22
150,72
167,20
200,59
233,85
266,46
298,94
331,83
364,58
396,77
428,69
461,07
493,34
524,96
0.250
0.281
0.312
0.375
0.438
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
6,35
7,14
7,92
9,52
11,13
12,70
14,27
15,88
17,48
19,05
20,62
22,22
22,83
25,40
7,92
8,74
9,52
10,31
11,13
11,91
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
95.45
107.20
118.92
142.88
166.35
189.57
212.70
236.13
259.47
282.35
305.16
328.24
351.25
373.80
125.58
138.35
150.69
163.01
175.71
187.99
200.25
224.71
249.48
274.16
298.37
322.50
346.93
371.28
395.16
142,17
159,67
117,13
212,52
247,78
282,36
316,82
351,72
386,48
420,56
454,54
488,91
523,19
556,78
187,05
206,07
224,45
242,80
261,72
280,01
298,27
334,71
371,60
408,36
444,42
480,36
516,75
553,02
588,59
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
7,92
8,74
9,52
10,31
11,13
11,91
12,70
14,27
15,88
17,48
19,05
20,62
22,22
23,83
25,40
132.25
145.69
158.70
171.68
185.06
198.01
210.93
236,17
262.83
288.86
314.39
339.84
368.62
391.32
416.52
196,99
217,01
236,68
255,72
275,66
294,94
314,18
352,58
391,49
430,26
468,28
506,19
544,59
582,87
620,41
0.344
0.375
0.406
0.438
0.469
0.500
8,74
9,52
10,31
11,13
11,91
12,70
153.04
166.71
180.35
194.42
208.03
221.61
227,95
248,31
268,63
289,59
309,86
330,09
NB
Outside Diameter
In.
mm
863,6
38 38.000
914,4
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
17,48
0.750
0.812
0.875
0.938
1.000
8,74
9,52
10,31
11,13
11,91
12,70
14,27
15,88
318.25
19,05
20,62
22,22
23,83
25,40
160.39
174.72
189.03
203.78
218.04
232.29
260.72
289.53
474,03
346.43
374.53
403.00
431.39
459.24
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
17,48
0.750
0.812
0.875
0.938
1.000
8,74
9.52
10,31
11,13
11,91
12,70
14,27
15,88
332.95
19,05
20,62
22,22
23,83
25,40
167.74
182.73
197.70
213.13
228.06
242.97
272.73
302.88
495,93
362.45
391.88
421.69
451.42
480.60
249,85
272,18
294,47
317,46
339,70
361,90
406,23
451,14
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.750
0.812
0.875
0.938
1.000
8,74
9,52
10,31
11,13
11,91
12,70
14,27
15,88
19,05
20,62
22,22
23,83
25,40
175.08
190.74
206.37
222.49
238.08
253.65
284.73
316.23
378.47
409.22
440.38
471.46
501.96
260,75
284,11
307,39
331,40
354,62
377,81
424,11
471,02
563,73
609,53
655,95
702,24
747,67
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
166.00
183.00
199.00
215.00
232.00
248.00
265.00
298.00
331.00
364.00
398.00
524.00
247,00
272,00
296,00
320,00
345,00
369,00
394,00
443,00
492,00
541,00
565,00
780,00
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
172.00
190.00
207.00
224.00
241.00
258.00
276.00
310.00
345.00
378.00
412.00
545.00
256,00
283,00
308,00
333,00
359,00
384,00
410,00
461,00
513,00
562,00
613,00
811,00
0.312
0.344
0.375
0.406
0.438
0.469
7,92
8,74
9,52
10,30
11,10
11,90
185.00
205.00
223.00
241.00
259.00
278.00
276,00
305,00
332,00
359,00
386,00
414,00
1117,6
30
40
10
STD
965,2
46 46.000 1168,4
40 40.000 1016,0
42 42.000 1066,8
10
STD
STD
XS
516,01
557,86
600,27
642,56
648,04
STD
XS
539,87
583,71
628,11
672,39
715.85
20
48 48.000 1219,2
30
40
STD
XS
Schedule
Nos1
20
30
40
XS
Designation
STD/XS/XXS
kg/m
20
0.688
36 36.000
Weight
lb/ft
44 44.000
10
XS
mm
0.562
0.625
0.688
0.750
0.812
0.875
0.938
1.000
0.688
34 34.000
In.
42 42.000 1066,8
STD
XS
Wall Thickness
In.
50 50.000 1270,0
STD
XS
STD
XS
STD
52 52.000 1320,0
XS
56 56.000 1422.4
STD
XS
STD
XS
STD
17
30.11.2007
10:04 Uhr
Seite 18
Pipes
Dimensions and weights - ASTM
NB
Outside Diameter
In.
mm
Wall Thickness
In.
mm
Weight
lb/ft
Designation
STD/XS/XXS
56 56.000 1422,4
0.500
0.562
0.625
0.688
0.750
1.000
12,70
14,30
15,90
17,50
19,10
25,40
297.00
333.00
371.00
407.00
444.00
588.00
442,00
496,00
552,00
606,00
661,00
875,00
60 60.000 1524,0
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
199.00
220.00
239.00
259.00
278.00
298.00
318.00
358.00
397.00
437.00
476.00
631.00
296,00
327,00
356,00
385,00
414,00
444,00
473,00
532,00
591,00
650,00
709,00
939,00
0.312
0.344
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
7,92
8,74
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
212.00 316,00
234.00 348,00
255.00 380,00
276.00 410,00
297.00 442,00
319.00 474,00
339.00 505,00
382.00 568,00
424.00 631,00
466.00 694,00
509.00 757,00
674.00 1002,00
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
287.00 427,00
310.00 462,00
335.00 498,00
358.00 533,00
382.00 569,00
430.00 640,00
478.00 711,00
526.00 782,00
573.00 852,00
759.00 1130,00
STD
0.375
0.406
0.438
0.469
0.500
0.562
0.625
0.688
0.750
1.000
9,52
10,30
11,10
11,90
12,70
14,30
15,90
17,50
19,10
25,40
319.00 475,00
345.00 514,00
372.00 553,00
398.00 593,00
425.00 632,00
478.00 711,00
532.00 791,00
585.00 870,00
637.00 948,00
845.00 1257,00
STD
0.469
0.500
0.562
0.625
0.688
0.750
1.000
11,90
12,70
14,30
15,90
17,50
19,10
25,40
439.00 653,00
468.00 696,00
526.00 783,00
585.00 870,00
643.00 957,00
702.00 1044,00
930.00 1384,00
0.469
0.500
0.562
0.625
0.688
0.750
1.000
64 64.000 1625,6
72 72.000 1828,8
80 80.000 2032,0
88 88.000 2235,2
100
18
100.000 2540,0
Schedule
Nos1
kg/m
XS
STD
XS
STD
XS
XS
XS
XS
XS
1,8
1,8
1,8
2
2
2
2
2
2
2
2
2
2
2,3
2,3
2,3
2,3
2,3
2,6
2,6
2,6
2,9
2,9
2,9
3,2
3,2
3,2
3,6
3,6
4
4
4
4
4,5
4,5
4,5
4,5
5
5
5
5,6
5,6
5,6
5,6
5,6
6,3
6,3
6,3
6,3
6,3
6,3
6,3
6,3
7,
7,1
8
8
8,8
10
10 248
21,3
25
26,9
30
31,8
33,7
38
42,4
44,5
48,3
51
57
60,3
63,5
70
76,1
82,5
88,9
101,6
108
114,3
(121)
127
133
139,7
152,4
159
165,1
168,3
177,8
193,7
(216)
291,1
244,5
267
273
298,5
(318)
323,9
355,6
368
406,4
419
157,2
(470)
508
(521)
558,8
609,6
660,4
711,2
762
812,8
863,6
914,4
1016
124
148
158
185
223
78,2
80,0
86,1
94,1
115
49,9
62,4
64,3
70,3
72,0
33,0
40,3
43,1
43,8
48,2
20,9
23,5
23,7
29,5
32,3
14,7
15,4
16,0
16,3
19,2
8,83
9,30
9,84
11,6
12,2
11
11,5
12,5
12,5
8
8,8
10
10
10,5
6,3
7,1
7,5
7,1
8
5,4
6
5,9
6,
6,3
4,5
4,5
4,5
4,5
5
3,6
4
4
4
4
2,9
3,2
3,2
3,6
3,6
2,6
2,9
2,9
2,9
2,9
2,6
2,6
2,6
2,6
2,6
Weight
kg/m
135
144
170
184
70,8
85,9
101
110
119
41,6
51,1
57,4
55,6
68,3
25,0
31,1
31,0
37,1
40,6
16,4
17,1
17,8
18,1
21,3
9,90
11,5
12,2
12,8
13,5
5,28
6,31
6,81
8,76
9,33
3,12
3,90
4,14
4,36
4,83
2,01
2,29
2,57
2,70
2,95
0,962
1,13
1,41
1,77
1,88
0,522
0,632
0,688
0,890
2,60
2,82
3,04
1,72
1,94
2,05
2,16
2,38
1,12
1,27
1,43
1,50
1,63
0,694
0,815
0,888
0,997
1,06
0,420
0,505
0,549
0,644
2,96
3,22
3,47
1,96
2,20
2,33
2,46
2,72
1,28
1,45
1,62
1,70
1,86
0,785
0,923
1,01
1,13
1,20
0,472
0,569
0,620
0,728
3,32
3,61
3,89
2,20
2,47
2,62
2,76
3,05
1,43
1,62
1,82
1,91
2,08
0,874
1,03
1,12
1,26
1,34
0,522
0,632
0,688
0,810
7,47
7,80
6,21
6,52
6,84
5,58
3,68
4,00
4,32
4,95
5,27
2,43
2,74
2,90
3,06
3,37
1,57
1,79
2,01
2,11
2,30
0,962
1,13
1,24
1,39
1,48
0,571
0,692
0,754
0,890
8,58
8,95
6,40
6,73
7,13
7,48
7,85
4,22
4,58
4,95
5,67
6,04
2,78
3,13
3,31
3,50
3,86
1,79
2,04
2,29
2,41
2,63
1,09
1,29
1,41
1,59
1,68
0,639
0,778
0,850
1,01
9,68
10,1
7,21
7,59
8,04
8,43
8,86
4,75
5,16
5,57
6,39
6,81
3,12
3,52
3,73
3,93
4,35
2,01
2,29
2,57
2,70
2,95
1,21
1,44
1,57
1,77
1,88
0,703
0,860
0,942
1,12
13,7
10,8
11,2
11,7
11,9
12,6
8,03
8,45
8,94
9,39
9,86
5,28
5,74
6,20
7,11
7,57
3,46
3,90
4,14
4,36
4,83
2,22
2,53
2,84
2,99
3,27
1,33
1,58
1,73
1,96
2,08
0,762
0,938
1,03
1,22
24,1
26,4
27,9
28,6
31,5
17,0
18,9
19,3
21,5
23,5
13,3
13,9
14,4
14,7
15,6
9,90
10,4
11,0
11,6
12,2
6,49
7,06
7,63
8,76
9,33
4,23
4,78
5,07
5,36
5,93
2,69
3,08
3,47
3,65
4,00
1,59
1,90
2,09
2,37
2,52
45,1
50,1
36,2
40,0
41,2
45,0
46,0
26,7
29,3
31,0
31,8
34,9
18,8
20,9
21,4
23,9
26,1
14,7
15,4
16,0
16,3
17,3
11,0
11,5
12,2
12,8
13,5
7,17
7,80
8,43
9,70
10,3
4,66
5,27
5,89
5,91
6,55
2,95
3,38
3,81
4,02
4,41
1,72
2,07
2,28
2,59
2,76
0,883
1,10 1,18
1,21 1,31
1,46 1,58
29,0 32,6
32,1 36,0
37,2
40,6
41,4
21,5
23,5
24,8
25,5
28,0
15,1
16,8
17,2
19,2
21,0
11,9
12,4
12,9
13,1
13,9
8,83
9,30
9,84
10,3
10,9
5,80
6,31
6,81
7,82
8,3
3,79
4,28
4,54
4,79
5,30
2,42
2,77
3,11
3,28
3,59
1,44
1,72
1,89
2,14
2,27
0,816
1,01
1,11
1,33
19
112
78,1
83,8
89,4
95,0
101
55,7
57,3
61,3
66,9
72,5
40,2
44,4
45,8
50,1
51,7
29,7
32,5
34,8
35,3
38,8
20,9
23,5
23,7
26,5
29,0
16,4
17,1
17,8
18,1
19,2
12,1
12,9
13,5
14,2
14,9
7,92
8,63
9,33
10,7
11,4
5,13
5,81
6,17
6,52
7,24
3,23
3,71
4,19
4,42
4,85
1,87
2,28
2,48
2,83
3,02
1,41
1,71
1,85
125
87,1
93,3
99,6
106
112
62,0
63,7
68,3
74,6
80,8
44,8
49,5
51,0
55,8
57,3
33,0
36,2
38,6
39,3
43,2
23,3
26,0
26,4
29,5
32,3
18,2
19,0
19,7
20,1
21,3
13,5
14,3
15,0
15,8
16,6
8,77
9,56
10,3
11,9
12,7
5,67
6,41
6,82
7,21
8,01
3,54
4,07
4,61
4,87
5,34
2,01
2,47
2,70
3,08
3,30
139
97,1
104
111
118
125
69,1
71,2
76,1
83,1
90,1
49,9
55,1
56,9
62,1
64,1
36,8
40,3
43,1
43,8
48,2
25,9
29,1
29,4
32,9
35,9
20,2
21,1
21,9
22,4
23,7
15,0
15,9
16,7
17,6
18,5
9,71
10,6
11,5
13,2
14,1
6,24
7,08
7,53
7,97
8,85
3,87
4,47
5,07
5,35
5,89
2,68
2,94
3,37
3,60
157
110
118
126
134
142
78,2
80,0
86,1
94,1
102
56,4
62,4
64,3
70,3
72,0
41,6
45,5
48,4
49,5
54,5
29,2
32,6
33,2
37,1
40,6
22,8
23,8
24,8
25,3
26,7
16,8
17,8
18,8
19,8
20,8
10,9
11,9
12,9
14,9
15,8
6,95
7,91
8,42
8,91
9,92
4,27
4,95
5,62
5,95
6,55
2,91
3,21
3,70
3,97
177
124
133
141
150
159
87,9
90,0
96,9
106
115
63,4
70,1
72,3
79,0
81,1
46,7
51,1
54,4
55,6
61,2
32,8
36,6
37,2
41,7
45,6
25,5
26,6
27,7
28,3
30,0
18,8
19,9
21,0
22,1
23,3
12,1
13,2
14,4
16,6
17,7
7,69
8,77
9,34
9,90
11,0
4,67
5,43
6,19
6,56
7,24
198
138
148
158
168
176
98,2
101
108
118
128
70,8
78,3
80,7
88,2
91,1
52,1
57,1
61,2
62,1
68,3
36,5
41,0
41,5
46,5
50,9
28,4
29,6
30,9
31,5
33,4
20,9
22,3
23,4
24,6
25,9
13,4
14,6
15,9
18,4
19,6
8,43
9,65
10,3
10,9
12,2
5,05
5,91
6,76
7,17
7,93
3,48
4,03 4,34
4,33 4,68
218
152
163
174
185
196
108
111
119
130
141
77,7
85,9
88,7
96,9
100
57,1
62,6
67,1
68,1
74,9
40,0
45,0
45,4
50,9
55,8
31,0
32,4
33,8
34,5
36,5
22,8
24,3
25,5
26,9
28,3
14,6
15,9
17,3
20,1
21,4
9,10
10,4
11,1
11,8
13,2
5,39
6,33
7,27
7,72
8,56
248
173
185
198
211
223
123
126
135
148
160
88,3
97,8
101
110
113
64,9
71,1
76,0
77,4
85,2
45,3
50,8
51,6
57,8
63,4
35,1
36,7
38,2
39,0
41,4
25,7
27,4
28,9
30,3
32,0
16,3
17,9
19,5
22,6
24,2
10,1
11,6
12,4
13,2
14,8
6,91
7,99
8,51
9,45
274
191
205
219
232
246
135
138
149
163
177
97,3
108
111
122
125
71,4
78,3
83,3
85,3
93,3
49,8
55,6
56,7
63,6
69,7
38,5
40,3
42,0
42,9
45,4
28,1
29,8
31,6
33,3
35,1
17,7
19,5
21,2
24,7
26,4
10,9
12,5
13,4
14,3
16,0
8,54
9,11
10,2
312
217
233
249
264
280
154
157
170
185
201
110
122
126
138
141
80,9
88,8
94,2
96,7
107
56,2
62,7
64,1
72,0
79,0
43,4
45,4
47,4
48,4
51,3
31,6
33,4
35,5
37,4
39,5
19,7
21,7
23,7
27,6
29,6
11,9
13,8
14,8
15,8
17,8
9,90
11,1
352
245
263
280
298
316
173
177
191
209
227
124
138
142
156
160
90,9
99,8
106
109
120
63,0
70,7
71,9
80,8
88,7
48,5
50,8
53,0
54,1
57,4
35,1
37,4
39,6
41,8
44,0
21,7
24,0
26,2
30,7
32,9
12,9
15,0
16,2
17,3
19,6
393
273
293
313
333
353
193
199
213
233
253
138
153
158
173
179
101
111
119
121
133
69,8
78,9
79,8
89,8
98,6
53,6
56,2
58,6
59,9
63,6
38,6
41,4
43,6
46,1
48,6
23,7
26,2
28,7
33,7
36,2
16,2
17,4
18,7
21,1
430
299
321
343
365
386
211
217
233
255
277
151
168
173
189
195
110
121
130
132
146
75,9
85,7
86,9
97,8
107
58,1
60,9
63,6
65,0
69,1
41,7
44,7
47,2
49,9
52,7
25,3
28,0
30,8
36,2
39,0
22,6
491
341
366
391
416
441
241
247
266
291
316
172
191
197
216
222
125
137
147
150
166
85,7
96,7
98,2
111
122
65,3
68,6
71,6
73,1
77,8
46,5
49,8
52,8
55,7
59,0
27,7
30,8
34,0
40,2
43,4
544
377
405
433
461
489
266
273
294
322
349
189
210
217
238
245
137
151
162
165
183
93,9
106
108
122
134
71,3
74,8
78,2
80,0
85,2
50,4
54,1
57,4
60,8
64,3
33,0
36,5
43,5
47,0
615
426
458
489
521
552
300
306
331
360
395
213
237
245
268
274
154
170
181
186
205
105
118
120
136
150
79,0
83,0
86,9
88,9
94,8
682
472
507
542
577
612
331
340
366
401
436
235
261
270
296
305
169
187
200
204
226
114
130
132
149
165
85,8
90,3
94,5
96,7
103
59,5
64,2
68,3
72,5
77,0
47,5 50,8
51,4 55,2
55,3
59,2
63,2
67,1
71,1
57,6
536
576
616
656
696
375
386
416
456
496
265
295
305
335
346
190
210
226
230
255
128
145
148
168
185
95
100
105
108
115
870
599
645
690
735
780
419
431
464
509
555
295
329
340
374
385
211
233
250
256
284
140
160
163
185
205
103
109
115
117
126
64,9
70,2
74,9 80,8
79,8 86,3
85,0 92,1
728 776
504
542
579
617
654
353
363
391
428
466
250
278
288
316
326
180
198
213
217
241
121
138
140
159
175
90,5
95,3
99,9
102
109
62,3
67,3
71,7
76,3
81,1
738
796
852
909
965
513
528
570
626
682
358
401
415
457
472
253
281
303
309
344
165
190
193
221
246
119
126
133
137
147
815
878
941
1003
1066
565
581
627
690
753
392
439
455
502
518
275
306
330
338
377
177
205
208
240
267
134
142
146
158
890
959
1028
1097
1166
615
632
684
753
822
425
477
494
546
563
296
330
357
365
408
188
218
223
257
287
141
149
154
167
964
1039
1114
1189
1264
662
682
737
813
888
456
512
531
587
607
315
353
382
390
437
273
306
1036
1117
1199
1280
1362
710
731
791
873
954
486
547
567
629
649
333
374
406
415
466
288
323
1107
1194
1282
1370
1458
756
779
843
931
1019
514
580
602
668
691
350
394
428
438
493
301
340
1175
1271
1365
1459
1553
801
825
894
988
1082
542
613
636
707
731
366
413
449
460
519
355
662
712
762
812
863
461
474
511
561
611
323
361
373
411
424
229
255
274
280
311
151
174
176
201
223
111
117
123
126
136
91,8
98,2 105
1313
1419
1526
1632
1739
886
914
993
1099
1206
593
673
700
780
807
394
447
488
500
567
381
1379
1492
1604
1717
1830
927
957
1040
1153
1265
617
702
730
815
843
462
505
519
589
1245
1346
1446
1546
1646
844
870
944
1044
1145
568
644
669
744
769
381
431
469
481
544
368
2259
1507
1633
1754
1883
2008
1006
1038
1131
1256
1381
661
755
786
881
912
630
100
3.937
10:04 Uhr
4,75
5,16
6,20
7,11
7,57
2,78
3,13
3,31
3,50
4,35
1,57
1,79
2,01
2,11
2,63
0,962
1,13
1,24
1,39
1,48
2
2
2,3
2,6
2,6
1,8
1,8
1,8
2
Outside Diameter
mm
Nominal Wall
Thickness mm
Weight
kg/m
0,522
0,632
0,688
0,890
Nominal Wall
Thickness mm
13,5
16
17,2
20
1,4
1,6
1,8
2
2,3
2,6
2,9
3,2
3,6
4
4,5
5
5,6
6,3
7,1
8
8,8
10
11
12,5 14,2 16
17,5 20
22,2 25
28
30
32
36
40
45
50
55
60
65
70
75
80
85
90
0.056 0.064 0.072 0.080 0.092 0.104 0.116 0.128 0.144 0.160 0.176 0.192 0.219 0.250 0.281 0.312 0.344 0.394 0.438 0.500 0.562 0.625 0.688 0.787 0.875 1.000 1.100 1.180 1.260 1.420 1.570 1.770 1.970 2.170 2.360 2.570 2.756 2.953 3.150 3.346 3.543
Weight kg/m
W
30.11.2007
DIN
DIN
2448
2458
welded seamless
Standard Heavy
Pipes
Dimensions and weights - DIN 2448 / DIN 2458
20
33,40
42,16
48,26
60,32
73,02
88,90
101,60
114,30
141,30
168,27
219,07
273,05
323,85
355,60
406,40
457,20
508,00
558,80
609,60
660,40
711,20
762,00
812,80
863,60
914,40
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
6,35
4,77
4,77
5,54
3,96
4,19
4,19
7,92
5,54
5,54
6,35
4,77
4,77
4,77
3,76
4,19
4,57
3,05
3,40
3,40
7,92
7,92
7,92
7,92
7,92
7,92
6,35
6,35
6,35
6,35
6,35
6,35
3,05
3,40
3,05
3,05
2,77
3,05
2,77
2,77
2,77
2,11
SCH
10
12,70
12,70
12,70
12,70
12,70
12,70
9,52
9,52
9,52
7,92
7,92
7,92
6,35
6,35
6,35
SCH
20
15,87
15,87
15,87
15,87
12,70
12,70
14,27
9,52
9,52
11,12
7,04
7,80
8,38
SCH
30
8,18
9,27
9,52
6,02
6,55
7,11
5,49
5,74
3,91
5,16
3,38
3,56
3,68
2,87
2,77
SCH
40S
9,52
9,52
9,52
9,52
9,52
9,52
9,52
9,52
9,52
9,52
9,52
9,52
8,18
9,27
9,52
6,02
6,55
7,11
5,49
5,74
3,91
5,16
3,38
3,56
3,68
2,87
2,77
Std.
Weight
17,47
17,47
19,05
15,08
15,87
17,47
11,12
12,70
14,27
8,18
9,27
10,31
6,02
6,55
7,11
5,49
5,74
3,91
5,16
3,38
3,56
3,68
2,87
2,77
SCH
40
20,62
22,22
24,61
15,09
16,66
19,05
10,31
12,70
14,27
SCH
60
12,70
12,70
12,70
8,56
9,52
10,97
7,62
8,08
5,54
7,01
4,55
4,85
5,08
3,91
3,73
SCH
80S
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
12,70
8,56
9,52
10,97
7,62
8,08
5,54
7,01
4,55
4,85
5,08
3,91
3,73
Extra
Strong
26,19
28,57
30,96
19,05
21,44
23,82
12,70
15,08
17,47
8,56
9,52
10,97
7,62
8,08
5,54
7,01
4,55
4,85
5,08
3,91
3,73
SCH
80
32,54
34,92
38,89
23,82
26,19
29,36
15,08
18,26
21,44
SCH
100
38,10
41,27
46,02
27,79
30,96
34,92
18,26
21,44
25,40
11,12
12,70
14,27
SCH
120
44,45
47,62
52,37
31,75
36,53
39,67
20,63
25,40
28,57
SCH
140
50,01
53,97
59,54
35,71
40,49
45,24
23,01
28,57
33,32
13,49
15,87
18,26
11,12
8,74
9,52
6,35
6,35
7,14
5,56
4,77
SCH
160
22,22
25,40
25,40
17,12
19,05
21,95
15,24
16,15
11,07
14,02
9,09
9,70
10,16
7,82
7,47
Double
Extra
Strong
32
34
36
26
28
30
20
22
24
14
16
18
8
10
12
4
5
6
3
3 1/2
2
2 1/2
1
1 1/4
1 1/2
3/4
1/2
Nom.
Pipe
Size
10:04 Uhr
2,77
3,40
3,96
2,11
2,77
2,77
3,05
3,05
2,77
3,05
2,77
2,77
2,77
2,11
2,11
SCH
10S
30.11.2007
2,11
2,11
1,65
2,11
1,65
1,65
1,65
1,65
1
1 1/4
1 1/2
1,65
21,34
26,67
1/2
3/4
SCH
5S
Outside
Dia
Nom.
Pipe
Size
Outside
Dia
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
22.000
24.000
26.000
28.000
30.000
32.000
34.000
36.000
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
0.250
0.188
0.188
0.218
0.156
0.165
0.165
0.109
0.134
0.156
0.083
0.109
0.109
0.083
0.083
0.312
0.218
0.218
0.250
0.188
0.188
0.188
0.148
0.165
0.180
0.120
0.134
0.134
0.120
0.120
0.109
0.120
0.109
0.109
0.109
0.083
0.083
SCH
10S
0.312
0.312
0.312
0.312
0.312
0.312
0.250
0.250
0.250
0.250
0.250
0.250
SCH
10
0.500
0.500
0.500
0.500
0.500
0.500
0.375
0.375
0.375
0.312
0.312
0.312
0.250
0.250
0.250
SCH
20
0.625
0.625
0.625
0.625
0.625
0.500
0.500
0.562
0.375
0.375
0.438
0.277
0.307
0.330
SCH
30
0.322
0.365
0.375
0.237
0.258
0.280
0.216
0.226
0.154
0.203
0.133
0.140
0.145
0.109
0.113
SCH
40S
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.322
0.365
0.375
0.237
0.258
0.280
0.216
0.226
0.154
0.203
0.133
0.140
0.145
0.109
0.113
Std.
Weight
0.688
0.688
0.750
0.594
0.625
0.688
0.438
0.500
0.562
0.322
0.365
0.406
0.237
0.258
0.280
0.216
0.226
0.154
0.203
0.133
0.140
0.145
0.109
0.113
SCH
40
0.812
0.875
0.969
0.594
0.656
0.750
0.406
0.500
0.562
SCH
60
0.500
0.500
0.500
0.337
0.375
0.432
0.300
0.318
0.218
0.276
0.179
0.191
0.200
0.147
0.154
SCH
80S
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.337
0.375
0.432
0.300
0.318
0.218
0.276
0.179
0.191
0.200
0.147
0.154
Extra
Strong
1.031
1.125
1.219
0.750
0.844
0.938
0.500
0.594
0.688
0.337
0.375
0.432
0.300
0.318
0.218
0.276
0.179
0.191
0.200
0.147
0.154
SCH
80
1.281
1.375
1.531
0.938
1.031
1.156
0.594
0.719
0.844
SCH
100
1.500
1.625
1.812
1.094
1.219
1.375
0.719
0.844
1.000
0.438
0.500
0.562
SCH
120
1.750
1.875
2.062
1.250
1.438
1.562
0.812
1.000
1.125
SCH
140
1.969
2.125
2.344
1.406
1.594
1.781
0.906
1.125
1.312
0.531
0.625
0.719
0.438
0.344
0.375
0.250
0.250
0.281
0.188
0.219
SCH
160
0.875
1.000
1.000
0.674
0.750
0.864
0.600
0.636
0.436
0.552
0.358
0.382
0.400
0.294
0.308
Double
Extra
Strong
32
34
36
26
28
30
20
22
24
14
16
18
8
10
12
4
5
6
3
3 1/2
2
2 1/2
1
1 1/4
1 1/2
1/2
3/4
Nom.
Pipe
Size
10:04 Uhr
0.065
0.083
0.065
0.065
0.065
0.065
0.065
SCH
5S
30.11.2007
Nom.
Pipe
Size
21
22
0,405
0,540
0,675
0,840
1,050
1,315
1,660
1,900
2,375
2,875
3,500
4,000
4,500
5,563
6,625
8,625
10,750
12,750
14,000
16,000
18,000
20,000
22,000
24,000
30,000
inch
10,3
13,7
17,1
21,3
26,7
33,4
42,2
48,3
60,3
73,0
88,9
101,6
114,3
141,3
168,3
219,1
273,0
323,8
355,6
406,4
457,2
508,0
558,8
609,6
762,0
mm
Outside dia
0,065
0,065
0,065
0,065
0,065
0,065
0,083
0,083
0,083
0,083
0,109
0,109
0,109
0,134
0,156
0,156
0,165
0,165
0,188
0,188
0,218
0,250
inch
1,7
1,7
1,7
1,7
1,7
1,7
2,1
2,1
2,1
2,1
2,8
2,8
2,8
3,4
4,0
4,0
4,2
4,2
4,8
4,8
5,5
6,4
mm
Wallth.
0,5430
0,6902
0,8759
1,117
1,286
1,619
2,498
3,057
3,505
3,952
6,409
7,656
10,010
15,340
21,180
23,280
28,170
31,720
40,150
44,210
55,890
80,180
lbs/ft
kg/m
0,8081
1,0271
1,3035
1,6623
1,9138
2,4093
3,7174
4,5493
5,2160
5,8812
9,5376
11,3934
14,8965
22,8285
31,5193
34,6445
41,9216
47,2046
59,7498
65,7917
83,1735
119,3210
Weight
Schedule 5S
0,049
0,065
0,065
0,083
0,083
0,109
0,109
0,109
0,109
0,120
0,120
0,120
0,120
0,134
0,134
0,148
0,165
0,180
0,188
0,188
0,188
0,218
0,218
0,250
0,312
inch
1,24
1,7
1,7
2,1
2,1
2,8
2,8
2,8
2,8
3,05
3,05
3,05
3,05
3,4
3,4
3,8
4,2
4,6
4,8
4,8
4,8
5,5
5,5
6,4
7,9
mm
Wallth.
kg/m
0,1880
0,2798
0,3328
0,4953
0,4274
0,6361
0,6773
1,0079
0,8652
1,2876
1,4170
2,1087
1,8220
2,7115
2,1040
3,1311
2,6620
3,9615
3,5640
5,3038
4,3720
6,5063
5,0190
7,4691
5,6660
8,4320
7,8419
11,6702
9,3759 13,9530
13,5199 20,1200
18,8298 28,0221
24,3897 36,2963
27,9897
41,6537
32,0497 47,6957
36,0996 53,7227
46,4896 69,1848
51,1895
76,1791
64,0094 95,2574
99,8490 148,5932
lbs/ft
Weight
Schedule 10S
0,068
0,088
0,091
0,109
0,113
0,133
0,140
0,145
0,154
0,203
0,216
0,226
0,237
0,258
0,280
0,322
0,365
0,375
inch
1,7
2,2
2,3
2,8
2,9
3,4
3,6
3,7
3,9
5,2
5,5
5,7
6,0
6,6
7,1
8,2
9,3
9,5
mm
Wallth.
0,2470
0,4287
0,5729
0,8589
1,141
1,695
2,294
2,743
3,687
5,847
7,647
9,194
10,89
14,75
19,15
28,82
40,86
50,03
lbs/ft
kg/m
0,3676
0,6380
0,8526
1,2782
1,6980
2,5225
3,4139
4,0821
5,4869
8,7013
11,38
13,6822
16,2061
21,9504
28,4983
42,8889
60,8064
74,4529
Weight
Schedule 40S
0,095
0,119
0,126
0,147
0,154
0,179
0,191
0,200
0,218
0,276
0,300
0,318
0,337
0,375
0,432
0,500
0,500
0,500
inch
2,4
3,0
3,2
3,7
3,9
4,5
4,8
5,1
5,5
7,0
7,6
8,08
8,6
9,5
11,0
12,7
12,7
12,7
mm
Wallth.
0,3175
0,5401
0,7457
1,098
1,487
2,192
3,025
3,665
5,069
7,733
10,35
12,62
15,12
20,97
28,84
43,79
55,25
66,03
lbs/ft
kg/m
0,4725
0,8038
1,1097
1,6340
2,2129
3,2621
4,5017
5,4541
7,5435
11,5080
15,4025
18,7806
22,5011
31,2068
42,9187
65,1667
82,2211
98,2635
Weight
Schedule 80S
30.11.2007
10:04 Uhr
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
30
(inch)
Nominal
I.P.S.
diameter
30.11.2007
10:04 Uhr
Seite 23
1/8
Diameter
Wall
Inches Thickness
OD
Weight
lbs/ft
Weight
kg/m
40
80
.405
.405
.068
.095
.085
.095
0,13
0,16
1/4
40
80
.540
.540
.088
.119
.147
.185
0,22
0,28
3/8
40
80
.675
.675
.091
.126
.196
.256
0,29
0,38
1/2
5
10
40
80
160
.840
.840
.840
.840
.840
.065
.083
.109
.147
.188
.186
.232
.294
.376
.453
0,28
0,35
0,44
0,56
0,67
3/4
5
10
40
80
160
1.050
1.050
1.050
1.050
1.050
.065
.083
.113
.154
.219
.237
.297
.391
.510
.672
5
10
40
80
160
1.315
1.315
1.315
1.315
1.315
.065
.109
.133
.179
.250
1 1/4
5
10
40
80
160
1.660
1.660
1.660
1.660
1.660
1 1/2
5
10
40
80
160
Pipe
Schedule
Size
Number
Inches
Diameter
Wall
Inches Thickness
OD
Weight
lbs/ft
Weight
kg/m
5
10
40
80
120
160
4.500
4.500
4.500
4.500
4.500
4.500
.083
.120
.237
.337
.438
.531
1.354
1.942
3.733
5.183
6.573
7.786
2,02
2,87
5,56
7,72
9,79
11,60
5
10
40
80
120
160
5.563
5.563
5.563
5.563
5.563
5.563
.109
.134
.258
.375
.500
.625
2.196
2.688
5.057
7.188
9.353
11.400
3,27
4,00
7,53
10,71
14,20
16,98
0,35
0,44
0,58
0,76
1,00
5
10
40
80
120
160
6.625
6.625
6.625
6.625
6.625
6.625
.109
.134
.280
.432
.562
.719
2.624
3.213
6.564
9.884
12.950
15.690
3,91
4,79
9,78
14,72
19,29
.300
.486
.581
.751
.984
0,45
0,72
0,87
1,12
1,47
23.37
8
.065
.109
.140
.191
.250
.383
.625
.786
1.037
1.305
0,57
0,93
1,17
1,54
1,94
1.900
1.900
1.900
1.900
1.900
.065
.109
.145
.200
.281
.441
.721
.940
1.256
1.681
0,66
1,07
1,40
1,87
2,50
5
10
20
30
40
60
80
100
120
140
160
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
.109
.148
.250
.277
.322
.406
.500
.594
.719
.812
.906
3.429
4.635
7.735
8.543
9.878
12.330
15.010
17.620
21.000
23.440
25.840
5,11
6,90
11,52
12,72
14,71
18,37
22,36
26,24
31,28
34,91
38,84
10
5
10
40
80
160
2.375
2.375
2.375
2.375
2.375
.065
.109
.154
.218
.344
.555
.913
1.264
1.737
2.581
0,83
1,36
1,88
2,59
3,84
5
10
20
30
40
60
80
100
10.750
10.750
10.750
10.750
10.750
10.750
10.750
10.750
.134
.165
.250
.307
.365
.500
.594
.719
5.256
6.453
9.698
11.840
14.000
18.930
22.290
26.650
7,83
9,61
14,45
17,64
20,85
28,20
33,20
39,70
12
2 1/2
5
10
40
80
160
2.875
2.875
2.875
2.875
2.875
.083
.120
.203
.276
.375
.856
1.221
2.004
2.650
3.464
1,28
1,82
2,98
3,95
5,16
5
10
20
30
40
60
80
12.750
12.750
12.750
12.750
12.750
12.750
12.750
.156
.180
.250
.330
.406
.562
.688
7.258
8.359
11.550
15.140
18.520
25.310
30.660
10,81
12,45
17,20
22,55
27,59
37,70
45,67
5
10
40
80
160
3.500
3.500
3.500
3.500
3.500
.083
.120
.216
.300
.438
1.048
1.498
2.621
3.547
4.955
1,56
2,23
3,90
5,28
7,38
5
10
40
80
4.000
4.000
4.000
4.000
.083
.120
.226
.318
1.201
1.720
3.151
4.326
1,79
2,56
4,69
6,44
3 1/2
Pipe
Schedule
Size
Number
Inches
23
30.11.2007
10:04 Uhr
Seite 24
Material-No. 1.4301, 1.4541, 1.4571 seamless DIN 17456/17458 Tol. acc. DIN 2462
size
mm
weight
kg/m
4,00 x 1,00
0,075
5,00 x 1,00
0,100
6,00 x 0,50
x 1,00
x 1,50
x 2,00
0,069
0,125
0,169
0,200
8,00 x 0,50
x 1,00
x 1,50
x 2,00
0,094
0,175
0,244
0,300
10,00 x 1,00
x 1,50
x 2,00
x 2,50
0,225
0,319
0,401
0,470
12,00 x 1,00
x 1,50
x 2,00
0,275
0,394
0,501
13,50 x 1,60
x 2,00
x 2,35
0,447
0,576
0,656
14,00 x 1,00
x 1,50
x 2,00
x 2,50
x 3,00
0,326
0,470
0,601
0,720
0,826
15,00 x 1,00
x 1,50
x 2,00
0,351
0,507
0,651
16,00 x 1,00
x 1,50
x 2,00
x 2,50
x 3,00
0,376
0,545
0,701
0,845
0,977
17,20 x 1,600,625
x 2,00
0,761
x 2,30
0,874
x 2,90
1,038
24
18,00 x 1,00
x 1,50
x 2,00
0,426
0,620
0,801
20,00 x 1,00
x 1,50
x 2,00
x 2,50
x 3,00
x 4,00
x 5,00
0,476
2,695
0,901
1,096
1,377
1,603
1,878
21,30 x 1,60
x 2,00
x 2,65
x 2,90
x 3,20
0,789
0,967
1,238
1,936
1,450
22,00 x 1,00
x 1,50
x 2,00
x 3,00
x 4,00
0,526
0,770
1,002
1,427
1,803
25,00 x 1,00
x 1,50
x 2,00
0,601
0,883
1,152
size
mm
weight
kg/m
2,50
x 3,00
x 4,00
x 5,00
1,409
1,653
2,070
2,504
26,90 x 1,60
x 2,00
x 2,65
x 3,20
1,043
1,247
1,609
1,889
28,00 x 1,00
x 1,50
x 2,00
x 3,00
0,767
0,995
1,302
1,878
30,00 x 1,00
x 1,50
x 2,00
x 2,60
x 3,00
x 4,00
x 5,00
0,726
1,070
1,402
1,784
2,028
2,604
3,130
33,70 x 1,60
x 2,00
x 2,60
x 2,90
x 3,25
x 3,60
x 4,05
x 4,50
1,324
1,588
2,025
2,237
2,478
2,713
3,007
3,290
35,00 x 1,50
x 2,00
x 2,50
x 4,00
1,258
1,653
2,035
3,105
38,00 x 1,50
x 2,00
x 2,60
x 3,00
x 3,60
x 4,00
x 5,00
1,371
1,803
2,305
2,629
3,101
3,405
4,132
40,00 x 1,50
x 2,00
x 2,50
x 3,00
x 4,00
x 5,00
1,446
1,903
2,348
2,779
3,606
4,382
42,40 x 1,60
x 2,00
x 2,60
x 3,25
x 4,05
1,635
2,023
2,591
3,186
3,889
44,50 x 2,00
x 2,60
x 2,90
x 4,00
2,128
2,728
3,021
4,056
48,30 x 1,60
x 2,00
x 2,60
x 3,25
x 4,05
1,871
2,319
2,975
3,666
4,487
50,00 x 2,00
x 2,50
x 3,00
x 5,00
2,404
2,974
3,531
5,634
size
mm
weight
kg/m
51,00 x 2,00
x 2,60
2,454
3,151
54,00 x 2,00
2,604
57,00 x 2,60
x 2,90
3,542
3,929
60,00 x 5,00
6,886
60,30 x 1,60
x 2,00
x 2,60
x 2,90
x 3,20
x 3,65
x 4,50
2,352
2,920
3,757
4,168
4,575
5,178
6,288
70,00 x 2,00
x 2,90
x 4,00
x 5,00
3,405
4,878
6,611
8,138
76,10 x 2,003,711
x 2,60
4,785
x 2,90
5,315
x 3,65
6,622
x 4,00
7,222
x 4,50
8,068
x 6,30
11,011
80,00 x 5,00
9,390
88,90 x 2,00
x 2,60
x 2,90
x 3,20
x 3,60
x 4,05
x 4,05
x 6,30
x 7,62
4,352
5,618
6,245
6,867
7,689
8,605
9,510
13,030
15,509
90,00 x 5,00
10,642
101,60 x 3,60
x 4,05
x 5,74
8,834
9,893
13,778
108,00 x 2,90
x 3,20
x 3,60
x 4,00
x 5,00
7,632
8,397
9,411
10,417
12,836
114,30 x 2,60
x 3,05
x 3,20
x 3,60
x 4,50
x 6,02
7,272
8,496
8,902
9,979
12,372
16,322
133,00 x 4,00
12,921
139,70 x 4,00
13,592
159,00 x 4,50
17,409
168,30 x 5,00
x 7,11
20,445
28,690
219,10 x 6,30
x 8,18
x 12,70
33,570
43,200
66,020
30.11.2007
10:04 Uhr
Seite 25
weight
kg/m
6 x 1,00
0,125
8 x 1,00
0,175
size
mm
weight
kg/m
1,286
1,588
2,025
2,478
63,5 x 2,00
3,080
68 x 1,50
2,498
69 x 2,00
3,355
35 x 1,50
1,258
36 x 2,00
1,703
70 x 2,00
x 2,90
3,405
4,873
1,371
1,803
2,305
76,1 x 1,60
x 2,00
x 2,30
x 2,60
x 2,90
x 3,65
2,985
3,711
4,250
4,785
5,315
6,622
10 x 1,00
0,225
0,275
0,394
14 x 1,00
0,326
15 x 1,00
x 1,50
0,351
0,508
38 x 1,50
x 2,00
x 2,60
16 x 1,00
x 1,50
0,376
0,545
40 x 1,50
x 2,00
1,446
1,903
42,4 x 1,60
x 2,00
x 2,60
x 3,25
1,635
2,023
2,591
3,186
43 x 1,50
1,559
44,5 x 2,00
x 2,60
2,128
2,728
48,3 x 1,60
x 2,00
x 2,60
x 3,25
17 x 1,00
0,401
0,426
0,620
20 x 1,00
x 1,50
x 2,00
0,476
0,695
0,901
21,3 x 1,60
x 2,00
x 2,65
0,789
0,967
1,238
22 x 1,50
0,770
23 x 1,50
0,808
25 x 1,50
x 2,00
0,883
1,152
26,9 x 1,60
x 2,00
x 2,65
1,014
1,247
1,609
28 x 1,50
0,995
30 x 1,50
x 2,00
x 2,60
1,070
1,402
1,784
32 x 1,50
x 2,00
1,146
1,502
33 x 1,50
1,183
weight
kg/m
33,7 x 1,60
x 2,00
x 2,60
x 3,25
12 x 1,00
x 1,50
18 x 1,00
x 1,50
size
mm
83 x 1,50
3,061
84 x 2,00
4,106
88,9 x 2,00
x 2,30
x 2,60
x 2,90
x 3,20
4,352
4,987
5,618
6,245
6,867
1,871
2,319
2,975
3,666
101,6 x 2,00
4,988
50 x 2,00
2,404
51 x 1,50
x 2,00
1,859
2,454
53 x 1,50
1,934
54 x 2,00
2,604
57 x 2,00
x 2,60
x 2,90
2,754
3,542
3,929
60,3 x 1,60
x 2,00
x 2,60
x 2,90
x 3,65
2,352
2,920
3,757
4,168
5,178
size
mm
139,7 x 2,00
x 2,60
x 2,90
weight
kg/m
6,896
8,926
9,934
153 x 1,50
5,690
154 x 2,00
7,612
159 x 2,00
x 2,60
x 3,00
x 4,00
7,863
10,182
11,719
15,525
168,3 x 2,00
x 2,60
x 3,00
x 4,00
x 5,00
8,328
10,788
12,417
16,456
20,445
204 x 2,00
10,116
216 x 3,00
16,001
10,872
14,095
15,700
21,544
26,805
103 x 1,50
3,812
219,1 x 2,00
x 2,60
x 2,90
x 4,00
x 5,00
104 x 2,00
5,108
254 x 2,00
12,620
108 x 2,00
x 2,60
x 2,90
x 4,00
5,308
6,862
7,632
10,417
273 x 3,00
x 4,00
x 5,00
20,282
26,943
33,554
114,3 x 2,00
x 2,60
x 2,90
x 3,60
5,624
7,272
8,089
9,979
128 x 1,50
129 x 2,00
133 x 2,00
x 2,60
x 3,00
x 4,00
6,560
8,490
9,766
12,921
304 x 2,00
15,124
306 x 3,00
22,761
323,9 x 3,00
x 4,00
24,106
32,041
4,751
355,6 x 3,00
26,487
6,360
406,4 x 3,00
30,303
508 x 4,00
50,481
size
mm
weight
kg/m
size
mm
weight
kg/m
18 x 1,00
0,426
40 x 1,50
1,446
22 x 1,00
x 1,50
0,526
0,770
52 x 1,00
x 1,50
1,277
1,897
28 x 1,00
x 1,50
0,676
0,995
70 x 2,00
3,405
85 x 2,00
4,157
34 x 1,00
x 1,50
0,826
1,221
104 x 2,00
5,108
40 x 1,00
0,977
129 x 2,00
6,360
154 x 2,00
7,612
25
30.11.2007
10:04 Uhr
Seite 26
Outside Diameter
inch
mm
Wall Thickness
inch
mm
No.
6
8
10
15
20
25
32
40
50
65
80
(90)
100
125
150
200
200
250
250
250
300
300
350
400
0.405
0.540
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
8.625
10.750
10.750
10.750
12.750
12.750
14.000
16.000
10,3
13,7
17,1
21,3
26,7
33,4
42,2
48,3
60,3
73
88,9
101,6
114,3
141,3
168,3
219,1
219,1
273
273
273
323,9
323,9
355,6
406,4
0.068
0.088
0.091
0.109
0.113
0.133
0.140
0.145
0.154
0.203
0.216
0.226
0.237
0.258
0.280
0.277
0.322
0.279
0.307
0.365
0.330
0.375
0.375
0.375
1,73
2,24
2,31
2,77
2,87
3,38
3,56
3,68
3,91
5,16
5,49
5,74
6,02
6,55
7,11
7,04
8,18
7,09
7,80
9,27
8,38
9,52
9,52
9,52
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
30
40
-30
40
30
STD
30
30
0.24
0.42
0.57
0.85
1.13
1.68
2.27
2.72
3.65
5.79
7.58
9.11
10.79
14.62
18.97
24.70
28.55
31.20
34.24
40.48
43.77
49.56
54.57
62.58
0,36
0,63
0,85
1,26
1,68
2,50
3,38
4,05
5,43
8,62
11,3
13,6
16,1
21,8
28,2
36,8
42,5
46,4
51,0
60,2
65,1
73,8
81,2
93,1
6
8
10
15
20
25
32
40
50
65
80
(90)
100
125
150
200
250
300
350
400
0.405
0.540
0.675
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
10.3
13.7
17.1
21,3
26,7
33,4
42,2
48,3
60,3
73
88,9
101,6
114,3
141,3
168,3
219,1
273
323,9
355,6
406,4
0.095
0.119
0.126
0.147
0.154
0.179
0.191
0.200
0.218
0.276
0.300
0.318
0.337
0.375
0.432
0.500
0.500
0.500
0.500
0.500
2,41
3,02
3,20
3,73
3,91
4,55
4,85
5,08
5,54
7,01
7,62
8,08
8,56
9,52
11,0
12,7
12,7
12,7
12,7
12,7
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
60
--
0.31
0.54
0.74
1.09
1.47
2.17
3.00
3.63
5.02
7.66
10.25
12.51
14.98
20.78
28.57
43.39
54.74
65.42
72.09
82.77
0,46
0,80
1,10
1,26
2,19
3,23
4,46
5,40
7,47
11,4
15,3
18,6
22,3
30,9
42,5
64,6
81,5
97,4
107
123
0.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
5.563
6.625
8.625
21,3
26,7
33,4
42,2
48,3
60,3
73
88,9
114,3
141,3
168,3
219,1
0.294
0.308
0.358
0.382
0.400
0.436
0.552
0.600
0.674
0.750
0.864
0.875
7,47
7,82
9,09
9,70
10,2
11,1
14,0
15,2
17,1
19,1
21,9
22,2
1.71
2.44
3.66
5.21
6.41
9.03
13.70
18.58
27.54
38.55
53.16
72.42
2,54
3,63
5,45
7,75
9,54
13,4
20,4
27,7
41,0
57,4
79,1
108
26
15
20
25
32
40
50
65
80
100
125
150
200
30.11.2007
10:04 Uhr
Seite 27
pipe
10
11
12
13
14
15
16
17
18
Schedule
Schedule
Schedule
Schedule
Schedule
Schedule
Standard
Schedule
Schedule
Schedule
Extra
Schedule
Schedule
Schedule
Schedule
Schedule
Double
5S*
10S*
10
20
30
40S*
wall
40
60
80S*
strong
80
100
120
140
160
size
extra
strong
in
1/8
0.28
0.36
0.36
0.36
0.46
0.46
0,46
1/4
0.49
0.63
0.63
0.63
0.80
0.80
0.80
3/8
0.63
0.85
0.85
0.85
1.10
1.10
1.10
1/2
0.80
1.00
1.26
1.26
1.26
1.62
1.62
1.62
1.95
2.54+
3/4
1.03
1.28
1.68
1.68
1.68
2.19
2.19
2.19
2.89
3.63+
1.32
2.08
2.50
2.50
2.50
3.23
3.23
3.23
4.23
5.45+
*1 1/4 1.65
*
1 1/2 1.90
2.69
3.38
3.38
3.38
4.46
4.46
4.46
5.60
7.75+
3.11
4.05
4.05
4.05
5.40
5.40
5.40
7.23
9.54+
2.40
3.93
5.43
5.43
5.43
7.47
7.47
7.47
11.10 13.44+
*2 1/2 3.69
*
3
4.51
5.25
8.62
8.62
8.62
11.40
11.40
11.40
14.90 20.39+
6.44
11.28
11.28
11.28
15.25
15.25
15.25
21.30
27.65
3 1/2 5.18
7.40
13.56
13.56
13.56
18.62
18.62
18.62
5.83
8.35
16.06
16.06
15.06
22.30
22.30
22.30
28.25
33.51 40.99+
*5
*
6
9.46
11.56
21.76
21.76
21.76
30.92
30.92
30.92
40.24
49.05 57.38+
11.31
13.83
28.23
28.23
28.23
42.52
42.52
42.52
54.20
67.47 79.11+
14.78
19.94
33.28
36.76 42.49
42.49
42.49 53.07
64.57
64.57
64.57
75.79
10
22.67
27.83
41.73
50.96 60.24
60.24
60.24 81.46
81.46
81.46
12
33.08
36.01
49.68
65.14 73.76
73.76
14
34.33
41.27 54.63
67.98
81.21
81.21
94.31 127.11
16
41.52
47.25
77.92
93.13
18
46.77
53.23 70.53
87.85 122.12
20
59.20
68.55 78.47
116.97 154.97
22
65.18
75.48 86.42
128.89 170.86
24
82.42
94.37 94.37
140.81 209.54
26
127.58 202.65
152.73+
202.65
28
164.65+
218.54
176.57+
234.44
30
62.58
32
188.50+ 342.17
250.33
34
200.42+ 364.01
266.22
36
212.34+ 420.21
282.12
* Schedule 5S, 10S, 40S and 80S* apply to austenitic chromium-nickel steel pipe only.
Due to the variable densities of austenitic stainless steels, these masses are based on carbon steel (see Clause 3), and should
be corrected accordingly.
Except where marked + masses of standard, extra strong and double extra strong pipe have pipe of a corresponding mass
listed under one of the schedule numbers.
* The use of these sizes should be avoided wherever possible.
NOTE 1. For masses of threaded pipe with couplings see API Std. 5L.
NOTE 2. For nominal pipe sizes greater than 36 inches see API Std. 5LS.
NOTE 3. For tolerances on masses see appropriate specifications.
27
30.11.2007
10:04 Uhr
Seite 28
Threaded Pipe
Outside diameter
Wall thickness
~
inch
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
mm
6,00
8,00
10,00
15,00
20,00
25,00
32,00
40,00
50,00
65,00
80,00
100,00
inch
0,40625
0,53125
0,6875
0,84375
1,0625
1,34375
1,6875
1,90625
2,375
3,00
3,5
4,00
4,5
mm
inch
10,3
13,5
17,5
21,4
27,0
34,1
42,9
48,4
60,3
76,2
88,9
101,6
114,3
0,072
0,072
0,072
0,080
0,092
0,104
0,104
0,116
0,116
0,128
0,128
0,144
0,144
mm
1,8
1,8
1,8
2,0
2,35
2,65
2,65
2,9
2,9
3,25
3,25
3,65
3,65
lb/ft
0,243
0,347
0,453
0,640
0,944
1,35
1,73
2,19
2,76
3,90
4,58
5,88
6,64
kg/m
0,361
0,517
0,674
0,952
1,41
2,01
2,58
3,25
4,11
5,80
6,81
8,74
9,89
lb/ft
0,245
0,350
0,457
0,646
0,954
1,36
1,75
2,22
2,81
3,98
4,69
6,00
6,84
kg/m
0,364
0,521
0,680
0,961
1,42
2,03
2,61
3,29
4,18
5,92
6,98
8,92
10,20
) As related to an average length of approx. 20 ft (6m). Theoretical weights of galvanized pipe are approx. 4,5% higher
than the values above. Threads conforming to ISO/R 7.
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
mm
6,00
8,00
10,00
15,00
20,00
25,00
32,00
40,00
50,00
65,00
80,00
100,00
Outside diameter
~
inch
0,40625
0,53125
0,6875
0,84375
1,0625
1,34375
1,6875
1,90625
2,375
3,00
3,5
4,00
4,5
Wall thickness
mm
inch
mm
10,3
13,5
17,5
21,4
27,0
34,1
42,9
48,4
60,3
76,2
88,9
101,6
114,3
0,072
0,072
0,072
0,080
0,092
0,104
0,104
0,116
0,116
0,128
0,128
0,144
0,144
1,8
1,8
1,8
2,0
2,35
2,65
2,65
2,9
2,9
3,25
3,25
3,65
3,65
lb/ft
kg/m
lb/ft
0,243
0,347
0,453
0,640
0,944
1,35
1,73
2,19
2,76
3,90
4,58
5,88
6,64
0,361
0,517
0,674
0,952
1,41
2,01
2,58
3,25
4,11
5,80
6,81
8,74
9,89
0,245
0,350
0,457
0,646
0,954
1,36
1,75
2,22
2,81
3,98
4,69
6,00
6,84
kg/m
0,364
0,521
0,680
0,961
1,42
2,03
2,61
3,29
4,18
5,92
6,98
8,92
10,20
) As related to an average length of approx. 20 ft (6m). Theoretical weights of galvanized pipe are approx. 4,5% higher
than the values above. Threads conforming to ISO/R 7.
28
30.11.2007
10:04 Uhr
Seite 29
Threaded Pipe
Nominal size
Outside diameter 2)
inch
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
mm
6,00
8,00
10,00
15,00
20,00
25,00
32,00
40,00
50,00
65,00
80,00
1)
100,00
125,00
150,00
inch
mm
0,40625
0,53125
0,6875
0,84375
1,0625
1,34375
1,6875
1,90625
2,375
3,00
3,5
4,00
4,5
5,5
6,5
Wall thickness
10,2
13,5
17,2
21,3
26,9
33,7
42,4
48,3
60,3
76,1
88,9
101,6
114,3
139,7
165,1
inch
0,080
0,092
0,092
0,104
0,104
0,128
0,128
0,128
0,144
0,144
0,160
0,160
0,176
0,192
0,192
mm
2,0
2,35
2,35
2,65
2,65
3,25
3,25
3,25
3,65
3,65
4,05
4,05
4,50
4,85
4,85
lb/ft
0,273
0,437
0,573
0,822
1,06
1,64
2,11
2,43
3,42
4,38
5,69
6,53
8,14
10,9
12,9
kg/m
0,407
0,650
0,852
1,22
1,58
2,44
3,14
3,61
5,10
6,51
8,47
9,72
12,1
16,2
19,2
lb/ft
0,275
0,440
0,577
0,828
1,07
1,65
2,13
2,46
3,47
4,46
5,80
6,65
8,34
11,2
13,3
kg/m
0,410
0,654
0,858
1,23
1,59
2,46
3,17
3,65
5,17
6,63
8,64
9,90
12,4
16,7
19,8
Outside diameter 2)
inch
1/8*
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
mm
6,00
8,00
10,00
15,00
20,00
25,00
32,00
40,00
50,00
65,00
80,00
1)
100,00
125,00
150,00
inch
0,40625
0,53125
0,6875
0,84375
1,0625
1,34375
1,6875
1,90625
2,375
3,00
3,5
4,00
4,5
5,5
6,5
Wall thickness
mm
10,2
13,5
17,2
21,3
26,9
33,7
42,4
48,3
60,3
76,1
88,9
101,6
114,3
139,7
165,1
inch
0,104
0,116
0,116
0,128
0,128
0,160
0,160
0,160
0,176
0,176
0,192
0,192
0,212
0,212
0,212
mm
2,65
2,9
2,9
3,25
3,25
4,05
4,05
4,05
4,5
4,5
4,85
4,85
5,4
5,4
5,4
lb/ft
0,331
0,517
0,686
0,977
1,27
2,00
2,58
2,98
4,14
5,31
6,76
7,76
9,71
12,0
14,3
kg/m
0,493
0,769
1,02
1,45
1,90
2,97
3,84
4,43
6,17
7,90
10,1
11,6
14,4
17,8
21,2
lb/ft
0,333
0,520
0,690
0,983
1,28
2,01
2,60
3,01
4,19
5,39
6,87
7,88
9,91
12,3
14,7
kg/m
0,496
0,773
1,03
1,46
1,91
2,99
3,87
4,47
6,24
8,02
10,3
11,8
14,7
18,3
21,8
29
30.11.2007
10:04 Uhr
Seite 30
Nominal
Pipe Size
in
in.
mm
Pitch of
Thread
p
in.
Number of
Threads per
Inch
mm
Depth of Thread
max
h
in.
mm
in.
l2
mm
1/8
0,37476
9,519
0,03704
0,941
27
0,02963
0,753
0,180
4,572
0,264
6,703
1/4
0,48989
12,443
0,05556
1,411
18
0,04444
1,129
0,200
5,080
0,402
10,206
3/8
0,62701
15,926
0,05556
1,411
18
0,04444
1,129
0,240
6,096
0,408
10,358
1/2
0,77843
19,772
0,07143
1,814
14
0,05714
1,451
0,320
8,128
0,534
13,556
3/4
0,98887
25,117
0,07143
1,814
14
0,05714
1,451
0,339
8,611
0,546
13,861
1,23863
31,461
0,08696
2,209
11 1/2
0,06957
1,767
0,400
10,160
0,683
17,343
1 1/4
1,58338
40,218
0,08696
2,209
11 1/2
0,06957
1,767
0,420
10,668
0,707
17,953
1 1/2
1,82234
46,288
0,08696
2,209
11 1/2
0,06957
1,767
0,420
10,668
0,724
18,377
2,29627
58,325
0,08696
2,209
11 1/2
0,06957
1,767
0,436
11,074
0,757
19,215
2 1/2
2,76216
70,159
0,12500
3,175
0,10000
2,540
0,682
17,323
1,138
28,893
30,480
3,38850
85,992
0,12500
3,175
0,10000
2,540
0,766
19,456
1,200
3 1/2
3,88881
98,776
0,12500
3,175
0,10000
2,540
0,821
20,853
1,250
31,750
4,38712
111,433
0,12500
3,175
0,10000
2,540
0,844
21,438
1,406
33,020
5,44929
138,412
0,12500
3,175
0,10000
2,540
0,937
23,800
1,513
35,720
6,50597
165,252
0,12500
3,175
0,10000
2,540
0,958
24,333
1,713
38,418
8,50003
215,901
0,12500
3,175
0,10000
2,540
1,063
27,000
1,300
43,498
10
10,62094
269,772
0,12500
3,175
0,10000
2,540
1,210
30,734
1,925
48,895
12
12,61781
320,492
0,12500
3,175
0,10000
2,540
1,360
34,544
2,125
53,975
30
30.11.2007
10:04 Uhr
Seite 31
DAUN
31
30.11.2007
10:04 Uhr
Seite 32
mm sizes
O.D.
32
6,00
5,5
6,00
6,5
7,00
8,00
6,5
7,5
7,5
8,5
9,00
9,5
10,00
10,00
13,00
11,00
14,00
12,5
13,00
14,00
12,5
14,00
15,00
15,00
15,00
20,00
21,00
22,00
23,00
25,00
I.D.
20,00
25,00
28,00
32,00
36,00
40,00
50,00
56,00
60,00
63,00
67,00
71,00
80,00
80,00
90,00
90,00
90,00
100,00
106,00
112,00
125,00
132,00
140,00
150,00
160,00
160,00
170,00
180,00
190,00
200,00
Minimum
guaranteed
thickness
5,7
5,2
5,7
6,2
6,7
7,6
6,2
7,1
7,1
8,1
8,6
9,0
9,5
9,5
12,4
10,5
13,3
11,9
12,4
13,3
11,9
13,3
14,3
14,3
14,3
19,0
20,0
20,9
21,9
23,8
kg/m.
4,2
4,5
5,4
6,6
7,9
10,0
9,9
12,7
13,6
16,3
18,3
20,5
22,9
24,2
32,0
30,0
38,8
37,8
41,8
47,5
47,0
55,8
63,4
68,0
72,3
96,8
108,0
120,0
132,2
151,8
Centering on O.D.
maximum
minimum
O.D.
I.D.
31,5
35,5
39,5
44,5
49,5
55,5
62,00
70,00
74,00
79,00
84,00
89,00
94,00
99,00
105,00
111,00
117,00
124,00
131,00
139,00
149,00
159,00
169,00
179,00
189,00
199,00
211,00
223,00
235,00
249,00
21,6
26,6
29,6
33,6
37,6
41,9
51,9
58,2
62,3
65,5
69,6
73,8
77,9
83,0
83,4
93,3
93,8
103,8
109,9
116,2
129,3
136,6
144,9
155,1
165,3
166,0
176,3
186,7
197,0
207,5
Centering on I.D.
maximum
minimum
O.D.
I.D.
30,4
34,4
38,4
43,4
48,4
54,2
61,4
69,1
73,1
77,9
82,8
87,6
92,5
97,4
103,1
109,1
114,8
121,8
128,6
136,4
146,3
156,0
165,7
175,5
185,3
194,8
206,5
218,2
229,9
243,5
20,5
25,5
28,5
32,5
36,5
40,5
51,00
57,00
61,00
64,00
68,00
72,00
76,00
81,00
81,00
91,00
91,00
101,00
107,00
113,00
126,00
133,00
141,00
151,00
161,00
161,00
171,00
181,00
191,00
201,00
Series 1
32,00
36,00
40,00
45,00
50,00
56,00
63,00
71,00
75,00
80,00
85,00
90,00
95,00
100,00
106,00
112,00
118,00
125,00
132,00
140,00
150,00
160,00
170,00
180,00
190,00
200,00
212,00
224,00
236,00
250,00
Thickness
30.11.2007
10:04 Uhr
Seite 33
Minimum
thickness
kg/m.
Centering on O.D.
maximum
minimum
O.D.
I.D.
Centering on I.D.
maximum
minimum
O.D.
I.D.
36,00
40,00
45,00
50,00
56,00
63,00
71,00
75,00
80,00
85,00
90,00
95,00
100,00
106,00
112,00
118,00
125,00
132,00
140,00
150,00
160,00
170,00
180,00
190,00
200,00
212,00
224,00
236,00
250,00
8,00
7,5
8,5
9,00
10,00
11,5
13,00
12,5
15,00
15,00
13,5
14,00
14,5
17,5
16,00
19,00
17,5
21,00
20,00
22,00
24,00
26,00
27,5
29,00
30,00
31,00
32,00
33,00
35,00
20,00
25,00
28,00
32,00
36,00
40,00
45,00
50,00
50,00
55,00
63,00
67,00
71,00
71,00
80,00
80,00
90,00
90,00
100,00
106,00
112,00
118,00
125,00
132,00
140,00
150,00
160,00
170,00
180,00
7,6
7,1
8,1
8,5
9,4
10,9
12,4
11,9
14,3
14,3
12,8
13,3
13,8
16,6
15,2
18,1
16,6
20,0
19,0
20,9
22,8
24,7
26,1
27,6
28,5
29,5
30,4
31,4
33,3
5,8
6,4
8,1
9,6
11,9
15,2
19,5
20,3
25,2
27,2
27,0
29,7
32,4
40,0
40,1
48,9
49,4
60,7
63,0
73,7
85,0
97,8
109,5
121,5
133,1
147,0
161,0
176,0
197,4
35,5
39,5
44,5
49,5
55,5
62,00
70,00
74,00
79,00
84,00
89,00
94,00
99,00
105,00
111,00
117,00
124,00
131,00
139,00
149,00
159,00
169,00
179,00
189,00
199,00
211,00
223,00
235,00
249,00
21,8
26,8
29,8
34,0
38,3
42,4
47,7
52,8
53,1
58,2
66,2
70,3
74,5
74,9
83,8
84,3
94,3
94,7
104,8
111,2
117,6
124,0
131,4
138,7
147,0
157,3
167,7
178,0
188,5
34,2
38,2
43,2
48,0
53,8
61,1
68,8
72,8
77,5
82,4
87,4
92,3
97,1
102,8
108,8
114,5
121,5
128,1
136,0
145,7
155,4
165,0
174,8
184,5
194,2
205,9
217,6
229,3
242,9
20,5
25,5
28,5
32,5
36,5
41,00
46,00
51,00
51,00
56,00
64,00
68,00
72,00
72,00
81,00
81,00
91,00
91,00
101,00
107,00
113,00
119,00
126,00
133,00
141,00
151,00
161,00
171,00
181,00
32,00
36,00
40,00
45,00
50,00
56,00
63,00
71,00
75,00
80,00
85,00
90,00
95,00
100,00
106,00
112,00
118,00
125,00
132,00
140,00
150,00
160,00
170,00
180,00
190,00
200,00
212,00
224,00
236,00
250,00
8,00
10,00
10,00
12,5
12,5
14,00
15,5
17,5
17,5
20,00
20,00
20,00
22,5
22,00
25,00
24,5
27,5
27,00
30,5
30,00
35,00
35,00
35,00
40,00
42,00
44,00
43,5
46,00
48,00
50,00
16,00
16,00
20,00
20,00
25,00
28,00
32,00
36,00
40,00
40,00
45,00
50,00
50,00
56,00
56,00
63,00
63,00
71,00
71,00
80,00
80,00
90,00
100,00
100,00
106,00
112,00
125,00
132,00
140,00
150,00
7,6
9,5
9,5
11,9
11,9
13,3
14,7
16,6
16,6
19,0
19,0
19,0
21,4
20,9
22,8
23,3
26,1
25,7
29,0
28,5
33,3
33,3
33,3
38,0
39,9
41,8
41,3
43,7
45,6
47,5
5,0
6,7
7,7
10,4
12,0
15,0
18,7
23,7
25,8
30,6
33,3
35,8
41,6
43,9
51,8
54,9
63,7
67,8
79,1
84,7
102,9
112,0
121,0
143,4
159,0
176,0
188,4
210,5
232,0
257,0
31,5
35,5
39,5
44,5
49,5
55,5
62,00
70,00
74,00
79,00
84,00
89,00
94,00
99,00
105,00
111,00
117,00
124,00
131,00
139,00
149,00
159,00
169,00
179,00
189,00
199,00
211,00
223,00
235,00
249,00
17,8
18,0
22,0
22,2
27,2
30,5
34,8
39,2
43,3
43,6
48,7
53,8
54,2
60,2
60,6
67,7
68,1
76,2
76,7
85,8
86,5
96,7
106,9
107,6
114,0
120,4
133,6
141,1
149,5
160,0
30,2
34,0
38,0
42,8
47,8
53,6
60,8
68,5
72,5
77,2
82,1
87,0
91,8
96,7
102,4
108,3
114,0
120,9
127,5
135,4
144,9
154,7
164,5
174,0
183,7
193,4
205,2
216,8
228,4
242,0
16,5
16,5
20,5
20,5
25,5
28,5
33,00
37,00
41,00
41,00
46,00
51,00
51,00
57,00
57,00
64,00
64,00
72,00
72,00
81,00
81,00
91,00
101,00
101,00
107,00
113,00
126,00
133,00
141,00
151,00
Series 3
I.D.
Series 2
Thickness
33
O.D.
30.11.2007
10:04 Uhr
Seite 34
1.2
1.4
1.6
1.8
2.0
2.3
2.4
2.5
2.6
2.8
1.12
2.9
3.2
3.5
4.0
4.2
4.5
3.03
4.8
5.0
5.5
5.8
6.0
4,75
15
17.8
19
0.527
1.05
21.7
0.607
1.14
1.18
1.22
1.31
1.34
1.46
25.4
0.716
1.15
1.31
1.36
1.41
1.46
1.56
1.61
1.75
1.89
2.11
26.7
0.765
1.21
1.39
1.44
1.50
1.54
1.65
1.71
1.85
2.00
2.24
27.2
0.769
0.891
1.01
1.13
1.24
1.41
1.47
1.52
1.58
1.68
1.74
1.89
2.05
2.29
28.6
0.811
0.939
1.07
1,19
1.31
1.49
1.55
1.61
1.67
1.78
1.84
2.00
2.17
2.43
31.8
0.906
1.05
1.19
1.33
1.47
1.67
1.74
1.81
1.87
2.00
2.07
2.26
2.44
2.74
2.86
34.0
0.971
1.13
1.28
1.43
1.58
1.80
1.87
1.94
2.01
2.15
2.22
2.43
2.63
2.96
3.09
3.27
36.4
1.05
1.22
1.35
1.52
1.68
1.94
2,01
2,10
2,16
2,32
2,41
2,62
2,82
3,20
3,34
3,54
38.1
1,09
1,27
1,44
1,61
1,78
2,03
2,11
,19
2,28
2,44
2,52
2,75
2,99
3,36
3,51
3,73
3,94
4,08
4,42
4,62
42.3
1,23
1,43
1,58
1,78
1,97
2,28
2,36
2,46
2,54
2,73
2,83
3,08
3,33
3,79
3,95
4,19
4,42
4,58
4,99
5,22
5,37
42.7
1,23
1,43
1,62
1,82
2,01
2,29
2,39
2,48
2,57
2,76
2,85
3,12
3,38
3,82
3,99
4,24
4,47
4,65
5,05
5,28
5,43
44.0
1,28
1,49
1,65
1,85
2,05
2,37
2,46
2,57
2,65
2,84
2,95
3,22
3,48
3,96
4,12
4,38
4,62
4,79
5,22
5,46
5,62
45.0
1,30
1,51
1,71
1,92
2,12
2,42
2,52
2,62
2,72
2,91
3,01
,30
3,58
4,04
4,23
4,49
4,74
4,93
5,36
5,61
5,77
48.6
1,40
1,63
1,85
2,08
2,30
2,63
2,73
2,84
2,95
3,16
3,27
3,58
3,89
4,40
4,60
4,89
5,18
5,38
5,85
6,12
6,30
50.8
1,48
1,71
1,94
2,18
2,41
2,75
2,86
2,98
3,09
3,31
3,43
3,76
4,08
4,62
4,83
5,14
5,44
5,65
6,14
6,44
6,63
51.0
1,49
1,73
1,92
2,16
2,41
2,76
2,88
3,00
3,10
3,33
3,44
3,77
4,10
4,64
4,85
5,16
5,45
5,67
6,17
6,46
6,66
54.0
1,58
1,84
57.0
1,94
2,19
2,93
3,05
3,19
3,30
3,54
3,65
4,01
4,36
4,93
5,16
5,49
5,80
6,04
6,58
6,89
7,10
2,45
2,71
3,10
3,23
3,36
3,49
3,74
3,87
4,25
4,62
5,23
5,47
5,83
6,18
6,41
6,98
7,32
7,55
60.3
2,06
60.5
2,06
2,31
2,57
2,85
3,29
3,43
3,58
3,70
3,97
4,10
4,51
4,90
5,55
5,81
6,19
6,57
6,82
7,43
7,80
8,03
2,32
2,61
2,89
3,30
3,44
3,58
3,71
3,98
4,12
4,52
4,92
5,57
5,83
6,21
6,59
6,84
7,46
7,82
63.5
2,17
8,06
2,41
2,74
3,03
3,47
3,62
3,76
3,90
4,19
4,33
4,76
5,18
5,87
6,14
6,55
6,95
7,21
7,87
8,25
65.0
2,22
8,51
2,47
2,81
3,11
3,56
3,70
3,85
4,00
4,29
4,44
4,88
5,31
6,02
6,30
6,71
7,13
7,40
8,07
8,47
8,73
70.0
2,70
3,03
3,35
3,84
4,00
4,16
4,32
4,64
4,80
5,27
5,74
6,51
6,82
7,27
7,72
8,01
8,75
9,18
9,47
73.0
2,82
3,16
3,47
4,03
4,18
4,37
4,51
4,85
5,01
5,51
6,00
6,81
7,13
7,60
8,04
8,38
9,16
9,61
9,91
75.0
2,90
3,25
3,57
4,14
4,30
4,49
4,64
4,99
5,16
5,67
6,17
7,00
7,33
7,82
8,28
8,63
9,43
9,90
10,2
76.2
2,94
3,30
3,63
4,19
4,37
4,56
4,72
5,07
5,24
5,76
6,27
7,12
7,46
7,96
8,42
8,78
9,59
10,1
10,4
76.3
2,95
3,31
3,66
4,20
4,37
4,55
4,73
5,08
5,25
5,77
6,28
7,13
7,47
7,97
8,46
8,79
9,60
10,1
10,4
82.6
3,20
3,59
3,94
4,57
4,75
4,96
5,13
5,51
5,70
6,27
6,83
7,75
8,12
8,67
9,18
9,57
10,5
11,0
11,3
88.9
3,44
3,87
4,25
4,93
5,12
5,35
5,52
5,95
6,15
6,76
7,37
8,37
8,77
9,37
9,92
10,3
11,3
11,9
12,3
89.1
3,45
3,88
4,30
4,92
5,13
5,34
5,55
5,96
6,16
6,78
7,39
8,39
8,79
9,39
9,98
10,4
11,3
11,9
12,3
101.6
4,91
5,63
5,87
6,11
6,35
6,82
7,06
7,76
8,47
9,63
10,1
10,8
11,5
11,9
13,0
13,7
14,1
114.3
5,54
6,37
6,62
6,89
7,16
7,70
7,97
8,77
9,56
10,9
11,4
12,2
13,0
13,5
14,8
15,5
16,0
127.0
6,16
7,07
7,37
7,68
7,98
8,58
8,86
9,78
10,7
12,1
12,7
13,6
14,4
15,0
16,5
17,3
17,9
139.8
6,80
7,80
8,13
8,46
8,80
9,46
9,79
10,8
11,8
13,4
14,0
15,0
16,0
16,6
18,2
19,2
19,8
141.3
6,87
7,88
8,22
8,53
8,89
9,47
9,80
10,8
11,8
13,4
14,1
15,0
16,0
16,6
18,2
19,2
19,8
152.4
7,42
8,51
8,88
10,7
11,7
12,8
14,6
15,3
16,4
17,4
18,2
19,9
21,0
21,7
165.2
8,05
9,24
9,64
10,0
11,6
12,8
14,0
15,9
16,7
17,8
19,0
19,8
21,7
22,8
23,6
168.3
8,20
9,42
9,82
177.8
8,67
9,95
10,4
10,4
11,2
10,2
10,6
11,4
11,8
13,0
14,2
16,2
17,0
18,2
19,4
20,1
22,1
23,2
24,0
10,8
11,2
12,1
12,5
13,8
15,0
17,1
18,0
19,2
20,5
21,3
23,4
24,6
25,4
190.7
13,0
13,4
14,8
16,2
18,4
19,3
20,7
22,0
22,9
25,1
26,4
27,3
216.3
14,7
15,3
16,8
18,4
20,9
22,0
23,5
25,0
25,9
28,6
30,1
31,1
219.1
14,9
15,5
17,0
18,7
21,2
22,3
23,8
25,4
26,3
29,0
30,5
31,5
244.5
20,8
23,7
24,9
26,6
28,2
29,4
32,4
34,1
35,3
267.4
22,8
26,0
27,3
29,2
31,1
32,2
32,5
37,4
38,7
273.1
23,2
26,5
27,8
29,8
31,6
32,9
36,3
48,2
39,5
318.5
37,1
38,5
42,5
44,7
46,2
323.9
31,6
33,1
35,4
37,8
39,2
43,3
45,5
47,0
339.7
33,1
34,7
37,2
39,6
41,3
45,3
57,8
49,4
355.6
39,0
41,5
43,1
47,6
50,0
51,7
406.4
44,6
47,0
49,5
54,5
57,3
59,2
457.2
50,2
53,5
55,8
61,4
64,6
66,7
508.0
55,9
59,6
62,0
68,2
71,8
74,3
558.8
75,0
79,1
81,8
609.6
81,9
86,4
89,3
34
30.11.2007
10:04 Uhr
Seite 35
6.5
6.6
6.9
7.0
7.5
7.9
8.0
4,88
5,31
5,37
5,52
5,67
5,74
5,81
6,02
6,09
5,58
5,73
5,80
5,88
6,09
6,16
5,78
5,93
6,01
6,09
6,31
6,39
6,75
5,93
6,09
6,41
6,25
6,48
6,56
6,94
6,48
6,66
6,74
6,84
7,10
7,18
7,60
6,82
7,01
7,10
7,19
7,47
7,56
6,85
7,04
7,13
7,23
7,50
7,31
7,51
7,61
7,71
7,77
7,99
8,09
8.5
8,01
8,36
8,44
7,60
8,05
8,40
8,48
8,01
8,11
8,60
8,98
9,07
9,5
8,20
8,52
8,63
9,16
9,32
9,67
10,2
9.0
9.5
10.0
10.5
11.0
11.5
12.0 12.7
14.3
15.1
16.0
17.5
19.1
6.2
8,27
8,51
8,62
8,74
9,09
9,20
9,77
10,2
10,3
10,9
11,4
8,30
8,54
8,66
8,17
9,12
9,24
9,80
10,3
10,4
10,9
11,4
8,76
9,01
9,14
9,2
9,63
9,75
10,4
10,8
10,9
11,5
12,1
8,99
9,25
9,38
9,51
9,89
10,0
10,6
11,2
11,2
11,8
12,4
9,75
10,0
10,2
10,3
10,7
10,9
11,6
12,1
12,2
12,9
13,5
10,2
10,5
10,7
10,8
11,2
11,4
12,1
12,7
12,8
13,5
14,2
14,9
10,5
10,8
11,0
11,1
11,6
11,7
12,8
13,1
13,2
13,9
14,6
15,3
16,0
10,7
11,0
11,2
11,3
11,8
11,9
12,7
13,3
13,5
14,2
14,9
15,6
16,3
10,7
11,0
11,2
11,3
11,8
12,0
12,7
13,3
13,5
14,2
14,9
15,6
16,3
11,7
12,0
12,2
12,4
12,9
13,1
13,8
14,6
14,7
15,5
16,3
17,1
17,9
12,6
13,0
13,2
13,4
14,0
14,1
15,0
15,8
16,0
16,9
17,7
18,6
19,5
20,3
21,1
21,9
12,7
13,1
13,2
13,4
14,0
14,2
15,0
15,8
16,0
16,9
17,8
18,6
19,5
20,4
21,2
22,0
14,6
15,0
15,2
15,5
16,1
16,3
17,4
18,3
18,5
19,6
20,6
21,6
22,6
23,6
24,6
25,6
16,5
17,0
17,3
17,5
18,3
18,5
19,7
20,7
21,0
22,2
23,4
24,6
25,7
26,9
28,0 29,2
30,3
18,5
19,0
19,3
19,6
20,4
20,7
22,1
23,2
23,5
24,8
26,2
27,5
28,9
30,2
31,5
34,0 35,8
20,4
21,1
21,1
21,7
22,6
22,9
24,4
25,7
26,0
27,5
29,0
30,5
32,0
33,5
34,9 36,4
37,8
21,3
21,1
21,4
21,7
22,6
23,0
24,5
25,7
26,6
27,8
29,1
30,6
32,4
33,9
35,3 36,8
38,3 40,3
22,4
23,3
23,4
23,7
24,8
25,1
26,8
28,2
28,5
30,2
31,8
33,5
35,1
35,4
38,4 40,0
41,5
43,8
24,3
25,1
25,4
25,8
26,9
27,3
29,1
30,6
31,0
32,8
34,7
36,5
38,3
40,1
41,8
45,3
47,8
24,8
25,6
25,9
26,3
27,5
27,8
29,7
31,2
31,6
33,5
35,4
37,2
39,0
40,9
42,7 44,5
14,2
32,8
43,6
47,2
31,8
39,8
46,3 48,7
26,2
27,1
27,5
27,9
29,1
29,5
31,5
33,1
33,5
35,5
37,5
39,4
41,4
43,3
45,2
28,2
29,1
29,5
30,0
31,3
31,7
33,9
35,6
36,0
38,1
40,3
42,4
44,6
46,7
48,7 50,8
52,9 55,7
32,1
33,1
33,6
34,1
35,6
36,1
38,6
40,6
41,1
43,6
46,0
48,4
50,9
53,3
55,7
60,5 63,7
71,2
74,9
32,6
33,6
34,1
34,6
41,1
41,6
44,1
46,6
49,1
51,6
54,0
56,4 58,9
61,3
72,2
76,0
36,4
37,6
38,1
38,7
40,4
41,0
43,8
46,1
46,7
49,5
52,3
55,1
57,8
60,6
63,3
66,1
68,8 70,9
81,2
85,4
39,9
41,2
41,8
42,4
44,3
45,0
48,0
50,6
51,2
54,3
57,3
604
63,5
66,5
69,6 72,6
75,6 79,8
89,3
93,9
40,8
42,1
42,7
43,4
45,3
45,9
49,1
51,7
52,3
55,5
58,6
61,7
64,9
68,0
71,1
74,2
77,3
81,5
91,3
91,3
101
47,7
49,3
50,0
50,8
53,0
53,8
57,5
60,5
61,3
65,0
68,7
72,4
76,1
79,8
83,4
87,1
90,7 95,8
107
113
119
130
48,6
50,1
50,9
51,6
53,9
54,7
58,5
61,6
62,3
66,1
69,9
73,7
77,4
81,1
84,9 88,6
92,3
97,5
109
115
121
132
58,1
49,1
51,7
64,6
62,2
99,2
51,0
52,6
53,4
54,2
56,6
57,4
61,4
64,4
65,4
69,4
73,4
77,4
81,3
85,2
89,2
93,1
97,0
102
115
121
128
139
53,4
55,1
55,8
56,8
59,3
60,2
64,3
67,7
68,6
72,8
76,9
81,1
85,2
89,4
93,5
97,6
102
107
120
127
134
146
61,2
63,1
63,9
65,1
68,0
69,0
73,7
77,6
78,4
83,4
88,2
93,0
97,8
103
107
112
117
123
138
146
154
168
182
69,0
71,1
72,1
73,3
76,6
77,8
83,1
87,5
88,4
94,1
99,5
105
110
116
121
126
132
139
156
165
174
190
206
230
76,7
79,2
80,4
81,6
85,3
86,5
92,6
97,4
98,6
105
111
117
123
129
135
141
147
155
174
184
194
212
84,5
87,2
88,5
89,9
93,9
95,3
102
107
109
115
122
129
135
142
149
155
162
171
192
202
214
234
92,3
95,2
96,7
98,1
103
104
111
117
119
126
133
141
148
155
162
170
177
187
210
221
234
158
35
30.11.2007
10:04 Uhr
Seite 36
Diameter
(mm)
Wall Thickness
O.D.
16
400.0
115
121
117
400
I.D.
6.0
6.4
7.0
7.9
8.0
9.0
9.5
17
18
19
406.4
450
18
457.2
500
115
168
179
500
20
508.0
117
123 135
171
190 204
230 243
550
22
558.8
24
609.6
163
172 182
174
185
195 205
191
202
211 225
218 229
161
164
177
162
171
175
188 201
115
117
174
117
119 133
138 145
141
160
216
214
217
227
240 253
230 244
258 272
263 277
148
162
177
187
191
166
181
192
197
212
243 258
274 290
176
285 301
26
660.4
700
103
137
161
170
17
303 319
700
28
711.2
104
111
173
196
207
219
224
241
258
308 324
193
211
223 229
247
319 337
276
330 348
12
750
30
762.0
800
32
850
34
863.6
900
36
914.4
38
965.2
40
1016.0
1000
137
157
166
175
167
176
800
117
125
155 156
176
185 195
214
233
247
22
271
347 366
812.8
119
127 139
157
159
178
188 198
217
237
251
256
276
295
334
353 372
800 119
127 139
157
281
363 384
167
169
190 200
177
179
201
202 213
157
177
179
142
165
181
189 212
151
231
247
314
314
334 355
311
333 354
316
407 431
351
420 443
149 159
174
273
297
314
174
196 199
274
299
317
157
167
44
1117.6
164
175
192
216
175
191
216
46
1168.4
1200
48
1219.2
1350
50
1371.6
1500
60
1524.0
1600
64
1625.6
1800
72
1828.8
1100 164
177
1350
1500
1600
443 467
452 477
466 491
246 260 273 300 327 346 354 381 408 435 461
488 515
219
246 260
496 524
271
415
274
286
314
387
416
475
504
208 235 238 268 283 298 328 359 380 389 469 449 480
445
511 539
533 562
510
541 571
319
601 634
318
410
447
607 641
473
437
471
668 702
410
447
474
674 712
477
505
517
714 753
357
477
505
517
557
377
397
437
419
401 426
219
375 396
398 420
440
376
375 398
312
1066.8
401
674
718 759
671
804 848
715
760
671
717
762
807 852
2000
745
795 846
896 946
2100
677
940 993
764
2200
2300
684 724
2400
756
2500
2600
818
2700
36
210
294
291
147
42
1000
274
149
153
160
227
650
700 104
113
131
155 159
113
110
819
874
929
985 1040
742
799 856
914
971
1029 1087
774
103 1133
2800
2900
3000
30.11.2007
10:04 Uhr
Seite 37
21
22
23
24
25
26
276
27
28
29
30
32
36
38
316
336 355
397
419
440
476
504
216
237
248 259
241
252 264 275 286 298 309 320 331 343 354
271
315
376
310
324
266 278
291 304
317
286 300
314
327
341
291 305
319
333
347
360
305 321
316
42
44
46
48
50
415
391
416
512
475
527
552
501
562
588
614
631
665
669
815
392 407 422 437 452 466 496 525 554 583
612
640
669
416
651
682
712
742
341
390 407
43
439 456
662
693
724
755 785
410
447
615
653 692
730
769
807
610
645 678
357
374
377
388 402
417
40
374
34
428
472
419
437 454
472
489 507
524 542
441
459
496
515
551
391
410
478
533
714
579
616
572 593
614
657 699
742
785
617
746
779
785
820
762
798
834
829
872
916
436 457
537
557
577
774
812
851
889
591
862
904
944
454
477
617
879
927
976
913
956
547
512
491
515
570 594
641
597
712
750
416
466 489
517
576
697
441
500 524
497
551
670
776
823 870
916
963
1009
736
762
814
1026
1079
516
617
717
742
767
817
866
1013
1061
541
647
674
700 726 752 779 805 857 909 960 1012 1063
1114
915 964
1183
677
787
815
842 897
1167
707 736
794 822
851
1219
910
1286
705 732
765
760
817
848 879
765
798 830 862 895 928 960 993 1057 1121 1186 1250 1313
1377
676
710
744
779
1442
741
778
815
851
888 924 960 997 1033 1069 1105 1178 1249 1321 1393 1464
1535
917
20
951
750 788 826 864 902 940 678 1017 1055 1093 1132 1209 1286 1364 1441 1519
792
831
870 909 948 987 1026 1064 1103 1142 1180 1258 1334 1411 1488 1564
961 1002 1043 1083 1124 1165 1206 1288 1370 1452 1535 1618
892 936 980 1024 1068 1112 1156 1200 1253 1287 1331 1418 1505 1592 1678 1764
898 943 988 1034 1080 1125 1171 1216 1262 1308 1354 1446 1538 1630 1722 1815
996 1047 1097 1147 1198 1248 1299 1350 1400 1451 1502 1603 1705 1807 1910 2012
2115
1046 1098 1151 1204 1257 1310 1363 1416 1469 1523 1576 1682 1789 1896 2003 2111
2219
1095 1150 1205 1261 1316 1372 1427 1483 1538 1594 1650 1761 1873 1985 2097 2210
2322
1144 1202 1260 1318 1375 1433 1491 1549 1607 1666 1724 1840 1957 2074 2191 2308
2426
1194 1254 1314 1374 1435 1495 1555 1616 1676 1737 1798 1919 2041 2163 2285 2407
2529
1243 1306 1368 1431 1494 1557 1620 1683 1746 1809 1872 1998 2125 2251 2378 2505
2633
1292 1357 1422 1488 1553 1618 1684 1749 1815 1880 1946 2077 2208 2340 2472 2604
2736
1342 1409 1477 1544 1612 1680 1748 1816 1884 1952 2020 2156 2292 2429 2566 2703
2840
2977
1391 1460 1531 1601 1671 1742 1812 1882 1953 2023 2094 2235 2376 2518 2659 2801
2944
3086
1440 1513 1582 1658 1731 1803 1876 149 2022 2095 2168 2314 2460 2606 2753
200
3047
3194
1489 1564 1639 1715 1790 1865 1940 2015 2091 2166 2242 2393 2544 2695 847
2999
3151
3303
37
30.11.2007
10:04 Uhr
Seite 38
Thickness
Mass
Sectional
Area
Moment of
Inertia
Radius of
Gyration
Elastic
Modulus
Plastic
Modulus
DxD
mm
t
mm
M
kg/m
A
cm2
l
cm4
r
cm
Z
cm3
S
cm3
1,12
1,39
1,43
1,80
2,15
2,21
2,44
2,65
2,81
3,03
3,35
3,66
4,46
3,71
4,26
4,66
5,72
6,97
5,17
5,67
6,97
8,54
6,08
7,46
10,1
6,99
8,59
11,7
14,4
9,72
13,3
16,4
12,0
14,8
18,4
22,9
27,9
18,0
22,3
27,9
34,2
21,1
26,3
32,9
40,4
22,7
28,3
35,4
43,6
53,4
66,4
34,2
43,0
53,0
65,2
81,4
38,2
48,0
59,3
73,0
91,5
48,1
60,5
75,0
92,8
117
90,7
112
142
106
132
167
122
152
1,42
1,78
1,82
2,30
2,74
2,82
3,10
3,38
3,58
3,86
4,26
4,66
5,68
4,72
5,42
5,94
7,28
8,88
6,58
7,22
8,88
10,9
7,74
9,50
12,9
8,90
10,9
14,9
18,4
12,4
16,9
20,9
15,3
18,9
23,4
29,1
35,5
22,9
28,5
35,5
43,5
26,9
33,5
41,9
51,5
28,9
36,0
45,1
55,5
68,0
84,5
43,6
54,7
67,5
83,0
104
48,6
61,1
75,5
93,0
117,0
61,2
77,1
95,5
118
149
116
143
181
136
168
213
156
193
0,76
0,88
1,59
1,90
2,14
3,49
3,76
4,00
8,39
8,94
9,71
10,4
12,1
17,7
19,9
21,6
25,5
29,6
35,6
38,7
46,1
54,4
57,9
69,5
90,1
88,0
106
139
165
154
202
242
234
283
341
408
474
503
610
738
870
814
994
1212
1441
1009
1236
1510
1803
2125
2500
2186
2689
3237
3856
4607
3033
3744
4525
5419
6524
6049
7510
9141
11050
13480
16150
19630
24160
26050
31810
39370
39350
48190
20 x 20
25 x 25
30 x 30
40 x 40
50 x 50
60 x 6O
70 x 70
8O x 80
90 x 90
100 x 100
120 x 120
140 x 140
150 x 150
180 x 180
200 x 200
250 x 250
300 x 300
350 x 350
400 x 400
2,0
2,6
2,0*
2,6*
3,2*
2,6
2,9*
3,2
2,4*
2,6
2,9*
3,2
4,0
2,5*
2,9*
3,2
4,0
5,0
2,9*
3,2
4,0
5,0
2,9*
3,6
5,0
2,9*
3,6
5,0
6,3
3,6
5,0
6,3
4,0
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
12,5
16,0
6,3
8,0
10,0
12,5
16,0
6,3
8,0
10,0
12,5
16,0
6,3
8,0
10,0
12,5
16,0
10,0
12,5
16,0
10,0
12,5
16,0
10,0
12,5
38
0,73
0,70
0,94
0,91
0,88
1,11
1,10
1,09
1,53
1,52
1,51
1,50
1,46
1,94
1,92
1,91
1,87
1,83
2,33
2,31
2,28
2,24
2,73
2,70
2,64
3,14
3,11
3,05
3,00
3,52
3,46
3,41
3,91
3,87
3,81
3,74
3,65
4,69
4,63
4,56
4,47
5,50
5,45
5,38
5,29
5,91
5,86
5,78
5,70
5,59
5,44
7,08
7,01
6,92
6,82
6,66
7,90
7,83
7,74
7,63
7,48
9,94
9,87
8,78
9,68
9,53
11,8
11,7
11,6
13,9
13,8
13,6
15,9
15,8
0,76
0,88
1,27
1,52
1,71
2,33
2,51
2,67
4,20
4,47
4,86
5,22
6,07
7,07
7,98
8,62
10,20
11,90
11,9
12,9
15,4
18,1
16,5
19,9
25,7
22,0
26,5
34,7
41,3
34,1
45,0
53,9
46,8
56,6
68,2
81,5
94,9
83,8
102
123
145
116
142
173
206
135
165
201
240
283
333
243
299
360
428
512
303
374
452
542
652
484
601
731
884
1078
1077
1309
1610
1489
1817
2250
1968
2409
0,95
1,15
1,56
1,91
2,21
2,88
3,13
3,37
5,03
5,39
5,90
6,40
7,61
8,38
9,54
10,4
12,5
14,9
14,1
15,3
18,6
22,3
19,4
23,6
31,2
25,7
31,3
41,7
50,5
40,0
53,6
65,3
54,9
67,1
82,0
99.9
119
98,4
121
149
178
136
168
207
250
157
194
240
290
348
421
283
352
429
519
634
353
439
536
651
799
559
699
858
1048
1298
1254
1538
1916
1725
2122
2655
2272
2800
Torsional Constants
J
cm4
C
cm3
1,22
1,44
2,52
3,06
3,49
5,56
6,02
6,45
13,1
14,0
15,3
16,5
19,5
27,4
31,1
33,8
40,4
47,6
55,2
60,1
72,4
86,3
89,3
108
142
135
164
217
261
237
315
381
361
439
533
646
761
775
949
1159
1381
1251
1538
1889
2269
1548
1907
2348
2829
3372
4029
3357
4156
5041
6062
7339
4647
5770
7020
8479
10330
9228
11511
14086
17139
21109
24776
30290
37566
39840
48869
60901
60028
73815
1,07
1,23
1,81
2,14
2,38
3,30
3,54
3,75
6,04
6,41
6,94
7,43
8,56
10,2
11,5
12,4
14,5
16,7
17,2
18,6
22,1
25,8
24,1
28,7
36,8
32,1
38,5
49,8
58,8
49,7
64,9
77,1
68,2
81,9
97,9
116
134
122
147
176
206
170
206
249
294
197
240
291
345
403
468
355
434
519
613
725
444
545
655
779
929
712
880
1065
1279
1548
1575
1905
2327
2186
2655
3265
2896
3530
Superficial
Area
per m
Approx.
Length
per Tonne
m2
0,076
0,074
0,096
0,094
0,093
0,114
0,114
0,113
0,155
0,154
0,154
0,153
0,151
0,195
0,194
0,193
0,191
0,189
0,234
0,233
0,231
0,229
0,274
0,272
0,269
0,314
0,312
0,309
0,306
0,352
0,349
0,346
0,391
0,389
0,386
0,383
0,379
0,469
0,466
0,463
0,459
0,549
0,546
0,543
0,539
0,589
0,586
0,583
0,579
0,573
0,566
0,706
0,703
0,699
0,693
0,686
0,786
0,783
0,779
0,773
0,766
0,986
0,983
0,979
0,973
0,966
1,18
1,17
1,17
1,38
1,37
1,37
1,58
1,57
893
720
700
556
466
453
410
378
356
331
299
274
225
270
235
215
175
144
194
177
144
118
165
135
99,1
144
117
85,5
69,5
103
75,2
61,0
83,4
67,6
54,4
43,7
35,9
55,6
44,9
35,9
29,3
47,4
38,1
30,4
24,8
44,1
35,4
28,3
23,0
18,8
15,1
29,3
23,3
18,9
15,4
12,3
26,2
20,9
16,9
13,7
11,0
20,8
16,6
13,4
10,8
8,55
11,1
8,93
7,05
9,44
7,58
5,99
8,20
6,58
30.11.2007
10:04 Uhr
Seite 39
DxB
Thickness
t
Sectional
Area
A
mm
mm
kg/m
cm2
2,4*
2,6
2,9*
3,2
2,5*
2,9*
3,2
4,0
2,9*
3,2
4,0
2,9*
3,6
5,0
2,9*
3,2
4,0
5,0
6,3*
2,9*
3,6
5,0
6,3
3,6
5,0
6,3
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
5,0
6,3
8,0
10,0
12,5
16,0
6,3
8,0
10,0
12,5
16,0
6,3
8,0
10,0
12,5
16,0
10,0
12,5
16,0
10,0
12,5
16,0
2,81
3,03
3,35
3,66
3,71
4,26
4,66
5,72
5,17
5,67
6,97
6,08
7,46
10,1
6,53
7,18
8,86
10,9
13,4
6,99
8,59
11,7
14,4
9,72
13,3
16,4
14,8
18,4
22,9
27,9
18,7
23,3
29,1
35,7
18,0
22,3
27,9
34,2
22,7
28,3
35,4
43,6
53,4
66,4
38,2
48,0
59,3
73,0
91,5
48,1
60,5
75,0
92,6
117
90,7
112
142
106
132
167
3,58
3,86
4,26
4,66
4,72
5,42
5,94
7,28
6,58
7,22
8,88
7,74
9,50
12,9
8,32
9,14
11,3
13,9
17,1
8,90
10,9
14,9
18,4
12,4
16,9
20,9
18,9
23,4
29,1
35,5
23,9
29,7
37,1
45,5
22,9
28,5
35,5
43,5
28,9
36,0
45,1
55,5
68,0
84,5
48,6
61,1
75,5
93,0
117
61,2
77,1
95,5
118
149
116
143
181
136
168
213
Size
50 x 30
60 x 40
80 x 40
90 x 50
100 x 50
100 x 60
120 x 60
120 x 80
150 x 100
160 x 80
200 x 100
250 x 150
300 x 200
400 x 200
450 x 250
Moment of Inertia
Radius of Gyration
l
x-y
cm4
11,6
12,40
13,50
14,50
23,1
26,2
28,3
33,60
53,5
58,1
69,6
82,9
99,80
130
108
117
142
170
202
121
147
192
230
230
304
366
370
447
537
628
747
910
1106
1312
753
917
1113
1318
1509
1851
2269
2718
3218
3808
4178
5167
6259
7518
9089
7880
9798
11940
14460
17700
24140
29410
36300
37180
45470
56420
Elastic Modulus
y-y
cm4
x-y
cm
y-y
cm
5,14
5,45
5,9
6,31
12,20
13,7
14,8
17,3
17,70
19,1
22,6
32,80
39,1
50
36,10
39,1
46,7
55,1
64,2
54,60
65,4
84,7
99,9
76,90
99,9
118
195
234
278
320
396
479
577
678
251
302
361
419
509
618
747
881
1022
1175
1886
2317
2784
3310
3943
4216
5219
6331
7619
9239
8138
9820
11950
14900
18100
22250
1,80
1,79
1,78
1,77
2,21
2,20
2,18
2,15
2,85
2,84
2,80
3,27
3,24
3,18
3,60
3,58
3,55
3,50
3,44
3,69
3,66
3,60
3,54
4,31
4,24
4,18
4,43
4,37
4,29
4,20
5,59
5,53
5,46
5,37
5,74
5,68
5,60
5,50
7,23
7,17
7,09
7,00
6,88
6,71
9,27
9,19
9,10
8,99
8,83
11,30
11,30
11,20
11,10
10,90
14,50
14,30
14,20
16,60
16,50
16,30
1,20
1,19
1,18
1,16
1,61
1,59
1,58
1,54
1,64
1,63
1,59
2,06
2,03
1,97
2,08
2,07
2,03
1,99
1,94
2,48
2,45
2,39
2,33
2,49
2,43
2,38
3,21
3,16
3,09
3,00
4,07
4,02
3,94
3,86
3,31
3,26
3,19
3,10
4,20
4,14
4,07
3,98
3,88
3,73
6,23
6,16
6,07
5,97
5,82
8,30
8,23
8,14
8,04
7,89
8,39
8,29
8,14
10,50
10,40
10,20
Plastic Modulus
x-y
cm3
4,66
4,96
5,40
5,82
7,71
8,72
9,44
11,20
13,40
14,50
17,40
18,40
22,20
28,90
21,50
23,50
28,40
34,00
40,50
24,30
29,30
38,50
46,00
38,30
50,70
61,00
61,70
74,60
89,5
105
99,50
121
147
175
94,10
115
139
165
151
185
227
272
322
381
334
413
501
601
727
525
653
796
964
1180
1207
1471
1815
1653
2021
2508
S
y-y
cm3
3,42
3,63
3,93
4,21
6,10
6,86
7,39
8,67
8,86
9,56
11,30
13,10
15,60
20,00
14,40
15,60
18,70
22,00
25,70
18,20
21,80
28,20
33,30
25,60
33,30
39,40
48,8
58,4
69,40
80,00
79,10
95,9
115
136
62,8
75,60
90,20
105
102
124
149
176
204
235
252
309
371
441
526
422
522
633
762
924
814
982
1195
1192
1448
1780
x-y
cm3
y-y
cm3
5,80
6,21
6,81
7,39
9,43
10,70
11,70
14,1
16,70
18,30
22,20
22,70
27,60
36,60
26,70
29,20
35,70
43,30
52,50
29,50
36,00
48,10
58,40
47,60
63,90
78,00
75,40
92,30
113
134
121
148
183
220
117
144
177
213
186
231
286
346
417
505
405
505
618
751
924
627
785
964
1179
1462
1492
1831
2285
2013
2478
3103
4,02
4,30
4,70
5,08
7,09
8,05
8,75
10,50
10,20
11,10
13,40
15,00
18,10
23,90
16,40
17,90
21,70
26,10
31,30
20,70
25,10
33,30
40,20
29,20
38,80
46,90
56,70
69,10
83,90
99,40
90,80
111
137
164
71,70
87,70
107
127
115
141
174
209
249
297
284
353
430
520
635
475
593
726
886
1094
916
1120
1388
1338
1642
2047
Torsional Constants
J
cm4
cm3
11,3
12,1
13,2
14,2
25,0
28,4
30,8
36,6
42,5
46,1
55,1
74,2
89,3
116,0
85,7
93,3
113,0
135,0
160,0
118,0
142,0
187,0
224,0
183,0
242,0
290,0
401
486
586
688
806
985
1202
1431
599
729
882
1041
1202
1473
1802
2154
2541
2988
4049
5014
6082
7317
8863
8468
10549
12890
15654
19227
19236
23408
28835
33247
40668
50478
5,57
5,90
6,37
6,81
9,74
10,9
11,8
13,7
14,9
16,1
18,9
21,8
25,9
32,9
24,4
26,4
31,4
37,0
43,0
29,8
35,6
45,9
53,9
43,3
56,0
66,0
77,9
93,0
110
126
127
153
184
215
106
127
151
175
172
208
251
296
342
393
413
506
606
717
851
681
840
1016
1217
1469
1377
1657
2011
1986
2407
2948
Superficial Approx.
Area per m Length
per t
m2
0,155
0,154
0,154
0,153
0,195
0,194
0,193
0,191
0,234
0,233
0,231
0,274
0,272
0,269
0,294
0,293
0,291
0,289
0,286
0,314
0,312
0,309
0,306
0,352
0,349
0,348
0,389
0,386
0,383
0,379
0,489
0,486
0,483
0,479
0,469
0,466
0,463
0,459
0,589
0,586
0,583
0,579
0,573
0,566
0,786
0,783
0,779
0,773
0,766
0,986
0,983
0,979
0,973
0,966
1,180
1,170
1,170
1,380
1,370
1,370
356
331
299
274
270
235
215
175
194
177
144
165
135
99,1
154
140
113
91,8
74,7
144
117
85,5
69,5
103
75,2
61,0
67,6
54,4
43,7
35,9
53,5
43,0
34,4
28,1
55,6
44,9
35,9
29,3
44,1
35,4
28,3
23,0
18,8
15,1
26,2
20,9
16,9
13,7
11,0
20,8
16,6
13,4
10,8
8,55
11,1
8,93
7,05
9,44
7,58
5,99
39
30.11.2007
10:04 Uhr
Seite 40
SWG
SWG
M/W
A/W
mm
mm
25,00 25,00
0,508 0,508
BWG
M/W
mm
25,00
0,507
3/16"
4.76 mm
1/4"
6.35 mm
3/8"
9.53 mm
1/2"
12.7mm
5/8"
15,88 mm
3/4"
19,05 mm
7/8"
22,2 mm
1"
25.4 mm
1 1/16"
26,99 mm
1 1/8"
28,58 mm
1 1/4"
31.75 mm
1 1/2"
38,1 mm
1 3/4"
44.45 mm
2"
50.8 mm
2 1/4"
57.15 mm
2 1/2"
63.5 mm
2 3/4"
69.85 mm
3"
76,2 mm
0,058 0,053
0,058
0,053
0,068 0,062
0,075
0,080 0,073
0,080
0,073
0,095 0,086
0,125
0,113
0,125
0,113
0,148 0,134
0,169
0,153
0,169
0,152
0,201 0,182
WT
SWG
SWG
M/W
A/W
mm
mm
13,00 13,00
2,337 2,337
BWG
M/W
mm
13,00
2,413
0,647
OD
OD
1/2"
12,7 mm
5/8"
15,88 mm
3/4"
19,05 mm
7/8"
22,2 mm
1"
25,4 mm
1 1/16"
26,99 mm
1 1/8"
28,58 mm
1 1/4"
31,75 mm
1 1/2"
38,1 mm
1 3/4"
44,45 mm
2"
50,8 mm
2 1/4"
57,15 mm
2 1/2"
63,5 mm
2"
50.8 mm
2 3/4"
69,85 mm
3"
76,2 mm
3 1/4"
82,55 mm
3 1/2"
95,25 mm
4"
101,6 mm
40
BWG
A/W
mm
13,00
2,413
SWG
M/W
mm
22,00
0,711
SWG
A/W
mm
22,00
0,711
BWG
M/W
mm
22,00
0,711
BWG
A/W
mm
22,00
0,711
SWG
M/W
mm
21,00
0,813
SWG
A/W
mm
21,00
0,813
BWG
M/W
mm
21,00
0,812
BWG
A/W
mm
21,00
0,812
SWG
M/W
mm
20,00
0,914
SWG
A/W
mm
20,00
0,914
BWG
M/W
mm
20,00
0,889
0,065
0,077
0,071
0,077
0,071
0,086
0,079
0,086
0,079
0,094
0,087
0,092
0,098
0,089
0,108
0,099
0,108
0,099
0,121
0,111
0,121
0,111
0,133
0,123
0,131
0,153
0,139
0,170
0,155
0,170
0,155
0,192
0,175
0,192
0,175
0,213
0,194
0,208
0,208
0,189
0,232
0,210
0,232
0,210
0,262
0,238
0,262
0,238
0,292
0,266
0,285
0,372
0,337
0,362
0,451
0,409
0,440
BWG
A/W
mm
10,00
3,403
SWG
M/W
mm
9,00
3,658
SWG
A/W
mm
9,00
3,658
BWG
A/W
mm
23,00
0,634
BWG
A/W
mm
12,00
2,768
SWG
M/W
mm
11,00
2,947
SWG
A/W
mm
11,00
2,947
BWG
M/W
mm
11,00
3,048
BWG
A/W
mm
11,00
3,048
SWG
M/W
mm
10,00
3,251
SWG
A/W
mm
10,00
3,251
1,657
1,521
BWG
M/W
mm
10,00
3,403
BWG
M/W
mm
9,00
3,760
0,597
0,662
0,612
0,850 0,780
0,872
0,801
1,053 0,962
1,082
0,990
1,255
1,146
1,290
1,179
1,523
1,401
1,523
1,441
1,459 1,329
1,502
1,368
1,780
1,632
1,835
1,680
1,940
1,776
2,014
1,846
2,137
1,961
1,561
1,421
1,607
1,463
1,915
1,747
1,972
1,800
2,083
1,903
2,165
1,980
2,298
2,105
1,660
1,512
1,710
1,557
2,041
1,862
2,101
1,919
2,223
2,030
2,310
2,112
2,455
2,248
1,865 1,695
1,921
1,764
1,979
2,290
2,093
2,365
2,157
2,505
2,285
2,607
2,379
2,772
2,534
2,836
1,111
1,579
2,268 2,061
2,341
2,124
2,801
2,555
2,894
2,635
3,071
2,794
3,199
2,912
3,408
3,107
3,489
2,676
2,759
2,502
3,311
3,015
3,423
3,112
3,636
3,303
3,791
3,445
4,044
3,680
4,142
2,427
3,084 2,793
3,180
2,879
3,822
3,478
3,953
3,589
4,201
3,812
4,380
3,978
4,680
4,253
4,795
3,490 3,159
3,596
3,256
4,332
3,939
4,482
4,066
4,765
4,321
4,975
4,510
4,332
3,939
5,450
3,896 3,525
4,020
3,635
4,843
4,401
5,011
4,544
5,332
4,830
5,567
5,044
5,951
5,398
6,101
4,302 3,891
4,436
4,013
5,353
4,862
5,541
5,021
5,897
5,339
6,159
5,576
6,587
5,971
6,757
4,708 4,257
4,859
4,391
5,864
5,323
6,070
5,499
6,462
5,848
6,751
6,109
7,223
6,544
7,411
5,115
4,623
5,278
4,768
6,394
5,785
6,599
5,976
7,027
6,356
7,343
6,642
7,858
7,116
8,064
5,521
4,989
5,698
5,145
6,885
6,246
7,129
6,453
7,593
6,866
7,935
7,175
8,494
7,689
8,713
7,395
6,708
7,657
6,930
8,158
7,375
8,526
7,708
9,130
8,262
9,370
30.11.2007
10:04 Uhr
Seite 41
BWG
A/W
mm
19
1,086
BWG
M/W
mm
18
1,219
SWG
A/W
mm
18
1,219
SWG
M/W
mm
18
1,244
BWG
A/W
mm
18
1,244
BWG
M/W
mm
16
1,626
SWG
A/W
mm
16
1,626
SWG
M/W
mm
16
1,651
BWG
A/W
mm
16
1,651
BWG
M/W
mm
15
1,829
SWG
A/W
mm
15
1,829
SWG
M/W
mm
15
1,828
BWG
A/W
mm
15
1,828
0,094
0,106
0,089
0,134
0,153
0,141
0,167
0,154
0,169
0,157
0,202
0,189
0,204
0,191
0,216
0,204
0,216
0,204
0,213
0,247
0,226
0,273
0,250
0,278
0,254
0,344
0,317
0,348
0,321
0,375
0,347
0,375
0,347
BWG
M/W
mm
14
2,032
SWG
A/W
mm
14
2,032
SWG
M/W
mm
14
2,108
BWG
A/W
mm
14
2,108
0,293 0,342
0,311
0,379
0,345
0,385
0,351
0,485
0,444
0,491
0,450
0,534
0,490
0,534
0,490
0,581
0,536
0,599
0,551
0,372
0,436
0,396
0,485
0,441
0,494
0,449
0,626
0,572
0,635
0,579
0,693
0,634
0,693
0,633
0,758
0,694
0,781
0,716
0,452 0,530
0,481
0,590
0,536
0,601
0,545
0,766
0,698
0,779
0,709
0,852
0,777
0,852
0,777
0,936
0,853
0,964
0,881
0,696
0,631
0,709
0,643
0,909
0,826
0,919
0,836
1,010
0,919
1,009
0,918
1,112
1,012
1,147
1,045
0,802
0,726
0,817
0,714
1,048
0,953
1,068
0,970
1,170
1,063
1,169
1,063
1,290
1,171
1,331
1,211
SWG
A/W
mm
8
40,64
SWG
M/W
mm
8
4,191
2,137
BWG
A/W
mm
8
4,191
BWG
M/W
mm
7
4,471
SWG
A/W
mm
7
4,471
SWG
M/W
mm
7
4,572
BWG
A/W
mm
7
4,572
2,192
2,775
3,108
2,848
3,411
3,836
3,505
4,055
3,708
4,133
3,780
4,047
4,564
4,161
4,833
4,408
4,928
4,496
4,684 5,292
4,817
5,610
5,108
5,717
5,212
5,320 6,022
5,473
6,387
5,808
6,517
5,928
5,957
6,751
6,130
7,164
6,508
7,312
6,644
6,593
7,479
6,786
7,941
7,208
8,106
7,36
7,229
8,208
7,442
8,718
7,908
8,901
8,076
7,866
8,933
8,098
9,496
8,608
9,696
8,792
8,502 9,661
1,121
1,017
1,137
1,032
1,251
1,135
1,250
1,134
1,377
1,251
1,424
1,294
1,193
1,081
1,210
1,097
1,331
1,207
1,329
1,206
1,466
1,330
1,514
1,376
1,333
1,208
1,350
1,225
1,487
1,349
1,487
1,349
1,644
1,489
1,697
1,541
1,615
1,462
1,637
1,483
1,805
1,636
1,805
1,636
1,998
1,807
2,064
1,871
2,351
2,126
2,430
2,201
2,704
2,444
2,796
2,531
3,054
2,762
3,163
2,861
3,407
3,080
3,529
3,192
3,761
3,399
3,896
3,522
4,121
3,716
4,262
3,852
WT
OD
3/16"
4.76 mm
1/4"
6.35 mm
3/8"
9.53 mm
1/2"
12.7mm
5/8"
15,88 mm
3/4"
19,05 mm
7/8"
22,2 mm
1"
25.4 mm
1 1/16"
26,99 mm
1 1/8"
28,58 mm
1 1/4"
31.75 mm
1 1/2"
38,1 mm
1 3/4"
44.45 mm
2"
50.8 mm
2 1/4"
57.15 mm
2 1/2"
63.5 mm
2 3/4"
69.85 mm
3"
76,2 mm
WT
OD
1/2"
12,7 mm
5/8"
15,88 mm
3/4"
19,05 mm
7/8"
22,2 mm
1"
25,4 mm
1 1/16"
26,99 mm
1 1/8"
28,58 mm
1 1/4"
31,75 mm
1 1/2"
38,1 mm
1 3/4"
44,45 mm
2"
50,8 mm
2 1/4"
57,15 mm
2 1/2"
63,5 mm
2"
50.8 mm
2 3/4"
69,85 mm
3"
76,2 mm
3 1/4"
82,55 mm
3 1/2"
95,25 mm
4"
101,6 mm
Weights in kg/m
Conversion Factors
Carbon Steel
1.057
1.082
1.133
1.133
Stainless steel
1.015
UNS N04400
1.125
UNS N06600
1.073
UNS N08800
1.013
UNS N08810
1.013
UNS N08825
1.037
UNS N0N10665
1.174
UNS N0N06455
1.131
41
SWG
A/W
mm
19
1,016
30.11.2007
10:04 Uhr
Seite 42
Outside diameter
22
inches
mm
20
18
16
14
12
11
10
in.
0,028
mm
0,711
in.
0,36
mm
0,914
in.
0,048
mm
1,218
in.
0,064
mm
1,625
in.
0,080
mm
2,032
in.
0,104
mm
2,641
in.
0,116
mm
2,946
in.
0,128
mm
3,251
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
lb/ft
kg/m
1/4
6,350
7,950
9,525
5/16
3/8
1/2
12,700
0,143
0,213 0,181
15,875
0,181
5/8
3/4
19,050
0,732 1,09
0,800 1,19
0,867
1,29
7/8
22,225
0,257 0,383 0,328 0,488 0,431 0,641 0,563 0,838 0,692 1,03
0,874 1,30
0,954 1,42
1,040
1,55
25,400
1,02
1,51
1,12
1,66
1,210
1,80
31,750
1,020 1,51
1,30
1,93
1,43
2,13
1,560
2,32
38,100
0,994 1,48
1,240 1,84
1,58
2,35
1,74
2,59
1,910
2,84
44,450
1,170 1,74
1,450 2,16
1,86
2,77
2,06
3,06
2,250
3,35
50,800
1,020 1,51
1,340 2,00
1,670 2,48
2,14
3,19
2,37
3,53
2,600
3,87
63,500
1,280 1,90
1,690 2,52
2,100 3,13
2,71
4,03
3,00
4,47
3,300
4,91
76,200
1,540 2,29
2,000 3,03
2,530 3,77
3,27
4,87
3,63
5,40
3,990
5,94
88,900
1,790 2,67
2,390 3,55
2,970 4,42
3,83
5,70
4,26
6,34
4,680
6,97
101,600
2,060 3,06
2,740 4,07
3,410 5,07
4,40
6,54
4,89
7,28
5,380
8,01
1,00
1,25
1,5
1,75
2,00
2,5
3,00
3,5
4,00
42
30.11.2007
10:04 Uhr
Seite 43
in.
Decimals
20
Millimeters
in.
18
16
12
11
10
in.
0,35
mm
0,889
in.
0,049
mm
1,245
in.
0,065
mm
1,654
in.
0,072
mm
1,829
in.
0,083
mm
2,108
in.
0,095
mm
2,413
in.
0,109
mm
2,769
in.
0,120
mm
3,048
in.
0,134
mm
3,40
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
lbs/ft
kg/m
1/4
0,250
6,350
5/16
0,313
7,950
3/8
0,375
9,525
0,130 0,190 0,170 0,250 0,210 0,310 0,230 0,340 0,260 0,390
0,5
0,500
12,700
0,170 0,250 0,230 0,340 0,300 0,450 0,330 0,490 0,370 0,550 0,410 0,610 0,460 0,680 0,480 0,720
5/8
0,625
15,875
0,220 0,330 0,300 0,450 0,390 0,580 0,430 0,640 0,480 0,710 0,540 0,800 0,600 0,890 0,650 0,970
3/4
0,750
19,050
0,270 0,400 0,370 0,550 0,480 0,720 0,520 0,770 0,590 0,880 0,660 0,980 0,750 1,120 0,810 1,200 0,880 1,310
7/8
0,875
22,225
0,310 0,460 0,430 0,640 0,560 0,830 0,620 0,920 0,700 1,040 0,790 1,180 0,890 1,320 0,970 1,440 1,060 1,580
1,000
25,400
0,360 0,540 0,500 0,740 0,650 0,970 0,710 1,060 0,810 1,210 0,920 1,370 1,040 1,550 1,130 1,680 1,290 1,920
1,125
1,125
28,575
0,410 0,610 0,560 0,830 0,740 1,100 0,810 1,210 0,920 1,370 1,050 1,560 1,180 1,760 1,290 1,920 1,420 2,110
1,25
1,250
31,750
0,460 0,680 0,630 0,940 0,830 1,230 0,910 1,350 1,030 1,530 1,180 1,760 1,320 1,960 1,450 2,160 1,610 2,400
1,375
1,375
34,925
0,500 0,740 0,690 1,030 0,910 1,350 1,000 1,490 1,140 1,700 1,300 1,930 1,470 2,190 1,610 2,400 1,780 2,650
1,5
1,500
38,100
0,550 0,820 0,760 1,130 1,000 1,490 1,100 1,640 1,260 1,870 1,460 2,170 1,610 2,400 1,770 2,630 1,960 2,920
1,75
1,750
44,450
0,650 0,970 0,890 1,320 1,170 1,740 1,290 1,920 1,480 2,200 1,680 2,500 1,910 2,840 2,080 3,100 2,310 3,440
2,000
50,800
1,020 1,520 1,340 1,990 1,480 2,200 1,700 2,530 1,940 2,890 2,200 3,270 2,410 3,590 2,670 3,970
2,25
2,250
57,150
1,160 1,730 1,520 2,260 1,670 2,480 1,930 2,870 2,190 3,260 2,490 3,700 2,730 4,060 3,030 4,510
2,375
2,375
60,325
1,220 1,810 1,600 2,380 1,770 2,630 2,030 3,020 2,310 3,440 2,640 3,930 2,890 4,300 3,210 4,780
2,5
2,500
63,500
1,280 1,910 1,690 2,520 1,870 2,780 2,140 3,180 2,460 3,660 2,780 4,140 3,050 4,540 3,390 5,040
2,875
2,875
73,025
1,480 2,200 1,950 2,900 2,150 3,200 2,470 3,680 2,820 4,200 3,220 4,790 3,530 5,250 3,920 5,830
3,000
76,200
1,550 2,310 2,040 3,040 2,250 3,350 2,590 3,850 2,950 4,390 3,360 5,000 3,690 5,490 4,100 6,100
3,5
3,500
88,900
1,810 2,690 2,390 3,560 2,640 3,930 3,030 4,510 3,460 5,150 3,940 5,860 4,330 6,440 4,820 7,170
4,000
101,600
2,760 4,110 3,050 4,540 3,500 5,210 4,000 5,950 4,570 6,800 5,020 7,470 5,580 8,300
+ The values in pounds and kilograms shown in this table are based on weights of carbon steel.
43
Outside diameter
Fractions
30.11.2007
10:04 Uhr
Seite 44
Size
Material
Cu/Ni 90/10 - Cu/Ni 70/30
Min. Wall
3/4" x 12 BWG
12 SWG
13 BWG
13 SWG
14 BWG
14 SWG
15 BWG
15 SWG
16 BWG
16 SWG
18 BWG
18 SWG
19 BWG
19 SWG
20 BWG
20 SWG
1 x 10 BWG
10 SWG
11 BWG
11 SWG
12 BWG
12 SWG
13 BWG
13 SWG
14 BWG
14 SWG
15 BWG
15 SWG
16 BWG
16 SWG
18 BWG
18 SWG
19 BWG
19 SWG
20 BWG
20 SWG
10 x
1 mm
12 x
1 mm
12 x 1,5 mm
14 x
1 mm
14 x 1,5 mm
16 x
1 mm
16 x 1,5 mm
18 x
1 mm
18 x 1,5 mm
20 x
2 mm
20 x 2,5 mm
22 x
2 mm
22 x 2,5 mm
25 x
2 mm
25 x 2,5 mm
1,338
1,287
1,192
1,160
1,060
1,027
0,935
0,935
0,853
0,841
0,658
0,645
0,579
0,544
0,479
0,492
2,223
2,138
2,023
1,965
1,860
1,785
1,647
1,601
1,458
1,410
1,280
1,280
1,165
1,148
0,892
0,875
0,784
0,736
0,647
0,665
0,267
0,327
0,468
0,386
0,557
0,446
0,646
0,505
0,735
1,069
1,299
1,188
1,448
1,366
1,671
Aver. Wall
1,280
1,231
1,140
1,109
1,014
0,982
0,894
0,894
0,816
0,805
0,629
0,617
0,554
0,520
0,458
0,471
2,126
2,045
1,935
1,879
1,779
1,708
1,575
1,531
1,394
1,349
1,224
1,224
1,114
1,098
0,853
0,837
0,750
0,704
0,619
0,636
0,256
0,312
0,447
0,369
0,533
0,426
0,618
0,483
0,703
1,022
1,243
1,136
1,385
1,306
1,598
Material
Aluminium Brass
Min. Wall
Material
Admiraltry Brass
Aver. Wall
Min. Wall
1,194
1,149
1,064
1,035
0,946
0,916
0,834
0,835
0,761
0,751
0,587
0,576
0,517
0,485
0,428
0,439
1,984
1,908
1,805
1,753
1,660
1,593
1,470
1,428
1,301
1,258
1,142
1,142
1,039
1,024
0,796
0,781
0,700
0,657
0,577
0,593
0,239
0,292
0,417
0,345
0,497
0,398
0,576
0,451
0,656
0,954
1,159
1,060
1,292
1,219
1,491
1,275
1,227
1,136
1,105
1,011
0,978
0,891
0,891
0,813
0,802
0,627
O,615
0,552
0,519
0,457
0,469
2,118
2,038
1,928
1,873
1,773
1,702
1,570
1,525
1,390
1,344
1,219
1,220
1,110
1,094
0,850
0,834
0,747
0,701
0,617
0,633
0,255
0,311
0,446
0,368
0,531
0,425
0,616
0,481
0,700
1,019
1,238
1,132
1,380
1,302
1,592
1,248
1,201
1,112
1,082
0,989
0,958
0,872
0,872
0,796
0,785
0,614
0,602
0,540
0,507
0,447
0,459
2,074
1,995
1,887
1,833
1,735
1,666
1,536
1,493
1,360
1,315
1,194
1,194
1,086
1,071
0,832
0,817
0,731
0,686
0,604
0,620
0,249
0,305
0,436
0,360
0,519
0,416
0,602
0,471
0,686
0,997
1,212
1,108
1,350
1,274
1,558
Aver. Wall
1,217
1,170
1,084
1,055
0,964
0,934
0,850
0,850
0,776
0,765
0,598
0,587
0,527
0,495
0,436
0,448
2,021
1,944
1,839
1,787
1,691
1,623
1,498
1,455
1,326
1,282
1,163
1,164
1,059
1,044
0,811
0,796
0,713
0,669
0,588
0,604
0,243
0,297
0,425
0,351
0,506
0,405
0,587
0,459
0,668
0,972
1,181
1,080
1,316
1,242
1,519
Av
0,0265
0,0270
0,0284
0,0284
0,0275
0,0281
0,0295
0,0295
Weight formula: [O.D. (mm) - W.T. (mm)] x W.T. (mm) x weight factor = kg/meter
44
30.11.2007
10:04 Uhr
Seite 45
ASTM 1
A213/
A199 T5
ASTM-A213
ASTM
A 214 TP304L TP316L TP321 TP316Ti AL687
ASTM-B111
Tube OD
in mm
Thickness
in mm
15,88
1,22
15,88
1,63
19,05
1,22
19,05
1,65
19,05
2,11
19,05
2,77
19,05
3,403
25,40
1,65
25,40
2,03
25,40
2,11
25,40
2,41
25,40
2,77
25,40
3,048
5/8
18 SWG
5/8
16 SWG
3/4
18 SWG
3/4
16 BWG
3/4
14 BWG
3/4
12 BWG
3/4
10 BWG
16 BWG
14 SWG
14 BWG
13 BWG
12 BWG
11 BWG
10BWG
25,40
3,403
9BWG
25,40
3,76
1 1/4
10BWG
31,75
3,403
1 1/2
10BWG
38,10
3,403
20mm2
2,0mm
20,00
2,00
25mm2
2,0mm
25,00
2,00
25mm2
2,5mm
25,00
2,50
G
G
G
G
G
G
G
G
Average Wallthickness
CuNi 90/10
CuNi70/30
45
46
18"
20"
22"
24"
DN 500
DN 550
DN 600
DN 350
DN 450
14"
DN 300
16"
12"
DN 250
DN 400
8"
10"
DN 200
6"
3-1/2"
DN 90
5"
3"
DN 80
DN 150
2-1/2"
DN 65
DN 125
2"
DN 50
33,4
141,3
114,3
101,6
88,9
73,02
60,32
48,26
42,16
219,07
24,000
22,000
20,000
18,000
16,000
14,000
609,6
558,8
508
457,2
406,4
355,6
12,750 323,85
10,750 273,05
8,625
6,625 168,27
5,563
4,500
4,000
3,500
2,87
2,375
1,900
21,34
26,67
0,065
0,218
0,188
0,188
0,165
0,165
0,156
0,156
0,134
0,109
0,109
0,109
0,083
0,083
0,083
0,083
0,065
0,065
0,065
0,065
0,065
5,54
4,78
4,78
4,19
4,19
3,96
3,96
3,4
2,77
2,77
2,77
2,11
2,11
2,11
2,11
1,65
1,65
1,65
1,65
1,65
1,65
SCH 5S
(mm)
47,415
37,521
34,081
26,894
23,878
19,73
17,948
12,99
8,4891
6,4954
5,4369
3,354
2,9743
2,5946
2,1199
1,3716
1,0897
0,947
0,7423
0,5849
0,4603
(kg/m)
0,250
0,218
0,218
0,188
0,188
0,188
0,180
0,165
0,148
0,134
0,134
0,120
0,120
0,120
0,120
0,109
0,109
0,109
0,109
0,083
0,083
6,35
5,54
5,54
4,78
4,78
4,78
4,57
4,19
3,76
3,4
3,4
3,05
3,05
3,05
3,05
2,77
2,77
2,77
2,77
2,11
2,11
54,275
43,428
39,44
30,641
27,2
23,76
20,674
15,961
11,47
7,9423
6,6431
4,8076
4,2588
3,7099
3,0237
2,2587
1,7853
1,5459
1,2021
0,7342
0,5749
0,3752
0,365
0,322
0,2799
0,2579
0,237
0,226
0,2161
0,2031
0,1539
0,1449
0,1402
0,1331
0,113
0,1091
9,53
9,27
8,18
7,11
6,55
6,02
5,74
5,49
5,16
3,91
3,68
3,56
3,38
2,87
2,77
42,442
34,646
24,442
16,235
12,505
9,2357
7,7961
6,4881
4,9612
3,1251
2,3244
1,947
1,4377
0,9678
0,7288
0,5
0,5
0,5
0,4319
0,3752
0,337
0,3181
0,3
0,276
0,2181
0,2
0,1909
0,179
0,1539
0,1469
(inch)
12,7
12,7
12,7
10,97
9,53
8,56
8,08
7,62
7,01
5,54
5,08
4,85
4,55
3,91
3,73
SCH.80S
(mm)
55,989
46,848
37,134
24,449
17,792
12,824
10,706
8,7754
6,5562
4,2999
3,1079
2,5639
1,8599
1,2609
0,9307
(kg/m)
10:04 Uhr
4"
1-1/2"
DN 40
1,660
1,315
1,050
0,840
OUTSIDE DIAMETER
(inch)
(mm)
(inch)
30.11.2007
DN 100
1"
1-1/4"
DN 32
DN 20
DN 25
1/2"
3/4"
DN 15
NOMINALE NPS
Design.
Standard weight
1-3/4" 44,45
2"
50,8
0,271
38,1
0,225
31,75
0,179
0,156
1-1/2"
7/8"
0,133
1-1/4"
22,225
3/4"
0,111
0,088
25,4
19,05
5/8"
0,065
1"
12,7
15,875
1/2"
9,525
0,397
0,347
0,297
0,247
0,196
0,171
0,146
0,121
0,096
0,071
0,451
0,394
0,337
0,280
0,223
0,194
0,166
0,137
0,109
0,080
0,505
0,441
0,377
0,313
0,249
0,217
0,185
0,153
0,121
0,089
0,629
0,549
0,469
0,389
0,309
0,269
0,229
0,189
0,149
0,109
0,751
0,655
0,559
0,463
0,368
0,320
0,272
0,224
0,176
0,128
0,873
0,762
0,650
0,538
0,426
0,370
0,314
0,258
0,202
1,150
1,001
0,853
0,704
0,556
0,481
0,407
1,454
1,265
1,075
0,885
0,696
0,601
0,506
BWG 16
BWG 14
(mm)
(inch) (mm)
1,651 0,083 2,108
0,333
(inch)
0,065
10:04 Uhr
3/8"
BWG 25
(inch)
(mm)
0,02
0,508
30.11.2007
OUTSIDE
DIAMETER
(inch)(mm)
47
30.11.2007
10:04 Uhr
Seite 48
Section Tubes
Electrically welded precision tubes
Rectangular or square cross section
weight
kg/m
size
mm
weight
kg/m
10 x 10 x 1
0,28
30 x 15 x 3
1,84
10 x 10 x1,5
0,40
30 x 20 x 1
0,75
12 x 12 x 1
0,35
30 x 20 x 1,5
1,10
12 x 12 x 1,5
0,49
30 x 20 x 2
1,44
15 x 15 x 1
0,44
30 x 20 x 2,5
1,76
15 x 15 x 1,5
0,63
30 x 20 x 3
1,92
15 x 15 x 2
0,81
30 x 25 x 1,5
1,22
16 x 16 x 1,5
0,67
30 x 25 x 2
1,59
16 x 16 x 2
0,85
30 x 25 x3
2,16
18 x 18 x 1,5
0,77
30 x 30 x 1
0,91
18 x 18 x 2
1,00
30 x 30 x 1,5
1,34
20 x 10 x 1
0,44
30 x 30 x 2
1,75
20 x 10 x 1,5
0,63
30 x 30 x 2,5
2,15
20 x 10 x 2
0,81
30 x 30 x 3
2,39
20 x 15 x 1,5
0,75
30 x 30 x 4
3,32
20 x 15 x 2
0,97
32 x 32 x 1.5
1,44
20 x 20 x 1
0,60
32 x 32 x 2
1,88
20 x 20 x 1,5
0,87
34 x 15 x 2
1,41
20 x 20 x 2
1,12
34 x 20 x 1,5
1,20
20 x 20 x 2,5
1,33
34 x 20 x 2
1,56
20 x 20 x 3
1,60
34 x 34 x 1,5
1,53
22 x 22 x 1,5
0,95
34 x 34 x 2
2,00
22 x 22 x 2
1,23
34 x 34 x 3
2,77
25 x 10 x 1,5
0,75
35 x 10 x 1,5
0,99
25 x 10 x 2
0,97
35 x 10 x 2
1,28
25 x 15 x 1,5
0,87
35 x 15 x 1,5
1,10
25 x 15 x 2
1,12
35 x 15 x 2
1,44
25 x 20 x 1,5
0,99
35 x 20 x 1,5
1,22
25 x 20 x 2
1,28
35 x 20 x 2
1,59
25 x 25 x 1
0,75
35 x 25 x 1,5
1,34
25 x 25 x 1,5
1,10
35 x 25 x 2
1,75
25 x 25 x 2
1,44
35 x 25 x 3
2,39
25 x 25 x 2,5
1,76
35 x 35 x 1.5
1,57
25 x 25 x 3
1,92
35 x 35 x 2
2,07
28 x 28 x 2
1,63
35 x 35 x 2,5
2,54
30 x 10 x 1
0,60
35 x 35 x 3
2,86
30 x 10 x 1,5
0,87
35 x 35 x 4
3,79
30 x l0 x 2
1,12
38 x 38 x 2
2,26
30 x 15 x 1
0,67
38 x 38 x 3
3,30
30 x 15 x 1,5
0,99
40 x 10 x 1,5
1,10
30 x 15 x 2
1,28
40 x 10 x 2
1,44
48
30.11.2007
10:04 Uhr
Seite 49
Section Tubes
Electrically welded precision tubes
Rectangular or square cross section
40 x 15 x 1,5
40 x 15 x 2
40 x 20 x 1
40 x 20 x 1,5
40 x 20 x 2
40 x 20 x 2,5
40 x 20 x 3
40 x 25 x 1,5
40 x 25 x 2
40 x 25 x 3
40 x 30 x 1,5
40 x 30 x 2
40 x 30 x 3
40 x 30 x 4
40 x 40 x 1,5
40 x 40 x 2
40 x 40 x 2,5
40 x 40 x 3
40 x 40 x 4
40 x 40 x 5
45 x 15 x 1,5
45 x 20 x 1,5
45 x 20 x 2
45 x 25 x 1,5
45 x 25 x 2
45 x 30 x 2
45 x 35 x 2
45 x 45 x 2
45 x 45 x 3
45 x 45 x 4
50 x 10 x 1,5
50 x 10 x 2
50 x 15 x 1,5
50 x 15 x 2
50 x 20 x 1,5
50 x 20 x 2
50 x 20 x 3
50 x 25 x 1,5
50 x 25 x 2
50 x 25 x 3
50 x 30 x 1,5
50 x 30 x 2
50 x 30 x 2,5
50 x 30 x 3
50 x 30 x 4
50 x 34 x 1,5
50 x 34 x 2
50 x 35 x 2
50 x 35 x 3
weight
kg/m
1,22
1,59
0,91
1,34
1,75
2,15
2,39
1,46
1,91
2,63
1,57
2,07
2,86
3,79
1,81
2,38
2,93
3,33
4,25
5,50
1,34
1,46
1,91
1,57
2,07
2,22
2,38
2,69
3,80
4,88
1,34
1,75
1,46
1,91
1,57
2,07
2,86
1,69
2,22
3,10
1,81
2,38
2,93
3,33
4,25
1,90
2,51
2,54
3,57
size
mm
50 x 40 x 1,5
50 x 40 x 2
50 x 40 x 3
50 x 40 x 4
50 x 50 x 1,5
50 x 50 x 2
50 x 50 x 2,5
50 x 50 x 3
50 x 50 x 4
50 x 50 x 5
55 x 34 x 2
55 x 55 x 2
55 x 55 x 3
55 x 55 x 4
60 x 15 x 2
60 x 20 x 1,5
60 x 20 x 2
60 x 20 x 3
60 x 25 x 2
60 x 25 x 3
60 x 30 x 1,5
60 x 30 x 2
60 x 30 x 2,5
60 x 30 x 3
60 x 30 x 4
60 x 34 x 2
60 x 35 x 2
60 x 35 x 3
60 x 40 x 1,5
60 x 40 x 2
60 x 40 x 2,5
60 x 40 x 3
60 x 40 x 4
60 x 40 x 5
60 x 45 x 2
60 x 50 x 2
60 x 50 x 3
60 x 50 x 4
60 x 60 x 1,5
60 x 60 x 2
60 x 60 x 2,5
60 x 60 x 3
60 x 60 x 4
60 x 60 x 5
65 x 65 x 2
65 x 65 x 3
65 x 65 x 4
67 x 35 x 2
70 x 20 x 2
size
mm
weight
kg/m
2,05
2,69
3,80
4,88
2,27
3,01
3,72
4,28
5,51
6,56
2,66
3,32
4,75
6,14
2,22
1,81
2,38
3,33
2,54
3,57
2,05
2,69
3,33
3,80
4,88
2,80
2,83
4,19
2,27
3,01
3,72
4,28
5,51
6,56
3,14
3,32
4,75
6,14
2,76
3,64
4,50
5,22
6,76
8,13
3,95
5,69
7,39
3,07
2,69
49
30.11.2007
10:04 Uhr
Seite 50
Section Tubes
Electrically welded precision tubes
Rectangular or square cross section
size
mm
70 x 30 x 2
70 x 30 x 3
70 x 30 x 4
70 x 35 x 2
70 x 35 x 3
70 x 40 x 2
70 x 40 x 3
70 x 40 x 4
70 x 40 x 5
70 x 50 x 2
70 x 50 x 3
70 x 50 x 4
70 x 50 x 5
70 x 70 x 2
70 x 70 x 3
70 x 70 x 4
70 x 70 x 5
75 x 75 x 2
80 x 20 x 2
80 x 20 x 3
80 x 30 x 2
80 x 30 x 3
80 x 30 x 4
80 x 34 x 2
80 x 40 x 2
80 x 40 x 2,5
80 x 40 x 3
80 x 40 x 4
80 x 40 x 5
80 x 50 x 2
80 x 50 x 3
80 x 50 x 4
80 x 50 x 5
80 x 60 x 2
80 x 60 x 3
80 x 60 x 4
80 x 60 x 5
80 x 80 x 2
80 x 80 x 3
80 x 80 x 4
8.0 x 80 x 5
90 x 20 x 2
90 x 30 x 2
90 x 40 x 3
90 x 40 x 4
90 x 45 x 3
90 x 50 x 3
90 x 50 x 4
90 x 50 x 5
50
weight
kg/m
3,01
4,28
5,51
3,14
4,48
3,32
4,75
6,14
7,34
3,64
5,22
6,76
8,13
4,26
6,16
8,02
9,70
4,58
3,01
4,28
3,32
4,75
6,14
3,45
3,64
4,50
5,22
6,76
8,13
3,95
5,69
7,39
8,91
4,26
6,16
8,02
9,70
4,89
7,10
9,28
11,30
3,32
3,64
5,69
7,39
5,90
6,16
8,02
9,70
size
mm
90 x 70 x 3
90 x 70 x 4
90 x 70 x 5
90 x 90 x 3
90 x 90 x 4
90 x 90 x 5
100 x 20 x 2
100 x 20 x 3
100 x 30 x 2
100 x 30 x 3
100 x 40 x 2
100 x 40 x 3
100 x 40 x 4
100 x 40 x 5
100 x 50 x 2
100 x 50 x 3
100 x 50 x 4
100 x 50 x 5
100 x 60 x 2
100 x 60 x 3
100 x 60 x 4
100 x 60 x 5
100 x 80 x 3
100 x 80 x 4
100 x 80 x 5
100 x 100 x 2
100 x 100 x 3
100 x 100 x 4
100 x 100 x 5
110 x 70 x 3
110 x 70 x 4
110 x 70 x 5
120 x 30 x 2
120 x 30 x 3
120 x 40 x 2
120 x 40 x 3
120 x 40 x 4
120 x 40 x 5
120 x 50 x 3
120 x 50 x 4
120 x 50 x 5
120 x 60 x 3
120 x 60 x 4
120 x 60 x 5
120 x 80 x 3
120 x 80 x 4
120 x 80 x 5
120 x 100 x 4
120 x 100 x 5
weight
kg/m
7,10
9,28
11,30
8,04
10,50
12,80
3,64
5,22
3,95
5,69
4,26
6,16
8,02
9,70
4,58
6,63
8,65
10,50
4,89
7,10
9,28
11,30
8,04
10,50
12,80
6,15
8,99
11,80
14,40
8,04
10,50
12,80
4,58
6,63
4,89
7,10
9,28
11,30
7,72
9,95
12,30
8,04
10,50
12,80
8,99
11,80
14,40
12,88
15,81
30.11.2007
10:04 Uhr
Seite 51
Wall
mm
10
11
12
mm
0,5
0,043
0,055
0,068
0,080
0,092
0,105
0,117
0,129
0,142
0,6
0,050
0,065
0,080
0,095
0,109
0,124
0,139
0,154
0,169
0,5
0,6
0,7
0,057
0,074
0,091
0,109
0,126
0,143
0,161
0,178
0,195
0,7
0,8
0,063
0,083
0,103
0,122
0,142
0,162
0,181
0,201
0,221
0,8
0,9
0,069
0,091
0,113
0,135
0,158
0,180
0,202
0,224
0,246
0,9
0,074
0,099
0,123
0,148
0,173
0,197
0,222
0,247
0,271
1,1
0,079
0,106
0,133
0,160
0,187
0,214
0,241
0,269
0,296
1,1
1,2
0,083
0,112
0,142
0,172
0,201
0,231
0,260
0,290
0,320
1,2
1,3
0,087
0,119
0,151
0,183
0,215
0,247
0,279
0,311
0,343
1,3
1,4
0,090
0,124
0,159
0,193
0,228
0,262
0,297
0,331
0,366
1,4
1,5
0,092
0,129
0,166
0,203
0,240
0,277
0,314
0,351
0,388
1,5
1,6
1,6
0,174
0,213
0,253
0,292
0,331
0,371
0,410
1,7
0,180
0,222
0,264
0,306
0,348
0,390
0,432
1,7
1,8
0,186
0,231
0,275
0,320
0,364
0,408
0,453
1,8
1,9
0,192
0,239
0,286
0,333
0,379
0,426
0,473
1,9
0,197
0,247
0,296
0,345
0,395
0,444
0,493
2,2
0,206
0,260
0,315
0,369
0,423
0,477
0,532
2,2
0,339
0,401
0,462
0,524
0,586
2,50
2,8
2,50
2,8
0,497
0,566
0,635
0,518
0,592
0,666
3,25
0,541
0,621
0,701
3,25
3,50
0,561
0,647
0,734
3,50
3,75
0,578
0,670
0,763
3,75
0,592
0,691
0,789
4,25
0,812
4,25
4,50
0,832
4,50
51
Outside diameter in mm
Wall
30.11.2007
10:04 Uhr
Seite 52
Outside diameter in mm
Wall
mm
13
14
15
16
17
18
19
20
21
Wall
mm
0,5
0,6
0,7
0,8
0,9
0,154
0,183
0,212
0,241
0,269
0,166
0,198
0,230
0,260
0,291
0,179
0,213
0,247
0,280
0,313
0,191
0,228
0,264
0,300
0,335
0,203
0,243
0,281
0,320
0,357
0,216
0,257
0,299
0,339
0,380
0,228
0,272
0,316
0,359
0,402
0,240
0,287
0,333
0,379
0,424
0,253
0,302
0,350
0,399
0,446
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
0,296
0,323
0,349
0,375
0,400
0,321
0,350
0,379
0,407
0,435
0,345
0,377
0,408
0,439
0,470
0,370
0,404
0,438
0,471
0,504
0,395
0,431
0,468
0,503
0,539
0,419
0,458
0,497
0,535
0,573
0,444
0,486
0,527
0,567
0,608
0,469
0,513
0,556
0,599
0,642
0,493
0,540
0,586
0,632
0,677
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
0,425
0,450
0,474
0,497
0,520
0,462
0,489
0,516
0,542
0,567
0,499
0,529
0,558
0,586
0,614
0,536
0,568
0,599
0,630
0,661
0,573
0,608
0,641
0,675
0,707
0,610
0,647
0,683
0,719
0,754
0,647
0,687
0,725
0,763
0,801
0,684
0,726
0,767
0,808
0,848
0,721
0,765
0,809
0,852
0,895
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
0,543
0,586
0,647
0,704
0,592
0,640
0,709
0,773
0,641
0,694
0,771
0,842
0,690
0,749
0,832
0,911
0,740
0,803
0,894
0,981
0,789
0,857
0,956
1,050
0,838
0,911
1,017
1,119
0,888
0,966
1,079
1,188
0,937
1,020
1,141
1,257
2
2,2
2,50
2,8
3
3,25
3,50
3,75
0,740
0,781
0,820
0,855
0,814
0,862
0,906
0,948
0,888
0,942
0,993
1,040
0,962
1,022
1,079
1,133
1,036
1,102
1,165
1,225
1,110
1,182
1,251
1,318
1,184
1,262
1,338
1,410
1,258
1,342
1,424
1,503
1,332
1,423
1,510
1,595
3
3,25
3,50
3,75
4
4,25
4,50
4,75
0,888
0,917
0,943
0,986
1,022
1,054
1,084
1,085
1,127
1,165
1,201
1,184
1,231
1,276
1,318
1,282
1,336
1,387
1,435
1,381
1,441
1,498
1,552
1,480
1,546
1,609
1,669
1,578
1,651
1,720
1,786
1,677
1,755
1,831
1,903
4
4,25
4,5
4,75
1,110
1,233
1,262
1,289
1,312
1,356
1,392
1,424
1,453
1,480
1,521
1,560
1,595
1,603
1,651
1,695
1,737
1,726
1,780
1,831
1,879
1,850
1,910
1,967
2,021
1,973
2,039
2,102
2,162
5
5,25
5,50
5,75
1,480
1,628
1,776
1,924
2,072
2,119
2,164
2,206
2,220
2,273
2,324
2,372
6
6,25
6,50
6,75
2,244
2,417
5
5,25
5,50
5,75
6
6,25
6,50
6,75
7
52
30.11.2007
10:04 Uhr
Seite 53
22
23
24
25
26
27
28
29
30
Wall
mm
0,5
0,6
0,7
0,8
0,9
0,265
0,317
0,368
0,418
0,468
0,277
0,331
0,385
0,438
0,490
0,290
0,346
0,402
0,458
0,513
0,302
0,361
0,419
0,477
0,535
0,314
0,376
0,437
0,497
0,557
0,327
0,391
0,454
0,517
0,579
0,339
0,405
0,471
0,537
0,601
0,351
0,420
0,489
0,556
0,624
0,364
0,435
0,506
0,576
0,645
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
0,518
0,567
0,616
0,664
0,711
0,543
0,594
0,645
0,696
0,746
0,567
0,621
0,675
0,728
0,780
0,592
0,648
0,704
0,760
0,815
0,617
0,675
0,734
0,792
0,849
0,641
0,703
0,763
0,824
0,884
0,666
0,730
0,793
0,856
0,918
0,690
0,757
0,823
0,888
0,953
0,715
0,784
0,852
0,920
0,987
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
0,758
0,805
0,851
0,897
0,942
0,795
0,844
0,893
0,941
0,989
0,832
0,884
0,935
0,985
1,035
0,869
0,923
0,977
1,030
1,082
0,906
0,963
1,019
1,074
1,129
0,943
1,002
1,061
1,119
1,176
0,98
1,042
1,103
1,163
1,223
1,017
1,081
1,144
1,207
1,270
1,054
1,121
1,186
1,252
1,317
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
0,986
1,074
1,202
1,326
1,036
1,129
1,264
1,395
1,085
1,183
1,325
1,464
1,134
1,237
1,387
1,533
1,184
1,291
1,449
1,602
1,233
1,346
1,510
1,671
1,282
1,400
1,572
1,740
1,332
1,454
1,634
1,809
1,381
1,508
1,695
1,878
2
2,2
2,50
2,8
3
3,25
3,50
3,75
1,406
1,503
1,597
1,688
1,480
1,583
1,683
1,780
1,554
1,663
1,769
1,873
1,628
1,743
1,856
1,965
1,702
1,823
1,942
2,056
1,776
1,903
2,028
2,150
1,850
1,984
2,115
2,243
1,923
2,064
2,201
2,335
1,997
2,144
2,287
2,427
3
3,25
3,50
3,75
4
4,25
4,50
4,75
1,776
1,860
1,942
2,021
1,874
1,965
2,053
2,138
1,973
2,070
2,164
2,255
2,071
2,175
2,275
2,372
2,170
2,280
2,386
2,489
2,269
2,384
2,497
2,606
2,367
2,489
2,608
2,723
2,466
2,594
2,719
2,841
2,565
2,699
2,830
2,958
4
4,25
4,50
4,75
5
5,25
5,50
5,75
2,096
2,169
2,238
2,304
2,219
2,298
2,374
2,446
2,343
2,427
2,509
2,588
2,466
2,557
2,645
2,730
2,589
2,686
2,780
2,871
2,713
2,816
2,916
3,013
2,836
2,945
3,052
3,155
2,959
3,075
3,187
3,297
3,083
3,204
3,323
3,439
5
5,25
5,50
5,75
6
6,25
6,50
6,75
2,368
2,428
2,485
2,539
2,515
2,582
2,645
2,705
2,663
2,736
2,805
2,872
2,811
2,890
2,966
3,038
2,959
3,044
3,126
3,204
3,107
3,198
3,286
3,371
3,255
3,352
3,446
3,537
3,403
3,506
3,607
3,704
3,551
3,660
3,767
3,870
6
6,25
6,50
6,75
7
7,25
7,50
7,75
2,589
2,762
2,935
3,107
3,174
3,237
3,297
3,280
3,325
3,422
3,488
3,453
3,531
3,607
3,679
3,625
3,710
3,792
3,870
3,798
3,889
3,977
4,061
3,971
4,068
4,162
4,253
7
7,25
7,50
7,75
3,354
3,551
3,749
3,946
4,088
4,217
4,143
4,297
4,439
4,340
4,507
4,661
4,803
8
8,50
9
9,50
8
8,50
9
9,50
10
4,932
10
53
Outside diameter in mm
Wall
mm
30.11.2007
10:04 Uhr
Seite 54
Outside diameter in mm
Wall
mm
32
33
34
35
36
37
38
39
Wall
mm
0,5
0,6
0,7
0,8
0,9
0,376
0,450
0,523
0,596
0,668
0,388
0,465
0,540
0,616
0,690
0,401
0,479
0,558
0,635
0,712
0,413
0,494
0,575
0,655
0,735
0,425
0,509
0,592
0,675
0,757
0,438
0,524
0,609
0,694
0,779
0,450
0,539
0,627
0,714
0,801
0,462
0,553
0,644
0,734
0,823
0,475
0,568
0,661
0,754
0,846
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
0,740
0,811
0,882
0,952
1,022
0,764
0,838
0,911
0,984
1,056
0,789
0,865
0,941
1,016
1,091
0,814
0,892
0,971
1,048
1,125
0,838
0,920
1,000
1,080
1,160
0,863
0,947
1,030
1,112
1,195
0,888
0,974
1,059
1,144
1,229
0,912
1,001
1,089
1,177
1,264
0,937
1,028
1,119
1,209
1,298
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
1,091
1,160
1,228
1,296
1,363
1,128
1,199
1,270
1,341
1,410
1,165
1,239
1,312
1,385
1,457
1,202
1,278
1,354
1,429
1,504
1,239
1,318
1,396
1,474
1,551
1,276
1,357
1,438
1,518
1,598
1,313
1,397
1,480
1,562
1,645
1,350
1,436
1,522
1,607
1,691
1,387
1,476
1,564
1,651
1,738
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
1,430
1,563
1,757
1,947
1,480
1,617
1,819
2,016
1,529
1,671
1,880
2,085
1,578
1,725
1,942
2,154
1,628
1,780
2,004
2,223
1,677
1,834
2,065
2,293
1,726
1,888
2,127
2,362
1,776
1,942
2,189
2,431
1,825
2,051
2,250
2,500
2
2,2
2,50
2,8
3
3,25
3,50
3,75
2,071
2,224
2,374
2,520
2,145
2,304
2,460
2,612
2,219
2,384
2,546
2,705
2,293
2,464
2,632
2,797
2,367
2,545
2,719
2,890
2,441
2,625
2,805
2,982
2,515
3,705
2,891
3,075
2,589
2,785
2,978
3,167
2,663
2,865
3,064
3,260
3
3,25
3,50
3,75
4
4,25
4,50
4,75
2,663
2,804
2,941
3,075
2,762
2,908
3,052
3,192
2,861
3,013
3,163
3,309
2,959
3,118
3,274
3,426
3,058
3,223
3,385
3,543
3,156
3,328
3,496
3,660
3,255
3,432
3,607
3,778
3,354
3,537
3,717
3,895
3,452
3,642
3,828
4,012
4
4,25
4,50
4,75
5
5,25
5,50
5,75
3,206
3,334
3,459
3,580
3,329
3,463
3,594
3,722
3,452
3,599
3,730
3,864
3,576
3,722
3,865
4,006
3,699
3,852
4,001
4,148
3,822
3,981
4,137
4,289
3,946
4,111
4,272
4,431
4,069
4,240
4,408
4,573
4,192
4,369
4,544
4,715
5
5,25
5,50
5,75
6
6,25
6,50
6,75
3,699
3,815
3,927
4,037
3,847
3,969
4,087
4,203
3,995
4,123
4,248
4,369
4,143
4,277
4,408
4,536
4,291
4,431
4,568
4,702
4,439
4,585
4,729
4,869
4,587
4,739
4,889
5,035
4,735
4,893
5,049
5,202
4,883
5,048
5,209
5,968
6
6,25
6,50
6,75
7
7,25
7,50
7,75
4,143
4,246
4,347
4,444
4,316
4,425
4,532
4,635
4,488
4,604
4,716
4,826
4,661
4,783
4,901
5,017
4,834
4,962
5,086
5,208
5,006
5,140
5,271
5,399
5,179
5,319
5,456
5,590
5,351
5,498
5,641
5,782
5,524
5,676
5,826
5,973
7
7,25
7,50
7,75
8
8,50
9
9,50
4,538
4,717
4,883
5,037
4,735
4,926
5,105
5,271
4,932
5,136
5,327
5,506
5,130
5,345
5,549
5,740
5,327
5,555
5,771
5,974
5,524
5,765
5,993
6,209
5,721
5,974
6,215
6,443
5,919
6,184
6,437
6,677
6,116
6,394
6,659
6,811
8
8,50
9
9,50
5,179
5,426
5,672
5,919
6,165
6,412
6,659
6,905
7,152
10
54
31
10
30.11.2007
10:04 Uhr
Seite 55
40
41
42
43
44
45
46
47
48
Wall
mm
0,5
0,6
0,7
0,8
0,9
0,487
0,583
0,678
0,773
0,868
0,499
0,598
0,696
0,793
0,890
0,512
0,613
0,713
0,813
0,912
0,524
0,627
0,730
0,833
0,934
0,536
0,642
0,747
0,852
0,957
0,549
0,657
0,765
0,872
0,979
0,561
0,672
0,782
0,892
1,001
0,573
0,687
0,799
0,911
1,023
0,586
0,701
0,817
0,931
1,045
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
0,962
1,055
1,148
1,241
1,333
0,986
1,082
1,178
1,273
1,367
1,011
1,109
1,207
1,305
1,402
1,036
1,136
1,237
1,337
1,436
1,060
1,164
1,267
1,369
1,471
1,085
1,191
1,296
1,401
1,505
1,110
1,218
1,326
1,433
1,540
1,134
1,245
1,355
1,465
1,574
1,159
1,272
1,385
1,497
1,609
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
1,424
1,515
1,606
1,696
1,785
1,461
1,555
1,648
1,740
1,832
1,498
1,594
1,689
1,784
1,879
1,535
1,633
1,731
1,829
1,926
1,572
1,673
1,773
1,873
1,973
1,609
1,712
1,815
1,918
2,019
1,646
1,752
1,857
1,962
2,066
1,683
1,791
1,899
2,006
2,113
1,720
1,831
1,941
2,051
2,160
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
1,874
2,051
2,312
2,569
1,923
2,105
2,374
2,638
1,973
2,159
2,435
2,707
2,022
2,214
2,497
2,776
2,071
2,268
2,558
2,845
2,121
2,322
2,620
2,914
2,170
2,376
2,682
2,983
2,219
2,431
2,743
3,052
2,269
2,485
2,805
3,121
2
2,2
2,50
2,8
3
3,25
3,50
3,75
2,737
2,945
3,150
3,352
2,811
3,025
3,237
3,445
2,885
3,106
3,323
3,537
2,959
3,186
3,409
3,630
3,033
3,266
3,496
3,722
3,107
3,346
3,582
3,815
3,181
3,426
3,668
3,907
3,255
3,506
3,754
4,000
3,329
3,586
3,841
4,092
3
3,25
3,50
3,75
4
4,25
4,50
4,75
3,551
3,747
3,939
4,129
3,650
3,852
4,050
4,246
3,748
3,956
4,161
4,363
3,847
4,061
4,272
4,480
3,946
4,166
4,383
4,598
4,044
4,271
4,494
4,715
4,143
4,376
4,605
4,832
4,242
4,480
4,716
4,949
4,340
4,585
4,827
5,066
4
4,25
4,50
4,75
5
5,25
5,50
5,75
4,316
4,499
4,679
4,856
4,439
4,628
4,815
4,998
4,562
4,758
4,950
5,140
4,685
4,887
5,086
5,282
4,809
5,017
5,222
5,424
4,932
5,146
5,357
5,565
5,055
5,276
5,493
5,707
5,179
5,405
5,629
5,849
5,302
5,535
5,764
5,991
5
5,25
5,50
5,75
6
6,25
6,50
6,75
5,031
5,202
5,370
5,535
5,179
5,356
5,530
5,701
5,327
5,510
5,690
5,868
5,475
5,664
5,851
6,034
5,622
5,818
6,011
6,200
5,770
5,972
6,171
6,367
6,918
6,126
6,331
6,533
6,066
6,281
6,492
6,700
6,214
6,435
6,652
6,866
6
6,25
6,50
6,75
7
7,25
7,50
7,75
5,696
5,855
6,011
6,164
5,869
6,034
6,196
6,355
6,042
6,213
6,381
6,546
6,214
6,392
6,566
6,737
6,387
6,570
6,751
6,928
6,560
6,749
6,936
7,119
6,732
6,928
7,121
7,310
6,905
7,107
7,306
7,501
7,077
7,285
7,490
7,692
7
7,25
7,50
7,75
8
8,50
9
9,50
6,313
6,603
6,881
7,146
6,511
6,813
7,102
7,380
6,708
7,022
7,324
7,614
6,905
7,232
7,546
7,849
7,103
7,442
7,768
8,083
7,299
7,651
7,990
8,317
7,497
7,861
8,212
8,551
7,694
8,071
8,434
8,786
7,891
8,280
8,656
9,020
8
8,50
9
9,50
7,398
7,867
8,286
7,645
8,138
8,582
7,892
8,410
8,878
8,138
8,681
9,174
8,385
8,952
9,470
8,632
9,223
9,766
8,878
9,495
10,06
9,125
9,766
10,36
9,371
10,04
10,65
10
11
12
10
11
12
55
Outside diameter in mm
Wall
mm
30.11.2007
10:04 Uhr
Seite 56
49
51
52
53
54
55
56
57
Wall
mm
0,5
0,6
0,7
0,8
0,9
0,598
0,716
0,834
0,951
1,068
0,610
0,731
0,851
0,971
1,090
1
1,1
1,2
1,3
1,4
1,184
1,299
1,414
1,529
1,643
1,208
1,326
1,444
1,561
1,678
1,233
1,354
1,474
1,593
1,712
1,258
1,381
1,503
1,625
1,747
1,282
1,408
1,533
1,657
1,781
1,307
1,435
1,562
1,689
1,816
1,332
1,462
1,592
1,722
1,850
1,356
1,489
1,622
1,754
1,885
1,381
1,516
1,651
1,786
1,920
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
1,757
1,870
1,983
2,095
2,207
1,794
1,910
2,025
2,140
2,254
1,831
1,949
2,067
2,184
2,901
1,867
1,988
2,109
2,228
2,347
1,905
2,028
2,151
2,273
2,394
1,942
2,067
2,193
2,317
2,441
1,979
2,107
2,234
2,361
2,488
2,016
2,146
2,276
2,406
2,535
2,053
2,186
2,318
2,450
2,582
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
2,318
2,539
2,867
3,190
2,367
2,593
2,928
3,259
2,417
2,648
2,990
3,328
2,466
2,702
3,052
3,397
2,515
2,756
3,113
3,466
2,565
2,810
3,175
3,535
2,614
2,865
3,237
3,605
2,663
2,919
3,298
3,674
2,713
2,973
3,360
3,743
2
2,2
2,50
2,8
3
3,25
3,50
3,75
3,403
3,667
3,927
4,184
3,477
3,747
4,013
4,277
3,551
3,827
4,100
4,369
3,625
3,907
4,186
4,462
3,699
3,987
4,272
4,554
3,773
4,067
4,359
4,647
3,847
4,148
4,445
4,739
3,921
4,228
4,531
4,832
3,995
4,308
4,618
4,924
3
3,25
3,50
3,75
4
4,25
4,50
4,75
4,439
4,690
4,938
5,183
4,537
4,795
5,049
5,300
4,636
4,900
5,160
5,417
4,735
5,004
5,271
5,535
4,833
5,109
5,382
5,652
4,932
5,214
5,493
5,769
5,031
5,319
5,604
5,886
5,129
5,424
5,715
6,003
5,228
5,528
5,826
6,120
4
4,25
4,50
4,75
5
5,25
5,50
5,75
5,425
5,664
5,900
6,133
5,549
5,794
6,036
6,274
5,672
5,923
6,171
6,416
5,795
6,052
6,307
6,558
5,918
6,182
6,442
6,700
6,042
6,311
6,578
6,842
6,165
6,441
6,714
6,983
6,288
6,570
6,849
7,125
6,412
6,700
6,985
7,267
5
5,25
5,50
5,75
6
6,25
6,50
6,75
6,362
6,589
6,812
7,033
6,510
6,743
6,973
7,199
6,658
6,897
7,133
7,366
6,806
7,051
7,293
7,532
6,954
7,205
7,453
7,699
7,102
7,359
7,614
7,865
7,250
7,514
7,774
8,031
7,398
7,668
7,934
8,198
7,546
7,822
8,095
8,364
6
6,25
6,50
6,75
7
7,25
7,50
7,75
7,250
7,464
7,675
7,883
7,423
7,643
7,860
8,075
7,595
7,822
8,045
8,266
7,768
8,001
8,230
8,547
7,941
8,179
8,415
8,648
8,113
8,358
8,600
8,839
8,286
8,537
8,785
9,030
8,458
8,716
8,970
9,221
8,631
8,895
9,155
9,412
7
7,25
7,50
7,75
8
8,50
9
9,50
8,088
8,490
8,878
9,254
8,286
8,699
9,100
9,489
8,483
8,909
9,322
9,723
8,680
9,119
9,544
9,957
8,878
9,328
9,766
10,19
9,075
9,538
9,988
10,43
9,272
9,747
10,21
10,66
9,469
9,957
10,43
10,89
9,667
10,17
10,65
11,13
8
8,50
9
9,50
9,618
10,31
10,95
9,865
10,58
11,25
11,86
10,11
10,85
11,54
12,18
10,36
11,12
11,84
12,50
10,60
11,39
12,13
12,82
10,85
11,67
12,43
13,15
11,10
11,94
12,73
13,47
11,34
12,21
13,02
13,79
11,59
12,48
13,32
14,11
10
11
12
13
13,12
13,69
14,21
13,47
14,06
14,60
13,81
14,43
14,99
14,16
14,80
15,39
14,50
15,17
15,78
14,85
15,54
16,18
14
15
16
10
11
12
13
14
15
16
56
50
0,5
0,6
0,7
0,8
0,9
30.11.2007
10:04 Uhr
Seite 57
Wall
mm
58
59
60
61
62
63
64
65
66
1
1,1
1,2
1,3
1,4
1,406
1,543
1,681
1,818
1,954
1,430
1,570
1,710
1,850
1,989
1,455
1,598
1,740
1,882
2,023
1,480
1,625
1,770
1,914
2,058
1,504
1,652
1,799
1,946
2,092
1,529
1,679
1,829
1,978
2,127
1,554
1,706
1,858
2,010
2,161
1,578
1,733
1,888
2,042
2,196
1,603
1,760
1,918
2,074
2,230
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,090
2,225
2,360
2,495
2,629
2,127
2,265
2,402
2,539
2,675
2,164
2,304
2,444
2,583
2,722
2,201
2,344
2,486
2,628
2,769
2,238
2,383
2,528
2,672
2,816
2,275
2,423
2,570
2,717
2,863
2,312
2,462
2,612
2,761
2,910
2,349
2,502
2,654
2,805
2,956
2,386
2,541
2,696
2,850
3,003
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
2,762
3,027
3,422
3,812
2,811
3,082
3,483
3,881
2,861
3,136
3,545
3,950
2,910
3,190
3,607
4,019
2,959
3,244
3,668
4,088
3,009
3,299
3,730
4,157
3,058
3,353
3,791
4,226
3,107
3,407
3,853
4,295
3,156
3,461
3,915
4,364
2
2,2
2,50
2,8
3
3,25
3,50
3,75
4,069
4,388
4,704
5,017
4,143
4,468
4,790
5,109
4,217
4,548
4,877
5,202
4,291
4,628
4,963
5,294
4,365
4,709
5,049
5,387
4,439
4,789
5,135
5,479
4,513
4,869
5,222
5,572
4,587
4,949
5,308
5,664
4,661
5,029
5,394
5,757
3
3,25
3,50
3,75
4
4,25
4,50
4,75
5,327
5,633
5,937
6,237
5,425
5,738
6,048
6,355
5,524
5,843
6,159
6,472
5,622
5,948
6,270
6,589
5,721
6,052
6,381
6,706
5,820
6,157
6,492
6,823
5,918
6,262
6,603
6,940
6,017
6,367
6,714
7,057
6,116
6,472
6,825
7,175
4
4,25
4,50
4,75
5
5,25
5,50
5,75
6,535
6,829
7,121
7,409
6,658
6,959
7,256
7,551
6,782
7,088
7,392
7,692
6,905
7,218
7,527
7,834
7,028
7,347
7,663
7,976
7,151
7,477
7,799
8,118
7,275
7,606
7,934
8,260
7,398
7,736
8,070
8,401
7,521
7,865
8,206
8,543
5
5,25
5,50
5,75
6
6,25
6,50
6,75
7,694
7,976
8,255
8,531
7,842
8,130
8,415
8,697
7,990
8,284
8,576
8,864
8,138
8,438
8,736
9,030
8,286
8,592
8,896
9,197
8,434
8,747
9,056
9,363
8,582
8,901
9,217
9,530
8,730
9,055
9,377
9,696
8,878
9,209
9,537
9,862
6
6,25
6,50
6,75
7
7,25
7,50
7,75
8,804
9,073
9,340
9,604
8,976
9,252
9,525
9,795
9,149
9,431
9,710
9,986
9,321
9,610
9,895
10,18
9,494
9,788
10,08
10,37
9,667
9,967
10,26
10,56
9,839
10,15
10,45
10,75
10,01
10,32
10,63
10,94
10,18
10,50
10,82
11,13
7
7,25
7,50
7,75
8
8,50
9
9,50
9,864
10,38
10,88
11,36
10,06
10,59
11,10
11,60
10,26
10,80
11,32
11,83
10,46
11,01
11,54
12,07
10,65
11,22
11,76
12,30
10,85
11,42
11,99
12,53
11,05
11,63
12,21
12,77
11,24
11,84
12,43
13,00
11,44
12,05
12,65
13,24
8
8,50
9
9,50
10
11
12
13
11,84
12,75
13,61
14,43
12,08
13,02
13,91
14,75
12,33
13,29
14,21
15,07
12,58
13,56
14,50
15,39
12,82
13,84
14,80
15,71
13,07
14,11
15,09
16,03
13,32
14,38
15,39
16,35
13,56
14,65
15,69
16,67
13,81
14,92
15,98
16,99
10
11
12
13
14
15
16
15,19
15,91
16,57
15,54
16,28
16,97
15,88
16,65
17,36
16,23
17,02
17,76
16,57
17,39
18,15
16,92
17,76
18,55
17,26
18,13
18,94
17,61
18,50
19,34
17,95
18,87
19,73
14
15
16
57
Outside diameter in mm
Wall
mm
30.11.2007
10:04 Uhr
Seite 58
Outside diameter in mm
Wall
mm
67
68
69
70
71
72
73
74
75
Wall
mm
1
1,1
1,2
1,3
1,4
1,628
1788
1,947
2,106
2,265
1,652
1,815
1,977
2,138
2,299
1,677
1,842
2,006
2,170
2,334
1,702
1,869
2,036
2,202
2,368
1,726
1,896
2,066
2,234
2,403
1,751
1,923
2,095
2,267
2,437
1,776
1,950
2,125
2,299
2,472
1,800
1,977
2,154
2,331
2,506
1,825
2,005
2,184
2,363
2,541
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,423
2,580
2,738
2,894
3,050
2,460
2,620
2,779
2,938
3,097
2,497
2,659
2,821
2,982
3,144
2,534
2,699
2,863
3,027
3,191
2,571
2,738
2,905
3,072
3,238
2,608
2,778
2,947
3,116
3,284
2,645
2,817
2,989
3,160
3,331
2,682
2,857
3,031
3,204
3,378
2,719
2,896
3,073
3,249
3,425
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
3,206
3,516
3,976
4,433
3,255
3,570
4,038
4,502
3,304
3,624
4,100
4,571
3,354
3,679
4,161
4,640
3,403
3,739
4,223
4,709
3,452
3,787
4,285
4,778
3,502
9,841
4,346
4,847
3,551
3,896
4,408
4,917
3,600
3,950
4,470
4,986
2
2,2
2,50
2,8
3
3,25
3,50
3,75
4,735
5,109
5,481
5,849
4,809
5,189
5,567
5,942
4,883
5,270
5,653
6,034
4,957
5,350
5,740
6,126
5,031
5,430
5,826
6,219
5,105
5,510
5,912
6,311
5,179
5,590
5,999
6,404
5,252
5,670
6,085
6,496
5,327
5,750
6,171
6,589
3
3,25
3,50
3,75
4
4,25
4,50
4,75
6,214
6,577
6,936
7,292
6,313
6,681
7,047
7,409
6,412
6,786
7,158
7,526
6,510
6,891
7,269
7,643
6,609
6,996
7,380
7,760
6,708
7,101
7,490
7,877
6,806
7,205
7,601
7,994
6,905
7,310
7,712
8,112
7,003
7,415
7,823
8,229
4
4,25
4,50
4,75
5
5,25
5,50
5,75
7,645
7,994
8,341
8,685
7,768
8,124
8,477
8,827
7,891
8,253
8,613
8,969
8,015
8,383
8,748
9,110
8,138
8,512
8,884
9,252
8,261
8,642
9,019
9,394
8,384
8,771
9,155
9,536
8,508
8,901
9,291
9,678
8,631
9,030
9,426
9,819
5
5,25
5,50
5,75
6
6,25
6,50
6,75
9,026
9,363
9,698
10,03
9,174
9,517
9,858
10,20
9,321
9,671
10,02
10,36
9,469
9,825
10,18
10,53
9,617
9,980
10,34
10,69
9,765
10,13
10,50
10,86
9,913
10,29
10,66
11,03
10,06
10,44
10,82
11,19
10,21
10,60
10,98
11,36
6
6,25
6,50
6,75
7
7,25
7,50
7,75
10,36
10,68
11,00
11,32
10,53
10,86
11,19
11,51
10,70
11,04
11,37
11,71
10,88
11,22
11,56
11,90
11,05
11,40
11,74
12,09
11,22
11,58
11,93
12,28
11,39
11,76
12,11
12,47
11,57
11,93
12,30
12,66
11,74
12,11
12,48
12,85
7
7,25
7,50
7,75
8
8,50
9
9,50
11,64
12,26
12,87
13,47
11,84
12,47
13,10
13,71
12,03
12,68
13,32
13,94
12,23
12,89
13,54
14,17
12,43
13,10
13,76
14,41
12,63
13,31
13,98
14,64
12,82
13,52
14,21
14,88
13,02
13,73
14,43
15,11
13,22
13,94
14,65
15,35
8
8,50
9
9,50
10
11
12
13
14,06
15,19
16,28
17,31
14,30
15,46
16,57
17,63
14,55
15,73
16,87
17,95
14,80
16,01
17,16
18,27
15,04
16,28
17,46
18,60
15,29
16,55
17,76
18,92
15,54
16,82
18,05
19,24
15,78
17,09
18,35
19,56
16,03
17,36
18,64
19,8g
10
11
12
13
14
15
16
17
18,30
19,24
20,12
20,96
18,64
19,61
20,52
21,38
18,99
19,98
20,91
21,80
19,34
20,35
21,31
22,22
19,68
20,72
21,70
22,64
20,03
21,09
22,10
23,06
20,37
21,46
22,49
23,48
20,72
21,83
22,89
23,90
21,06
22,20
23,28
24,32
14
15
16
17
18
21,75
22,20
22,64
23,08
23,53
23,97
24,42
24,86
25,30
18
58
30.11.2007
10:04 Uhr
Seite 59
76
77
78
79
80
81
82
83
84
Wall
mm
1
1,1
1,2
1,3
1,4
1,850
2,032
2,213
2,395
2,575
1,874
2,059
2,243
2,427
2,610
1,899
2,086
2,273
2,459
2,645
1,923
2,113
2,302
2,491
2,679
1,948
2,140
2,332
2,523
2,714
1,973
2,167
2,361
2,555
2,748
1,997
2,194
2,391
2,587
2,783
2,022
2,222
2,421
2,619
2,817
2,047
2,249
2,450
2,651
2,852
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,756
2,936
3,115
3,294
3,472
2,793
2,975
3,157
3,338
3,519
2,830
3,014
3,198
3,382
3,566
2,867
3,054
3,241
3,427
3,612
2,904
3,093
3,282
3,471
3,659
2,941
3,133
3,324
3,516
3,706
2,978
3,172
3,366
3,560
3,753
3,015
3,212
3,408
3,604
3,800
3,052
3,251
3,450
3,649
3,847
1,5
1,6
1,7
1,8
1,9
2
2,2
2,50
2,8
3,650
4,004
4,531
5,055
3,699
4,058
4,593
5,124
3,748
4,113
4,655
5,193
3,798
4,167
4,716
5,262
3,847
4,221
4,778
5,331
3,896
4,275
4,840
5,400
3,946
4,330
4,901
5,469
3,995
4,384
4,963
5,538
4,044
4,438
5,024
5,607
2
2,2
2,50
2,8
3
3,25
3,50
3,75
5,401
5,831
6,257
6,681
5,475
5,911
6,344
6,774
5,549
5,991
6,430
6,866
5,622
6,071
6,516
6,959
5,696
6,151
6,603
7,051
5,770
6,231
6,689
7,144
5,844
6,311
6,775
7,236
5,918
6,392
6,862
7,325
5,992
6,472
6,948
7,421
3
3,25
3,50
3,75
4
4,25
4,50
4,75
7,102
7,520
7,934
8,346
7,201
7,625
8,045
8,463
7,299
7,729
8,156
8,580
7,398
7,835
8,267
8,697
7,497
7,939
8,378
8,814
7,595
8,044
8,489
8,932
7,694
8,149
8,600
9,049
7,793
8,253
8,711
9,166
7,891
8,358
8,822
9,283
4
4,25
4,50
4,75
5
5,25
5,50
5,75
8,754
9,160
9,562
9,961
8,878
9,289
9,698
10,10
9,001
9,419
9,833
10,24
9,124
9,548
9,969
10,39
9,248
9,678
10,10
10,53
8,371
9,807
10,24
10,67
9,494
9,936
10,38
10,81
9,617
10,07
10,51
10,95
9,741
10,20
10,65
11,10
5
5,25
5,50
5,75
6
6,25
6,50
6,75
10,36
10,75
11,14
11,53
10,51
10,90
11,30
11,69
10,65
11,06
11,46
11,86
10,80
11,21
11,62
12,03
10,95
11,37
11,78
12,19
11,10
11,52
11,94
12,36
11,24
11,67
12,10
12,53
11,39
11,83
12,26
12,69
11,54
11,98
12,42
12,86
6
6,25
6,50
6,75
7
7,25
7,50
7,75
11,91
12,29
12,67
13,04
12,08
12,47
12,85
13,23
12,25
12,65
13,04
13,43
12,43
12,83
13,22
13,62
12,60
13,01
13,41
13,81
12,77
13,19
13,59
14,00
12,95
13,36
13,78
14,19
13,12
13,54
13,96
14,38
13,29
13,72
14,15
14,57
7
7,25
7,50
7,75
8
8,50
9
9,50
13,42
14,15
14,87
15,58
13,61
14,36
15,09
15,81
13,81
14,57
15,32
16,05
14,01
14,78
15,54
16,28
14,20
14,99
15,76
16,52
14,40
15,20
15,98
16,75
14,60
15,41
16,20
16,99
14,80
15,62
16,43
17,22
14,99
15,83
16,65
17,45
8
8,50
9
9,50
10
11
12
13
16,28
17,63
18,94
20,20
16,52
17,90
19,24
20,52
16,77
18,18
19,53
20,84
17,02
18,45
19,83
21,16
17,26
18,72
20,12
21,48
17,51
18,99
20,42
21,80
17,76
19,26
20,72
22,12
18,00
19,53
21,01
22,44
18,25
19,80
21,31
22,76
10
11
12
13
14
15
16
17
21,41
22,57
23,68
24,74
21,75
22,94
24,07
25,16
22,10
23,31
24,46
25,57
22,44
23,68
24,86
25,99
22,79
24,05
25,25
26,41
23,13
24,42
25,65
26,83
23,48
24,79
26,04
27,52
23,82
25,16
26,44
27,67
24,17
25,53
26,83
28,09
14
15
16
17
18
25,75
26,19
26,63
27,08
27,52
27,97
28,41
28,85
29,30
18
59
Outside diameter in mm
Wall
mm
30.11.2007
10:04 Uhr
Seite 60
Outside diameter in mm
Wall
mm
85
86
87
88
89
90
95
100
105
Wall
mm
1
1,1
1,2
1,3
1,4
2,071
2,276
2,480
2,683
2,886
2,096
2,303
2,509
2,715
2,921
2,121
2,330
2,539
2,747
2,955
2,145
2,357
2,569
2,779
2,989
2,170
2,984
2,598
2,811
3,024
2,195
2,412
2,628
2,844
3,059
1,5
1,6
1,7
1,8
1,9
3,089
3,291
3,492
3,693
3,894
3,126
3,330
3,534
3,737
3,940
3,163
3,370
3,576
3,782
3,987
3,200
3,409
3,618
3,826
4,034
3,237
3,448
3,660
3,871
4,081
3,274
3,488
3,702
3,915
4,128
3,459
3,686
3,912
4,137
4,362
2
2,2
2,50
2,8
4,094
4,492
5,086
5,676
4,143
4,547
5,148
5,745
4,192
4,601
5,209
5,814
4,242
4,655
5,271
5,883
4,291
4,709
5,333
5,952
4,340
4,764
5,394
6,021
4,587
5,035
5,703
6,367
4,833
5,306
6,011
6,712
5,080
5,701
6,319
7,057
2
2,2
2,50
2,8
3
3,25
3,50
3,75
6,066
6,552
7,034
7,514
6,140
6,632
7,121
7,606
6,214
6,712
7,207
7,699
6,288
6,792
7,293
7,791
6,362
6,872
7,380
7,883
6,436
6,953
7,466
7,976
6,806
7,353
7,897
8,438
7,176
7,754
8,329
8,901
7,546
8,155
8,760
9,363
3
3,25
3,50
3,75
4
4,25
4,50
4,75
7,990
8,463
8,933
9,400
8,088
8,568
9,044
9,517
8,187
8,673
9,155
9,634
8,286
8,777
9,266
9,751
8,384
8,882
9,377
9,869
8,483
8,987
9,488
9,986
8,976
9,511
10,04
10,57
9,469
10,04
10,60
11,16
9,963
10,56
11,15
11,74
4
4,25
4,50
4,75
5
5,25
5,50
5,75
9,864
10,32
10,78
11,24
9,987
10,45
10,92
11,38
10,11
10,58
11,05
11,52
10,23
10,71
11,19
11,66
10,36
10,84
11,33
11,80
10,48
10,97
11,46
11,95
11,10
11,61
12,14
12,66
11,71
12,27
12,82
13,36
12,33
12,91
13,50
14,07
5
5,25
5,50
5,75
6
6,25
6,50
6,75
11,69
12,14
12,58
13,03
11,84
12,29
12,74
13,19
11,98
12,45
12,90
13,36
12,13
12,60
13,06
13,52
12,28
12,75
13,22
13,69
12,43
12,91
13,38
13,86
13,17
13,68
14,19
14,69
13,91
14,45
14,99
15,52
14,65
15,22
15,79
16,35
6
6,25
6,50
6,75
7
7,25
7,50
7,75
13,46
13,90
14,33
14,76
13,64
14,08
14,52
14,95
13,81
14,26
14,70
15,15
13,98
14,44
14,89
15,34
14,15
14,62
15,07
15,53
14,33
14,79
15,26
15,72
15,19
15,69
16,18
16,67
16,05
16,58
17,11
17,63
16,92
17,48
18,03
18,59
7
7,25
7,50
7,75
8
8,50
9
9,50
15,19
16,04
16,87
17,69
15,39
16,25
17,09
17,92
15,59
16,46
17,31
18,16
15,78
16,67
17,53
18,39
15,98
16,88
17,76
18,63
16,18
17,08
17,98
18,86
17,16
18,13
19,09
20,03
18,15
19,18
20,20
21,20
19,14
20,23
21,31
22,37
8
8,50
9
9,50
10
11
12
13
18,50
20,08
21,60
23,08
18,74
20,35
21,90
23,40
18,99
20,62
22,2
23,72
19,24
20,89
22,49
24,05
19,48
21,16
22,79
24,37
19,73
21,43
23,08
24,69
20,96
22,79
24,56
26,29
22,20
24,14
26,04
27,89
23,43
25,50
27,52
29,50
10
11
12
13
14
15
16
17
24,51
25,90
27,23
28,51
24,86
26,27
27,62
28,93
25,20
26,63
28,02
29,35
25,55
27,00
28,41
29,77
25,90
27,37
28,81
30,19
26,24
27,74
29,20
30,61
27,97
29,59
31,17
32,70
29,69
31,44
33,15
34,80
31,42
33,29
35,12
36,89
14
15
16
17
18
19
20
29,74
30,93
32,06
30,19
31,39
32,55
30,63
31,86
33,05
31,07
32,33
33,54
31,52
32,80
34,03
31,96
33,27
34,53
34,18
35,61
36,99
36,40
37,95
39,46
38,62
40,30
41,93
18
19
20
60
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
30.11.2007
10:04 Uhr
Seite 61
110
115
120
125
6,067
130
135
140
145
150
Wall
mm
2
2,2
2,50
2,8
5,327
5,977
6,627
7,402
5,573
6,254
6,936
7,747
5,820
6,532
7,244
8,093
7,553
8,438
3
3,25
3,50
3,75
7,916
8,555
9,192
9,825
8,286
8,956
9,624
10,29
8,656
9,357
10,06
10,75
9,026
9,758
10,49
11,21
9,395
10,16
10,92
11,67
9,765
10,56
11,35
12,14
10,14
10,96
11,78
12,60
10,51
11,36
12,21
13,06
10,88
11,76
12,64
13,52
3
3,25
3,50
3,75
4
4,25
4,50
4,75
10,46
11,08
11,71
12,33
10,95
11,61
12,26
12,91
11,44
12,13
12,82
13,50
11,94
12,66
13,37
14,09
12,43
13,18
13,93
14,67
12,92
13,70
14,48
15,26
13,42
14,23
15,04
15,84
13,91
14,75
15,59
16,43
14,40
15,28
16,15
17,01
4
4,25
4,50
4,75
5
5,25
5,50
5,75
12,95
13,56
14,17
14,78
13,56
14,21
14,85
15,49
14,17
14,86
15,53
16,20
14,80
15,50
16,21
16,91
15,41
16,15
16,89
17,62
16,03
16,80
17,56
18,33
16,65
17,45
18,24
19,04
17,26
18,09
18,92
19,74
17,88
18,74
19,60
20,45
5
5,25
5,50
5,75
6
6,25
6,50
6,75
15,39
15,99
16,59
17,19
16,13
16,76
17,39
18,02
16,87
17,53
18,19
18,85
17,61
18,30
18,99
19,68
18,35
19,07
19,80
20,52
19,09
19,84
20,60
21,35
19,83
20,61
21,40
22,18
20,57
21,38
22,20
23,01
21,31
22,16
23,00
23,84
6
6,25
6,50
6,75
7
7,25
7,50
7,75
17,78
18,37
18,96
19,54
18,64
19,26
19,88
20,50
19,51
20,16
20,81
21,45
20,37
21,05
21,73
22,41
21,23
21,95
22,66
23,36
22,10
22,84
23,58
24,32
22,96
23,73
24,51
25,27
23,82
24,63
25,43
26,23
24,68
25,52
26,36
27,19
7
7,25
7,50
7,75
8
8,50
9
9,50
20,12
21,28
22,42
23,55
21,11
22,33
23,53
24,72
22,10
23,37
24,64
25,89
23,08
24,42
25,75
27,06
24,07
25,47
26,86
28,23
25,05
26,52
27,97
29,40
26,04
27,57
29,08
30,57
27,03
28,61
30,19
31,75
28,01
29,66
31,30
32,92
8
8,50
9
9,50
10
11
12
13
24,66
26,86
29,00
31,10
25,90
28,21
30,48
32,70
27,13
29,57
31,96
34,30
28,36
30,93
33,44
35,91
29,59
32,28
34,92
37,51
30,83
33,64
36,40
39,11
32,06
35,00
37,88
40,72
33,29
36,35
39,36
42,32
34,53
37,71
40,84
43,92
10
11
12
13
14
15
16
17
33,15
35,14
37,09
38,99
34,87
36,99
39,06
41,09
36,60
38,84
41,04
43,18
38,32
40,69
43,01
45,28
40,05
42,54
44,98
47,38
41,78
44,39
46,96
49,47
43,50
46,24
48,93
51,57
45,23
48,09
50,90
53,66
46,96
49,94
52,87
55,76
14
15
16
17
18
19
20
40,84
42,64
44,39
43,06
44,98
46,86
45,28
47,33
49,32
47,50
49,67
51,79
49,72
52,01
54,26
51,94
54,35
56,72
54,16
56,70
59,19
56,38
59,04
61,65
58,60
61,38
64,12
18
19
20
2
2,2
2,50
2,8
61
Outside diameter in mm
Wall
mm
30.11.2007
10:04 Uhr
Seite 62
Outside diameter in mm
Wall
mm
155
160
165
170
175
180
185
190
195
Wall
200
mm
3
3,25
3,50
3,75
11,25
12,16
13,08
13,99
11,62
12,56
13,51
14,45
11,99
12,96
13,94
14,91
12,36
18,37
14,37
15,37
12,73
13,77
14,80
15,84
13,10
14,17
15,24
16,30
13,47
14,57
15,67
16,76
13,84
14,97
16,10
17,22
14,21
15,37
16,53
17,69
14,58
15,77
16,96
18,15
3
3,25
3,50
3,75
4
4,25
4,50
4,75
14,89
15,80
16,70
17,60
15,69
16,32
17,26
18,19
15,88
16,85
17,81
18,77
16,37
17,37
18,37
19,36
16,87
17,90
18,92
19,94
17,36
18,42
19,48
20,53
17,86
18,95
20,03
21,12
18,35
19,47
20,59
21,70
18,84
19,99
21,14
22,29
19,34
20,52
21,70
22,87
4
4,25
4,50
4,75
5
5,25
5,50
5,75
18,50
19,39
20,28
21,16
19,11
20,03
20,95
21,87
19,73
20,68
21,68
22,58
20,34
21,33
22,31
23,29
20,96
21,98
22,99
24,00
21,58
22,62
23,67
24,71
22,19
23,27
24,35
25,42
22,81
23,92
25,02
26,13
23,43
24,57
25,70
26,83
24,04
25,21
26,38
27,54
5
5,25
5,50
5,75
6
6,25
6,50
6,75
22,05
22,99
23,80
24,68
22,79
23,70
24,60
25,51
23,53
24,47
25,41
26,34
24,27
25,24
26,21
27,17
25,01
26,01
27,01
28,01
25,75
26,78
27,81
28,84
26,48
27,55
28,61
29,67
27,22
28,32
29,41
30,50
27,96
29,09
30,21
31,34
28,70
29,86
31,02
32,17
6
6,25
6,50
6,75
7
7,25
7,50
7,75
25,55
26,42
27,28
28,14
26,41
27,31
28,20
29,10
27,27
28,20
29,13
30,05
28,14
29,10
30,05
31,01
29,00
29,99
30,98
31,96
29,86
60,89
31,90
32,92
30,73
31,78
32,83
33,88
31,59
32,67
33,75
34,83
32,45
33,57
34,68
35,79
33,32
34,46
35,60
36,74
7
7,25
7,50
7,75
8
8,50
9
9,50
29,00
30,71
32,41
34,09
29,99
31,76
33,52
35,26
30,97
32,81
34,62
36,43
31,96
33,85
35,73
37,60
32,95
34,90
36,84
38,77
33,93
35,90
37,95
39,95
34,92
37,00
39,05
41,12
35,90
38,05
40,17
42,29
36,89
39,10
41,28
43,46
37,99
40,14
42,39
44,63
8
8,50
9
9,50
10
11
12
13
35,76
39,06
42,32
45,53
36,99
40,42
43,80
47,13
38,23
41,78
45,28
48,73
39,46
43,13
46,76
50,33
40,69
44,49
48,24
51,94
41,92
45,85
49,72
53,54
43,16
47,20
51,20
55,14
44,39
48,56
52,68
56,75
45,62
49,92
54,16
58,35
46,86
51,27
55,64
59,95
10
11
12
13
14
15
16
17
48,68
51,79
54,85
57,86
50,41
53,64
56,82
59,95
52,13
55,49
58,79
62,05
53,86
57,4
60,77
64,14
55,59
59,19
62,74
66,24
57,31
61,04
64,71
68,34
59,04
62,89
66,68
70,43
60,77
64,74
68,66
72,53
62,49
66,59
70,63
74,63
64,22
68,44
72,60
76,72
14
15
16
17
18
19
20
60,82
63,73
66,59
63,04
66,07
69,05
65,26
68,41
71,52
67,47
70,75
73,98
69,69
73,10
76,45
71,91
75,44
78,92
74,13
77,78
81,38
76,35
80,13
83,85
78,57
82,47
86,92
80,79
84,81
88,79
18
19
20
62
30.11.2007
10:04 Uhr
Seite 63
Hydraulic Tubes
4
6
7
8
W.T.
x
x
x
x
10 x
12 x
14 x
15 x
16 x
18 x
20 x
0,5
1
1,5
2
2,25
1,5
1
1,5
1
1,5
2
2,5
1
1,5
2
1
1,5
2
2,5
1
1,5
2
2,5
3
1
1,5
2
2,5
3
1
1,5
2
2,5
3
1,5
2
2,5
I.D.
Grade
kg/m
O.D
3
4
3
2
1,5
4
6
5
8
7
6
5
10
9
8
12
11
10
9
13
12
11
10
9
14
13
12
11
10
16
15
14
13
12
17
16
15
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
0,043
0,123
0,166
0,197
0,208
0,203
0,173
0,240
0,222
0,314
0,395
0,462
0,271
0,388
0,493
0,321
0,462
0,592
0,709
0,345
0,499
0,641
0,771
0,888
0,370
0,536
0,691
0,832
0,962
0,419
0,610
0,789
0,956
20
22
24
25
28
30
32
35
38
42
50
0,684
0,888
W.T.
3
4
1
1,5
2
2,5
3
3,5
1
2
1,5
2
2,5
3
4
1,5
2
2,5
3
1,5
2
2,5
3
4
2,5
3
2
2,5
3
2,5
3
4
5
2
3
5
6
I.D.
Grade
kg/m
14
12
20
19
18
17
16
15
22
20
22
21
20
19
17
25
24
23
22
27
26
25
24
22
27
26
31
30
29
33
32
30
28
38
36
32
38
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37.4
St37,4
St37,4
St37,4
St37,4
St37,4
1,258
1,578
0,518
0,758
0,986
0,758
0,986
1,597
0,567
1,085
0,869
1,134
1,387
1,628
2,072
0,980
1,282
1,572
1,854
1,054
1,381
1,695
1,998
2,565
1,819
2,146
1,628
2,004
2,367
2,189
2,589
3,354
4,069
1,973
2,885
4,562
6,511
O.D
63
30.11.2007
10:04 Uhr
Seite 64
O.D.
mm
Wall Thickness
Unit: kg/m
1,2
1,6
2,0
2,3
2,6
2,9
15,9
0,435
0,564
0,686
0,771
0,853
0,930
19,0
0,527
0,687
0,838
0,947
1,050
1,150
21,7
0,607
0,793
0,972
1,100
1,220
1,340
1,460
25,4
0,716
0,939
1,150
1,310
1,460
1,610
1,750
27,2
0,769
1,010
1,240
1,410
1,580
1,740
1,890
2,050
2,290
31,8
0,905
1,190
1,470
1,670
1,870
2,070
2,260
2,440
2,740
3,030
34,0
1,280
1,580
1,800
2,010
2,220
2,430
2,630
2,960
3,270
38,1
1,440
1,780
2,030
2,280
2,520
2,750
2,990
3,360
3,730
4,080
4,420
42,7
2,010
2,290
2,570
2,850
3,120
3,380
3,820
4,240
4,650
5,050
5,430
45,0
2,120
2,420
2,720
3,010
3,300
3,580
4,040
4,490
4,930
5,360
5,770
48,6
2,300
2,630
2,950
3,270
3,580
3,890
4,400
4,890
5,380
5,850
6,300
6,750
7,180
50,8
2,410
2,750
3,090
3,430
3,760
4,080
4,620
5,140
5,650
6,140
6,630
7,100
7,560
8,440
54,0
2,560
2,930
3,300
3,650
4,010
4,360
4,930
5,490
6,040
6,580
7,100
7,630
8,110
mm
3,2
3,5
4,0
4,5
5,0
5,5
6,0
6,5
7,0
8,0
9,5
11,0 12,5
1,890
3,580
6,170
57,1
2,720
3,110
3,490
3,880
4,250
4,630
5,240
5,840
6,420
7,000
7,560
8,110
8,650
60,3
2,880
3,290
3,700
4,100
4,510
4,900
5,550
6,190
6,820
7,430
8,030
8,620
63,5
3,470
3,900
4,330
4,760
5,180
5,870
6,550
7,210
7,870
8,510
9,140
65,0
3,560
4,000
4,440
4,880
5,310
6,020
6,710
7,400
8,070
8,700
70,0
3,840
4,320
4,800
5,270
5,740
6,510
7,270
8,010
8,750
76,2
4,190
4,720
5,240
5,760
6,270
7,120
7,960
8,780
82,6
6,270
6,830
7,750
8,670
88,9
6,760
7,370
8,370
9,370 10,300 11,300 12,300 13,200 14,100 16,000 18,600 21,100 23,600
101,6
8,470
9,630 10,800 11,900 13,000 14,100 15,200 16,300 18,500 21,600 24,600 27,500
114,3
10,900 12,200 13,500 14,800 16,000 17,300 18,500 21,000 24,600 28,000 31,400
127,0
12,100 13,600 15,000 16,500 17,900 19,300 20,700 23,500 27,500 31,500 35,300
139,8
64
10
12
200
250
300
3 1/2
90
150
80
2 1/2
65
50
125
1 1/2
40
100
1 1/4
32
318,5
267,4
216,3
165,2
139,8
114,3
101,6
89,1
76,3
60,5
48,6
42,7
34,0
27,2
21,7
17,3
13,8
10,5
mm
4,0
3,4
2,8
2,8
2,8
2,1
2,1
2,1
2,1
1,65
1,65
1,65
1,65
1,65
1,65
1,2
1,2
1,0
Wall thickness
mm
31,0
22,1
14,7
11,2
9,46
5,81
5,15
4,51
3,84
2,39
1,91
1,67
1,32
1,04
0,816
0,476
0,373
0,234
kg/m
Weight
Schedult 5S
4,5
4,0
4,0
3,4
3,4
3,0
3,0
3,0
3,0
2,8
2,8
2,8
2,8
2,1
2,1
1,65
1,65
1,2
Wall thickness
mm
34,80
26,00
20,90
13,60
11,40
8,23
7,29
6,37
5,42
3,98
3,16
2,76
2,15
1,30
1,02
0,637
0,494
0,275
kg/m
Weight
Schedule 10S
6,5
6,5
6,5
5,0
5,0
4,0
4,0
4,0
3,5
3,5
3,0
3,0
3,0
2,5
2,5
2,0
2,0
1,5
Wall thickness
mm
50,0
41,8
33,6
19,8
16,6
10,9
9,63
8,39
6,28
4,92
3,37
2,94
2,29
1,52
1,18
0,755
0,582
0,333
kg/m
Weight
Schedule 20S
10,3
9,3
8,2
7,1
6,6
6,0
5,7
5,5
5,2
3,9
3,7
3,6
3,4
2,9
2,8
2,3
2,2
1,7
Wall thickness
mm
78,3
59,2
42,1
27,7
21,7
16,0
13,5
11,3
9,12
5,44
4,10
3,47
2,57
1,74
1,31
0,851
0,629
0,369
kg/m
Weight
Schedule 40
17,4
15,1
12,7
11,0
9,5
8,6
8,1
7,6
7,0
5,5
5,1
4,9
4,5
3,9
3,7
3,2
3,0
2,4
Wall thickness
mm
129
93,9
63,8
41,8
30,5
22,4
18,7
15,3
12,0
7,46
5,47
4,57
3,27
2,24
1,64
1,11
0,799
0,479
kg/m
Weight
Schedule 80
25,4
21,4
18,2
14,3
12,7
11,1
Wall thickness
mm
184
130
88,9
53,2
39,8
28,2
kg/m
Weight
Schedule 120
33,3
28,6
23,0
18,2
15,9
13,5
12,7
11,1
9,5
8,7
7,1
6,4
6,4
5,5
4,7
Wall thickness
mm
234
168
110
66,0
48,6
33,6
27,8
21,4
15,6
11,1
7,29
5,73
4,36
2,94
1,97
kg/m
Weight
Schedule 160
10:04 Uhr
25
1/2
3/8
10
3/4
1/4
20
1/8
15
(B)
(A)
Outside
diameter
30.11.2007
Designation
of diameter
65
30.11.2007
10:04 Uhr
Seite 66
Thickness
mm
7,0
7,8
8,4
9,5
9,5
11,1
12,7
Thickness
mm
11,1
12,7
14,3
18,2
21,4
25,4
27,8
30,9
34,9
38,1
66
Schedule 30
Approx. Weight
Ibs/ft
kg/m
24,3
33,5
43,2
54,5
62,5
82,0
104,2
36,1
49,9
64,2
81,1
63,0
122,0
155,0
Schedule 120
Approx. Weight
Ibs/ft
kg/m
19,0
26,8
35,8
59,8
87,4
123,7
151,3
192,3
244,1
296,6
28,2
39,8
53,2
88,9
130,0
184,0
225,0
286,0
363,0
441,0
Schedule 40
Wall Thickness
Approx. Thickness
in
mm
Ibs/ft
kg/m
0,067
0,087
0,091
0,110
0,114
0,134
0,142
0,146
0,153
0,205
0,216
0,224
0,236
0,260
0,279
0,323
0,366
0,405
0,437
0,500
0,563
0,594
1,7
2,2
2,3
2,8
2,9
3,4
3,6
3,7
3,9
5,2
5,5
5,7
6,0
6,6
7,1
8,2
9,3
10,3
11,1
12,7
14,3
15,1
0,248
0,423
0,572
0,881
1,17
1,73
2,33
2,76
3,66
6,13
7,60
9,08
10,8
14,6
18,6
28,3
39,8
52,7
63,4
82,7
104,9
123,7
0,369
0,629
0,851
1,31
1,74
2,57
3,47
4,10
5,44
9,12
11,3
13,5
16,0
21,7
27,7
42,1
59,2
78,3
94,3
123,0
156,0
184,0
Schedule 140
Wall Thickness
Approx. Thickness
in
mm
Ibs/ft
kg/m
0,811
1,000
1,126
1,252
1,437
1,563
0,748
20,6
25,4
28,6
31,8
36,5
39,7
44,4
66,8
102,2
137,2
170,8
223,9
275,0
341,6
99,4
152,0
204,0
254,0
333,0
409,0
508,0
Schedule 60
Wall Thickness
Approx. Thickness
in
mm
Ibs/ft
kg/m
0,087
0,094
0,110
0,126
0,134
0,153
0,177
0,177
0,193
0,236
0,260
0,276
0,279
0,319
0,366
0,406
0,500
0,563
0,594
0,657
0,748
0,811
2,2
2,4
2,8
3,2
3,4
3,9
4,5
4,5
4,9
6,0
6,6
7,0
7,1
8,1
9,3
10,3
12,7
14,3
15,1
16,7
19,0
20,6
0,303
0,454
0,673
0,982
1,35
1,94
2,85
3,29
4,52
6,99
9,01
11,0
12,6
17,7
24,1
35,2
53,7
71,9
85,4
107,6
137,9
166,8
0,450
0,675
1,00
1,42
2,00
2,89
4,24
4,89
6,72
10,4
13,4
16,3
18,8
26,3
35,8
52,3
79,8
107,0
127,0
160,0
205,0
248,0
Schedule 160
Wall Thickness
Approx. Thickness
in
mm
Ibs/ft
kg/m
0,185
0,216
0,252
0,252
0,279
0,342
0,374
0,437
0,500
0,531
0,626
0,716
0,905
1,126
1,311
1,405
1,594
1,779
1,968
4,7
5,5
6,4
6,4
7,1
8,7
9,5
11,1
12,7
13,5
15,9
18,2
23,0
28,6
33,3
35,7
40,5
45,2
50,0
1,32
1,98
2,93
3,85
4,89
7,46
10,4
14,4
18,7
22,6
32,7
44,4
74,0
113,0
157,4
189,6
245,5
308,7
380,0
1,97
2,94
4,36
5,73
7,27
11,1
15,6
21,4
27,8
33,6
48,6
66,0
110,0
168,0
234,0
282,0
365,0
459,0
565,0
30.11.2007
10:04 Uhr
Seite 67
1/8
1/4
3/8
1/2
3/4
1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
NOMINAL
PIPE
SIZE
in
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
Schedule 10
OUTSIDE
DIAMETER
in
mm
0,413
0,543
0,681
0,854
1,07
1,34
1,68
1,91
2,38
3,00
3,51
4,00
4,50
5,50
6,50
8,52
10,53
12,54
14,00
16,00
18,00
20,00
10,5
13,8
17,3
21,7
27,2
34,0
42,7
48,6
60,5
76,3
89,1
101,6
114,3
139,8
165,2
216,3
267,4
318,5
355,6
406,4
457,2
508,0
Wall Thickness
in
mm
0,252
0,252
0,252
0,252
6,4
6,4
6,4
6,4
Schedule 20
Approx. Weight
lbs/ft
kg/m
37,0
42,4
48,2
53,3
55,1
63,1
71,7
79,2
Wall Thickness
in
mm
0,126
0,177
0,177
0,177
0,193
0,201
0,217
0,252
0,252
0,252
0,311
0,311
0,311
0,374
Schedule 80
OUTSIDE
DIAMETER
in
mm
0,413
0,543
0,681
0,854
1,07
1,34
1,68
1,91
2,38
3,00
3,51
4,00
4,50
5,50
6,50
8,52
10,53
12,54
14,00
I6,00
18,00
20,00
10,5
13,8
17,3
21,7
27,2
34,0
42,7
48,6
60,5
76,3
89,1
101,6
114,3
139,8
165,2
216,3
267,4
318,5
355,6
406,4
457,2
508,0
Wall Thickness
in
mm
0,094
0,118
0,126
0,146
0,153
0,177
0,193
0,201
0,216
0,276
0,299
0,319
0,338
0,374
0,433
0,500
0,594
0,685
0,748
0,842
0,937
1,031
2,4
3,0
3,2
3,7
3,9
4,5
4,9
5,1
5,5
7,0
7,6
8,1
8,6
9,5
11,0
12,7
15,1
17,4
19,0
21,4
23,8
26,2
3,039
5,360
6,315
7,263
8,877
11,37
14,59
22,2
27,7
33,1
45,5
52,2
58,8
78,7
4,52
7,97
9,39
10,8
13,2
16,9
21,7
33,1
41,2
49,3
67,7
77,6
87,5
117
Wall
in
0,276
0,307
0,331
0,374
0,374
0,437
0,500
Schedule 20
Approx. Weight
lbs/ft
kg/m
0,322
0,537
0,746
1,10
1,51
2,20
3,07
3,68
5,02
8,07
10,3
12,6
15,1
20,5
28,1
42,9
63,1
86,7
106,2
136,5
170,8
209,1
3,2
4,5
4,5
4,5
4,9
5,1
5,5
6,4
6,4
6,4
7,9
7,9
7,9
9,5
Approx. Weight
lbs/ft
kg/m
0,479
0,799
1,11
1,64
2,24
3,27
4,57
5,47
7,46
12,0
15,3
18,7
22,4
30,5
41,8
63,8
93,9
129,0
158,0
203,0
254,0
311,0
Wall Thickness
in
mm
0,594
0,716
0,842
0,937
1,031
1,157
1,279
15,1
18,2
21,4
23,8
26,2
29,4
32,5
Approx. Weight
lbs/ft
kg/m
50,4
75,3
105,6
131,1
165,4
208,5
256,2
74,6
112
157
195
246
310
381
Wall
in
0,437
0,500
0,563
0,716
0,842
1,000
1,094
1,216
1,374
1,500
67
NOMINAL
PIPE
SIZE
in
30.11.2007
10:04 Uhr
Seite 68
Nominal
Pipe Size
Outside
diameter
in
mm
Approx.
Wall Thickness
mm
Approximate Weight
Plain End
lbs/ft
Number of Threads
Treads and Coupling
kg/m
kg/ft
lbs/ft
kg/m
kg/ft
per Inch
* 1/8
10,5
2,0
0,282
0,419
0,128
0,284
0,423
0,129
28,00
* 1/4
13,8
2,3
0,438
0,652
0,199
0,443
0,659
0,201
19,00
3/8
17,3
2,3
0,572
0,851
0,259
0,579
0,862
0,263
19,00
1/2
21,7
2,8
0,880
1,31
0,399
0,887
1,32
0,402
14,00
3/4
27,2
2,8
1,14
1,69
0,515
1,15
1,71
0,521
14,00
34,0
3,2
1,63
2,43
0,741
1,67
2,48
0,756
11,00
1 1/4
42,7
3,5
2,27
3,38
1,03
2,33
3,47
1,06
11,00
1 1/2
48,6
3,5
2,61
3,89
1,19
2,68
3,99
1,22
11,00
60,5
3,8
3,57
5,31
1,62
3,69
5,49
1,67
11,00
2 1/2
76,3
4,2
5,02
7,47
2,28
5,21
7,75
2,36
11,00
89,1
4,2
5,91
8,79
2,68
6,15
9,15
2,79
11,00
3 1/2
101,6
4,2
6,79
10,1
3,08
7,12
10,6
3,23
11,00
114,3
4,5
8,20
12,2
3,72
8,60
12,8
3,90
11,00
139,8
4,5
10,1
15,0
4,57
10,7
15,9
4,85
11,00
165,2
5,0
13,3
19,8
6,04
14,1
21,0
6,40
11,00
190,7
5,3
16,3
24,2
7,38
17,3
25,8
7,86
11,00
216,3
5,8
20,2
30,1
9,17
21,6
32,1
9,78
11,00
241,8
6,2
24,2
36,0
11,0
25,7
38,3
11,7
11,00
10
267,4
6,6
28,5
42,4
12,9
30,4
45,2
13,8
11,00
12
318,5
6,9
35,6
53,0
16,2
38,2
56,8
17,3
11,00
14
355,6
7,9
45,5
67,7
20,6
Note:
*Furnished on special order.
The permissible variation in weight is 10%.
Galvanized pipe weights are heavier approximately by 6% than black pipe.
The permissible variation in outside diameter is 0.5 mm for pipe furnished threaded or plain end
with outside diameter 48.6 mm and under, 0.5 mm for threaded pipe with 60.5 mm O.D., 0.7 for
76.3 mm, 0.8 mm for 89.1 mm and up to 165.2 mm, 0.9 mm for 190.7, 0.1 mm for 216.3
mm, 1.2 mm for 241.8, 1.3 mm for 267.4 mm, 1.5 mm for 318.5 mm. and 1 % for plain end
pipe with outside diameter 60.5 mm and up to 355.6 mm.
Taper of thread is 3/4 inches per foot, measured on diameter.
Furnished with threads and coupling and in random lengths from 12 feet to 22 feet, unless otherwise specified.
The weight per foot of pipe with threads and coupling is based on a length of 5 meters.
68
30.11.2007
10:04 Uhr
Seite 69
DIN
2559
Designation
Symbol
Sectional View
I-seam
Wall
Thickness
(s)
3 mm
Angle
0.118 in.
1
DIN
2559
V-seam
16 mm
40
to
60
0.630 in.
40
to
60
12 mm
0.630 in.
V-seam
16 mm
U-seam
12 mm
60
to
2 mm
to
0.079 in.
0 to
3 mm
0 to
0.118 in.
2 mm
0 to
3 mm
0 to
0.118 in.
Nominal Pipe
Wall Thickness
End
Preparation
Less than *
Cut square or
slightly cham
fer, at mfrs
option
0 to
2 mm
0 to
0.079 in.
6 mm
* to 7/8 incl.
0.236 in.
Plain bevel
as in sketch
a above
Combound
bevek as in
sketch b
above
0.472 in.
DIN
25559
V-seam
on
V-root
16 mm
35
0.630 in.
0 to
4 mm
0 to
0.157 in.
0.472 in.
U-seam
on
V-seam
DIN
2559
Buttwelding Ends
ANSI - B16.25
22
DIN
2559
0 to
3 mm
0 to
0.118 in.
Root
Face
(c)
0 to
3 mm
0 to
0.118 in.
21
DIN
2559
Measures
Distance
(b)
0.079 in.
* =
3/16
1/8
API
Std
5 L/
5 LX
19 mm
-
0.750 in.
30
+5 - 0
Form
0 to
4 mm
0 to
0.157 in.
1.6 mm
0.063 in.
for carbon
steel, ferritic
alloy steel or
wrought iron;
for austenitic
alloy steel
69
30.11.2007
10:06 Uhr
Seite 70
TECHNIFIN Tubes
Description of available types of TECHNIFIN Tubes
TECHNIFIN TYPE G
The fin strip is wound into a mechanically produced groove and tightened by
backfilling of the base material under pressure. Groove depth 0,4 mm.
Advantages: High fin stability, excellent heat transfer, high operating temperature.
TECHNIFIN TYPE HY
A smooth core tube is inserted into an aluminium tube and then fins are
extrudes out of the aluminium tube. Advantages: Bond ot outer and inner
tube removes the risk of loss of contact due to thermal stress, fins are
more rigid, also available as serrated type TECHNIFIN HYS see below.
TECHNIFIN TYPE I
The fin strip is wound onto the base tube. Typical fin material: steel.
TECHNIFIN TYPE N
The fins are rolled out of the wall of the plain tube. Tube
and fin are consisting of one piece. Advantages: Excellent heattransfer, good
bending properties, wide range of material can be used.
TECHNIFIN TYPE M
Manufacturing and adavantages as described for type N but with higher
fins.
70
30.11.2007
10:06 Uhr
Seite 71
TECHNIFIN Tubes
Description of available types of TECHNIFIN Tubes
The fin strip is wound spirally onto the tube and welded continuously to
the tube along the spiral root. Advantages: Strong connection between
fin and base tube, prevents loosening of fin because of heat stress,
oxidization, corrosion etc., use at very high temperatures possible.
TECHNIFIN TYPE S
Square fins are welded onto a round base tube.
TECHNISTUD
Steel studs are welded by a special process onto the base tube.
71
TECHNIFIN TYPE WO
30.11.2007
10:06 Uhr
Seite 72
TECHNIFIN Type G
L1 max. = 12 000 mm
L2 max. = L1 -2y
Fa
Fi
FZR
Y max. = 4 x t
MATERIAL COMBINATIONS
Core Tube
Carbon steels (ASTM A 179/ A 214, St 35.8,ect.), low-alloy
steels, stainless steels, copper-nickel alloys, aluminium bronze,
copper, nickel-alloys (Alloy 400, etc.), bimetal
Fins
Aluminium / Steel / Galvanized Steel
FIELDS OF APPLICATION
the petroleum, chemical and petrochemical process industries
natural gas treatment
the steel industry: blast furnace and converter systems
power generation: steam turbine exhaust condensing
- contact condensing with cooling of circulating condensate
- fossil and nuclear power plants
air conditioning (freon, ammonia, propane)
incineration of household refuse
compressor coolers, ect.
ADVANTAGES
1) Thermal
The fin/tube wall contact is constant because of the setting and
makes it possible to use a wall temperature of up to 400 C.
2) Mechanical
The fin is set throughout its length and consequently does not
unwind even when partially uprooted.
MANUFACTURING PROCESS
72
30.11.2007
10:06 Uhr
Seite 73
TECHNIFIN Type G
ORDER-No.
s
mm
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.2.51- 5
1.2.51- 6
1.2.51- 7
1.2.51- 8
1.2.51- 9
1.2.51-10
1.2.51-11
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.2,5.51- 5
1.2,5.51- 6
1.2,5.51- 7
1.2,5.51- 8
1.2,5.51- 9
1.2,5.51-10
1.2,5.51-11
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.3.51- 5
1.3.51- 6
1.3.51- 7
1.3.51- 8
1.3.51- 9
1.3.51-10
1.3.51-11
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.2.57- 5
1.2.57- 6
1.2.57- 7
1.2.57- 8
1.2.57- 9
1.2.57-10
1.2.57-11
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.2,5.57- 5
1.2,5.57- 6
1.2,5.57- 7
1.2,5.57- 8
1.2,5.57- 9
1.2,5.57- 10
1.2,5.57- 11
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
TECHNIFIN G
1.3.57- 5
1.3.57- 6
1.3.57- 7
1.3.57- 8
1.3.57- 9
1.3.57-10
1.3.57-11
2,11
(14 BWG)
Min. Wall
-2,5
2,77
(12 BWG)
Min. Wall
-3,0
2,11
(14 BWG)
Min. Wall
-2,5
2,77
(12 BWG)
Min. Wall
-3,0
di
mm
Fins/in.
t
Fa
m*2*/m
Fa/Fi
Weight
Kg/m
FZR
m*2*/m
21,4
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
10,09
11,87
13,65
15,43
17,21
18,99
20,77
1,51
1,58
1,65
1,72
1,79
1,85
1,94
0,0234
0,0230
0,0226
0,0222
0,0218
0,0214
0,0210
(20,4)
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
10,58
12,45
14,32
16,19
18,05
19,92
21,79
1,76
1,83
1,90
1,98
2,05
2,11
2,19
0,0234
0,0230
0,0226
0,0222
0,0218
0,0214
0,0210
(19,4)
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
11,13
13,09
15,06
17,02
18,98
20,95
22,91
2,01
2,08
2,15
2,22
2,29
2,36
2,44
0,0234
0,0230
0,0226
0,0222
0,0218
0,0214
0,0210
21,4
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
13,16
15,56
17,95
20,35
22,74
25,14
27,53
1,65
1,73
1,82
1,92
2,01
2,11
2,20
0,0291
0,0286
0,0281
0,0276
0,0271
0,0266
0,0261
(20,4)
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
13,81
16,32
18,83
21,35
23,86
26,37
28,88
1,89
1,99
2,08
2,18
2,27
2,37
2,46
0,0291
0,0286
0,0281
0,0276
0,0271
0,0266
0,0261
(19,4)
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
14,42
17,16
19,80
22,45
25,09
27,73
30,37
2,14
2,23
2,33
2,42
2,52
2,61
2,71
0,0291
0,0286
0,0281
0,0276
0,0271
0,0266
0,0261
Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m weight of table + 0,1827 x fins per inch.
73
30.11.2007
10:06 Uhr
Seite 74
L1 max. = 12 000 mm
Fa
L2 max. = L1 -2t
Fi
FZR
MATERIAL COMBINATIONS
Core Tube
Carbon steels (ASTM A 179/ A 214, St 35.8,ect.), low-alloy steels, stainless steels, copper-nickel alloys, aluminium bronze, copper, nickel-alloys
(Alloy 400, ext.), bimetal
Fins
Aluminium
FIELDS OF APPLICATION
the petroleum, chemical and petrochemical process industries
natural gas treatment
the steel industry: blast furnace and converter systems
power generation: steam turbine exhaust condensing
- contact condensing with cooling of circulating condensate
- fossil and nuclear power plants
air conditioning (freon, ammonia, propane)
incineration of household refuse
compressor coolers, ect.
MANUFACTURING PROCESS
The manufacturing strip is folded to from an L shape and then wound
around the base tube. The feet of the fins are joined together and cover
the whole of the finned surface. Both lends are clamped down to avoid
unrolling through damage.
ADVANTAGES
Economic
This method of manufacturing enables us to place the finning on a very
thin-walled tube with is particularly desirable when using noble alloys
(titanium, stainless, copper, nickel).
The tube can withstand a temperature of up to 130C without the risk of
atmospheric corrosion or thermal stress.
74
30.11.2007
10:06 Uhr
Seite 75
TECHNIFIN Type L
ORDER-No.
S
mm
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.2.51.-5
1.2.51-6
1.2.51-7
1.2.51-8
1.2.51-9
1.2.51-10
1.2.51-11
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.2,5.51-5
1.2,5.51-6
2,11
1.2,5.51-7
(14 BWG)
1.2,5.51-8
Min. Wall
1.2,5.51-9
-2,5
1.2,5.51-10
1.2,5.51-11
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.3.51-5
1.3.51-6
1.3.51-7
1.3.51-8
1.3.51-9
1.3.51-10
1.3.51-11
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.2.57-5
1.2.57-6
1.2.57-7
1.2.57-8
1.2.57-9
1.2.57-10
1.2.57-11
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.2,5.57-5
1.2,5.57-6
1.2,5.57-7
1.2,5.57-8
1.2,5.57-9
1.2,5.57-10
1.2,5.57-11
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
TECHNIFIN L
1.3.57-5
1.3.57-6
1.3.57-7
1.3.57-8
1.3.57-9
1.3.57-10
1.3.57-11
2,77
(12 BWG)
Min. Wall
-3,0
2,11
(14BWG)
Min.Wall
-2,5
2,77
(12BWG)
Min.Wal
-3,0
di
mm
Fins/in.
t
Fa
m2/m
Fa/Fi
Weight
Kg/m
FRZ
m2/m
21,4
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
10,09
11,87
13,65
15,43
17,21
18,99
20,77
1,51
1,58
1,65
1,72
1,79
1,85
1,94
0,0229
0,0224
0,0219
0,0214
0,0209
0,0204
0,0199
(20,4)
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
10,58
12,45
14,32
16,19
18,05
19,92
21,79
1,76
1,83
1,90
1,98
2,05
2,11
2,19
0,0229
0,0224
0,0219
0,0214
0,0209
0,0204
0,0199
(19,4)
5
6
7
8
9
10
11
0,678
0,798
0,918
1,037
1,157
1,277
1,396
11,13
13,09
15,06
17,02
18,98
20,95
22,91
2,01
2,08
2,15
2,22
2,29
2,36
2,44
0,0229
0,0224
0,0219
0,0214
0,0209
0,0204
0,0199
21,4
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
13,16
15,56
17,95
20,35
22,74
25,14
27,53
1,65
1,73
1,82
1,92
2,01
2,11
2,20
0,0286
0,0280
0,0274
0,0268
0,0262
0,0256
0,0250
(20,4)
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
13,81
16,32
18,83
21,35
23,86
26,37
28,88
1,89
1,99
2,08
2,18
2,27
2,37
2,46
0,0286
0,0280
0,0274
0,0268
0,0262
0,0256
0,0250
(19,4)
5
6
7
8
9
10
11
0,885
1,046
1,207
1,368
1,529
1,690
1,851
14,42
17,16
19,80
22,45
25,09
27,73
30,37
2,14
2,23
2,33
2,42
2,52
2,61
2,71
0,0286
0,0280
0,0274
0,0268
0,0262
0,0256
0,0250
Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m weight of table + 0,1827 x fins per inch.
75
30.11.2007
10:06 Uhr
Seite 76
L1max. = 12 000 mm
L2max. = acc. to clients specification
Fa
Fi
FZR
MATERIAL COMBINATIONS
MANUFACTURING PROCESS
Core Tube
Carbon steels (ASTM A179 / A 214, St 35.8, ect.), lowalloy steels, stainless steels, copper-nickel alloys, aluminium bronze, copper, nickel-alloys, as well as exotic
grades.
Core tubes with extremely thin wall of above stated
materials can be applied.
In certain cases (high air speed) the fins are serrated after
fin process so as to increase the air coefficient.
FIELDS OF APPLICATION
ADVANTAGES
1) Thermal
The bonding of the outer and inner tubes removes the risk
of loss of contact with the aluminium due to thermal
stress.
Maximum operating temperature: 250C.
The transfer coeffcient remains steady.
Additionally as the outer sleeve is continuous no electrolytic couple is created.
2) Mechanical
The fins are more rigid and stand the handling shocks
better, compared to types G an L.
TECHNIFIN Type HY
Temperature max.: 300C
TECHNIFIN Type HYS
Temperature max.: 300C
76
30.11.2007
10:06 Uhr
Seite 77
ORDER-No.
S
mm
di
mm
Fins/in.
t
Fa
m2/m
Fa/Fi
Weight
Kg/m
FZR
m2/m
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1.51-8
1.1.51-9
1.1.51-10
1,0
23,4
8
9
10
0,991
1,105
1,218
13,48
15,02
16,56
1,49
1,49
1,49
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1,2.51-8
1.1,2.51-9
1.1,2.51-10
1,2
23,0
8
9
10
0,991
1,105
1,218
13,72
15,28
16,85
1,68
1,68
1,68
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1,5.51-8
1.1,5.51-9
1.1,5.51-10
1,5
22,4
8
9
10
0,991
1,105
1,218
14,09
15,69
17,30
1,85
1,85
1,85
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.2.51-8
1.2.51-9
1.2.51-10
2,0
21,4
8
9
10
0,991
1,105
1,218
14,74
16,43
18,11
2,12
2,12
2,12
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.2,5.51-8
1.2,5.51-9
1.2,5.51-10
2,5
20,4
8
9
10
0,991
1,105
1,218
15,47
17,23
19,00
2,38
2,38
2,38
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.3.51-8
1.3.51-9
1.3.51-10
3,0
19,4
8
9
10
0,991
1,105
1,218
16,26
18,12
19,98
2,62
2,62
2,62
0,0204
0,0200
0,0197
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1.57-8
1.1.57-9
1.1.57-10
1,0
23,4
8
9
10
1,330
1,486
1,642
18,10
20,23
22,33
1,69
1,69
1,69
0,0259
0,0254
0,0249
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1,2.57-8
1.1,2.57-9
1.1,2.57-10
1,2
23,0
8
9
10
1,330
1,486
1,642
18,41
20,58
22,72
1,88
1,88
1,88
0,0259
0,0254
0,0249
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.1,5.57-8
1.1,5.57-9
1.1,5.57-10
1,5
22,4
8
9
10
1,330
1,486
1,642
18,91
21,11
23,33
2,05
2,05
2,05
0,0259
0,0254
0,0249
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.2.57-8
1.2.57-9
1.2.57-10
2,0
21,4
8
9
10
1,330
1,486
1,642
19,79
22,12
24,41
2,32
2,32
2,32
0,0259
0,0254
0,0249
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.2,5.57-8
1.2,5.57-9
1.2,5.57-10
2,5
20,4
8
9
10
1,330
1,486
1,642
20,76
23,20
25,61
2,58
2,58
2,58
0,0259
0,0254
0,0249
TECHNIFIN HY
TECHNIFIN HY
TECHNIFIN HY
1.3.57-8
1.3.57-9
1.3.57-10
3,0
19,4
8
9
10
1,330
1,486
1,642
21,83
24,40
26,93
2,82
2,82
2,82
0,0259
0,0254
0,0249
Given weights are for steel tubes with Aluminium fins. Weight calculation for steel fins: Kg/m weight of table + 0,1827 x fins per inch.
77
30.11.2007
10:06 Uhr
Seite 78
TECHNIFIN Type I
Size Range
Base tube size:
Fins:
Fin thickness:
Manufacturing Process
6-219.1 (other sizes upon request)
50-500 fins/meter
0.4-1.5 mm
Fin height:
Fins/meter:
Plain ends:
+/- 1mm
+/- 2%/meter
+/- 5mm
Fields of application
Climatic Industry, Cooling
Heating, Drying
78
30.11.2007
10:06 Uhr
Seite 79
TECHNIFIN Type I
Standard Size Range
Wall
Strip
Size
Fins
Diam. Fins/m
10,2
1,6
10 x 0,4
30
15
1,5
10 x 0,4
35
17,2
1,8
10 x 0,4
37,2
17,2
18
1,8
18
20
20
21,3
14 x 0,4
10 x 0,4
14 x 0,4
10 x 0,4
14 x 0,4
10 x 0,4
45,2
38
46
48
48
41,3
21,3
14 x 0,4
49,3
21,3
20 x 0,5
61,3
25
14 x 0,4
53
26,9
2,3
14 x 0,4
54,9
26,9
2,3
20 x 0,5
66,9
30
2,6
20 x 0,5
70
33,7
2,6
20 x 0,5
73,7
33,7
2,6
26 x 1
85,7
Surface
Area
115
200
320
150
250
350
80
150
225
300
330
85
110
210
250
80
150
200
250
300
81
150
220
290
80
120
180
250
300
100
150
200
250
100
130
185
210
250
300
98
150
200
250
65
100
135
100
150
200
250
100
160
210
60
100
140
100
150
200
40
110
157
220
40
67
110
0,22
0,37
0,57
0,34
0,54
0,74
0,22
0,37
0,52
0,68
0,74
0,35
0,44
0,80
0,95
0,22
0,37
0,48
0,59
0,70
0,35
0,60
0,85
1,11
0,24
0,33
0,47
0,62
0,74
0,44
0,63
0,82
1,01
0,30
0,37
0,49
0,55
0,64
0,76
0,45
0,65
0,84
1,04
0,51
0,75
1,00
0,49
0,70
0,91
1,12
0,51
0,77
0,99
0,53
0,83
1,14
0,88
1,28
1,67
0,43
1,02
1,41
1,93
0,60
0,95
1,48
Weight
kg/m
0,60
0,83
1,09
0,91
1,16
1,47
0,91
1,11
1,32
1,54
1,62
1,10
1,21
1,70
1,88
1,02
1,22
1,37
1,51
1,65
1,18
1,52
1,88
2,21
1,13
1,25
1,44
1,65
1,80
1,40
1,65
1,91
2,17
1,27
1,37
1,54
1,62
1,75
1,94
1,49
1,78
2,05
2,32
1,70
2,17
2,50
1,69
2,09
2,26
2,55
1,99
2,34
2,64
2,15
2,65
3,15
3,08
3,73
4,38
2,56
3,52
4,32
5,03
3,64
4,75
6,51
Tube
OD
Wall
Strip
Size
Fins
Diam. Fins/m
38
2,6
26 x 1
90
38
2,6
30 x 1
98
38
2,6
35 x 1
108
44,5
2,6
26 x 1
96,5
44,5
2,6
30 x 1
104,5
44,5
2,6
35 x 1
114,5
48,3
2,6
26 x 1
100,3
48,3
2,6
30 x 1
108,3
48,3
2,6
35 x 1
118,3
57
2,9
30 x 1
117
57
2,9
35 x 1
127
57
2,9
50 x 1
157
76,1
2,9
30 x 1
136,1
76,1
2,9
35 x 1
146,1
76,1
2,9
50 x 1
176,1
88,9
3,2
35 x 1
158,9
88,9
3,2
50 x 1
188,9
108
3,6
35 x 1
178
108
3,6
40 x 1
188
108
3,6
50 x 1
208
40
80
123
48
83
128
48
88
120
50
85
120
44
72
120
50
70
105
40
85
155
62,5
91
115
50
70
90
67
92
117
140
52
72
92
112
33
40
52,5
63
77
98
110
44
61
78
96
36
45
56
55
71
87
35
50
65
47
62
76
51
69
86
30
45
62
Surface
Area
0,64
1,17
1,74
0,91
1,49
2,24
1,14
2,00
2,68
0,84
1,34
1,84
0,91
1,41
2,26
1,27
1,72
2,51
0,74
1,40
2,43
1,29
1,82
2,26
1,32
1,78
2,25
1,50
2,00
2,50
2,95
1,48
1,98
2,49
2,99
1,64
1,95
2,50
1,69
2,01
2,49
2,77
1,50
2,00
2,50
3,00
2,03
2,48
3,02
2,00
2,51
3,01
2,14
2,95
3,75
1,99
2,52
3,01
2,50
3,27
3,99
2,10
2,98
3,98
Weight
kg/m
4,01
5,73
7,58
4,88
6,77
9,20
5,62
8,40
10,62
5,00
6,61
8,23
5,22
6,84
9,61
6,38
7,85
10,42
4,86
7,02
10,37
6,69
8,40
9,81
6,75
8,27
9,79
8,21
9,83
11,44
12,93
8,14
9,78
11,42
13,04
8,66
9,67
11,47
10,01
11,05
12,62
13,52
8,58
11,30
12,60
14,30
11,00
12,56
14,33
12,43
14,06
15,70
12,88
15,49
18,09
14,71
16,42
18,03
16,37
18,86
21,22
15,06
17,93
21,18
79
Tube
OD
30.11.2007
10:06 Uhr
Seite 80
TECHNIFIN Type N
d1
d5
d4
+0
-0,2
+0
-0,2
0,15
d4
stripped
+0
-0,2
S1
S2
L2
L3
L4
L5
L1
10%
10%
+5
-0
+5
-0
3 mm
+1
-0
< 2000 mm + 2 mm
2000 - 8000 mm + 1
max. 5 mm
> 8000 mm + 0,7
Materials
Please refer to the Alloy table for fintubes TECHNIFIN Type N
and M
Fields of application
Chemical-, Petrochemical- and Petroleum Industries. Used in condensers, oilcoolers, waterheaters, heatexchangers, evaporators
and heat-recoverers.
Manufacturing process
The fins are rolled out of the wall of the plain tube by use of a
pass roller. Tube and fin consist of one piece.
Surfaces
can be pickled or tinned upon request.
Certificate:
DIN 50049/3.1 B or
DIN 50049/3.1 C
80
Advantages
Economical solution of heatexchange problems of media with different heat conduction abilities or different current conditions.
High chemical-, thermal- and mechanical resistance, suitable for
rough working conditions.
30.11.2007
10:06 Uhr
Seite 81
TECHNIFIN Type N
Standard Size Range
16 FINS/ INCH FIN PITCH M = 1.59
Code
No.
TECHNIFIN
N
16.1/2.19
16.1/2.18
16.5/8.17
16.5/8.16
16.3/4.17
16.3/4.16
16.3/4.14
16.7/8.17
16.7/8.16
16.7/8.14
16.1.17
16.1.16
16.1.14
Finned section
External
S1
d2
mm
Int.
d3
Root dia.
Ext.
d4
mm
mm
mm
9,80
9,40
11,90
11,60
15,00
14,70
14,00
18,20
17,90
17,20
21,40
21,10
20,40
1,45
1,65
2,00
2,15
2,00
2,15
2,50
2,00
2,15
2,50
2,00
2,15
2,50
Int.
Inch
d1
mm
1/2"
12,70
5/8"
15,90
3/4"
19,00
7/8"
22,20
1"
25,40
Wall-thickn.
7,50
7,00
9,70
9,40
12,80
12,50
11,60
16,00
15,70
14,80
19,20
18,90
18,00
Ext.
Wall-thickn.
BWG
d5
mm
9,50
12,50
12,70
15,70
15,80
18,80
19,00
22,00
22,20
25,20
19
18
17
16
17
16
14
17
16
14
17
16
14
S2
mm
1,00
1,25
1,50
1,65
1,50
1,65
2,10
1,50
1,65
2,10
1,50
1,65
2,10
Aa
m2/m
Aa/Ai
0,08
3,6
3,8
3,6
3,7
3,3
3,4
3,6
3,1
3,2
3,3
3,0
3,1
3,2
0,11
0,13
0,16
0,18
Weight
G Cu
ca. kg/m
0,38
0,43
0,65
0,69
0,83
0,88
1,03
1,00
1,06
1,25
1,18
1,25
1,49
19.1/2.21
19.1/2.20
19.1/2.19
19.1/2.18
19.5/8.21
19.5/8.20
19.5/8.19
19.5/8.18
19.5/8.17
19.5/8.16
19.3/4.20
19.3/4.19
19.3/4.18
19.3/4.17
19.3/4.16
19.3/4.14
19.7/8.19
19.7/8.18
19.7/8.17
19.7/8.16
19.7/8.14
19.1.18
19.1.17
19.1.16
19.1.14
Int.
External
Inch
Finned section
d1
mm
1/2"
12,70
5/8"
15,90
3/4"
19,00
7/8"
22,20
1"
25,40
Wall-thickn.
S1
d2
mm
mm
10,30
10,10
9,90
9,50
13,40
13,20
13,00
12,60
11,90
11,60
16,30
16,10
15,70
15,00
14,80
14,10
19,30
18,90
18,20
18,00
17,30
22,10
21,40
21,10
20,50
1,20
1,30
1,40
1,60
1,25
1,35
1,45
1,65
2,00
2,15
1,35
1,45
1,65
2,00
2,10
2,45
1,45
1,65
2,00
2,10
2,45
1,65
2,00
2,15
2,45
Ext.
Int.
d3
Root dia.
Ext.
d4
mm
mm
mm
7,90
7,70
7,50
7,00
11,10
10,90
10,70
10,20
9,70
9,40
14,00
13,80
13,30
12,80
12,50
11,60
17,00
16,50
16,00
15,70
14,80
19,70
19,20
18,90
18,00
Wall-thickn.
BWG
d5
9,50
12,50
12,70
15,70
15,80
18,80
19,00
22,00
22,20
25,20
21
20
19
18
21
20
19
18
17
16
20
19
18
17
16
14
19
18
17
16
14
18
17
16
14
S2
mm
0,80
0,90
1,00
1,25
0,80
0,90
1,00
1,25
1,50
1,65
0,90
1,00
1,25
1,50
1,65
2,10
1,00
1,25
1,50
1,65
2,10
1,25
1,50
1,65
2,10
Aa
m2/m
Aa/Ai
0,1
4,0
4,1
4,2
4,5
3,6
3,7
3,8
4,0
4,2
4,3
3,5
3,6
3,7
3,8
3,9
4,2
3,4
3,5
3,6
3,7
3,9
3,4
3,5
3,6
3,7
0,12
0,15
0,18
0,21
Weight
G Cu
ca. kg/m
0,32
0,34
0,38
0,42
0,44
0,47
0,51
0,58
0,69
0,74
0,61
0,63
0,72
0,83
0,88
1,03
0,80
0,89
1,00
1,07
1,26
1,05
1,19
1,27
1,50
26.1/2.21
26.1/2.19
26.1/2.18
26.5/8.21
26.5/8.19
26.5/8.18
26.3/4.20
26.3/4.19
26.3/4.18
26.7/8.19
26.7/8.18
26.7/8.17
26.1.18
26.1.17
26.1.16
External
Inch
Finned section
Int.
Wall-thickn.
S1
Int.
d3
Root dia.
Ext.
d4
mm
mm
mm
d1
mm
1/2"
12,70
5/8"
15,90
3/4"
7/8"
22,20
1"
25,40
d2
mm
10,30
9,90
9,50
13,40
13,00
12,60
16,30
16,10
15,70
19,30
18,90
18,20
22,10
21,40
21,10
1,20
1,40
1,60
1,25
1,45
1,65
1,35
1,45
1,65
1,45
1,65
2,00
1,65
2,00
2,15
7,90
7,50
7,00
11,10
10,70
10,20
14,00
13,80
13,30
17,00
16,50
16,00
19,70
19,20
18,90
Ext.
Wall-thickn.
BWG
d5
mm
9,50
12,50
12,70
15,70
15,80
18,80
19,00
22,00
22,20
25,20
21
19
18
21
19
18
20
19
18
19
18
17
18
17
16
S2
mm
0,80
1,00
1,25
0,80
1,00
1,25
0,90
1,00
1,25
1,00
1,25
1,50
1,25
1,50
1,65
Aa
m2/m
0,12
0,16
0,20
0,23
0,27
Aa/Ai
5,0
5,3
5,8
4,6
4,8
5,0
4,5
4,6
4,8
4,4
4,5
4,7
4,4
4,5
4,6
Weight
G Cu
ca. kg/m
0,34
0,40
0,45
0,46
0,53
0,60
0,63
0,67
0,77
0,81
0,93
1,04
1,09
1,23
1,31
Weights are based on SF-Cu Copper. For other materials please apply the following conversion factors: CuNi 70/30: 1.0, CuNi 90/10: 1.0, Aluminium Brass: 0.93,
Admiralty Brass: 0.96, Aluminium: 0.31, Steel: 0.88
81
Plain section
30.11.2007
10:06 Uhr
Seite 82
TECHNIFIN Type M
d1
d3
+0
-0,2
0,13
d4
stripped
+0
-0,2
S1
S2
L2
L1
10%
10%
+5
-0
up to 2000 mm + 2 mm
2000 - 8000 mm + 1 , max. 5 mm
over 8000 mm + 0,7
Fields of application
Water heating, solar technics, oil-cooling, heat-exchangers,
condensers, evaporators.
Manufacturing process
The fins are rolled out of the wall of the plain tube as type N,
but higher fins.
Advantages
Economical solution of heat-exchange problems of media with
different heat conduction abilities or different current conditions. High chemical-, thermal- and mechanical resistance, suitable for rough working conditions.
82
30.11.2007
10:06 Uhr
Seite 83
TECHNIFIN Type M
Standard Size Range
External
Int.
Wall-thickn.
d1
mm
d2
mm
S1
mm
13,00
13,00
16,00
16,00
18,00
18,00
22,00
22,00
28,00
28,00
9,40
9,00
12,40
12,00
14,00
13,50
18,00
17,50
23,50
23,00
1,80
2,00
1,80
2,00
2,00
2,25
2,00
2,25
2,25
2,50
Alloys:
Weight Conversion factor:
SF-Cu
1,0
Root dia.
Ext.
Int.
d3
Ext.
d4
d5
mm
mm
mm
7,90
7,50
10,90
10,50
12,50
12,00
16,50
16,00
22,00
21,50
BWG
9,50
9,50
12,50
12,50
14,50
14,50
18,50
18,50
24,50
24,50
CuAsP
1,0
Wall-thickn.
Ext. surface
Radio outs.
to ins.
Weight
Aa
m2/m
Aa/Ai
G Cu
ca. kg/m
0,16
0,16
0,19
0,19
0,21
0,21
0,27
0,27
0,34
0,34
6,5
6,7
5,6
5,8
5,4
5,6
5,2
5,4
4,9
5,1
S2
mm
16,50
16,50
19,50
19,50
21,50
21,50
25,50
25,50
31,50
31,50
21
19
21
19
19
18
19
18
18
17
CuNi10Fe
1,0
0,80
1,00
0,80
1,00
1,00
1,25
1,00
1,25
1,25
1,50
Al 99,5
0,31
AlMn
0,31
0,50
0,53
0,61
0,67
0,77
0,85
0,96
1,06
1,45
1,60
AlMg 3
0,31
Designation
DIN*
DIN 17007
Weight
Tensile strength
Rm min.
G/G Cu
N/mm2
Finned section
Tensile str.
State
Rm
N/mm2
2.0090
SF-Cu
1787
1,00
220
50-120
40
350
1,3
2.1491
CuAsP
17666
1,00
220
50-120
40
350
1,3
2.0470
CuZn28Sn
17660
0,96
320
100-170
55
340
2.0460
CuZn20AI
17660
0,93
340
120-180
55
340
2.0872
CuNi10Fe
17664
1,00
290
90-180
30
400
1,3
2.0882
CuNi30Fe
17664
1,00
370
120-220
35
500
1,3
3.0255
AI99,5
1712
0,30
100
70
130
3.3535
AIMg3
1725
0,30
180
80
12
230
3.0515
AIMn
1725
0,31
125
90
160
1.4301
5 CrNi 18 9
17440
0,88
500
185
25
700
1,3
1.4571
10 CrNiMoTi
17440
0,88
500
185
25
700
1,3
1.0308
St35
1629
0,88
350
240
25
500
1,2,3,
1.0305
St35.8
17175
0,88
360
235
25
500
1,2,3,
83
Fins per inch : 11 Fin-height: h=3,5 mm 0,35 mm Fin thickness ~ 0,3 mm Length max. 12,0 m
30.11.2007
10:06 Uhr
Seite 84
Fields of application
Fired Heaters, Heat Exchangers, Boilers, Pre-Heaters, Coolers,
Heat Pipes, Dryers, Heaters
Manufacturing process
The fin strip is spirally wound onto the tube and welded continuously to the tube along the spiral foot.
Welding process: HF, SF, TIG, MIG
For type WOS find are serrated.
84
Advantage
Type WO
Strong connection between fin and base tube, prevents loosening of fin because of heat stress, oxydization, corrosion etc.
Use at very high temperatures possible.
Type WOS
As per Type WO, but fins are serrated. Therefore higher heat
transfer coefficient, for the same pressure drop compared with
WO-fin.
30.11.2007
10:07 Uhr
Seite 85
Materials
Base tube
Fins
Carbon Steel
Low Alloy Steel
Stainless Steel
Nickel Alloys
Carbon Steel
Low Alloy Steel
Ferritic Stainless Steel
Austenitic Stainless Steel
Nickel Alloys
HTS
da
HR
b
N
106
=
=
=
=
=
[ 10 da + 2N HR (HR + da) -N da b ]
3
85
30.11.2007
10:07 Uhr
Seite 86
TECHNIFIN Type WO
Finned Steel Tubes with Welded-on Fins Standard Programme
Core Tubes
Wall Surface Weight
thickn area
Fk
da
s
Gk
m2/m
kg/m
mm mm
O.D.
16
1,8
21,3 2
25
31,8 2,6
38
0,05
0,63
0,07
0,95
0,08
0,10
1,13
1,87
3,2
0,12
2,75
48,3 3,2
0,15
3,56
51
3,2
0,16
3,77
57
3,2
0,18
4,24
60,3 3,2
0,19
4,5
Number of fins
N
per
m
per
inch
250
200
150
118
100
250
200
150
118
100
250
200
150
118
100
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
6,35
5
3,8
3
2,5
6,35
5
3,8
3
2,5
6,35
5
3,8
3
2,5
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
2,72
2,30
1,88
1,64
1,47
3,46
2,96
2,46
2,14
1,96
3,94
3,38
2,82
2,46
2,26
4,55
3,88
3,46
3,22
2,95
5,82
5,05
4,56
4,29
3,98
7,30
6,36
5,76
5,43
5,06
7,68
6,70
6,08
5,73
5,34
8,54
7,47
6,78
6,39
5,96
9,01
7,88
7,16
6,76
6,31
13 x 1,3
m2/m kg/m
15 x 1,3
m2/m
kg/m
19 x 1,5
m2/m
kg/m
25 x 1,5
m2/m kg/m
0,83
0,68
0,53
0,43
0,38
0,81
0,63
0,52
0,45
0,38
0,92
0,72
0,59
0,52
0,44
1,11
0,87
0,72
0,63
0,54
1,16
0,91
0,75
0,66
0,56
1,28
1,00
0,83
0,73
0,62
1,34
1,05
0,87
0,76
0,65
0,96
0,74
0,61
0,53
0,44
1,09
0,85
0,69
0,60
0,51
1,31
1,02
0,83
0,73
0,61
1,36
1,06
0,87
0,76
0,64
1,49
1,16
0,95
0,84
0,70
1,56
1,22
1,00
0,88
0,74
1,44
1,11
0,90
0,78
0,65
1,71
1,32
1,07
0,93
0,78
1,78
1,38
1,12
0,97
0,81
1,94
1,50
1,22
1,06
0,88
2,03
1,57
1,27
1,11
0,93
2,50
1,92
1,54
1,33
1,10
2,70
2,07
1,67
1,44
1,19
2,81
2,16
1,74
1,50
1,24
5,09
4,30
3,51
3,01
2,72
5,61
4,67
4,08
3,74
3,37
7,00
5,93
5,26
4,87
4,45
8,67
7,39
6,57
6,11
5,61
9,10
7,77
6,92
6,44
5,91
10,1
8,62
7,69
7,16
6,58
10,6
9,09
8,11
7,56
6,95
6,37
5,25
4,53
4,13
3,68
7,84
6,57
5,76
5,30
4,79
9,64
8,12
7,15
6,60
6,00
10,1
8,53
7,52
6,95
6,31
11,2
9,44
8,33
7,71
7,02
11,7
9,94
8,78
8,13
7,40
10,8
8,76
7,48
6,76
5,96
13,0
10,7
9,14
8,29
7,35
13,6
11,2
9,58
8,69
7,71
14,9
12,3
10,6
9,59
8,52
15,7
12,9
11,1
10,1
8,97
17,8
14,3
12,1
10,8
9,4
19,4
15,6
13,2
11,8
10,3
20,3
16,3
13,8
12,4
10,8
Formula for Calculation of Fin Tube Weight: - Carbon Steel kg/m = 7,85
106
da
=
s
=
b
=
N
=
HR
=
This is a simplified formula and should be used as estimation only, since manufacturing tolerances are not considered
Factor other than Carbon Steel:
Type 304/310/316/321: 1.024
Techalloy 600/625:
1.073
86
30.11.2007
10:07 Uhr
Seite 87
TECHNIFIN Type WO
Finned Steel Tubes with Welded-on Fins Standard Programme
Wall
thickn
da
s
mm mm
Surface Weight
area
Gk
Fk
m2/m kg/m
76,1
3,2
0,24
5,75
88,9
3,2
0,28
6,76
101,6 3,6
0,32
8,70
114,3 3,6
0,36
9,82
141,3 4,0
0,44 13,5
159
4,5
0,50 17,14
168,3 4,5
0,53 18,17
193,7 5,4
0,61 25,06
219,1 5,9
0,69 31,01
Number of fins
N
per
m
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
200
150
118
100
80
per
inch
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
5
3,8
3
2,5
2
Core Tubes
O.D.
10 x 1,3
m2/m kg/m
1,26
1,00
0,84
0,75
0,65
1,45
1,16
0,97
0,86
0,75
1,64
1,31
1,10
0,98
0,85
11,3
9,89
9,01
8,51
7,96
13,1
11,5
10,5
9,93
9,30
15,9
14,1
12,9
12,3
11,6
13 x 1,3
m2/m kg/m
1,63
1,28
1,06
0,94
0,80
1,87
1,47
1,22
1,08
0,92
2,11
1,66
1,37
1,21
1,04
2,34
1,85
1,53
1,35
1,15
2,85
2,25
1,86
1,65
1,41
3,18
2,51
2,08
1,84
1,57
3,35
2,65
2,19
1,94
1,66
3,83
3,02
2,51
2,22
1,90
4,30
3,40
2,82
2,49
2,13
13,2
11,3
10,1
9,46
8,72
15,3
13,1
11,8
11,0
10,2
18,3
15,9
14,3
13,5
12,5
20,4
17,8
16,1
15,1
14,1
26,4
23,2
21,1
19,0
18,7
31,5
27,9
25,6
24,3
22,9
33,3
29,5
27,1
25,7
24,2
42,3
38,0
35,2
33,7
32,0
50,3
45,5
42,4
40,7
38,7
15 x 1,3
m2/m
kg/m
1,89
1,48
1,22
1,07
0,90
2,16
1,69
1,39
1,22
1,03
2,43
1,91
1,57
1,38
1,17
2,70
2,12
1,74
1,53
1,30
3,27
2,57
2,11
1,86
1,58
3,65
2,86
2,36
2,07
1,76
3,85
3,02
2,49
2,19
1,86
4,38
3,44
2,84
2,50
2,12
4,92
3,86
3,19
2,80
2,38
14,5
12,3
10,9
10,1
9,26
16,8
14,3
12,7
11,8
10,8
19,9
17,1
15,3
14,3
13,2
22,3
19,2
17,2
16,0
14,8
28,6
24,8
22,4
21,1
19,6
33,9
29,7
27,0
25,5
23,8
35,8
31,4
28,6
27,0
25,2
45,1
40,1
36,9
35,1
33,1
53,2
47,9
44,3
42,3
40,0
19 x 1,5
m2/m
kg/m
2,44
1,89
1,54
1,34
1,12
2,77
2,15
1,75
1,53
1,28
3,10
2,41
1,96
1,71
1,43
3,43
2,66
2,17
1,90
1,59
4,14
3,21
2,62
2,29
1,92
4,60
3,57
2,92
2,55
2,14
4,84
3,76
3,07
2,68
2,25
5,50
4,28
3,50
3,06
2,57
6,16
4,80
3,92
3,43
2,88
19,1
15,8
13,6
12,4
11,1
21,9
18,1
15,7
14,3
12,8
25,6
21,4
18,7
17,2
15,5
28,6
23,9
20,9
19,2
17,3
36,1
30,4
26,8
24,8
22,6
42,2
35,9
31,9
29,6
27,1
44,5
37,9
33,7
31,3
28,7
55,0
47,5
42,7
40,0
37,0
64,5
56,1
50,7
47,7
44,4
25 x 1,5
m2/m kg/m
3,34
2,57
2,07
1,79
1,48
3,77
2,90
2,34
2,03
1,68
4,20
3,23
2,61
2,26
1,87
4,63
3,56
2,88
2,49
2,07
5,53
4,26
3,45
2,99
2,48
6,13
4,72
3,82
3,31
2,75
6,44
4,96
4,02
3,48
2,89
7,29
5,62
4,55
3,95
3,28
8,15
6,28
5,09
4,42
3,67
24,4
19,8
16,8
15,1
13,2
27,8
22,6
19,2
17,3
15,2
32,1
26,3
22,5
20,4
18,1
35,6
29,1
25,0
22,7
20,1
44,3
36,6
31,7
28,9
25,8
51,2
42,7
37,2
34,2
30,8
53,9
45,0
39,3
36,0
32,5
65,5
55,4
48,9
45,3
41,2
76,1
64,9
57,6
53,6
49,1
Many other
sizes upon
request ask TPS!
Dimensions
Core tubes:
Fin design
free ends
End shapes
plain
calibrated
bevelled for welding on one side to DIN 2559
bevelled for welding on both sides or ANSI B 16.25
87
30.11.2007
10:07 Uhr
Seite 88
Advantage
Inside diameter:
Wall thickness:
W.T. ratio:
Lenght:
Fin dia:
29 - 110 mm
3.2 - 20 mm
approx 10% O.D.
max. 11 - 12 meter
max. 200 mm
Eccentricity:
max. 10%
Max. torsion
up to 6 mtr-L = 1,5 mm
6 - 8 mm-L = 2.25 mm
8 mtr and longer-L = 3.0 mm
max. 0,2%
on total length
Straightness:
Field of application
Boiler water wall constructions
Water power plants
Atomic power stations
Steam generators
Gas recuperators
Flue tube boilers
Fuel element coils
88
Materials
Mainly Carbon Steels, Ferritic Alloy and Austenitic Stainless
Steel, Nickel Alloy
Manufacturing Process
Hot-extrusion process
Cold drawn process
30.11.2007
10:07 Uhr
Seite 89
d
25,0
26,9
30,0
31,8
33,7
38,0
42,4
44,5
48,3
51,0
57,0
60,3
63,5
70,0
76,1
Width
of profile
e
36,0
37,5
42,5
45,0
47,5
45,0
47,5
50,0
45,0
47,5
50,0
50,0
52,5
57,5
52,5
57,5
60,0
60,0
65,0
65,0
70,0
65,0
70,0
70,0
75,0
75,0
80,0
80,0
85,0
85,0
90,0
90,0
95,0
Fin thickness
4,5
5,0
5,6
6,2
Weight kg/m
2,15
2,39
2,72
2,83
2,94
2,90
3,02
3,13
2,88
3,14
3,26
3,55
3,69
3,97
2,33
2,59
2,95
3,06
3,17
3,16
3,27
3,38
3,15
3,41
3,53
3,86
4,00
4,28
4,15
4,42
4,56
4,69
4,98
5,11
5,40
5,23
5,55
b1
2,50
2,78
3,17
3,28
3,39
3,39
3,51
3,62
3,41
3,67
3,79
4,16
4,30
4,58
4,49
4,76
4,90
5,06
5,35
5,52
5,81
5,66
5,98
6,21
6,52
6,64
6,95
7,07
7,38
7,73
8,07
8,28
8,61
2,71
2,98
3,41
3,52
3,63
3,65
3,77
3,88
3,69
3,95
4,07
4,49
4,63
4,91
4,87
5,14
5,28
5,46
5,75
5,96
6,25
6,13
6,45
6,75
7,06
7,22
7,53
7,68
7,99
8,42
8,76
9,03
9,36
2,90
3,20
3,66
3,77
3,88
3,93
4,05
4,16
4,00
4,26
4,38
4,85
4,99
5,27
5,29
5,56
5,70
5,91
6,20
6,45
6,74
6,67
6,98
7,35
7,66
7,87
8,18
8,37
8,68
9,19
9,53
9,88
10,21
3,44
3,95
4,06
4,17
4,23
4,35
4,46
4,33
4,59
4,71
5,25
5,39
5,67
5,75
6,02
6,16
6,39
6,68
7,00
7,39
7,24
7,56
8,02
8,33
8,68
8,89
9,13
9,44
10,03
10,37
10,82
11,15
3,71
4,28
4,39
4,50
4,60
4,72
4,83
4,73
4,99
5,11
5,37
5,51
5,79
6,30
6,57
6,81
6,99
7,28
7,66
7,95
7,95
8,27
8,85
9,16
9,47
9,78
10,07
10,38
11,10
11,44
12,01
12,34
b2
4,5
5,0
5,5
6,0
5
5
5,0
6,0
5,0
6,5
5,5
7,0
6,0
8,0
6,0
8,0
6,5
8,5
6,5
8,5
7,0
9,0
7,0
9,0
7,0
9,0
7,0
9,0
7,5
9,5
7,5
9,5
In addition to longitudinal fin tubes, sections of many shapes can be produced by hot extrusion with two or more internal and/or
external fins in the size range mentioned on the left page.
89
Tube
30.11.2007
10:07 Uhr
Seite 90
Size Range
As per opposite page
Fields of application
Chemical-, Petrochemical-, Oil-,
Power Industry
Heat-Exchangers
Fired Heaters
Gas Coolers and Heaters
Tank Heaters
Manufacturing process
The longitudinal I/L or U fins are welded onto the base tubed
by resistance welding or welding with filler metal.
Advantage
Increase of heat transfer rates for viscous liquids. Perforated
fin type used whenever drainage of liquid from fin channels
become a problem. Widely used in horizontal heat-ex hangers.
Material
Carbon Steel
Alloy Steel
Stainless Steel
Nickel Alloy
Other Alloys
90
30.11.2007
10:07 Uhr
Seite 91
O.D. or
Nominal
Pipe Size
Fin Height
1"
No. of
Fins
Fin Height - mm
6.35
12.7
19.05
25.4
O.D. or
Nominal
Pipe Size
1/4"
1/2"
3/4"
3/4" O.D.
0.863
1.529
2.196
2.863
16
0.2627
0.4654
0.6685
0.8715
19.05 mm
7/8" O.D.
0.895
1.562
1.062
2.229
1.895
2.896
2.729
16
3.562
0.2724
20
0.4755
0.3233
0.6785
0.5768
0.8816
0.8307
22.22 mm
1.0843
1" O.D.
0.928
1.595
1.095
1.262
2.262
1.928
2.262
2.928
2.762
3.262
16
3.595
4.262
0.2825
20
24
0.4855
0.3333
0.3842
0.6886
0.5869
0.6886
0.8913
0.8408
0.9930
25.4 mm
1.0944
1.2974
3/4" I.P.S.
1.05" O.D.
0.941
1.108
1.608
1.941
1.275
2.275
2.775
2.275
2.942
3.608
3.275
16
20
4.275
0.2865
0.3373
24
0.4895
0.5909
0.3881
0.6925
0.8447
0.6925
0.8956
1.0983
0.9970
3/4" I.P.S.
26.67 mm
1.3014
1 1/2" I.P.S.
1.9" O.D.
1.497
1.830
2.497
3.163
2.163
3.497
4.497
3.830
4.497
5.830
5.497
24
32
7.163
0.4557
0.5571
40
0.7601
0.9629
0.6584
1.0645
1.3689
1.1659
1.3689
1.7747
1.6734
1 1/2" I.P.S.
48.26 mm
2.1805
2" I.P.S.
2.375" O.D.
1.955
2.288
3.288
3.955
4.622
5.622
5.956
7.288
32
40
0.5951
0.6965
1.0009
1.2040
1.4070
1.7114
1.8131
2.2186
2" I.P.S.
60.32 mm
OBSTRUCTION - mm2
Fin Height
Fin Height - mm
1/4"
1/2"
3/4" O.D.
0.6215
0.7791
0.9367
7/8" O.D.
0.7810
0.8259
0.9386
1.0229
1" O.D.
0.9651
1.0100
1.0549
3/4" I.P.S.
1.05" O.D.
O.D. or
Nominal
Pipe Size
No. of
Fins
6.35
12.7
19.05
25.4
1.0943
16
400.97
502.64
604.32
706.00
19.05 mm
1.0962
1.2199
1.2538
1.4169
16
20
503.87
532.84
605.55
659.93
707.22
787.03
808.90
914.13
22.22 mm
1.1227
1.2070
1.2913
1.2803
1.4040
1.5277
1.4379
1.6010
1.7641
16
20
24
622.64
651.61
680.58
724.32
778.71
833.10
826.00
905.80
985.61
927.68
1032.90
1138.13
25.4 mm
1.0456
1.0905
1.1354
1.2032
1.2875
1.3718
1.3608
1.4845
1.6082
1.5184
1.6815
1.8446
16
20
24
674.58
703.55
732.51
776.26
830.64
885.03
877.93
957.74
1037.55
979.61
1084.84
1190.06
3/4" I.P.S.
26.67 mm
1 1/2" I.P.S.
1.9" O.D.
3.1048
3.1946
3.2845
3.3412
3.5098
3.6785
3.5776
3.8250
4.0725
3.8140
4.1402
4.4665
24
32
40
2003.09
2061.03
2119.03
2155.61
2264.38
2373.22
2308.12
2467.74
2627.41
2460.64
2671.09
2882.61
1 1/2" I.P.S.
48.26 mm
2" I.P.S.
2.375" O.D.
4.7894
4.8793
5.1046
5.2733
5.4198
5.6673
5.7350
6.0613
32
40
3089.93
3147.93
3293.28
3402.12
3496.64
3656.31
3699.99
3910.51
2" I.P.S.
60.32 mm
3/4"
KEY TO TABLES:
1"
91
30.11.2007
10:07 Uhr
Seite 92
TECHNIFIN Type S
TechniFin Typ S
Manufacturing Process:
31.8 - 57 mm
60 - 145 mm
12.5 - 50 mm
1 - 10 mm
2 - 3 mm
Advantages:
High efficiency / Minimum power loss / easy cleaning
Field of application:
Economisers, Biolers, Heat Exchangers.
Often used in non-corrosive gas streams, minimal resistance to
gas flow and the straight gas paths inhibit fouling and ease
cleaning.
92
30.11.2007
10:07 Uhr
Seite 93
Manufacturing Process:
31.8 - 57 mm
60 - 175 mm
10 - 30 mm
1 - 10 mm
2 - 3 mm
Advantages:
High efficiency / Minimum power loss / easy cleaning
Field of application:
Economisers, Biolers, Heat Exchangers.
Often used in non-corrosive gas streams, minimal resistance to
gas flow and the straight gas paths inhibit fouling and ease
cleaning.
93
30.11.2007
10:07 Uhr
Seite 94
Advantages
Due to their high rigidity, studded tubes can be used even under
extreme temperature and pressure conditions.
Fields of Application:
Furnaces-, Chemical-, Petrochemical-Industry, Power stations etc.
where liquid media under high pressure are to be heated or cooled.
94
Manufacturing Process:
Studs are fully automatically welded onto the tube by resistance
welding.
30.11.2007
10:07 Uhr
Seite 95
Outside Diameter
mm
Wallthickness
Max. Number of
Studs per Row
Fi
Aspect Ratio**
at: NB (max.), T = Stand.
d (max.), h (max.)
m2/m
Fi
7
8
10
0,165
0,197
0,245
7,92
7,66
7,66
15
17
18
21
12
13
15
17
0,283
0,321
0,374
0,402
7,88
7,57
7,47
7,84
22
23
25
32
18
19
20
26
0,451
0,471
0,484
0,637
7,44
7,49
7,68
7,60
in.
mm
in.
d = 8 mm
60,3
73,0
88,9
2.375
2.875
3.500
3,9
5,2
5,5
0.154
0.203
0.216
9
10
13
101,6
114,3
127,0
141,3
4.000
4.500
5.000
5.563
5,7
6,0
4,0
6,6
0.226
0.237
0.156
0.258
152,4
159,0
168,3
219,1
6.000
6.260
6.625
8.625
4,5
4,5
7,1
8,2
0.179
0.179
0.281
0.322
d = 12,7 mm
* The Standard Tube Dimensions given in the above table are taken from typical orders. 0f course, we produce studded tubes also
with other base tube dimensions in the range 60,3 up to 219,1 mm Outside Diameter.
** Calculation of Aspect Ratio:
Fi = d x h x NB x NRm + Da
Di
Materials:
Base Tube & Studs
Carbon Steel
Low Alloy Steel
Stainless Steel
Length:
Studs:
Type of Studs:
Cylindrical , elliptical or lens type
95
30.11.2007
10:28 Uhr
Seite 96
M S Plain Plates
Thickness (mm)
Section Weight
Kg/Sp Metre
Kg/Sq Foot
4.3
4.6
5
6
7
33.7
36.0
39.2
47.1
55.0
3.13
3.34
3.64
4.38
5.11
8
9
10
11
12
62.8
70.7
78.5
86.3
94.2
5.83
6.56
7.29
8.01
8.75
14
16
18
20
22
109.0
125.6
141.3
157.0
172.7
10.13
11.67
13.13
14.58
16.04
25
28
30
32
36
196.2
219.8
235.5
251.2
282.6
18.23
20.42
21.88
23.33
26.25
40
45
50
56
63
314.0
353.2
392.5
439.6
494.5
29.17
32.81
36.46
40.84
45.94
70
75
80
90
100
549.5
588.75
628.0
706.5
785.0
51.05
54.69
58.34
65.63
77.92
110
120
863.5
942.0
80.21
87.51
M S Chequered Plates
Thickness (mm)
5
6
7
8
10
12
96
Section Weight
kg/Sq Metre
45.3
53.2
61.1
68.8
84.6
100.3
Kg/Sq Foot
4.21
4.94
5.68
6.39
7.68
9.32
30.11.2007
10:28 Uhr
Seite 97
M S Sheets
Thickness
in mm
B.G
Section Weight
Kg/Sq Metre
Kg/Sq Foot
4.00
3.55
3.15
2.80
2.50
8
9
10
11
12
31.40
27.80
24.75
22.00
19.61
2.92
2.58
2.30
2.04
1.82
2.30
2.00
1.80
1.60
1.40
13
14
15
16
17
18.00
15.70
14.15
12.56
11.00
1.67
1.46
1.31
1.17
1.02
1.25
1.10
1.00
0.90
0.80
18
19
20
21
22
9.81
8.60
7.85
7.05
6.28
0.91
0.80
0.73
0.65
0.58
0.70
0.63
0.55
0.50
0.45
23
24
25
26
27
5.50
4.94
4.30
3.92
3.50
0.51
0.46
0.40
0.36
0.33
0.40
0.35
0.30
28
29
30
3.15
2.75
2.35
0.29
0.26
0.22
97
30.11.2007
10:28 Uhr
Seite 98
Floor Plates
Quintett Pattern
Plate Size
in mm
6 mm
8 mm
10 mm
12,5 mm
Weight per
Square metre
26,19k
37,97k
49,74k
65,44k
81,14k
100,77k
2000 x 1000
2500 x 1250
3000 x 1500
4000 x 1750
4000 x 2000
6000 x 2000
53
82
118
184
210
314
76
119
171
266
304
456
100
156
224
349
397
597
163
254
366
568
649
974
202
315
454
706
806
1209
Duett Pattern
Quintett Pattern
131
205
295
459
524
785
Diamond Pattern
Tear-Drop Pattern
m/tonne
400
341
284
243
213
192
170
142
106
85
Description
m/tonne
278
236
197
169
148
133
118
99
74
59
Width
743
908
1070
98
610 5
762 5
908 6
30.11.2007
10:28 Uhr
Seite 99
99
30.11.2007
10:28 Uhr
Seite 100
Profiles
Round, Square, Hexagonal, Octagonal
Weight Table
m/m
Round
Square
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
0.006
0.024
0.055
0.098
0.158
0.220
0.300
0.392
0.496
0.612
0.740
0.880
1.040
1.190
1.370
1.570
1.770
1.980
2.200
2.440
2.690
2.960
3.230
3.520
3.820
4.130
4.460
4.790
5.140
5.500
5.870
6.260
6.650
7.060
7.490
7.920
8.370
8.850
9.300
9.780
10.280
10.790
11.310
11.840
12.390
12.940
13.510
14.090
14.690
15.290
15.290
16.540
17.190
17.840
18.510
19.180
19.880
0.008
0.031
0.070
0.125
0.195
0.280
0.362
0.498
0.631
0.779
0.940
1.120
1.310
1.520
1.750
1.990
2.250
2.520
2.810
3.110
3.430
3.760
4.120
4.480
4.860
5.260
5.670
6.100
6.550
7.000
7.480
7.970
8.480
9.000
9.540
10.090
10.660
11.240
11.800
12.460
13.090
13.730
14.400
15.070
15.770
16.470
17.200
17.940
18.690
19.470
20.287
21.091
21.910
22.744
23.595
24.460
25.342
100
Hex.
0.160
0.250
0.330
0.430
0.550
0.680
0.820
1.000
1.150
1.320
1.520
1.720
1.950
2.200
2.450
2.700
3.000
3.300
3.600
3.900
4.200
4.600
4.900
5.300
5.700
6.100
6.500
6.900
7.300
7.800
8.200
8.700
9.300
9.700
10.200
10.800
11.300
11.900
13.100
13.600
14.300
14.900
15.500
16.200
16.900
17.500
18.200
18.900
19.700
20.500
21.200
22.200
Oct.
1.092
1.266
1.454
1.654
1.867
2.093
2.332
2.584
2.849
3.127
3.418
3.722
4.038
4.368
4.710
5.065
5.434
5.815
6.209
6.616
7.046
7.469
7.915
8.374
10.336
13.244
16.152
19.706
m/m
Round
Square
Hex.
58
59
60
61
62
63
64
65
66
67
68
69
70
72
75
78
80
82
85
88
90
92
95
100
105
110
115
120
125
130
135
140
145
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
380
400
20.580
21.300
22.030
22.770
23.520
24.280
25.060
25.850
26.650
27.460
28.290
29.130
29.980
31.720
34.410
37.220
39.160
41.140
44.200
47.380
49.560
51.780
55.220
61.180
67.250
73.810
80.670
87.840
95.310
103.090
111.170
119.560
128.250
137.250
156.820
176.800
197.900
220.500
244.300
269.300
295.600
323.100
351.800
381.700
412.900
445.200
478.800
513.600
550.600
586.900
625.400
665.100
706.000
748.100
791.600
833.700
978.800
26.239
27.151
28.080
29.023
29.983
30.950
31.940
32.950
33.970
35.010
36.060
37.170
38.220
40.430
43.870
47.450
49.920
52.440
56.350
60.400
63.180
66.010
70.390
77.900
85.990
94.380
103.150
112.320
121.870
131.820
142.150
152.880
163.990
175.500
200.000
225.000
252.100
280.900
311.200
343.100
376.600
411.600
448.100
486.300
525.900
567.200
610.000
654.300
700.200
747.700
796.700
847.200
899.400
953.100
1.008.400
1.116.300
1.248.000
22.700
23.500
24.300
25.200
25.900
26.500
27.600
28.500
29.400
30.600
31.200
32.300
33.100
35.000
38.000
Oct.
23.260
27.460
31.660
36.502
43.200
41.344
49.340
47.160
55.120
52.976
61.560
68.000
74.970
82.380
90.200
97.600
106.520
115.440
124.020
133.000
143.000
153.000
58.792
64.608
71.716
78.824
85.932
93.040
101.120
109.200
117.900
126.600
136.000
145.400
30.11.2007
10:28 Uhr
Seite 101
thickness in mm
width
in
0,06
0,09
0,08
0,12
0,16
0,09
0,14
0,19
0,24
0,13
0,19
0,25
0,32
0,38
10
12
14
15
16
18
20
25
30
35
40
45
50
60
mm
10
0,16
0,24
0,31
0,39
0,47
0,63
0,71
12
0,19
0,28
0,38
0,47
0,57
0,75
0,85
0,94
14
0,22
0,33
0,44
0,55
0,66
0,88
0,99
1,10
1,32
15
0,24
0,35
0,47
0,59
0,71
0,94
1,06
1,18
1,41
1,65
16
0,25
0,38
0,50
0,63
0,75
1,01
1,13
1,26
1,51
1,76
18
0,28
0,42
0,57
0,71
0,85
1,13
1,27
1,41
1,70
1,98
2,12
20
0,31
0,47
0,63
0,79
0,94
1,26
1,41
1,57
1,88
2,20
2,36
2,51
2,83
22
0,34
0,52
0,69
0,86
1,04
1,38
1,55
1,73
2,07
2,42
2,59
2,76
3,11
24
0,38
0,57
0,75
0,94
1,13
1,51
1,70
1,88
2,26
2,64
2,83
3,01
3,39
3,77
25
0,39
0,59
0,79
0,98
1,18
1,57
1,77
1,96
2,36
2,75
2,94
3,14
3,53
3,93
26
0,41
0,61
0,82
1,02
1,23
1,63
1,84
2,04
2,45
2,86
3,06
3,27
3,67
4,08
28
0,44
0,66
0,88
1,10
1,32
1,76
1,98
2,20
2,64
3,08
3,30
3,52
3,96
4,40
5,50
30
0,47
0,71
0,94
1,18
1,41
1,88
2,12
2,36
2,83
3,30
3,53
3,7
4,24
4,71
5,89
32
0,50
0,75
1,00
1,26
1,51
2,01
2,26
2,51
3,01
3,52
3,77
4,02
4,52
5,02
6,28
7,54
1,88
2,26
3,45
35
0,55
0,82
1,10
1,37
1,65
2,20
2,47
2,75
3,30
3,85
4,12
4,40
4,95
5,50
6,87
8,24
40
0,63
0,94
1,26
1,57
1,88
2,51
2,83
3,14
3,77
4,40
4,71
5,02
5,65
6,28
7,85
9,42
11,0
45
0,71
1,06
1,41
1,77
2,12
2,83
3,18
3,53
4,24
4,95
5,30
5,65
6,36
7,07
8,83
10,6
12,4
14,2
50
0,78
1,18
1,57
1,96
2,36
3,14
3,53
3,93
4,71
5,50
5,89
6,28
7,07
7,85
9,81
11,8
13,7
15,7
17,6
55
0,86
1,30
1,73
2,16
2,59
3,45
3,89
4,32
5,18
6,05
6,48
6,91
7,77
8,64
13,0
15,1
17,3
19,4
21,6
60
0,94
1,41
1,88
2,36
2,83
3,77
4,24
4,71
5,65
6,59
7,07
11,8
14,1
16,5
18,8
21,2
65
1,02
1,53
2,04
2,55
3,06
4,08
4,59
5,10
6,12
7,14
7,65
8,16
9,18
10,2
12,8
15,3
17,9
20,4
22,9
25,5
70
1,10
1,65
2,20
2,75
3,30
4,40
4,95
5,50
6,59
77,69
8,24
8,79
9,89
11,0
13,7
16,5
19,2
22,0
24,7
27,5
75
1,18
1,77
2,36
2,94
3,53
4,71
5,30
5,89
7,07
8,24
8,83
9,42
10,6
11,8
14,7
17,7
20,6
23,6
26,5
29,4
80
1,26
1,88
2,51
3,14
3,77
5,02
5,65
6,28
7,54
8,79
9,42
10,0
11,3
12,6
15,7
18,8
22,0
25,1
28,3
31,4
37,7
85
1,33
2,00
2,67
3,34
4,00
5,34
6,01
6,67
8,01
9,34
10,0
10,7
12,0
13,3
16,7
20,0
23,4
26,7
30,0
33,4
40,0
9,89
7,54
8,48
10,8
9,42
23,6
90
1,41
2,12
2,83
3,53
4,24
5,65
6,36
7,07
8,48
10,6
11,3
12,7
14,1
17,7
21,2
24,7
28,3
31,8
35,3
42,4
95
1,49
2,24
2,98
3,73
4,47
5,97
6,71
7,46
8,95
10,4
11,2
11,9
13,4
14,9
18,6
22,4
26,1
29,8
33,6
37,4
44,8
100
1,57
2,36
3,14
3,93
4,71
6,28
7,07
7,85
9,42
11,0
11,8
12,6
14,1
15,7
19,6
23,6
27,5
31,4
35,3
39,3
46,8
110
1,73
2,59
3,45
4,32
5,18
6,91
7,77
8,64
10,4
12,1
13,0
13,8
15,5
17,3
21,6
25,9
30,2
34,5
38,8
43,2
51,8
120
1,88
2,83
3,77
4,71
5,65
7,54
8,48
9,42
11,3
13,2
14,1
15,1
17,0
18,8
23,6
28,3
33,0
37,7
42,4
47,1
56,5
130
2,04
3,06
4,08
5,10
6,12
8,16
9,18
10,2
12,3
14,3
15,3
16,3
18,4
20,4
25,5
30,6
35,7
40,8
45,9
51,0
61,3
140
2,20
3,30
4,40
55,50
6,59
8,79
9,89
11,0
13,2
15,4
16,5
17,0
19,8
22,0
27,5
33,0
38,5
44,0
49,5
55,0
66,0
150
2,36
3,53
4,71
5,89
7,07
160
2,51
3,77
5,02
6,28
7,51
180
2,83
4,24
5,65
7,07
200
3,14
4,71
6,28
7,85
250
3,93
5,89
7,85
300
4,71
7,07
9,42
9,81
11,8
10,6
11,8
14,1
16,5
17,7
18,8
21,2
23,6
29,4
35,3
41,2
47,1
53,0
58,9
70,7
10,1
9,42
11,3
12,6
15,1
17,6
18,8
20,1
22,6
25,1
31,4
37,7
44,0
50,2
56,5
62,8
75,4
8,48
11,3
12,7
14,1
17,0
19,8
21,2
22,6
25,4
28,3
35,3
42,4
49,5
56,5
63,6
70,7
84,8
9,42
12,6
14,1
15,7
18,8
22,0
23,6
25, 1 28,3
31,4
39,3
47,1
55,0
62,8
70,6
78,5
94,2
11,8
15,7
17,7
19,6
23,6
27,5
29,4
31,4
35,3
39,3
49,1
58,9
68,7
78,5
88,3
98,1
118,0
14,1
18,8
21,2
23,6
28,3
33,0
35,3
37,7
42,3
47,1
58,9
70,7
82,4
94,2
106,0
118,0
141,0
101
Weight Table
30.11.2007
10:28 Uhr
Seite 102
Weight
Thickness
kg/m2
0.5
2.28
0.7
3.15
0.8
3.62
1.0
4.52
1.2
5.42
1.5
6.78
2.0
9.04
2.5
11.30
3.0
13.56
3.18
14.31
4.0
18.08
6.0
27.12
8.0
36.13
10.0
45.20
12.0
54.24
12.5
56.50
15.0
67.80
18.0
81
20.0
90.40
25.0
113.00
30.0
135.60
32.0
144.00
35.0
158.20
40.0
180.80
45.0
203.40
50.0
226.00
60.0
271.20
70.0
316.40
102
30.11.2007
10:28 Uhr
Seite 103
kg/m
h
mm
b
mm
Dimensions
a
mm
Section
kg/m
e
mm
h
mm
b
mm
Dimensions
a
mm
e
mm
HE 100 AA
HE 100 A
DIL 100
HE 100 B
HE 100 M
12,2
16,7
19,8
20,4
41,8
91
96
100
100
120
100
100
100
100
106
4,2
5,0
5,0
6,0
12,0
5,5
8,0
10,0
10,0
20,0
HE 340 AA
HE 340 A
DIL 340
HE 340 B
HE 340 M
78,9
105
128
134
238
320
330
340
340
377
300
300
300
300
309
8,5
9,5
9,5
12
21
11,5
16,5
21,5
21,5
40
HE 120 AA
HE 120 A
DIL 120
HE 120 B
HE 120 M
14,6
19,9
25,5
26,7
52,1
109
114
120
120
140
120
120
120
120
126
4,2
5,0
5,0
6,5
12,5
5,5
8,0
11,0
11,0
21,0
HE 360 AA
HE 360 A
DIL 360
HE 360 B
HE 360 M
83,7
112
136
142
250
339
350
360
360
395
300
300
300
300
309
9
10
10
12,5
21
12
17,5
22,5
22,5
40
HE 140 AA
HE 140 A
DIL 140
HE 140 B
HE 140 M
18,1
24,7
31,9
33,7
63,2
128
133
140
140
160
140
140
140
140
146
4,3
5,5
5,0
7,0
16,0
6,0
8,5
12,0
12,0
22,0
HE 400 AA
HE 400 A
DIL 400
HE 400 B
HE 400 M
92,4
125
148
155
256
378
390
400
400
432
300
300
300
300
307
9,5
11
11
13,5
21
13
19
24
24
40
HE 160 AA
HE 160 A
DIL 160
HE 160 B
HE 160 M
23,8
30,4
39,4
42,6
76,2
148
152
160
160
180
160
160
160
160
166
4,5
6,0
5,0
8,0
14,0
7,0
9,0
13,0
13,0
23,0
HE 450 AA
HE 450 A
DIL 450
HE 450 B
HE 450 M
99,7
140
163
171
263
425
440
450
450
478
300
300
300
300
307
10
11,5
11,5
14
21
12,5
21
26
26
40
HE 180 AA
HE 180 A
DIL 180
HE 180 B
HE 180 M
28,7
35,5
47,6
51,2
88,9
167
171
180
180
200
180
180
180
180
186
5,0
6,0
5,5
8,5
14,5
7,5
9,5
14,0
14,0
24,0
HE 500 AA
HE 500 A
DIL 500
HE 500 B
HE 500 M
107
155
179
187
270
472
490
500
500
524
300
300
300
300
306
10,5
12
12
14,5
21
14
23
28
28
40
HE 200 AA
HE 200 A
DIL 200
HE 200 B
HE 200 M
34,6
42,3
57,3
61,3
103,0
186
190
200
200
220
200
200
200
200
206
5,5
6,5
6,0
9,0
15,0
8,0
10,0
15,0
15,0
25,0
HE 550 AA
HE 550 A
DIL 550
HE 500 B
HE 500 M
120
166
190
199
278
522
540
550
550
572
300
300
300
300
306
11,5
12,5
12,5
15
21
15
24
29
29
40
HE 220 AA
HE 220 A
DIL 220
HE 220 B
HE 220 M
40,0
50,5
67,0
71,5
117,0
205
210
220
220
240
220
220
220
220
226
6,0
7,0
6,5
9,5
15,5
8,5
11,0
16,0
16,0
26,0
HE 600 AA
HE 600 A
DIL 600
HE 600 B
HE 600 M
129
178
201
212
285
571
590
600
600
620
300
300
300
300
305
12
13
13
15,5
21
15,5
25
30
30
40
HE 240 AA
HE 240 A
DIL 240
HE 240 B
HE 240 M
47,4
60,3
78,3
83,2
157,0
224
230
240
240
270
240
240
240
240
248
6,5
7,5
7,0
10,0
18,0
9,0
12,0
17,0
17,0
32,0
HE 650 AA
HE 650 A
DIL 650 B
HE 650 M
138
190
225
293
62
640
650
668
0300
300
300
305
12,5
13,5
16
21
16
26
31
40
HE 260 AA
HE 260 A
DIL 260
HE 260 B
HE 260 M
54,1
68,2
88,6
93,0
172,0
244
250
260
260
290
260
260
260
260
268
6,5
7,5
7,5
10,0
18,0
9,5
12,5
17,5
17,5
32,5
HE 700 AA
HE 700 A
DIL 700 B
HE 700 M
150
204
241
301
670
690
700
716
300
300
300
304
13
14,5
17
21
17
27
32
40
HE 280 AA
HE 280 A
DIL 280
HE 280 B
HE 280 M
61,2
76,4
98,3
103
189
264
270
280
280
310
280
280
280
280
288
7
8
8
10,5
18,5
10
13
18
18
33
HE 800 AA
HE 800 A
DIL 800 B
HE 800 M
172
224
262
317
770
790
800
814
300
300
300
303
14
15
17,5
21
18
28
33
40
HE 300 AA
HE 300 A
DIL 300
HE 300 B
HE 300 C
HE 300 M
69,8
88,3
112
117
177
238
283
290
300
300
320
340
300
300
300
300
305
310
7,5
8,5
8,5
11
16
21
10,5
14
19
19
29
39
HE 900 AA
HE 900 A
DIL 900 B
HE 900 M
198
252
291
333
870
890
900
910
300
300
300
302
15
16
18,5
21
20
30
35
40
HE 1000 AA
HE 1000 A
DIL 1000 B
HE 1000 M
222
990
314
349
970
300
1000
1008
300
16,5
300
302
16
31
19
21
21
HE 320 AA
HE 320 A
DIL 320
HE 320 B
HE 320 M
74,2
97,6
121
127
245
301
310
320
32
359
300
300
300
0300
309
8
9
9
11,5
21
11
15,5
20,5
20,5
40
36
40
103
Section
30.11.2007
10:28 Uhr
Seite 104
Section
Dimensions
Section
kg/m
kg/m
h
mm
6,00
80,0
b
mm
a
mm
e
mm
46
3,8
5,2
IPE
80
IPE
100
8,10
100,0
55
4,1
5,7
IPE A
IPE
120
120
8,66
10,40
117,6
120,0
64
64
3,8
4,4
5,1
6,3
IPE A
IPE
IPE R
140
140
140
10,50
12,90
14,40
137,4
140,0
142,0
73
73
72
3,8
4,7
5,3
5,6
6,9
7,8
IPE A
IPE
IPE R
160
160
160
12,70
15,80
17,70
157,0
160,0
162,0
82
82
81
4,0
5,0
5,6
5,9
7,4
8,5
IPE A
IPE
IPE O
IPE R
180
180
180
180
15,40
18,80
21,30
22,10
177,0
180,0
182,0
183,0
91
91
95
89
4,3
5,3
6,0
6,4
6,5
8,0
9,0
9,5
IPE A
IPE
IPE O
IPE R
200
200
200
200
18,40
22,40
25,10
26,60
197,0
200,0
202,0
204,0
100
100
105
97
4,5
5,6
6,2
6,6
7,0
8,5
9,5
10,5
IPE A
IPE
IPE O
IPE R
220
220
220
220
22,20
26,20
29,40
31,60
217,0
220,0
222,0
25,0
110
110
112
108
5
5,9
6,6
6,7
7,7
9,2
10,2
11,8
IPE A
IPE
IPE O
IPE R
240
240
240
240
26,20
30,70
34,30
37,30
237,0
240,0
242,0
245,0
120
120
122
118
5,2
6,2
7,0
7,5
8,3
9,8
10,8
12,3
IPE A
IPE
IPE O
IPE R
270
270
270
270
30,70
36,10
42,30
44,00
267,0
270,0
274,0
276,0
135
135
136
133
5,5
6,6
7,5
7,7
8,7
10,2
12,2
13,1
IPE A
IPE
IPE O
IPE R
300
300
300
300
36,50
42,20
49,30
51,70
297,0
300,0
304,0
306,0
150
150
152
147
6,1
7,1
8,0
8,5
9,2
10,7
12,7
13,7
b
mm
Dimensions
a
mm
e
mm
h
mm
Dimensions
b
a
mm
mm
e
m
IPE A
IPE
IPE O
IPE R
330
330
330
330
43,00
49,10
57,00
60,30
327,0
330,0
334,0
336,0
160
160
162
158
6,5
7,5
8,5
9,2
10,0
11,5
13,5
14,5
IPE A
IPE
IPE O
IPE R
360
360
360
360
50,2
57,1
66,0
70,3
357,6
360
364
366
170
170
172
167
6,6
8,0
9,2
9,9
11,5
12,7
14,7
16,0
IPE A
IPE
IPE O
IPE R
IPE V
400
400
400
400
400
57,4
66,3
75,7
81,5
84,0
397
400
404
407
408
180
187
182
178
182
7,0
8,6
9,7
10,6
10,6
12,0
13,5
15,5
17,0
17,5
IPE A
IPE
IPE O
IPE R
IPE V
450
450
450
450
450
67,2
77,6
92,4
95,2
104,0
447
450
456
458
460
190
190
192
188
194
7,6
9,4
11,0
11,3
12,4
13,1
14,6
17,6
18,6
19,6
IPE A
IPE
IPE O
IPE R
IPE V
500
500
500
500
500
79,4
90,7
107,0
111,0
129,0
497
500
506
508
514
200
200
202
197
204
8,4
10,2
12,0
12,6
14,2
14,5
16,0
19,0
20,0
23,0
IPE A
IPE
IPE O
IPE R
IPE V
550
550
550
550
550
92,1
106,0
123,0
134,0
129,0
547
550
556
560
514
210
210
212
210
204
9,0
11,1
12,7
14,0
14,2
15,7
17,2
20,2
22,2
23,0
IPE A
IPE
IPE O
IPE R
IPE V
600
600
600
600
600
108,0
122,0
144,0
154,0
184,0
597
600
608
610
618
220
220
218
224
228
9,8
12,0
14,0
15,0
18,0
17,5
19,0
23,0
24,0
28,0
137,0
147,0
161,0
173,0
185,0
196,0
210,0
222,0
753
753
758
762
766
770
775
778
563
265
266
267
267
268
268
269
11,5
13,2
13,8
14,4
14,9
15,6
16,0
17,0
17,0
17,0
19,3
21,6
23,6
25,4
28,0
29,5
Section
kg/m
h
mm
Section
IPN
IPN
160
180
17,9
21,9
160
180
74
82
6,3
6,9
9,5
10,4
IPN
IPN
IPN
IPN
IPN
200
220
240
260
280
26,2
31,1
36,2
41,9
47,9
200
220
240
260
280
90
97
106
113
119
7,5
8,1
8,7
9,4
10,1
11,3
12,2
13,1
14,1
15,2
104
kg/m
h
mm
Dimensions
b
a
mm
mm
e
mm
IPN
IPN
IPN
IPN
IPN
300
320
340
360
380
54,2
61,0
68,0
76,1
84,0
300
320
340
360
380
125
131
137
143
149
10,8
11,5
12,2
13,0
13,7
16,2
17,3
18,3
19,5
20,5
IPN
IPN
400
450
92,4
115,0
400
450
155
170
14,4
16,2
21,6
24,3
IPN
IPN
500
550
141,0
166,0
500
550
185
200
18,0
19,0
27,0
30,0
30.11.2007
10:28 Uhr
Seite 105
t
x2
x 2,5
x3
x4
x2
x 2,5
x3
x4
x 4,5
x5
x6
x2
x 2,5
x3
x4
x5
x6
x 2,5
x3
x 3,5
x4
x 4,5
x5
x6
x 2,5
x3
x4
x5
x6
x3
x 3,5
x4
x5
x6
x7
x8
x3
x4
x 4,5
x5
x6
x7
x8
x3
x4
x 4,5
x5
x6
x7
x8
x9
x 10
x4
x5
x 5,5
x6
x8
x 10
x4
x5
x6
x7
x8
x 10
x5
x6
x7
x8
x9
x 10
x 11
kg/m
0,60
0,74
0,88
1,14
0,76
0,94
1,12
1,45
1,62
1,77
2,08
0,93
1,15
1,37
1,78
2,18
2,57
1,34
1,60
1,87
2,10
2,33
2,57
3,04
1,49
1,75
2,28
2,82
3,33
1,84
2,15
2,42
2,97
3,52
4,04
4,55
2,09
2,74
3,06
3,38
4,00
4,52
5,19
2,36
3,07
3,41
3,77
4,47
5,15
582
6,47
7,06
3,37
4,18
4,57
4,95
6,46
7,90
3,70
4,57
5,42
6,25
7,09
8,69
4,95
5,91
6,83
7,72
8,62
9,49
10,34
Size Thickness
A
t
70 x 70
x5
70 x 70
x6
70 x 70
x7
70 x 70
x9
70 x 70
x 11
75 x 75
x5
75 x 75
x6
75 x 75
x7
75 x 75
x8
75 x 75
x 10
75 x 75
x 12
80 x 80
x6
80 x 80
x8
80 x 80
x9
80 x 80
x 10
80 x 80
x 12
80 x 80
x 14
90 x 90
x6
90 x 90
x8
90 x 90
x9
90 x 90
x 10
90 x 90
x 11
90 x 90
x 12
90 x 90
x 13
90 x 90
x 16
100 x 100 x 6
100 x 100 x 8
100 x 100 x 10
100 x 100 x 12
100 x 100 x 14
100 x 100 x 15
100 x 100 x 16
110 x 110 x 8
110 x 110 x 10
110 x 110 x 12
110 x 110 x 14
110 x 110 x 16
120 x 120 x 8
120 x 120 x 10
120 x 120 x 11
120 x 120 x 12
120 x 120 x 13
120 x 120 x 15
120 x 120 x 18
130 x 130 x 8
130 x 130 x 10
130 x 130 x 12
130 x 130 x 14
130 x 130 x 16
130 x 130 x 19
140 x 140 x 13
140 x 140 x 15
140 x 140 x 16
140 x 140 x 17
140 x 140 x 19
140 x 140 x 20
150 x 150 x 10
150 x 150 x 12
150 x 150 x 14
150 x 150 x 15
150 x 150 x 16
150 x 150 x 18
150 x 150 x 20
160 x 160 x 15
160 x 160 x 17
160 x 160 x 19
180 x 180 x 15
180 x 180 x 16
180 x 180 x 18
180 x 180 x 20
kg/m
5,37
6,38
7,38
9,37
11,23
5,76
6,86
7,94
9,03
11,07
13,10
7,30
9,66
10,80
11,90
14,05
16,10
8,25
10,90
12,17
13,45
14,68
15,93
17,11
20,76
9,30
12,18
15,07
17,82
20,57
21,90
23,30
13,40
16,60
19,70
22,80
25,80
14,70
18,20
20,81
21,60
23,30
26,60
31,60
15,90
19,70
23,60
27,20
30,90
36,20
27,50
31,40
33,40
35,30
39,10
41,00
23,00
27,30
31,60
33,80
35,90
40,10
44,60
36,20
40,70
45,10
40,90
43,50
48,60
53,70
Size Thickness
A
t
200 x 200
x 15
200 x 200
x 16
200 x 200
x 18
200 x 200
x 20
200 x 200
x 22
kg/m
45,60
48,50
54,20
59,90
65,60
Size Thickness
A
t
250 x 250
x 25
250 x 250
x 28
250 x 250
x 32
250 x 250
x 35
kg/m
93,60
104,00
118,00
128,00
Size Thickness
A
t
100 x 50
x6
100 x 50
x8
100 x 50
x 10
100 x 50
x 12
100 x 65
x 6,5
100 x 65
x7
100 x 65
x8
100 x 65
x9
100 x 65
x 10
100 x 65
x 11
100 x 75
x 6,5
100 x 75
x7
100 x 75
x8
100 x 75
x9
100 x 75
x 10
100 x 75
x 11
100 x 75
x 12
120 x 80
x8
120 x 80
x 10
120 x 80
x 12
120 x 80
x 14
125 x 75
x 6,5
125 x 75
x8
125 x 75
x 10
125 x 75
x 12
130 x 65
x8
130 x 65
x 10
130 x 65
x 12
137 x 105
x 6,4
137 x 105
x 7,9
137 x 105
x 9,5
150 x 75
x9
150 x 75
x 10
150 x 75
x 11
150 x 75
x 12
150 x 75
x 13
150 x 75
x 15
150 x 90
x9
150 x 90
x 10
150 x 90
x 12
150 x 90
x 15
150 x 90
x 18
150 x 100
x 10
150 x 100
x 12
150 x 100
x 14
150 x 100
x 15
160 x 80
x 10
160 x 80
x 12
160 x 80
x 14
200 x 100
x 10
200 x 100
x 12
200 x 100
x 14
200 x 100
x 15
200 x 100
x 16
200 x 150
x 12
200 x 150
x 15
200 x 150
x 18
kg/m
6,85
8,99
11,10
13,10
8,17
8,77
9,94
11,10
12,30
13,40
8,17
9,30
10,60
11,80
13,00
14,30
15,40
12,20
15,00
17,80
20,50
9,98
12,20
15,00
17,80
11,80
14,60
17,30
11,70
14,50
17,30
15,30
17,00
18,60
20,20
21,70
24,80
16,70
18,20
21,60
26,60
31,70
19,00
22,60
26,10
27,80
18,20
21,60
25,00
23,00
27,30
31,60
33,70
35,90
32,00
39,60
47,10
Unequal Angles
Size Thickness
A
t
30 x 20
x3
30 x 20
x4
30 x 20
x5
40 x 20
x3
40 x 20
x4
40 x 20
x5
40 x 20
x6
45 x 30
x3
45 x 30
x4
45 x 30
x5
50 x 40
x3
50 x 40
x4
50 x 40
x5
50 x 40
x6
60 x 30
x3
60 x 30
x5
60 x 30
x6
60 x 30
x7
60 x 40
x3
60 x 40
x4
60 x 40
x5
60 x 40
x6
60 x 40
x7
65 x 50
x5
65 x 50
x6
65 x 50
x7
65 x 50
x8
65 x 50
x9
75 x 50
x5
75 x 50
x6
75 x 50
x 6,5
75 x 50
x7
75 x 50
x8
75 x 50
x9
75 x 50
x 10
75 x 55
x5
75 x 55
x7
75 x 55
x9
75 x 65
x6
75 x 65
x8
75 x 65
x 10
80 x 40
x6
80 x 40
x7
80 x 40
x8
80 x 60
x6
80 x 60
x7
80 x 60
x8
90 x 65
x6
90 x 65
x8
90 x 65
x 10
90 x 75
x 6,5
90 x 75
x7
90 x 75
x9
90 x 75
x 12,5
kg/m
1,12
1,46
1,77
1,35
1,77
2,17
2,56
1,71
2,25
2,77
2,06
2,72
3,35
3,98
2,06
3,37
3,98
4,59
2,33
3,05
3,76
4,46
5,14
4,35
5,16
5,96
6,76
7,52
4,74
5,64
6,10
6,54
7,40
8,24
8,97
4,85
6,80
8,59
6,37
8,34
10,30
5,40
6,20
7,08
6,37
7,36
8,34
7,09
9,30
11,45
8,14
8,74
11,10
15,25
Size Thickness
A
20 x 20
20 x 20
20 x 20
20 x 20
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
25 x 25
30 x 30
30 x 30
30 x 30
30 x 30
30 x 30
30 x 30
35 x 35
35 x 35
35 x 35
35 x 35
35 x 35
35 x 35
35 x 35
38 x 38
38 x 38
38 x 38
38 x 38
38 x 38
40 x 40
40 x 40
40 x 40
40 x 40
40 x 40
40 x 40
40 x 40
45 x 45
45 x 45
45 x 45
45 x 45
45 x 45
45 x 45
45 x 45
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
50 x 50
55 x 55
55 x 55
55 x 55
55 x 55
55 x 55
55 x 55
60 x 60
60 x 60
60 x 60
60 x 60
60 x 60
60 x 60
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
65 x 65
30.11.2007
10:28 Uhr
Seite 106
Imperial
designation
h x b x weight
(nominal)
Dimensions
b
mm
a
e
mm mm
mm
M 100 x 100
x 19,3
x 20,5
x 24,2
M4x4
x 13
x 13,8
x 16,3
102
102
107
100
102
100
6,5
8,0
7,9
9,4
9,4
12
W 130 x 130
x 23,8
x 28,1
W5x5
x 16
x 19
127
131
127
128
6,1
6,9
9,1
10,9
W 150 x 150
x 22,5
x 29,8
x 37,1
W6x6
x 15
x 20
x 25
152
157
162
152
153
154
5,8
6,6
8,1
6,6
9,3
11,6
W 200 x 135
x 26,6
x 31,3
W 8 x 5,25 x 18
x 21
207
210
133
134
5,8
6,4
8,4
10,2
W 200 x 165
x 35,9
x 41,7
W 8 x 6,5
x 24
x 28
201
205
165
166
6,2
7,2
10,2
11,8
W 200 x 200
x 46,1
x 52
x 59
x 71
x 86
x 100
W8x8
x 31
x 35
x 40
x 48
x 58
x 67
203
206
210
216
222
229
203
204
205
206
209
210
7,2
7,9
9,1
10,2
13
14,5
11
12,6
14,2
17,4
20,6
23,7
W 250 x 145
x 32,7
x 38,5
x 44,8
W 10 x 5,75x 22
x 26
x 30
258
262
266
146
147
148
6,1
6,6
7,6
9,1
11,2
13
W 250 x 200
x 49,1
x 58
x 67
W 10 x 8
247
252
257
202
203
204
7,4
8
8,9
11
13,5
15,7
W 250 X 250
x 73
x 80
x 89
x 101
x 115
x 131
x 149
x 167
W 10 x 10 x 49
x 54
x 60
x 68
x 77
x 88
x 100
x 112
253
256
260
264
269
275
282
289
254
255
256
257
259
261
263
265
8,6
9,4
10,7
11,9
13,5
15,4
17,3
19,2
14,2
15,6
17,3
9,6
22,1
25,1
28,4
31,8
x 38,7
x 44,5
x 52
W 12 x 6,5 x 26
x 30
x 35
310
313
317
165
5,8
166
6,6
167 736
9,7
11,2
13,2
W 310 x 250
x 79
x 86
W 12 x 10 x 53
x 58
306
310
254
254
14,6
16,3
W 310 x 310
x 97
x 107
x 117
x 129
x 143
x 158
x 179
x 202
x 226
x 253
x 283
x 313
x 342
x 375
x 415
x 454
x 500
W 12 x 12 x 65
x 72
x 79
x 87
x 96
x 106
x 120
x 136
x 152
x 170
x 190
x 210
x 230
x 252
x 279
x 305
x 336
308
311
314
318
353
327
333
341
348
356
365
374
382
391
403
415
427
305
306
307
308
309
310
313
315
317
319
322
325
328
330
334
336
340
W 360 x 170
x 44,8
x 51
x 57
W 14 x 6,75x 30
x 34
x 38
352
355
358
171
171
172
6,9
7,2
7,9
9,8
11,6
13,1
W 360 x 250
x 91
x 101
x 110
x 122
W 14 x 10 x 61
x 65
x 74
x 82
353
357
360
363
254
255
256
257
9,5
10,5
11,4
13,0
16,4
18,3
19,9
21,7
W 310 x 165
106
x 33
x 39
x 45
8,8
9,1
8,9 15,4
10,9 17,0
1,9 18,7
13,1 20,6
14,0 22,9
15,5 25,1
18,0 28,1
20,1
31,7
22,1 35,6
24,4 39,6
26,9 44,1
30,0 48,3
32,6 52,6
35,4 57,2
38,9 62,7
41,3 68,7
45,1 751
Metric
designation
h x b x mass
(nominal)
Imperial
designation
h x b x weighth
(nominal)
b
mm
Dimensions
a
mm
e
mm
mm
W 360 x 370
x 134
x 147
x 162
x 179
x 196
W 14 x 14,5 x 90
x 99
x 109
x 120
x 132
356
360
364
368
372
369
370
371
373
374
11,2
12,3
13,3
15,0
16,4
18,0
19,8
21,8
23,9
26,2
W 360 x 410
x 216
x 237
x 262
x 287
x 314
x 347
x 382
x 421
x 463
x 509
x 551
x 592
x 634
x 677
x 744
x 818
x 901
x 990
x 1086
W 14 x 16
x 145
x 159
x 176
x 193
x 211
x 233
x 257
x 283
x 311
x 342
x 370
x 398
x 426
x 455
x 500
x 550
x 605
x 665
x 730
375
380
387
393
399
407
416
425
435
446
455
465
474
483
498
514
531
550
569
394
395
398
399
401
404
406
409
412
416
418
421
424
428
432
437
442
448
454
17,3 27,7
18,9 30,2
21,1 33,3
22,3 36,6
24,9 39,6
27,2 43,7
29,8 48,0
32,8 52,6
35,8 57,4
39,1 62,7
42,0 67,6
45,0 72,3
47,6 77,1
51,2 81,5
55,6 88,9
60,5 97,0
65,9 106,0
71,9 115,0
78,0 125,0
W 410 x 180
x 53
x 60
x 67
x 75
x 85
W 16 x 7
x 36
x 40
x 45
x 50
x 57
403
407
410
413
417
177
178
179
180
181
7,5
7,7
8,8
9,7
10,9
10,9
12,8
14,4
16,0
18,2
W 410 x 260
x 100
x 114
x 132
x 149
W 16 x 10,25x 67
x 77
x 89
x 100
415
420
425
431
260
261
263
265
10,0
11,6
13,3
14,9
16,9
19,3
22,2
25,0
W 460 x 190
x 74
x 82
x 89
x 97
x 106
W 18 x 7,5
x 50
x 55
x 60
x 65
x 71
457
460
463
466
469
190
191
192
193
194
9,0
9,9
10,5
11,4
12,6
14,5
16,0
17,7
19,0
20,6
W 460 x 280
x 113
x 128
x 144
x 158
x 177
W 18 x 11
x 76
x 86
x 97
x 106
x 119
463
467
472
476
482
280
282
283
284
286
10,8
12,2
13,6
15,0
16,6
17,3
19,6
22,1
23,9
26,9
W 530 x 165
x 66
x 74
x 85
W 21 x 6,5
x 44
x 50
x 57
525
529
535
165
166
166
8,9
9,7
10,3
11,4
13,6
16,5
W 530 x 210
x 92
x 101
x 109
x 123
x 138
W 21 x 8,25 x 62
x 68
x 73
x 83
x 93
533
537
539
544
549
209
210
211
515
215
10,2
10,9
11,6
13,1
14,7
15,6
17,4
18,8
21,2
23,6
W 530 x 315
x 150
x 165
x 182
x 196
x 219
W 21 x 12,25x 101
x 111
x 122
x 132
x 147
543
546
551
554
560
312
313
315
316
318
12,7 20,3
14,0 222
12,5 24,4
16,5 26,3
18,3 29,2
W 610 x 180
x 82
x 92
W24 x 7
x 55
x 62
599
603
178
179
10,0
10,9
12,8
15,0
W 610 x 230
x 101
x 113
x 125
x 140
W 24 x 7
x 68
x 76
x 84
x 94
603
608
612
617
228
228
229
230
10,5
11,2
11,9
13,1
14,9
17,3
19,6
22,2
30.11.2007
10:28 Uhr
Seite 107
Imperial
designation
h x b x weight
(nominal)
b
mm
Dimensions
a
e
mm mm
W 24 x 12,75 x 104
x 117
x 131
x 146
x 162
611
616
622
628
635
324
325
327
328
329
12,7
14,0
15,4
16,5
17,9
19,0
21,6
24,4
27,7
31,0
W 27 x 10
x 84
x 94
x 102
x 114
678
684
688
693
253
254
254
256
11,7
12,4
13,1
14,5
16,3
18,9
21,1
23,6
W 27 x 14
x 146
x 161
x 178
695
701
706
3551534 24,8
356 16,8 27,4
358 18,4 30,2
W 30 x 10,5
x 99
x 108
x 116
x 124
x 132
725
758
762
766
770
265
266
267
267
268
W 30 x 15
x 173
x 191
x 211
773
779
786
W 33 x 11,5
x 118
x 130
x 141
x 152
835
840
846
851
292
292
293
294
W 33 x 15,75 x 201
x 221
x 241
855
862
868
13,2
13,8
14,4
14,9
15,6
14,0
14,7
15,4
16,1
mm
17,0
19,3
21,6
23,6
25,4
18,8
21,7
24,4
26,8
Metric
designation
h x b x mass
(nominal)
Imperial
designation
h x b x weight
(nominal)
Dimensions
mm
b
a
mm mm
W 36 x 12 x 135
x 150
x 160
x 170
x 182
x 194
x 210
903
911
915
919
923
927
932
304
304
305
306
307
308
309
15,2
15,9
16,5
17,3
18,4
19,4
21,1
20,1
23,9
25,9
27,9
30,0
32,0
34,5
W 25 x 16,5x 230
x 245
x 260
x 280
x 300
912
916
921
927
933
418
419
420
422
423
19,3
20,3
21,3
22,5
24,0
32,0
34,3
36,6
39,9
42,7
W 40 x 12 x 149
x 167
x 783
x 211
x 235
970
980
990
1000
1008
300
300
300
300
302
16,0 21,0
16,5 26,0
16,5 31,0
19,0 36,0
21,0 40,0
W 40 x 16 x 174
x 199
x 215
x 249
x 277
970
982
990
1000
1008
400
400
400
400
402
16,5 21,0
16,5 27,0
16,4 31,0
19,0 36,0
21,0 40,0
W 40 x 18 x 192
x 221
x 244
x 268
x 298
x 328
970
982
992
1000
1008
1016
450
450
450
451
453
455
18,0
18,0
18,0
19,0
21,0
23,0
e
mm
21,0
27,0
32,0
36,0
40,0
44,0
U
U
U
U
U
U
U
U
Section
Dimensions
30 x 15
40 x 20
40 x 35
40 x 25
50 x 38
60 x 30
65 x 42
70 x 40
kg/m
h
mm
b
mm
a
mm
e
mm
1,74
2,87
4,87
3,86
5,59
5,07
7,09
6,77
30
40
40
50
50
60
65
70
15
20
35
25
38
30
42
40
4,0
5,0
5,0
5,0
5,0
6,0
5,5
6,0
4,5
5,5
7,0
6,0
7,0
6,0
7,5
6,5
Dimensions
kg/m
h
mm
b
mm
a
mm
e
mm
UPN
UPN
UPN
UPN
UPN
UPN
80
100
120
140
160
180
8,64
10,60
13,40
16,00
18,80
22,00
80
100
120
140
60
180
50
55
60
65
70
6,0
7,0
7,0
7,5
8,0
8,5
9,0
10,0
10,5
11,0
UPN
UPN
UPN
UPN
UPN
200
220
240
260
280
25,30
29,40
33,20
37,90
41,80
200
220
240
260
280
75
80
85
90
95
8,5
9,0
9,2
10,0
10,0
11,5
12,5
13,0
14,0
15,0
UPN
UPN
UPN
UPN
300
320
350
380
46,20
59,50
60,60
63,10
300
320
350
380
100
100
100
102
10,0
14,0
14,0
13,5
16,0
17,5
16,0
16,0
UPN
400
71,80
400
110
14,0
18,0
107
Metric
designation
h x b x mass
(nominal)
30.11.2007
10:28 Uhr
Seite 108
Metric
designation
h x b x mass
(nominal)
Imperial
designation
h x b x weight
(nominal)
Dimensions
h
mm
b
mm
a
mm
e
mm
C 150 x 51
x 12,2
x 15,6
x 19,3
C6x2
x 8,20
152,4
x 10,50
x 13,00
48,8
152,4
152,4
5,1
51,7
54,8
8,7
8,0 8,7
11,1 8,7
C 180 x 54
x 14,6
C 7 x 2 1/8
x 18,2
x 22,0
x 9,80
177,8
x 12,25
x 14,75
53,1
177,8
1778
5,3
55,7
58,4
9,3
8,0 9,3
10,6 9,3
C 200 x 57
x 17,1
C 8 x 2 1/4
x 20,5
x 27,9
x 11,50
203,2
x 13,75
x 18,75
57,4
203,2
203,2
5,6
59,5
64,3
9,9
7,7 9,9
12,4 9,9
C 230 x 64
x 19,9
C 9 x 2 1/2
x 22,0
x 30,0
x 13,40
228,6
x 15,00
x 20,00
61,7
228,6
228,6
5,8
63,1
67,3
10,5
7,2 10,5
11,4 10,5
C 250 x 67
x 22,8
C 10 x 2 5/8
x 30,0
x 37,0
x 45,0
x 15,80
254,0
x 20,00
x 25,00
x 30,00
66,0
254,0
254,0
254,0
6,1
69,5
73,3
77,0
11,1
9,6 11,1
13,4 11,1
17,1 11,1
C 310 x 76
x 30,8
C 12 x 3
x 37,0
x 45,0
x 20,70
304,8
x 25,00
x 30,00
74,4
304,8
304,8
7,1
77,4
80,5
12,7
9,8 12,7
12,9 12,7
C 380 x 86
x 50,4
C 15x 3 3/8
x 60,0
x 74,0
x 33,90
381,0
x 40,00
x 50,00
86,4
381,0
381,0
10,2
89,4
94,4
16,5
13,2 16,5
18,2 16,5
Channels
To BS 4: Part 1: 1980
Metric dimensions
Imperial dimensions
Serial Size
DxB
mm
kg
Mass
per metre
cm
Area
Thickness
of section Web
Flange
t mm
T mm
in
Serial Size
DxB
in
Mass
per metre
lb/ft
Area
of section
in
Thickness
Web
Flange
t in
T in
432
381
305
x 102
x 102
x 102
65,54
55,10
46,18
83,49
70,19
58,83
12,2
10,4
10,2
16,8
16,3
14,8
17 x 4
15 x 4
12 x 4
44
37
31
12,94
10,88
9,12
0,48
0,41
0,40
0,663
0,643
0,584
305
254
254
x 89
x 89
x 76
41,69
35,74
28,29
53,11
45,52
36,03
10,2
9,1
8,1
13,7
13,6
10,9
12 x 3 1/2 28
10 x 3 1/2 24
10 x 3
19
8,23
7,06
5,58
0,40
0,36
0,32
0,538
0,535
0,431
229
229
203
203
x 89
x 76
x 89
x 89
32,76
26,06
29,78
23,82
41,73
33,20
37,94
30,34
8,6
7,6
8,1
7,1
13,3
11,2
12,9
11,2
9 x 3 1/2
9x3
8 x 3 1/2
8x3
22
17,5
20
16
6,47
5,15
5,88
4,70
0,34
0,30
0,32
0,28
0,535
0,439
0,507
0,439
178
178
152
152
x 89
x 76
x 89
x 76
26,81
20,84
23,84
17,88
34,15
26,54
30,36
22,77
7,3
6,6
7,1
6,4
12,3
10,3
11,6
9,0
7 x 3 1/2
7x3
6 x 3 1/2
6x3
18
14
16
12
5,29
4,11
4,71
3,53
0,30
0,32
0,28
0,25
0,484
0,405
0,455
0,355
127
102
76
76
x 64
x 51
x 51
x 38
14,90
10,42
9,34
6,70
18,98
13,28
11,89
8,53
6,4
6,1
6,4
5,1
9,2
7,6
7,6
6,8
5 x 2 1/2
4x2
3x2
3 x 1 1/2
10
7
6,24
4,50
2,94
2,06
1,84
1,32
0,26
0,28
0,25
0,20
0,363
0,300
0,300
0,267
63,5
x 25,4
6,12
7,85
7,9
7,9
2 1/2 x 1
4,13
1,22
0,31
0,290
51
x 48
5,81
7,43
6,4
6,4
2 x 1 1/2
3,90
1,15
0,25
0,250
108
30.11.2007
10:28 Uhr
Seite 109
Size
in mm
Dia
Squares
Weight per
metre
kgs
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Rounds
Size
in mm
Dia
0.154
0.221
0.302
0.394
0.499
0.616
0.746
0.887
1.041
1.208
1.387
1.578
1.781
1.997
2.225
2.466
2.178
2.984
3.261
24
25
27
29
30
32
35
38
40
42
45
48
50
55
58
60
61
63
Weight per
metre
kgs
3.551
3.863
4.494
5.185
5.548
6.313
7.552
8.902
9.864
10.876
12.485
14.205
14.413
18.650
20.740
22.195
22.941
24.470
Size
in mm
Dia
65
67
70
75
80
85
90
95
100
105
115
120
125
130
135
140
150
Weight per
metre
kgs
Size
in mm
Dia
Weight per
metre
kgs
Size
in mm
Dia
Weight per
metre
kgs
0.196
0.282
0.502
0.785
1.038
1.130
1.650
1.766
2.009
2.404
3.140
3.974
4.906
6.376
7.065
9.616
11.335
12.560
45.0
50.0
55.0
60.0
65.0
70.0
75.0
80.0
85.0
90.0
95.0
100.0
105.0
110.0
120.0
130.0
140.0
150.0
15.896
19.625
23.746
28.260
33.160
38.465
44.156
50.240
56.716
63.585
70.846
78.500
86.546
94.985
113.040
132.670
153.860
176.630
5.0
6.0
8.0
10.0
11.5
12.0
14.5
15.0
16.0
17.5
20.0
22.5
25.0
28.5
30.0
35.0
38.0
40.0
26.049
27.676
30.210
34.680
39.458
44.545
49.940
55.642
61.654
67.973
81.537
88.781
96.334
104.19
112.36
120.84
138.72
serial size
mass
mm
mass
kg/m
mm
section section
Thickness
Area of
web
flange
Imperial dimensions
section
serial size
kg/m
mm
mm
mm
mm
cm
388
343
460.2
455.7
420.5
418.5
21.5
194.0
36.6
32.0
247.3
218.8
16 1/2 x 18
130
115
36 x 16 1/2
260
230
145
127
112
101
463.3
459.2
455.2
451.5
307.8
305.5
304.1
303.4
19.6
17.3
15.6
15.2
32.0
27.9
23.9
20.2
184.4
161.4
142.6
128.2
12 x 18
105
85
75
67.5
36 x 12
210
170
150
135
292 x 419
113.0
97
88
425.5
420.4
417.4
293.9
292.4
291.6
16.1
14.7
14.0
26.8
21.7
18.8
144.4
123.6
112.1
11 1/2 x161/2 76
65
59
33 x 11 1/2
152
130
118
267 x 381
99
87
74
762 x 267
197
176
147
384.8
381.0
376.9
268.0
266.7
265.3
15.6
14.3
12.9
25.4
21.6
17.5
125.4
110.2
94.2
10 1/2 x 15
66
58
49.5
30 x 10 1/2
132
116
99
254 x 343
85
76
70
63
346.5
343.8
241.8
339.0
255.8
254.5
253.7
253.0
14.5
13.2
12.4
11.7
23.7
21.0
19.0
16.2
108.3
96.9
89.3
79.8
10 x 13 1/2
57
51
47
42
27 x 10
114
102
94
84
305 x 205
119
90
75
316.5
608.7
304.8
211.5
307.0
304.8
18.6
14.1
11.9
31.5
23.6
19.7
151.9
114.0
95.1
12 x 12
80
60
50
24 x 12
160
120
100
229 x 305
70
63
57
51
308.5
305.9
303.7
301.1
230.1
229.0
228.2
227.6
13.1
11.9
11.2
10.6
22.1
19.6
17.3
14.8
89.2
79.8
72.2
64.6
9 x 12
47
42
38
34
24 x 9
61
84
76
68
178 x 305
46
41
610 x 178
91
82
301.3
299.1
178.4
177.8
10.6
10.1
15.0
12.8
57.8
52.4
7 x 12
30.5
27.5
24 x 7
61
55
210 x267
61
55
51
46
41
272.3
269.7
268.4
266.6
264.2
211.9
210.7
210.1
209.3
208.7
12.8
11.6
10.9
10.2
9.6
21.3
18.8
17.4
15.6
13.2
77.9
69.3
64.6
58.9
52.2
8 1/4 x 10 1/2 41
36.5
34
31
27.5
21 x 8 1/4
82
73
68
62
52
165 x 267
37
33
533 x 165
73
66
264.4
262.4
165.6
164.1
9.3
8.8
13.5
11.5
46.3
41.7
6 1/2 x 10 1/224.5
22
21 x 6 1/2
49
44
191 x 229
49
45
41
37
34
457 x 191
98
89
82
74
67
233.7
231.8
230.1
228.6
226.8
192.9
192.0
191.3
190.5
189.9
11.4
10.6
9.9
9.1
8.5
19.6
17.7
16.0
14.5
12.7
62.6
57.0
52.3
47.5
42.7
7 1/2 x 9
18 x 7 1/2
66
60
55
50
45
419 x 457
194
172
914 x 419
305 x 457
inch
From universal
beam
serial size
mass
lbs/ft
33
30
27.5
25
22.5
inch
lbs/ft
109
30.11.2007
10:28 Uhr
Seite 110
Reinforcing Bars
Plain & Deformed
Nominal Nominal
Diameter Weight
Nominal Nominal
Diameter Weight
D
mm
kg/m
D
mm
kg/m
6
8
0,22
0,40
10
12
14
16
18
19
20
0,62
0,89
1,21
1,58
2,00
2,23
2,47
22
24
25
26
28
2,98
3,55
3,85
4,17
4,83
30
32
36
40
5,55
6,31
7,99
9,87
Comparison Specifications
Country
Specification
Britain
BS 4449
Grade
Yield Strength
Tensile Strength
Elongation
Mild Steel
250 N/ mm
Actual Yield
Strees x 1,15
22
High Yield
460 N/ mm
Actual Yield
Stress x 1,15
12
40000 psi
70000 psi
No. 3,7
No.4,5,6
(300 MPa)
(28,12 kg f/ mm)
(500 MPa)
(49,2 kg f/ mm)
60000 psi
(400 MPa)
(42,18 kg f/ mm
90000 psi
(500 MPa)
(63,29 kg f/ mm)
No. 3,4,5,6
9
No. 7,8
8
No. 9,10,11,14,18,7
2200 KP/ cm
(220 N/ mm)
(22,45 kg f/ mm)
3400 KP/ cm
(340 N/ mm)
(34,69 kg f/ mm)
18
10
SD 24
24 kg f/ mm
235 N/ mm
39-53 kg f/ mm
382-520 N/ mm
< D22
> D25
13
22
SD 30
30 kg f/ mm
294 N/ mm
49-63 kg f/ mm
480-618 N/ mm
< D22
> D25
14
18
SD 35
35 kg f/ mm
343 N/ mm
50 kg f/ mm
490 N/ mm
< D22
> D25
18
20
SD 40
40 kg f/ mm
392 N/ mm
57 kg f/ mm
550 N/ mm
< D22
> D25
16
19
SD 50
50 kg f/ mm
490 N/ mm
63 kg f/ mm
618 N/ mm
< D22
> D25
12
14
FeE 22
FeE 24
FeE 40
FeE 50
215 N/ mm
235 N/ mm
400 N/ mm
500 N/ mm
330-490 N/ mm
410-490 N/ mm
480 N/ mm
550 N/ mm
Grade 40
U.S.A
ASTM
A 615
Grade 60
IR
BSt 22/ 34 RU
Germany
DIN 488
IIIU
BSt 42/ 52 RU
Japan
Jis
G3112
France
110
> 11
> 12
NFA
35015
35016
22
25
14
12
30.11.2007
10:28 Uhr
Seite 111
Weight
kg/m
20
25
30
35
40
45
50
55
60
65
70
2,5
3,6
5,0
7,0
9,0
11,5
14,5
17,0
20,5
24,0
28,0
DIA
mm
75
80
85
90
95
100
105
110
115
120
130
Weight
kg/m
DIA
mm
32,0
36,5
41,0
46,0
52,0
57,0
63,0
69,0
76,0
82,0
96,5
140
150
160
170
180
190
200
210
220
230
240
Weight
kg/m
112,0
128,0
146,0
165,0
184,0
206,0
228,0
251,0
276,0
301,0
328,0
DIA
mm
250
260
270
280
300
310
320
350
370
380
400
DIA
mm
Weight
kg/m
356,0
385,0
415,0
447,0
513,0
563,0
599,0
698,0
780,0
844,0
911,0
Weight
kg/m
3,5
5,0
6,0
15,5
23,0
19,0
16,6
31,0
27,0
37,0
34,8
32,0
49,0
43,0
36,5
Size
mm
OD x ID
Weight
kg/m
100 x70
110 x 60
110 x 70
110 x 80
120 x 50
120 x 60
120 x 70
120 x 80
130 x 60
130 x 80
130 x 90
130 x 100
140 x 70
140 x 70
140 x 100
29,0
48,0
41,0
32,5
68,0
62,0
55,0
46,0
76,0
60,0
51,0
39,0
84,0
66,0
55,0
Size
mm
OD x ID
150 x 70
150 x 80
150 x 90
150 x 105
160 x 80
160 x 90
160 x 100
160 x 110
160 x 120
170 x 80
170 x 100
170 x 130
180 x 90
180 x 130
180 x 140
Weight
kg/m
101,0
92,0
82,0
65,0
110,0
100,0
89,0
77,0
64,0
128,0
108,0
69,0
139,0
89,0
73,0
Size
mm
OD x ID
190 x 80
190 x 100
190 x 130
200 x 145
210 x 100
210 x 120
210 x 160
220 x 120
225 x 175
250 x 120
250 x 200
260 x 180
280 x 210
320 x 250
Weight
kg/m
174,0
150,0
110,0
109,0
195,0
170,0
106,0
195,0
115,0
275,0
128,0
206,0
195,0
243,0
Weight
kg/m
6,7
11,9
15,1
18,7
26,9
Size
mm
Weight
kg/m
70 x 70
80 x 80
85 x 85
90 x 90
36,6
47,8
54,0
60,5
Size
mm
100 x 100
110 x 110
120 x 120
130 x 130
Weight
kg/m
74,7
90,3
107,5
123,0
Size
mm
140 x 140
150 x 150
160 x 160
200 x 200
Weight
kg/m
142,0
163,0
186,0
290,0
111
30.11.2007
10:28 Uhr
Seite 112
Copper Pipe
ASTM Seamless Red Brass and Copper Pipe
Nominal Dimensions (inches) and weights
Size
(IPS)
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
Outside
Diameter
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.562
6.625
8.625
10.750
12.750
Regular
Inside
Diameter
Wall
Thickness
Brass
Copper
Inside
Diameter
.062
.082
.090
.107
.114
.126
.146
.150
.156
.187
.219
.250
.250
.250
.250
.312
.365
.375
.253
.447
.627
.934
1.27
1.78
2.63
3.13
4.12
5.99
8.56
11.2
12.7
15.8
19.0
30.9
45.2
55.3
.259
.457
.641
.955
1.30
1.82
2.69
3.20
4.22
6.12
8.76
11.4
12.9
16.2
19.4
31.6
46.2
65.5
.205
.294
.421
.542
.736
.951
1.272
1.494
1.933
2.315
2.892
3.358
3.818
4.812
5.751
7.625
9.750
...
.281
.376
.495
.626
.822
1.063
1.368
1.600
2.063
2.501
3.062
3.500
4.000
5.062
6.125
8.001
10.020
12.000
Extra Strong
Wall
Thickness
.100
.123
.127
.149
.157
.182
.194
.203
.221
.280
.304
.321
.341
.375
.437
.500
.500
..
Copper
.363
.611
.829
1.23
1.67
2.-16
3.39
1.10
5.67
8.66
11.6
1 2.1
16.9
23.2
32.2
48.4
61.1
...
.371
.625
.847
1.25
1.71
2.51
3.46
4.19
5.80
8.85
11.8
14.4
17.3
23.7
32.9
49.5
62.4
...
Above pipe suitable for use in plumbing lines, boiler feed lines, and
similar applications. Data in table abstracted from ASTM B 42 and B 43.
Copper Pipe
ASTM- Seamless Copper Water Tube
Dimensions and Weights
Standard
size
of tube
Inches
1/8
2/8
1/2
5/8
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
Nominal
outside
diameter
of tube
Inches
.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125
Type K Tube
Wall
Weight
thickness
per foot
Inches
Pounds
.035
.049
.049
.049
.065
.065
.065
.072
.083
.095
.109
.120
.134
.160
.192
.271
.338
.405
.145
.269
.344
.418
.641
.839
1.04
1.36
2.06
2.93
4.00
5.12
6.51
9.67
13.9
25.9
40.3
57.8
Type L Tube
Wall
Weight
thickness
per foot
Inches
Pounds
.030
.035
.040
.042
.045
.050
.055
.060
.070
.080
.090
.100
.110
.125
.140
.200
.250
.280
.126
.198
.285
.362
.455
.655
.884
1.14
1.75
2.48
3.33
4.29
5.38
7.61
10.2
19.3
30.1
40.4
Type M Tube
Wall
Weight
thickness
per foot
Inches
Pounds
.025
.025
.028
.030
.032
.035
.042
.049
.058
.065
.072
.083
.095
.109
.122
.170
.212
.254
.106
.145
.204
.263
.328
.465
.682
.940
1.46
2.03
2.68
3.58
4.66
6.66
8.92
16.5
25.6
36.7
Copper water tubes are designed for plumbing systems, underground water services, etc. The tubing is generally used
with solder, flared, or compression type fittings. Data in table (abstracted from ASTM B88) covers three wall thicknesses
designated Types K, L, and M. Types K and L are furnished in coils or straight lengths. Coiled lengths are annealed after
coiling. Straight lengths are furnished in the drawn temper unless annealing is specified. Type M is furnished in straight
lengths and in drawn temper only.
112
30.11.2007
10:28 Uhr
Seite 113
Copper Tube
10
10
10
10
11
12
12
12
12
13
13
14
14
15
15
15
15
16
16
16
16
18
18
18
20
20
20
20
20
22
22
22
22
23
23
24
24
25
25
25
25
26
26
26
28
28
28
28
30
30
KG/MTR
1
1.5
2
2.5
1
1
1.5
2
3
1.5
3
2
3
1
1.5
2
2.5
1.5
2
3
4
1
1.5
2
1
1.5
2
2.5
5
1
1.5
2
3
1.5
2
2
3
2
2.5
5
7.5
1.5
2
3
1
1.5
2
4
2
2.5
0.252
0.356
0.447
0.524
0.279
0.307
0.440
0.559
0.755
0.482
0.838
0.671
0.922
0.391
0.566
0.727
0.873
0.608
0.782
1.090
1.341
0.475
0.692
0.894
0.531
0.776
1.006
1.223
2.096
0.587
0.859
1.118
1.593
0.901
1.174
1.230
1.761
1.286
1.572
2.795
3.668
1.027
1.341
1.928
0.755
1.111
1.453
2.683
1.565
1.921
30
30
32
32
33
33
34
35
35
35
35
35
35
36
36
38
38
40
40
40
40
40
42
42
44
44.5
45
45
46
48
50
50
50
50
52
52
53
54
55
55
56
57
57
58
60
60
60
60
63
64
65
70
70
70
74
75
76
3
5
1
2
1.5
4
2
1
1.5
2
2.5
5
75
2
3
1.5
2
1.5
2.5
3
5
10
2
3
2
2
5
10
2
1.5
2
3
4
5
1
1.5
1.5
2
5
10
3
3
3.5
3
2.5
5
10
15
3
2
5
2.5
5
10
2
2.5
3
KG/MTR
2.264
3.493
0.866
1.677
1.320
3.242
1.789
0.950
1.404
1.844
2.271
4.192
5.764
1.900
2767
1.530
2.012
1.614
2.620
3.104
4.891
8.384
2.236
3.270
2.347
2.375
5.589
9781
2.459
1.949
2.683
3.940
5.142
6.288
1.425
2.117
2.159
2.906
6987
12.576
4.443
4.527
_ 5.233
4.611
4.017
7.685
13.973
18.864
5.030
3.465
8.384
4.716
9.082
16.768
4.024
5.065
6.120
80
80
80
84
85
86
89
89
90
90
95
100
100
100
100
102
104
105
108
108
108
110
120
120
130
131
132
133
133
135
140
150
150
156
158
159
159
160
160
170
170
180
180
191
200
200
206
210
220
256
264
267
300
2
5
10
2
2.5
3
2.5
3
5
10
2.5
2.5
5
10
20
1.5
2
2.5
2.5
3
4
5
5
10
5
3
3.5
3.5
4
5
10
5
10
3
5
3
6
5
10
5
10
5
10
4
5
10
3
5
10
3
5
3
5
KG/MTR
4.360
10.480
19.562
4.583
5.764
6.959
6.046
7.210
11.877
22.357
6.463
6.812
13.274
25.151
44.714
4.213
5.701
7.161
7.375
8.803
11.626
14.672
16.069
30.741
17.466
10.731
12.569
12.667
14.420
18.165
36.330
20.261
39.124
12.827
21.379
13.079
25.654
21.658
41.919
23.055
44.714
24.453
47.508
20.904
27.247
53.097
17.019
28.645
58.687
21.211
36.190
22.133
41.220
113
Nonferrous
30.11.2007
10:28 Uhr
Seite 114
a
4
4
5
5
6
8
8
8
8
10
10
10
10
10
12
12
12
12
12
15
16
17.5
18
20
20
20
20
20
22
26
28
30
35
40
60
Copper Plates
s
0.3
0.4
0.5
0.5
0.6
0.7
0.8
0.8
1
1
1.2
1.5
1.5
1.5
2
2
2
2.5
2.5
2.5
3
3
4
4
4.5
5
6
6
6
8
10
12
15
15
20
20
25
30
40
50
60
60
80
100
100
120
114
KG/sqm
4
4
5
5
4
5
6
8
8
5
6
8
10
10
6
6
8
10
12
10
14
17.5
18
10
12
12
14
20
12
17
14
10
10
30
35
0.5
1
0.5
1
1
1
1
1
1.5
1
1
1
1
2
1
1.5
1
2
1
1
2
3
1
1
1
1.5
2
1.5
2
3
3
1.5
3
4
2
0.062
0.107
0.080
0.142
0.142
0.196
0.214
0.249
0.347
0.231
0.249
0.285
0.320
0.570
0.285
0.401
0.320
0.641
0.392
0.409
0.926
0.000
0.605
0.498
0.534
0.774
1.068
O.9BB
1.068
4.278
5.480
0.988
2.083
4.414
3.240
600
1000
1000
1000
1000
1000
1000
1250
1000
1250
1000
1000
1250
1500
1000
1250
1500
1000
1250
1500
1000
1250
1000
1250
1000
1000
1000
1250
1500
1020
1020
1020
500
1020
1020
1040
1020
1020
1020
1020
970
1020
940
600
1020
600
2000
2000
1100
2000
2000
2000
2000
2500
2000
2500
2000
2000
2500
3000
2000
2500
3000
2000
2500
3000
2000
2500
2000
2500
2000
2000
2000
2500
3000
2020
2020
2020
Z000
3000
2020
2050
2020
2020
2020
3020
3120
2020
2390
2100
2020
2000
KG/sqm
2.670
3.560
4.450
4.450
5.340
6.230
7.120
7.120
8.900
8.900
10.680
13.350
13.350
13.350
17.800
17.800
17.800
22.250
22.250
22.250
26.700
26.700
35.600
35.600
40.050
44.500
53.400
53.400
53.400
71.200
89.000
106.800
133.500
133.500
178.000
178.000
222.500
267.000
356.000
445.000
534.000
534.00
712.000
890.000
890.000
1068.000
30.11.2007
10:28 Uhr
Seite 115
Copper Bars
KG/MTR
0.044
0.063
0.112
0.175
0.252
0.342
0.393
0.447
0.566
0.699
0.845
1.006
1.369
1.572
1.789
2.264
2.795
4.024
4.367
4.723
5.477
KG/MTR
29
30
33
35
36
40
45
50
60
65
70
80
90
100
110
116
120
127
130
150
160
170
180
200
300
318
410
500
5.876
6.288
7.608
8.558
9.055
11.178
14.148
17.466
25.151
29.518
34.234
44.714
56.591
69.865
84.537
94.010
100.606
112.685
118.072
157.196
178.923
201.987
226.363
279.460
628.785
706.503
1174.431
1746.625
Nonferrous
d
2.5
3
4
5
6
7
7.5
8
9
10
11
12
14
15
16
18
20
24
25
26
28
KG/MTR
5
6
8
10
12
14
15
18
20
22
25
30
35
40
50
60
80
90
100
5
6
8
10
12
14
15
18
20
22
25
30
35
40
50
60
80
90
100
0.223
0.320
0.570
0.890
1.282
1.744
2.003
2.884
3.560
4.308
5.563
8.010
10.903
14.240
22.250
32.040
56.960
72.090
89.000
Sw
14
15
19
36
KG/MTR
1.510
1.734
2.782
9.988
115
30.11.2007
10:28 Uhr
Seite 116
Brass Tubes
d
2
3
3.5
4
4
5
5
5
5
6
6
6
7
7
7
8
8
8
8
9
9
10
10
10
10
10
10
10
11
12
12
12
12
13
13
14
14
14
14
15
15
15
15
16
16
16
16
16.5
17
17
18
18
18
18
20
20
20
20
20
20
116
S
0.5
1
1
0.5
1
0.5
0.75
1
1.5
0.5
1
1.5
0.5
1
1.5
0.5
1
1.5
2
1
1.5
0.5
1
1.5
2
2.5
3
3.5
0.35
1
1.5
2
3
1
1.5
1
1.5
2
3
1
1.5
2
2.5
1
1.5
2
3
1.75
1
2.5
1
1.5
4
5
1
1.5
2
3
4
5
KG/MTR
0.020
0.053
0.066
0.046
0.079
0.059
0.084
0.106
0.138
0.073
0.132
0.178
0.086
0.158
0.218
0.099
0.185
0.257
0.317
0.211
0.297
0.125
0.237
0.336
0.422
0.495
0.554
0.600
0.098
0.290
0.415
0.528
0.712
0.317
0.455
0.343
0.495
0.633
0.870
0.369
0.534
0.686
0.824
0.396
0.574
0.739
1.029
0.681
0.422
0.956
0.448
0.653
1.477
1.714
0.501
0.732
0.950
1.345
1.688
1.978
d
20
22
22
22
22
23
24
24
25
25
25
25
25
26
28
28
28
30
30
30
30
30
30
31
31
31
32
32
32
33
33
33
34
34
34
34
35
35
36
37
38
39
39
39
40
40
40
40
40
40
42
42
43
43
43
43
44
44
44
45
S
6
1
3
4
5
1.5
2.5
3
1
1.5
2
2.5
5
2
1
1.5
2
1
1.5
2
2.5
3
5
2
2.5
5
1
2
3
1
1.5
2
2.5
3.5
5.5
7
1.5
7.5
1
3.5
1
3
4
4.5
1
1.5
2
2.5
3
5
1.5
2
1.5
2
3
3.5
1.5
2
3
1.5
KG/MTR
2.216
0.554
1.503
1.899
2.242
0.851
1.418
1.662
0.633
0.930
1.213
1.484
2.638
1.266
0.712
1.048
1.372
0.765
1.128
1.477
1.813
2.136
3.297
1.530
1.879
3.429
0.818
1.583
2.295
0.844
1.246
1.635
2.077
2.816
4.134
4.985
1.325
5.440
0.923
3.093
0.976
2.849
3.693
4.095
1.029
1.523
2.005
2.473
0.000
4.616
1.602
2.110
1.642
2.163
3.165
3.690
1.681
2.216
3.244
1.721
d
45
45
45
47
48
48
48
49
50
50
50
50
50
50
52
52
52
52
53
54
54
55
55
56
57
57
58
58
58
58
58
58
60
60
63
64
65
65
66
66
66
68
68
70
70
70
72
72
73
75
75
76
77
78
80
80
80
80
81
82
S
3
4.5
5
7
0.5
1.5
8
1.5
1.5
2
2.5
5
10
15
1
2
5
6.5
5
3
4
2.5
5
10
3
5
3.5
4
5
6
8
10
2.5
15
3
12
3
10
1.5
6
8
2.5
14
1.5
2.5
15
1.5
3.5
1.5
2.5
10
6
2
6
3.5
5
10
20
6.5
1.5
KG/MTR
3.323
4.807
5.275
7.385
0.626
1.840
8.440
1.879
1.919
2.532
3.132
5.935
10.550
13.847
1.345
2.638
6.198
7.801
6.330
4.036
5.275
3.462
6.594
12.133
4.275
6.858
5.031
5.697
6.990
8.229
10.550
12.660
3.792
17.804
4.748
16.459
4.906
14.860
2.552
9.495
12.238
4.319
19.940
2.710
4.451
21.760
2.789
6.324
2.829
4.781
17.144
11.078
3.956
11.394
7.062
9.891
18.463
31.651
12.773
3.185
30.11.2007
10:28 Uhr
Seite 117
Brass
Tubes, Sheets, Strip, Foil
d
84
84
85
85
85
87
90
90
90
92
95
95
96
97
100
100
100
100
100
100
101
104
105
105
106
108
110
110
112
116
125
126
130
130
140
155
155.6
156
160
180
185
200
200
210
S
2
8.5
2.5
6
7
9.5
4
5
10
5
3
8.5
9
10.5
2.5
4
5
10
15
20
12
14.5
2.35
5
6
4
4
5
12
6
2.5
3
5
7.5
10
7.5
7.95
3
10
20
5
5
10
5
KG/MTR
4.326
16.927
5.440
12.502
14.401
19.419
9.073
11.210
21.101
11.474
7.280
19.393
20.652
23.956
6.432
10.128
12.529
23.738
33.629
42.202
28.170
34.229
6.363
13.188
15.826
11.103
11.183
13.847
30.521
17.408
8.078
9.733
16.485
24.233
34.289
29.178
30.961
12.107
39.564
84.403
24.021
25.717
50.711
27.357
Brass Strip MS 63
s
0.05
0.1
0.1
0.1
0.2
0.2
0.3
0.4
0.4
0.4
0.5
0.5
a
100
43
65
300
30
152
50
38
50
140
15
18
KG/MTR
0.042
0.000
0.000
0.252
0.050
0.255
0.126
0.000
0.168
0.470
0.063
0.076
0.5
0.6
0.8
0.8
0.8
1
1
1
1
1
1
1
1.5
1.5
2
2
2
2.5
2.5
2.5
28
60
10
20
116
6
8
12
25
50
60
100
20
28
18
46
53
20
50
57
0.118
0.302
0.067
0.134
0.780
0.050
0.067
0.101
0.210
0.420
0.504
0.840
0.252
0.353
0.302
0.773
0.890
0.420
1.050
1.197
s
0.2
0.3
0.4
0.5
0.5
0.5
0.6
0.6
0.7
0.7
0.7
0.7
0.75
O.B
1
1
1
1.5
1.5
2
2
2
2.25
2.5
2.5
3
3
3
4
4
5
5
6
6
8
8
10
12
13
14
14
15
20
25
30
35
40
45
50
60
65
80
100
120
140
a
600
600
600
540
600
1000
600
1000
350
480
600
1000
1000
600
600
1000
1250
600
1000
600
1000
1250
600
600
1000
600
1000
1250
600
1000
600
1000
600
1000
600
1000
1000
1020
1180
600
1000
1020
1020
1020
1020
1020
1020
1020
1020
1020
1500
1020
600
600
600
s
0.01
0.02
0.03
0.04
0.05
0.06
0.08
a
300
300
300
300
300
300
300
b
2000
2000
2000
2000
2000
2000
2000
2000
1220
2000
2000
2000
2000
2000
2000
2000
2500
2000
2000
2000
2000
2500
2000
2000
2000
2000
2000
2500
2000
2000
2000
2000
2000
2000
2000
2000
2000
2020
2470
2000
2000
2020
2020
2020
2020
2020
2020
2020
2020
2020
3000
2020
2000
2000
2000
KG/sq m
1.680
2.520
3.360
4.200
4.200
4.200
5.040
5.040
5.880
5.880
5.880
5.880
6.300
6.720
8.400
8.400
8.400
12.600
12.600
16.800
16.800
16.800
18.900
21.000
21.000
25.200
25.200
25.200
33.600
33.600
42.000
42.000
50.400
50.400
67.200
67.200
84.000
100.800
109.200
117.600
117.600
126.000
168.000
210.000
252.000
294.000
336.000
378.000
420.000
504.000
546.000
672.000
840.000
1008.000
1176.000
Brass Foil
b
650
650
650
650
650
650
650
KG/MTR
0.084
0.168
0.252
0.336
0.082
0.504
0.672
117
Nonferrous
Brass Sheets
Brass Tube
30.11.2007
10:28 Uhr
Seite 118
Brass
Round Bar, Square Bar, Hexagon Bar
Brass Round Bar
2
2.5
3
3.5
4
5
5.5
6
6.5
7
8
8.5
9
10
11
12
13
13.5
14
14.5
15
16
17
18
19.5
20
21
22
23
24
25
26
28
29
30
31
32
34
35
36
37
38
40
42
44
45
48
50
52
55
60
65
70
75
80
85
90
100
105
110
120
130
140
150
160
180
190
200
225
230
240
250
280
300
330
350
118
KG/MTR
0.026
0.042
0.061
0.081
0.106
0.165
0.199
0.237
0.279
0.323
0.422
0.476
0.534
0.636
0.798
0.916
1.114
1.202
1.308
1.386
1.501
1.708
1.952
2.162
2.507
2.669
2.908
3.229
3.573
3.843
3.974
4.458
5.170
5.546
6.005
6.337
6.752
7.623
7.789
8.546
9.027
9.522
10.550
11.632
12.766
12.876
15.193
16.485
17.830
20.430
23.456
27.860
32.311
37.091
42.202
47.642
53.411
65.940
73.564
79.787
94.954
107.459
129.242
148.365
170.816
216.189
238.043
263.760
333.821
352.975
379.814
417.031
516.970
600.525
718.087
807.765
a
4
5
6
7
8
9
10
12
15
17
18
20
22
25
30
35
40
45
46
50
55
60
65
70
75
80
90
100
120
130
KG/MTR
0.134
0.210
0.302
0.412
0.538
0.680
0.840
1.210
1.890
2.428
2.722
3.360
4.066
5.250
7.560
10.290
13.440
17.010
17.774
21.000
25.410
30.240
35.490
41.160
47.813
53.760
68.040
84.000
122.400
141.960
KG/MTR
0.116
0.182
0.262
0.356
0.466
0.589
0.727
0.880
1.047
1.229
1.443
1.637
1.862
2.102
2.357
2.626
3.208
3.520
4.190
5.302
6.546
7.448
9.427
10.503
12.227
12.831
15.391
16.067
26.185
35.640
47.105
53.177
58.916
30.11.2007
10:28 Uhr
Seite 119
Brass
Flat Bars
a
5
6
6
6
7
8
8
8
8
10
10
10
10
10
10
12
12
12
12
12
12
14
15
15
15
15
15
15
15
16
20
20
20
20
20
20
20
20
20
22
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
35
35
35
35
40
40
40
40
b
6
2
4
5
2,5
2
3
4
5
2
3
4
5
6
8
2
3
4
5
6
8
4
2
3
4
5
6
8
10
8
2
3
4
5
6
8
10
12
15
4
3
4
5
6
8
10
15
20
2
3
4
5
6
8
10
12
15
20
2
3
4
5
6
8
10
12
15
20
1,5
3
3,5
4
KG/MTR
0.126
0.101
0.202
0.252
0.147
0.134
0.202
0.269
0.336
0.168
0.252
0.336
0.420
0.504
0.672
0.204
0.302
0.403
0.504
0.612
0.806
0.470
0.252
0.378
0.504
0.638
0.756
1.020
1.260
1.075
0.336
0.504
0.672
0.840
1.020
1.360
1.680
2.016
2.520
2.739
0.630
0.840
1.063
1.260
1.680
2.100
3.150
4.250
0.504
0.756
1.008
1.260
1.512
1.992
2.520
3.024
3.825
5.040
0.588
0.882
1.190
1.488
1.764
2.352
2.940
3.528
4.463
5.880
0.504
1.020
1.176
1.360
a
40
40
40
40
40
40
40
40
40
45
45
45
50
50
50
50
50
50
50
50
50
50
50
55
60
60
60
60
60
60
60
60
60
60
70
70
70
70
70
70
80
80
80
80
80
80
80
80
80
80
90
90
90
90
90
100
100
100
100
100
100
100
100
100
120
120
125
140
150
150
150
160
b
4,5
5
6
8
10
15
20
25
30
5
8
10
3
4
5
6
10
12
13
15
20
25
30
15
4
5
6
8
10
12
15
20
30
40
5
6
8
10
12
20
4
5
6
10
15
20
25
30
40
50
2
5
10
15
70
5
8
10
12
15
20
25
30
50
10
40
60
60
10
20
70
10
Nonferrous
KG/MTR
1.512
1.680
2.016
2.688
3.360
5.040
6.880
8.400
10.080
1.890
3.024
3.780
1.260
1.700
2.100
2.520
4.250
5.100
5.460
6.375
8.500
10.500
12.750
6.930
2.016
2.550
3.024
4.032
5.040
8.120
7.650
10.200
15.120
20.160
2.975
3.528
4.704
5.950
7.140
11.760
2.720
3.400
4.080
6.800
10.200
13.440
16.880
20.160
26.880
33.600
1.512
3.780
7.560
11.340
52.920
4.200
6.720
8.400
10.320
12.600
16.800
21.000
25.200
42.000
10.080
40.320
63.000
71.400
12.600
25.200
89.250
13.600
119
30.11.2007
10:28 Uhr
Seite 120
Aluminium
Tubes
d
4
4
5
6
6
7
8
8
8
10
10
10
10
10
10
12
12
12
12
13
13
13
14
15
15
15
16
16
16
16
18
18
18
18
20
20
20
20
20
20
20
22
22
23
24
25
25
25
25
25
25
26
26
28
28
28
28
28
28
30
30
30
30
30
30
30
30
32
120
s
0,5
1
1
0,5
1
1
0,75
1
1,5
0,75
1
1,5
2
2,5
3
1
1,5
2
3
1
1,5
3
2
1
1,5
2
1
1,5
2
3
1,5
2
3
4
0,5
1
1,5
2
2,5
3
5
1,5
2
2
2
1,5
2
2,5
3
3,5
5
2
3
1,5
2
2,5
3
4
5
1,5
2
2,5
3
4
5
7
7,5
2
KG/MTR
0,015
0,025
0,034
0,023
0,042
0,051
0,046
0,059
0,083
0,059
0,076
0,108
0,136
0,159
0,178
0,096
0,134
0,170
0,229
0,102
0,146
0,254
0,203
0,119
0,172
0,220
0,127
0,184
0,237
0,331
0,205
0,271
0,382
0,475
0,085
0,161
0,235
0,301
0,371
0,426
0,659
0,261
0,348
0,376
0,394
0,307
0,390
0,477
0,560
0,655
0,848
0,407
0,585
0,337
0,453
0,540
0,636
0,835
0,975
0,376
0,475
0,583
0,687
0,882
1,060
1,365
1,431
0,509
d
35
35
35
35
35
35
35
36
36
37
37
38
39
40
40
40
40
40
40
40
40
40
40
42
42
42
42
44
44
45
45
45
45
47
48
48
48
50
50
50
50
50
50
50
50
50
50
50
51
52
52
53
54
55
55
55
56
57
57
58
60
60
60
60
60
60
60
60
s
1,5
2
2,5
3
4
5
7,5
2
3
3
4
3
3,5
1,5
2
2,5
3
3,5
4
5
6
7
10
2
3
5
9
3
12
2,5
5
8
10
3
3
4
5
1,5
2
2,5
3
4
5
6
7
8
10
12,5
4
4
6
6
9
2,5
5
10
3
3
8,5
5
2
2,5
3
4
5
6
8
10
KG/MTR
0,426
0,560
0,689
0,859
1,079
1,305
1,749
0,591
0,839
0,881
1,140
0,890
1,073
0,490
0,644
0,795
0,941
1,143
1,221
1,484
1,775
1,929
2,543
0,678
0,992
1,568
2,658
1,101
3,183
0,901
1,740
2,576
2,967
1,181
1,145
1,492
1,924
0,617
0,814
1,007
1,195
1,601
1,958
2,238
2,619
2,849
3,391
3,976
1,570
1,628
2,288
2,524
3,624
1,113
2,120
3,815
1,348
1,450
3,443
2,288
0,983
1,219
1,450
2,005
2,392
2,747
3,529
4,239
d
60
61
64
65
65
65
65
65
65
66
67
70
70
70
70
70
70
70
70
70
72
74
75
75
75
75
76
80
80
80
80
80
80
80
80
80
85
85
85
86
90
90
90
90
s
15
11
4
2,5
4
5
10
15
20
3
8,5
2
2,5
3
4
5
8
10
15
20
5
14
2
2,5
5
10
3
2
2,5
3
5
6
8
10
15
20
2,5
5
10
3
2,5
3
5
10
KG/MTR
5,723
4,594
1,990
1,325
2,023
2,543
4,663
6,362
7,630
1,662
4,216
1,153
1,409
1,704
2,321
2,857
4,207
5,087
7,176
8,478
2,798
7,122
1,219
1,537
3,044
5,511
1,857
1,323
1,643
1,915
3,179
3,708
4,883
5,935
8,511
10,174
1,749
3,481
6,359
2,111
1,855
2,213
3,603
6,782
30.11.2007
10:28 Uhr
Seite 121
Aluminium
Tubes & Square Tubes
S
11
15
20
25
2.5
7.5
10
2
2.5
4
5
10
12
12.5
15
16
20
21.25
25
10
15
3
4
5
3
5
10
15
20
25
3
5
8
10
12.5
15
20
25
3
5
10
3
5
10
15
20
20
12.5
5
9
10
5
7.5
10
15
20
25
30
3
5
7.5
8
10
15
17.5
20
KG/MTR
7.367
9.785
11.869
13.777
1.961
5.564
7.046
1.662
2.067
3.256
4.027
7.832
8.953
9.273
10.809
11.690
13.916
14.187
15.896
8.054
11.445
2.620
3.527
4.482
2.721
4.451
8.702
12.081
15.260
18.016
2.976
4.875
7.596
9.326
11.688
13.353
16.956
20.657
3.103
5.087
9.750
3.230
5.436
10.174
14.625
18.652
19.000
12.770
5.511
9.614
10.598
5.723
8.425
11.430
15.904
20.347
25.277
28.703
3.739
6.055
9.061
9.631
11.605
17.168
19.658
22.043
d
150
160
160
160
160
160
160
160
160
161
165
170
170
170
170
170
170
170
170
180
180
180
180
185
190
190
190
200
200
200
200
200
200
200
200
200
200
200
210
210
210
220
220
220
230
230
230
230
S
25
4
5
6
8
10
15
20
30
4
25
3
5
10
12.5
15
20
25
45
6
10
15
20
9
3
6
10
4
5
6
8
10
12.5
15
20
25
27.5
4
5
10
20
10
15
30
6
10
15
25
KG/MTR
26.494
5.293
6.570
7.838
10.309
12.717
18.440
23.738
34.901
5.324
30.442
4.247
6.994
13.565
16.691
19.711
25.434
31.871
47.689
8.851
14.413
21.527
27.130
13.429
4.756
9.360
15.260
6.647
8.266
9.868
13.022
16.108
19.870
23.526
30.521
37.091
40.218
6.918
8.690
16.956
32.216
18.265
26.070
48.325
11.394
18.652
27.342
43.450
a
10
15
20
20
25
25
25
30
30
30
30
30
34
35
40
40
40
40
40
40
40
40
40
40
50
50
50
50
50
50
60
60
60
60
60
60
60
80
80
80
80
80
80
100
100
100
100
100
100
100
120
120
140
150
150
160
180
200
200
a
10
15
10
20
15
25
25
10
15
20
30
30
20
35
20
20
20
25
25
35
40
40
40
40
20
25
30
40
50
50
20
30
40
40
40
60
60
40
40
50
60
80
80
18
30
40
50
50
50
100
40
50
40
40
50
40
40
50
80
s
1
2
2
2
2
1.5
2
1.5
2
2
2
3
3
2
2
2.5
3
3
5
2.5
2
2.5
3
4
2
2
3
4
3
4
2
3
2.5
3
4
3
4
3
4
4
4
3
4
2
3
4
2
3
4
4
4
4
2
4
4
4
4
4
4
Nonferrous
d
90
90
90
90
95
95
95
100
100
100
100
100
100
100
100
100
100
100
100
105
105
106
108
108
110
110
110
110
110
110
120
120
120
120
120
120
120
120
125
125
125
130
130
130
130
130
132
133
135
135
135
140
140
140
140
140
140
140
150
150
150
150
150
150
150
150
KG/MTR
0.097
0.281
0.281
0.389
0.389
0.391
0.497
0.300
0.443
0.497
0.605
0.875
0.778
0.713
0.605
0.743
0.875
0.956
1.524
0.945
0.821
1.013
1.199
1.596
0.713
0.767
1.199
1.771
1.523
1.987
0.821
1.361
1.283
1.523
1.987
1.847
2.419
1.847
2.419
2.635
2.851
2.495
3.283
1.231
2.009
2.851
1.577
2.333
3.067
4.147
3.283
3.499
1.901
3.931
4.147
4.147
4.579
5.227
5.875
121
30.11.2007
10:28 Uhr
Seite 122
Aluminium
Sheets/Plates
s
0.3
0.5
0.5
0.5
0.6
0.6
0.7
0.8
0.8
0.81
1
1
1
1
1.01
1.2
1.2
1.2
1.2
1.2
1.27
1.3
1.5
1.5
1.5
1.5
1.6
1.6
1.8
2
2
2
2
2
2.3
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
3.2
3.2
3.8
4
4
4
4
4
4
4
4.5
5
122
a
500
1000
1000
1250
1000
1220
1000
1000
1220
1220
1000
1220
1250
1500
445
1000
1220
1220
1250
1500
445
1220
1000
1020
1250
1500
1220
1250
2000
1000
1220
1250
1500
1980
1220
1000
1200
1200
1250
1500
1700
1850
1000
1220
1250
1250
1500
1500
1200
1700
1000
1000
1220
1250
1380
1500
1500
1500
1500
1000
b
2000
1000
2000
2500
2000
3660
2000
2000
3660
2500
2000
3660
2500
3000
1220
2000
2500
3660
2500
3000
1220
3660
2000
2020
2500
3000
3660
2500
5000
2000
3660
2500
3000
2646
3660
2000
3000
5000
2500
3000
4700
2350
2000
3660
2500
3200
2500
3000
2200
2700
2000
2000
3660
2500
4535
2510
2800
3000
3000
2000
KG/sqm
0.810
1.400
1.330
1.385
1.662
1.662
1.862
2.128
2.216
2.244
2.660
2.770
2.770
2.660
2.828
3.192
3.324
3.324
3.324
3.240
3.556
3.601
4.200
4.155
3.990
3.990
4.432
4.432
4.986
5.320
5.540
5.540
5.320
5.320
6.371
6.650
6.925
6.925
6.925
6.650
6.925
6.925
7.980
8.310
7.980
8.310
8.310
8.040
8.864
8.864
10.260
10.640
11.080
11.080
11.080
11.080
10.640
10.640
12.150
13.850
s
5
5
5
5
6
6
6
6
6
6
6.5
7
8
8
8
8
8
10
10
10
10
10
12
12
12
12
12
14
15
15
15
15
15
16
16
20
20
20
20
20
25
25
25
25
25
25
25
26
30
30
30
30
30
30
30
30
32
32
33.8
3.5
a
1000
1250
1500
1500
1000
1020
1250
1250
1500
1500
1200
2610
1000
1020
1025
1250
1500
1000
1020
1200
1250
1500
670
1000
1020
1250
1500
975
1000
1005
1020
1250
1500
1020
1250
1000
1010
1020
1250
1500
1000
1020
1200
1215
1250
1500
1500
1500
10U0
1010
1020
1200
1250
1490
1500
2020
12U0
1250
1020
1500
b
3550
2500
2500
3000
2000
2020
2500
5000
3000
4000
2000
5200
2000
2020
3955
2500
3000
2000
2020
1980
2500
3000
1090
2000
2020
2500
3000
2260
2000
3160
2020
2500
3000
2020
2500
2000
1470
2020
2500
3000
2000
2020
1400
3030
2500
2500
3000
3000
2000
4100
2020
1750
2500
3000
3000
3500
2000
2500
2020
3000
KG/sqm
13.500
13.850
13.850
13.300
15.960
16.680
16.620
15.960
16.620
16.200
17.290
18.620
21.280
21.600
21.280
22.160
21.280
27.000
27.000
28.000
26.600
26.600
33.600
31.920
33.240
33.240
31.920
37.800
39.900
39.900
40.500
39.900
39.900
44.320
44.800
53.200
56.000
53.200
56.000
53.200
66.500
69.250
69.250
69.250
69.250
70.000
66.500
72.280
79.800
79.800
83.100
84.000
84.000
83.400
79.800
79.800
88.640
89.600
93.626
98.000
s
40
40
40
40
40
40
40
40
42
45
45
45
45
50
50
50
50
50
50
52
55
60
60
60
60
63
63
63
70
70
70
70
70
70
77
80
80
80
80
80
85
85
90
90
90
100
100
100
100
100
105
110
110
120
120
120
120
120
125
130
a
1000
1020
1200
1200
1250
1250
1270
150D
1000
950
1020
1250
1440
1000
1020
1200
1250
1500
1500
1020
1500
1000
1020
1500
1520
lODO
1200
1500
375
850
1000
1020
1400
1500
1500
1000
1020
1200
1250
1500
750
1500
1000
1205
1500
1000
1020
1200
1300
1500
1265
1000
1500
1000
1110
1180
1250
1500
1060
1000
b
2000
2020
2000
2500
2500
2520
2520
3000
2000
1870
2020
2500
2900
2000
2020
2500
2500
2500
3000
2020
3000
2000
2020
3000
3020
2000
2500
2500
3000
2200
2000
2020
2100
3000
3000
2000
2020
2500
2500
3000
2200
3000
2000
3200
3000
2000
2020
2500
2300
3000
3000
2000
3000
2000
3000
2020
2500
3000
3000
2000
KG/sqm
106.400
110.800
110.800
112.000
112.000
110.800
112.000
111.200
116.760
126.000
125.100
126.000
126.000
133.000
138.500
138.500
140.000
138.500
139.000
144.560
152.900
168.000
162.000
166.200
168.000
176.400
174.510
176.400
194.600
196.000
194.600
186.200
193.900
186.200
214.060
221.600
212.800
224.000
224.000
222.400
238.000
236.300
252.000
250.200
239.400
266.000
280.000
277.000
277.000
278.000
291.900
292.600
305.800
333.600
333.600
333.600
336.000
332.400
347.500
364.000
30.11.2007
10:28 Uhr
Seite 123
Aluminium
Sheets/Plates/Flat Bars
s
130
130
140
140
140
140
145
150
150
150
150
15B
160
160
170
180
180
190
200
210
220
250
300
a
10
10
10
10
10
10
10
12
12
15
15
15
15
15
15
15
19,05
20
20
20
20
20
20
20
20
20
24
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
a
1020
1020
560
945
1020
1020
1000
900
1020
1020
1500
1020
855
1020
1010
1000
1020
1020
1D20
1020
1020
1020
1020
b
2
3
4
5
6
7
8
3
5
2
3
4
5
6
8
10
6,35
2
3
4
5
6
8
10
12
15
10
2
3
4
5
6
8
10
12
15
20
2
3
4
5
6
8
10
12
b
2020
3000
1200
3000
2020
3000
2000
2020
2020
3000
3000
2020
2020
2020
2020
2000
2020
2020
2020
2020
2020
2020
2020
KG/sqm
345.800
361.400
378.000
389.200
389.200
389.200
391.500
417.000
417.000
417.000
399.000
420.280
444.800
444.800
472.600
478.800
500.400
528.200
556.000
558.600
611.600
695.000
834.000
KG/MTR
0,054
0,083
0,108
0,133
0,160
0,200
0,216
0,097
0,162
0,081
0,122
0,162
0,203
0,239
0,324
0,405
0,335
0,108
0,162
0,216
0,277
0,324
0,432
0,540
0,648
0,831
0,634
0,135
0,203
0,264
0,338
0,405
0,540
0,693
0,810
1,013
1,350
0,162
0,249
0,319
0,405
0,499
0,638
0,810
0,972
Nonferrous
Aluminium Sheets/Plates
s1
2.5
2.5
2.5
3.5
3.5
4
5
5
5
5
8
s2
4
9
4
5
5
5.5
6.5
6.5
6.5
7
9.5
a
1000
1250
1500
1000
1500
1000
1000
1250
1500
1500
1500
b
2000
2500
3000
2000
3000
4000
2000
2500
3000
3000
3000
KG/sqm
7.30
7.30
7.30
10.00
10.00
11.50
14.40
14.40
14.40
14.58
22.99
a
30
30
35
35
35
35
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
45
50
50
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
60
60
60
60
s2
4
4
6.5
b
15
20
2
3
4
5
6
8
10
2
3
4
5
6
8
10
12
15
20
25
30
12
2
3
4
5
6
8
10
12
15
20
25
30
3
4
5
6
8
10
15
20
25
30
40
a
1250
1500
1770
KG/MTR
1,215
1,620
0,189
0,291
0,378
0,473
0,567
0,756
0,945
0,213
0,319
0,432
0,540
0,648
0,864
1,080
1,296
1,620
2,160
2,700
3,240
1,458
0,270
0,399
0,540
0,675
0,810
1,080
1,350
1,620
2,025
2,700
3,463
4,050
0,486
0,665
0,810
0,972
1,277
1,620
2,493
3,384
4,230
5,130
6,840
b
2500
3000
3300
a
60
65
70
70
70
70
70
75
75
75
80
80
80
80
80
80
80
80
80
85
90
90
90
100
100
100
100
100
KG/sqm
7.30
7.30
14.58
b
45
5
5
10
15
20
30
3
9
20
5
6
10
15
20
25
30
40
50
30
5
10
60
4
5
6
8
10
KG/MTR
7.290
0.878
0.931
1.890
2.835
3.780
5.985
0.608
1.796
4.050
1.080
1.330
2.160
3.240
4.432
5.700
6.480
8.640
11.080
6.885
1.215
2.430
14.580
1.080
1.350
1.620
2.160
2.700
a
b
123
30.11.2007
10:28 Uhr
Seite 124
Aluminium
Round Bars, Square Bars, Hexagon Bars
d
1
2
2.5
3
4
5
6
7
7.5
8
9
10
11
12
14
15
16
18
20
21
22
24
25
26
27
28
30
31
32
35
36
38
40
45
46
50
55
56
60
62
63
64
65
70
75
80
82
85
90
95
100
110
120
125
130
124
KG/MTR
0.002
0.008
0.014
0.020
0.035
0.053
0.075
0.107
0.119
0.133
0.172
0.220
0.256
0.317
0.426
0.495
0.563
0.705
0.879
0.987
1.052
1.221
1.359
1.486
1.545
1.637
1.908
2.037
2.251
2.741
2.818
3.140
3.517
4.197
4.651
5.495
6.601
6.893
7.828
8.147
8.724
8.907
9.187
10.655
12.231
14.067
14.040
15.710
17.804
19.632
21.980
26.996
31.651
33.976
36.748
d
140
145
150
153
155
160
170
175
180
185
190
195
200
210
220
230
240
245
248
250
260
270
280
290
295
298
300
310
314
320
330
340
350
360
370
380
400
420
430
440
450
460
470
480
490
500
510
520
530
540
560
630
KG/MTR
42.619
44.562
49.455
48.880
52.807
56.269
63.522
64.910
71.215
72.540
78.781
80.594
86.978
95.893
108.283
117.105
125.700
127.223
137.600
135.903
147.523
152.222
170.477
184.852
194.697
184.037
196.407
200.666
208.97b
223.468
227.394
241.384
267.332
270.618
285.861
301.522
334.096
368.341
386.090
404.256
422.840
441.842
461.261
481.098
501.353
522.025
543.115
564.622
586.547
608.890
654.828
828.767
a
5
6
8
10
12
14
15
16
18
20
24
25
30
35
40
45
50
55
60
65
70
80
100
110
120
130
140
150
180
200
a
5
6
8
10
12
14
15
16
18
20
24
25
30
35
40
45
50
55
60
65
70
80
100
110
120
130
140
150
180
200
KG/MTR
0.069
0.097
0.173
0.270
0.389
0.543
0.608
0.691
0.875
1.128
1.555
1.781
2.565
3.308
4.560
5.468
7.125
8.168
10.260
12.041
13.965
18.240
28.200
32.670
38.880
45.630
52.920
64.125
87.480
108.000
KG/MTR
0.058
0.084
0.115
0.247
0.355
0.407
0.484
0.713
0.891
1.194
1.421
1.799
2.182
2.527
3.198
5.845
9.878
23.400
30.11.2007
10:28 Uhr
Seite 125
Bronze
Bushings - Sizes and weights
9
9
14
14
19
kg/m
2,53
4,20
3,39
5,40
4,23
31
36
14
19
24
7,76
6,60
5,08
41
14
19
24
29
10,48
9,31
7,80
5,92
14
19
24
29
34
13,56
12,39
10,87
9,00
6,78
46
51
19
24
29
34
39
15,82
14,30
12,42
10,20
7,62
56
19
24
29
34
39
19,60
18,07
16,20
13,98
11,40
61
24
29
34
39
44
22,20
20,34
18,11
15,53
12,60
66
24
29
34
39
44
49
26,69
24,82
22,60
20,02
17,09
13,80
24
29
34
39
44
49
54
31,53
29,66
27,43
24,82
21,93
18,64
15,01
24
29
34
39
44
49
54
59
36,73
34,85
32,63
30,05
27,12
23,84
20,19
16,20
mm
81 x
86
91
96
101 x
71
76
101 x
29
34
39
44
49
54
59
kg/m
40,40
38,17
35,59
32,67
29,38
25,74
21,75
29
34
39
44
49
54
59
64
46,30
44,08
41,50
38,57
35,28
31,64
27,64
23,30
29
34
39
44
49
54
59
64
69
52,55
50,33
47,74
44,82
41,53
37,90
33,90
29,55
24,85
29
34
39
44
49
54
59
64
69
74
59,16
56,93
54,35
51,41
48,14
44,49
40,50
36,16
31,46
26,42
39
44
49
54
59
64
69
74
79
61,31
58,38
55,09
51,46
47,47
43,12
38,42
33,37
27,97
39
44
49
54
59
64
69
74
79
68,62
65,69
62,41
58,76
54,78
50,43
45,73
40,69
35,28
mm
111 x
39
44
49
54
59
64
69
74
79
kg/m
76,28
73,35
70,07
66,43
62,44
58,09
53,40
48,35
42,94
44
49
54
59
64
69
74
79
84
89
81,79
78,49
74,83
70,82
66,45
61,73
56,65
51,22
45,44
39,29
54
59
64
69
74
79
84
89
94
99
83,24
79,23
74,86
70,14
65,07
59,64
53,85
47,71
41,21
34,36
59
64
69
74
79
84
89
94
99
104
88,00
83,63
78,91
73,84
68,40
62,62
56,48
49,98
43,13
35,92
59
69
79
89
99
109
97,12
88,04
77,53
65,60
52,25
37,48
59
69
79
89
99
109
119
116,44
107,35
96,84
84,91
71,56
56,80
40,61
mm
150 x
60
70
80
90
100
110
120
130
kg/m
133,51
124,33
113,73
101,72
88,30
73,46
57,21
39,55
70
80
90
100
110
120
130
140
146,23
135,62
123,61
110,19
95,36
79,11
61,45
42,38
170 x
70
80
90
100
110
120
130
140
160
169,54
158,93
146,82
133,51
118,67
102,43
84,77
65,69
45,20
180 x
80
90
100
110
120
130
140
150
160
183,66
171,65
158,22
143,38
127,15
109,49
90,41
69,93
48,02
190 x
80
90
100
110
120
130
140
150
160
170
209,80
197,79
184,37
169,52
153,28
135,63
116,56
96,06
74,17
50,86
90
100
110
120
130
140
150
160
170
180
225,35
212,35
197,08
180,85
163,19
144,10
123,62
101,72
78,40
53,68
160 x
116 x
121 x
126 x
141 x
200 x
131 x
mm
250 x
100
110
120
130
140
150
160
170
180
190
200
kg/m
370,88
356,03
339,80
322,14
303,05
282,57
260,67
237,35
212,63
187,44
158,94
300 x
120
130
140
150
160
170
180
190
200
210
220
230
240
250
534,07
516,41
497,33
476,84
454,94
431,62
406,90
382,69
353,22
325,89
295,36
263,41
230,04
194,27
350 x
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
706,53
684,63
661,22
636,60
610,46
582,81
553,94
523,56
491,77
458,57
423,86
387,87
350,43
311,57
271,30
229,59
350 x
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
847,72
818,90
788,52
756,73
723,53
688,77
652,82
615,38
576,52
536,25
494,50
451,48
406,96
361,03
313,69
264,91
Nonferrous
mm
21 x
26 x
125
30.11.2007
10:28 Uhr
Seite 126
Bronze
Hollow Bars - Sizes and weights
mm
kg/m
21
2,53
26
9
14
4,20
3,39
31
14
19
5,40
4,23
36
14
19
24
7,76
6,60
5,08
41
14
19
24
29
10,48
9,31
7,80
5,92
46
14
19
24
29
34
13,56
12,39
10,87
9,00
6,78
51
19
24
29
34
39
15,82
14,30
12,42
10,20
7,62
56
19
24
29
34
39
19,60
18,07
16,20
13,98
11,40
24
29
34
39
44
22,20
20,34
18,11
15,53
12,60
24
29
34
39
44
49
26,69
24,82
22,60
20,02
17,09
13,80
24
29
34
39
44
49
54
31,53
29,66
27,43
24,82
21,93
18,64
15,01
24
29
34
39
44
49
54
59
36,73
34,85
32,63
30,05
27,12
23,84
20,19
16,20
61
66
71
76
126
mm
kg/m
81
29
34
39
44
49
54
59
40,40
38,17
35,59
32,67
29,38
25,74
21,75
86
29
34
39
44
49
54
59
64
46,30
44,08
41,50
38,57
35,28
31,64
27,64
23,30
29
34
39
44
49
54
59
64
69
52,55
50,33
47,74
44,82
41,53
37,90
33,90
29,55
24,85
29
34
39
44
49
54
59
64
69
74
59,16
56,93
54,35
51,41
48,14
44,49
40,50
36,16
31,46
26,42
39
44
49
54
59
64
69
74
79
61,31
58,38
55,09
51,46
47,47
43,12
38,42
33,37
27,97
39
44
49
54
59
64
69
74
79
68,62
65,69
62,41
58,76
54,78
50,43
45,73
40,69
35,28
91
96
101 x
101 x
mm
kg/m
111 x
39
44
49
54
59
64
69
74
79
76,28
73,35
70,07
66,43
62,44
58,09
53,40
48,35
42,94
116 x
44
49
54
59
64
69
74
79
84
89
81,79
78,49
74,83
70,82
66,45
61,73
56,65
51,22
45,44
39,29
54
59
64
69
74
79
84
89
94
99
83,24
79,23
74,86
70,14
65,07
59,64
53,85
47,71
41,21
34,36
59
64
69
74
79
84
89
94
99
104
88,00
83,63
78,91
73,84
68,40
62,62
56,48
49,98
43,13
35,92
59
69
79
89
99
109
97,12
88,04
77,53
65,60
52,25
37,48
59
69
79
89
99
109
119
116,44
107,35
96,84
84,91
71,56
56,80
40,61
121 x
126 x
141 x
mm
150 x
60
70
80
90
100
110
120
130
133,51
124,33
113,73
101,72
88,30
73,46
57,21
39,55
160 x
70
80
90
100
110
120
130
140
146,23
135,62
123,61
110,19
95,36
79,11
61,45
42,38
170 x
70
80
90
100
110
120
130
140
160
169,54
158,93
146,82
133,51
118,67
102,43
84,77
65,69
45,20
180 x
80
90
100
110
120
130
140
150
160
183,66
171,65
158,22
143,38
127,15
109,49
90,41
69,93
48,02
190 x
80
90
100
110
120
130
140
150
160
170
209,80
197,79
184,37
169,52
153,28
135,63
116,56
96,06
74,17
50,86
90
100
110
120
130
140
150
160
170
180
225,35
212,35
197,08
180,85
163,19
144,10
123,62
101,72
78,40
53,68
200 x
131 x
kg/m
mm
kg/m
250 x
100
110
120
130
140
150
160
170
180
190
200
370,88
356,03
339,80
322,14
303,05
282,57
260,67
237,35
212,63
187,44
158,94
300 x
120
130
140
150
160
170
180
190
200
210
220
230
240
250
534,07
516,41
497,33
476,84
454,94
431,62
406,90
382,69
353,22
325,89
295,36
263,41
230,04
194,27
350 x
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
706,53
684,63
661,22
636,60
610,46
582,81
553,94
523,56
491,77
458,57
423,86
387,87
350,43
311,57
271,30
229,59
350 x
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
847,72
818,90
788,52
756,73
723,53
688,77
652,82
615,38
576,52
536,25
494,50
451,48
406,96
361,03
313,69
264,91
30.11.2007
10:28 Uhr
Seite 127
Bushings
rough-turned, electric spim casting
fr Fertigma
mm
162x58
68
78
88 1) 2)
98 1) 2)
108 1) 2)
118 1) 2)
128
138
172 x 88
98
108
118
128
138
148
182 x 98
118
128
160 x60
70
80
90
100
110
120
130
140
170 x 90
100
110
120
130
140
150
180 x 100
120
130
Gewicht
kg/m
156,4
147,8
137,8
126,4
113,7
99,6
84,2
67,4
49,2
149,2
136,5
122,5
107,0
90,2
72,0
52,5
160,7
131,2
114,4
Lieferma
mm
138
148
158
192 x 108
148
158
202 x 98
118
138
158
212 x 178
222 x 98
118
fr Fertigma
mm
140
150
160
190 x 110
150
160
200 x 100
120
140
160
210 x 180
220 x 100
120
Gewicht
kg/m
Lieferma
mm
fr Fertigma
mm
96,2
76,7
55,8
172,2
102,2
81,3
213,2
183,7
148,7
108,2
92,7
271,2
241,6
222 x 158
178
232 x 138
178
242 x 118
158
252 x 158
178
262 x 178
188
272 x 208
282 x 218
233
248
302 x 218
312 x 208
220 x 160
180
230 x 140
180
240 x 120
160
250 x 160
180
260 x 180
190
270 x 210
280 x 220
235
250
300 x 220
310 x 210
Lieferma
mm
fr Fertigma
mm
23
163 x 19
23
183 x 19
23
203 x 19
23
310 x 45
55
20
160 x 16
20
180 x 16
20
200 x 16
20
300 x 40
50
Lieferma
mm
fr Fertigma
mm
Nonferrous
Lieferma
mm
Gewicht
kg/m
166,2
120,3
237,6
186,1
305
229,6
284,2
217,4
252,5
227,5
210
218,7
172,4
123,1
298,5
369,5
fr Fertigma
mm
50 x 10
12
16
20
60 x 10
12
16
20
65 x 10
12
16
20
30
70 x 10
Gewicht
kg/m
5,6
6,5
8,3
10,2
6,6
7,7
10
12,2
7,2
8,4
10,7
13,1
19,1
8,5
Lieferma
15
19
23
83 x 13
15
19
23
103 x 13
15
19
23
123 x 19
123 x 19
143 x 19
fr Fertigma
mm
12
16
20
80 x 10
12
16
20
100 x 10
12
16
20
120 x 16
120 x 20
140 x 16
Gewicht mm
kg/m
9,7
12,3
15
9,6
11,1
14
17
11,9
13,8
17,4
21,4
20,8
25,2
24,2
Gewicht
kg/m
29,2
27,6
33,4
31
37,4
34,4
41,5
124,2
151,7
u.s.w.
Lieferma
mm
fr Fertigma
mm
32 x 32*
42 x 42*
52 x 52*
30 x 30
40 x 40
50 x 50
Gewicht
kg/m
9,1
15,7
24
Lieferma
mm
fr Fertigma
mm
Gewicht
kg/m
62 x 62*
72 x 72*
82 x 82*
60 x 60
70 x 70
80 x 80
34,2
47,5
60,2
92 x 92*
102 x 102*
112 x 112*
90 x 90
100 x 100
110 x 110
Gewicht
kg/m
75,8
93
115,0
127
30.11.2007
10:28 Uhr
Seite 128
ND
inch
ND
mm
Actual
mm
10 Bar System
WT
weight
mm
KG/M
1/8
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
7
8
10
12
14
16
18
20
24
28
32
36
10
15
20
25
32
40
50
65
80
100
125
150
175
200
250
300
350
400
450
500
600
700
800
900
10
12
16
20
25
30
38
44
57
76,1
88,9
108
133
159
193,7
219,1
267
323,9
368
419
457,2
508
610
711
813
914
1,0
1,0
1,0
1,0
1,5
1,5
1,5
1,5
1,5
2,0
2,0
2,5
2,5
2,5
2,5
3,0
3,0
4,0
4,0
4,0
4,0
4,5
5,0
6,0
6,0
8,0
WT
mm
0,26
0,31
0,42
0,53
0,99
1,20
1,54
1,81
2,34
4,16
4,88
7,41
9,16
10,99
13,43
18,21
22,24
35,94
40,89
46,62
50,91
63,63
84,96
118,80
135,99
203,57
14 Bar System
weight
KG/M
1,0
1,0
1,0
1,0
1,5
1,5
1,5
1,5
1,5
2,0
2,5
2,5
3,0
3,0
3,5
3,5
4,0
5,0
5,5
6,0
6,0
6,5
8,0
9,0
10,0
11,0
16 Bar System
WT
weight
mm
KG/M
0,26
0,31
0,42
0,53
0,99
1,20
1,54
1,81
2,34
4,16
6,07
7,41
10,95
13,14
18,70
21,19
29,55
44,78
56,00
69,60
76,03
91,55
135,26
177,45
225,53
278,98
1,0
1,0
2,0
2,0
2,0
2,5
2,5
2,5
2,5
2,5
2,5
3,0
3,0
3,0
3,0
4,0
4,5
5,5
6,5
7,0
8,0
8,5
10,5
12,0
13,5
15,5
MAIN STANDARDS
NFA
GAM
BS
EEMUA
NES
Seamless Pipes
CuNi10 Fe1 Mn
51102
MM11
2871 CN 102
779 part 3
2875 CN 102
Seamwelded Pipes
CuNi10 Fe1 Mn
Bars
CuNi 10 Fe1 Mn
MM11
MM13
2872 CN 102
2874 CN 102
Plates
CuNi 10 Fe1 Mn
0,26
0,31
0,79
1,01
1,30
1,93
2,50
2,95
3,83
5,17
6,07
8,85
10,95
13,14
16,07
24,17
33,18
49,18
65,99
81,00
100,93
119,24
176,79
235,58
303,14
391,14
DIN
779 part 2
WT
mm
86019 2.1972
17664/17671 2.872
20 Bar System
weight
KG/M
1,0
1,0
2,0
2,0
2,0
2,5
2,5
2,5
2,5
2,5
2,5
3,0
3,0
3,5
3,5
4,5
5,5
7,0
8,0
9,0
9,5
11,0
13,0
15,0
17,0
19,0
0,26
0,31
0,79
1,01
1,30
1,93
2,50
2,95
3,88
5,17
6,07
8,85
10,95
15,29
18,70
27,12
40,39
62,30
80,89
103,64
119,45
153,54
217,97
293,22
380,06
477,60
EN
ASTM
12451 CW352 R
B 446 C70600
86018 2.1972
17644/17670 2.0872
B 467 C70600
17664 2.0872
17672 2.0872.10
B 151 C70600
B 249
2870 CN 102
2875 CN 102
B 171 C70600
B 402
Cnemical composition
Minimum
Maximum
Ni %
10,00
11,00
Fe %
1,50
1,80
Mn %
0,500
1,000
Mechanical Characteristics
Tensile stregth UTS, Rm (Mpa):
Yield stregth YS 0.2, Rp 0.2 (Mpa):
Elongation (E 5.65S) %
Hardness (HB 10 D2)
128
C%
Pb %
S%
P%
Zn %
Zr %
others %
Cu %
0,05
0,010
0,005
0,020
0,20
0,030
0,10
Balance
Physical Properties
310
110
35
70
mini
mini
mini
mini
Units
Kg/m3
8900
.cm
19
W/m. K
50
Cx10
17
Mpa
126.000
C
760-800
C
1100-1150
below 1,08 on special request
30.11.2007
10:28 Uhr
Seite 129
Actual
inch
Actual
mm
16
18
20
22
24
30
40
0,250
0,405
0,500
0,540
0,675
0,840
1,050
1,315
1,660
1,900
2,375
2,875
3,500
4,000
4,500
5,000
5,563
6,625
7,625
8,625
9,625
10,75
12,75
14,000
15,000
16,000
18,000
20,000
22,000
24,000
30,000
40,000
6,35
10,29
12,70
13,72
17,15
21,34
26,67
33,40
42,16
48,27
60,32
73,03
88,90
101,60
114,30
127,00
141,30
168,30
193,70
219,10
244,48
273,05
323,90
355,60
381,00
406,40
457,20
508,00
558,80
609,60
762,00
1.016,00
ND
inch
Actual
inch
Actual
mm
1/8
1/4
3/8
1/2
1/3
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
16
18
20
22
24
30
0,405
0,54
0,675
0,84
1,05
1,315
1,66
1,9
2,375
2,875
3,5
4
4,5
5,563
6,625
8,625
10,75
12,75
14
16
18
20
22
24
30
10,29
13,72
17,15
21,34
26,67
33,40
42,16
48,27
60,32
73,03
88,90
101,60
114,30
141,30
168,30
219,10
273,05
232,90
355,60
406,40
457,20
508,00
558,80
609,60
762,00
1/8
1/4
3/8
1/2
1/3
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
6
8
10
12
14
ASTM B 446/B467
WT
WT
weight weight
inch
mm
Lb/Ft KG/M
0,058
1,47
0,24
1,65
1,65
1,65
1,65
1,65
1,83
1,83
2,11
2,11
2,41
2,41
2,77
0,38
0,48
0,61
0,78
0,99
1,39
1,60
2,32
2,82
3,93
4,51
5,83
0,125
0,134
3,18
3,40
8,29 12,34
10,58 15,75
0,134
3,40
13,83 20,59
0,134
0,156
0,165
3,40
3,96
4,19
17,29 25,74
23,90 35,58
27,78 41,35
0,165
0,180
0,180
4,19
4,57
4,57
31,8 47,33
39,03 58,10
43,41 64,62
0,56
0,72
0,91
1,16
1,47
2,07
2,39
3,45
4,20
5,85
6,71
8,68
0,180
0,250
4,57
6,35
52,17 77,66
90,54 134,77
WT
mm
0,165 4,19
27,78
41,35
0,165
0,180
0,180
0,180
0,180
0,250
0,312
4,19
4,57
4,57
4,57
4,57
6,35
7,92
31,80
39,09
43,41
47,80
49,50
90,54
150,70
47,32
58,10
64,62
71,12
73,57
134,77
224,19
ANSI B 36.19 5 S
WT
weight weight
Lb/Ft KG/M mm
WT
mm
ANSI B 36.19 10 S
WT
weight weight
Lb/Ft KG/M mm
1,65
1,65
1,65
1,65
1,65
1,65
2,11
2,11
2,11
2,77
2,77
2,77
2,77
3,40
3,96
3,96
4,19
4,19
4,78
4,78
5,54
6,35
0,049
0,065
0,065
0,083
0,083
0,109
0,109
0,109
0,109
0,120
0,120
0,120
0,120
0,134
0,134
0,148
0,165
0,180
0,188
0,188
0,188
0,218
0,218
0,250
0,312
1,24
1,65
1,65
2,11
2,11
2,77
2,77
2,77
2,77
3,05
3,05
3,05
3,05
3,40
3,40
3,76
4,19
4,57
4,78
4,78
4,78
5,54
5,54
6,35
7,92
0,61
0,78
0,99
1,26
1,45
1,83
2,82
3,45
3,95
4,46
7,24
8,65
11,30
17,28
23,89
26,25
31,77
35,78
45,34
49,92
63,09
90,46
weight
KG/M
0,065
0,065
0,072
0,072
0,083
0,095
0,095
0,109
0,120
0,134
0,165
0,180
0,203
0,203
0,220
0,259
0,284
0,340
0,340
0,380
0,454
0,473
0,503
0,534
1,65
1,65
1,83
1,83
2,11
2,41
2,41
2,77
3,05
3,40
4,19
4,57
5,15
5,15
5,59
6,58
7,21
8,64
8,64
9,65
11,53
12,01
12,77
13,56
0,51
0,56
0,79
1,00
1,45
2,10
2,69
3,54
4,91
6,65
9,97
12,45
15,78
17,62
21,30
29,89
37,76
51,07
57,23
71,37
101,15
115,87
132,04
149,58
0,035
0,89
0,09
0,14
0,035
0,065
0,065
0,065
0,065
0,065
0,072
0,072
0,083
0,083
0,095
0,095
0,109
0,120
0,125
0,134
0,134
0,148
0,187
0,187
0,250
0,89
1,65
1,65
1,65
1,65
1,65
1,83
1,83
2,11
2,11
2,41
2,41
2,77
3,05
3,18
3,40
3,40
3,76
4,75
4,75
6,35
0,20
0,38
0,48
0,61
0,78
0,99
1,39
1,60
2,32
2,82
3,93
4,51
5,83
7,14
8,29
10,58
12,21
15,28
21,49
24,05
38,05
0,29
0,56
0,72
0,91
1,16
1,47
20,7
2,39
3,45
4,20
5,85
6,71
8,68
10,62
12,34
15,75
18,17
22,74
37,98
35,79
56,63
WT
mm
ANSI B 36.19 40 S
WT
weight weight
Lb/Ft
KG/M mm
WT
mm
ANSI B 36.19 80 S
WT
weight
weight
Lb/Ft
KG/M
mm
0,068
0,088
0,091
0,109
0,113
0,133
0,140
0,145
0,154
0,203
0,216
0,226
0,237
0,258
0,280
0,322
0,365
0,375
1,73
2,24
2,31
2,77
2,87
3,38
3,56
3,68
3,91
5,16
5,49
5,74
6,02
6,55
7,11
8,18
9,27
9,53
0,095
0,119
0,126
0,147
0,154
0,179
0,191
0,200
0,218
0,276
0,300
0,318
0,337
0,375
0,432
0,500
0,500
0,500
2,41
3,02
3,20
3,73
3,91
4,55
4,85
5,08
5,54
7,01
7,62
8,08
8,56
9,53
10,97
12,70
12,70
12,70
0,36
0,065
0,065
0,065
0,065
0,065
0,072
0,072
0,083
0,083
0,095
0,095
0,109
0,065
0,065
0,065
0,065
0,065
0,065
0,083
0,083
0,083
0,083
0,109
0,109
0,109
0,134
0,156
0,156
0,165
0,165
0,188
0,188
0,218
0,250
0,91
1,16
1,47
1,88
2,16
2,72
4,20
5,14
5,89
6,65
10,78
12,88
16,83
25,74
35,58
39,10
47,32
53,3067
54
74,36
93,97
134,74
0,21
0,38
0,48
0,77
0,98
1,60
2,05
2,38
3,01
4,02
4,93
5,67
6,40
8,84
10,75
15,27
21,24
27,51
31,61
36,19
40,77
52,47
57,78
72,21
112,59
0,32
0,56
0,72
1,14
1,46
2,38
3,06
3,54
4,48
5,99
7,35
8,44
9,53
13,17
15,74
22,74
31,63
40,98
47,09
53,91
60,72
78,16
86,07
107,56
167,70
0,28
0,48
0,64
0,97
1,29
1,91
2,59
3,09
4,16
6,60
8,63
10,37
12,29
16,64
21,60
32,53
46,10
56,48
0,42
0,72
0,96
1,44
1,92
2,85
3,86
4,61
6,19
9,83
12,86
15,45
18,30
24,78
32,18
48,45
68,66
84,13
0,34
0,38
0,53
0,67
0,98
1,41
1,81
2,38
3,30
4,47
6,70
8,37
10,61
11,84
14,32
20,08
25,38
34,32
38,46
47,96
67,97
77,90
88,80
101,00
0,36
0,61
0,84
1,24
1,68
2,48
3,41
4,14
5,72
8,73
11,68
14,25
17,07
23,67
32,53
49,42
62,33
74,51
0,53
0,91
1,25
1,84
2,50
3,69
5,08
6,16
8,52
13,00
17,39
21,22
25,42
35,26
48,46
73,61
92,84
110,98
129
Nonferrous
ND
inch
30.11.2007
10:29 Uhr
Seite 130
90Elbows
Long and short radius
DIN 86090/EEMUA 146
ANSI B 16.9
Tees
Equal and reducing
DIN 86088/EEMUA 146
ANSI B 16.9
Reducer
Concentric and eccentric
DIN 86089/EEMUA 146
ANSI B 16.9
End Caps
DIN 28011/EEMUA 146
ANSI B 16.9
Saddles
Equal and reducing
DIN 86087/EEMUA 146
Flanges
Collars/Inner Flange
Long type/short type
DIN 86037/EEMUA 145
ANSI B 16.9
Carbon Steel
Composite Slip On Flange
Outer flange
DIN 86036
DIN 86037/EEMUA 145/ EEMUA 145/ISO NP 10
ANSI B 16.9
Solid Slip On
Bulkhead
DIN 86068
Sprinkler
Bushes
Elbows 90
Socket Weld/Capillary
EEMUA 146
Plugs
Male
EEMUA 145
Nipples
Hexagonal/Pipes Threaded
Straight/Half/Reducing
Couplings
Socket Weld/Capillary/Threaded
Welding Bosses
Threaded
EEMUA 146
Caps
Socket Weld/Capillary/Threaded
EEMUA 146
Adaptors
Butt Weld/Male or Female
Threaded
Olets
Sockolet/Threadolet/Weldolet
EEMUA 146
Press Fittings
Elbows 45
130
Elbows 90
Reducer
Tee
Coupling
30.11.2007
10:29 Uhr
Seite 131
Brazing Fittings
Elbows
Nonferrous
Elbows
Size
DN
inch
1/8
1/4
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
mm
OD
mm
A
mm
B
mm
C
mm
L
mm
N
mm
Theoretical
Weight
kg per piece
4
6
8
10
12
16
20
25
32
40
50
8
10
12
14
16
20
25
30
38
44.5
57
15
15
17
22
22
27
32
37
45
52
65
9
9
9
10
10
10
10
11
15
15
15
6
8
10
12
14
18
22
27
35
41.5
54
24
24
26
32
32
37
42
48
60
67
80
16.5
16.5
17.5
21
21
23.5
26
29.5
36.5
41
47.5
0,035
0,040
0,045
0,054
0,090
0,130
0,185
0,260
0,370
0,520
0,870
Female capillary
Material:
CuNi90/10
Size
DN
inch
mm
OD
mm
A
mm
B
mm
C
mm
~R
mm
t
mm
s
mm
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
12
16
20
25
32
40
50
65
16
20
25
30
38
44,5
57
76
22
27
32
37
45
52
65
84
10
10
10
11
15
15
15
20
14
18
22
27
35
41,5
54
72
22
27,5
33,5
45
51
72
95
37
39
46,5
63
69
90
120
1
1
1,5
1,5
1,5
1,5
1,5
2
131
30.11.2007
10:29 Uhr
Seite 132
Brazing Fittings
Tees - equal
Tees, equal
Size
DN
inch
1/8
1/4
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
132
mm
OD
mm
A
mm
C
mm
B
mm
L
mm
N
mm
Theoretical
Weight
kg per piece
4
6
8
10
12
16
20
25
32
40
50
8
10
12
14
16
20
25
30
38
44.5
57
15
15
17
22
22
27
32
37
45
52
65
6
8
10
12
14
18
22
27
35
41.5
54
9
9
9
10
10
10
10
11
15
15
15
33
33
35
42
42
47
52
57
73
82
95
16.5
16.5
17.5
21
21
23.5
26
28.5
36.5
41
47.5
0,020
0,030
0,040
0,060
0,080
0,120
0,190
0,250
0,470
0,570
0,860
30.11.2007
10:29 Uhr
Seite 133
Brazing Fittings
Tees - reduced
Nonferrous
Tees, reducing
Size
DN
inch
1/8
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1
1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
inch
1/8
1/8
1/8
1/4
1/4
3/8
3/8
1/2
3/8
1/2
3/4
3/8
1/2
3/4
1
3/8
1/2
3/4
1
1 1/4
1/2
3/4
1
1 1/4
1 1/2
mm
mm
OD1
mm
6
8
8
10
10
12
12
16
16
20
20
25
25
25
32
32
32
32
40
40
40
40
40
50
50
50
50
50
4
4
6
4
6
6
8
8
12
12
16
12
16
20
12
16
20
25
12
16
20
25
32
16
20
25
32
40
10
12
12
14
14
16
16
20
20
25
25
30
30
30
38
38
38
38
44.5
44.5
44.5
44.5
44.5
57
57
57
57
57
OD2
mm
A1
mm
A2
mm
C1
mm
C2
mm
B1
mm
B2
mm
N
mm
L
mm
Theoretical
Weight
kg per piece
8
8
10
8
10
10
12
12
16
16
20
16
20
25
16
20
25
30
16
20
25
30
38
20
25
30
38
44.5
15
17
17
22
22
22
22
27
27
32
32
37
37
37
45
45
45
45
52
52
52
52
52
65
65
65
65
65
15
12
15
12
15
15
17
17
22
22
27
22
27
32
22
27
32
37
22
27
32
37
45
27
32
37
45
52
8
10
10
12
12
14
14
18
18
22
22
27
27
27
35
35
35
35
41.5
41.5
41.5
41.5
41.5
54
54
54
54
54
6
6
8
6
8
8
10
10
14
14
18
14
18
22
14
18
22
27
14
18
22
27
35
18
22
27
35
41.5
9
9
9
10
10
10
10
10
10
10
10
11
11
11
15
15
15
15
15
15
15
15
15
15
15
15
15
15
9
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
11
10
10
10
11
15
10
10
11
15
15
16.5
17.5
17.5
21
21
21
21
23.5
23.5
26
26
28.5
28.5
28.5
36.5
36.5
36.5
36.5
41
41
41
41
41
47.5
47.5
47.5
47.5
47.5
33
35
35
42
42
42
42
47
47
52
52
57
57
57
73
73
73
73
82
82
82
82
82
95
95
95
95
95
0,06
0,07
0,07
0,08
0,08
0,09
0,10
0,12
0,12
0,15
0,16
0,20
0,25
0,30
0,40
0,43
0,43
0,43
0,51
0,53
0,54
0,57
0,59
0,64
0,65
0,68
0,69
0,71
133
30.11.2007
10:29 Uhr
Seite 134
Brazing Fittings
Straight couplings - equal
Couplings, straight
Size
DN
inch
1/8
1/4
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
134
mm
OD
mm
A
mm
C
mm
L
mm
B
mm
Theoretical
Weight
kg per piece
4
6
8
10
12
16
20
25
32
40
50
8
10
12
14
16
20
25
30
38
44,5
57
12
15
17
20
22
27
32
37
45
52
65
6
8
10
12
14
18
22
27
35
41,5
54
20
20
20
12
22
22
22
24
32
33
33
9
9
9
10
10
10
10
11
15
15
15
0,010
0,015
0,020
0,025
0,030
0,045
0,055
0,070
0,120
0,170
0,220
30.11.2007
10:29 Uhr
Seite 135
Brazing Fittings
Straight couplings - reduced
Couplings, reduced
Nonferrous
1/4
x 1/8
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1
1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
2
2
x 1/8
x 1/8
x 1/4
x 1/4
x 3/8
x 3/8
x 1/2
x 3/8
x 1/2
x 3/4
x 3/8
x 1/2
x 3/4
x1
x 3/8
x 1/2
x 3/4
x1
x 1 1/4
x 3/8
x 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
10
12
12
14
14
16
16
20
20
25
25
30
30
30
38
38
38
38
44,5
44,5
44.5
44.5
44.5
57
57
57
57
57
57
x8
x8
x 10
x8
x 10
x 10
x 12
x 12
x 16
x 16
x 20
x 16
x 20
x 25
x 16
x 20
x 25
x 30
x 16
x 20
x 25
x 30
x 38
x 16
x 20
x 25
x 30
x 38
x 44.5
A1
mm
A2
mm
C1
mm
C2
mm
B1
mm
B2
mm
L
mm
Theoretical
Weight
kg per pc.
15
17
17
20
20
22
22
27
27
32
32
37
37
37
45
45
45
45
52
52
52
52
52
65
65
65
65
65
65
12
12
15
12
15
15
17
17
22
22
27
22
27
32
22
27
32
37
22
27
32
37
45
22
27
32
37
45
52
8
10
10
12
12
14
14
18
18
22
22
27
27
27
35
35
35
35
41.5
41.5
41.5
41.5
41.5
54
54
54
54
54
54
6
6
8
6
8
8
10
10
14
14
18
14
18
22
14
18
22
27
14
18
22
27
35
14
18
22
27
35
41.5
9
9
9
10
10
10
10
10
10
10
10
11
11
11
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
9
9
9
9
9
9
9
9
10
10
10
10
10
10
10
10
10
11
10
10
10
11
15
10
10
10
11
15
15
22
25
21
30
26
28
27
33
27
33
27
35
31
28
45
41
36
33
51
47
42
39
36
62
58
54
50
47
41
0,042
0,046
0,048
0,056
0,054
0,062
0,058
0,068
0,065
0,069
0,090
0,100
0,098
0,180
0,162
0,153
0,122
0,205
0,204
0,202
0,179
0,242
0,232
0,280
0,287
0,291
0,310
0,275
0,280
135
30.11.2007
10:29 Uhr
Seite 136
Brazing Fittings
Straight female connectors
Straight female connectors
1/8
1/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
136
x 3/8
x 1/2
x 3/4
x 1/2
x 3/4
x 1/2
x 3/4
x1
x 3/8
x 1/2
x 3/4
x1
x 1/2
x 3/4
x1
x 1 1/4
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x1
x 1 1/4
x 1 1/2
x2
x 1 1/4
x 1 1/2
x2
x 2 1/2
8
10
10
12
12
14
14
14
16
16
16
16
20
20
20
20
25
25
25
25
30
30
30
30
38
38
38
38
44,5
44,5
44,5
44,5
57
57
57
57
x 3/8
x 1/2
x 3/4
x 1/2
x 3/4
x 1/2
x 3/4
x1
x 3/8
x 1/2
x 3/4
x1
x 1/2
x 3/4
x1
x 1 1/4
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x1
x 1 1/4
x 1 1/2
x2
x 1 1/4
x 1 1/2
x2
x 2 1/2
E
(Thread)
NPT
3/8
1/2
3/4
1/2
3/4
1/2
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1 1/4
3/4
1
1 1/4
1 1/2
3/4
1
1 1/4
1 1/2
3/4
1
1 1/4
1 1/2
1
1 1/4
1 1/2
2
1 1/4
1 1/2
2
2 1/2
d2
L1
L2
SW
mm
mm
mm
mm
mm
mm
mm
12
15
15
17
17
20
20
20
22
22
22
22
27
27
27
27
32
32
32
32
37
37
37
37
45
45
45
45
52
52
52
52
65
65
65
65
9
9
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
15
15
15
15
15
15
15
15
15
15
15
15
6
8
8
10
10
12
12
12
14
14
14
14
18
18
18
18
22
22
22
22
27
27
27
27
35
35
35
35
41,5
41,5
41,5
41,5
54
54
54
54
21,5
27
32
27
32
27
32
40
21,5
27
32
40
27
32
40
49
32
40
49
55
32
40
49
55
32
40
49
55
40
49
55
70
49
55
70
85
29
32
34
32
33
32
34
38
28
31
33
38
28
32
37
40
31
35
39
41
31
35
38
40
39
39
40
42
43
39
40
43
45
40
40
49
11
14
14
14
14
14
14
17
11
14
14
17
14
14
17
18
14
17
18
18
14
17
18
18
14
17
18
18
17
18
18
18
18
18
18
24
22
27
32
27
32
27
32
41
22
27
32
41
27
32
41
50
32
41
50
55
41
41
50
55
46
46
50
55
55
55
55
70
65
65
70
85
30.11.2007
10:29 Uhr
Seite 137
Brazing Fittings
Straight male connectors
Straight male connectors
Nonferrous
1/8
1/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
1
1
1
1
1 1/4
1 1/4
1 1/4
1 1/4
1 1/2
1 1/2
1 1/2
1 1/2
2
2
2
2
x 3/8
x 1/2
x 3/4
x 1/2
x 3/4
x 1/2
x 3/4
x1
x 3/8
x 1/2
x 3/4
x1
x 1/2
x 3/4
x1
x 1 1/4
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x1
x 1 1/4
x 1 1/2
x2
x 1 1/4
x 1 1/2
x2
x 2 1/2
8
10
10
12
12
14
14
14
16
16
16
16
20
20
20
20
25
25
25
25
30
30
30
30
38
38
38
38
44,5
44,5
44,5
44,5
57
57
57
57
x 3/8
x 1/2
x 3/4
x 1/2
x 3/4
x 1/2
x 3/4
x1
x 3/8
x 1/2
x 3/4
x1
x 1/2
x 3/4
x1
x 1 1/4
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x 3/4
x1
x 1 1/4
x 1 1/2
x1
x 1 1/4
x 1 1/2
x2
x 1 1/4
x 1 1/2
x2
x 2 1/2
E
(Thread)
NPT
3/8
1/2
3/4
1/2
3/4
1/2
3/4
1
3/8
1/2
3/4
1
1/2
3/4
1
1 1/4
3/4
1
1 1/4
1 1/2
3/4
1
1 1/4
1 1/2
3/4
1
1 1/4
1 1/2
1
1 1/4
1 1/2
2
1 1/4
1 1/2
2
2 1/2
L1
L2
SW
mm
mm
mm
mm
mm
mm
12
15
15
17
17
20
20
20
22
22
22
22
27
27
27
27
32
32
32
32
37
37
37
37
45
45
45
45
52
52
52
52
65
65
65
65
9
9
9
9
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
15
15
15
15
15
15
15
15
15
15
15
15
6
8
8
10
10
10
12
12
8
10
14
14
10
14
18
18
14
22
22
22
14
22
27
27
14
22
27
35
22
27
35
41
27
35
48
54
26
30
33
30
33
30
33
38
29
30
33
38
33
34
39
43
35
39
43
44
38
41
44
45
44
44
45
46
47
48
48
51
51
51
51
60
15
18
18
18
18
18
18
21
15
18
18
21
18
18
21
22
18
21
22
22
18
21
22
22
18
21
22
22
21
22
22
22
22
22
22
28
19
22
30
22
30
22
30
36
22
22
30
36
27
30
36
46
32
36
46
50
41
41
46
50
46
46
46
50
55
55
55
65
65
65
65
75
137
30.11.2007
10:29 Uhr
Seite 138
Unions
Male- and female unions
Unions
1/8
1/4
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
8
10
12
14
16
20
25
30
38
44,5
57
~L1
~L
SW
SW1
mm
mm
mm
mm
mm
mm
12
15
17
20
22
27
32
37
45
52
65
6
8
10
12
14
18
22
27
35
41,5
54
19
23
23
30
31
36
38,5
39,5
42
46
51
37
41
41
50
51
56
58,5
61,5
72
76
81
22
27
27
32
36
41
46
50
60
70
85
~L
~L1
SW1
SW2
mm
mm
mm
mm
mm
6
8
10
14
18
22
27
45
47
47
51
57
64
71
4
4
3
3
3
3
3
17
17
19
24
27
36
41
17
19
22
27
32
41
46
13
17
19
22
24
27
32
36
46
55
65
Unions
with double wedge ring
PN up to 25
Material:
CuNi90/10
1/8
1/4
3/8
1/2
3/4
1
138
8
10
12
16
20
25
30
30.11.2007
10:29 Uhr
Seite 139
Unions
Male- and female unions
Male unions
Nonferrous
1/8
1/4
1/4
3/8
1/2
3/4
1
1 1/4
1 1/2
2
8
10
12
14
16
20
25
30
38
44,5
57
x 1/4
x 3/8
x 1/2
x 5/8
x 3/4
x1
x1
x 1 1/4
x 1 1/2
x 1 3/4
x 2 1/2
A
mm
12
15
17
20
22
27
32
37
45
52
65
C
mm(
6
8
10
12
14
18
22
27
35
41
54
d1
~L
~L1
~L2
SW1
SW2
Thread) G
mm
mm
mm
mm
mm
40
40
43
49
50
56
57
63
71
76
87
12
12
14
14
16
18
18
20
22
24
30
30
32
34
39
40
46
47
52
56
61
72
22
27
27
32
36
41
46
50
60
70
85
19
22
27
32
32
41
41
50
55
65
85
G 1/4
G 3/8
G 1/2
G 5/8
G 3/4
G1
G1
G 1 1/4
G 1 1/2
G 1 3/4
G 2 1/2
139
30.11.2007
10:29 Uhr
Seite 140
Unions
Male- and female unions
Male unions, reduced
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
140
8
x 1/8
8
x 3/8
8
x 1/2
10 x 1/4
10 x 1/2
10 x 5/8
12 x 1/4
12 x 3/8
12 x 5/8
12 x 3/4
14 x 3/8
14 x 1/2
14 x 3/4
14 x 1
16 x 1/2
16 x 5/8
16 x 1 3/4
16 x 1 1/4
20 x 5/8
20 x 3/4
20 x 1 1/4
20 x 1 1/2
25 x 5/8
25 x 3/4
25 x 1 1/4
25 x 1 1/2
d1
~L
~L1
~L2
SW1
SW2
mm
mm
(Thread) G
mm
mm
mm
mm
mm
12
12
12
15
15
15
17
17
17
17
20
20
20
20
22
22
22
22
27
27
27
27
32
32
32
32
4
6
6
6
8
8
6
8
10
10
12
12
12
12
10
12
14
14
12
14
18
18
12
14
22
22
G 1/8
G 3/8
G 1/2
G 1/4
G 1/2
G 5/8
G 1/4
G 3/8
G 5/8
G 3/4
G 3/8
G 1/2
G 3/4
G1
G 1/2
G 5/8
G1
G 1 1/4
G 5/8
G 3/4
G 1 1/4
G 1 1/2
G 5/8
G 3/4
G 1 1/4
G 1 1/2
39
40
42
40
43
45
41
41
45
45
47
47
49
52
50
50
53
56
54
54
59
61
56
56
60
62
8
12
14
12
14
14
12
12
14
16
12
14
16
18
14
14
18
20
14
16
20
22
14
16
20
22
30
30
33
32
34
36
32
32
36
36
36
37
39
42
40
40
43
46
44
44
49
51
46
46
50
52
22
22
22
27
27
27
27
27
27
27
32
32
32
32
36
36
36
36
41
41
41
41
46
46
46
46
17
22
27
22
27
32
24
24
32
32
27
27
32
41
32
32
41
50
36
36
50
55
41
41
50
55
30.11.2007
10:29 Uhr
Seite 141
Unions
Male- and female unions
30
30
30
30
38
38
38
38
44,5
44,5
44,5
44,5
57
57
57
57
x 3/4
x1
x 1 1/2
x 1 3/4
x 3/4
x1
x 1 1/4
x 1 3/4
x1
x 1 1/4
x 1 1/2
x2
x 1 1/4
x 1 1/2
x 1 3/4
x2
Nonferrous
d1
~L
~L1
~L2
SW1
SW2
mm
mm
(Thread) G
mm
mm
mm
mm
mm
37
37
37
37
45
45
45
45
52
52
52
52
65
65
65
65
14
22
27
27
14
22
27
35
22
27
35
41
27
35
41
48
G 3/4
G1
G 1 1/2
G 1 3/4
G 3/4
G1
G 1 1/4
G 1 3/4
G1
G 1 1/4
G 1 1/2
G2
G1?
G 11/2
G 13/4
G2
61
62
65
68
70
71
71
74
74
74
74
77
83
83
83
83
16
18
22
24
16
18
20
24
18
20
22
24
20
22
24
24
50
51
54
57
55
56
56
59
59
59
59
62
69
69
69
69
50
50
50
50
60
60
60
60
70
70
70
70
85
85
85
85
46
46
55
65
55
55
55
65
60
60
60
70
80
80
80
80
141
30.11.2007
10:30 Uhr
Seite 142
142
30.11.2007
10:30 Uhr
Seite 143
Fittings
Dimensional Tolerances and Welding Ends
MSS SP-43
Outside
Diameter
at Welding
End
1/2 to 11/2
Wall
Thickness
0.76
90 Elbows
45 Elbows
Tees
Reducers
Lap Joint
Stub Ends
Center-to
End
Dimension
ABCM
Overall
Length FH
1.52
1.52
Caps
180 Returns
Center-to
Centre
Dimension
P
Back-toAlignment Over
Face
of End
Length
Dimension
K
U
E
6.35
6.35
0.76
3.05
Lap-Joint
Stub Ends
Fillet
Radius
of Lap
A
+0
Outside
Diameter
of Lap
G
+0
-0.76
-0.76
+0
2 to 3 1/2
0.76
1.52
1.52
6.35
6.35
0.76
3.05
+0
-0.76
-0.76
0.76
1.52
1.52
6.35
6.35
0.76
3.05
+0
+0
-1.52
-0.76
5 to 8
+1.52
1.52
1.52
6.35
6.35
0.76
6.35
+0
+0
-1.52
-0.76
2.29
2.29
9.65
6.35
1.52
6.35
-0.76
10 to 18
thickness
+2.29
-0.76
20 to 24
+3.05
2.29
2.29
9.65
6.35
1.52
6.35
-0.76
+0
+0
-1.52
-1.52
+0
+0
-1.52
-1.52
ANSI B16-9
90
and
45
Elbows and
Tees
All Fittings
Nominal
Pipe Size
Center-to
Outside
Inside
Wall
Diameter Diameter Thickness End
Dimension
ABCM
at Bevel at End
1/2 to 21/2+1.52
0.76
1.52
Reducers
and
Caps
Lap Joint
Stub Ends
Overall
Length
FH
1.52
Overall Center-to
Length Centre
Dimension
P
E
3.05
Lap-Joint Stub
Ends
180 Returns
6.35
Back-toAlignment
Face
of End
Dimension
K
U
6.35
0.76
-0.76
Outside Thickness
Diameter of Lap
of Lap
G
T
Fillet
Radius of
Lap
R
+0
+1.52
-0.76
-0
+0
-0.76
+1.52
+0
3 to 3 1/2 1.52
1.52
1.52
1.52
3.05
6.35
6.35
0.76
+0
-0.76
-0
-0.76
+1.52
1.52
1.52
1.52
3.05
6.35
6.35
0.76
+0
+1.52
+0
-0.76
-0
-1.52
5 to 8
+2.29
1.52
1.52
1.52
6.35
6.35
6.35
0.76
+0
+1.52
+0
-0.76
-0
-1.52
+0
+1.52
+0
-1.52
-0
-1.52
Not less
-1.52
10 to 18
than
+4.06
3.05
-3.05
20 to 24
87.5% of
2.29
2.29
6.35
9.65
6.35
nominal
+6.35
4.83
thickness
2.29
2.29
6.35
9.65
6.35
-4.83
26 to 30
1.52
+6.35
4.83
3.05
4.83
9.65
4.83
4.83
4.83
9.65
1.52
+0
+1.52
+0
-1.52
-0
-1.52
-4.83
32 to 48
+6.35
-4.83
37 1/2 2 1/2
BEVEL
ANSI B16-9
0.06 (1.59mm)
0.03 (0.79mm)
T
0.12 (3mm) T 0.88 (22mm)
T
T = 0.12 (3mm)
143
All Fittings
Nominal
Pipe
Size
30.11.2007
10:30 Uhr
Seite 144
O.D.
Nominal
Pipe
Dia.
Size
(OD)
1/2
21.34
1.65
2.11
2.77
3.73
3/4
26.67
1.65
2.11
2.87
3.91
STD
XS
90
Centre
Nominal
to End
Pipe
STD
XS
Size
Sch. 5S
Sch. 80S
38.10
1/2
0.049
0.061
0.078
0.100
28.45
3/4
0.062
0.078
0.103
0.104
33.4
1.65
2.77
3.38
4.55
38.10
0.078
0.128
0.154
0.204
1 1/4
42.16
1.65
2.77
3.56
4.85
47.75
1 1/4
0.125
0.206
0.260
0.349
1 1/2
48.26
1.65
2.77
3.68
5.08
5.15
1 1/2
0.170
0.283
0.368
0.507
60.32
1.65
2.77
3.91
5.54
76.20
0.286
0.478
0.652
0.938
2 1/2
73.02
2.11
3.05
5.16
7.01
95.25
2 1/2
0.576
0.812
1.37
1.79
88.90
2.11
3.05
5.49
7.62
114.3
0.810
1.140
2.04
2.87
3 1/2
10.60
2.11
3.05
5.74
8.08
133.35
3 1/2
1.08
1.53
2.82
4.10
114.30
2.11
3.05
6.02
8.56
152.4
1.39
1.97
3.84
5.62
141.30
2.77
3.40
6.55
9.53
190.50
2.83
3.42
6.48
9.69
168.27
2.77
3.40
7.11
10.97
228.60
4.06
4.87
9.94
15.99
219.08
2.77
3.796
8.18
12.7
304.80
7.06
10.00
20.10
32.16
10
273.05
3.40
4.19
9.27
12.70
381.00
10
13.20
15.50
35.40
49.83
12
323.85
3.96
4.57
9.53
12.70
457.20
12
22.30
25.90
56.20
72.48
14
355.60
4.78
7.92
9.53
12.70
533.40
14
34.60
57.58
66.36
85.53
16
406.40
4.78
7.92
9.53
12.70
609.60
16
45.20
70.03
87.11
112.34
18
457.20
4.78
7.92
9.53
12.70
685.80
18
57.30
89.01
110.67
142.79
20
508.00
5.54
9.53
9.53
12.70
762.00
20
82.00
136.99
136.99
176.90
22
558.80
5.54
9.53
9.53
12.70
838.20
22
99.40
163.03
163.03
210.83
24
609.60
6.35
9.53
9.53
12.70
914.40
24
136.00
198.05
198.05
256.13
26
660.40
7.92
12.70
9.53
12.70
990.60
26
198.00
296.76
229.17
296.53
28
711.20
7.92
12.70
9.53
12.70
1066.80
28
230.00
345.05
266.50
344.96
30
762.00
7.92
12.70
9.53
12.70
1143.00
30
264.00
397.15
306.59
396.74
32
812.80
7.92
12.70
9.53
12.70
1219.20
32
301.00
453.00
349.53
452.68
34
863.60
7.92
12.70
9.53
12.70
1295.40
34
339.00
512.16
395.24
511.98
36
914.40
7.92
12.70
9.53
12.70
1371.60
36
381.00
575.13
443.71
574.95
38
965.20
7.92
9.53
12.70
1447.80
38
425.00
497.71
644.75
40
1016.00 7.92
9.53
12.70
1524.00
40
471.00
551.98
715.51
42
1066.80 7.92
9.53
12.0
1600.20
42
520.00
606.16
785.77
44
1117.60
7.92
9.53
12.70
1676.40
571.00
669.04
867.40
46
1168.40 7.92
9.53
12.70
1752.60
46
624.00
7.31.69
948.81
48
1219.20 7.92
9.53
12.70
1828.80
48
679.00
797.28
1033.84
144
30.11.2007
10:30 Uhr
Seite 145
O.D.
45
Nominal
Pipe
Size
Centre
STD
XS
to End
Sch. 40S Sch. 80 S (A)
Nominal
Pipe
Size
STD
Sch. 5S
XS
Sch. 10S Sch. 40S
Sch. 80S
1/2
21.34
1.65
2.11
2.77
3.73
15.88
1/2
0.024
0.030
0.039
0.050
3/4
26.67
1.65
2.11
2.87
3.91
11.13
3/4
0.031
0.039
0.052
0.078
33.40
1.65
2.77
3.38
4.55
22.22
0.039
0.064
0.077
0.100
1 1/4
42.16
1.65
2.77
3.56
4.85
25.40
1 1/4
0.063
0.103
0.130
0.177
1 1/2
48.26
1.65
2.77
3.68
5.08
28.45
1 1/2
0.085
0.142
0.184
0.254
60.32
1.65
2.77
3.91
5.54
35.05
0.143
0.239
0.326
0.471
2 1/2
73.02
2.11
3.05
5.16
7.01
44.45
2 1/2
0.288
0.406
0.683
0.897
88.90
2.11
3.05
5.49
7.62
50.80
0.405
0.571
1.02
1.44
3 1/2
101.60
2.11
3.05
5.74
8.08
57.15
3 1/2
0.540
0.764
1.41
2.05
114.30
2.11
3.05
6.02
8.56
63.50
0.696
0.985
1.92
2.81
141.30
2.77
3.40
6.55
9.53
79.25
1.42
1.71
3.24
4.85
168.27
2.77
3.40
7.11
10.97
95.25
2.01
2.43
4.97
8.02
219.08
2.77
3.76
8.18
12.70
127.00
3.53
5.01
10.10
16.22
10
273.05
3.40
4.19
9.27
12.70
158.75
10
6.62
7.77
17.70
25.37
12
323.85
3.96
4.57
9.53
12.70
190.50
12
11.10
12.50
28.10
36.69
14
355.60
4.78
7.92
9.53
12.70
222.25
14
17.30
28.63
32.93
42.40
16
406.40
4.78
7.92
9.53
12.70
254.00
16
22.60
34.84
43.31
55.76
18
457.20
4.78
7.92
9.53
12.70
285.75
18
28.70
44.21
54.99
70.94
20
508.00
5.54
9.53
9.53
12.70
317.50
20
41.00
68.13
68.13
88.02
22
558.80
5.54
9.53
9.53
12.70
342.90
22
49.70
81.13
81.13
104.87
24
609.60
6.35
9.53
9.53
12.70
381.00
24
68.00
98.57
98.57
127.52
26
660.40
7.92
12.70
9.53
12.70
406.40
26
99.00
147.63
114.11
147.68
28
711.20
7.92
12.70
9.53
12.70
438.15
28
115.00
171.82
132.73
171.82
30
762.00
7.92
12.70
9.53
12.70
469.90
30
132.00
197.78
152.75
197.78
32
812.80
7.92
12.70
9.53
12.70
501.65
32
151.00
225.59
156.24
225.59
34
863.60
7.92
12.70
9.53
12.70
533.40
34
170.00
255.22
196.96
255.13
36
914.40
7.92
12.70
9.53
12.70
565.15
36
191.00
286.66
221.20
286.57
38
965.20
7.92
9.53
12.70
599.95
38
213.00
248.15
321.58
40
1016.00 7.92
9.53
12.70
631.95
40
236.00
257.35
356.69
42
1066.80 7.92
9.53
12.70
660.40
42
260.00
301.34
391.85
44
1117.60
7.92
9.53
12.70
695.45
44
286.00
333.68
432.66
46
1168.40 7.92
9.53
12.70
726.95
46
312.00
365.07
473.25
48
1219.20 7.92
9.53
12.70
758.95
48
340.00
397.69
515.74
145
30.11.2007
10:30 Uhr
Seite 146
O.D.
90
Nominal
Pipe
Dia.
Centre
Nominal
to End
Size
(OD)
Pipe
STD
XS
Size
Sch. 5S
Sch. 80S
33,40
1,65
2,77
3,38
4,55
25,40
0,077
0,094
0,118
0,122
1 1/4
42,16
1,65
2,77
3,56
4,85
31,75
1 1/4
0,101
1 1/2
48,26
1,65
2,77
3,68
5,08
38,10
1 1/2
0,114
0,152
0,204
0,217
0,189
0,245
0,317
60,32
1,65
2,77
3,91
5,54
50,80
0,191
0,318
0,434
0,593
2 1/2
73,02
2,11
3,05
5,16
7,01
63,50
2 1/2
0,383
0,541
0,909
1,13
88,90
2,11
3,05
5,49
7,62
76,20
0,540
0,761
1,36
1,82
3 1/2
101,60
2,11
3,05
5,74
8,08
114,30
2,11
3,05
6,02
8,56
88,90
3 1/2
0,719
1,02
1,88
2,61
101,60
0,928
1,31
2,56
3,56
141,30
2,77
3,40
6,55
9,53
27,00
1,89
2,28
4,32
6,20
168,27
2,77
3,40
7,11
10,97
152,40
2,68
3,24
6,63
10,26
219,08
2,77
3,76
8,18
12,70
203,20
4,71
6,68
12,40
20,84
10
273,05
3,40
4,19
9,27
12,70
254,00
10
8,83
10,40
23,60
32,94
12
323,85
3,96
4,57
9,53
12,70
304,80
12
14,80
16,70
37,50
47,30
14
355,60
3,96
4,78
9,53
12,70
355,60
14
15,21
24,55
48,33
59,25
16
406,40
3,96
4,78
9,53
12,70
406,40
16
25,60
32,00
63,37
81,81
18
457,20
3,96
4,78
9,53
12,70
457,20
18
40,40
40,40
73,57
103,96
20
508,00
4,78
5,54
9,53
12,70
508,00
20
40,42
60,25
99,66
128,79
22
558,80
4,78
5,54
9,53
12,70
558,80
22
61,06
73,02
120,83
156,29
24
609,60
5,54
6,35
9,53
12,70
609,60
24
86,98
101,56
144,06
186,41
STD
XS
146
10.12.2007
11:20 Uhr
Seite 147
M
T
O.D.
C
Nominal
Pipe
Dia.
Size
(OD)
1/2
21,34
1,65
2,11
2,77
3,73
3/4
26,67
1,65
2,11
2,87
3,91
STD
XS
Centre
Nominal
to End
Pipe
STD
XS
Size
Sch. 5S
Sch.
25,40
1/2
0,090
0,090
0,181
0,204
28,70
3/4
0,129
0,128
0,258
0,294
80S
33,40
1,65
2,77
3,38
4,55
38,10
0,223
0,223
0,256
0,399
1 1/4
42,16
1,65
2,77
3,56
4,85
47,75
1 1/4
0,356
0,356
0,463
0,725
1 1/2
48,26
1,65
2,77
3,68
5,08
57,15
1 1/2
0,497
0,497
0,648
1,02
60,32
1,65
2,77
3,91
5,54
63,50
0,681
0,681
0,893
1,81
2 1/2
73,02
2,11
3,05
5,16
7,01
76,20
2 1/2
1,20
1,20
1,98
3,17
88,90
2,11
3,05
5,49
7,62
85,85
1,57
1,57
2,61
3,85
114,30
2,11
3,05
6,02
8,56
104,90
2,46
2,46
4,76
7,11
141,30
2,77
3,40
6,55
9,53
123,95
4,04
4,04
7,84
11,78
168,27
2,77
3,40
7,11
10,97
143,00
5,50
5,50
9,54
18,12
219,08
2,77
3,76
8,18
12,70
177,80
11,07
11,07
19,56
33,98
10
273,05
3,40
4,19
9,27
12,70
215,90
10
19,87
19,87
32,61
47,57
12
323,85
3,96
4,57
9,53
12,70
254,00
12
27,86
27,86
56,65
72,48
14
355,60
3,96
4,78
9,53
12,70
279,40
14
28,74
35,98
71,21
91,78
16
406,40
3,96
4,78
9,53
12,70
304,80
16
35,69
44,69
88,56
114,23
18
457,20
3,96
4,78
9,53
12,70
342,90
18
45,21
56,62
112,33
144,98
20
508,00
4,78
5,54
9,53
12,70
381,00
20
69,97
83,69
138,99
179,66
22
558,80
4,78
5,54
9,53
12,70
419,10
22
84,72
101,35
170,07
217,46
24
609,60
5,54
6,35
9,53
12,70
431,80
24
113,23
132,24
192,66
243,13
147
30.11.2007
10:30 Uhr
Seite 148
Reducing Tee
O.D.2
T2
M
T1
O.D.1
C
Nom.
Pipe
Size Out
Run let
OutSide
Dia.
OD1
OutSide
Dia.
OD2
3/4
1/2
26,67
21,34
1/2
33,40
21,34
3/4
33,40
1 1/4
3/4
1 1/4
1 1/2
1 1/2
Nominal
Pipe Size
OutRun let
Center
Center
STD
Sch. 40S
T1 T2
XS
Sch. 80S
T1
T2
to
End
C
to
End
M
2,87 2,77
3,91
28,70 28,70
3/4
1/2
3,38 2,77
4,55 3,73
38,10
38,10
1/2
26,67
3,38 2,87
4,55 3,91
38,10
38,10
3/4
42,16
26,67
9,56 2,87
4,85 3,91
47,75
47,75
1 1/4 3/4
42,16
33,40
3,56 3,38
4,85 4,55
47,75
47,75
1 1/4 1
1/2
48,26
21,34
3,68 2,77
5,08 3,73
57,15
57,15
1 1/2 1/2
3/4
48,26
26,67
3,68 2,87
5,08 3,91
57,15
57,15
1 1/2 3/4
1 1/2
48,26
33,40
3,68 3,38
5,08 4,55
57,15
57,15
1 1/2 1
1 1/2
1 1/4 48,26
42,16
3,68 3,56
5,08 4,85
57,15
57,15
3/4
60,32
26,67
3,91 2,87
5,54 3,91
63,50 44,45
60,32
33,40
3,91 3,38
5,54 4,55
63,50 50,80
1 1/4 60,32
42,16
3,91 3,56
5,54 4,85
63,50 57,15
1 1/2 60,32
48,26
3,91 3,68
5,54 5,08
63,50 60,45
2 1/2
1 1/2 73,02
48,26
5,16 3,68
7,01
5,08
76,20
66,80
2,08
2,61
2 1/2
73,02
60,32
5,16 3,91
7,01
5,54
76,20
69,85
2 1/2 2
2,12
2,66
1 1/2 88,90
48,26
5,49 3,68
7,62
5,08
79,50 73,15
2,98
3,84
Sch. 10S
T1 T2
3,73
Sch.
5S
STD XS
Sch. Sch. Sch.
10S 40S 80S
3/4
1,46
1,51
1,57
0,838 1,21
1 1/2 1,33
1,60
1,44
88,90
60,32
5,49 3,91
7,62
5,54
85,85 76,20
1,42
1,63
3,01
3,86
2 1/2 88,90
73,02
2,11 2,11
3,05 3,05
5,49 5,16
7,62
7,01
85,85 82,55
2 1/2 1,58
1,69
3,15
3,97
6,02 3,68
8,56 5,08
104,90 85,85
1 1/2 2,45
2,51
5,04
6,63
6,02 3,91
8,56 5,54
104,90 88,90
2,47
2,53
5,08
6,70
2,11 2,11
3,05 3,05
6,02 5,16
8,56 7,01
104,90 95,25
2 1/2 2,52
2,59
5,22
6,79
114,30 88,90
2,11 2,11
3,05 3,05
6,02 5,49
8,56 7,62
104,90 98,55
2,55
2,61
5,27
6,93
141,30 88,90
2,77 2,11
3,40 3,05
6,55 5,49
9,53 7,62
123,95 111,25
3,38
4,17
8,13
10,95
3,40 3,05
6,55 6,02
9,53 8,56
123,95 117,60
3,43
4,24
8,36
11,18
2,77 2,11
3,40 3,05
7,11
5,16
10,97 7,01
143,00 120,65 6
2 1/2 4,62
5,69
11,87 17,05
168,27 88,90
2,77 2,11
3,40 3,05
7,11
5,49
10,97 7,62
143,00 123,95 6
4,67
3,40 3,05
7,11
6,02
10,97 8,56
143,00 130,30 6
4,75
5,85
12,10 17,19
3,40 9,40
7,11
6,55
10,97 9,53
143,00 136,65 6
4,80
5,92
12,34 17,47
148
114,30 60,32
30.11.2007
10:30 Uhr
Seite 149
Reducing Tee
T2
M
T1
O.D.1
C
OutSide
Dia.
OD1
OutSide
Dia.
OD2
Sch.5S
T1
T2
XS
Sch.80S
T1
T2
Center
to
End
C
Center
to
End
M
Nominal
Pipe Size
OutRun let
Sch.
5S
Sch.
10S
STD
Sch.
40S
XS
Sch.
80S
219.08
114.30
2.77 2.11
3.76 3.05
8.18 6.02
12.70 8.56
177.80
155.70
7.35
9.80
21.26
30.76
219.08
141.30
2.77 2.77
3.76 3.40
8.18 6.55
12.70 9.53
177.80
162.05
7.41
9.83
21.36
30.85
219.08
168.27
2.77 2.77
3.76 3.40
8.18 7.11
12.70 10.97
177.80
168.40
7.44
9.90
21.62
31.25
10
273.05
141.30
3.40 2.77
4.19 3.40
9.27 6.55
12.70 9.53
215.90
190.50
10
13.43 16.47
36.14
47.47
10
273.05
168.27
3.40 2.77
4.19 3.40
9.27 7.11
12.70 10.97
215.90
193.80
10
13.49 16.58
36.27
47.95
48.39
10
273.05
219.08
3.40 2.77
4.19 3.76
9.27 8.18
12.70 12.70
215.90
203.20
10
13.54 16.69
36.85
12
323.85
168.27
3.96 2.77
4.57 3.40
9.53 7.11
12.70 10.97
254.00
219.20
12
22.93 25.10
51.96
67.43
12
10
323.85
273.05
3.96 2.64
4.57 4.19
9.53 9.27
12.70 12.70
254.00
241.30
12
10
23.13 25.48
53.72
68.81
14
355.60
219.08
4.78 3.76
7.92 6.35
9.53 8.18
12.70 12.70
279.40
247.65
14
28.79 52.00
57.88
75.22
14
10
355.60
273.05
4.78 4.09
7.92 6.35
9.53 9.27
12.70 12.70
279.40
257.30
14
10
28.96 52.37
58.34
75.89
14
12
355.60
323.85
4.78 4.57
7.92 6.35
9.53 9.53
12.70 12.70
279.40
270.00
14
12
29.14 52.73
58.81
76.57
16
10
406.40
273.05
4.78 4.19
7.92 6.35
9.53 9.27
12.70 12.70
304.80
282.70
16
10
34.26 61.89
68.88
89.51
16
12
406.40
323.85
4.78 4.57
7.92 6.35
9.53 9.53
12.70 12.70
304.80
295.40
16
12
34.47 62.32
69.43
90.32
16
14
406.40
335.60
4.78 4.78
7.92
7.92
9.53 9.53
12.70 12.70
304.80
304.80
16
14
34.67 62.76
69.98
91.12
18
12
457.20
323.85
4.78 4.57
7.92 6.35
9.53 9.53
12.70 12.70
342.90
320.80
18
12
43.37 78.33
87.17
113.28
18
14
457.20
355.60
4.78 4.78
7.92
7.92
9.53 9.53
12.70 12.70
342.90
330.20
18
14
43.62 78.88
87.87
114.30
18
16
457.20
406.40
4.78 4.78
7.92
7.92
9.53 9.53
12.70 12.70
342.90
330.20
18
16
43.89 79.43
88.57
115.33
20
14
508.00
355.60
5.54 4.78
9.53 7.92
9.53 9.53
12.70 12.70
381.00
355.60
20
14
20
16
508.00
406.40
5.54 4.78
9.53 7.92
9.53 9.53
12.70 12.70
381.00
355.60
20
16
20
18
508.00
457.20
5.54 4.78
9.53 7.92
9.53 9.53
12.70 12.70
381.00
368.30
20
18
22
16
558.80
406.40
5.54 4.78
9.53 7.92
9.53 9.53
12.70 12.70
419.10
381.00
22
16
22
18
558.80
457.20
5.54 4.78
9.53 7.92
9.53 9.53
12.70 12.70
419.10
393.70
22
18
22
20
558.80
508.00
5.54 5.54
9.53 9.53
9.53 9.53
12.70 12.70
419.10
406.40
22
20
24
16
609.60
406.40
6.35 4.78
9.53 7.92
9.53 9.53
12.70 12.70
431.80
406.40
24
16
24
18
609.60
457.20
6.35 4.78
9.53 7.92
9.53 9.53
12.70 12.70
431.80
419.10
24
18
24
20
609.60
508.00
6.35 5.54
9.53 9.53
9.53 9.53
12.70 12.70
431.80
431.80
24
20
24
22
609.60
558.80
6.35 5.54
9.53 9.53
9.53 9.53
12.70 12.70
431.80
431.80
24
22
149
O.D.2
30.11.2007
10:30 Uhr
Seite 150
O.D.2
T2
T2
T1
T1
O.D.1
O.D.1
OutSide
Dia.
OD1
OutSide
Dia.
OD2
Sch. 5S
T1
T2
Wall Thickness
STD
Sch. 10S
Sch. 40S
T1
T2
T1
T2
XS
Sch. 80S
T1
T2
Length
Nominal
Pipe
Size
Sch.
5S
Sch.
10S
STD
Sch.
40S
XS
Sch.
80S
0.159
3/4
1/2
26.67
21.34
1.65 1.65
2.11 2.11
2.87 2.77
3.91
3.73
38.10
3/4
1/2
0.054
0.090 0.105
1/2
33.40
21.34
1.65 1.65
2.77 2.11
3.38 2.77
4.55
3.73
50.80
1/2
0.060
0.089 0.105
0.163
3/4
33.40
26.67
1.65 1.65
2.77 2.11
3.38 2.87
4.55
3.91
50.80
3/4
0.060
0.098
0.116
0.168
0.157
0.245
1 1/4
42.16
33.40
1.65 1.65
2.77 2.77
3.56 3.38
4.85
4.55
50.80
1 1/4
0.066
0.125
1 1/2
1/2
48.26
21.34
1.65 1.65
2.77 2.11
3.68 2.77
5.08
3.73
63.50
1 1/2
1/2
0.091
0.154 0.204
0.276
1 1/2
3/4
48.26
26.67
1.65 1.65
2.77 2.11
3.68 2.87
5.008 3.91
63.50
1 1/2
3/4
0.095
0.156 0.201
0.294
1 1/2
0.308
48.26
33.40
1.65 1.65
2.77 2.77
3.68 3.38
5.08
4.55
63.50
1 1/2
42.16
1.65 1.65
2.77 2.77
3.68 3.56
5.08
4.85
63.50
1 1/2 1 1/4
3/4
60.32
26.67
1.65 1.65
2.77 2.11
3.91 2.87
5.54
3.91
76.20
3/4
0.103
0.170
0.118
0.195 0.263
0.219
0.331
0.121
0.214 0.298
0.458
0.458
60.32
33.40
1.65 1.65
2.77 2.77
3.91 3.38
5.54
4.55
76.20
0.143
0.237 0.322
1 1/4 60.32
42.16
1.65 1.65
2.77 2.77
3.91 3.56
5.54
4.85
76.20
1 1/4
0.156
0.258 0.352
0.525
1 1/2 60.32
48.26
1.65 1.65
2.77 2.77
3.91 3.68
5.54
5.08
76.20
1 1/2
0.164
0.273 0.372
0.544
0.453
0.349 0.793
0.793
0.276
0.394 0.670
0.825
2 1/2
73.02
33.40
2.11 1.65
3.05 2.77
5.16 3.38
7.01
4.55
88.90
2 1/2
42.16
2.11 1.65
3.05 2.77
5.16 3.56
7.01
4.85
88.90
2 1/2 1 1/4
48.26
2.11 1.65
3.05 2.77
5.16 3.68
7.01
5.08
88.90
2 1/2 1 1/2
0.281
0.396 0.661
0.856
73.02
60.32
2.11 1.65
3.05 2.77
5.16 3.91
7.01
5.54
88.90
2 1/2
0.307
0.432 0.724
0.938
88.90
33.40
2.11 1.65
3.05 2.77
5.49 3.38
7.62
4.55
88.90
0.281
0.408
0.716
0.888
1 1/4 88.90
42.16
2.11 1.65
3.05 2.77
5.49 3.56
7.62
4.85
88.90
1 1/4
0.299
0.430 0.775
1.037
1 1/2 88.90
48.26
2.11 1.65
3.05 2.77
5.49 3.68
7.62
5.08
88.90
1 1/2
0.315
0.444 0.783
1.105
88.90
60.32
2.11 1.65
3.05 2.77
5.49 3.91
7.62
5.54
88.90
0.339
0.478 0.846
1.178
2 1/2 88.90
73.02
2.11 2.11
3.05 3.05
5.49 5.16
7.62
7.01
88.90
2 1/2
0.376
0.548 0.983
1.291
1 1/2 114.30
48.26
2.11 1.65
3.05 2.77
6.02 3.68
8.56
5.08
101.60
1 1/2
0.435
0.630
1.241
1.730
114.30
60.32
2.11 1.65
3.05 2.77
6.02 3.91
8.56
5.54
101.60
0.464
0.656
1.27
1.780
2 1/2 114.30
73.02
2.11 2.11
3.05 3.05
6.02 5.16
8.56
7.01
101.60
2 1/2
0.499
0.706
1.37
2.007
2.11 2.11
3.05 3.05
6.02 5.49
8.56
7.62
101.60
0.528
0.748
1.45
2.129
4
4
114.30
88.90
141.30
88.90
2.77 2.11
3.40 3.05
6.55 5.49
9.53
7.62
127.00
0.991
1.20
2.27
3.547
141.30 114.30
2.77 2.11
3.40 3.05
6.55 6.02
9.53
8.56
127.00
1.107
1.32
2.50
3.769
2 1/2 168.27
168.27
73.02
2.77 2.11
3.40 3.05
7.11
5.16
10.97 7.01
139.70
2 1/2
1.12
1.35
2.74
4.51
88.90
2.77 2.11
3.40 3.05
7.11 5.49
10.97 7.62
139.70
1.24
1.50
3.04
5.03
5.44
168.27 114.30
2.77 2.11
3.40 3.05
7.11 6.02
10.97 8.56
139.70
1.34
1.62
3.30
168.27 141.30
2.77 2.77
3.40 3.40
7.11 6.55
10.97 9.53
139.70
1.45
1.75
3.57
5.71
219.08 114.30
2.77 2.11
3.76 3.05
0.18 6.02
12.70 8.56
152.40
1.80
2.56
5.10
8.43
8
8
10
5
6
5
219.08 141.30
219.08 168.27
273.05 141.30
2.77 2.77
2.77 2.77
3.40 2.77
3.76 3.40
3.76 3.40
4.19 3.40
0.18 6.55
0.18 7.11
9.27 6.55
8
8
10
5
6
5
1.90
2.01
2.82
2.70
2.85
3.30
5.40
5.71
8.21
8.83
9.24
13.00
13.50
10
273.05 168.27
3.40 2.77
4.19 3.40
9.27
7.11
10
3.30
3.87
8.78
10
273.05 219.08
3.40 2.77
4.19 3.76
9.27 8.18
10
3.59
4.21
9.58
14.22
12
323.85 168.27
3.96 2.77
4.57 3.40
9.53 7.11
12
4.97
5.73
12.40
18.39
12
323.85 219.08
3.96 2.77
4.57 3.76
9.53 8.18
12
5.45
6.11
13.70
19.07
12
10
323.85 273.05
3.96 3.40
4.57 4.19
9.53 9.27
12
10
5.83
6.55
14.70
19.48
150
30.11.2007
10:30 Uhr
Seite 151
O.D.2
T2
T2
T1
T1
O.D.1
O.D.1
OutSide
Dia.
OD1
OutSide
Dia.
OD2
Sch. 10S
T1
T2
XS
Sch. 80S
T1
T2
Length
Nominal
Pipe
Size
Sch.
10S
Sch.
20
STD
Sch.
40S
XS
Sch.
80S
37.18
14
12
355.60 323.85
4.78
4.57
7.92
6.35
9.53
9.53
12.70 12.70
330.20
14
12
14.27
25.65
28.55
14
10
355.60 273.05
4.78
4.19
7.92
6.35
9.53
9.27
12.70 12.70
330.20
14
10
13.21
23.73
26.41 34.40
14
355.60 219.08
4.78
3.76
7.92
6.35
9.53
8.18
12.70 12.70
330.20
14
12.07
21.70
24.15 31.44
14
355.60 168.27
4.78
3.40
7.92
9.53
7.11
12.70 10.97
330.20
14
11.01
19.78
22.01 28.66
16
14
406.40 355.60
4.78
4.78
7.92
7.92
9.53
9.53
12.70 12.70
355.60
16
14
17.24
30.98
34.48 44.90
16
12
406.40 323.85
4.78
4.57
7.92
6.35
9.53
9.53
12.70 12.70
355.60
16
12
16.52
29.69
33.05 43.03
16
10
406.40 273.05
4.78
4.19
7.92
6.35
9.53
9.27
12.70 12.70
355.60
16
10
15.37
27.62
30.75 40.04
16
406.40 219.08
4.78
3.76
7.92
6.35
9.53
8.18
12.70 12.70
355.60
16
14.15
25.43
28.30 36.86
18
16
457.20
406.40
4.78
4.78
7.92
7.92
9.53
9.53
12.70 12.70
381.00
18
16
20.94
37.62
41.87 54.52
18
14
457.20
355.60
4.78
4.78
7.92
7.92
9.53
9.53
12.70 12.70
381.00
18
14
19.71
35.41
39.41 51.32
18
12
457.20
323.85
4.78
4.57
7.92
6.35
9.53
9.53
12.70 12.70
381.00
18
12
18.94
34.02
37.87
18
10
457.20
273.05
4.78
4.19
7.92
6.35
9.53
9.27
12.70 12.70
381.00
18
10
17.70
31.81
35.41 46.11
20
18
508.00
457.20
5.54
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
20
18
38.01
62.40
62.40 81.25
20
16
508.00 406.40
5.54
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
20
16
36.01
59.11
59.11
20
14
508.00 355.60
5.54
4.78
9.53
7.92
9.53
12.70
12.70 12.70
508.00
20
14
33.98
55.83
55.83 72.70
20
12
508.00 323.85
5.54
4.57
9.53 6.35
9.53
9.53
12.70 12.70
508.00
20
12
32.76
53.78
53.78 70.02
22
20
558.80 508.00
5.54
5.54
9.53 9.53
9.53
9.53
12.70 12.70
508.00
22
20
42.01
68.96
68.96 89.80
20
18
558.80
457.20
5.54
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
22
15
40.01
65.68
65.68 85.53
22
16
558.80 406.40
5.54
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
22
16
38.01
62.40
62.40 81.25
22
14
558.80 355.60
5.54
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
22
14
36.01
59.08
59.08 76.97
24
22
609.60 558.80
6.35
5.54
9.53 9.53
9.53
9.53
12.70 12.70
508.00
24
22
52.91
75.53
75.53 98.36
24
20
609.60 508.00
6.35
5.54
9.53 9.53
9.53
9.53
12.70 12.70
508.00
24
20
50.61
72.25
72.25 94.08
24
18
609.60
457.20
6.35
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
24
18
48.31
68.96
68.96 89.80
24
16
609.60 406.40
6.35
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
24
16
46.01
65.68
65.68 85.53
24
14
609.60 355.60
6.35
4.78
9.53
7.92
9.53
9.53
12.70 12.70
508.00
24
14
43.71
62.40
62.40 81.25
49.32
76.97
26
24
660.40 609.60
12.70 9.53
9.53
9.53
12.70 12.70
609.60
26
24
26
20
660.40 508.00
12.70 9.53
9.53
9.53
12.70 12.70
609.60
26
20
26
18
660.40
457.20
12.70 7.92
9.53
9.53
12.70 12.70
609.60
26
18
26
16
660.40 406.40
12.70 7.92
9.53
9.53
12.70 12.70
609.60
26
16
107.76
28
26
711.20 660.40
12.70 12.70
9.53
9.53
12.70 12.70
609.60
28
26
28
24
711.20 609.60
12.70 9.53
9.53
9.53
12.70 12.70
609.60
28
24
28
20
711.20 508.00
12.70 9.53
9.53
9.53
12.70 12.70
609.60
28
20
82.76 107.54
28
18
711.20
457.20
12.70 7.92
9.53
9.53
12.70 12.70
609.60
28
18
30
28
762.00
711.20
12.70 12.70
9.53
9.53
12.70 12.70
609.60
30
28
30
26
762.00 660.40
12.70 12.70
9.53
9.53
12.70 12.70
609.60
30
26
30
24
762.00 609.60
12.70 9.53
9.53
9.53
12.70 12.70
609.60
30
24
30
20
762.00 508.00
12.70 9.53
9.53
9.53
12.70 12.70
609.60
30
20
32
30
812.80 762.00
12.70 12.70
9.53
9.53
12.70 12.70
609.60
32
30
32
28
812.80
12.70 12.70
9.53
9.53
12.70 12.70
609.60
32
28
711.20
151
30.11.2007
10:30 Uhr
Seite 152
O.D.2
T2
T2
T1
T1
O.D.1
O.D.1
OutSide
Dia.
OD1
OutSide
Dia.
OD2
Sch. 10S
T1
T2
XS
Sch. 80S
T1
T2
Length
Nominal
Pipe
Size
Sch.
10S
Sch.
20
STD
Sch.
40S
XS
Sch.
80S
32
26
812.80
660.40
12.70 12.70
9.53
9.53
12.70 12.70
609.60
32
26
32
24
812.80
609.60
12.70 9.53
9.53
9.53
12.70 12.70
609.60
32
24
34
32
863.60
812.80
12.70 12.70
9.53
9.53
12.70 12.70
609.60
34
32
34
30
863.60
762.00
12.70 12.70
9.53
9.53
12.70 12.70
609.60
34
30
34
28
863.60
711.20
12.70 12.70
9.53
9.53
12.70 12.70
609.60
34
28
34
26
863.60
660.40
12.70 12.70
9.53
9.53
12.70 12.70
609.60
34
26
36
34
914.40
863.60
12.70 12.70
9.53
9.53
12.70 12.70
609.60
36
34
36
32
914.40
812.80
12.70 12.70
9.53
9.53
12.70 12.70
609.60
36
32
36
30
914.40
762.00
12.70 12.70
9.53
9.53
12.70 12.70
609.60
36
30
36
28
914.40
711.20
12.70 12.70
9.53
9.53
12.70 12.70
609.60
36
28
38
36
965.20
914.40
9.53
9.53
12.70 12.70
609.60
38
36
145.82 189.48
38
34
965.20
863.60
9.53
9.53
12.70 12.70
609.60
38
34
141.88 184.36
38
32
965.20
812.80
9.53
9.53
12.70 12.70
609.60
38
32
137.94 179.24
38
30
965.20
762.00
9.53
9.53
12.70 12.70
609.60
38
30
133.99 174.12
130.06 168.99
38
28
965.20
711.20
9.53
9.53
12.70 12.70
609.60
38
28
38
26
965.20
660.40
9.53
9.53
12.70 12.70
609.60
38
26
126.12 163.88
40
38
1016.00 965.20
9.53
9.53
12.70 12.70
609.60
40
38
153.70 199.72
40
36
1016.00 914.40
9.53
9.53
12.70 12.70
609.60
40
36
149.76 194.60
40
34
1016.00 863.60
9.53
9.53
12.70 12.70
609.60
40
34
145.82 189.46
40
32
1016.00 812.80
9.53
9.53
12.70 12.70
609.60
40
32
141.88 184.36
40
30
1016.00 762.00
9.53
9.53
12.70 12.70
609.60
40
30
137.94 179.24
42
40
1066.80 1016.00
9.53
9.53
12.70 12.70
609.60
42
40
161.59 209.97
42
38
1066.80 965.20
9.53
9.53
12.70 12.70
609.60
42
38
157.64 204.85
42
36
1066.80 914.40
9.53
9.53
12.70 12.70
609.60
42
36
153.70 199.72
42
34
1066.80 863.60
9.53
9.53
12.70 12.70
609.60
42
34
149.76 194.60
42
32
1066.80 812.80
9.53
9.53
12.70 12.70
609.60
42
32
145.82 189.48
141.88 184.36
42
30
1066.80 762.00
9.53
9.53
12.70 12.70
609.60
42
30
44
42
1117.60 1066.80
9.53
9.53
12.70 12.70
609.60
44
42
169.47 220.21
44
40
1117.60 1016.00
9.53
9.53
12.70 12.70
609.60
44
40
165.53 215.09
44
38
1117.60 965.20
9.53
9.53
12.70 12.70
609.60
44
38
161.59 209.97
44
36
1117.60 914.40
9.53
9.53
12.70 12.70
609.60
44
36
157.64 204.85
46
44
1168.40 1117.60
9.53
9.53
12.70 12.70
711.20
46
44
177.35 230.45
46
42
1168.40 1066.80
9.53
9.53
12.70 12.70
711.20
46
42
173.41 225.33
46
40
1168.40 1016.00
9.53
9.53
12.70 12.70
711.20
46
40
169.47 220.21
46
38
1168.40 965.20
9.53
9.53
12.70 12.70
711.20
46
38
165.53 215.09
46
36
1168.40 914.40
9.53
9.53
12.70 12.70
711.20
46
36
165.53 215.09
48
44
1219.20 1117.60
9.53
9.53
12.70 12.70
711.20
48
44
181.29 235.57
48
42
1219.20 1066.80
9.53
9.53
12.70 12.70
711.20
48
42
177.35 230.45
48
40
1219.20 1016.00
9.53
9.53
12.70 12.70
711.20
48
40
173.41 225.33
152
30.11.2007
10:30 Uhr
Seite 153
Caps
T
O.D.
Outside
Dia.
(OD)
Sch.5S
1/2
21.34
1.65
2.11
2.77
3.73
25.40
1/2
0.036
0.040
0.046
0.045
3/4
26.67
1.65
2.11
2.87
3.91
25.40
3/4
0.049
0.052
0.059
0.086
XS
Sch.80S
Centre
to End
E
Nominal
Pipe
Size
Sch.5S
STD
Sch.10S Sch.40S
XS
Sch.80S
33.40
1.65
2.77
3.38
4.55
38.10
0.053
0.090
0.109
0.109
1 1/4
42.16
1.65
2.77
3.56
4.85
38.10
1 1/4
0.066
0.113
0.145
0.159
1 1/2
48.26
1.65
2.77
3.68
5.08
38.10
1 1/2
0.076
0.130
0.171
0.222
60.32
1.65
2.77
3.91
5.54
38.10
0.099
0.168
0.234
0.344
2 1/2
73.02
2.11
3.05
5.16
7.01
50.80
2 1/2
0.169
0.242
0.420
0.512
88.90
2.11
3.05
5.49
7.62
63.50
0.253
0.362
0.664
0.888
114.30
2.11
3.05
6.02
8.56
76.20
0.409
0.585
1.17
1.51
141.30
2.77
3.40
6.55
9.53
88.90
0.805
0.978
1.90
2.89
168.27
2.77
3.40
7.11
10.97
101.60
1.11
1.35
2.83
4.24
219.08
2.77
3.76
8.18
12.70
127.00
1.74
2.49
5.11
7.76
10
273.00
3.40
4.19
9.53
12.70
152.40
10
3.26
3.84
8.92
13.11
12
323.85
3.96
4.57
9.53
12.70
177.80
12
5.47
6.15
14.10
17.94
14
355.60
4.78
9.53
12.70
190.50
14
7.19
7.85
16.35
21.11
25.73
16
406.40
4.78
9.53
12.70
203.20
16
10.99
9.56
18.60
18
457.20
4.78
9.53
12.70
228.60
18
13.92
12.10
23.54
32.57
20
508.00
5.54
9.53
12.70
254.00
20
17.19
17.90
29.06
40.21
24
609.60
6.35
9.53
12.70
304.80
24
27.43
30.15
41.85
57.86
153
30.11.2007
10:30 Uhr
Seite 154
Stub Ends
Type A. B
O.D.
R
T
Nom.
Side
Pipe
Dia.
Size
(OD)
Sch.5S
1/2
21.34
1.65
2.11
2.77
3/4
26.67
1.65
2.11
2.87
33.40
1.65
2.77
1 1/4
42.16
1.65
2.77
Length F
STD
XS
Radius R
Dia.
Type
Type
of Lap
Pipe
(Max)
(Max)
Size
MSS
Nominal
STD
F
XS
Sch.
Sch.
Sch.
Sch.
5S
10S
40S
80S
(G)
ANSI
3.73
34.93
76.20
50.80
3.30
0.76
1/2
MSS
0.059
0.077 0.118
0.127
3.91
42.88
76.20
50.80
3.30
0.76
3/4
MSS
0.068
0.086 0.154
0.168
3.38
4.55
50.80
101.60
50.80
3.30
0.76
MSS
0.091
0.140 0.186
0.240
3.56
4.85
63.50
101.60
50.80
4.83
0.76
1 1/4
MSS
0.131
0.208 0.263
0.349
0.458
1 1/2
48.26
1.65
2.77
3.68
5.08
73.02
101.60
50.80
6.35
0.76
1 1/2
MSS
0.159
0.249 0.376
60.32
1.65
2.77
3.91
5.54
92.07
152.40
63.50
7.87
0.76
MSS
0.245
0.376 0.539
0.743
2 1/2
73.02
2.11
3.05
5.16
7.01
104.77
152.40
63.50
7.87
0.76
2 1/2
MSS
0.349
0.471
1.060
0.797
88.90
2.11
3.05
5.49
7.62
127.00
152.40
63.50
9.65
0.76
MSS
0.467
0.638 1.133
1.508
114.30
2.11
3.05
6.02
8.56
157.18
152.40
76.20
11.18 0.76
MSS
0.711
0.978 1.812
2.523
141.30
2.77
3.40
6.55
9.53
185.75
203.20
76.20
11.18 1.52
MSS
1.046
1.237 2.537
3.601
168.27
2.77
3.40
7.11
10.97
215.90
203.20 88.90
12.70 1.52
MSS
1.62
1.95
3.72
5.57
219.08
2.77
3.76
8.18
12.70
269.88
MSS
2.45
3.10
5.89
10.12
13.95
10
273.05
3.40
4.19
9.27
12.70
323.85
10
MSS
4.04
4.86
10.42
12
323.85
3.96
4.57
9.53
12.70
381.00
12
MSS
6.60
7.11
14.95
19.93
14
355.60
3.96
4.78
9.53
12.70
412.75
14
MSS
6.43
7.75
15.46
20.62
16
406.40
4.19
4.78
9.53
12.70
469.90
16
MSS
7.91
9.02
17.98
23.98
18
457.20
4.19
4.78
9.53
12.70
533.40
18
MSS
9.24
10.53 21.00
28.00
11.68
13.54 23.30
31.07
16.52
18.94 28.41
37.88
20
508.00
4.78
5.54
9.53
12.70
584.20
20
MSS
22
558.80
4.78
5.54
9.53
12.70
641.35
304.80
12.70 1.52
22
MSS
24
609.60
5.54
6.35
9.53
12.70
692.15
24
MSS
154
30.11.2007
10:30 Uhr
Seite 155
r
S
F
Diameter
in inches
10
15
20
25
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
700
800
900
1000
1200
3/8"
1/2"
1/2"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
28"
32"
36"
40"
48"
17.2
21.3
26.9
33.7
42.4
48.3
60.3
73
88.9
114.3
141.3
168.3
219.1
273.2
323.9
355.6
406.4
457.2
508
609.6
711.2
812.8
914.4
1016
1219.2
40
45
58
68
78
88
102
122
138
158
188
212
268
320
370
430
482
532
585
685
800
905
1005
1110
1330
3
3
3
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
7
7
7
7
8
8
9
9
12
15
15
17
23
23
23
28
30
30
30
30
35
-
Nominal
diameter
155
30.11.2007
10:30 Uhr
Seite 156
Elbows Design 2, 3, 5
DIN 2605 PART 1
90
180
45
e
s
s
da
da
da
2b
Tolerances
Qda
Qda
Qda
Qda
2b
Outside
45
90
Standard
2b
180
mm
mm
mm
b
da
da
mm
Wall
thickness
S
Ovality
Welding
body
edge
Special
Requirements
di
da
21,3 - 76,1
1%
1%
2,5
8,0
Smin
perm.
4%
di min:
0,4 mm
0,5%
- 114,3
min.
v. da
9,0
(Body):
da
4%
0,8 x
0,4 mm
v. da
- 219,1
0,5 mm
min.
8,5
3,5
10,0
- 12,5%
tolerance
4%
di-Tube
0,5%
min.
theor. di
0,6%
0,5 mm
273
9,5
4,0
14,0
2%
4%
457
12,0
5,0
14,0
Smax
2%
4%
0,6%
610
14,5
6,0
16,0
(Welding
2%
4%
0,6%
711
14,5
6,0
edge)
2%
4%
0,6%
- 1016
19,0
8,0
+ 15%
2%
4%
0,6%
156
1,0 mm
30.11.2007
10:30 Uhr
Seite 157
Elbows
DIN 2605 90
Radius r mm
21.3
da
Outside
da mm Radius r mm
5
2: 17.5 2.5
3: 28
2.5
5: 42.5 2.5
2
2.3
2.6
3.2
0.03
0.03
0.03
0.04
0.04
0.05
0.05
0.06
0.06
0.07
0.08
0.10
2: 25
2.5
3: 29
2.5
5: 57.5 2.5
2.3
2.9
3.2
4
0.05
0.06
0.07
0.09
0.06
0.08
0.08
0.10
0.13
0.16
0.17
0.20
2: 27.5 2.5
3: 35
2.5
5: 67.5 2.5
2.6
2.9
3.2
3.6
0.08
0.09
0.10
0.11
0.10
0.11
0.12
0.14
0.20
0.22
0.24
0.27
57
31.8
33.7
2: 25
2.5
3: 38
2.5
5: 72.5 2.5
38
2: 32.5 2.5
3: 45
2.5
5: 82.5 2.5
42.4
2: 32
2.5
3: 48
2.5
5: 92.5 2.5
44.5
2:40
2.5
3: 51
2.5
5: 97.5 2.5
48.3
2: 38
3
3: 57
3
5: 107.5 3
2.6
3.2
3.6
4
2.6
2.9
3.2
3.6
0.09
0.11
0.13
0.14
0.13
0.13
0.14
0.16
0.12
0.14
0.16
0.17
0.16
0.18
0.19
0.22
0.23
0.27
0.30
0.33
0.29
0.33
0.36
0.40
2.6
3.6
4
4.5
5
0.15
0.20
0.22
0.25
0.27
0.19
0.26
0.28
0.31
0.34
0.37
0.50
0.55
0.61
0.67
2.6
2.9
3.2
3.6
0.17
0.19
0.20
0.23
0.22
0.24
0.26
0.29
0.41
0.46
0.50
0.56
2.6
3.2
3.6
4
4.5
5
0.20
0.24
0.26
0.29
0.32
0.36
0.26
0.32
0.36
0.39
0.44
0.48
0.49
0.60
0.67
0.74
0.82
0.90
Weight/kg
Design
2
3
2.9
3.2
3.6
4
2.9
3.2
3.6
4
4.5
5
5.6
6.3
0.33
0.35
0.39
0.43
0.35
0.39
0.43
0.48
0.53
0.59
0.65
0.72
0.44
0.48
0.54
0.59
0.49
0.54
0.60
0.66
0.74
0.81
0.90
1.00
0.77
0.85
0.95
1.05
0.87
0.96
1.07
1.18
1.31
1.45
1.60
1.78
3
3
3
2.9
3.2
3.6
4
0.39
0.43
0.48
0.53
0.56
0.62
0.69
0.76
0.97
1.07
1.19
1.31
2: 65
3: 92
5: 160
3
3
3
2.9
3.2
3.6
4
0.49
0.54
0.60
0.66
0.69
0.76
0.85
0.94
1.21
1.32
1.48
1.64
2: 63
3: 95
5: 175
3
3
3
2.9
3.6
4
4.5
5
5.6
6.3
7.1
0.58
0.71
0.78
0.87
0.96
1.07
1.19
1.33
0.78
0.96
1.06
1.19
1.31
1.45
1.62
1.80
1.44
1.77
1.96
2.18
2.41
2.68
2.98
3.32
2: 76
3: 114
5: 205
3
3
3
3.2
4
4.5
5
5.6
6.3
8
0.88
1.09
1.21
1.34
1.49
1.66
2.07
1.22
1.51
1.68
1.86
2.07
2.31
2.87
2.18
2.70
3.02
3.33
3.70
4.13
5.14
2: 100
3: 142.5
5: 252.5
3
3
3
3.6
4
4.5
5
1.46
1.61
1.80
2.00
2.07
2.30
2.57
2.84
3.68
4.07
4.56
5.04
2: 52.5
3: 72.0
5: 127.5
3
3
3
2: 51
3: 76
5: 135
3
3
3
2: 57.5
3: 82.5
5: 142.5
60.3
26.9
Wall Thickn.
s mm
63.5
70
76.1
88.9
108
157
30.11.2007
10:30 Uhr
Seite 158
Elbows
DIN 2605 90
Radius r mm
114.3
2: 102
3: 152
5: 270
3
3
3
133
2: 125
4
3: 181
4
5: 312.5 4
139.7
2: 127
3: 190
5: 330
4
4
4
Outside
da mm Radius r mm
5
3.6
4
4.5
5.6
6.3
7.1
8.8
1.62
1.79
2.01
2.48
2.77
3.10
3.78
2.35
2.61
2.92
3.60
4.02
4.50
5.48
4.17
4.61
5.17
6.37
7.12
7.96
9.71
4
4.5
5
6.3
2.50
2.80
3.10
3.87
3.62
4.05
4.49
5.60
6.25
7.00
7.75
9.66
4
4.5
5
6.3
7.1
8
10
2.79
3.12
3.46
4.31
4.83
5.41
6.66
4.01
4.49
4.97
6.20
6.95
7.78
9.57
6.94
7.78
8.61
10.7
12.0
13.5
16.6
4.5
5
5.6
6.3
4.04
4.47
4.99
5.59
5.82
6.44
7.19
8.05
10.1
11.2
12.5
14.0
4.5
5.6
6.3
7.1
8
11
4.43
5.47
6.13
6.87
7.70
10.4
6.52
8.06
9.03
10.1
11.4
15.3
11.1
13.8
15.4
17.3
19.4
26.1
5.4
5.6
6.3
7.1
7.09
7.35
8.23
9.24
10.6
11.0
12.4
13.9
17.9
18.6
20.8
23.4
323.9
2: 150
3: 216
5: 375
4
4
4
2: 152
3: 229
5: 390
4
4
4
193.7
2: 180
3: 270
5: 455
4
4
4
2: 203
3: 305
5: 510
4
4
4
6.3
8
8.8
10
12.5
10.9
13.7
15.1
17.0
21.0
15.8
20.0
21.9
24.7
30.5
26.5
33.4
36.6
41.3
51.0
2: 254
3: 381
5: 650
5
5
5
6.3
7.1
8.8
10
12.5
16.5
18.6
22.9
25.9
32.0
24.8
27.9
34.3
38.8
48.1
42.3
47.5
58.4
66.2
82.0
219.1
273
158
5
5
5
7.1
8
10
12.5
26.6
29.9
37.1
46.0
39.8
44.7
55.6
68.9
67.5
75.9
94.2
117
10
10
10
8
47.5
11
12.5
38.2
71.4
52.1
59.0
57.5
114
78.3
88.6
91.6
2: 356
3: 533
5: 850
125
141
2: 406
3: 610
5: 970
10
10
10
8.8
10
12.5
14.2
55.1
62.4
77.5
87.7
82.6
93.6
116
131
131
149
185
209
2: 457
3: 686
5: 1122
10
15
15
15
78.8
11
12.5
14.2
119
86.5
98.0
111
194
130
148
167
213
242
274
2: 508
3: 762
5: 1245
25
25
25
11
12.5
14.2
16
107
121
137
154
161
183
207
232
264
299
338
380
2: 610
3: 914
5: 1525
25
25
25
12.5
14.2
16
17.5
176
200
224
245
264
299
336
367
434
491
552
602
2: 711
3: 1067
5: 1778
30
30
30
12.5
14.2
16
17.5
237
268
302
329
355
403
452
494
592
671
754
823
2: 813
3: 1219
5: 2033
35
35
35
12.5
14.2
16
17.5
314
356
400
437
465
527
593
647
775
879
988
1078
2: 914
3: 1372
5: 2285
40
40
40
14.2
16
17.5
20
451
507
555
632
678
763
833
949
1114
1253
1389
1583
355.6
406.4
457.2
609.6
168.3
Weight/kg
Design
2
3
2: 305
3: 457
5: 775
508
159
Wall Thickn.
s mm
711.2
812.8
914.4
30.11.2007
10:30 Uhr
Seite 159
d1
d1
S1
S1
S2
S2
d2
d2
Tolerances
Qd1
Qd2
Qd1
Qd1
Outside
da
Qd1
Standard
d1+2
mm
a, b
Wall
thickness
S1+2
Ovality
Welding
body
edge
Special
Requirements
di
d1+2
mm
21.3 - 76.1
1%
1%
2.0
Smin
perm.
4%
di min:
0.4 mm
0.5%
- 114.3
min.
v. da
2.0
(Body):
da
4%
0.8 x
0.4 mm
v. da
- 219.1
0.5 mm
min.
2.0
- 12.5%
tolerance
4%
di-Tube
0.5%
min.
1.0 mm
3.0
2%
4%
(theor. di)
0.6%
0.5 mm
2%
4%
- 273
- 323.9
3.0
Smax
0.6%
(Welding
edge):
+ 15%
159
10.12.2007
11:23 Uhr
Seite 160
Tees
DIN 2615
a
Standard Execution
Bevel to DIN 2559, Shape 22 up to 3,2 mm
d2
d2
s2
s2
s1
s1
b
d1
d1
Run Size
Branch
Outside Wall
thickn.
d1 mm s1 mm
21.3
2.0
3.2
26.9
4.0
2.3
3.2
4.0
33.7
2.6
3.2
4.0
160
Weight
Run Size
approx.
Outside
Wall
Outside
Wall
approx.
thickn.
thickness
mm
mm
kg
d1 mm
s1 mm
d2 mm
s2 mm
42.4
2.6
Outside
Wall
thickness
mm
mm
d2 mm
s2 mm
21.3
17.2
21.3
17.2
2.0
1.8
3.2
2.9
25
25
25
25
25
25
25
25
0.09
0.09
0.15
0.15
21.3
26.9
21.3
4.0
2.3
2.0
25
29
29
25
29
29
0.18
0.15
0.15
17.2
26.9
1.8
3.2
29
29
29
29
0.15
0.21
21.3
26.9
21.3
3.2
4.0
4.0
29
29
29
29
29
29
0.21
0.25
0.25
33.7
26.9
2.6
2.3
38
38
38
38
0.29
0.29
21.3
33.7
26.9
2.0
3.2
3.2
38
38
38
38
38
38
0.29
0.35
0.35
21.3
33.7
26.9
21.3
3.2
4.0
4.0
4.0
38
38
38
38
38
38
38
38
0.35
0.42
0.42
0.42
kg
48.3
Branch
Weight
3.6
42.4
33.7
26.9
42.4
2.6
2.6
2.3
3.6
48
48
48
48
48
48
48
48
0.42
0.42
0.42
0.57
4.0
33.7
26.9
42.4
3.2
3.2
4.0
48
48
48
48
48
48
0.57
0.57
0.63
33.7
26.9
4.0
4.0
48
48
48
48
0.63
0.63
48.3
42.4
33.7
2.6
2.6
2.6
57
57
57
57
57
57
0.59
0.59
0.59
26.9
48.3
2.3
4.0
57
57
57
57
0.59
0.90
42.4
33.7
26.9
3.6
3.2
3.2
57
57
57
57
57
57
0.90
0.90
0.90
48.3
42.4
33.7
26.9
5.0
4.0
4.0
4.0
57
57
57
57
57
57
57
57
1.10
1.10
1.10
1.10
2.6
4.0
5.0
30.11.2007
10:30 Uhr
Seite 161
Tees
DIN 2615
a
d2
d2
s2
s2
s1
s1
b
d1
d1
Weight
Run Size
Outside
Run Size
Wall
Outside
Wall
approx.
Outside
Wall
Outside
Wall
approx.
thickn.
thickness
mm
mm
kg
thickn.
thickness
mm
mm
kg
d1 mm
s1 mm
d2 mm
s2 mm
57.0
60.3
Branch
2.9
2.9
4.5
5.6
76.1
2.9
5.0
7.1
88.9
3.2
5.6
8.0
108.0
3.6
57.0
60.3
48.3
42.4
33.7
60.3
48.3
42.4
33.7
60.3
48.3
42.4
33.7
76.1
60.3
48.3
42.4
76.1
60.3
48.3
42.4
76.1
60.3
48.3
42.4
88.9
76.1
60.3
48.3
42.4
88.9
76.1
60.3
48.3
42.4
88.9
76.1
60.3
48.3
42.4
108.0
2.9
2.9
2.6
2.6
2.6
4.5
4.0
3.6
3.2
5.6
5.0
4.0
4.0
2.9
2.9
2.6
2.6
5.0
4.5
4.0
3.6
7.1
5.6
5.0
4.0
3.2
2.9
2.9
2.6
2.6
5.6
5.0
4.5
4.0
3.6
8.0
7.1
5.6
5.0
4.0
3.6
d1 mm
60
64
64
64
64
64
64
64
64
64
64
64
64
76
76
76
76
76
76
76
76
76
76
76
76
86
86
86
86
86
86
86
86
86
86
86
86
86
86
86
100
60
64
60
57
51
64
60
57
51
64
60
57
51
76
70
67
64
76
70
67
64
76
70
67
64
86
83
76
73
70
86
83
76
73
70
86
83
76
73
70
100
0.85
0.90
0.90
0.90
0.90
1.35
1.35
1.35
1.35
1.65
1.65
1.65
1.65
1.35
1.35
1.35
1.35
2.30
2.30
2.30
2.3
3.15
3.15
3.15
3.15
1.95
1.95
1.95
1.95
1.95
3.70
3.70
3.70
3.70
3.70
4.60
4.60
4.60
4.60
4.60
3.15
114.3
Branch
s1 mm d2 mm
3.6
6.3
8.8
133.0
139.7
4.0
4.0
6.3
10.0
159.0
168.3
4.5
4.5
7.1
11.0
114.3
88.9
76.1
60.3
114.3
88.9
76.1
60.3
114.3
88.9
76.1
60.3
133.0
139.7
114.3
88.9
76.1
139.7
114.3
88.9
76.1
139.7
114.3
88.9
76.1
159.0
168.3
139.7
114.3
88.9
168.3
139.7
114.3
88.9
168.3
139.7
114.3
88.9
Weight
s2 mm
3.6
3.2
2.9
2.9
6.3
5.6
5.0
4.5
8.8
8.0
7.1
5.6
4.0
4.0
3.6
3.2
2.9
6.3
6.3
5.6
5.0
10.0
8.8
8.0
7.1
4.5
4.5
4.0
3.6
3.2
7.1
6.3
6.3
5.6
11.0
10.0
8.8
8.0
105
105
105
105
105
105
105
105
105
105
105
105
120
124
124
124
124
124
124
124
124
124
124
124
124
138
143
143
143
143
143
143
143
143
143
143
143
143
105
98
95
89
105
98
95
89
105
98
95
89
120
124
117
111
108
124
117
111
108
124
117
111
108
138
143
137
130
124
143
137
130
124
143
137
130
124
3.30
3.30
3.30
3.30
5.70
5.70
5.70
5.70
7.70
7.70
7.70
7.70
4.60
5.10
5.10
5.10
5.10
7.90
7.90
7.90
7.90
12.0
12.0
12.0
12.0
7.50
8.10
8.10
8.10
8.10
13.0
13.0
13.0
13.0
19.0
19.0
19.0
19.0
161
30.11.2007
10:30 Uhr
Seite 162
Tees
DIN 2615
a
d2
d2
s2
s2
s1
s1
b
d1
d1
Weight
Run Size
Outside
Run Size
Wall
Outside
Wall
approx.
Outside
Wall
Outside
Wall
approx.
thickn.
thickness
mm
mm
kg
thickn.
thickness
mm
mm
kg
s1 mm
d2 mm
s2 mm
d1 mm
s1 mm
d2 mm
s2 mm
219.1
168.3
139.7
114.3
6.3
4.5
4.0
3.6
178
178
178
178
178
168
162
156
18.0
18.0
18.0
18.0
323.9
7.1
323.9
273.0
219.1
168.3
7.1
6.3
6.3
4.5
254
254
254
254
254
241
229
219
42.0
42.0
42.0
42.0
88.9
219.1
168.3
3.2
8.0
7.1
178
178
178
152
178
168
18.0
23.5
23.5
139.7
323.9
273.0
4.0
10.0
8.8
254
254
254
216
254
241
42.0
59.0
59.0
139.7
114.3
6.3
6.3
178
178
162
156
23.5
23.5
219.1
168.3
8.0
7.1
254
254
229
219
59.0
59.0
88.9
219.1
168.3
5.6
12.5
11.0
178
178
178
152
178
168
23.5
35.5
35.5
139.7
323.9
273.0
6.3
16.0
14.2
254
254
254
216
254
241
59.0
92.0
92.0
139.7
114.3
10.0
8.8
178
178
162
156
35.5
35.5
219.1
168.3
12.5
11.0
254
254
229
219
92.0
92.0
88.9
267.0
273.0
8.0
6.3
6.3
178
210
216
152
210
216
35.5
25.5
26.5
139.7
355.6
323.9
10.0
8.0
7.1
254
279
279
216
279
270
92.0
60.0
60.0
219.1
168.3
139.7
114.3
273.0
219.1
168.3
139.7
114.3
273.0
219.1
168.3
139.7
114.3
6.3
4.5
4.0
3.6
8.8
8.0
7.1
6.3
6.3
14.2
12.5
11.0
10.0
8.8
216
216
216
216
216
216
216
216
216
216
216
216
216
216
203
194
191
184
216
203
194
191
184
216
203
194
191
184
26.5
26.5
26.5
26.5
36.5
36.5
36.5
36.5
36.5
58.0
58.0
58.0
58.0
58.0
273.0
219.1
168.3
355.6
323.9
273.0
219.1
168.3
355.6
323.9
273.0
219.1
168.3
6.3
6.3
4.5
11.0
10.0
8.8
8.0
7.1
17.5
16.0
14.2
12.5
11.0
279
279
279
279
279
279
279
279
279
279
279
279
279
257
248
238
279
270
257
248
238
279
270
257
248
238
60.0
54.0
54.0
86.0
86.0
86.0
76.0
76.0
130.0
130.0
130.0
116.0
116.0
d1 mm
219.1
Branch
6.3
8.0
12.5
267.0
273.0
6.3
6.3
8.8
14.2
162
Branch
10.0
16.0
355.6
8.0
11.0
17.5
Weight
30.11.2007
10:30 Uhr
Seite 163
Tees
DIN 2615
a
d2
s2
s2
s1
s1
b
d1
d1
Weight
Run Size
Outside
Run Size
Wall
Outside
Wall
approx.
Outside
Wall
Outside
Wall
approx.
thickn.
thickness
mm
mm
kg
thickn.
thickness
mm
mm
kg
d1 mm
s1 mm
d2 mm
s2 mm
406.4
355.6
323.9
273.0
8.8
8.0
7.1
6.3
305
305
305
305
305
305
295
283
82.0
82.0
82.0
82.0
219.1
168.3
406.4
6.3
4.5
12.5
305
305
305
273
264
305
74.0
74.0
118.0
355.6
323.9
11.0
10.0
305
305
305
295
273.0
219.1
168.3
8.8
8.0
7.1
305
305
305
406.4
355.6
20.0
17.5
323.9
273.0
219.1
406.4
Branch
8.8
12.5
20.0
457.0
10.0
14.2
22.2
Branch
d1 mm
s1 mm d2 mm
508.0
11.0
Weight
s2 mm
508.0
457.0
406.4
355.6
11.0
10.0
8.8
8.0
381
381
381
381
381
368
356
356
160.0
160.0
160.0
160.0
323.9
273.0
508.0
7.1
6.3
16.0
381
381
381
346
333
381
160.0
160.0
245.0
118.0
118.0
457.0
406.4
14.2
12.5
381
381
368
356
245.0
195.0
283
273
264
118.0
106.0
106.0
355.6
323.9
273.0
11.0
10.0
8.8
381
381
381
356
346
333
195.0
195.0
195.0
305
305
305
305
182.0
182.0
508.0
457.0
25.0
22.2
381
381
381
368
348.0
348.0
16.0
14.2
12.5
305
305
305
295
283
273
182.0
182.0
132.0
406.4
355.6
323.9
20.0
17.5
16.0
381
381
381
356
356
346
306.0
306.0
306.0
168.3
457.0
11.0
10.0
305
343
264
343
132.0
131.0
273.0
610.0
14.2
12.5
381
432
333
432
306.0
242.0
406.4
355.6
323.9
457.0
406.4
355.6
323.9
457.0
406.4
355.6
323.9
273.0
8.8
8.0
7.1
14.2
12.5
11.0
10.0
22.2
20.0
17.5
16.0
14.2
343
343
343
343
343
343
343
343
343
343
343
343
330
330
321
343
330
330
321
343
330
330
321
308
131.0
131.0
131.0
183.0
183.0
183.0
183.0
268.0
268.0
226.0
226.0
226.0
508.0
457.0
406.4
355.6
323.9
610.0
508.0
457.0
406.4
355.6
323.9
610.0
508.0
457.0
406.4
355.6
323.9
273.0
11.0
10.0
8.8
8.0
7.1
17.5
16.0
14.2
12.5
11.0
10.0
30.0
25.0
22.2
20.0
17.5
16.0
14.2
432
432
432
432
432
432
432
432
432
432
432
432
432
432
432
432
432
432
432
419
406
406
397
432
432
419
406
406
397
432
432
419
406
406
397
384
242.0
242.0
242.0
242.0
242.0
333.0
333.0
333.0
333.0
333.0
333.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
16.0
25.0
610.0
12.5
17.5
30.0
163
d2
30.11.2007
10:30 Uhr
Seite 164
Reduced Tees
DIN 2615
a
d2
id2
s = seamless, w = welded
s2
d1
id1
s1
Size
Pieces
d1
s1
d2
s2
21.3
21.3
26.9
26.9
26.9
33.7
33.7
33.7
33.7
33.7
33.7
33.7
33.7
42.4
42.4
42.4
42.4
42.4
42.4
42.4
42.4
48.3
48.3
48.3
48.3
48.3
48.3
48.3
48.3
48.3
48.3
48.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
2.0
3.2
2.3
3.2
4.0
2.0
2.0
2.6
2.6
3.2
3.2
4.0
4.0
2.0
2.0
2.6
2.6
3.6
3.6
4.0
4.0
2.0
2.0
2.6
2.6
2.6
4.0
4.0
4.0
5.0
5.0
5.0
2.0
2.0
2.0
2.0
2.0
2.9
2.9
2.9
2.9
2.9
4.0
4.0
4.0
4.5
17.2
17.2
21.3
21.3
21.3
26.9
21.3
26.9
21.3
26.9
21.3
26.9
21.3
33.7
21.3
33.7
26.9
33.7
26.9
33.7
26.9
42.4
33.7
42.4
33.7
26.9
42.4
33.7
26.9
42.4
33.7
26.9
48.3
42.4
33.7
26.9
21.3
48.3
42.4
33.7
26.9
21.3
48.3
42.4
33.7
48.3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1.8
2.9
2.0
3.2
4.0
1.6
1.6
2.3
2.0
3.2
3.2
4.0
4.0
2.0
1.6
2.6
2.3
3.2
3.2
4.0
4.0
2.0
2.0
2.6
2.6
2.3
3.6
3.2
3.2
4.0
4.0
4.0
2.0
2.0
2.0
1.6
1.6
2.6
2.6
2.6
2.3
2.0
4.0
3.6
3.2
4.0
164
s
s
s
s
s
w*
w*
s
s
s
s
s
s
w
w*
s
s
s
s
s
s
w
w
s
s
s
s
s
s
s
s
s
w
w
w
w*
w*
s
s
s
s
s
s
s
s
s
Size
Pieces
kg
d1
s1
d2
0.09
0.12
0.15
0.18
0.22
0.20
0.20
0.26
0.26
0.30
0.30
0.38
0.38
0.32
0.32
0.42
0.42
0.57
0.57
0.64
0.64
0.46
0.46
0.59
0.59
0.59
0.85
0.85
0.85
1.05
1.05
1.05
0.57
0.54
0.50
0.50
0.48
0.79
0.76
0.72
0.72
0.72
1.25
1.20
1.20
1.40
25
25
29
29
29
38
38
38
38
38
38
38
38
48
48
48
48
48
48
48
48
57
57
57
57
57
57
57
57
57
57
57
64
64
64
64
64
64
64
64
64
64
64
64
64
64
25
25
29
29
29
38
38
38
38
38
38
38
38
48
48
48
48
48
48
48
48
57
57
57
57
57
57
57
57
57
57
57
60
57
51
44
42
60
57
51
44
42
60
57
51
60
60.3
60.3
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
76.1
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
114.3
114.3
114.3
114.3
114.3
114.3
114.3
114.3
114.3
114.3
114.3
114.3
139.7
139.7
139.7
139.7
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
4.5
4.5
2.3
2.3
2.3
2.3
2.9
2.9
2.9
5.0
5.0
5.0
5.0
7.1
7.1
7.1
2.3
2.3
2.3
2.3
3.2
3.2
3.2
5.6
5.6
5.6
5.6
8.0
8.0
8.0
2.6
2.6
2.6
2.6
2.6
3.6
3.6
3.6
6.3
6.3
6.3
6.3
2.6
2.6
2.6
2.6
42.4 x
33.7 x
60.3 x
48.3 x
42.4 x
33.7 x
60.3 x
48.3 x
42.4 x
60.3 x
60.3 x
48.3 x
42.4 x
60.3 x
48.3 x
42.4 x
76.1 x
60.3 x
48.3 x
42.4 x
76.1 x
60.3 x
48.3 x
76.1 x
60.3 x
60.3 x
48.3 x
76.1 x
60.3 x
48.3 x
88.9 x
76.1 x
60.3 x
48.3 x
42.4 x
88.9 x
76.1 x
60.3 x
88.9 x
76.1 x
60.3 x
60.3 x
114.3 x
88.9 x
76.1 x
60.3 x
s2
3.6
3.2
2.0
2.0
2.0
2.0
2.9
2.6
2.6
4.5
4.0
4.0
3.6
5.6
5.0
4.0
2.3
2.0
2.0
2.0
2.9
2.9
2.6
5.0
4.5
4.0
4.0
7.1
5.6
5.0
2.3
2.3
2.0
2.0
2.0
3.2
3.6
2.9
5.6
5.0
4.5
4.0
2.6
2.3
2.3
2.0
s
s
w
w
w
w
s
s
s
s
s
s
s
s
s
s
w
w
w
w
s
s
s
s
s
s
s
s
s
s
w
w
w
w
w
s
s
s
s
s
s
s
w
w
w
w
kg
1.35
1.35
1.00
0.95
0.95
0.90
1.25
1.16
1.12
1.90
1.80
1.85
1.85
2.70
2.65
2.65
1.40
1.35
1.30
1.30
1.85
1.80
1.70
3.10
2.90
2.85
2.80
4.20
4.00
4.00
2.25
2.15
2.15
2.15
2.15
3.00
2.90
2.90
5.10
5.00
4.85
4.80
3.30
3.10
3.10
3.00
64
64
76
76
76
76
76
76
76
76
76
76
76
76
76
76
86
86
86
86
86
86
86
86
86
86
86
86
86
86
105
105
105
105
105
105
105
105
105
105
105
105
124
124
124
124
57
51
70
67
64
57
70
67
64
70
70
67
64
70
67
64
83
76
73
70
83
76
73
83
76
76
73
83
76
73
98
95
89
86
84
98
95
89
98
95
89
89
117
111
108
105
30.11.2007
10:30 Uhr
Seite 165
Reduced Tees
DIN 2615
a
d2
id2
s2
d1
id1
s1
Size
d1
Pieces
x
139.7 x
139.7 x
139.7 x
139.7 x
139.7 x
139.7 x
139.7 x
139.7 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
168.3 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
219.1 x
s1
d2
4.0
4.0
6.3
6.3
6.3
10.0
10.0
10.0
2.6
2.6
2.6
4.5
4.5
4.5
7.1
7.1
7.1
11.0
11.0
11.0
2.9
2.9
2.9
6.3
6.3
6.3
6.3
8.0
8.0
8.0
8.0
12.5
12.5
12.5
12.5
114.3 x
88.9 x
114.3 x
88.9 x
76.1 x
114.3 x
88.9 x
76.1 x
139.7 x
114.3 x
88.9 x
139.7 x
114.3 x
88.9 x
139.7 x
114.3 x
88.9 x
139.7 x
114.3 x
88.9 x
168.3 x
139.7 x
114.3 x
168.3 x
139.7 x
114.3 x
88.9 x
168.3 x
139.7 x
114.3 x
88.9 x
168.3 x
139.7 x
114.3 x
88.9 x
s2
3.6
3.2
6.3
5.6
5.0
8.8
8.0
7.1
2.6
2.6
2.3
4.5
3.6
3.2
6.3
6.3
5.6
11.0
8.8
8.0
2.6
2.6
2.6
4.5
4.0
3.6
3.2
7.1
6.3
6.3
5.6
11.0
10.0
8.8
8.0
s
s
s
s
s
s
s
s
w*
w*
w*
s
s
s
s
s
s
s
s
s
w*
w*
w*
s
s
s
s
s
s
s
s
s
s
s
s
kg
4.70
4.60
7.20
7.00
6.80
11.30
11.00
10.90
5.30
5.30
5.00
6.90
6.70
6.60
10.80
10.70
10.40
16.60
16.30
16.00
7.20
7.20
7.00
14.40
13.60
13.60
13.60
18.40
17.40
17.40
17.40
28.80
27.60
27.60
27.60
124
124
124
124
124
124
124
124
143
143
143
143
143
143
143
143
143
143
143
143
178
178
178
178
178
178
178
178
178
178
178
178
178
178
178
117
111
117
111
108
117
111
108
137
130
124
137
130
124
137
130
124
137
130
124
168
162
156
168
162
156
152
168
162
156
152
168
162
156
152
165
s = seamless, w = welded
30.11.2007
10:30 Uhr
Seite 166
s1
s1
d2
d1
s2
d2
d1
s2
I1
I1
Tolerances
Qd2
Qd2
Qd1
Outside
Qd1
Standard
Special
Wall
da
d1+2
mm
21,3
I1
Ovality
thickness
Welding
S1+2
edge
Requirements
body
di
d1+2
mm
76,1
1%
1%
2,5
Smin
- 114,3
min.
v.da
3,0
(Body)
- 219,1
0,5 mm
min.
3,5
-12,5 %
1,0 mm
4,0
- 273
- 323,9
5,0
Smax
4%
di min:
0,4 mm
0,5 %
da
4%
0,8x
0,4 mm
v.da
Tolerance
4%
di-tube
0,5 %
min.
2%
4%
(theor.di)
0,6 %
0,5 mm
2%
4%
des
0,6 %
(Welding edge):
+ 15 %
166
30.11.2007
10:30 Uhr
Seite 167
d2
d1
d2
i.d.2
i.d.1
d1
Reducer
Concentric DIN 2616 Part 2 Eccentric DIN 2616 Part 1
s2
s1
Tube
WT
outside
d1 mm
21.3
26.9
Length
Weight
Tube
conc/ecc
approx. kg
outside
d2 mm
s2 mm
L mm
2.0
3.2
4.0
2.3
17.2
17.2
17.2
21.3
1.8
2.9
2.9
2.0
38
38
38
38
0.03
0.05
0.06
0.05
17.2
21.3
17.2
21.3
17.2
1.8
3.2
2.9
4.0
3.2
38
38
38
38
38
0.05
0.06
0.06
0.08
0.08
26.9
25.0
21.3
20.0
26.9
2.3
2.0
2.0
2.0
2.3
50
50
50
50
50
0.08
0.08
0.08
0.08
0.09
21.3
26.9
21.3
26.9
2.0
3.2
3.2
4.0
50
50
50
50
0.09
0.11
0.11
0.18
21.3
33.7
30.0
26.9
25.0
21.3
20.0
33.7
26.9
21.3
33.7
26.9
21.3
33.7
26.9
21.3
4.0
2.6
2.6
2.3
2.0
2.0
2.0
2.6
2.3
2.0
3.2
3.2
3.2
4.0
4.0
4.0
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
0.18
0.10
0.10
0.10
0.10
0.10
0.10
0.11
0.11
0.11
0.14
0.14
0.14
0.17
0.17
0.17
4.0
33.7
WT
s1 mm
3.2
30.0
Tube
outside
2.6
2.6
3.2
4.0
38.0
2.6
42.4
2.6
3.6
4.0
s2
s1
WT
Tube
WT
outside
Length
Weight
conc/ecc
approx. kg
d1 mm
s1 mm
d2 mm
s2 mm
L mm
44.5
2.6
38.0
33.7
30.0
26.9
2.6
2.6
2.6
2.3
64
64
64
64
0.15
0.15
0.15
0.15
25.0
21.3
20.0
42.4
33.7
2.0
2.0
2.0
2.6
2.6
64
64
64
64
64
0.15
0.15
0.15
0.17
0.17
26.9
42.4
33.7
26.9
42.4
2.3
3.6
3.2
3.2
4.0
64
64
64
64
64
0.17
0.27
0.27
0.27
0.31
33.7
26.9
48.3
44.5
4.0
4.0
2.6
2.6
64
64
76
76
0.31
0.31
0.26
0.26
42.4
38.0
33.7
30.0
26.9
25.0
21.3
20.0
48.3
42.4
33.7
26.9
21.3
48.3
42.4
33.7
26.9
21,3
2.6
2.6
2.6
2.6
2.3
2.0
2.0
2.0
2.6
2.6
2.6
2.3
2.0
4.0
3.6
3.2
3.2
3,2
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
76
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.26
0.28
0.28
0.28
0.28
0.28
0.37
0.37
0.37
0.37
0,37
48.3
2.6
4.0
5.0
57.0
60.3
2.9
2.9
4.5
167
30.11.2007
10:30 Uhr
Seite 168
d2
d1
d2
i.d.2
i.d.1
d1
Reducer
DIN 2616
s2
s1
Tube
WT
outside
d1 mm
70.0
76.1
s1 mm
d2 mm
5.6
48.3
42.4
33.7
26.9
60.3
57.0
48.3
44.5
42.4
38.0
33.7
30.0
60.3
57.0
48.3
42.4
38.0
33.7
30.0
60.3
48.3
42.4
33.7
60.3
48.3
42.4
33.7
76.1
70.0
60.3
57.0
48.3
44.5
42.4
33.7
30.0
76.1
60.3
48.3
42.4
76.1
60.3
48.3
42.4
88.9
76.1
60.3
57.0
48.3
2.9
2.9
5.0
7.1
88.9
3.2
5.6
8.0
101.6
168
Tube
WT
outside
3.6
Length
Weight
conc/ecc approx. kg
s2 mm
5.0
4.0
4.0
4.0
2.9
2.9
2.6
2.6
2.6
2.6
2.6
2.6
2.9
2.9
2.6
2.6
2.6
2.6
2.6
4.5
4.0
3.6
3.2
5.6
5.0
4.0
4.0
2.9
2.9
2.9
2.9
2.6
2.6
2.6
2.6
2.6
5.0
4.5
4.0
3.6
7.1
5.6
5.0
4.0
3.2
2.9
2.9
2.9
2.6
L mm
76
76
76
76
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
90
100
100
100
100
100
Tube
0.52
0.52
0.52
0.52
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.42
0.42
0.42
0.42
0.42
0.42
0.42
0.71
0.71
0.71
0.71
0.98
0.98
0.98
0.98
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.55
0.93
0.93
0.93
0.93
1.30
1.30
1.30
1.30
0.78
0.78
0.78
0.78
0.78
WT
Tube
outside
d1 mm
s2
s1
WT
outside
s1 mm
108.0
3.6
114.3
3.6
6.3
8.8
133.0
4.0
139.7
4.0
6.3
10
d2 mm
88.9
76.1
70.0
60.3
57.0
48.3
44.5
42.4
38.0
30.0
101.6
88.9
76.1
60.3
57.0
48.3
44.5
42.4
88.9
76.1
60.3
48.3
88.9
76.1
60.3
48.3
114.3
108.0
88.9
76.1
60.3
57.0
114.3
108.0
101.6
88.9
76.1
60.3
114.3
88.9
76.1
60.3
114.3
88.9
76.1
60.3
s2 mm
3.2
2.9
2.9
2.9
2.9
2.6
2.6
2.6
2.6
2.6
3.6
3.2
2.9
2.9
2.9
2.6
2.6
2.6
5.6
5.0
4.5
4.0
8.0
7.1
5.6
5.0
3.6
3.6
3.2
2.9
2.9
2.9
3.6
3.6
3.6
3.2
2.9
2.9
6.3
5.6
5.0
4.5
8.8
8.0
7.1
5.6
Length
Weight
conc/ecc
approx. kg
L mm
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
127
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.85
0.98
0.98
0.98
0.98
0.98
0.98
0.98
0.98
1.68
1.68
1.68
1.68
2.29
2.29
2.29
2.29
1.61
1.61
1.61
1.61
1.61
1.61
1.70
1.70
1.70
1.70
1.70
1.70
2.63
2.63
2.63
2.63
4.06
4.06
4.06
4.06
30.11.2007
10:30 Uhr
Seite 169
d2
d1
d2
i.d.2
i.d.1
s2
s1
Tube
WT
outside
d1 mm
s1 mm
159.0
4.5
168.3
4.5
7.1
11.0
193.7
219.1
5.6
6.3
8.0
12.5
267.0
Tube
WT
outside
6.3
d2 mm
s2 mm
139.7
133.0
114.3
108.0
88.9
76.1
60.3
57.0
139.7
133.0
114.3
108.0
88.9
76.1
60.3
139.7
114.3
88.9
76.1
139.7
114.3
88.9
76.1
168.3
139.7
133.0
114.3
108.0
193.7
168.3
159.0
139.7
133.0
114.3
108.0
88.9
168.3
139.7
114.3
88.9
168.3
139.7
114.3
88.9
219.1
193.7
168.3
159.0
139.7
133.0
4.0
4.0
3.6
3.6
3.2
2.9
2.9
2.9
4.0
4.0
3.6
3.6
3.2
2.9
2.9
6.3
6.3
5.6
5.0
10.0
8.8
8.0
7.1
4.5
4.0
4.0
3.6
3.6
5.6
4.5
4.5
4.0
4.0
3.6
3.6
3.2
7.1
6.3
6.3
5.6
11.0
10.0
8.8
8.0
6.3
6.3
4.5
4.5
4.0
4.0
Length
Weight
Tube
conc/ecc
approx. kg
outside
L mm
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
152
178
178
178
178
178
178
2.39
2.39
2.39
2.39
2.39
2.39
2.39
2.39
2.55
2.55
2.55
2.55
2.55
2.55
2.55
3.95
3.95
3.95
3.95
5.98
5.98
5.98
5.98
3.95
3.95
3.95
3.95
3.95
5.03
5.03
5.03
5.03
5.03
5.03
5.03
5.03
6.32
6.32
6.32
6.32
9.68
9.68
9.68
9.68
7.36
7.36
7.36
7.36
7.36
7.36
s2
s1
WT
Tube
d1 mm
s1 mm
d2 mm
273.0
6.3
219.1
193.7
168.3
159.0
139.7
133.0
114.3
108.0
219.1
168.3
139.7
114.3
219.1
168.3
139.7
114.3
273.0
219.1
193.7
168.3
159.0
139.7
273.0
219.1
168.3
139.7
273.0
219.1
168.3
139.7
323.9
273.0
219.1
168.3
323.9
273.0
219.1
168.3
323.9
273.0
219.1
168.3
8.8
14.2
323.9
7.1
10.0
16.0
355.6
WT
outside
8.0
11.0
17.5
s2 mm
6.3
6.3
4.5
4.5
4.0
4.0
3.6
3.6
8.0
7.1
6.3
6.3
12.5
11.0
10.0
8.8
6.3
6.3
5.6
4.5
4.5
4.0
8.0
8.0
7.1
6.3
14.2
12.5
11.0
10.0
7.1
6.3
6.3
4.5
10.0
8.8
8.0
7.1
16.0
14.2
12.5
11.0
Length
Weight
conc/ecc
approx. kg
L mm
178
178
178
178
178
178
178
178
178
178
178
178
178
178
178
178
203
203
203
203
203
203
203
203
203
203
203
203
203
203
330
330
330
330
330
330
330
330
330
330
330
330
7.36
7.36
7.36
7.36
7.36
7.36
7.36
7.36
10.2
10.2
10.2
10.2
16.1
16.1
16.1
16.1
11.1
11.1
11.1
11.1
11.1
11.1
15.7
15.7
15.7
15.7
24.5
24.5
24.5
24.5
22.6
22.6
22.6
22.6
30.8
30.8
30.8
30.8
48.1
48.1
48.1
48.1
169
d1
Reducer
DIN 2616
30.11.2007
10:30 Uhr
Seite 170
d2
d1
d2
i.d.2
i.d.1
d1
Reducer
DIN 2616
s2
s1
Tube
WT
outside
d1 mm
406.4
s1 mm
8.8
12.5
20.0
419.0
10.0
457.0
10.0
14.2
22.2
170
Tube
WT
outside
Length
Weight
Tube
conc/ecc
approx. kg
outside
d2 mm
s2 mm
L mm
355.6
323.9
273.0
219.1
355.6
323.9
273.0
219.1
355.6
323.9
273.0
219.1
368.0
355.6
323.9
273.0
267.0
219.1
419.0
406.4
355.6
323.9
273.0
219.1
406.4
355.6
323.9
273.0
406.4
355.6
323.9
273.0
8.0
7.1
6.3
6.3
11.0
10.0
8.8
8.0
17.5
16.0
14.2
12.5
8.0
8.0
7.1
6.3
6.3
6.3
10.0
8.8
8.0
7.1
6.3
6.3
12.5
11.0
10.0
8.8
20.0
17.5
16.0
14.2
355
355
355
355
355
355
355
355
355
355
355
355
355
355
355
355
355
355
381
381
381
381
381
381
381
381
381
381
381
381
381
381
30.6
30.6
30.6
30.6
42.9
42.9
42.9
42.9
67.8
67.8
67.8
67.8
35.8
35.8
35.8
35.8
35.8
35.8
41.9
41.9
41.9
41.9
41.9
41.9
59.0
59.0
59.0
59.0
90.6
90.6
90.6
90.6
s2
s1
WT
Tube
WT
outside
Length
d1 mm
s1 mm
d2 mm
s2 mm
L mm
508.0
11.0
457.0
406.4
355.6
323.9
273.0
219.1
457.0
406.4
355.6
323.9
273.0
219.1
457.0
406.4
355.6
323.9
273.0
219.1
508.0
457.0
406.4
355.6
323.9
508.0
457.0
406.4
355.6
323.9
508.0
457.0
406.4
355.6
323.9
10.0
8.8
8.0
7.1
6.3
6.3
14.2
12.5
11.0
10.0
8.8
8.0
22.2
20.0
17.5
16.0
14.2
12.5
11.0
10.0
8.8
8.0
7.1
16.0
14.2
12.5
11.0
10.0
25.0
22.2
20.0
17.5
16.0
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
508
16.0
25.0
610.0
12.5
17.5
30.0
Weight
conc/ecc approx. kg
68.5
68.5
68.5
68.5
68.5
68.5
98.5
98.5
98.5
98.5
98.5
98.5
151
151
151
151
151
151
93.4
93.4
93.4
93.4
93.4
130
130
130
130
130
217
217
217
217
217
30.11.2007
10:30 Uhr
Seite 171
Caps
DIN 2617
Wallthickness
Height
OD
Row 3
Row 4
Row 5
D mm
s mm
s mm
s mm
h approx. mm
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
168.3
219.1
273.0
323.9
355.6
406.4
457.0
508.0
610.0
2.0
2.3
2.6
2.6
2.6
2.9
2.9
3.2
3.6
4.0
4.5
6.3
6.3
7.1
8.0
8.8
10.0
11.0
12.5
3.2
3.2
3.2
3.6
4.0
4.5
5.0
5.6
6.3
6.3
7.1
8.0
8.8
10.0
11.0
12.5
14.2
16.0
17.5
4.0
4.0
4.0
4.0
5.0
5.6
7.1
8.0
8.8
10.0
11.0
12.5
14.2
16.0
17.5
20.0
22.0
25.0
30.0
25
25
38
38
38
38
38
51
64
76
89
102
127
152
165
178
203
229
267
Tube
Weight
Row 3
Row 4
Row 5
approx. kg
approx. kg
approx. kg
0.06
0.07
0.09
0.11
0.20
0.28
0.34
0.53
1.00
1.14
2.65
5.55
8.00
9.90
13.50
18.20
26.00
38.00
60.80
0.10
0.11
0.13
0.14
0.22
0.30
0.50
0.70
1.50
1.60
3.55
6.70
8.80
14.00
18.50
26.60
38.50
54.00
83.00
0.13
0.14
0.15
0.16
0.23
0.34
0.71
0.95
1.72
2.86
5.30
10.35
14.00
22.50
29.50
42.50
60.00
84.00
143.00
171
30.11.2007
10:30 Uhr
Seite 172
Threaded Fittings
ASME B 16.11
DN
Nom.
Centre to End
Centre to End
Outside Diameter
Minimum Wall
Pipe
45 Elbow
of Band
Thickness
Length of
Thread
Size
Min.(1)
2000
3000
6000
2000
3000
6000
2000
3000
6000
2000
3000
6000
L2
1/8
21
21
25
17
17
19
22
22
25
3.18
3.18
6.35
6.4
6.7
1/4
21
25
28
17
19
22
22
25
33
3.18
3.30
6.60
8.1
10.2
10
3/8
25
28
33
19
22
25
25
33
38
3.18
3.51
6.98
9.1
10.4
15
1/2
28
33
38
22
25
28
33
38
46
3.18
4.09
8.15
10.9
13.6
20
3/4
33
38
44
25
28
33
38
46
56
3.18
4.32
8.53
12.7
13.9
25
38
44
51
28
33
35
46
56
62
3.68
4.98
9.93
14.7
17.3
32
1-1/4
44
51
60
33
35
43
56
62
75
3.89
5.28
10.59
17.0
18.0
40
1-1/2
51
60
64
35
43
44
62
75
84
4.01
5.56
11.07
17.8
18.4
50
60
64
83
43
44
52
75
84
102
4.27
7.14
12.09
19.0
19.2
65
2-1/2
76
83
95
52
52
64
92
102
121
5.61
7.65
15.29
23.6
28.9
80
86
95
106
64
64
79
109
121
146
5.99
8.84
16.64
25.9
30.5
100
106
114
114
79
79
79
146
152
152
6.55
11.18
18.67
27.7
33.0
1. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with
fully normed roots and flat crests) shall not be less than L2 (effective length of external thread)
required by American National Standard for Pipe Threads (ANSI/ASME B1.20.1).
172
30.11.2007
10:30 Uhr
Seite 173
Threaded Fittings
ASME B 16.11
DN
Nom.
End to End
End to End
Outside
Pipe
Couplings
Couplings
Diameter
Size
1/8
End Wall
Length of
Thickness
Thread
Min.
Min.(1)
3000&6000
3000
6000
3000
6000
3000
6000
L2
32
19
...
16
22
4.8
...
6.4
6.7
1/4
35
25
27
19
25
4.8
6.4
8.1
10.2
10
3/8
38
25
27
22
32
4.8
6.4
9.1
10.4
15
1/2
48
32
33
28
38
6.4
7.9
10.9
13.6
20
3/4
51
37
38
35
44
6.4
7.9
12.7
13.9
25
60
41
43
44
57
9.7
11.2
14.7
17.3
32
1-1/4
67
44
46
57
64
9.7
11.2
17.0
18.0
40
1-1/2
79
44
48
64
76
11.2
12.7
17.8
18.4
50
86
48
51
76
92
12.7
15.7
19.0
19.2
65
2-1/2
92
60
64
92
108
15.7
19.0
23.6
28.9
80
108
65
68
108
127
19.0
22.4
25.9
30.5
100
121
68
75
140
159
22.4
28.4
27.7
33.0
1. Dimension B is minimum length of perfect thread. The length of useful thread (B plus threads with
fully normed roots and flat crests) shall not be less than L2 (effective length of external thread)
required by American National Standard for Pipe Threads (ANSI/ASME B1.20.1).
2. Class 2000 and NPS 1/8 (DN6) class 6000 couplings, half couplings, and caps are not included in
this standard.
173
Dimensions in mm
30.11.2007
10:30 Uhr
Seite 174
90Elbow
(Swage)
Reducing Nipple
90 Elbow
Tee and
Reducing Tee
45 Elbow
45 Elbow
Coupling and
Reducing Coupling
Cross
Cap
Half Coupling
Tee and
Reducing Tee
Cross
Threaded End 90
Union Tee
Street Elbow
Coupling and
Reducing Coupling
Threaded End
Union Tee
Bushing
Half Coupling
Hex, Nipple and
Reducing Nipple
Cap
Square Head Plug
Union
Threadolet
Weldolet
174
Union with
inserted or
integral Seat
Sockolet
30.11.2007
10:30 Uhr
Seite 175
Slip-on
Lap Joint
Threaded
Blind
Socket Welding
Slip-on Orifice
(raised face)
Threaded Orifice
(raised face)
Welding Neck
175
30.11.2007
10:30 Uhr
Seite 176
Threaded Fittings
ASME B 16.11
SQUARE HEAD
PLUG
HEX HEAD
PLUG
ROUND HEAD
PLUG
HEX HEAD(1)
BUSHING
FLUSH
BUSHING
Dimensions in mm
DN
Nom.
Length
Height of
Width
Nominal
Length
Width
Pipe
(Min.)
Square
Flats
Diameter
(Min.)
Flats
(Min.)
(Min.)
of Head
Size
Plug
(Nom.)
1/8
10
10
35
11
...
1/4
11
10
14
41
16
10
3/8
13
11
18
41
18
15
1/2
14
10
14
21
44
22
20
3/4
16
11
16
27
44
27
10
25
19
13
21
33
51
36
10
32
1-1/4
21
14
24
43
51
46
14
40
1-1/2
21
16
28
48
51
50
16
50
22
18
32
60
64
65
18
65
2-1/2
27
19
36
73
70
75
10
19
80
28
21
41
89
70
90
10
21
100
32
25
65
114
76
115
13
25
176
30.11.2007
10:30 Uhr
Seite 177
Threaded Union
MSS SP-83
Fittings & Flanges
H-Threads
Minimum 4 Full Threads
EngagementClass 2A/B Fit
Dimensions in mm
Nom.
Pipe
Size
Pipe
End
Wall
Min.
A
Min.
C
Water
Way
Bore
D
Male
Flange
Nut
Bearing
Min.
G
Theads
Per
25.4 mm
Max.
H
Min.
F
Length
Assem.
Nom.
Clear
Assem.
Nut
Min.
J
1/8
14.7
2.41
6.83
6.43
3.17
3.2
16
1.24
41.4
49.0
1/4
19.0
3.02
9.85
9.45
3.17
3.2
16
1.24
41.4
49.0
3/8
22.9
3.20
13.92
13.51
3.43
3.4
14
1.37
46.0
55.0
1/2
27.7
3.73
17.47
17.07
3.68
3.7
14
1.50
49.0
57.0
3/4
33.5
3.91
21.79
21.39
4.06
4.1
11
1.68
56.9
67.0
41.4
4.55
28.14
27.74
4.57
4.4
11
1.85
62.0
79.0
1-1/4
50.5
4.85
35.76
35.36
5.33
5.2
11
2.13
71.1
94.0
1-1/2
57.2
5.08
41.61
41.20
5.84
5.6
10
2.31
76.4
111.0
70.1
5.54
52.53
52.12
6.60
6.4
10
2.69
86.1
132.0
2-1/2
85.3
7.01
64.72
64.31
7.49
7.1
3.07
102.4
148.0
102.4
7.62
77.67
77.27
8.25
8.0
3.53
109.0
175.0
177
30.11.2007
10:30 Uhr
Seite 178
Socket-Welding Fittings
ASME B16-11
Dimensions in mm
Bore Diameter of
Nom.
DN
Socket
Bore
Size
Dia.(2)
Class Designation
3000
6000
Pipe
Fitting (2)
Class Designation
9000
3000
Depth
G
Class Designation
6000
9000
Ave.
Min.
Ave.
Min.
of
Ave.
Min.
Socket
3000
6000
9000
Min.
Min.
Min.
Min.
1/8
11.2
10.8
7.6
6.1
4.8
3.2
3.18
3.18
3.96
3.43
2.41
3.15
9.5
1/4
14.6
14.2
10.0
8.5
7.1
5.6
3.78
3.30
4.60
4.01
3.02
3.68
9.5
10
3/8
18.0
17.6
13.3
11.8
9.9
8.4
4.01
3.50
5.03
4.37
3.20
4.01
9.5
15
1/2
22.2
21.8
16.6
15.0
12.5
11.0
7.2
5.6
4.67
4.09
5.97
5.18
9.35
8.18
3.73
4.78
7.47
9.5
20
3/4
27.6
27.2
21.7
20.2
16.3
14.8
11.8
10.3
4.90
4.27
6.96
6.04
9.78
8.56
3.91
5.56
7.82
12.5
25
34.3
33.9
27.4
25.9
21.5
19.9
16.0
14.5
5.69
4.98
7.92
6.93
11.38
9.96
4.55
6.35
9.09
12.5
32
1-1/4
43.1
42.7
35.8
34.3
30.2
28.7
23.5
22.0
6.07
5.28
7.92
6.93
12.14
10.62
4.85
6.35
9.70
12.5
40
1-1/2
49.2
48.8
41.6
40.1
34.7
33.2
28.7
27.2
6.35
5.54
8.92
7.80
12.7
11.12
5.08
7.14
10.15
12.5
50
61.7
61.2
53.3
51.7
43.6
42.1
38.9
37.4
6.93
6.04
10.92
9.50
13.84
12.12
5.54
8.74
11.07
16.0
65
2-1/2
74.4
73.9
64.2
61.2
8.76
7.67
7.01
16.0
80
90.3
89.8
79.4
76.4
9.52
8.30
7.62
16.0
100
115.7
115.2
103.8
100.7
10.69
9.35
8.56
19.0
Notes:
1. Average of Socket Wall Thickness around periphery shall be no less than listed values. The minimum values are permitted
in localized areas.
2. Upper and lower values for each size are the respective maximum and minimum dimensions.
178
30.11.2007
10:30 Uhr
Seite 179
Socket-Welding Fittings
ASME B16-11
DN
Nom.
90 Elbows
Pipe
Tees, Crosses
Size
Class Designation
3000
6000
Laying Lengths
45 Elbows
9000
Tolerances
End Wall
Half
C-lings
C-lings
Thickness
A
K Min.
Class Designation
3000
6000
9000
Class Designation
E
3000
6000
9000
1/8
11.0
11.0
8.0
8.0
6.5
16.0
1.0
1.5
1.0
4.8
6.4
1/4
11.0
13.5
8.0
8.0
6.5
16.0
1.0
1.5
1.0
4.8
6.4
10
3/8
13.5
15.5
8.0
11.0
6.5
17.5
1.5
3.0
1.5
4.8
6.4
15
1/2
15.5
19.0
25.5
11.0
12.5
15.5
9.5
22.5
1.5
3.0
1.5
6.4
7.9
11.2
20
3/4
19.0
22.5
28.5
13.0
14.0
19.0
9.5
24.0
1.5
3.0
1.5
6.4
7.9
12.7
25
22.5
27.0
32.0
14.0
17.5
20.5
12.5
28.5
2.0
4.0
2.0
9.6
11.2
14.2
32
1-3/4
27.0
32.0
35.0
17.5
20.5
22.5
12.5
30.0
2.0
4.0
2.0
9.6
11.2
14.2
40
1-1/2
32.0
38.0
38.0
20.5
25.5
25.5
12.5
32.0
2.0
4.0
2.0
11.2
12.7
15.7
50
38.0
41.0
54.0
25.5
28.5
28.5
19.0
41.0
2.0
4.0
2.0
12.7
15.7
19.0
65
2-1/2
41.0
28.5
19.0
43.0
2.5
5.0
2.5
15.7
19.0
80
57.0
32.0
19.0
44.5
2.5
5.0
2.5
19.0
22.4
100
66.5
41.0
19.0
48.0
2.5
5.0
2.5
22.4
28.4
Notes:
1. Average of Socket Wall Thickness around periphery shall be no less than listed values. The minimum values are permitted
in localized areas.
2. Upper and lower values for each size are the respective maximum and minimum dimensions.
179
Dimensions in mm
30.11.2007
10:30 Uhr
Seite 180
Dimensions in mm
Socket
Nom.
Type (2)
Dia
Pipe
Size
Laying
Depth Shank
Bore
Wall
Length
Min.
Dia.
3M
6M
SD
3M
D
6M
Length
Min.
3M
C
6M
3M
SL
6M
3M
RL (Min.)
6M
3M
6M
3/8
1/4
14.35
10
17.15
19
21
9.0
6.5
3.78
4.60
14
16
1/2
3/8
17.78
10
21.34
21
23
12.5
9.0
4.01
5.03
16
16
1/2
1/4
14.35
10
21.34
21
21
9.0
6.5
3.78
4.60
16
16
3/4
1/2
21.97
10
26.67
22
25
16.0
11.5
4.67
5.97
17
19
3/4
3/8
17.78
10
26.67
16
22
12.5
9.0
4.01
5.03
3/4
1/4
14.35
10
26.67
18
22
9.0
6.5
3.78
4.60
3/4
27.31
13
33.49
24
28
21.0
15.5
4.90
6.96
1/2
21.97
10
33.40
16
28
16.0
11.5
4.67
5.97
3/8
17.78
10
33.40
18
22
12.5
9.0
4.01
5.03
28
33
1/4
14.35
10
33.40
19
24
9.0
6.5
3.78
4.60
28
33
35
19
27
27
19
21
21
32
21
28
1-1/4 x
34.04
13
42.16
25
30
26.5
20.5
5.69
7.92
1-1/4 x
3/4
27.31
13
42.16
18
21
21.0
15.5
4.90
6.96
32
1-1/4 x
1/2
21.97
10
42.16
19
22
16.0
11.5
4.67
5.97
32
35
1-1/4 x
3/8
17.78
10
42.16
21
24
12.5
9.0
4.01
5.03
32
35
1-1/4 x
1/4
14.35
10
42.16
22
25
9.0
6.5
3.78
4.60
32
35
1-1/2 x
1-1/4
42.80
13
48.26
28
35
35.0
29.5
6.07
7.92
22
22
25
1-1/2 x
34.04
13
48.26
18
29
26.5
20.5
5.69
7.92
1-1/2 x
3/4
27.31
13
48.26
19
25
21.0
15.5
4.90
6.96
25
33
40
1-1/2 x
1/2
21.97
10
48.26
21
27
16.0
11.5
4.67
5.97
33
40
1-1/2 x
3/8
17.78
10
48.26
22
28
12.5
9.0
4.01
5.03
33
40
48.90
13
60.32
32
39
41.0
34.0
6.35
8.9
25
33
1-1/2
28
1-1/4
42.80
13
60.32
21
24
35.0
29.5
6.07
7.92
38
41
34.04
13
60.32
22
25
26.5
21.0
5.69
7.92
38
41
3/4
27.31
13
60.32
24
27
21.0
15.5
4.90
6.96
38
41
1/2
21.97
10
60.32
25
28
16.0
11.5
4.67
5.97
38
41
1. At the option of the manufacturer Type 2 Reducers may be furnished in Type 1 configuration.
2. 3M & 6M symbols denote 3000 and 6000 classes.
180
30.11.2007
10:30 Uhr
Seite 181
Socket
Nom.
Type (2)
Dia
Pipe
Size
3M
6M
Laying
Depth Shank
Min.
Dia.
SD
Bore
Wall
Length
Length
Min.
3M
6M
3M
43
52.5
C
6M
RL (Min.)
3M
6M
3M
6M
6.93
10.92
38
32
3M
2-1/2 x 2
61.37
16
73.02
46
2-1/2 x 1-1/2
48.90
13
73.02
35
41.0
6.35
2-1/2 x 1-1/4
42.80
13
73.02
37
35.0
6.07
54
2-1/2 x 1
34.04
13
73.02
38
26.5
5.69
54
2-1/2 x 3/4
3 x 2-1/2
27.31
13
73.02
40
21.0
4.90
74.07
16
88.90
38
62.5
8.76
61.37
16
88.90
25
52.5
6.93
48
48.90
13
88.90
29
41.0
6.35
48
54
32
3 x 1-1/4
42.80
13
88.90
30
35.0
6.07
48
3 x 1
34.04
13
88.90
32
26.5
5.69
48
4 x 3
90.04
16
114.30
33
78.0
9.5
60
4 x 2-1/2
74.07
16
114.30
38
62.5
8.76
60
61.37
16
114.30
38
52.5
6.93
60
4 x 2
6M
54
3 X 2
3 x 1-1/2
43.0
SL
4 x 1-1/2
48.90
13
114.30
42
41.0
6.35
60
4 x 1-1/4
42.80
13
114.30
43
35.0
6.07
60
1. At the option of the manufacturer Type 2 Reducers may be furnished in Type 1 configuration.
2. 3M & 6M symbols denote 3000 and 6000 classes.
TOLERANCES
Laying length A-
Laying length B-
+ 2.0 mm / - 0.0 mm
+ 2.5 mm / - 0.0 mm
0.25 mm
+ 0.4 mm / - 0.25 mm
Bore D
-Sizes 1/4"
thru2"
0.8 mm
Shank Dia SD
-Sizes 2-1/2"
-Sizes 3/8"
-Sizes 2"
thru3"
thru1-1/2"
thru 3"
1.5 mm
0.50 mm
0.75 mm
Shank Lg. SL
-Sizes 3/8"
thru3/4"
+ 0.0 mm/-1.5 mm
-Sizes 1"
thru2"
+ 0.0 mm/-2.0 mm
-Sizes 2-1/2"
thru4"
+ 0.0 mm/-2.5 mm
-Sizes 4"
0.75 mm
181
Dimensions in mm
30.11.2007
10:30 Uhr
Seite 182
Socket-Welding Union
MSS SP-83
H-Threads
Minimum 4 Full Threads
Engagement Class 2A/B Fit
Dimensions in mm
Nom.
Pipe
Size
Pipe
End
Min.
A
Socket
Bore
Dia
B
Socket
Wall
Min.
C
Water
Way
Bore
Laying
Length
Male
Flange
Nut
Bearing
Min.
G
Thrds
Per
25.4 mm
Max.
H
Min.
F
Length
Assem.
Nom.
Clear
Assem.
Nut
Min.
J
Depth
of
Socket
Min.
K
1/8
21.8
10.92
10.67
3.17
6.83
6.43
22.4
19.0
3.17
3.17
16
1.24
9.6
41.4
49.0
1/4
21.8
14.22
13.97
3.30
9.85
9.45
22.4
19.0
3.17
3.17
16
1.24
9.6
41.4
49.0
3/8
25.9
17.78
17.53
3.48
13.92
13.51
26.9
20.6
3.43
3.43
14
1.37
9.6
46.0
55.0
1/2
31.2
21.84
21.59
4.06
17.47
17.07
26.9
20.6
3.68
3.68
14
1.50
9.6
49.0
57.0
3/4
37.1
27.18
26.92
4.27
21.79
21.39
31.8
25.4
4.06
4.06
11
1.68
12.7
56.9
67.0
45.5
34.04
33.78
4.95
28.14
27.74
34.3
26.2
4.57
4.44
11
1.85
12.7
62.0
79.0
1-1/4
54.9
42.67
42.42
5.28
35.76
35.36
4.06
32.5
5.33
5.21
11
2.13
12.7
71.1
94.0
1-1/2
61.5
48.77
48.51
5.54
5.54
41.61
41.20
42.2
34.0
5.84
5.59
10
2.31
12.7
76.5
111.0
75.2
61.47
61.21
6.05
52.53
52.12
45.5
37.3
6.60
6.35
10
2.69
15.8
86.1
132.0
2-1/2
91.7
74.17
73.66
7.65
64.72
64.31
61.7
52.1
7.49
7.11
3.07
15.8
102.4
148.0
109.2
90.17
89.66
8.31
77.67
77.27
63.8
53.6
8.25
8.00
3.53
15.8
109.0
175.0
182
30.11.2007
10:30 Uhr
Seite 183
Boss
THREADED
Dimensions in Millimeters
Size
(in)
SOCKET-WELDING
Dimensions in Millimeters
L2
(Min)
Size
(in)
3000Lbs
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
22.1
25.9
34.0
39.1
48.0
59.9
65.0
80.0
39.9
50.0
50.0
50.0
50.0
50.0
50.0
59.9
10.0
10.5
13.5
14.0
17.5
18.0
18.5
19.0
6000Lbs
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
25.9
36.0
43.9
50.0
59.9
65.0
80.0
95.0
39.9
50.0
50.0
50.0
50.0
50.0
50.0
59.9
10.0
10.5
13.5
14.0
17.5
18.0
18.5
19.0
J
(Min)
3000Lbs
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
14.3
17.8
21.9
27.3
34.0
42.8
48.9
61.3
9.2
12.5
15.8
20.9
26.6
35.0
40.9
52.6
9.9
10.9
13.0
14.0
16.0
18.0
19.1
22.1
39.9
50.0
50.0
50.0
50.0
50.0
50.0
59.9
22.3
26.5
34.2
39.5
46.3
55.2
65.1
80.2
6000Lbs
1/2
3/4
1
1-1/4
1-1/2
2
21.9
27.3
34.0
42.8
48.9
61.3
11.7
15.5
20.7
29.4
33.9
42.8
14.0
16.0
18.0
19.1
22.0
25.9
50.0
50.0
50.0
50.0
50.0
59.5
43.3
49.1
56.0
65.2
80.1
95.1
183
30.11.2007
10:30 Uhr
Seite 184
Swaged Nipples
MSS SP-95
Concentric
Eccentric
Dimensions in Millimeters
Nominal
Pipe
Size
(NPS)
1/4 x 1/8
3/8 x 1/8
3/8 x 1/4
1/2 x 1/8
1/2 x 1/4
1/2 x 3/8
3/4 x 1/8
3/4 x 1/4
3/4 x 3/8
3/4 x 1/2
1 x 1/8
1 x 1/4
1 x 3/8
1 x 1/2
1 x 3/4
1-1/4 x 1/8
1 1/4 x 1/4
1-1/4 x 3/8
1-1/4 x 1/2
1-1/4 x 3/4
1-1/4 x 1
1-1/2 x 1/8
1-1/2 x 1/4
1-1/2 x 3/8
1-1/2 x 1/2
1-1/2 x 3/4
1-1/2 x 1
1-1/2 x 1-1/4
184
Outside Diameter
Large
Small
End
End
D1
D2
End
To
End
"A"
Nominal
Pipe
Size
(NPS)
13.7
17.1
17.1
21.3
21.3
21.3
26.7
26.7
26.7
26.7
33.4
33.4
33.4
33.4
33.4
42.2
42.2
42.2
42.2
42.2
42.2
48.3
48.3
48.3
48.3
48.3
48.3
48.3
57
64
64
70
70
70
76
76
76
76
89
89
89
89
89
102
102
102
102
102
102
114
114
114
114
114
114
114
2 x 1/8
2 x 1/4
2 x 3/8
2 x 1/2
2 x 3/4
2x1
2 x 1-1/4
2 x 1-1/2
2-1/2 x 1/8
2-1/2 x 1/4
2-1/2 x 3/8
2-1/2 x 1/2
2-1/2 x 3/4
2-1/2 x 1
2-1/2 x 1-1/4
2-1/2 x 1-1/2
2-1/2 x 2
3 x 1/8
3 x 1/4
3 x 3/8
3 x 1/2
3 x 3/4
3x1
3 x 1-1/4
3 x 1-1/2
3x2
3 x 2-1/2
3-1/2 x 1/8
10.3
10.3
13.7
10.3
13.7
17.1
10.3
13.7
17.1
21.3
10.3
13.7
17.1
21.3
26.7
10.3
13.7
17.1
21.3
26.7
33.4
10.3
13.7
17.1
21.3
26.7
33.4
42.2
Outside Diameter
Large
Small
End
End
D1
D2
End
To
End
"A"
60.3
60.3
60.3
60.3
60.3
60.3
60.3
60.3
73.0
73.0
73.0
73.0
73.0
73.0
73.0
73.0
73.0
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
88.9
101.6
165
165
165
165
165
165
165
165
178
178
178
178
178
178
178
178
178
203
203
203
203
203
203
203
203
203
203
203
10.3
13.7
17.1
21.3
26.7
33.4
42.2
48.3
10.3
13.7
17.1
21.3
26.7
33.4
42.2
48.3
60.3
10.3
13.7
17.1
21.3
26.7
33.4
42.2
48.3
60.3
73.0
10.3
30.11.2007
10:30 Uhr
Seite 185
Swaged Nipples
MSS SP-95
Concentric
Nominal
Pipe
Size
(NPS)
3-1/2 x 1/4
3-1/2 x 3/8
3-1/2 x 1/2
3-1/3 x 3/4
3-1/2 x 1
3-1/2 x 1-1/4
3-1/2 x 1-1/2
3-1/2 x 1
3-1/2 x 2-1/2
3-1/2 x 3
4 x 1/4
Eccentric
Outside Diameter
Large
Small
End
End
D1
D2
End
To
End
"A"
Nominal
Pipe
Size
(NPS)
Outside Diameter
Large
Small
End
End
D1
D2
End
To
End
"A"
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
101,6
114,3
203
203
203
203
203
203
203
203
203
203
229
4 x 3/8
4 x 1/2
4 x 3/4
4x1
4 x 1-1/4
4 x 1-1/2
4x2
4 x 2-1/2
4x3
4 x 3-1/2
114,3
114,3
114,3
114,3
114,3
114,3
114,3
114,3
114,3
114,3
229
229
229
229
229
229
229
229
229
229
13,7
17,1
21,3
26,7
33,4
42,2
48,3
60,3
73,0
88,9
13,7
17,1
21,3
26,7
33,4
42,2
48,3
60,3
73,0
88,9
101,6
TOLERANCES
Outside Diameter at End
Square Cut
Other End
Ends
Connections
(mm)
(mm)
Nominal
Pipe Size
(NPS)
Overall
length
(mm)
1/8 - 3/8
1/2 - 1-1/2
2 - 2-1/2
+ 0.40
- 0.80
+ 0.40
- 0.80
0.80
3-4
0.80
Wall
Thickness
(see Note 1)
0.80
+ 1.50
- 0.80
+ 1.50
- 0.80
1.50
Not
less than
87.5% of
nominal
wall
Thickness
Dimensions in Millimeters.
Note 1: Prior to threading or grooving
185
Dimensions in Millimeters
30.11.2007
10:30 Uhr
Seite 186
Weight List
(Unit kg)
WEIGHT (KGS) SIZE
1/8"
1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
2000LBS SCREWED
90 ELBOW
45 ELBOW
TEE
0.10
0.08
0.13
0.08
0.06
0.12
0.13
0.10
0.15
0.22
0.20
0.31
0.32
0.27
0.43
0.47
0.41
0.61
0.74
0.64
0.95
0.93
0.75
1.25
1.53
1.19
1.93
2.98
3.46
4.11
4.54
5.44
6.12
10.21
8.9
14.74
3000LBS SCREWED
90 ELBOW
45 ELBOW
TEE
COUPLING
HALF COUPLING
RED-COUPLING
CAP
STREET ELBOW
UNION
0.10
0.08
0.13
0.05
0.03
0.05
0.04
0.10
0.28
0.14
0.12
0.13
0.05
0.03
0.05
0.04
0.14
0.28
0.27
0.24
0.38
0.06
0.03
0.06
0.05
0.27
0.28
0.41
0.34
0.56
0.13
0.06
0.13
0.11
0.41
0.31
0.72
0.54
0.84
0.19
0.10
0.19
0.18
0.66
0.46
1.03
0.92
1.70
0.39
0.20
0.39
0.35
0.97
0.67
1.31
0.97
1.95
0.68
0.34
0.68
0.60
1.31
1.03
2.21
1.84
3.18
0.99
0.50
0.99
0.70
2.21
1.51
2.47
1.93
3.63
1.37
0.68
1.37
1.06
2.47
2.43
4.53
3.46
6.24
2.07
1.03
2.07
1.84
7.77
5.44
9.53
3.08
1.54
3.08
2.65
13.27
8.96
17.24
5.44
2.72
5.44
4.57
3.48
5.25
12
0.17
0.11
0.20
0.08
0.04
0.08
0.06
0.30
0.27
0.42
0.06
0.04
0.06
0.06
0.45
0.39
0.63
0.18
0.09
0.18
0.09
0.72
0.61
0.98
0.31
0.16
0.31
0.14
1.15
1.02
1.65
0.41
0.20
0.41
0.20
1.61
1.17
2.19
0.85
0.43
0.85
0.34
2.67
2.67
3.52
1.05
0.53
1.05
0.59
3.20
2.61
4.42
1.87
0.91
1.81
0.77
5.90
4.37
7.88
3.40
1.70
3.40
1.47
9.88
7.01
13.11
4.20
2.10
4.20
16.43
14.16
22.50
6.10
3.05
6.10
10.04
5.02
10.04
0.01
0.03
0.05
0.01
0.03
0.05
0.07
0.01
0.05
0.07
0.12
0.03
0.09
0.14
0.20
0.05
0.16
0.25
0.34
0.09
0.27
0.47
0.55
0.25
0.38
0.62
0.72
0.34
0.63
1.10
1.41
0.45
0.96
1.73
2.21
0.60
1.53
2.15
3.26
1.16
3.83
5.90
6.01
3.20
0.10
0.06
0.09
0.05
0.05
0.05
0.04
0.28
0.10
0.09
0.15
0.07
0.07
0.07
0.05
0.28
0.22
0.20
0.32
0.13
0.13
0.13
0.10
0.31
0.31
0.26
0.42
0.19
0.19
0.19
0.16
0.46
0.53
0.40
0.65
0.27
0.27
0.27
0.22
0.67
0.72
0.64
0.99
0.49
0.49
0.49
0.41
1.03
0.97
0.77
1.35
0.59
0.59
0.59
0.51
1.51
1.71
1.22
2.07
0.97
0.97
0.97
0.85
2.43
3.80
3.57
3.90
1.42
1.42
1.42
1.24
3.48
5.50
5.10
5.90
1.88
1.88
1.88
1.94
5.25
10.95
9.41
14.20
3.31
3.31
3.31
3.31
12
0.40
0.30
0.54
0.24
0.24
0.24
0.19
0.63
0.57
0.88
0.33
0.33
0.33
0.26
1.19
0.88
1.44
0.65
0.65
0.65
0.53
1.36
1.11
1.85
0.75
0.75
0.75
0.64
2.41
2.01
3.27
1.20
1.20
1.20
0.97
2.72
2.15
3.60
2.12
2.12
2.12
1.64
4.75
4.05
6.94
2.86
2.86
2.86
2.22
8.55 14.31
6.02 11.17
10.61 16..92
4.01
6.35
4.01
6.35
4.01
6.35
3.45
6.03
186
30.11.2007
10:30 Uhr
Seite 187
Weldolets
Outlet
size
in
Nominal run
pipe size
in
Dimensions
A
mm
B
mm
C
mm
D
mm
Weight
kg
1/8
1/4
3/8
3/8 to 36
3/8 to 36
1/2 to 36
14.3
14.3
19.1
25.4
5.4
31.8
15.9
15.9
19.1
0.04
0.04
0.07
1/2
3/4
1
1/2 to 36
3/4 to 36
1 to 36
19.1
22.2
27.0
34.9
41.3
50.8
23.8
30.2
36.5
15.9
20.6
26.2
0.07
0.11
0.18
1-1/4
1-1/2
2
1-1/4 to 36
1-1/2 to 36
2 to 36
31.8
33.3
38.1
60.3
73.0
88.9
44.5
50.8
65.1
34.9
41.3
52.4
0.32
0.36
0.68
2-1/2
3
4
2-1/2 to 36
3 to 36
4 to 36
41.3
44.5
50.8
103.2
122.2
152.4
76.2
93.7
120.7
61.9
77.8
101.6
1.02
1.70
3.04
5
6
8
5 to 36
6 to 36
8 to 36
54.0
60.3
69.9
181.0
215.9
263.5
147.6
169.9
220.7
128.6
154.0
201.6
3.8
5.58
9.53
10
12
10 to 36
12 to 36
77.8
85.7
319.1
377.8
274.6
325.8
254.0
304.8
15.88
26.30
1/2 to 24
3/4 to 24
1 to 24
28.6
31.8
38.1
34.9
44.5
50.8
14.3
19.1
25.4
0.11
0.32
0.38
1-1/4
1-1/2
2
1-1/4 to 24
1-1/2 to 24
2 to 24
44.5
50.8
55.6
61.9
69.9
81.0
33.3
38.1
42.9
0.57
0.79
0.97
2-1/2
3
4
2-1/2 to 24
3 to 24
4 to 24
61.9
73.0
84.1
96.8
120.7
152.4
54.0
73.0
98.4
1.53
2.87
4.76
5
6
8
5 to 24
6 to 24
8 to 24
93.7
104.8
111.1
187.3
220.7
284.2
122.2
146.1
173.0
6.46
12.70
20.41
10
12
10 to 24
12 to 24
136.5
158.8
342.9
422.3
215.9
257.2
39.46
62.14
Schedule 40S-80S
Schedule 160-XXS
1/2
3/4
1
187
30.11.2007
10:30 Uhr
Seite 188
Threadolets
3000 lbs and 6000 lbs
Run Pipe
Size (in)
Out-Let
Pipe NPS
19.1
19.1
20.6
25.4
26.9
33.3
33.3
35.1
38.1
46.0
50.8
57.2
25.4
25.4
31.8
34.9
44.5
54.0
65.1
73.0
88.9
103.2
122.4
152.4
15.9
15.9
19.1
23.8
30.2
36.5
44.5
50.8
65.1
76.2
93.7
120.7
17.3
22.0
25.8
31.3
37.1
45.5
54.9
61.6
75.3
91.7
109.1
137.2
31.8
36.6
39.6
41.2
42.9
52.3
44.5
50.8
61.9
69.9
82.6
103.2
19.1
25.4
33.3
38.1
49.2
69.9
33.9
41.2
49.9
58.6
66.7
83.2
3/8
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
188
3/4
1
1-1/4
1-1/2
2
2-1/2
1/2
3/4
1
1-1/4
1-1/2
2
30.11.2007
10:30 Uhr
Seite 189
Sockolets
3000 lbs and 6000 lbs
Fittings & Flanges
Dimensions in Millimeters.
Run Pipe
Size (in)
Out-Let
(Pipe NPS)
19.1
19.1
20.6
25.4
26.9
33.3
33.3
35.1
38.1
39.6
44.5
47.8
25.4
25.4
31.8
34.9
44.5
54.0
65.1
73.1
88.9
103.2
122.2
152.4
15.9
15.9
19.1
23.8
30.2
36.5
44.5
50.8
65.1
76.2
93.7
120.7
10.9
14.4
17.8
22.0
27.3
34.1
42.8
48.9
61.4
74.2
90.1
115.8
17.3
22.0
25.8
31.3
37.1
45.5
54.9
61.6
75.3
91.7
109.1
137.2
9.5
9.5
9.5
11.1
12.7
13.5
15.1
15.9
17.5
23.8
28.6
29.4
44.5
50.8
61.9
69.9
82.6
103.2
19.1
25.4
33.3
38.1
49.2
58.7
22.0
27.3
34.1
42.8
48.9
61.4
33.9
41.2
49.9
58.6
66.7
83.2
9.5
14.3
15.9
20.6
20.6
22.2
3/8
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
6
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
3/4
1
1-1/4
1-1/2
2
2-1/2
1/2
3/4
1
1-1/4
1-1/2
2
31.8
36.6
39.6
41.2
42.9
52.3
189
30.11.2007
10:30 Uhr
Seite 190
ANSI B 16.5
Outside Diameter
0.06"
0.12"
1.6 mm
3.2 mm
Inside Diameter
+0.03"
+0.06"
+0.12" - 0.06"
+0.8 mm
+1.6 mm
+3.2 mm - 1.6 mm
0.03"
0.02"
0.02"
Diameter of Hub at
Point of Welding
+0.09" - 0.03"
+0.16" - 0.03"
+2.4 mm - 0.8 mm
+4.0 mm - 0.8 mm
0.06"
0.12"
1.6 mm
3.2 mm
1.6 mm
0.03"
0.8 mm
0.03"
0.06"
0.8 mm
1.6 mm
0.8 mm
0.5 mm
0.5 mm
0.06"
0.12"
1.6 mm
3.2 mm
Thickness
+0.12"
+0.19"
+3.2 mm
+4.8 mm
190
30.11.2007
10:30 Uhr
Seite 191
ANSI B 16.5
Outside Diameter
0.06"
0.12"
1.6 mm
3.2 mm
J1,2,3
Inside Diameter
+0.03"
+0.06"
+0.8 mm
+1.6 mm
Diameter of Counterbore
Diameter of Contact Face
Within limits on
boring gauge
0.03"
0.02"
0.02"
0.8 mm
0.5 mm
0.5 mm
+0.09" - 0.06"
0.12"
+2.4 mm - 1.6 mm
3.2 mm
0.06"
0.03"
1.6 mm
0.8 mm
0.03"
0.06"
0.8 mm
1.6 mm
L1,2,3
+0.12" - 0.03"
+0.19" - 0.03"
+3.2 mm - 0.8 mm
+4.8 mm - 1.6 mm
Thickness
+0.12"
+0.19"
+3.2 mm
+4.8 mm
191
30.11.2007
10:30 Uhr
Seite 192
Facing
Tongue/Groove
Small Male/Female Facings
Stock Finiosh
Large Male/Female Facings
192
12"
300 mm
1.2 - 1.6
0.75 - 0.9
> 12"
> 300 mm
1.6 - 3.2
0.8 - 1.0)
30.11.2007
10:30 Uhr
Seite 193
Facing
193
30.11.2007
10:30 Uhr
Seite 194
Flanges 150lb/sq.in.
ANSI B16-5
Pipe
Flange
D
in.
mm
1/2"
0.84
21.3
3/4"
J
in.
mm
J1
in.
mm
J2
in.
mm
3.50
88.9
0.88
22.4
1.05
26.7
3.88
98.6
1"
1.315
33.4
1 1/4"
J3
in.
mm
p
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
0.90
22.9
0.38
9.7
0.12
3.0
0.44
11.2
1.88
47.8
0.62
15.7
0.62
15.7
1.09
27.7
1.11
28.2
0.44
11.2
0.12
3.0
0.50
12.7
2.06
52.3
0.62
15.7
0.62
15.7
4.25
108.0
1.36
34.5
1.38
35.1
0.50
12.7
0.12
3.0
0.56
14.2
2.19
55.6
0.69
17.5
0.69
17.5
1.66
42.2
4.62
117.3
1.70
43.2
1.72
43.7
0.56
14.2
0.19
4.8
0.62
15.7
2.25
57.2
0.81
20.6
0.81
20.6
1 1/2"
1.90
48.3
5.00
127.0
1.95
49.5
1.97
50.0
0.62
15.7
0.25
6.4
0.69
17.5
2.44
62.0
0.88
22.4
0.88
22.4
2"
2.375
60.3
6.00
152.4
2.44
62.0
2.46
62.5
0.69
17.5
0.31
7.9
0.75
19.1
2.50
63.5
1.00
25.4
1.00
25.4
2 1/2"
2.875
73.0
7.00
177.8
2.94
74.7
2.97
75.4
0.75
19.1
0.31
7.9
0.88
22.4
2.75
69.9
1.42
28.4
1.42
28.4
3"
3.50
88.9
7.5
190.5
3.57
90.7
3.60
91.4
0.81
20.6
0.38
9.7
0.94
23.9
2.75
69.6
1.19
30.2
1.19
30.2
3 1/2"
4.00
101.6
8.50
215.9
4.07
103.4
4.10
104.1
0.38
9.7
0.94
23.9
2.81
71.4
1.25
31.8
1.25
31.8
4"
4.50
114.3
9.00
228.6
4.57
116.1
4.60
116.8
0.44
11.2
0.94
23.9
3.00
76.2
1.31
33.3
1.31
33.3
5"
5.563
141.3
10.00
254.0
5.66
143.8
5.69
144.5
0.44
11.2
0.94
23.9
3.50
88.9
1.44
36.6
1.44
36.6
6"
6.625
168.3
11.00
279.4
6.72
170.7
6.75
171.5
0.50
12.7
1.00
25.4
3.50
88.9
1.56
39.6
1.56
39.6
8"
8.625
219.1
13.50
342.9
8.72
221.5
8.75
222.3
0.50
12.7
1.12
28.4
4.00
101.6
1.75
44.5
1.75
44.5
10"
10.75
273
16.00
406.4
10.88
276.4
10.92
277.4
0.50
12.7
1.19
30.2
4.00
101.6
1.94
49.3
1.94
49.3
12"
12,75
323.8
19,00
482.6
12.88
327.2
12.92
328.2
0.50
12.7
1.25
31.8
4.50
114.3
2.19
55.6
2.19
55.6
14"
14.0
355.6
21.00
533.4
14.14
359.2
14.18
360.2
0.50
12.7
1.38
35.1
5.00
127.0
2.25
57.2
3.12
79.2
16"
16.0
406.4
23.50
596.9
16.16
410.5
16.19
411.2
0.50
12.7
1.44
36.6
5.00
127.0
2.50
62.5
3.44
87.4
18"
18.0
457.2
25.00
635.0
18.18
461.8
18.20
462.3
0.50
12.7
1.56
39.6
5.50
139.7
2.69
68.3
3.81
96.8
20"
20.0
508.0
27.5
698.5
20.20
513.1
20.25
514.4
0.50
12.7
1.69
42.9
5.69
144.5
2.88
73.2
4.06
103.1
24"
24.0
609.6
32.00
812.8
24.25
616.0
24.25
616.0
0.50
12.7
1.88
47.8
6.00
152.4
3.25
82.6
4.38
111.3
*2 = No counter bore required on 150lb threaded flanges (Bitte horizontal einfgen in Spalte J3)
O.D.
in.
mm
*1 = Refer to ANSI B36-10 / B36-19 or as specified by purchaser (Bitte horizontal einfgen in Spalte J)
Nom.
Size
194
30.11.2007
10:30 Uhr
Seite 195
Flanges 150lb/sq.in.
ANSI B16.5
Hub
h3
in.
mm
Raised
Face
Drilling Template
Approx
Weight
a
in.
mm
m
in.
mm
g
in.
mm
Num
ber
l
in.
mm
k
in.
mm
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
0.84
21.3
1.19
30.2
1.38
35.1
0.62
15.7
2.38
60.5
1.1
0.48
0.9
0.39
0.8
0.38
0.9
0.42
0.9
0.42
0.9
0.39
1.05
26.7
1.50
38.1
1.69
42.9
0.62
15.7
2.75
69.9
1.6
0.17
1.2
0.56
1.2
0.55
1.3
0.61
1.3
0.59
1.2
0.56
1.32
33.5
1.94
49.3
2.00
50.8
0.62
15.7
3.12
79.2
2.2
1.01
1.7
0.78
1.7
0.76
1.9
0.86
1.8
0.81
1.7
0.78
1.66
42.2
2.31
58.7
2.50
63.5
0.62
15.7
3.50
88.9
2.9
1.33
2.3
1.03
2.2
1.01
2.6
1.17
2.4
1.07
2.3
1.03
1.90
48.3
2.56
65.0
2.88
73.2
0.62
15.7
3.88
98.6
3.8
1.72
2.9
1.32
2.9
1.30
3.4
1.53
3.0
1.36
2.9
1.32
2.38
60.5
3.06
77.7
3.62
91.9
0.75
19.1
4.75
120.7
5.7
2.58
4.5
2.06
4.5
2.03
5.3
2.42
4.6
2.10
4.5
2.06
2.88
73.2
3.56
90.4
4.12
104.6
0.75
19.1
5.50
139.7
9.1
4.11
7.2
3.28
7.2
3.25
8.7
3.94
7.3
3.90
7.2
3.28
3.5
88.9
4.25
108.0
5.00
127.0
0.75
19.1
6.00
152.4
10.8
4.92
8.5
3.85
8.4
3.81
10.9
4.93
8.6
3.90
8.5
3.28
4.00
101.6
4.81
122.2
5.50
139.7
0.75
19.1
7.00
177.8
13.4
6.08
10.6
4.81
10.5
4.76
13.6
6.17
10.6
4.81
4.50
114.3
5.31
134.9
6.19
157.2
0.75
19.1
7.50
190.5
15.1
6.84
11.7
5.30
11.6
5.25
15.4
7.00
11.7
5.30
5.56
141.2
6.44
163.6
7.31
185.7
0.88
22.4
8.50
215.9
18.9
8.56
13.4
6.07
13.3
6.02
19.9
8.63
13.4
6.07
6.63
168.4
7.56
192.0
8.50
215.9
0.88
22.4
9.50
241.3
23.3
10.6
16.4
7.45
16.3
7.40
24.9
11.3
16.4
7.45
8.63
219.2
9.69
246.1
10.62
269.7
0.88
22.4
11.75
298.5
38.8
17.6
26.7
12.1
26.7
12.1
43.2
19.6
26.7
12.1
10.75
273.1
12.00
304.8
12.75
323.9
12
1.00
25.4
14.25
362.0
53.0
24.0
36.3
16.5
36.1
16.4
63.4
28.8
36.3
16.5
12.75
323.9
14.38
365.3
15.00
381.0
12
1.00
25.4
17.00
431.8
80.4
36.5
57.7
26.2
57.5
26.1
95.2
43.2
57.7
26.2
14.00
355.6
15.75
400.1
16.25
412.8
12
1.12
28.4
18.75
476.3
107
48.4
76.2
34.6
76.0
34.5
128.0
58.1
76.2
34.6
16.00
406.4
18.00
457.2
18.50
469.9
16
1.12
28.4
21.25
539.8
134
60.6
98.7
44.8
98.2
44.6
167.0
76.0
98.7
44.8
18.00
457.2
19.88
505.0
21.00
533.4
16
1.25
31.8
22.75
577.9
151
68.3
108.0
48.9
107.0
48.7
206.0
93.7
108.0
48.9
20.00
508.0
22.00
558.8
23.00
584.2
20
1.25
31.8
25.00
635.0
186
84.5
136.0
61.9
136.0
61.6
269.0
122.0
136.0
61.9
24.00
609.6
26.12
663.4
27.25
692.2
20
1.38
35.1
29.50
749.3
253
115
191.0
86.9
191.0
86.6
408.0
185.0
191.0
86.9
195
BLIND
30.11.2007
10:30 Uhr
Seite 196
Flanges 300lb/sq.in.
ANSI B16-5
Pipe
Flange
O.D.
in.
mm
D
in.
m
1/2"
0.84
21.3
3/4"
J
in.
m
J1
in.
mm
J2
in.
mm
J3
in.
mm
p
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
3.75
95.2
0.88
22.3
0.90
22.9
0.93
26.3
0.38
9.6
0.12
3.0
0.56
14.2
2.06
52.3
0.88
22.3
0.88
22.3
1.05
26.7
4.62
117.3
1.09
27.7
1.11
28.2
1.14
29.0
0.44
11.1
0.12
3.0
0.62
15.7
2.25
57.1
1.00
25.4
1.00
25.4
1"
1.315
33.4
4.88
123.9
1.36
34.5
1.38
35.0
1.41
35.8
0.5
12.7
0.12
3.0
0.69
17.5
2.44
62.0
1.06
26.9
1.06
26.9
1 1/4"
1.66
42.2
5.25
133.3
1.70
43.2
1.72
43.7
1.75
44.4
0.56
14.2
0.19
4.8
0.75
19.0
2.56
65.0
1.06
26.9
1.06
26.9
1 1/2"
1.90
48.3
6.12
155.4
1.95
49.5
1.97
50.0
1.99
50.5
0.62
15.7
0.25
6.4
0.81
20.6
2.69
68.3
1.19
30.2
1.19
30.2
2"
2.375
60.3
6.50
165.1
2.44
62.0
2.46
62.5
2.50
63.5
0.69
17.5
0.31
7.8
0.88
22.3
2.75
69.8
1.31
33.2
1.31
33.2
2 1/2"
2.875
73.0
7.50
190.5
2.94
74.7
2.97
75.4
3.00
76.2
0.75
19.0
0.31
7.8
1.00
25.4
3.00
76.2
1.50
38.1
1.50
38.1
3"
3.50
88.9
8.25
209.5
3.57
90.7
3.60
91.4
3.63
92.2
0.81
20.5
0.38
9.6
1.12
28.4
3.12
79.2
1.69
42.9
1.69
42.9
3 1/2"
4.00
101.6
9.00
228.6
4.07
103.4
4.10
104.1
4.13
104.9
0.38
9.6
1.19
30.2
3.19
81.0
1.75
44.4
1.75
44.4
4"
4.50
114.3
10.00
254.0
4.57
116.1
4.60
116.8
4.63
117.6
0.44
11.1
1.25
31.7
3.38
85.8
1.88
47.7
1.88
47.7
5"
5.563
141.3
11.00
279.4
5.66
143.8
5.69
144.5
5.69
144.5
0.44
11.1
1.38
35.0
3.88
98.5
2.00
50.8
2.00
50.8
6"
6.625
168.3
12.50
317.5
6.72
170.7
6.75
171.4
6.75
171.4
0.50
12.7
1.44
36.5
3.88
98.5
2.06
52.3
2.06
52.3
8"
8.625
219.1
15.00
381.0
8.72
221.5
8.75
222.2
8.75
222.2
0.50
12.7
1.62
41.1
4.38
111.2
2.44
61.9
2.44
61.9
10"
10.75
273
17.50
444.5
10.88
276.3
10.92
277.4
10.88
276.3
0.50
12.7
1.88
47.7
4.62
117.3
2.62
66.5
3.75
95.2
12"
12.75
323.8
20.50
520.7
12.88
327.1
12.92
328.2
12.94
328.7
0.50
12.7
2.00
50.8
5.12
130.0
2.88
73.1
4.00
101.6
14"
14.0
355.6
23.00
584.2
14.14
359.1
14.18
360.2
14.19
360.4
0.50
12.7
2.12
53.8
5.62
142.7
3.00
76.2
4.38
111.2
16"
16.0
406.4
25.50
647.7
16.16
410.5
16.19
411.2
16.19
411.2
0.50
12.7
2.25
57.1
5.75
146.0
3.25
82.5
4.75
120.6
18"
18.0
457.2
28.00
711.2
18.18
461.8
18.20
462.3
18.19
462.0
0.50
12.7
2.38
60.4
6.25
158.7
3.50
88.9
5.12
130.6
20"
20.0
508.0
30.50
774.7
20.20
513.1
20.25
514.3
20.19
512.8
0.50
12.7
2.50
63.5
6.38
162.0
3.75
95.2
5.50
139.7
24"
24.0
609.6
36.00
914.4
24.25
615.9
24.25
615.9
24.19
614.4
0.50
12.7
2.75
69.8
6.62
168.1
4.19
106.4
6.00
152.4
*1 = Refer to ANSI B36-10 / B36-19 or as specified by purchaser (Bitte horizontal einfgen in Spalte J)
Nom.
Size
196
30.11.2007
10:30 Uhr
Seite 197
Flanges 300lb/sq.in.
ANSI B16-5
Raised
Face
Drilling Template
Approx
Weight
h3
in.
mm
a
in.
mm
m
in.
mm
g
in.
mm
Num
ber
l
in.
mm
k
in.
mm
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
0.62
15.7
0.84
21.3
1.50
38.1
1.38
35.0
0.62
15.7
2.62
66.5
1.7
0.75
1.4
0.64
1.4
0.62
1.40
0.64
1.50
0.66
1.40
0.64
0.62
15.7
1.05
26.7
1.88
47.7
1.69
42.9
0.75
19.0
3.25
82.5
2.8
1.26
2.5
1.12
2.4
1.10
2.40
1.11
2.50
1.15
2.50
1.12
0.69
17.5
1.32
33.5
2.12
53.8
2.00
50.8
0.75
19.0
3.50
88.9
3.5
1.52
3.0
1.36
2.9
1.33
3.10
1.39
3.10
1.40
3.00
1.36
0.81
20.5
1.66
42.2
2.50
63.5
2.50
63.5
0.75
19.0
3.88
98.5
4.5
2.03
3.7
1.68
3.6
1.65
3.90
1.79
3.90
1.75
3.70
1.68
0.88
22.3
1.90
48.3
2.75
69.8
2.88
73.1
0.88
22.3
4.50
114.3
6.4
2.89
5.5
2.49
5.4
2.44
5.90
2.66
5.60
2.55
5.50
2.49
1.12
28.4
2.38
60.4
3.31
84.0
3.62
91.9
0.75
19.0
5.00
127.0
7.5
3.40
6.3
2.87
6.2
2.83
7.00
3.18
6.5
2.93
6.30
2.87
1.25
31.7
2.88
73.1
3.94
100.0
4.12
104.6
0.88
22.3
5.88
149.3
11.4
5.17
9.5
4.32
9.4
4.25
10.70
4.85
9.70
4.40
9.50
4.32
1.25
31.7
3.50
88.9
4.62
117.3
5.00
127.0
0.88
22.3
6.62
168.1
15.3
6.93
12.9
5.85
12.7
5.78
15.0
6.81
13.0
3.92
12.90
5.85
1.44
36.5
4.00
101.6
5.25
133.3
5.50
139.7
0.88
22.3
7.25
184.1
19.1
8.67
16.2
7.34
16.0
7.27
19.2
8.71
16.20
7.34
1.44
36.5
4.50
114.3
5.75
146.0
6.19
157.2
0.88
22.3
7.88
200.1
24.7
11.2
21.2
9.61
21.0
9.55
25.3
11.5
21.20
9.61
1.69
42.9
5.56
141.2
7.00
177.8
7.31
185.6
0.88
22.3
9.25
234.9
33.3
15.1
27.1
12.3
26.9
12.2
34.4
15.6
27.10
12.30
1.81
45.9
6.63
168.4
8.12
206.2
8.50
215.9
12
0.88
22.3
10.62
269.7
42.4
19.1
34.4
15.6
34.1
15.5
46.0
20.9
34.40
15.60
2.00
50.8
8.63
219.2
10.25
260.3
10.62
269.7
12
1.00
25.4
13.00
330.2
65.9
29.9
53.3
24.2
53.1
24.1
75.6
34.3
53.30
24.20
2.19
55.6
10.75
273
12.62
320.5
12.75
323.8
16
1.12
28.4
15.25
387.3
94.1
42.7
75.1
34.1
75.8
34.4
117.0
53.3
75.10
34.10
2.38
60.4
12.75
323.8
14.75
374.6
15.00
381.0
16
1.25
31.7
17.75
450.8
136
61.8
110.0
49.8
111.0
50.4
174.0
78.8
110.00
49.80
2.50
63.5
14.00
355.6
16.75
425.4
16.25
412.7
20
1.25
31.7
20.25
514.3
189
85.8
154.0
69.9
156.0
70.9
231.0
105.0
154.00
69.9
2.69
68.3
16.00
406.4
19.00
482.6
18.50
469.9
20
1.38
35.0
22.5
571.5
234
106
194.0
88.1
197.0
89.5
302.0
137.0
194.00
88.10
2.75
69.8
18.00
457.2
21.00
533.4
21.00
533.4
24
1.38
35.0
24.75
628.6
289
131
240.0
109.0
245.0
111.0
386.0
175.0
240.0
109.0
2.88
73.1
20.00
508
23.12
587.2
23.00
584.2
24
1.38
35.0
27.00
685.8
348
158
295.0
134.0
302.0
137.0
487.0
221.0
295.0
134.0
3.25
82.5
24.00
609.6
27.62
701.5
27.25
692.1
24
1.62
41.1
32.00
812.8
507
230
443.0
201.0
449.0
204.0
747.0
339.0
443.0
201.0
197
BLIND
Hub
30.11.2007
10:30 Uhr
Seite 198
Flanges 400lb/sq.in.
ANSI B16z-5
Pipe
Flange
Nom.
Size
O.D.
in.
mm
D
in.
mm
J
in.
mm
J1
in.
mm
J2
in.
mm
J3
in.
mm
p
in.
mm
r
in.
mm
1/2"
0.84
21.3
3/4"
1.05
26.7
1"
1.315
33.4
1 1/4"
1.66
42.2
1 1/2"
1.90
48.3
2"
2.375
60.3
2 1/2"
2.875
73.0
3"
3.50
88.9
3 1/2"
4.00
101.6
4"
4.50
114.3
10.00
254.0
4.57
116.1
4.60
116.8
4.63
117.6
0.44
11.2
5"
5.563
141.3
11.00
279.4
5.66
143.8
5.69
144.5
5.69
144.5
6"
6.625
168.3
12.50
317.5
6.72
170.7
6.75
171.5
8"
8.625
219.1
15.00
381.0
8.72
221.5
10"
10.75
273
17.50
444.5
12"
12.75
323.8
14"
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
1.38
35.1
3.50
88.9
2.00
50.8
2.00
50.8
0.44
11.2
1.50
38.1
4.00
101.6
2.12
53.8
2.12
53.8
6.75
171.5
0.50
12.7
1.62
41.1
4.06
103.1
2.25
57.2
2.25
57.2
8.75
222.3
8.75
222.3
0.50
12.7
1.88
47.8
4.62
117.3
2.69
68.3
2.69
68.3
10.88
276.4
10.92
277.4
10.88
276.4
0.50
12.7
2.12
53.8
4.88
124.0
2.88
73.2
4.00
101.6
20.50
520.7
12.88
327.2
12.92
328.2
12.94
328.7
0.50
12.7
2.25
57.2
5.38
136.7
3.12
79.2
4.25
108.0
14.0
355.6
23.00
584.2
14.14
359.2
14.18
360.2
14.19
360.4
0.50
12.7
2.38
60.5
5.88
149.4
3.31
84.1
4.62
117.3
16"
16.0
406.4
25.50
647.7
16.16
410.5
16.19
411.2
16.19
411.2
0.50
12.7
2.50
63.5
6.00
152.4
3.69
93.7
5.00
127.0
18"
18.0
457.2
28.00
711.2
18.18
461.8
18.2
462.3
18.19
462.0
0.50
12.7
2.62
66.5
6.50
165.1
3.88
98.6
5.38
136.7
20"
20.0
508.0
30.50
774.7
20.20
513.1
20.25
514.4
20.19
512.8
0.50
12.7
2.75
69.9
6.62
168.1
4.00
101.6
5.75
146.1
24"
24.0
609.6
36.00
914.4
24.25
616.0
24.25
616.0
24.19
614.4
0.50
12.7
3.00
76.2
6.88
174.8
4.50
114.3
6.25
158.8
Note: Socket weld flanges are not available in this pressure rating.
198
30.11.2007
10:30 Uhr
Seite 199
Flanges 400lb/sq.in
ANSI B16-5
BLIND
Hub
h
in.
mm
a
in.
mm
Raised
Face
m
in.
mm
g
in.
mm
Drilling Template
Num
ber
l
in.
mm
k
in.
mm
Approx
Weight
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
1.44
36.6
4.50
114.3
5.75
146.1
6.19
157.2
1.00
25.4
7.88
200.2
28.2
12.8
24.4
11.1
24.0
10.9
30.2
13.7
24.4
11.1
1.69
42.9
5.56
141.2
7.00
177.8
7.31
185.7
1.00
25.4
9.25
235.0
37.2
16.9
30.6
13.9
30.2
13.7
40.7
18.5
30.6
13.7
1.81
46.0
6.63
168.4
8.12
206.2
8.50
215.9
12
1.00
25.4
10.62
269.7
48.5
22.0
40.3
18.3
39.6
18.0
56.2
25.5
40.3
18.3
2.00
50.8
8.63
219.2
10.25
260.4
10.62
269.7
12
1.12
28.4
13.00
330.2
76.4
34.7
63.0
28.6
62.3
28.3
93.8
42.6
63.0
28.6
2.19
55.6
10.75
273.1
12.62
320.5
12.75
323.9
16
1.25
31.8
15.25
387.4
107
48.5
86.3
39.2
85.5
38.8
142
64.5
86.3
39.2
2.38
60.5
12.75
323.9
14.75
374.7
15.00
381.0
16
1.38
35.1
17.75
450.9
153
69.6
126
57.0
125
56.6
208
94.3
126
57.0
2.50
63.5
14.00
355.6
16.75
425.5
16.25
412.8
20
1.38
35.1
20.25
514.4
210
95.5
174
79.1
173
78.6
273
124
174
79.1
2.69
68.3
16.00
406.4
19.00
482.6
18.50
469.9
20
1.50
38.1
22.50
571.5
260
118
223
101
220
100
357
162
223
101
2.75
69.9
18.00
457.2
21.00
533.4
21.00
533.4
24
1.50
38.1
24.75
628.7
319
145
271
123
269
122
452
205
271
123
2.88
73.2
20.00
508.0
23.12
587.2
23.00
584.2
24
1.62
41.1
27.00
685.8
381
173
322
146
319
145
560
254
322
146
3.25
82.6
24.00
609.6
27.62
701.5
27.25
692.2
24
1.88
47.8
32.00
812.8
549
249
482
219
478
217
850
386
482
219
199
0.24 = 6.4 mm
0.25 = 6.4 mm
30.11.2007
10:31 Uhr
Seite 200
Flanges 600lb/sq.in.
ANSI B16-5
Pipe
Flange
O.D.
in.
mm
D
in.
mm
1/2"
0.84
21.3
3/4"
J
in.
mm
J1
in.
mm
J2
in.
mm
J3
in.
mm
p
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h
in.
mm
3.75
95.3
0.88
22.4
0.90
22.9
0.93
23.6
0.38
9,60
0.12
3.0
0.56
14.2
2.06
52.3
0.88
22.4
0.88
22.4
1.05
26.7
4.62
117.3
1.09
27.7
1.11
28.2
1.14
29.0
0.44
11.11
0.12
3.0
0.62
15.7
2.25
57.2
1.00
25.4
1.00
25.4
1"
1.315
33.4
4.88
124.0
1.36
34.5
1.38
35.1
1.41
35.8
0.50
12.7
0.12
3.0
0.69
17.5
2.44
62.0
1.06
26.9
1.06
26.9
1 1/4"
1.66
42.2
5.25
133.4
1.70
43.2
1.72
43.7
1.75
44.5
0.56
14.2
0.19
4.8
0.81
20.6
2.62
66.5
1.12
28.4
1.12
28.4
1 1/2"
1.90
48.3
6.12
155.4
1.95
49.5
1.97
50.0
1.99
50.5
0.62
15.7
0.25
6.4
0.88
22.4
2.75
69.9
1.25
31.8
1.25
31.8
2"
2.375
60.3
6.50
165.1
2.44
62.0
2.46
62.5
2.50
63.5
0.69
17.5
0.31
7.9
1.00
25.4
2.88
73.2
1.44
36.6
1.44
36.6
2 1/2"
2.875
73.0
7.50
190.5
2.94
74.7
2.97
75.4
3.00
76.2
0.75
19.0
0.31
7.9
1.12
28.4
3.12
79.2
1.62
41.1
1.62
41.1
3"
3.50
88.9
8.25
209.6
3.57
90.7
3.60
91.4
3.63
92.2
0.81
20.6
0.38
9.7
1.25
31.8
3.25
82.6
1.81
46.0
1.81
46.0
3 1/2"
4.00
101.6
9.00
228.6
4.07
103.4
4.10
104.1
4.13
104.9
0.38
9.7
1.38
35.1
3.38
85.9
1.94
49.3
1.94
49.3
4"
4.50
114.3
10.75
273.1
4.57
116.1
4.60
116.8
4.63
117.6
0.44
11.2
1.50
38.1
4.00
101.6
2.12
53.8
2.12
53.8
5"
5.563
141.3
13.00
330.2
5.66
143.8
5.69
144.5
5.69
144.5
0.44
11.2
1.75
44.5
4.50
114.3
2.38
60.5
2.38
60.5
6"
6.625
168.3
14.00
355.6
6.72
170.7
6.75
171.5
6.75
171.5
0.50
12.7
1.88
47.8
4.62
117.3
2.62
66.5
2.62
66.5
8"
8.625
219.1
16.50
419.1
8.72
221.8
8.75
222.3
8.75
222.3
0.50
12.7
2.19
55.6
5.25
133.4
3.00
76.2
3.00
76.2
10"
10.75
273
20.00
508.0
10.88
276.4
10.92
277.4
10.88
276.4
0.50
12.7
2.50
63.5
6.00
152.4
3.38
85.9
4.38
111.3
12"
12.75
323.8
22.00
558.8
12.88
327.2
12.92
328.2
12.94
328.7
0.50
12.7
2.62
66.5
6.12
155.4
3.62
91.9
4.62
117.3
14"
14.0
355.6
23.75
603.3
14.14
359.2
14.18
360.2
14.19
360.4
0.50
12.7
2.75
69.9
6.50
165.1
3.69
93.7
5.00
127.0
16"
16.0
406.4
27.00
685.8
16.16
410.5
16.19
411.2
16.19
411.2
0.50
12.7
3.00
76.2
7.00
177.8
4.19
106.4
5.50
139.7
18"
18.0
457.2
29.25
743.0
18.18
461.8
18.20
462.3
18.19
462.0
0.50
12.7
3.25
82.6
7.25
184.2
4.62
117.3
6.00
152.4
20"
20.0
508.0
32.00
812.8
20.20
513.1
20.25
514.4
20.19
512.8
0.50
12.7
3.50
88.9
7.50
190.5
5.00
127.0
6.50
165.1
24"
24.0
609.6
37.00
939.8
24.25
616.0
24.25
616.0
24.19
614.4
0.50
12.7
4.00
101.6
8.00
203.2
5.50
139.7
7.25
184.2
*1 = Refer to ANSI B36-10 / B36-19 or as specified by purchaser (Bitte horizontal einfgen in Spalte J)
Nom.
Size
200
30.11.2007
10:31 Uhr
Seite 201
BLIND
Hub
Raised
Face
Drilling Template
Approx.
Weight
h
in.
mm
a
in.
mm
m
in.
mm
g
in.
mm
Number
l
in.
mm
k
in.
mm
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
0.62
15.7
0.84
21.3
1.50
38.1
1.38
35.1
0.62
15.7
2.62
66.5
1.9
0.87
1.6
0.74
1.6
0.72
1.7
0.76
1.7
0.76
1.6
0.74
0.62
15.7
1.05
26.7
1.88
47.8
1.69
42.9
0.75
19.1
3.25
82.6
3.2
1.45
2.8
1.27
2.8
1.25
2.8
1.28
2.8
1.29
2.8
1.27
0.69
17.5
1.32
33.5
2.12
53.8
2.00
50.8
0.75
19.1
3.50
88.9
3.9
1.76
3.3
1.52
3.3
1.50
3.5
1.60
3.4
1.55
3.3
1.52
0.81
20.6
1.66
42.2
2.50
63.5
2.50
63.5
0.75
19.1
3.88
98.6
5.5
2.49
4.5
2.03
4.4
2.00
4.9
2.23
4.5
2.06
4.5
2.03
0.88
22.4
1.90
48.3
2.75
69.9
2.88
73.2
0.88
22.4
4.50
114.3
7.7
3.49
6.5
2.96
6.4
2.92
7.2
3.25
6.60
3.00
6.5
2.96
1.12
28.4
2.38
60.5
3.31
84.1
3.62
91.9
0.75
19.1
5.00
127.0
9.6
4.36
8.0
3.62
7.8
3.55
9.1
4.15
8.1
3.67
8.0
3.62
1.25
31.8
2.88
73.2
3.94
100.1
4.12
104.6
0.88
22.4
5.88
149.4
14.2
6.43
11.6
5.28
11.5
5.23
13.5
6.13
11.8
5.35
11.6
5.28
1.38
35.1
3.50
88.9
4.62
117.3
5.00
127.0
0.88
22.4
6.60
168.1
18.8
8.53
15.4
7.00
15.3
6.95
18.6
8.44
15.6
7.06
15.4
7.00
1.56
39.6
4.00
101.6
5.25
133.4
5.50
139.7
1.00
25.4
7.25
184.2
23.6
10.7
19.5
8.84
19.3
8.78
24.2
11.0
19.5
8.84
1.62
41.1
4.50
114.3
6.00
152.4
6.19
157.2
1.00
25.4
8.50
215.9
38.3
17.4
31.9
14.5
31.7
14.4
38.1
17.3
31.9
14.5
1.88
47.8
5.56
141.2
7.44
189.0
7.31
185.7
1.12
28.4
10.50
266.7
64.3
29.2
53.7
24.4
53.5
24.3
64.8
29.4
53.7
24.4
2.00
50.8
6.63
168.4
8.75
222.3
8.50
215.9
12
1.12
28.4
11.50
292.1
76.9
34.9
63.2
28.7
62.8
28.5
79.5
36.1
63.2
28.7
2.25
57.2
8.63
219.2
10.75
273.1
10.62
269.7
12
1.25
31.8
13.75
349.3
119
53.9
95.6
43.4
94.9
43.1
130
58.9
95.6
43.4
2.56
65.0
10.75
273.1
13.50
342.9
12.75
323.9
16
1.38
35.1
17.00
431.8
191
86.5
155
70.3
155
70.5
215
97.5
155
70.3
2.75
69.9
12.75
323.9
15.75
400.1
15.00
381.0
20
1.38
35.1
19.25
489.0
227
103
186
84.2
190
86.1
273
124
186
84.2
2.88
73.2
14.00
355.6
17.00
431.8
16.25
412.8
20
1.50
38.1
20.75
527.1
269
122
217
98.7
220
100
333
151
217
98.7
3.06
77.7
16.00
406.4
19.50
495.3
18.50
469.9
20
1.62
41.1
23.75
603.3
374
170
313
142
319
145
471
214
313
142
3.12
79.2
18.00
457.2
21.50
546.1
21.00
533.4
20
1.75
44.5
25.75
654.1
449
204
381
173
390
177
599
272
381
173
3.25
82.6
20.00
508.0
24.00
609.6
23.00
584.2
24
1.75
44.5
28.50
723.9
560
254
485
220
496
225
769
349
485
220
3.62
91.9
24.00
609.6
28.25
717.6
27.25
692.2
24
2.00
50.8
33.00
838.2
789
358
687
312
700
318
1174
533
687
312
201
0.24 = 6.4 mm
0.25 = 6.4 mm
30.11.2007
10:31 Uhr
Seite 202
Flanges 900lb/sq.in.
ANSI B16-5
Pipe
Flange
Nom.
Size
OD
in.
mm
D
in.
mm
1/2"
0.84
21.3
3/4"
1.05
26.7
1"
1.315
33.4
1.1/4"
1.66
42.2
1.1/2"
1.90
48.3
2"
2.375
60.3
2.1/2"
2.875
73.0
3"
3.50
88.9
9.50
241.3
4"
4.50
114.3
11.50
292.1
5"
5.563
141.3
12.75
349.2
6"
6.625
168.3
15.00
381.0
8"
8.625
219.1
18.50
469.9
10"
10.75
273
21.50
546.1
12"
12.75
323.8
14"
J
in.
mm
J1
in.
mm
J2
in.
mm
J3
in.
mm
p
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
3.57
90.7
3.60
91.4
3.63
92.2
0.38
9.6
1.50
38.1
4.00
101.6
2.12
53.8
2.12
53.8
4.57
116.1
4.66
116.8
4.63
117.6
0.44
11.1
1.75
44.4
4.50
114.3
2.75
69.8
2.75
69.8
5.66
143.8
5.69
144.5
5.63
144.5
0.44
11.1
2.00
50.8
5.00
127.0
3.12
79.2
3.12
79.2
6.72
170.7
6.75
171.4
6.75
171.4
0.50
12.7
2.19
55.6
5.50
139.7
3.38
85.8
3.38
85.8
8.72
221.5
8.75
222.2
8.75
222.2
0.50
12.7
2.50
63.5
6.38
162.0
4.00
101.6
4.50
114.3
10.88
276.3
10.92
277.4
10.88
276.3
0.50
12.7
2.75
69.8
7.25
184.1
4.25
107.9
5.00
127.0
24.00
609.6
12.88
327.1
12.92
328.2
12.94
328.7
0.50
12.7
3.12
79.2
7.88
200.1
4.62
117.3
5.62
142.7
14.0
355.6
25.25
641.3
14.14
359.1
14.18
360.2
14.19
360.4
0.50
12.7
3.38
85.8
8.38
212.8
5.12
130.0
6.12
155.4
16"
16.0
406.4
27.75
704.8
16.16
410.5
16.19
411.2
16.19
411.2
0.50
12.7
3.50
88.9
8.50
215.9
5.25
133.3
6.50
165.1
18"
18.0
457.2
31.00
787.4
18.18
461.8
18.20
462.3
18.19
462.0
0.50
12.7
4.00
101.6
9.00
228.6
6.00
152.4
7.50
190.5
20"
20.0
508.0
33.75
857.2
20.20
513.1
20.25
514.3
20.19
512.8
0.50
12.7
4.25
107.9
9.75
247.6
6.25
158.7
8.25
209.5
24"
24.0
609.6
41.00
1041.4
24.25
615.9
24.25
615.9
24.19
614.4
0.50
12.7
5.50
139.7
11.50
292.1
8.00
203.2
10.50
266.7
Note: Socket weld flanges are not available in the pressure rating
202
30.11.2007
10:31 Uhr
Seite 203
Flanges 900lb/sq.in.
ANSI B16-5
BLIND
Hub
h3
in.
mm
a
in.
mm
Raised
Face
m
in.
mm
g
in.
mm
Drilling Template
Number
l
in.
mm
Approx.
Weight
k
in.
mm
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
1.62
41.1
3.50
88.9
5.00
127.0
5.00
127.0
1.00
25.4
7.50
190.5
30.2
13.7
25.6
11.6
24.9
11.3
28.9
13.1
25.6
11.6
1.88
47.8
4.50
114.3
6.25
158.7
6.19
157.2
1.25
31.7
9.25
234.9
49.6
22.5
43.4
19.7
42.3
19.2
59.3
26.9
43.4
19.7
2.12
53.8
5.56
141.2
7.50
190.5
7.31
185.6
1.38
35.0
11.00
279.4
82.4
37.4
70.3
31.9
68.7
31.2
80.4
36.5
70.3
31.9
2.25
57.1
6.63
168.4
9.25
234.9
8.50
215.9
12
1.25
31.7
12.50
317.5
105
47.7
90.5
41.1
89.2
40.5
104
47.4
90.5
41.1
2.50
63.5
8.63
219.2
11.75
298.4
10.62
269.7
12
1.50
38.1
15.50
393.7
179
81.3
156
70.7
158
71.5
182
82.5
156
70.7
2.81
71.4
10.75
273
14.50
368.3
12.75
323.8
16
1.50
38.1
18.50
469.9
262
119
223
101
229
104
269
122
223
101
3.00
76.2
12.75
323.8
16.50
419.1
15.00
381.0
20
1.50
38.1
21.00
533.4
346
157
293
133
306
139
381
173
293
133
3.25
82.5
14.00
355.6
17.75
450.8
16.25
412.7
20
1.62
41.1
22.00
558.8
379
180
337
153
355
161
454
206
337
153
3.38
85.9
16.00
406.4
20.00
508.0
18.50
469.9
20
1.75
44.4
24.25
615.9
478
217
408
185
427
194
571
259
408
185
3.50
88.9
18.00
457.2
22.25
565.1
21.00
533.4
20
2.00
50.8
27.00
685.8
643
292
568
258
588
267
808
367
568
258
3.62
91.9
20.00
508
24.50
622.3
23.00
584.2
20
2.12
53.8
29.50
749.3
797
362
698
317
736
334
1020
463
698
317
4.00
101.6
24.00
609.6
29.50
749.3
27.25
692.1
20
2.62
66.5
35.50
901.7
1465
665
1335
606
1361
618
1930
876
1335
606
203
0.24 = 6.4 mm
0.25 = 6.4 mm
30.11.2007
10:31 Uhr
Seite 204
Flanges 1500lb/sq.in.
ANSI B16-5
Pipe
Flange
OD
in.
mm
D
in.
mm
1/2"
0.84
21.3
3/4"
J1
in.
mm
J2
in.
mm
J3
in.
mm
p
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
4.75
12.6
0.88
22.3
0.90
22.9
0.93
23.6
0.38
9.6
0.12
3.0
0.88
22.3
2.38
60.4
1.25
31.7
1.25
31.7
1.05
26.7
5.12
130.0
1.09
27.7
1.11
28.2
1.14
29.0
0.44
11.1
0.12
3.0
1.00
25.4
2.75
69.8
1.38
35.0
1.38
35.0
1"
1.315
33.4
5.88
149.3
1.36
34.5
1.38
35.0
1.41
35.8
0.50
12.7
0.12
3.0
1.12
28.4
2.88
73.1
1.62
41.1
1.62
41.1
1.1/4"
1.66
42.2
6.25
158.7
1.70
43.2
1.72
43.7
1.75
44.4
0.56
14.2
0.19
4.8
1.12
28.4
2.88
73.1
1.62
41.1
1.62
41.1
1.1/2"
1.90
48.3
7.00
177.8
1.95
49.5
1.97
50.0
1.99
50.5
0.62
15.7
0.25
6.4
1.25
31.7
3.25
82.5
1.75
44.5
1.75
44.5
2"
2.375
60.3
8.50
215.9
2.44
62.0
2.46
62.5
2.50
63.5
0.69
17.5
0.31
7.8
1.50
38.1
4.00
101.6
2.25
57.1
2.25
57.1
2.1/2"
2.875
73.0
9.62
244.3
2.94
74.7
2.97
75.4
3.00
76.2
0.75
19.0
0.31
7.8
1.62
41.1
4.12
104.6
2.50
63.5
2.50
63.5
3"
3.50
88.9
10.50
266.7
3.60
91.4
3.63
92.2
0.38
9.6
1.88
47.7
4.62
117.3
2.88
73.15
2.88
73.15
4"
4.50
114.3
12.25
311.1
4.60
116.8
4.63
117.6
0.44
11.1
2.12
53.8
4.88
123.9
3.56
3.56
90.42 90.42
5"
5.563
141.3
14.75
374.6
5.69
144.5
5.69
144.5
0.44
11.1
2.88
73.1
6.12
155.4
4.12
4.12
104.65 104.65
6"
6.625
168.3
15.50
393.7
6.75
171.4
6.75
171.4
0.50
12.7
3.25
82.5
6.75
171.4
4.69
4.69
119.13 119.13
8"
8.625
219.1
19.00
482.6
8.75
222.2
8.75
222.2
0.50
12.7
3.62
91.9
8.38
212.8
5.62
5.62
142.75 142.75
10"
10.75
273
23.00
584.2
10.92
277.4
10.88
276.3
0.50
12.7
4.25
107.9
10.00
254.0
6.25
7.00
158.75 177.8
12"
12.75
323.8
26.50
673.1
12.92
328.2
12.94
328.7
0.50
12.7
4.88
123.9
11.12
282.4
7.12
8.62
180.85 218.9
14"
14.0
355.6
29.50
749.3
14.8
360.2
0.50
12.7
5.25
133.3
11.75
298.4
9.50
241.3
16"
16.0
406.4
32.50
825.5
16.19
411.2
0.50
12.7
5.75
146.0
12.25
311.1
10.25
260.3
18"
18.0
457.2
36.00
914.4
18.20
462.3
0.50
12.7
6.38
162.0
12.88
327.1
10.88
276.3
20"
20.0
508.0
38.75
984.2
20.25
514.3
0.50
12.7
7.00
177.8
14.00
355.6
11.50
292.1
24"
24.0
609.6
46.00
1168.4
24.25
615.9
0.50
12.7
8.00
203.2
16.00
406.4
13.00
330.2
Note:
204
J
in.
mm
Nom.
Size
30.11.2007
10:31 Uhr
Seite 205
Flanges 1500lb/sq.in.
ANSI B16-5
BLIND
Hub
Raised
Face
Drilling Template
Approx.
Weight
h3
in.
mm
a
in.
mm
m
in.
mm
g
in.
mm
Number
l
in.
mm
k
in.
mm
W/N
lbs
kg
S/O
lbs
kg
L/J
lbs
kg
Blind
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
0.88
22.3
0.84
21.3
1.50
38.1
1.38
35.0
0.88
22.3
3.25
82.5
4.1
1.87
3.8
1.74
3.8
1.71
3.9
1.77
4.0
1.80
3.9
1.74
1.00
25.4
1.05
26.7
1.75
44.4
0.69
42.9
0.88
22.3
3.50
88.9
5.6
2.56
5.2
2.34
5.1
2.30
5.3
2.42
5.3
2.41
5.2
2.34
1.12
28.4
1.32
33.4
2.06
52.3
2.00
50.8
1.00
25.4
4.00
101.6
8.2
3.74
7.6
3.44
7.5
3.40
7.9
3.57
7.8
3.55
7.6
3.44
1.19
30.2
1.66
42.2
2.50
63.5
2.50
63.5
1.00
25.4
4.38
111.2
9.5
4.33
8.6
3.91
8.4
3.85
9.1
4.14
8.9
4.02
8.6
3.91
1.25
31.7
1.90
48.3
2.75
69.8
2.88
73.1
1.12
28.4
4.88
123.9
13.1
5.94
11.8
5.36
11.6
5.28
12.7
5.75
12.0
5.45
11.8
5.36
1.50
33.1
2.38
60.3
4.12
104.6
3.62
91.9
1.00
25.4
6.50
165.1
23.8
10.8
21.7
9.85
21.5
9.78
22.2
10.1
22.5
10.2
21.7
9.85
1.88
47.7
2.88
73.0
4.88
123.9
4.12
104.6
1.12
28.4
7.50
190.5
33.0
15.0
30.2
13.7
30.0
13.6
30.8
14.0
30.6
13.9
30.2
13.7
2.00
50.8
3.50
88.9
5.25
133.3
5.00
127.0
1.25
31.7
8.00
203.2
43.8
19.9
39.2
17.8
42.1
19.1
39.4
17.9
2.25
57.1
4.50
114
6.38
162.0
6.19
157.2
1.38
35.0
9.50
241.3
65.9
29.9
60.6
27.5
65.9
29.9
61.2
27.8
2.50
63.5
5.56
141.2
7.75
196.8
7.31
185.6
1.62
41.1
11.50
292.1
122
55.4
113
51.5
129
58.4
114
51.8
2.75
69.8
6.63
168.4
9.00
228.6
8.50
215.9
12
1.50
38.1
12.50
317.5
151
68.4
137
62.0
158
71.8
134
61.0
3.00
76.2
8.63
219.2
11.50
292.1
10.62
269.7
12
1.75
44.4
15.50
393.7
258
117
231
105
269
122
227
103
3.31
84.0
10.75
273
14.50
368.3
12.75
323.8
12
2.00
50.8
19.00
482.6
427
194
304
179
463
210
386
175
3.62
91.9
12.75
323.8
17.75
450.8
15.00
381.0
16
2.12
53.8
22.50
571.5
634
288
593
269
696
316
582
264
14.00
355.6
19.50
495.3
16.25
412.7
16
2.38
60.4
25.00
635.0
837
380
804
365
925
420
16.00
406.4
21.75
552.4
18.50
469.9
16
2.62
66.5
27.75
704.8
1068
485
1011
459
1229
558
18.00
457.2
23.50
596.9
21.00
533.4
16
2.88
73.1
30.50
774.7
1419
644
1317
598
1674
760
20.00
508
25.25
641.3
23.00
584.2
16
3.12
79.2
32.75
831.8
1707
775
1568
712
2126
965
24.00
609.6
30.00
762.0
27.25
692.1
16
3.62
91.9
39.00
990.6
2714
1232
2401
1090
3432
1558
205
0.24 = 6.4 mm
0.25 = 6.4 mm
30.11.2007
10:31 Uhr
Seite 206
Flanges 2500lb/sq.in
ANSI B16-5
Pipe
Flange
OD
in.
mm
D
in.
mm
_"
0.84
21.3
_"
J
in.
mm *
J2
in.
mm
J3
in.
mm
r
in.
mm
b
in.
mm
h
in.
mm
h1
in.
mm
h2
in.
mm
5.25
133.4
0.90
22.9
0.93
23.6
0.12
3.0
1.19
30.2
2.88
73.2
1.56
39.6
1.56
39.6
1.05
26.7
5.50
139.7
1.11
28.2
1.14
29.0
0.12
3.0
1.25
31.8
3.12
79.2
1.69
42.9
1.69
42.9
1"
1.315
33.4
6.25
158.8
1.38
35.1
1.41
35.8
0.12
3.0
1.38
35.1
3.50
88.9
1.88
47.8
1.88
47.8
1 _"
1.66
42.2
7.25
184.2
1.72
43.7
1.75
44.5
0.19
4.8
1.50
38.1
3.75
95.3
2.06
52.3
2.00
52.3
1 _"
1.90
48.3
8.00
203.2
1.97
50.0
1.99
50.5
0.25
6.4
1.75
44.5
4.38
111.3
2.38
60.5
2.38
60.5
2"
2.375
60.3
9.25
235.0
2.46
62.5
2.50
63.5
0.31
7.9
2.00
50.8
5.00
127.0
2.75
69.9
2.75
69.9
2 _"
2.875
73.0
10.50
266.7
2.97
75.4
3.00
76.2
0.31
7.9
2.25
57.2
5.62
142.7
3.12
79.2
3.12
79.2
3"
3.50
88.9
12.00
304.8
3.60
91.4
3.63
92.2
0.38
9.7
2.62
66.5
6.62
168.1
3.62
91.9
3.62
91.9
4"
4.50
114.3
14.00
355.6
4.60
116.8
4.63
117.6
0.44
11.2
3.00
76.2
7.50
190.5
4.25
108.0
4.25
108.0
5"
5.563
141.3
16.50
419.1
5.69
144.5
5.69
144.5
0.44
11.2
3.62
91.9
9.00
228.6
5.12
130.0
5.12
130.0
6"
6.625
168.3
19.00
482.6
6.75
171.5
6.75
171.5
0.50
12.7
4.25
108.0
10.75
273.1
6.00
152.4
6.00
152.4
8"
8.625
219.1
21.75
552.5
8.75
222.3
8.75
222.3
0.50
12.7
5.00
127.0
12.50
317.5
7.00
177.8
7.00
177.8
10"
10.75
273
26.50
673.1
10.92
277.4
10.88
276.4
0.50
12.7
6.50
165.1
16.50
419.1
9.00
228.6
9.00
228.6
12"
12.75
323.8
30.00
762.0
12.92
328.2
12.94
328.7
0.50
12.7
7.25
184.2
18.25
463.6
10.00
254.0
10.00
254.0
Nom.
Size
J1
in.
mm
p
in.
mm
Note: Slip-on and Socket weld flanges are not available in this pressure rating.
Weld necks, Lap joint, Blind and Threaded flanges up to 12" in this pressure rating.
206
30.11.2007
10:31 Uhr
Seite 207
Flanges 2500lb/sq.in.
ANSI B16-5
Fittings & Flanges
Hub
Raised
Face
Drilling Template
h3
in.
mm
a
in.
mm
m
in.
mm
g
in.
mm
Number
l
in.
mm
k
in.
mm
W/N
lbs
kg
1.12
28.4
0.84
21.3
1.69
42.9
1.38
35.1
0.88
22.4
3.50
88.5
1.25
31.8
1.05
26.7
2.00
50.8
1.69
42.9
0.88
22.4
1.38
35.1
1.32
33.5
2.25
57.2
2.00
50.8
1.50
38.1
1.66
42.2
2.88
73.2
2.50
63.5
1.75
44.5
1.90
48.3
3.12
79.2
2.00
50.8
2.38
60.5
2.25
57.2
Approx.
Weight
L/J
lbs
kg
Blind
lbs
kg
6.9
3.12
6.4
2.92
6.6
2.99
6.5
2.95
3.75
95.3
8.1
3.70
7.5
3.40
7.7
3.50
7.6
3.44
1.00
25.4
4.25
108.0
11.5
5.24
10.5
4.77
10.9
4.96
10.6
4.82
1.12
28.4
5.12
130.0
17.0
7.74
15.6
7.08
16.2
7.35
15.7
7.14
2.88
73.2
1.25
31.8
5.75
146.1
24.0
10.9
21.9
9.93
22.9
10.4
22.0
10.0
3.75
95.3
3.62
91.9
1.12
28.4
6.75
171.5
35.7
16.2
32.4
14.7
34.4
15.6
32.6
14.8
2.88
73.2
4.50
114.3
4.12
104.6
1.25
31.8
7.75
196.9
52.2
23.7
46.9
21.3
49.8
22.6
47.4
21.5
2.50
63.5
3.50
88.9
5.25
133.4
5.00
127.0
1.38
35.1
9.00
228.6
79.7
36.2
71.1
32.3
76.7
34.8
71.8
32.6
2.75
69.9
4.50
114.3
6.50
165.1
6.19
157.2
1.62
41.1
10.75
273.1
122
55.3
116
52.5
119
53.9
117
52.9
3.00
76.2
5.56
141.2
8.00
203.2
7.31
185.7
1.88
47.8
12.75
323.9
204
92.5
182
82.6
200
90.8
183
83.1
7.25
82.6
6.63
168.4
9.25
235.0
8.50
215.9
2.12
53.8
14.50
368.3
315
143
280
127
311
141
282
128
3.75
95.3
8.63
219.2
12.00
304.8
10.62
269.7
12
2.12
53.8
17.25
438.2
474
215
410
186
471
214
414
188
4.25
108.0
10.75
273.1
14.75
374.7
12.75
323.9
12
2.62
66.5
21.25
539.8
894
406
775
352
905
411
782
355
4.75
120.7
12.75
323.9
17.38
441.5
15.00
381.0
12
2.88
73.2
24.38
619.3
1260
572
1104
501
1304
592
1110
504
S/O
lbs
kg
S/W
lbs
kg
Thrd
lbs
kg
207
30.11.2007
10:31 Uhr
Seite 208
D
in.
mm
26"
26.0
660.4
28"
b
in.
mm
h
in.
mm
34 _
869.9
2 11/16
68.3
28.0
711.2
36 _
927.1
30"
30.0
762.0
32"
a
in.
mm
Raised
Face
Drilling
Template
Appr.
Weight
m
in.
mm
g
in
mm
Num
ber
I
in.
mm
k
in
mm
4_
120.6
26 5/8
676.3
29 _
749.3
24
1 3/8
34.9
31 _
806.4
2 11/16
71.4
415/16
125.4
28 5/8
727.1
31 _
800.1
28
1 3/8
34.9
34
863.6
38 _
984.2
2 15/16
74.6
5 3/8
136.5
30 _
781.0
33 _
857.2
28
1 3/8
34.9
36
914.4
32.0
812.8
41 _
1060.4
3 3/16
81.0
5 11/16
144.5
32 _
831.8
36
914.4
28
1 5/8
41.3
38 _
977.9
34"
34.0
863.6
43 _
1111.2
3_
82.5
5 7/8
149.2
34 _
882.6
38
965.2
32
1 5/8
41.3
40 _
1028.7
36"
36.0
914.4
46
1168.4
3 9/16
90.5
6 3/16
157.2
36 _
933.4
40 _
1022.3
32
1 5/8
41.3
42 _
1085.8
38"
38.0
965.2
48 _
1238.2
3 7/16
87.3
6 3/16
157.1
39
990.6
42 _
1073.1
32
1 5/8
41.3
45 _
1149.3
40"
40.0
1016.0
50 _
1289.0
3 9/16
90.5
6 7/16
163.5
41
1041.4
44 _
1123.9
36
1 5/8
41.3
47 _
1200.1
42"
42.0
1066.8
53
1346.2
3 13/16
96.8
6_
171.4
43
1092.2
47
1193.8
36
1 5/8
41.3
49 _
1257.3
44"
44.0
1117.6
55 _
1403.3
4
101.6
7
177.8
45
1143.0
49
1244.6
40
1 5/8
41.3
51 _
1314.4
46"
46.0
1168.4
57 _
1454.1
4 1/16
103.1
7 5/16
185.7
47 1/8
1196.9
51
1295.4
40
1 5/8
41.3
53 _
1365.2
48"
48.0
1219.2
59 _
1511.3
4_
107.9
7 9/16
192.0
49 1/8
1247.6
53 _
1358.9
44
1 5/8
41.3
56
1422.4
50"
50.0
1270.0
61 _
1568.4
4 3/8
111.1
8
203.2
51 _
1301.7
55 _
1409.7
44
1 7/8
47.7
58 _
1479.5
52"
52.0
1320.8
64
1625.6
4 9/16
115.8
8_
209.5
53 _
1352.5
57 _
1460.5
44
1 7/8
47.7
60 _
1536.7
54"
54.0
1371.6
66 _
1682.7
4_
120.6
8_
215.9
55 _
1403.3
59 _
1511.3
44
1 7/8
47.7
62 _
1593.8
56"
56.0
1422.4
68 _
1746.2
4 7/8
123.8
9
228.6
57 3/8
1457.4
62
1574.8
48
1 7/8
47.7
65
1651.0
58"
58.0
1473.2
71
1803.4
5 1/16
128.5
9_
234.9
59 3/8
1508.2
64
1625.6
48
1 7/8
47.7
67 _
1708.1
60"
60.0
1524.0
73
1854.2
5 3/16
131.7
9 7/16
239.7
61 3/8
1559.0
66
1676.4
52
1 7/8
47.7
69 _
1758.9
208
J
in.
mm
Hub
To be specified by purchaser
OD
in.
mm
To be specified by purchaser
Nom.
Size
Flange
Pounds
Kilo
To be specified by purchaser
Pipe
30.11.2007
10:31 Uhr
Seite 209
D
in.
mm
26"
26.0
660.4
28"
b
in.
mm
h
in.
mm
38 _
971.5
3 1/8
79.4
28.0
711.2
40 _
1035.0
30"
30.0
762
32"
Drilling
Template
I
in.
mm
Appr.
Weight
g
in
mm
Num
ber
7_
184.1
28 3/8
720.7
29 _
749.3
28
1_
44.3
34 _
876.3
3 1/8
85.7
7_
196.8
30 _
774.7
31 _
800.0
28
1_
44.4
37
939.8
43
1092.2
3 5/8
92.1
8_
209.5
32 9/16
827.1
33 _
857.2
28
1 7/8
47.6
39 _
996.9
32.0
812.8
45 _
1149.3
3 7/8
98.4
8_
222.2
34 11/16
881.1
36
914.4
28
2 42 _
50.8
1054.1
34.0
863.6
47 _
1206.5
4
101.6
9 1/8
231.8
36 7/8
936.6
38
965.2
28
2 43 _
50.8
1104.9
36"
36.0
914.4
50
1270.0
4 1/8
104.8
9_
241.3
39
990.6
40 _
1022.3
32
2 1/8
54
46
1168.4
38"
38.0
965.2
46
1168.4
4_
107.9
7 1/8
180.9
39 1/8
993.7
40 _
1028.7
32
1 5/8
41.2
43
1092.2
40"
40.0
1016.0
48 _
1238.2
4_
114.3
7 5/8
193.6
41 _
1047.7
42 _
1085.8
32
1_
44.4
45 _
1155.7
42"
42.0
1066.8
50 _
1289.0
43 _
1098.5
44 _
1136.6
32
1_
44.4
47 _
1206.5
44"
44.0
1117.6
53 _
1352.5
45 _
1149.3
47
1193.8
32
1 7/8
47.6
49 _
1263.6
46"
46.0
1168.4
55 _
1416.0
47 3/8
1203.4
49
1244.6
28
2 52
50.8
1320.8
48.0
1219.2
2 54
50.8
1371.6
50"
4 11/16 7 7/8
119.1
200.1
a
in.
mm*
Raised
Face
m
in.
mm
34"
J
in.
mm*
To be specified by purchaser
OD
in.
mm
To be specified by purchaser
Nom.
Size
Hub
k
in
mm
4 7/8
123.9
8 1/8
206.3
5 1/16
128.5
8_
215.9
57 _
1466.8
5_
133.4
8 13/16
223.8
49 3/8
1254.1
51 _
1301.7
32
50.0
1270.0
60 _
1530.3
5_
139.7
9 1/8
231.7
51 3/8
1304.9
53 _
1358.9
32
2 1/8
53.9
56 _
1428.7
52"
52.0
1320.8
62 _
1581.1
5 11/16 9 3/8
144.5
238.1
53 3/8
1355.7
55 _
1409.7
32
2 1/8
53.9
58 _
1479.5
54"
54.0
1371.6
65 _
1657.3
6
152.4
9 15/16
252.4
55 _
1409.7
57 _
1466.8
28
2 3/8
60.3
61
1549.4
56"
56.0
1422.4
67 _
1708.1
6 1/16
153.9
10 _
260.3
57 5/8
1463.6
59 _
1517.6
28
2 3/8
60.3
63
1600.2
58"
58.0
1473.2
69 _
1758.9
6_
158.7
10 _
266.7
59 5/8
1514.4
62
1574.8
32
2 3/8
60.3
65
1651.0
60"
60.0
1524.0
71 _
1809.7
6 7/16
163.5
10 _
273.0
61 5/8
1565.2
64
1625.6
32
2 3/8
60.3
67
1701.8
48"
Pounds
Kilo *
To be specified by purchaser
Flange
209
Pipe
30.11.2007
10:31 Uhr
Seite 210
Pipe
Hub
Raised
Face
J
in.
b
in.
h
in.
a
in.
m
in.
g
in
mm
mm
mm
mm
mm
mm
mm
mm
26"
26.0
660.4
38 _
971.5
3_
88.9
7 5/8
193.7
28 5/8
727.1
29 _
749.3
28"
28.0
711.2
40 _
1035.0
3_
95.2
8 1/8
206.4
30 13/16
782.6
30"
30.0
762
43
1092.2
4
101.6
8 5/8
219.1
32"
32.0
812.8
45 _
1149.3
4 _"
107.9
34"
34.0
863.6
47 _
1206.5
36"
36.0
914.4
38"
Drilling
Template
I
in.
k
in
Pounds
mm
mm
Kilo
28
1 7/8
47.6
34 _
846.3
31 _
800.1
28
2
50.8
37
939.8
32 15/16
836.6
33 _
857.2
28
2 1/8
54.0
39 _
996.9
9 1/8
231.8
35
889.0
36
914.4
28
2 1/8
54.0
41 _
1054.1
4 3/8
111.1
9_
241.3
37 3/16
944.6
38
965.2
28
2 1/8
54.0
43 _
1104.9
50
1270.0
4_
114.3
9 7/8
250.8
39 1/8
1000.1
40 _
1022.3
32
2 1/8
54.0
46
1168.4
38.0
965.2
47 _
1206.5
4 7/8
123.8
8 1/8
206.3
39 _
1003.3
40 _
1035.0
32
1 7/8
47.6
44
1117.6
40"
40.0
1016.0
50
1270.0
5 1/8
130.1
8_
215.9
41 _
1054.1
43
1092.2
32
2
50.8
46 _
1174.7
42"
42.0
1066.8
52
1320.8
5_
133.3
8 13/16
223.8
43 5/8
1108.0
45
1143.0
32
2
50.8
48 _
1225.5
44"
44.0
1117.6
54 _
1384.3
5_
139.7
9 3/16
233.3
45 5/8
1158.8
47 _
1200.1
32
2 1/8
53.9
50 _
1282.7
46"
46.0
1168.4
56 _
1441.4
5_
146.0
9 5/8
244.0
47 _
1212.8
49 _
1257.3
36
2 1/8
53.9
52 _
1339,8
48"
48.0
1219.2
59 _
1511.3
6
152.4
10 1/8
257.1
49 7/8
1266.8
51 _
1308.1
28
2 3/8
60.3
55 _
1403.3
50"
50.0
1270.0
61 _
1568.4
6 3/16 10 9/16
157.2
268.2
52
1320.8
53 5/8
1362.0
32
2 3/8
60.3
57 _
1460.5
52"
52.0
1320.8
63 _
1619.2
6 3/8
161.9
10 7/8
276.2
54
1371.6
55 5/8
1412.8
32
2 3/8
60.3
59 _
1511.3
54"
54.0
1371.6
67
1701.8
6 11/16 11 3/8
169.9
288.9
56 1/8
1425.5
57 7/8
1470.0
28
2 5/8
66.6
62 _
1581.1
56"
56.0
1422.4
69
1752.6
6 7/8
174.6
11 _
298.4
58 _
1479.5
60 1/8
1527.1
32
2 5/8
66.6
64 _
1631.9
58"
58.0
1473.2
71
1803.4
7
177.8
12 1/16
306.3
60 _
1530.3
62 1/8
1577.9
32
2 5/8
66.6
66 _
1682.7
60"
60.0
1524.0
74 _
1885.9
7 5/16 12 9/16
185.7
319.0
62 3/8
1584.3
64 3/8
1635.1
32
2 7/8
73.0
69
1752.6
210
Num
ber
Appr.
Weight
To be specified by purchaser
D
in.
To be specified by purchaser
OD
in.
To be specified by purchaser
Nom.
Size
Flange
30.11.2007
10:31 Uhr
Seite 211
D
in.
mm
26"
26.0
660.4
28"
J
in.
mm
b
in.
mm
h
in.
mm
40
1016.0
4_
107.9
8_
222.2
28.0
711.2
42 _
1073.1
4 3/8
111.1
30"
30.0
762
44 _
1130.3
32"
32.0
812.8
34"
Raised
Face
Drilling
Template
I
in.
mm
Appr.
Weight
m
in.
mm
g
in
mm
Num
ber
29
7/16
747.7
29 _
749.3
28
2
50.8
36
914.4
9_
234.9
31
5/8
803.3
31 _
800.1
28
2 1/8
54.0
38
965.2
4_
114.3
9_
247.6
33
16/16
862.0
33 _
857.2
28
2 1/8
54.0
40 _
1022.3
47
1193.8
4 5/8
117.5
10 _
260.3
36 1/8
917.6
36
914.4
28
2 3/8
60.3
42 _
1079.5
34.0
863.6
49
1244.6
4_
120.6
10 5/8
269.9
38 5/16
973.1
38
965.2
28
2 3/8
60.3
44 _
1130.3
36"
36.0
914.4
51 _
1314.4
4 7/8
123.8
11 1/8
282.6
40 5/8
1031.9
40 _
1022.3
28
2 5/8
66.7
47
1193.8
38"
38.0
965.2
50
1270.0
6
152.4
10
254.0
40 _
1022.3
41 _
1054.1
28
2 3/8
60.3
45 _
1162.0
40"
40.0
1016.0
52
1320.8
6_
158.7
10 3/8
263.5
42 _
1073.1
43 _
1111.2
32
2 3/8
60.3
47 _
1212.8
42"
42.0
1066.8
55 _
1403.3
6 5/8
168.2
11
279.4
44 3/8
1127.1
46
1168.4
28
2 5/8
66.7
50 _
1282.7
44"
44.0
1117.6
57 _
1554.1
46 _
1181.1
48 _
1225.5
32
2 5/8
66.7
52 _
1333.5
46"
46.0
1168.4
59 _
1511.3
8 5/8
1235.1
50 _
1276.3
32
2 5/8
66.7
54 _
1390.6
48"
48.0
1219.2
50"
6 13/16 11 3/8
173.0
288.9
a
in.
mm
To be specified by purchaser
OD
in.
mm
To be specified by purchaser
Nom.
Size
Hub
k
in
mm
7 1/16
179.3
11 13/15
300.0
62 _
1593.8
7 7/16
188.9
12 7/16
315.9
50 _
1289.0
52 _
1333.5
32
2 7/8
73.0
57 _
1460.5
50.0
1270.0
65 _
1670.0
7_
196.8
12 15/16
328.6
50 7/8
1292.2
54 _
1384.3
28
3 1/8
79.3
60
1524.0
52"
52.0
1320.8
67 _
1720.8
8
203.2
13 _
336.5
54 7/8
1393.8
56 _
1435.1
32
3 1/8
79.3
62
1574.8
54"
54.0
1371.6
70
1778.0
8_
209.5
13 _
349.2
57
1447.8
58 _
1492.21
32
3 1/8
79.3
64 _
1631.9
56"
56.0
1422.4
73
1854.2
8 9/16
217.4
14 _
361.9
59 1/8
1501.7
60 _
1543.0
32
3 3/8
85.7
66 _
1695.4
58"
58.0
1473.2
75
1905.0
8_
222.2
14 9/16
369.8
61 1/8
1552.5
63
1600.2
32
3 3/8
85.7
68 _
1746.2
60"
60.0
1524.0
78 _
1993.9
9 3/16
233.4
15 5/16
388.9
63 3/8
1609.7
65 _
1657.3
28
3 5/8
92.0
71 _
1822.4
Pounds
Kilo
To be specified by purchaser
Flange
211
Pipe
30.11.2007
10:31 Uhr
Seite 212
Flange
D
in.
mm
26"
26.0
660.4
28"
b
in.
mm
h
in.
mm
42 _
1085.8
5_
139.7
28.0
711.2
46
1168.4
30"
30.0
762
32"
a
in.
mm
Raised
Face
Drilling
Template
I
in.
mm
Appr.
Weight
m
in.
mm
g
in
mm
Num
ber
11 _
285.7
30 _
774.4
29 _
749.3
20
2 7/8
73.0
37 _
952.5
5 5/8
142.9
11 _
298.4
32 _
831.8
31 _
800.1
20
3 1/8
79.4
40 _
1022.3
48 _
1231.9
5 7/8
149.2
12 _
311.1
35
889.0
33 _
857.2
20
3 1/8
79.4
42 _
1085.8
32.0
812.8
51 _
1314.4
6_
158.7
13
330.2
37 _
946.1
36
914.4
20
3 3/8
85.7
45 _
1155.7
34"
34.0
863.6
55
1397.0
6_
165.1
13 _
349.2
39 5/8
1006.5
38
965.2
20
3 5/8
92.1
48 _
1225.5
36"
36.0
914.4
57 _
1460.5
6_
171.4
14 _
361.9
41 7/8
1063.6
40 _
1022.3
20
3 5/8
92.1
50 _
1289.0
38"
38.0
965.2
57 _
1460.5
7_
190.5
13 7/8
352.4
42 _
1073.1
43 _
1098.5
20
3 5/8
92.1
50 _
1289.0
40"
40.0
1016.0
59 _
1511.3
7_
196.8
14 5/16
363.5
44 3/8
1127.1
45 _
1162.0
24
3 5/8
92.1
52 _
1339.8
42"
42.0
1066.8
61 _
1562.1
8 1/8
206.3
14 5/8
371.4
46 5/16
1176.3
47 _
1212.8
24
3 5/8
92.1
54 _
1390.6
44"
44.0
1117.6
64 7/8
1647.8
8 7/16
214.3
15 3/8
390.5
48 5/8
1235.0
50
1270.0
24
3 7/8
98.4
57 5/8
1463.6
46"
46.0
1168.4
68 _
1733.5
8 7/8
225.4
16 3/16
411.1
50 7/8
1292.2
52 _
1333.5
24
4 1/8
104.7
60 _
1536.7
48"
48.0
1219.2
70 _
1784.3
9 3/16
233.4
16 _
419.1
52 7/8
1343.0
54 _
1384.3
24
4 1/8
104.7
62 _
1587.5
212
J
in.
mm
To be specified by purchaser
OD
in.
mm
To be specified by purchaser
Nom.
Size
Hub
k
in
mm
Pounds
Kilo
To be specified by purchaser
Pipe
30.11.2007
10:31 Uhr
Seite 213
OD
in.
mm
D
in.
mm
26"
26.0
660.4
38 _
971.5
28"
28.0
711.2
40 3/4
1035.0
30"
30.0
762
43
1092.2
32"
32.0
812.8
45 1/4
1149.3
34"
34.0
863.6
47 1/2
1206.5
36"
36.0
50
J
in.
mm
To be specified by purchaser
Nom.
Size
Hub
b
in.
mm
h
in.
mm
3 1/8
79.4
7 1/4
184.1
3 3/8
85.7
7 3/4
196.8
3 5/8
92.1
8 1/4
209.5
3 7/8
98.4
8 3/4
222.2
4
101.6
9 1/8
231.8
4 1/8
9 1/2
a
in.
mm
Raised
Face
Drilling Template
Ring Joint
Approx.
m
in.
mm
g
in.
mm
Number
I
in.
mm
k
in.
mm
p
in.
mm
E
F
in. in.Pounds
mm
kilo
28 3/8
720.7
31 7/8
809.6
28
1 3/4
44.4
34 1/2
876.3
29 1/2
749.3
1/2
12.7
25/32
19.8
30 1/2
774.7
33 7/8
860.4
28
1 3/4
44.4
37
939.8
31 1/2
800.1
1/2
12.7
25/32
19.8
32 9/16
827.1
36 1/8
917.6
28
1 7/8
47.6
39 1/4
996.9
33 3/4
857.2
1/2
12.7
25/32
19.8
34 11/16
881.1
38 3/4
984.2
28
2
50.8
41 1/2
1054.1
36
914.4
9/16
14.3
29/32
23.0
36 7/8
936.6
40 3/4
1035.0
28
2
50.8
43 1/2
1104.9
38
965.2
9/16
14.3
29/32
23.0
39
43
32
2 1/8
46
40 1/4 9/16
29/32
To be specified by purchaser
Flange
To be specified by purchaser
Pipe
400 lb/sq.in.
OD
in.
mm
D
in.
mm
26"
26.0
660.4
38 _
971.5
28"
28.0
711.2
40 3/4
1035.0
30"
30.0
762
43
1092.2
32"
32.0
812.8
45 1/4
1149.3
34"
34.0
863.6
47 1/2
1206.5
36"
36.0
914.4
50
1270.0
J
in.
mm
To be specified by purchaser
Nom.
Size
Hub
b
in.
mm
h
in.
mm
3 1/2
88.9
Drilling Template
I
in.
mm
k
in.
mm
Ring Joint
p
in.
mm
E
in.
mm
Approx.
m
in.
mm
g
in.
mm
Number
7 5/8
193.7
28 5/8
727.1
31 7/8
809.6
28
1 7/8 34 1/2
47.6
876.3
29 1/2
749.3
1/2 25/32
12.7 19.8
3 3/4
95.2
8 1/8
206.4
30 13/16
782.6
33 7/8
860.4
28
2
50.8
37
939.8
31 1/2
800.1
1/2 25/32
12.7 19.8
4
101.6
8 5/8
219.1
32 15/16
836.6
36 1/8
917.6
28
2 1/8 39 1/4
54.0 996.9
33 3/4
857.2
1/2 25/32
12.7 19.8
4 1/4
107.9
9 1/8
231.8
35
889.0
38 3/4
984.2
28
2 1/8 41 1/2
54.0 1054.1
36
914.4
9/16 29/32
14.3 23.0
4 3/8
111.1
9 1/2
241.3
37 3/16
944.6
40 3/4
1035.0
28
2 1/8 43 1/2
54.0 1104.9
38
965.2
9/16 29/32
14.3 23.0
4 1/2
114.3
9 7/8
250.8
39 3/8
1000.1
43
1092.2
32
2 1/8
46
54.0 1168.4
a
in.
mm
Raised
Face
F
in.
kilo
Pounds
To be specified by purchaser
Flange
To be specified by purchaser
Pipe
213
300 lb/sq.in.
30.11.2007
10:31 Uhr
Seite 214
OD
in.
mm
D
in.
mm
26"
26.0
660.4
40
1016.0
28"
28.0
711.2
42 1/4
1073.1
30"
30.0
762
44 1/2
1130.3
32"
32.0
812.8
47
1193.8
34"
34.0
863.6
49
1244.6
36"
36.0
914.4
51 3/4
1314.4
J
in.
mm
To be specified by purchaser
Nom.
Size
***
Hub
b
in.
mm
h
in.
mm
4 1/4
107.9
8 3/4
222.2
4 3/8
111.1
9 1/4
234.9
4 1/2
114.3
9 3/4
247.6
4 5/8
117.5
10 1/4
260.3
4 3/4
120.6
10 5/8
269.9
4 7/8
123.8
11 1/8
282.6
a
in.
mm
To be specified by purchaser
Pipe
**
Raised
Face
Drilling Template
Ring Joint
p
in.
mm
E
in.
mm
Approx.
m
in.
mm
g
in.
mm
Number
I
in.
mm
k
in.
mm
F
in.
kilo
29 7/16
747.7
31 7/8
809.6
28
2
50.8
36
914.4
31 5/8
803.3
33 7/8
860.4
28
2 1/8
54.0
38
965.2
33 15/16
862.0
36 1/8
917.6
28
2 1/8
54.0
40 1/4
1022.3
36 1/8
917.6
38 3/4
984.2
28
2 3/8
60.3
42 1/2
1079.5
36
914.4
9/16 29/32
14.3 23.0
38 5/16
973.1
40 3/4
1035.0
28
2 3/8
60.3
44 1/2
1130.3
38
965.2
9/16 29/32
14.3 23.0
40 5/8
1031.9
43
1092.2
28
2 5/8
66.7
47
1193.8
Pounds
To be specified by purchaser
600 lb/sq.in.
900 lb/sq.in.
OD
in.
mm
D
in.
mm
26"
26.0
660.4
42 3/4
1085.8
28"
28.0
711.2
46
1168.4
30"
30.0
762
48 1/2
1231.9
32"
32.0
812.8
51 3/4
1314.4
34"
34.0
863.6
55
1397.0
36"
36.0
57 1/2
214
J
in.
mm
b
in.
mm
h
in.
mm
a
in.
mm
5 1/2 11 1/4
139.7 285.7
***
5 5/8 11 3/4
142.9 298.4
5 7/8 12 1/4
149.2 311.1
6 1/4
158.7
13
330.2
6 1/2
165.1
13 3/4
349.2
6 3/4
14 1/4
To be specified by purchaser
Nom.
Size
Hub
**
Raised
Face
Drilling Template
Ring Joint
p
in.
mm
E
in.
mm
Approx.
m
in.
mm
g
in.
mm
Number
I
in.
mm
k
in.
mm
F
in.
kilo
31 1/2
774.4
32 3/4
831.8
20
2 7/8
73.0
37 1/2
952.5
32 3/4
831.8
35
889.0
20
3 1/8
79.4
40 1/4
1022.3
35
889.0
37 1/4
946.1
20
3 1/8
79.4
42 3/4
1085.8
37 1/4
946.1
39 1/2
1003.3
20
3 3/8
85.7
45 1/2
1155.7
36
11/16 1 5/16
914.4 17.5
33.3
39 5/8
1006.5
42
1066.8
20
3 5/8
92.1
48 1/4
1225.5
38
13/16 1 7/16
965.2 20.6 36.5
41 7/8
44 1/4
20
3 5/8
50 3/4
Pounds
To be specified by purchaser
Flange
To be specified by purchaser
Pipe
30.11.2007
10:31 Uhr
Seite 215
General Survey
Nominal Pressure lb/sq.in.
kp/cm2
N/cm2
150
10.6
104
300
21.1
207
Type of Flange
Welding Neck Flanges
Attention!
Flanges to API Standard 605 are not
identical with MSS SP 44 and BS 3293
Welding Ends:
215
30.11.2007
10:31 Uhr
Seite 216
Pipe
Flange
OD
in.
mm
D
in.
mm
26"
26.0
660.4
28"
Raised
Face
Drilling
Template
Appr.
Weight
b
in.
mm
h
in.
mm
a
in.
mm
m
in.
mm
g
in
mm
Num
ber
I
in.
mm
k
in
mm
34 15/16
785.8
1 5/8
41.3
3 1/2
88.9
26 1/16
662.0
26 15/16
684.2
28
711.2
36
7/8
22.2
29 5/16
744.5
139
63
28.0
711.2
32 15/16
836.6
1 3/4
44.4
3 3/4
95.2
28 1/16
712.8
28 15/16
735.0
30
762.0
40
7/8
22.2
31 5/16
795.3
163
74
30"
30.0
762
34 15/16
887.4
1 3/4
44.4
3 15/16
100.0
30 1/16
763.6
31
787.4
32
812.8
44
7/8
22.2
33 5/16
846.1
176
80
32"
32.0
812.8
37 1/16
941.4
1 13/16
46
4 1/4
107.9
32 1/16
814.4
33 1/16
839.8
34
863.6
48
7/8
22.2
35 7/16
900.1
203
92
34"
34.0
863.6
39 9/16
1004.9
1 15/16 4 11/32
49.2
110.3
34 1/16
865.2
35 1/8
892.2
36 1/4
920.7
40
1
25.4
37 11/16
957.3
249
113
36"
36.0
914.4
41 5/8
1057.3
2 1/16
52.4
4 5/8
117.5
36 1/16
916.0
37 3/16
944.6
38 1/4
971.5
44
1
25.4
39 3/4
1009.6
284
129
42"
42.0
1066.8
48 1/4
1225.5
2 5/16
58.7
5 1/4
133.3
42 1/8
1070.0
43 3/8
1101.7
44 1/2
1130.3
48
1 1/8
28.6
46 1/8
1171.6
406
184
48"
48.0
1219.2
54 13/16
1392.2
2 9/16
65.1
5 7/8
149.2
48 1/8
1222.4
49 1/2
1257.3
50 3/4
1289.0
44
1 1/4
31.7
52 9/16
1335.1
509
231
54"
54.0
1371.6
61
1549.4
2 13/16
71.4
6 3/8
161.9
54 1/8
1374.8
55 5/8
1412.9
56 3/4
1441.9
56
1 1/4
31.7
58 3/4
1492.2
632
287
60"
60.0
1524
67 15/16
1725.6
3
76.2
7 1/16
179.4
60 1/8
1527.2
61 13/16
1570.0
63
1600.2
52
1 3/8
34.9
66 7/16
1662.1
855
388
216
J
in.
mm
To be specified by purchaser
Nom.
Size
Hub
Pounds
Kilo
30.11.2007
10:31 Uhr
Seite 217
Pipe
Flange
OD
in.
mm
D
in.
mm
26"
26.0
660.4
28"
J
in.
mm
Raised
Face
Drilling
Template
Appr.
Weight
b
in.
mm
h
in.
mm
a
in.
mm
m
in.
mm
g
in
mm
Num
ber
I
in
mm
k
in
mm
Pounds
Kilo
34 1/8
866.8
3 1/2
88.9
5 11/16
144.5
26 3/16
665.2
27 5/8
701.7
29
736.6
32
1 3/8
34.9
31 5/8
803.3
399
181
28.0
711.2
36 1/4
920.7
3 1/2
88.9
5 7/8
149.2
28 3/16
716.0
29 3/4
755.6
31
787.4
36
1 3/8
34.9
33 3/4
857.2
447
203
30"
30.0
762
39
990.6
3 11/16
93.7
3 7/32
158.0
30 1/4
768.4
32
812.8
33 1/4
844.5
36
1 1/2
38.1
36 1/4
920.7
590
268
32"
32.0
812.8
41 1/2
1054.1
4 1/16
103.2
6 5/8
168.3
32 1/4
819.2
34
863.6
35 1/2
901.7
32
1 5/8
41.3
38 1/2
977.9
727
330
34"
34.0
863.6
43 5/8
1108.1
4 1/16
103.2
6 13/16
173.0
34 1/4
869.9
36 1/8
917.6
37 1/2
952.5
36
1 5/8
41.3
40 5/8
1031.9
787
357
36"
36.0
914.4
46 1/8
1171.6
4 1/16
103.2
7 1/8
181.0
36 1/4
920.7
38
965.2
39 3/4
109.6
32
1 3/4
44.4
42 7/8
1089.0
893
405
42"
42.0
1066.8
52 1/2
1333.5
4 11/16
119.1
8 1/16
204.8
42 5/16
1074.7
44
1117.6
46
1168.4
36
1 7/8
47.6
49
1244.6
1252
568
48"
48.0
1219.2
59 1/2
1511.3
5 1/16
128.6
8 13/16
223.8
48 5/16
1227.1
50 5/16
1277.9
52 1/4
1327.1
40
2
50.8
55 3/4
1416.0
1611
731
54"
54.0
1371.6
55 7/8
1673.2
5 3/8
136.5
9 7/16
239.7
54 5/16
1379.5
56 1/2
1435.1
58 1/4
1479.5
48
2
50.8
62 1/8
1578.0
1979
898
60"
60.0
1524
73 15/16
1878.0
60 5/16
1531.9
62 15/16
1598.6
65
1651.0
40
2 3/8
60.3
69 7/16
1763.7
2890
1311
To be specified by purchaser
Nom.
Size
Hub
5 15/16 10 11/16
150.8
271.5
217
30.11.2007
10:31 Uhr
Seite 218
Nominal
Pipe
Size
Minimum Bore
or tapping of
Hub Flange
Nominal
Pipe
Size
Minimum Bore
or tapping of
Hub Flange
Nominal
Pipe
Size
Minimum Bore
or tapping of
Hub Flange
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
3 1/2"
1/2"
1/2"
1/2"
1"
1 1/4"
1 1/4"
1 1/2"
4"
5"
6"
8"
10"
12"
3 1/2"
1 1/2"
1 1/2"
2 1/2"
3"
3 1/2"
3 1/2"
14"
16"
18"
20"
4"
4"
4"
4"
24"
4"
Reducing Flanges
Drilling, OD, Thickness and Facing Dimensions
Flange drilling, OD, thickness and facing are the same as those of the standard flange of the size from
which the reduction is being made.
Hub Dimensions
Threaded and Slip-on Flanges
The hub dimensions shall be at least as large as those of the standard flange of the size to which the
reduction is being made. The hub may be larger or omitted.
Welding Neck Flanges
The hub dimensions shall be the same as those of the standard flange of the size to which the reduction is being made.
218
30.11.2007
10:31 Uhr
Seite 219
Orifice Flanges
300-1500lb/sq. in.
Fittings & Flanges
Orifice flanges are manufactured in sizes from 1" to 24" as welding neck, slip-on or threaded flanges.
The two tap holes of each orifice flanges are provided with plugs.
All orifice flanges are drilled and machined for the installation of a jack screw.
Dimensions:
The dimensions are in accordance with those of the flanges standardized to ANSI B 16.5.
Tap Holes:
1/2" API-thread for flanges class 300, 400 and 600.
3/4" API-thread for flanges class 900 and 1500.
219
30.11.2007
10:31 Uhr
Seite 220
Nominal Size
Ring
Groove Dimensions
No.
150
300
400
600
900
1500
2500
Pitch
lb/sq
lb/sq
lb/sq
lb/sg
lb/sq
lb/sq
lb/sq
Dia
in
in
in
in
in
in
300
900
1500
2500
Bottom lb/sq
400
b/sq
b/sq
b/sq
600
in
in
in
meter
max
in
lb/sq
P
1/2"
1/2"
R11
1.344
34.1
1/2"
R12
1.562
39.7
3/4"
3/4"
1/2"
R13
1.688
42.9
3/4"
R14
1.750
44.5
1"
R15
1.875
R16
2.000
+1/4"
1 1/2"
1 1/2"
2"
2"
1"
1 1/4"
1 1/2"
2"
1 1/4"
47.6
1"
1"
3/4"
50.8
R17
2.250
57.2
1 1/4"
1"
R18
2.375
60.3
R19
2.562
R20
2.688
65.1
1 1/2"
68.3
1 1/4"
R21
2.844
72.2
R22
3.250
82.6
1 1/2"
R23
3.250
82.6
2"
R24
3.750
95.3
2 1/2"
R25
4.000
101.6
2 1/2"
2 1/2"
2"
R26
4.000
101.6
2 1/2"
R27
4.250
108.0
2 1/2"
R28
4.375
111.1
220
0.219 0.281
5.6
7.1
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.250 0.344
6.4
8.7
0.312 0.469
in
0.03
2.00
0.8
50.8
0.03
2.38
0.8
60.5
0.03
2.50
2.56
0.8
63.5
65.0
0.03
2.62
0.8
66.5
0.03
2.50
0.08
63.5
0.03
2.75
2.81
2.88
0.8
69.9
71.4
73.2
0.03
3.12
3.19
3.25
0.8
79.2
81.0
82.6
0.03
3.55
3.62
0.8
90.4
91.9
0.03
2.88
0.88
73.2
0.03
3.25
0.8
82.5
0.03
4.00
11.9
0.8
101.6
0.250 0.344
0.03
4.00
0.8
101.6
7.9
6.4
8.7
0.312 0.469
0.03
4.25
4.50
11.9
0.8
108.0
114.3
0.312 0.469
7.9
0.03
4.88
11.9
0.8
124.0
0.250 0.344
0.03
4.75
0.08
120.7
7.9
6.4
8.7
0.312 0.460
0.03
5.00
5.25
11.9
0.8
127.0
133.4
0.312 0.469
7.9
0.03
5.38
11.9
0.8
136.7
0.375 0.531
0.06
5.88
1.5
149.4
7.9
9.5
13.5
30.11.2007
10:31 Uhr
Seite 221
Ring
Groove Dimensions
No.
150
300
400
600
900
1500
2500
Pitch
lb/sq
lb/sq
lb/sq
lb/sg
lb/sq
lb/sq
lb/sq
Dia
Bottom
in
in
in
in
in
in
meter
max
300
900
1500
2500
lb/sq
400
b/sq
b/sq
b/sq
in
600
in
in
in
lb/sq
3"
*)
*)3"
3 1/2"
3 1/2"
R29
4.500
114.3
*)
R30
4.625
117.5
*)3"
3"
R31
4.875
123.8
R32
3"
5.000
127.0
R33
5.188
131.8
3 1/2"
R34
5.188
131.8
3"
R35
5.375
136.5
4"
R36
5.875
149.2
4"
4"
4"
4"
R37
5.875
149.2
R38
4"
4"
R39
6.188
R40
5"
5"
5"
R41
R42
6"
R43
5"
R44
6"
6"
6"
R45
8.7
0.312 0.469
7.9
0.03
5.25
0.8
133.4
0.03
11.9
0.8
0.312 0.469
0.03
5.75
6.12
11.9
0.8
146.1
155
0.375 0.531
0.06
6.62
13.5
0. 8
168.1
0.250 0.344
0.06
6.06
0.8
153.9
7.9
9.5
6.4
8.7
0.312 0.469
0.03
6.25
11.9
0.8
158.8
0.312 0.469
7.9
0.03
6.62
11.9
0.8
168.1
0.250 0.344
0.03
6.75
0.8
171.5
7.9
6.4
8.7
0.312 0.469
0.03
6.88
7.12
11.9
0.8
174.8
180.8
0.438 0.656
7.9
0.06
8.00
1.5
203.2
6.375
0.312 0.469
6.750
7.125
0.03
7.62
11.9
0.8
193.5
0.250 0.344
0.03
7.75
0.8
171.5
7.9
6.4
8.7
0.312 0.469
7.9
0.03
8.25
8.50
11.9
0.8
209.5
215.9
7.500
0.500 0.781
0.06
9.50
190.5
12.7
19.8
1.5
241.3
7.625
0250
0.344
0.03
8.62
193.7
6.4
8.7
0.8
218.9
7.625
193.7
6"
6.4
in
16.7
149.2
5"
0.250 0.344
11.1
149.2
5"
157.2
161.9
5"
8.312
211.1
0.312 0.4690
0.03
9.00
11.9
0.8
228.6
0.312 0.469
0.03
9.50
9.50
0.8
241.3
241.3
7.9
7.9
11.9
1) f= Height of raised portion and depth of grooved dimensions >>E<< but not covered by tolerances for >>E<<
*) For ring joint with lapped flanges in the 300 and 600 lb standards, nng and groove number R 30 are used instead of R 31.
221
Nominal Size
30.11.2007
10:31 Uhr
Seite 222
Nominal Size
Ring
Groove Dimensions
No.
150
300
400
600
900
1500
2500
Pitch
lb/sq
lb/sq
lb/sq
lb/sg
lb/sq
lb/sq
lb/sq
Dia
in
in
in
in
in
in
300
900
1500
2500
Bottom lb/sq
400
b/sq
b/sq
b/sq
600
in
in
in
meter
max
in
lb/sq
P
6"
R46
8.312
211.1
6"
8"
R47
R48
8"
8"
8"
R49
R50
10"
R51
R52
10"
10"
10"
R53
R54
R55
11.0
1.5
279.4
9.750
0.450 0.344
0.03
10.75
0.8
273.1
10.625
R56
12"
12"
12"
R57
11.88
12.12
0.8
301.8
307.8
0.438 0.656
0.06
12.50
16.7
1.5
317.5
11.000
0.562 0.906
0.06
13.38
279.4
14.3
23.0
1.5
339.9
12.750
0.250 0.344
0.03
13.00
0.8
330.2
10.625
12.750
12.750
13.500
15.000
15.000
R58
14
R59
14"
14"
14"
R60
R61
R62
R63
6.4
8.7
0.312 0.469
0.03
14.00
11.9
0.8
355.6 362.0
0.438 0.656
7.9
14.25
0.06
14.62
16.7
1.5
371.5
0.688 1.188
0.09
16.75
30.2
2.30
425.5
0.250 0.344
0.03
16.00
0.8
406.4
11.1
17.5
6.4
8.7
16.25
16.50
412.8
419.1
15.000
0.562 0.906
0.06
17.25
381.0
14.3
23.0
1.5
438.2
15.625
0.250 0.344
0.03
16.75
0.8
425.5
0.312 0.469
7.9
6.4
8.7
16.000
0.688 1.312
0.09
19.50
406.4
17.5 33.30
2.3
495.3
16.500
0.312 0.469
16.500
419.1
14"
11.1
0.8
419.1
14
7.9
0.03
396.9
12"
0.312 0.469
11.9
381.0
12
8.7
11.9
381.0
12"
6.4
0.03
342.90
12
247.7
0.06
323.9
10"
9.75
1.5
19.8
323.9
10
0.06
13.5
12.7
304.8
10"
9.5
in
0.500 0.781
269.9
8"
0.375 0.531
9.000
269.9
8"
228.6
247.7
8"
16.500
419.1
0.03
18.00
11.9
0.8
457.2
0.438 0.656
0.06
13.38
11.9
0.8
466.9
0.625 1.062
0.09
19.50
15.9
2.3
489.0
7.9
7.9
27.0
1) f= Height of raised portion and depth of grooved dimensions >>E<< but not covered by tolerances for >>E<<
222
30.11.2007
10:31 Uhr
Seite 223
Ring
Groove Dimensions
No.
150
300
400
600
900
1500
2500
Pitch
lb/sq
lb/sq
lb/sq
lb/sg
lb/sq
lb/sq
lb/sq
in
in
in
in
in
in
Depth
300
900
1500
2500
Dia
Bottom
lb/sq
400
b/sq
b/sq
b/sq
meter
max
in
600
in
in
in
lb/sq
P
16
R64
0.344
0.03
19.00
8.7
0.8
482.6
18.500 0.312
0.469
0.03
20.00
469.9
11.9
0.8
508.0
18.500 0.438
0.656
0.06
20.62
469.9
16.7
1.5
523.7
18.500 0.688
1.188
0.09
469.9
16.7
1.5
0.344
0.03
21.50
8.7
0.8
546.1
21.000 0.312
0.469
0.03
22.62
533.4
11.9
0.8
574.5
0.781
0.06
23.38
593.9
17.875 0.250
454.0
16"
16"
16"
R65
16
R66
16"
18
R67
R68
18"
18"
R69
18
20
20"
24
19.8
1.5
1.188
0.09
24.12
533.4
30.2
2.3
612.6
0.344
0.03
23.50
596.9
22.000 0.250
8.7
0.8
23.000 0.375
0.531
0.06
25.00
584.2
13.5
1.5
635.0
24"
0.781
0.06
25.50
647.7
12.7
19.8
1.5
23.000 0.688
1.312
0.09
584.2
33.3
2.3
0.344
0.03
28.20
8.7
0.8
711.2
27.250 0.438
0.656
0.06
29.50
692.2
16.7
1.5
749.3
1.062
0.09
30.38
27.0
2.3
771.7
27.250 0.812
1.438
0.09
31.75
692.2
36.50
2.3
793.8
R78
R79
17.5
26.500 0.250
6.4
11.1
27.250 0.625
692.2
24"
9.5
R75
R77
24
6.4
23.000 0.500
673.1
24"
17.5
R74
R76
24"
7.9
12.7
584.2
20"
6.4
21.50
523.7
21.000 0.688
R73
20
11.1
R71
558.86
20"
11.1
21.000 0.500
R72
20"
7.9
in
R70
533.4
18"
6.4
20.375 0.250
517.5
18"
15.9
20.6
26.50
673.1
1) f= Height of raised portion and depth of grooved dimensions >>E<< but not covered by tolerances for >>E<<
223
Nominal Size
30.11.2007
10:31 Uhr
Seite 224
Nom.
Inside Dia.
Pipe
Outside Diameter
of Large
Size
Outside Diameter
and Small
11/4
11/2
Groove
Large Male
Small
Small
Large
Small
Small
Small
Large
and Large
Male
Tongue
Female
Female
Groove
Female
Female
1.38
0.72
1.38
1.00
1.44
0.78
1.44
0.94
1.75
1.81
35.1
18.3
35.1
25.4
36.61
19.8
36.6
23.9
44.5
46.0
Tongue
3/4
Diameter
of Large
and Small
Tongue
1/2
Inside Diam.
and Large
U
1.69
0.94
1.69
1.31
1.75
1.00
1.75
1.25
2.06
2.12
42.9
23.9
42.9
33.3
44.5
25.4
44.5
31.8
52.3
53.8
2.00
1.19
1.88
1.50
2.06
1.25
1.94
1.44
2.25
2.44
50.8
30.2
47.8
38.1
52.3
31.8
49.3
36.6
57.2
62.0
2.50
1.50
2.25
1.88
2.56
1.56
2.31
1.81
2.62
2.94
63.5
38.1
57.2
47.8
65.0
39.6
58.7
46.0
66.5
74.7
2.88
1.75
2.50
2.12
2.94
1.81
2.56
2.06
2.88
3.31
73.2
44.5
63.5
53.8
74.7
46.0
65.0
52.3
73.2
84.1
3.62
2.25
3.25
2.88
3.69
2.31
3.31
2.81
3.62
4.06
91.9
57.2
82.6
73.2
93.7
58.7
84.1
71.4
91.9
103.1
21/2
4.12
2.69
3.75
3.38
4.19
2.75
3.81
3.31
4.12
4.56
104.6
68.3
95.3
85.9
106.4
69.9
96.8
84.1
104.6
115.8
31/2
5.00
3.31
4.62
4.25
5.06
3.38
4.69
4.19
5.00
5.44
127.0
84.1
117.3
108.0
128.5
85.9
119.1
106.4
127.0
138.2
5.50
3.81
5.12
4.75
5.56
3.88
5.19
4.69
5.50
5.94
139.7
96.8
130.0
120.7
141.2
98.6
131.8
119.1
139.7
150.9
6.19
4.31
5.69
5.19
6.25
4.38
5.75
5.12
6.19
6.62
157.2
109.5
144.5
131.8
158.8
111.3
146.1
130.0
157.2
168.1
Large male and female face and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
224
30.11.2007
10:31 Uhr
Seite 225
Nom.
Inside Dia.
Pipe
Outside Diameter
of Large
Size
Outside Diameter
and Small
Diameter
of Large
and Small
Tongue
Groove
Large Male
Small
Small
Large
Small
Small
Small
Large
and Large
Male
Tongue
Female
Female
Groove
Female
Female
Tongue
g
5
Inside Diam.
and Large
U
7.31
5.38
6.81
6.31
7.38
5.44
6.88
6.25
7.31
7.75
185.7
136.7
173.0
160.3
187.5
138.2
174.8
158.8
185.7
196.9
8.50
6.38
8.00
7.50
8.56
6.44
8.06
7.44
8.50
8.94
215.9
162.1
203.2
190.5
217.4
163.6
204.7
189.0
215.9
227.1
10.62
8.38
10.00
9.38
10.69
8.44
10.06
9.31
10.62
11.06
269.7
212.9
254.0
238.3
217.5
214.4
255.5
236.5
269.7
280.9
10
12.75
10.50
12.00
11.25
12.81
10.56
12.06
11.19
12.75
13.19
323.9
266.7
304.8
285.8
325.4
268.3
306.3
284.2
323.9
335.0
15.00
12.50
14.25
13.50
15.06
12.56
14.31
13.44
15.00
15.44
381.0
317.5
362.0
342.9
382.5
319.0
363.5
341.4
381.0
392.2
12
14
16
18
20
24
16.25
13.75
15.50
14.75
16.31
13.81
15.56
14.69
16.25
16.69
412.8
349.3
393.7
374.7
414.3
350.8
395.2
373.1
412.8
423.9
18.50
15.75
17.62
16.75
18.56
15.81
17.69
16.69
18.50
18.94
469.9
400.1
447.5
425.5
471.4
401.6
449.3
423.9
469.9
481.1
21.00
17.75
20.12
19.25
21.06
17.81
20.19
19.19
21.00
21.44
533.4
450.9
511.0
489.0
534.9
452.4
512.8
487.4
533.4
544.6
23.00
19.75
22.00
21.00
23.06
19.81
22.06
20.94
23.00
23.44
584.2
501.7
558.8
533.4
585.7
503.2
560.3
531.9
584.2
595.4
27.25
23.75
26.25
25.25
27.31
23.81
26.31
25.19
27.25
27.69
692.2
603.3
666.8
641.4
693.7
604.8
668.3
639.8
692.2
703.3
Large male and female face and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
225
30.11.2007
10:31 Uhr
Seite 226
Flanges
Flanges corresponding to German standards for tubing and piping to DiN and ISO
Types of flange
2631
2632
2633
2634
2635
(PN 6)
(PN 10)
(PN 16)
(PN 25)
(PN 40)
(PN 64)
DN
DN
DN
DN
DN
DN
10-100
10-100
10-100
10-100
10-500
10-400
2637
2638
2628
2629
2627
Block Flanges
(PN 160)
(PN 160)
(PN 250)
(PN 320)
(PN 400)
DN
DN
DN
DN
DN
10-350
10-300
10-250
10-250
10-200
2573
2576
2566
(PN 6)
(PN 10)
(PN 10-16)
2636
28117
(PN 10-40)
DN
15-500
Seamless long/Welding
neck for pressure vessels
Blind Flanges
226
DN
DN
DN
10-500
10-500
6-100
2641
2642
2655
2656
(PN 6)
(PN 10)
(PN 25)
(PN 40)
DN
DN
DN
DN
10-1000
10-800
200-500
10-400
2673
2674
2675
2676
(PN 10)
(PN 16)
(PN 25)
(PN 40)
DN
DN
DN
DN
10-1000
10-500
200-500
10-500
28115
28031
28032
28034
DN
DN
DN
25-500
300-1100
300-1100
2527
2527
(PN 6)
28036
28038
DN
DN
DN
300-1100
300-1100
1000-1100
2527
2527
2527
2527
2527
(PN 10)
(PN 16)
(PN 25)
(PN 40)
(PN 64)
(PN 100)
DN
DN
DN
DN
DN
DN
DN
10-300
200-500
10-500
175-500
10-500
50-400
10-350
(PN 10-40)
30.11.2007
10:31 Uhr
Seite 227
Weld-Neck-Flange
DIN 2631 PN6
NB
Flange
RF
Stud Bolt
pc.
Part 1 Part 2
10
10
15
15
20
20
25
25
32
32
40
40
50
50
65
80
100
100
125
125
150
150
200
250
250
300
350
350
400
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
Meck
d1
17.2
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
168.3
219.1
273
323.9
355.6
406.4
508
610
711
813
914
1016
1220
1420
1620
1820
2020
2220
2420
2620
2820
3020
3220
3420
3620
14
20
25
30
38
44.5
57
108
133
159
267
368
419
-
h1
d3
h2
d4
75
75
80
80
90
90
100
100
120
120
130
130
140
140
160
190
210
210
240
240
265
265
320
375
375
440
490
490
540
540
645
755
860
975
1075
1175
1405
1630
1830
2045
2265
2475
2685
2905
3115
3315
3525
3735
3970
12
12
12
12
14
14
14
14
14
14
14
14
14
14
14
16
16
16
18
18
18
18
20
22
22
22
22
22
22
22
24
24
24
24
26
26
28
32
34
36
38
42
44
46
48
50
54
56
60
50
50
55
55
65
65
75
75
90
90
100
100
110
110
130
150
170
170
200
200
225
225
280
335
335
395
445
445
495
495
600
705
810
920
1020
1120
1340
1560
1760
1970
2180
2390
2600
2810
3020
3220
3430
3640
3860
28
28
30
30
32
32
35
35
35
35
38
38
38
38
38
42
45
45
48
48
48
48
55
60
60
62
62
62
65
65
68
70
70
70
70
70
90
90
90
100
110
115
125
130
135
140
150
160
165
22
26
28
30
35
38
40
42
50
55
58
62
70
74
88
102
122
130
148
155
172
184
236
282
290
342
385
385
438
438
538
640
740
842
942
1045
1248
1452
1655
1855
2058
2260
2462
2665
2865
3068
3272
3475
3678
1.8
1.8
2
2
2.3
2.3
2.6
2.6
2.6
2.6
2.6
2.6
2.9
2.9
2.9
3.2
3.6
3.6
4
4
4.5
4.5
5.9
6.3
6.3
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
8
8
9
10
11
12
13
14
15
16
16
18
18
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
8
8
8
8
8
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
16
16
16
16
16
16
18
18
18
18
18
20
20
20
6
6
6
6
6
6
6
6
6
6
7
7
8
8
9
10
10
10
10
10
12
12
15
15
15
15
15
15
15
15
15
16
16
16
16
16
20
20
20
20
25
25
25
25
30
30
30
35
35
35
35
40
40
50
50
60
60
70
70
80
80
90
90
110
128
148
148
178
178
202
202
258
312
312
365
415
415
465
465
570
670
775
880
980
1080
1295
1510
1710
1920
2125
2335
2545
2750
2960
3160
3370
3580
3790
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
thread
Weight of
D2
a Flange
(7,85 kg/dm3)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
12
12
16
16
20
20
24
24
24
28
32
36
40
44
48
52
56
60
64
68
72
76
80
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M24
M24
M27
M27
M27
M30
M33
M33
M36
M39
M39
M39
M45
M45
M45
M45
M45
M52
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
26
26
30
30
30
33
36
36
39
42
42
42
48
48
48
48
48
56
0.335
0.335
0.392
0.392
0.592
0.592
0.747
0.747
1.050
1.050
1.180
1.180
1.340
1.340
1.670
2.710
3.240
3.240
4.490
4.490
5.150
5.150
7.780
10.80
10.80
14.00
18.50
16.70
21.20
19.00
28.60
31.50
37.40
46.10
55.60
61.90
100.0
149.0
180.0
225.0
295.0
361.0
415.0
530.0
643.0
777.0
851.0
993.0
1001
227
Nominal Bore
30.11.2007
10:31 Uhr
Seite 228
Weld-Neck-Flange
DIN 2632 PN 10
Nominal Bore
NB
Flange
Meck
RF
Stud Bolt
d1
Part 1
200 219.1
pc.
Part 2
h1
d3
h2
d4
thread
Weight of
D2
a Flange
(7,85 kg/dm3)
340
24
295
62
235
5.9
10
16
268
M20
22
11.3
250
267
395
26
350
68
285
6.3
12
16
320
12
M20
22
14.7
250
273
395
26
350
68
292
6.3
12
16
320
12
M20
22
14.7
300 323.9
445
26
400
68
344
7.1
12
16
370
12
M20
22
17.4
350 355.6
505
26
460
68
385
7.1
12
16
430
16
M20
22
23.6
368
505
26
460
68
385
7.1
12
16
430
16
M20
22
21.6
565
26
515
72
440
7.1
12
16
482
16
M24
26
28.6
565
26
515
72
440
7.1
12
16
482
16
M24
26
26.2
350
400 406.4
400
419
500
508
670
28
620
75
542
7.1
12
16
585
20
M24
26
38.1
600
610
780
28
725
80
642
7.1
12
18
685
20
M27
30
44.6
700
711
895
30
840
80
745
12
18
800
24
M27
30
62.4
800
813
1015
32
950
90
850
12
18
905
24
M30
33
84.1
900
98.5
914
1115
34
1050
95
950
10
12
20
1005
28
M30
33
1000 1016
1230
34
1160
95
1052
10
16
20
1110
28
M33
36
115.0
1200 1220
1455
38
1380
115
1255
11
16
25
1330
32
M36
39
182.0
1400 1420
1675
42
1590
120
1460
12
16
25
1535
36
M39
42
248.0
1600 1620
1915
46
1820
130
1665
14
16
25
1760
40
M45
48
347.0
1800 1820
2115
50
2020
140
1868
15
16
30
1960
44
M45
48
430.0
2000 2020
2325
54
2230
150
2072
16
16
30
2170
48
M45
48
539.0
2200 2220
2550
58
2440
160
2275
18
18
35
2370
52
M52
56
658.0
2400 2420
2760
62
2650
170
2478
20
18
35
2570
56
M52
56
825.0
2600 2620
2960
66
2850
180
2680
22
18
40
2780
60
M52
56
979.0
2800 2820
3180
70
3070
190
2882
22
18
40
3000
64
M52
56
1156.0
3000 3020
3405
75
3290
200
3085
24
18
45
3210
68
M56
62
1402.0
From NB 10 up to NB 150 Weld-Neck-Flange acc.to DIN 2633, use nomimal pressure 16.
The values in Part 2 are applicable for German standards.
228
30.11.2007
10:31 Uhr
Seite 229
Weld-Neck-Flange
DIN 2633 PN 16
NB
Flange
Meck
RF
Stud Bolt
d1
pc.
Part 1 Part 2
h1
d3
h2
d4
thread
Weight of
D2
a Flange
(7,85 kg/dm3)
10
10
17.2
14
-
90
90
14
14
60
60
35
35
25
28
1.8
1.8
4
4
6
6
40
40
2
2
4
4
M12
M12
14
14
0.580
0.580
15
15
21.3
20
-
95
95
14
14
65
65
35
35
30
32
2
2
4
4
6
6
45
45
2
2
4
4
M12
M12
14
14
0.648
0.648
20
20
26.9
25
-
105
105
16
16
75
75
38
38
38
40
2.3
2.3
4
4
6
6
58
58
2
2
4
4
M12
M12
14
14
0.952
0.952
25
25
33.7
30
-
115
115
16
16
85
85
38
38
42
45
2.6
2.6
4
4
6
6
68
68
2
2
4
4
M12
M12
14
14
1.140
1.140
32
32
42.4
38
-
140
140
16
16
100
100
40
40
52
56
2.6
2.6
6
6
6
6
78
78
2
2
4
4
M16
M16
18
18
1.690
1.690
40
40
48.3
44.5
-
150
150
16
16
110
110
42
42
60
64
2.6
2.6
6
6
7
7
88
88
3
3
4
4
M16
M16
18
18
1.860
1.860
50
50
63.3
57
-
465
165
18
18
125
125
45
45
72
75
2.9
2.9
6
6
8
8
102
102
3
3
4
4
M16
M16
18
18
2.530
2.530
65
80
76.1
88.9
185
200
18
20
145
160
45
50
90
105
2.9
3.2
6
8
10
10
122
138
3
3
4
8
M16
M16
18
18
3.060
3.700
100
100
114.3
108
-
220
220
20
20
180
180
52
52
125
131
3.6
3.6
8
8
12
12
158
158
3
3
8
8
M16
M16
18
18
4.620
4.620
125
125
139.7
133
-
250
250
22
22
210
210
55
55
150
156
4
4
8
8
12
12
188
188
3
3
8
8
M16
M16
18
18
6.300
6.300
150
150
168.3
159
-
285
285
22
22
240
240
55
55
175
184
4.5
4.5
10
10
12
12
212
212
3
3
8
8
M20
M20
22
22
7.750
7.750
175
200
193.7
219.1
315
340
24
24
270
295
60
62
210
235
5.4
5.9
10
10
12
16
242
268
3
3
8
12
M20
M20
22
22
9.850
11.00
250
250
273
267
-
405
405
26
26
355
355
70
70
285
292
6.3
6.3
12
12
16
16
320
320
3
3
12
12
M24
M24
26
26
15.60
15.60
300
350
323.9
355.6
460
520
28
30
410
470
78
82
344
390
7.1
8
12
12
16
16
378
438
4
4
12
16
M24
M24
26
26
22.00
31.20
350
400
406.4
368
-
520
580
30
32
470
525
82
85
390
445
8
8
12
12
16
16
438
490
4
4
16
16
M24
M27
26
30
28.80
39.30
500
600
508
610
715
840
34
36
650
770
90
95
548
652
8
8.8
12
12
16
18
610
725
4
5
20
20
M30
M33
33
36
61.00
75.40
700
800
711
813
910
1025
36
38
840
950
100
105
755
855
8.8
10
12
12
18
20
795
900
5
5
24
24
M33
M36
36
39
77.00
101.0
900 914
1000 1016
1125
1255
40
42
1050
1170
110
120
955
1058
10
10
12
16
20
22
1000
1115
5
5
28
28
M36
M39
39
42
122.0
162.0
1200 1220
1400 1420
1485
1685
48
52
1390
1590
130
145
1262
1465
12.5
14.2
16
16
30
30
1330
1530
5
5
32
36
M45
M45
48
48
243.0
323.0
1600 1620
1800 1820
1930
2130
58
62
1820
2020
160
170
1668
1870
16
17.5
16
16
35
35
1750
1950
5
5
40
44
M52
M52
56
56
479.0
599.0
2000 2020
2345
66
2230
180
2072
20
16
40
2150
48
M56
62
719.0
229
Nominal Bore
30.11.2007
10:31 Uhr
Seite 230
Weld-Neck-Flange
DIN 2634 PN 25
Nominal Bore
NB
Flange
Part 1 Part 2
175
193
200 219.1
250
-
Meck
RF
Stud Bolt
d1
D
h1
d3
h2
d4
330
28
280
75
218
5.6
10
15
248
Weight of
pc.
thread
D2
12
M24
26
a Flange
(7,85 kg/dm3)
13.40
360
30
310
80
244
6.3
10
16
278
12
M24
26
17.00
267
425
32
370
88
292
7.1
12
18
335
12
M27
30
24.40
273
425
32
370
88
298
7.1
12
18
335
12
M27
30
24.40
300 323.9
485
34
430
92
352
12
18
395
16
M27
30
31.20
350 355.6
555
38
490
100
398
12
20
450
16
M30
33
47.20
368
555
38
490
100
398
12
20
450
16
M30
33
44.20
400 406.4
620
40
550
110
452
8.8
12
20
505
16
M33
36
61.70
419
620
40
550
110
452
8.8
12
20
505
16
M33
36
57.90
500
508
730
44
660
125
558
10
12
20
615
20
M33
36
89.60
600
510
845
46
770
125
660
11
12
20
720
20
M36
39
104.0
700
711
960
46
875
125
760
12.5
12
20
820
24
M39
42
136.0
800
813
1085
50
990
135
865
14.2
12
22
930
24
M45
48
186.0
900
914
1185
54
1090
145
968
16
12
24
1030
28
M45
48
236.0
1000 1016
1320
58
1210
155
1070
17.5
16
24
1140
28
m52
56
307.0
230
30.11.2007
10:31 Uhr
Seite 231
Weld-Neck-Flange
DIN 2635 PN 40
Flange
Meck
RF
Stud Bolt
d1
Part 1 Part 2
Weight of
pc.
thread
D2
a Flange
h1
d3
h2
d4
14
90
16
60
35
25
1.8
40
M12
14
0.661
17.2
90
16
60
35
28
1.8
40
M12
14
0.661
20
95
16
65
38
30
45
M12
14
0.746
15
21.3
95
16
65
38
32
45
M12
14
0.746
20
25
105
18
75
40
38
2.3
58
M12
14
1.060
20
26.9
105
18
75
40
40
2.3
58
M12
14
1.060
25
30
115
18
85
40
42
2.6
68
M12
14
1.290
25
33.7
115
18
85
40
46
2.6
68
M12
14
1.290
32
38
140
18
100
42
52
2.6
78
M16
18
1.880
32
42.4
140
18
100
42
56
2.6
78
M16
18
1.880
40
44.5
150
18
110
45
60
2.6
88
M16
18
2.330
40
48.3
150
18
110
45
64
2.6
88
M16
18
2.330
50
57
165
20
125
48
72
2.9
102
M16
18
2.820
50
60.3
165
20
125
48
75
2.9
102
M16
18
2.820
65
76.1
185
22
145
52
90
2.9
10
122
M16
18
3.740
80
88.9
200
24
160
58
105
3.2
12
138
M16
18
4.750
100
108
235
235
24
190
65
128
3.6
12
162
M20
22
6.520
235
24
190
65
134
3.6
12
162
M20
22
6.520
133
270
26
220
68
155
12
188
M24
26
9.070
9.070
10
10
15
100 114.3
125
125 139.7
(7,85 kg/dm3)
270
26
220
68
162
12
188
M24
26
159
300
28
250
75
182
4.5
10
12
218
M24
26
11.80
150 168.3
300
28
250
75
192
4.5
10
12
218
M24
26
11.80
(175) 193.7
350
32
295
82
218
5.6
10
15
260
12
M27
30
18.20
200 219.1
375
34
320
88
244
6.3
10
16
285
12
M27
30
21.50
150
250
267
450
38
385
105
298
7.1
12
18
345
12
M30
33
34.90
250
273
450
38
385
105
306
7.1
12
18
345
12
M30
33
34.90
300 323.9
515
42
450
115
362
12
18
410
16
M30
33
49.70
350 355.6
580
46
510
125
408
8.8
12
20
465
16
M33
36
68.10
368
580
46
510
125
408
8.8
12
20
465
16
M33
36
68.10
660
50
585
135
462
11
12
20
535
16
M36
39
96.50
350
400 406.4
400
419
660
50
585
135
462
11
12
20
535
16
M36
39
96.50
500
508
755
52
670
140
562
14.2
12
20
615
20
M39
42
117.0
231
Nominal Bore
NB
30.11.2007
10:31 Uhr
Seite 232
Weld-Neck-Flange
DIN 2636 PN 64
Nominal Bore
NB
Flange
Meck
RF
Stud Bolt
d1
pc.
Part 1 Part 2
50
h1
d3
h2
d4
thread
Weight of
D2
a Flange
(7,85 kg/dm3)
57
180
26
135
62
78
2.9
10
102
M20
22
4.550
60.3
180
26
135
62
82
2.9
10
102
M20
22
4.550
65
76.1
205
26
160
68
98
3.2
12
122
M20
22
5.730
80
88.9
215
28
170
72
112
3.6
12
138
M20
22
6.690
100
108
250
30
200
78
132
12
162
M24
26
9.660
114.3
250
30
200
78
138
12
162
M24
26
9.660
133
295
34
240
88
162
4.5
12
188
M27
30
15.10
125
139.7
295
34
240
88
168
4.5
12
188
M27
30
15.10
159
345
36
280
95
192
5.6
10
12
218
M30
33
21.90
168.3
345
36
280
95
202
5.6
10
12
218
M30
33
21.90
(175) 193.7
375
40
310
105
228
6.3
10
16
260
12
M30
33
23.70
150
200
219.1
415
42
345
110
256
7.1
10
16
285
12
M33
36
34.90
250
267
470
46
400
125
310
8.8
12
18
345
12
M33
36
49.60
273
470
46
400
125
316
8.8
12
18
345
12
M33
36
49.60
300 323.9
530
12
460
140
372
11
12
18
410
16
M33
36
68.70
350 355.6
600
56
525
150
420
12.5
12
20
465
16
M36
39
94.60
600
56
525
150
420
12.5
12
20
465
16
M36
39
94.60
670
60
585
160
475
14.2
12
20
535
16
M39
42
670
60
585
160
475
14.2
12
20
535
16
M39
42
124.0
368
400 406.4
-
419
124.0
232
30.11.2007
10:31 Uhr
Seite 233
Weld-Neck-Flange
DIN 2637 PN 100
NB
Flange
15
25
40
50
RF
Stud Bolt
pc.
Part 1 Part 2
10
Meck
d1
D
h1
d3
h2
d4
thread
Weight of
D2
a Flange
(7,85 kg/dm3)
14
100
20
70
45
28
1.8
40
M12
14
1.090
17.2
100
20
70
45
32
1.8
40
M12
14
1.090
1.190
20
105
20
75
45
32
45
M12
14
21.3
105
20
75
45
34
45
M12
14
1.190
30
140
24
100
58
48
2.6
68
M16
18
2.660
33.7
140
24
100
58
52
2.6
68
M16
18
2.660
44.5
170
26
125
62
65
2.9
10
88
M20
22
4.090
48.3
170
26
125
62
70
2.9
10
88
M20
22
4.090
5.980
57
195
28
145
68
86
3.2
10
102
M24
26
60.3
195
28
145
68
90
3.2
10
102
M24
26
5.980
65
76.1
220
30
170
76
108
3.6
12
122
M24
26
7.910
80
88.9
230
32
180
78
120
12
138
M24
26
8.950
100
108
265
36
210
90
145
12
162
M27
30
13.70
114.3
265
36
210
90
150
12
162
M27
30
13.70
133
315
40
250
105
180
6.3
12
188
M30
33
22.70
125
150
139.7
315
40
250
105
180
6.3
12
188
M30
33
22.70
159
355
44
290
115
210
7.1
10
12
218
12
M30
33
30.20
168.3
355
44
290
115
210
7.1
10
12
218
12
M30
33
30.20
38.90
175 193.7
385
48
320
127
245
8.8
10
16
260
12
M30
33
200 219.1
430
52
360
130
278
10
10
16
285
12
M33
36
52.80
267
505
60
430
157
340
12.5
12
18
345
12
M36
39
81.40
273
81.40
250
505
60
430
157
340
12.5
12
18
345
12
M36
39
300 323.9
585
68
500
170
400
14.2
12
18
410
16
M39
42
122.0
350 355.6
655
74
560
189
460
16
12
20
465
16
M45
48
165.0
368
655
74
560
189
460
16
12
20
465
16
M45
48
165.0
233
Nominal Bore
30.11.2007
10:31 Uhr
Seite 234
Weld-Neck-Flange
DIN 2638 PN160
Nominal Bore
NB
Flange
Meck
RF
Stud Bolt
d1
pc.
Part 1 Part 2
thread
Weight of
D2
a Flange
h1
d3
h2
d4
14
100
20
70
45
28
40
M12
14
1.090
(7,85 kg/dm3)
10
10
17.2
100
20
70
45
32
40
M12
14
1.090
15
20
105
20
75
45
32
45
M12
14
1.190
15
21.3
105
20
75
45
34
45
M12
14
1.190
25
30
140
24
100
58
48
2.9
68
M16
18
2.660
25
33.7
140
24
100
58
52
2.9
68
M16
18
2.660
40
44.5
170
28
125
64
65
3.6
10
88
M20
22
4.300
40
48.3
170
28
125
64
70
3.6
10
88
M20
22
4.300
50
57
195
30
145
75
86
10
102
M24
26
6.250
50
60.3
195
30
145
75
90
10
102
M24
26
6.250
65
76.1
220
34
170
82
108
12
122
M24
26
8.350
80
88.9
230
36
180
86
120
6.3
12
138
M24
26
9.750
100
108
265
40
210
100
145
12
162
M27
30
14.80
100
114.3
265
40
210
100
150
12
162
M27
30
14.80
125
133
315
44
250
115
180
10
14
188
M30
33
23.00
125
139.7
315
44
250
115
180
10
14
188
M30
33
23.00
150
159
355
50
290
128
210
12.5
10
14
218
12
M30
33
32.50
150
168.3
355
50
290
128
210
12.5
10
14
218
12
M30
33
32.50
175
193.7
390
54
320
138
245
14.2
10
16
260
12
M33
36
43.50
200
219.1
430
60
360
140
278
16
10
16
285
12
M33
36
59.40
250
267
515
68
430
155
340
20
12
18
345
12
M39
42
94.50
250
273
515
68
430
155
340
20
12
18
345
12
M39
42
94.50
300
323.9
585
78
500
175
400
22.2
12
18
410
16
M39
42
136.0
234
30.11.2007
10:31 Uhr
Seite 235
Plain Flanges
DIN 2573 PN6
Flange
Stud Bolt
d1
10
15
20
25
32
40
50
pc.
thread
Weight of
d2
a Flange
Part 1
Part 2
d5
75
12
50
M10
11
0.363
80
12
55
M10
11
0.410
90
14
65
M10
11
0.600
100
14
75
M10
11
0.740
120
16
90
M12
14
1.190
130
16
100
M12
14
1.390
140
16
110
M12
14
1.530
14
14.5
17.2
17.7
20
21
21.3
22
25
26
26.9
27.6
30
31
33.7
34.4
38
39
42.4
43.1
44.5
45.5
48.3
49
57
58.1
60.3
61.1
(7,85 kg/dm3)
65
76.1
77.1
160
16
130
M12
14
1.890
80
88.9
90.3
190
18
150
M16
18
2.980
108
109.6
210
18
170
M16
18
3.460
240
20
200
M16
18
4.600
265
20
225
M16
18
5.220
100
114.3
125
150
115.9
133
134.8
139.7
141.6
159
161.1
168.3
170.5
200
219.1
221.8
320
22
280
M16
18
7.150
250
267
270.2
375
24
335
12
M16
18
9.610
273
276.2
300
323.9
327.6
440
24
395
12
M20
22
12.60
350
355.6
359.7
490
26
445
12
M20
22
15.60
372.2
411
540
28
495
16
M20
22
18.40
369
400
406.4
419
423.7
450
457
462.3
595
30
550
16
M20
22
21.40
500
508
513.6
645
30
600
20
M20
22
24.60
235
Nominal Bore
NB
30.11.2007
10:31 Uhr
Seite 236
Plain Flanges
DIN 2576 PN10
Nominal Bore
NB
Flange
Stud Bolt
d1
10
15
20
25
32
40
50
pc.
Part 1
Part 2
d5
thread
Weight of
d2
a Flange
14
60
M12
14
0.613
14
65
M12
14
0.675
16
75
M12
14
0.749
16
85
M12
14
1.140
16
100
M16
18
1.660
16
110
M16
18
1.890
18
125
M16
18
2.510
14
14.5
90
17.2
17.7
0.605
20
21
95
21.3
22
0.669
25
26
105
26.9
27.6
0.936
30
31
115
33.7
34.4
1.110
38
39
140
42.4
43.1
1.620
44.5
45.5
150
48.3
49
1.860
(7,85 kg/dm3)
57.0
58.1
165
60.3
61.1
2.470
65
76.1
77.1
185
18
145
M16
18
3.000
80
88.9
90.3
200
20
160
M16
18
3.790
100
108
109.6
220
20
180
M16
18
4.200
114.3
115.9
4.030
22
210
M16
18
5.710
22
240
M20
22
6.720
125
150
133
134.8
250
139.70
141.6
5.460
159
161.1
285
168.30
170.5
6.570
175
193.7
196.1
315
24
270
M20
22
8.450
200
219.1
221.8
340
24
295
M20
22
9.310
250
267
270.2
395
26
350
12
M20
22
12.50
273
276.2
11.90
300
323.9
327.6
445
26
400
12
M20
22
13.80
350
355.6
359.7
505
28
460
16
M20
22
20.60
368
372.2
19.00
32
515
16
M24
26
27.90
400
406.4
411
565
419
423.7
25.90
450
457.4
462.3
615
38
565
20
M24
26
35.60
500
508
513.6
670
38
620
20
M24
26
41.10
236
30.11.2007
10:31 Uhr
Seite 237
Pipe Size
NB
d1
Series 1 Series 2
10
10
15
15
20
20
25
25
32
32
40
40
50
50
65
80
100
100
125
125
150
150
200
250
250
300
350
350
400
400
500
600
700
800
900
1000
1200
17.2
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
168.3
219.1
273
323.9
355.6
406.4
508
610
711
813
914
1016
1220
14
20
25
30
38
44.5
57
108
133
159
267
368
419
-
Flange
D
d6
75
75
80
80
90
100
120
130
140
160
190
210
240
265
320
375
440
490
540
645
755
860
975
1075
1175
1405
16
19
22
24
28
30
33
36
42
46
50
54
62
65
81
94
113
119
138
145
164
173
225
273
279
329
362
374
413
426
517
618
721
824
926
1028
1232
Loose Flange
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
14
14
14
14
14
14
14
16
20
20
24
26
26
28
28
32
36
40
44
48
52
60
50 2
50 2
55 2
55 2
65 2
65 2
75 3
75 3
90 3
90 3
100 3
100 3
110 3
110 3
130 3
150 3
170 3
170 3
200 3
200 3
225 3
225 3
280 3
335 3
335 3
395 4
445 4
445 4
495 4
495 4
600 4
705 4
810 4
920 4
10204
11204
13405
Screws
No. Thread
d2
d5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
8
8
8
12
12
12
12
12
16
16
20
20
24
24
24
28
32
11
11
11
11
11
11
11
11
14
14
14
14
14
14
14
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
26
26
30
30
30
33
14.5
17.7
21
22
26
27.6
31
34.4
39
43.1
45.5
49
58.1
61.1
77.1
90.3
109.6
115.9
134.8
141.6
161.1
170.5
221.8
270.2
276.2
327.6
359.7
372.2
411
423.7
513.6
616.6
718.6
821.5
923.5
1026.7
1232.7
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M24
M24
M27
M27
M27
M30
s2
min
r
min
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
14
14
14
14
14
14
14
16
18
18
18
18
18
20
20
22
22
24
24
26
26
28
3
3
3
3
3
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4
4
4
4
4
5
5
5
-
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
5
35
35
40
40
50
50
60
60
70
70
80
80
90
90
110
128
148
148
178
178
202
202
258
312
312
336
415
415
465
465
570
670
775
880
980
1080
1295
9
9
9
9
12
12
15
15
15
15
17
17
23
23
23
23
28
28
30
30
30
30
30
30
30
35
-
1.8
1.8
2
2
2
2
2
2
2.6
2.6
2.6
2.6
2.6
2.6
2.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4
4
4
-
Weight kg
(7,85 kg/dm3)
Flange Bundle
0.298
0.298
0.337
0.337
0.418
0.418
0.620
0.620
0.874
0.874
1.01
1.01
1.12
1.12
1.35
2.24
2.59
2.59
3.10
3.10
3.52
3.52
4.98
7.67
7.67
12.3
15.1
15.1
17.7
17.7
25.4
36.3
48.1
66.5
81.3
96.4
158
0.0
0.051
0.063
0.063
0.116
0.116
0.166
0.166
0.213
0.213
0.273
0.273
0.359
0.359
0.468
0.730
0.884
0.884
1.21
1.21
1.34
1.34
2.00
2.89
2.89
3.56
4.08
4.08
4.91
4.91
7.39
8.6
14.0
16.8
20.1
21.5
32.6
237
Plain Bundle
30.11.2007
10:31 Uhr
Seite 238
Plain Bundle
Pipe Size
NB
d1
Series 1 Series 2
10
10
15
15
20
20
25
25
32
32
40
40
50
50
65
80
100
100
125
125
150
150
200
250
250
300
350
350
400
400
500
600
700
800
17.2
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
139.7
168.3
219.1
273
323.9
355.6
406.4
508
610
711
813
14
20
25
30
38
44.5
57
108
133
159
267
368
419
-
Flange
D
d6
90
90
95
95
105
105
115
115
140
140
150
150
165
165
185
200
220
220
250
250
285
285
340
395
395
445
505
505
565
565
670
780
895
1015
16
19
22
24
28
30
33
36
42
46
50
54
62
65
81
94
113
119
138
145
164
173
225
273
279
329
362
374
413
426
517
618
721
824
Loose Flange
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
18
18
18
18
18
18
18
20
22
22
26
28
28
32
32
38
44
50
56
60
60
65
65
75
75
85
85
100
100
110
110
125
125
145
160
180
180
210
210
240
240
295
350
350
400
460
460
515
515
620
725
840
950
Screws
e No. Thread
d2
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
7
7
7
14
14
14
14
14
14
14
14
18
18
18
18
18
18
18
18
18
18
18
18
22
22
22
22
22
22
22
26
26
30
30
33
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
8
8
8
8
8
8
8
12
12
12
16
16
16
16
20
20
24
24
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M24
M27
M27
M30
10
10
10
10
12
12
12
12
12
12
12
12
14
14
14
16
16
16
18
18
18
18
20
22
22
22
22
22
24
24
26
26
28
30
40
40
45
45
58
58
68
68
78
78
88
88
102
102
122
138
158
158
188
188
212
212
268
320
320
370
430
430
482
482
585
685
800
905
9
9
9
9
12
12
15
15
15
15
17
17
23
23
23
23
28
28
30
30
30
30
30
30
30
35
-
s1
min
s2
min
r
min
1.8
1.8
2
2
2
2
2
2
2.6
2.6
2.6
2.6
2.6
2.6
2.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.2
4
4
4
-
3
3
3
3
3
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4
4
4
4
4
5
5
5
-
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
7
7
7
Weight kg
(7,85 kg/dm3)
Flange Bundle
0.599
0.599
0.689
0.689
0.806
0.806
1.11
1.11
1.64
1.64
1.86
1.86
2.20
2.20
2.62
3.32
3.67
3.67
4.54
4.54
5.60
5.60
7.46
10.3
10.3
14.0
18.5
18.5
25.0
25.0
37.0
56.3
80.4
113.2
0.087
0.087
0.105
0.105
0.203
0.203
0.276
0.276
0.343
0.343
0.426
0.426
0.618
0.618
0.786
1.10
1.31
1.31
1.96
1.96
2.18
2.18
3.10
4.22
4.22
4.85
6.71
6.71
8.28
8.28
11.5
15.6
23.2
29.2
238
30.11.2007
10:31 Uhr
Seite 239
Blind Flanges
Form B
Form T
Nominal Bore
10
15
20
25
32
40
50
65
80
100
125
150
(175)
200
250
300
350
400
500
Flange
Screws
75
80
90
100
120
130
140
160
190
210
240
265
295
320
375
440
490
540
645
12
12
14
14
14
14
14
14
16
16
18
18
20
20
22
22
22
22
24
50
55
65
75
90
100
110
130
150
170
200
225
255
280
335
395
445
495
600
d9 max.
55
70
90
115
140
165
190
235
285
330
380
475
No.
Thread
d2
M10
11
M12
14
M16
18
M20
22
12
16
20
2.48
3.49
4.86
6.28
7.75
10.7
12.7
19.0
26.3
32.9
40.2
63.2
Blind Flanges
DIN 2527 PN 10
Nominal Bore
Flange
D
Screws
b
d9 max.
No.
Thread
d2
10 up to 175: For Nominal Bore 10 up to 175 Blind Flanges of Nominal Bore 16 are to be used.
200
340
24
295
190
8
M20
22
250
395
26
350
235
12
300
445
26
400
285
350
505
26
460
330
16
400
565
26
515
380
M24
26
500
670
28
620
475
20
16.5
24.0
30.9
40.6
49.4
75.0
16.9
24.7
31.9
41.9
51.2
77.8
239
Blind Flanges
DIN 2527 PN06
30.11.2007
10:31 Uhr
Seite 240
Blind Flanges
Blind Flanges
DIN 2527 PN16
Form B
Form T
Nominal Bore
10
15
20
25
32
40
50
65
80
100
125
150
(175)
200
250
300
350
400
500
Flange
Screws
90
95
105
115
140
150
165
185
200
220
250
285
315
340
405
460
520
580
715
14
14
16
16
16
16
18
18
20
20
22
22
24
24
26
28
30
32
36
60
65
75
85
100
110
125
145
160
180
210
240
270
295
355
410
470
525
650
d9 max.
55
70
90
115
140
165
190
235
285
330
380
475
No.
Thread
d2
M12
14
M16
18
M20
22
M24
26
M27
M30
30
33
12
16
20
3.70
4.83
5.75
8.59
10.6
14.3
16.5
25.6
36.1
49.1
65.3
105
Blind Flanges
DIN 2527 PN 25
Nominal Bore
Flange
D
10 up to 175
(175)
200
250
300
350
400
500
240
Screws
b
d9 max.
No.
Thread
d2
For Nominal Bore 10 up to 175 Blind Flanges of Nominal Pressure 16 are to be used.
330
28
280
165
12
M24
26
17.3
360
30
310
190
22.3
425
32
370
237
M27
30
33.5
485
34
430
285
16
46.3
555
38
490
332
M30
33
68.0
620
40
550
380
M33
36
89.7
730
45
660
475
20
138
17.6
22.7
34.2
47.3
69.3
91.5
141
30.11.2007
10:31 Uhr
Seite 241
Blind Flanges
Form B
Form T
Nominal Bore
10
15
20
25
32
40
50
65
80
100
125
150
(175)
200
250
300
350
400
500
Flange
Screws
90
95
105
115
140
150
165
185
200
220
250
285
315
340
405
460
520
580
715
14
14
16
16
16
16
18
18
20
20
22
22
24
24
26
28
30
32
36
60
65
75
85
100
110
125
145
160
180
210
240
270
295
355
410
470
525
650
d9 max.
No.
4
55
70
90
115
140
165
190
235
285
330
380
475
Thread
d2
M12
14
M16
18
M20
22
M24
26
M27
M30
30
33
12
16
20
3.70
4.83
5.75
8.59
10.6
14.3
16.5
25.6
36.1
49.1
65.3
105
Blind Flanges
DIN 2527 PN 25
Nominal Bore
Flange
D
10 up to 175
(175)
200
250
300
350
400
500
Screws
b
d9 max.
No.
Thread
d2
For Nominal Bore 10 up to 175 Blind Flanges of Nominal Pressure 16 are to be used.
330
28
280
165
12
M24
26
17.3
360
30
310
190
22.3
425
32
370
237
M27
30
33.5
485
34
430
285
16
46.3
555
38
490
332
M30
33
68.0
620
40
550
380
M33
36
89.7
730
45
660
475
20
138
17.6
22.7
34.2
47.3
69.3
91.5
141
241
Blind Flanges
DIN 2527 PN40
30.11.2007
10:31 Uhr
Seite 242
Blind Flanges
Blind Flanges
DIN 2527 PN64
Nominal Bore
Flange
D
10 up to 40
50
65
80
100
125
150
(175)
200
250
300
350
400
Screws
b
d3
d4
d9
No.
d2
For Nominal Bore 10 up to 40 Blind Flanges of Nominal Pressure 100 are to be used.
180
26
135
82
102
3
4
M20
22
205
26
160
98
122
45
3
8
M20
22
215
238
170
112
138
60
3
8
M20
22
250
30
200
138
162
80
3
8
M24
26
295
34
240
168
188
105
3
8
M27
30
345
36
280
202
218
130
3
8
M30
33
375
40
310
228
260
155
3
12
M30
33
415
42
345
256
285
180
3
12
M33
36
470
46
400
316
345
220
3
12
M33
36
530
52
460
372
410
270
4
16
M33
36
600
56
525
420
465
310
4
16
M36
39
670
60
585
475
535
360
4
16
M39
42
4.51
5.71
6.92
10.1
16.0
23.5
30.8
39.7
57.4
81.0
114
153
Blind Flanges
DIN 2527 PN 100
Nominal Bore
Flange
D
10
15
25
32
40
50
65
80
100
125
150
(175)
200
250
300
350
242
100
105
140
155
170
195
220
230
265
315
355
385
430
505
585
655
Screws
b
20
20
24
24
26
28
30
32
36
40
44
48
52
60
68
74
d3
d4
d9
70
75
100
110
125
145
170
180
210
250
290
320
360
430
500
560
32
34
52
62
70
90
108
120
150
180
210
245
278
340
400
460
40
45
68
78
88
102
122
138
162
188
218
260
285
345
410
465
45
60
80
105
130
155
180
210
260
300
2
2
2
2
3
3
3
3
3
3
3
3
3
3
4
4
No.
4
4
4
4
4
4
8
8
8
8
12
12
12
12
16
16
d2
M12
M12
M16
M20
M20
M24
M24
M24
M27
M30
M30
M30
M33
M36
M39
M45
14
14
18
22
22
26
26
26
30
33
33
33
36
39
42
48
1.00
1.22
2.65
3.24
4.09
5.84
8.03
9.43
14.3
22.6
31.8
41.3
56.1
89.6
119
175
30.11.2007
10:31 Uhr
Seite 243
Threaded Flange
NB
d1
Flange
Whitworth
ht
Neck
d3
Sealing Groove
d4
f
Screws
No. Thread d2
(7,85 kg/dm3)kg
Pipe Thread
DIN 2999
6
8
10
15
20
25
32
40
50
(60)
70
80
(90)
100
125
150
10
13.25
15.75
21.25
26.75
33.5
42.25
48.25
60
(66)
75.5
88.25
(101)
113.5
139
164.5
R1/8
R1/4
R3/8
R1/2
R3/4
R1
R1.1/4
R1.1/2
R2
R2.1/4
R2.1/2
R3
R3.1/2
R4
R5
R6
Weight per
Flange
65
70
75
80
90
100
120
130
140
150
160
190
200
210
240
265
10
10
12
12
14
14
14
14
14
14
14
16
16
16
18
18
40
45
50
55
65
75
90
100
110
120
130
150
160
170
200
225
18
18
20
20
24
24
26
26
28
30
32
34
36
38
40
44
18
22
25
30
40
50
60
70
80
90
100
110
120
130
160
185
25
30
35
40
50
60
70
80
90
100
110
128
138
148
178
202
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4*
8
8
11.5
11.5
11.5
11.5
11.5
11.5
15
15
15
15
15
18
18
18
18
18
0.190
0.227
0.323
0.373
0.590
0.743
1.05
1.20
1.37
1.57
1.92
2.85
3.04
3.19
4.47
5.80
Threaded Flange
DIN 2566 PN 10
NB
d1
Flange
Whitworth
ht
Neck
d3
Sealing Groove
d4
f
Screws
No.
Thread d2
(7,85 kg/dm3)kg
Pipe Thread
DIN 2999
6
8
10
15
20
25
32
40
50
65
80
100
10.2
13.5
17.2
21.3
26.9
33.7
42.4
48.3
60.3
76.1
88.9
114.3
R1/8
R1/4
R3/8
R1/2
R3/4
R1
R1.1/4
R1.1/2
R2
R2.1/2
R3
R4
Weight per
Flange
75
80
90
95
105
115
140
150
165
185
200
220
12
12
14
14
16
16
16
16
18
18
20
20
50
55
60
65
75
85
100
110
125
145
160
180
18
18
20
20
24
24
26
26
28
32
34
38
20
25
30
35
45
52
60
70
85
105
118
140
32
38
40
45
58
68
78
88
102
122
138
158
2
2
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
8
8
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
11
11
14
14
14
14
18
18
18
18
18
18
0.326
0.380
0.544
0.613
0.910
1.10
1.60
1.78
2.43
3.18
4.12
4.47
243
Threaded Flange
DIN 2565 PN06
30.11.2007
10:31 Uhr
Seite 244
Flanges
Types of Contact Faces
Face Flange
Form A
Form C
Simple Face
Form B
Form D
Form E
Face RZ = 16, machined
Form F
Form V 14
Form N
Form R 14
Form V 13
Form M
Form R 13
Form L
244
30.11.2007
10:31 Uhr
Seite 245
Flanges, groove and tongue, nominal pressure 10 to 160 design sizes, rings
Dimensions in mm
Tongue
Form F (normal case)
b = Thickness as per
dimension standard
Groove
Form N (normal case)
Form V 14
Form NA (special case)
Other dimensions and indications as Form N
Rz =
160
rotated
z
Rz =
160
rotated
z
Rz =
160
245
30.11.2007
10:31 Uhr
Seite 246
Flanges
Projection and Recess
Nominal Pressures 10 to 100
Dimensions in mm
Projection Flange
Form V 13
Recess Flange
Form R 13
Nominal
Bore
10
15
20
25
32
40
50
65
80
100
125
150
(175)
200
250
300
350
400
500
600
700
800
900
1000
Projection
d43
f1
Recess
d44
f2
-0.5
+0.5
+0.5
-0.5
34
39
50
57
65
75
87
109
120
149
175
203
233
259
312
363
421
473
575
675
777
882
987
1091
4
4
4
4
4
4
4
4
4
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5
5
5
5
5
5
5
6
35
40
51
58
66
76
88
110
121
150
176
204
234
260
313
364
422
474
576
676
778
883
988
1092
3
3
3
3
3
3
3
3
3
3.5
3.5
3.5
3.5
3.5
3.5
3.5
4
4
4
4
4
4
4
5
246
30.11.2007
10:31 Uhr
Seite 247
Dimensions in mm
This norm is valid in connection with the corresponding dimensional standards for flanges.
The lens ring face can be used also for plain flanges or flanges with sealing ring.
Recess
Form R
Projection
Form V
rotated
z
Rz =
160
247
30.11.2007
10:32 Uhr
Seite 248
Manufacturing Programme
Types of Valves
TYPES OF VALVE
GATE VALVE
GLOBE VALVES
SWING CHECK VALVES
PISTON CHECK VALVES
TILTING DISC CHECK VALVES
Y PATTERN GLOBE VALVES
GATE VALVES
GLOBE VALVES
SWING CHECK VALVES
PISTON CHECK VALVES
TILTING DISC CHECK VALVES
Y PATTERN GLOBE VALVES
API 6D VALVES
248
30.11.2007
10:32 Uhr
Seite 249
Valves
GATE VALVES Standard Cryogenic Bellow Seals
Type
Class
Sizes
Forged Steel
300
600
900
1500
Ends
RF RTJ BW
Type
Class
150
300
600
1/2 2
Ends
RF RTJ BW
Type
212
1500
Sizes
2500
Class
800
1500
Sizes
2500
1/4 2
Ends
NPT SW BW
Type
Class
2500
2 56 2 48 2 48 2 24 2 24
300
600
1500
2500
Sizes
1/4 2
Ends
NPT SW RF RTJ BW
Type
Class
Sizes
Forged Steel
300
600
900
2 16 2 16 2 12 2 10
Ends
RF RTJ BW
Type
Class
150
300
600
Sizes
1500
2500
2 8
28
1500
2500
1/2 2
Ends
RF RTJ BW
Type
Class
800
1500
2500
800
1500
2500
Sizes
1/4 2
1/4 2
Ends
NPT SW BW
NPT SW BW
4500
Type
Class
1500
2500
4500
Sizes
1/4 4
Ends
NPT SW BW RF RTJ
Type
Class
Sizes
Bolted Cover
150
300
300
600
1500
2500
1/2 2
Ends
Class
2500
212
Bolted Cover
150
Sizes
Type
1500
RF RTJ BW WAFER
Type
Class
900
2 48 2 36 2 36 2 24 2 24
Ends
Forged Steel
600
RE RTJ BW
Bolted Cover
800
1500
2500
1500
2500
Sizes
1/4 2
1/4 2
Ends
NPT SW BW
NPT SW BW
4500
249
Cast Steel
30.11.2007
10:32 Uhr
Seite 250
Valves
4500
2 3
4500
2 3
2500
2 12
4500
2 3
2500
212
2500
212
BALL VALVES FULL BORE & REDUCED BORE, CAST & FORGED STEEL
Split Body, BolClass 150 300 600
900
1500
2500
API
ted & Welded
Sizes
1/2 60
1/2 48 1/2 42 1/2 20 1/230
Construction
Ends
RF RTJ BW
1- Pce. Body
Class
800
1500
Side Entry
Sizes
1/4 4
1/4 4
Ends
RF RTJ BW
1- Pce. Body
Class 150 300 600
900
1500
2500
API
Top Entry
Sizes
1/2 60
1/2 42 1/2 40 1/2 20 1/230
Ends
RF RTJ BW
BUTTERFLY VALVES SOFT SEATED & METAL SEATED HIGH PERFORMANCE
Materials
Cast Iron, Carbon Steel, Stainless Steel, Aluminium,
Bronze & Alloys
Classes
ANSI 150 & ANSI 300
Sizes
1 1/232 Wafer Type, 1 1/216 Lug, 272 Flanged
PLUG VALVES
Lubricated
2-Way &
3-Way
Non Lubricated
2-Way &
3-Way
Class
Sizes
Ends
Class
Sizes
Ends
150
300
600 800/1500 900 1500 2500
1/230 1/2 24 1/224 1/42 116 216 212
RF RTJ BW
NPT SW-RTJ BW
150 & 300
150 & 300
1/2 12
1/2 2 1/2
RF BW
NPT SW
250
30.11.2007
10:33 Uhr
Seite 251
Valve Selection
PRESSURE
CLASS
END
CONNECTION
BODY
MATERIALS
TRIM
MATERIALS
OPERATION
Gate
Class 150
Flat Face
A 216-WCB
13%Cr
Handwheel
Globe
Class 300
Raised Face
A 216-WCC
304
Impact Handwheel
Swing Check
Class 600
Large Male
A 217-WC1
316
Chain
Piston Check
Class 900
Small Male
A 217-WC6
304-L
Bevel Gear
Tilting Disc
Class 1500
Large Female
A 217-WC9
316-L
Spur Gear
Globe Y Pattern
Class 2500
Small Female
A 217-C5
321
Pneumatic
Class 4500
Large Tongue
A 217-C12
347
Hydraulic
Small Tongue
A 217-C12A
51
Electric
Large Groove
A 352-LCB
55
Small Groove
A 352-LCC
Bronze
R.T.J.
A 352-LC2
Monel
Buttwelded Ends
A 352-LC3
Hastelloy B
Threaded End
A 351-CF8
Hastelloy C
A 351-CF8M
B-473
A 351-CF3
(Alloy 420)
A 351-CF3M
Half Stellite
A 351-CF8C
Stellite
A-351-CD4Mcu
A 890-5A
A 351-CN7M
Hastelloy B
Hastelloy C
Gate valve
Globe valve
251
VALVE TPYE
30.11.2007
10:33 Uhr
Seite 252
MANUFACTURING PROGRAM
Sizes are in inches
GATE VALVES
252
ANSI
Class
SIZE
From
150
2"
300
2"
72"
54"
600
900
1500
2500
2"
2"
2"
2"
54"
36"
24"
20"
To
GLOBE VALVES
ANSI
Class
SIZE
From
To
150
300
600
900
1500
2500
2"
2"
2"
2"
2"
2"
24"
24"
24"
20"
18"
16"
SIZE
Class
From
To
150
2"
64"
300
600
2"
2"
54"
54"
900
1500
2500
2"
2"
2"
36"
24"
20"
30.11.2007
10:33 Uhr
Seite 253
MANUFACTURING PROGRAM
Sizes are in inches
PISTON CHECK
VALVES
ANSI
Class
SIZE
From
150
2"
300
2"
10"
10"
600
900
1500
2"
2"
2"
10"
10"
10"
2500
2"
10"
To
TILTING DISC
CHECK VALVES
ANSI
Class
SIZE
From
To
150
300
600
900
1500
2500
2"
2"
2"
2"
2"
2"
24"
24"
24"
20"
18"
12"
Y-PATTERN
GLOBE VALVES
ANSI
SIZE
Class
From
To
150
300
600
2"
2"
2"
16"
16"
14"
900
1500
2"
2"
12"
12"
2500
2"
10"
253
30.11.2007
10:33 Uhr
Seite 254
Manufacturing Programme
Sizes are in inches
GATE VALVES
ANSI
SIZE
Class
From
To
600
2"
30"
900
2"
24"
1500
2"
24"
2500
2"
20"
4500
2"
8"
GLOBE VALVES
ANSI
SIZE
Class
From
To
600
2"
16"
900
2"
16"
1500
2"
16"
2500
2"
12"
4500
2"
6"
SIZE
Class
From
To
600
2"
30"
900
2"
24"
1500
2"
24"
2500
2"
20"
4500
2"
8"
Pressure Seal Swing Check Valve.
Class: 2500#. Size: 20"
254
30.11.2007
10:33 Uhr
Seite 255
Manufacturing Programme
Sizes are in inches
PISTON CHECK VALVES
ANSI
SIZE
Class
From
To
600
2"
16"
900
2"
16"
1500
2"
16"
2500
2"
12"
4500
2"
8"
SIZE
Class
From
To
600
2"
30"
900
2"
24"
1500
2"
24"
2500
2"
16"
4500
2"
SIZE
Class
From
To
600
2"
14"
900
2"
12"
1500
2"
12"
2500
2"
10"
255
30.11.2007
10:33 Uhr
Seite 256
Special Valves
ANSI
SIZE
Class
From
To
150
2"
48"
ANSI
SIZE
Class
From
To
150
2"
48"
300
2"
36"
Block & Bleed gate valve.
Class: 150#. Size: 28".
256
30.11.2007
10:33 Uhr
Seite 257
257
for use in critical applications in the chemical, petrochemical, oil and gas,
nuclear power,
cryogenic industries, etc.
30.11.2007
10:33 Uhr
Seite 258
CNC Machine
Centre.
258
30.11.2007
10:33 Uhr
Seite 259
Dye penetrating
inspection.
Vacuum test.
259
30.11.2007
10:33 Uhr
Seite 260
ANSI
SIZE
Class
From
To
125
2"
72"
150
2"
54"
300
2"
54"
600
2"
36"
900
2"
24"
1500
2"
20"
2500
2"
36"
260
SIZE
SIZE
Class
From
To
Class
From
To
150
2"
24"
150
2"
12"
300
2"
24"
300
2"
12"
600
2"
24"
600
2"
8"
900
2"
16"
900
2"
8"
30.11.2007
10:33 Uhr
Seite 261
Production range
Type
Gate, Globe/Stop/Needle, Piston/Ball/Swing-check,
Drop & Block check
(Urea Service)
Body joining
Bolted and Welded bonnet (seal or full penetration),
Bonnetless and
Pressure seal
Execution
Straight, Y pattern & Angle, Bellows Seals, Cryogenic
service, Vacuum
service, OS&Y, ISRS, ...
Motorized
with Electric, Pneumatic actuators, ...
Sizes
1/4" to 2" reduced and full bore (Urea service up to
8")
End connections
SW, Threaded, BW, Hub and Flanged (integral type)
Rating
ANSI class 150 to 4500 lbs
Materials
Carbon steel
ASTM A105
Killed Carbon steel
ASTM A350 / LF2
Alloy steel
ASTM A182 F5, F9, F11, F22, F91
Stainless steel
ASTM A182/F304(L), F316(L), F317, F321, F347,
F44
Special Alloy
Monel, Inconel, Incoloy, Hastelloy, UNS, Alloy 20,
Sanicro 28, Titanium, ...
Duplex
ASTM A 182/F51, F53, F55
261
30.11.2007
10:33 Uhr
Seite 262
ND
OUR TYPE
mm.
8
Gate Valves
type BSC 800 FB
* Button head up to
ND 25 size
262
BODY
TRIM
C mm.
MATERIAL
MATERIAL
60.3
6.5
A105
A182 GR F1
13% CR
13% Cr St
A182 GR F5
A182-F304
10
BSC 802 FB
60.3
15
20
BSC 803 FB
BSC 804 FB
89
105
12.7
19
A182 Gr F9
A182-F304 St
138 bar at
A182-F316
- 30 + 38c
25
BSC 805 FB
127
24
A182 Gr F12
A182-F316 St
40
BSC 807 FB
171.4
38
A182 Gr F22
A182-F321
A182 Gr F304
A182-F321 St
50
BSC 808 FB
184
50
A182 Gr F304L
Monel
A182 Gr F316
BBD 0801 FB
60.3
06.5
10
BBD 0802 FB
60.3
138 bar at
15
BBD 0803 FB
89
- 30 + 38c
20
BBD 0804 FB
25
800 Lbs
Inconel
M A182 Gr F316L
Titanium
A182Gr F321
Incoloy 825
A182 Gr F347
UNS N08904
12
A350 Gr LF2
UNS N08904 St
105
17.5
A350 Gr LF3
Hastelloy C
BBD 0805 FB
127
22
Monel
M A 182-F316L
40
BBD 0807 FB
171.4
32
Inconel
Titanium
Monel PTFE
50
BBD 0808 FB
184
44.4
Incoloy 825
Soft Seal
UNS N08904
Duplex 2205
15
CKB 803 FB
89
12
Duplex 2205
254 SMO
254 SMO
20
CKB 804 FB
105
17.5
25
CKB 805 FB
127
22
138 bar at
40
CKB 807 FB
171.4
32
- 30 + 38C
50
CKB 808 FB
184
44.4
6. 5
800 Lbs
138 bar at
-30 + 38C
CKP 801 FB
60.3
10
CKP 802 FB
60.3
15
CKP 803 FB
89
12
20
CKP 804 FB
105
17.5
25
CKP 805 FB
127
22
40
CKP 807 FB
171.4
32
50
CKP 808 FB
184
44.4
6.5
CKS 801 FB
60.3
15
CKS 802 FB
60.3
20
CKS 803 FB
89
12
138 bar at
25
CKS 804 FB
105
17.5
-30 + 38C
30
CKS 805 FB
127
22
40
CKS 807 FB
171.4
32
50
CKS 808 FB
184
44.4
800 Lbs
PORT DIAM.
A mm.
800 Lbs
800 Lbs
BSC 801 FB
END TO END
Note:
Bronze
St = Stellite
Ref.
32
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Part. Name
REGULATING NEEDLE
RING IN TWO HALVES
DISC NUT
YOKE RETAINING NUT
BODY
DISC
SEAT
STEM
GASKET
BONNET
STUD BOLTS
NUT
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GLAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e BSC 803 FB/18 means body for Gate Valve class 800 FB. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
Standard API 602 & BS 5352
30.11.2007
10:33 Uhr
Seite 263
CLASS
ND
OUR TYPE
mm.
800 Lbs
138 bar at
-30 + 38 C
800 Lbs
138 bar at
- 30 + 38 C
800 Lbs
Gate Valves
Type BSC 800 RB
138 bar at
- 30 + 38 C
800 Lbs
138 bar at
-30 + 38 C
15
20
25
40
50
15
20
25
40
50
15
20
25
40
50
15
20
25
40
50
Note:
BSC 803 RB
BSC 804 RB
BSC 805 RB
BSC 807 RB
BSC 808 RB
BBD 0803 RB
BBD 0804 RB
BBD 0805 RB
BBD 0807 RB
BBD 0808 RB
CKP 803 RB
CKP 804 RB
CKP 805 RB
CKP 807 RB
CKP 808 RB
CKS 803 RB
CKS 804 RB
CKS 805 RB
CKS 807 RB
CKS 808 RB
C mm.
70
89
105
140
171.4
11
12.7
19
30
38
70
89
105
140
171.4
70
89
105
140
171.4
70
89
105
140
171.4
7
12
17.5
29
32
7
12
17.5
29
32
7
12
17.5
29
32
BODY
TRIM
MATERIAL
MATERIAL
105
A182 GR F1
13% CR
13% Cr St
A182 GR F5
A182-F304
A182 Gr F9
A182-F304 St
A182-F316
A182 Gr F12
A182-F316 St
A182 Gr F22
A182-F321
A182 Gr F304
A182-F321 St
A182 Gr F304L
Monel
A182 Gr F316
Inconel
M A182 Gr F316L
Titanium
A182Gr F321
Incoloy 825
A182 Gr F347
UNS N08904
A350 Gr LF2
UNS N08904
A350 Gr LF3
St
Monel
Inconel
M A 182-F316L
Titanium
Incoloy 825
Monel PTFE
UNS N08904
Soft Seal
Duplex 2205
Duplex 2205
254 SMO
254 SMO
Hastelloy C
Bronze
St = Stellite
Ref.
32
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Part. Name
REGULATING NEEDLE
RING IN TWO HALVES
DISC NUT
YOKE RETAINING NUT
BODY
DISC
SEAT
STEM
GASKET
BONNET
STUD BOLTS
NUT
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e BSC 803 RB/18 means body for Gate Valve BSC 800 RB. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
STANDARD API 602 & BS 5352
263
30.11.2007
10:33 Uhr
Seite 264
ND
OUR TYPE
mm.
800 Lbs
138 bar at
- 30 + 38 C
800 Lbs
Gate Valves
type WSC 800 RB
138 bar at
or WSC 800 FB
- 30 + 38 C
800 Lbs
138 bar at
- 30 + 38 C
800 Lbs
138 bar at
Globe & Needle Valves
type WBD 0800 RB
-30 + 38 C
or WBD 0800 FB
Button head up to
ND 25 size
800 Lbs
138 bar at
-30 + 38 C
800 Lbs
138 bar at
- 30 + 38 C
264
Note:
15
20
25
40
50
8
10
15
20
25
40
50
WSC 803 RB
WSC 804 RB
WSC 805 RB
WSC 807 RB
WSC 808 RB
WSC 801 FB
WSC 802 FB
WSC 803 FB
WSC 804 FB
WSC 805 FB
WSC 807 FB
WSC 808 FB
C mm.
70
89
105
140
171.4
11
12.7
19
30
38
60.3
60.3
89
105
127
171.4
184
6.5
8
12.7
19
24
38
50
15
20
25
40
50
WBD 0803 RB
WBD 0804 RB
WBD 0805 RB
WBD 0807 RB
WBD 0808 RB
70
89
105
140
171.4
7
12
17.5
29
32
8
10
15
20
25
40
50
WBD 0801 FB
WBD 0802 FB
WBD 0803 FB
WBD 0804 FB
WBS 0805 FB
WBD 0807 FB
WBD 0808 FB
60.3
60.3
89
105
127
171.4
184
6.5
7
12
17.5
22
32
44.4
15
20
25
40
50
WCKP 803 RB
WCKP 804 RB
WCKP 805 RB
WCKP 807 RB
WCKP 808 RB
70
89
105
140
172
7
12
17.5
29
32
15
20
25
40
50
WCKP 803 FB
WCKP 804 FB
WCKP 805 FB
WCKP 807 FB
WCKP 808 FB
89
105
127
172
184
12
17.5
22
32
44
BODY
TRIM
MATERIAL
MATERIAL
A105
A182 GR F1
13% Cr St
A182 GR F5
A182-F304
A182 Gr F9
A182-F304 St
A182-F316
A182 Gr F12
A182-F316 St
A182 Gr F22
A182-F321
A182 Gr
Monel
F304L
L
A182 Gr F316
M A182 Gr F316L
N
A182Gr F321
A182 Gr F347
13% CR
Inconel
Titanium
Incoloy 825
UNS N08904
UNS N08904
A350 Gr LF2
A350 Gr LF3
Monel
Inconel
M A 182-F316L
Titanium
Incoloy 825
Monel PTFE
UNS N08904
Soft Seal
Duplex 2205
Duplex 2205
254 SMO
254 SMO
St
X
Hastelloy C
Bronze
REGULATING NEEDLE
21
20
DISC NUT
19
18
BODY
17
DISC
16
SEAT
15
STEM
13
BONNET
10
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e WSC 803 RB/18 means body for Gate Valve WSC 800 RB. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
STANDARD API 602 & BS 5352
30.11.2007
10:33 Uhr
Seite 265
CLASS
ND
OUR TYPE
mm.
800 Lbs
138 bar at
-30 + 38 C
800 Lbs
138 bar at
- 30 + 38 C
800 Lbs
255 bar at
- 30 + 38 C
C mm.
15
20
25
40
WSC 6063
WSC 6064
WSC 6065
WSC 6067
142
161.5
182.5
214
11
12.7
19
30
15
20
25
40
WSC 6063 R
WSC 6064 R
WSC 6065 R
WSC 6067 R
207
218.5
243.5
263
11
12.7
19
30
15
20
25
40
WSC 15063
WSC 15064
WSC 15065
WSC 15067
156
180
198.5
236
Gate Valves
Type WSC 1506
11
12.7
19
30
BODY
TRIM
MATERIAL
MATERIAL
A 105
A182 GR F1
13% CR
13% Cr St
A182 GR F5
A182-F304
A182 Gr F9
A182-F304 St
A182-F316
A182 Gr F12
A182-F316 St
A182 Gr F22
A182-F321
A182 Gr F304
A182-F321 St
A182 Gr F304L
Monel
A182 Gr F316
Inconel
M A182 Gr F316L
Titanium
A182Gr F321
Incoloy 825
A182 Gr F347
UNS N08904
A350 Gr LF2
UNS N08904
A350 Gr LF3
Monel
Inconel
M A 182-F316L
Titanium
Incoloy 825
Monel PTFE
UNS N08904
Soft Seal
Duplex 2205
Duplex 2205
254 SMO
254 SMO
St
Hastelloy C
Bronze
Gate Valves
type WSC 606 I
Gate Valves
Reinforced
type WSC 606 R
Note:
BODY EXTENSION
18
BODY
17
DISC
16
SEAT
15
STEM
13
BONNET
10
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GLAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e WSC 6063/18 means body for Gate Valves Extended Body API 606. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
STANDARD API 602 & BS 5352
265
30.11.2007
10:33 Uhr
Seite 266
ND
OUR TYPE
mm.
1500 Lbs
BB-O.S.&Y.
255 bar at
- 30 + 38 C
1500 Lbs
Gate Valves
type BSC 1500
BB-O.S.&Y.
255 bar at
- 30 + 38 C
15
20
25
40
50
15
20
25
40
50
BSC 1503
BSC 1504
BSC 1505
BSC 1507
BSC 1508
BBD 01503
BBD 01504
BBD 01505
BBD 01507
BBD 01508
END TO END
PORT DIAM.
BODY
TRIM
A mm.
C mm.
MATERIAL
MATERIAL
92
114.3
127
171.4
228.6
11
13. 5
19
30
38
92
114.3
127
171.4
228.6
12
14. 3
19
28
40
or Globe Valves
type BBD 01500
1500 Lbs
WB-O.S.&Y.
255 bar at
- 30 + 38 C
1500 Lbs
WB-O.S.&Y.
255 bar at
-30 + 38 C
1500 Lbs
Globe Valves
type WBD 01500
* Button head up to
ND 20 size
Gate Valves
type WSC 1500
BB-O.S.&Y.
255 bar at
-30 + 38C
1500 Lbs
BB-O.S.&Y.
138 bar at
- 30 + 38 C
1500 Lbs
BB-O.S.&Y.
138 bar at
- 30 + 38 C
266
15
20
25
40
50
WSC 01503
WSC 01504
WSC 01505
WSC 01507
WSC 01508
89
105
127
171,4
184
11
13. 5
19
30
38
15
20
25
40
50
WBD 01503
WBD 01504
WBS 01505
WBD 01507
WBD 01508
89
105
127
171.4
184
12
14. 3
19
28
40
15
20
25
40
50
15
20
25
40
50
15
20
25
40
50
CKP 1503
CKP 1504
CKP 1505
CKP 1507
CKP 1508
CKS 1503
CKS 1504
CKS 1505
CKS 1507
CKS 1508
CKS 1503
CKS 1504
CKS 1505
CKS 1507
CKS 1508
92
114
127
172
229
92
114
127
172
229
92
114
127
172
229
12
17. 5
22
32
44.4
12
17. 5
22
32
44.4
12
17. 5
22
32
44.4
A105
A182 GR F1
13% CR
13% Cr St
A182 GR F5
A182-F304
A182 Gr F9
A182-F304 St
A182-F316
A182 Gr F12
A182-F316 St
A182 Gr F22
A182-F321
A182 Gr F304
A182-F321 St
A182 Gr F304L
Monel
A182 Gr F316
Inconel
M A182 Gr F316L
Titanium
A182 Gr F321
Incoloy 825
A182 Gr F347
UNS N08904
A350 Gr LF2
UNS N08904
A350 Gr LF3
Monel
Inconel
M A 182-F316L
Titanium
Incoloy 825
Monel PTFE
UNS N08904
Soft Seal
Duplex 2205
Duplex 2205
254 SMO
254 SMO
St
Hastelloy C
Bronze
St = Stellite
REGULATING NEEDLE
21
20
DISC NUT
19
18
BODY
17
DISC
16
SEAT
15
STEM
13
BONNET
10
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
Note:For reference to items number add to the base drawing number a stroke then item no.
i.e BSC 1503/18 means body for Gate Valve screwed or socket weld ends. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
BRITISH STANDARD 5352
30.11.2007
10:33 Uhr
Seite 267
CLASS
ND
OUR TYPE
mm.
150 Lbs
19.5 bar at
-30 + 38 C
300 Lbs
51 bar at
-30 + 38 C
Gate Valves
type SCF 600
600 Lbs
or SCF 300
or SCF 150
102 bar at
-30 + 38 C
150 Lbs
19.5 bar at
- 30 + 38 C
300 Lbs
51 bar at
-30 + 38 C
600 Lbs
102 bar at
-30 + 38 C
300 Lbs
51 bar at
- 30 + 38 C
600 Lbs
102 bar at
- 30 + 38 C
Note:
END TO END
PORT DIAM.
BODY
TRIM
A mm.
C mm.
MATERIAL
MATERIAL
15
20
25
40
50
SCF 153
SCF 154
SCF 155
SCF 157
SCF 158
108
118
127
165
178
11
12.7
19
30
38
15
25
40
50
SCF 303
SCF 305
SCF 307
SCF 308
140
165
190.5
216
12.7
24
38
50
15
20
25
40
50
SCF 603
SCF 604
SCF 605
SCF 607
SCF 608
165
190.5
216
241
292
12.7
19
24
38
50
15
20
25
40
50
DF 0153
DF 0154
DF 0155
DF 0157
DF 0158
108
117.5
127
165
203
7
12
17.7
29
32
15
20
25
40
50
DF 0303
DF 0304
DF 0305
DF 0307
DF 0308
152.4
177.8
203.2
228.6
266.7
12
17.5
22
29
40
15
20
25
40
50
DF 0603
DF 0604
DF 0605
DF 0607
DF 0608
165
190.5
216
241
292
12
17.5
22
29
40
15
20
25
40
50
CKBF 303
CKBF 304
CKBF 305
CKBF 307
CKBF 308
165
190.5
216
241
266.7
12
17.5
22
32
44.4
15
20
25
40
50
CKBF 603
CKBF 604
CKBF 605
CKBF 607
CKBF 608
165.1
190.5
216
241
292
12
17.5
22
32
44.4
A105
A182 GR F1
13% CR
13% Cr St
A182 GR F5
A182-F304
A182 Gr F9
A182-F304 St
A182-F316
A182 Gr F12
A182-F316 St
A182 Gr F22
A182-F321
A182 Gr F304
A182-F321 St
A182 Gr F304L
Monel
A182 Gr F316
Inconel
M A182 Gr F316L
Titanium
A182 Gr F321
Incoloy 825
A182 Gr F347
UNS N08904
A350 Gr LF2
UNS N08904
A350 Gr LF3
Monel
Inconel
M A 182-F316L
Titanium
Incoloy 825
Monel PTFE
UNS N08904
Soft Seal
Duplex 2205
Duplex 2205
254 SMO
254 SMO
St
Hastelloy C
Bronze
St = Stellite
Ref.
32
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Part. Name
REGULATING NEEDLE
RING IN TWO HALVES
DISC NUT
YOKE RETAINING NUT
BODY
DISC
SEAT
STEM
GASKET
BONNET
STUD BOLTS
NUT
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e SCF 153/18 means body for Gate Valves flanged ANSI 150. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
STANDARD API 602 & BS 5352
267
30.11.2007
10:33 Uhr
Seite 268
ND
OUR TYPE
mm.
1500 Lbs
END TO END
PORT DIAM.
BODY
A mm.
C mm.
MATERIAL
15
SCF 1503
216
12.7
A105
20
SCF 1504
228.6
19
A182 GR F1
255 bar at
25
SCF 1505
254
24
A182 GR F5
-30 + 38 C
40
SCF 1507
305
38
A182 Gr F9
1500 Lbs
A182 Gr F12
A182 Gr F22
A182 Gr F304
15
WSCF 1503
216
12.7
20
WSCF 1504
228.6
19
A182 Gr F304L
255 bar at
25
WSCF 1505
254
24
A182 Gr F316
- 30 + 38 C
40
WSCF 1507
305
38
M A182 Gr F316L
Gate Valves
type SCF 1500
N
O
A182 Gr F347
or WSCF 1500
A350 Gr LF2
1500 Lbs
15
DF 01503
216
12
A350 Gr LF3
20
DF 01504
228.6
17.5
Monel
255 bar at
25
DF 01505
254
22
Inconel
- 30 + 38 C
40
DF 01507
305
29
Titanium
Incoloy 825
UNS N08904
1500 Lbs
15
WDF 01503
216
12
17.5
20
WDF 01504
228.6
255 bar at
25
WDF 01505
254
22
-30 + 38 C
40
WDF 01507
305
29
Duplex 2205
254 SMO
1500 Lbs
Globe Valves
type WDF 01500
or DF 01500
* Button head up to
ND 20 size
15
CKPF 1503
216
12
20
DISC NUT
YOKE RETAINING NUT
20
CKPF 1504
229
17.5
19
25
CKPF 1505
254
22
18
BODY
-30 + 38C
40
CKPF 1507
305
29
17
DISC
16
SEAT
15
CKSF 1503
216
12
20
CKSF 1504
229
17.5
255 bar at
25
CKSF 1505
254
22
- 30 + 38 C
40
CKSF 1507
305
29
1500 Lbs
255 bar at
- 30 + 38 C
268
REGULATING NEEDLE
21
255 bar at
1500 Lbs
A182 Gr F321
Note:
15
CKBF 1503
216
15
STEM
13
BONNET
10
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
12
GRAND FLANGE
NUT
YOKE NUT
20
CKBF 1504
228.6
17.5
25
CKBF 1505
254
22
32
BOLT
HANDWHEEL
40
CKBF 1507
305
For reference to item numbers add to the base drawing number a stroke then item no.
i.e SCF 1503/18 means body for Gate Valve flanged RF. Size 15 mm.
RATING FOR CARBON STEEL TO ANSI B 16.34 EDITION 1977
BRITISH STANDARD BS 5352
30.11.2007
10:34 Uhr
Seite 269
CLASS
ND
OUR TYPE
mm.
800 Lbs
99 bar at
cold non shock
- 196 C
800 Lbs
99 bar at
cold non shock
- 196 C
1500 Lbs
248 bar at
- 196 C
1500 Lbs
248 bar at
- 196 C
15
20
25
40
50
BSC 803 BT
BSC 804 BT
BSC 805 BT
BSC 807 BT
BSC 808 BT
15
20
25
40
50
BBD 0803 BT
BBD 0804 BT
BBD 0805 BT
BBD 0807 BT
BBD 0808 BT
PORT DIAM.
BODY
TRIM
A mm.
C mm.
MATERIAL
MATERIAL
89
105
127
172
184
12.7
19
24
38
50
89
105
127
172
184
12
17.5
22
29
40
15
20
25
40
50
BSC 1503 BT
BSC 1504 BT
BSC 1505 BT
BSC 1507 BT
BSC 1508 BT
92
114
127
172
228.6
12.7
19
24
38
50
15
20
25
40
50
BBD 01503 BT
BBD 01504 BT
BBD 01505 BT
BBD 01507 BT
BBD 01508 BT
92
114
127
172
228.6
12
17.5
22
29
40
Note:
END TO END
A182 GR F304L
A182-F304
A182-F304 St
A182 GR F316
A182-F316
M A182 Gr F316L
A182-F316 St
A182 Gr F321
A182-F321
A182 Gr F347
A182-F321 St
Monel
Monel
Inconel
Inconel
Titanium
Titanium
Incoloy 825
Incoloy 825
Duplex 2205
Hastelloy C
M A182-F316L
C
Bronze
Monel PTFE
Soft Seal
St = Stellite
Ref.
32
29
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Part. Name
REGULATING NEEDLE
EXTENSION PIPE
YOKE RETAINING NUT
BODY
DISC
SEAT
STEM
GASKET
BONNET
STUD BOLTS
NUT
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e BSC 803 BT/18 means body for Gate Valve 800 Lbs. Size 15 mm.
British standard 5352
269
10.12.2007
11:31 Uhr
Seite 270
ND
OUR TYPE
mm.
300 Lbs
49.6 bar at
- 196 C
600 Lbs
99 bar at
- 196 C
300 Lbs
49 bar at
- 196 C
600 Lbs
99 bar at
- 196 C
15
20
25
40
50
15
20
25
40
50
SCF 303 BT
SCF 304 BT
SCF 305 BT
SCF 307 BT
SCF 308 BT
SCF 603 BT
SCF 604 BT
SCF 605 BT
SCF 607 BT
SCF 608 BT
BODY
TRIM
C mm.
MATERIAL
MATERIAL
140
152.4
165
191
216
12.7
19
24
38
50
165
190.5
216
241
292
12.7
19
24
38
50
DF 0303 BT
DF 0304 BT
DF 0305 BT
DF 0307 BT
DF 0308 BT
152
178
203
229
267
12
17.5
22
29
40
15
20
25
40
50
DF 0603 BT
DF 0604 BT
DF 0605 BT
DF 0607 BT
DF 0608 BT
165
190.5
216
241
292
12
17.5
22
29
40
or DF 0600 BT
* Button head up to
ND 25 size
270
PORT DIAM.
A mm.
15
20
25
40
50
Note:
END TO END
A182 GR F304L
A182-F304
A182-F304 St
A182 GR F316
A182-F316
M A182 Gr F316L
A182-F316 St
A182 Gr F321
A182-F321
A182 Gr F347
A182-F321 St
Monel
Monel
Inconel
Inconel
Titanium
Titanium
Incoloy 825
Incoloy 825
Duplex 2205
Hastelloy C
M A182-F316L
C
Bronze
Monel PTFE
Soft Seal
St = Stellite
Ref.
32
29
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Part. Name
REGULATING NEEDLE
EXTENSION PIPE
YOKE RETAINING NUT
BODY
DISC
SEAT
STEM
GASKET
BONNET
STUD BOLTS
NUT
PACKING
EYEBOLTS UNIT
PACKING GLAND
EYEBOLTS
GRAND FLANGE
NUT
YOKE NUT
NAME PLATE
BOLT
HANDWHEEL
For reference to items number add to the base drawing number a stroke then item no.
i.e SCF 603 BT/18 means body for Gate Valve 600 Lbs. Size 15 mm.
British standard 5352
30.11.2007
10:34 Uhr
Seite 271
271
30.11.2007
10:34 Uhr
Seite 272
Grade
Designation
Colour Code
Yield Strength
psi
N/mm2
Heat Treatment
min
5CT Group 1
Tubing & Casing
API-connnection
Optiflow
Multiseal
Techniseal
5 CT Group 2
Tubing & Casing
API-connnection
Optiflow
Multiseal
Techniseal
Grade J55
Green
Grade K55
Green/Green
Grade N80
Red
Blue
Blue
Blue
Grade C75 9 Cr
Blue/Yellow
Yellow
Grade C75 13 Cr
Blue/Yellow
Grade L 80
Type 1
Red/Brown
Red
Grade L80SS
Red/Brown
Red
Red/Brown/
Yellow/Yellow
Red/Brown/Yello
Quenched and Tempered
w
Grade L80 9 Cr
Grade L80 13 Cr
5 CT Group 3
Tubing & Casing
API-connnection
Optiflow
Multiseal
Techniseal
TPS
Tubing & Casing
272
Purple
55000
380
80000
550
75000
520
55000
380
80000
550
95000
655
80000
550
110000
760
100000
690
75000
515
90000
620
75000
515
90000
620
80000
550
95000
655
80000
550
95000
655
90000
620
105000
725
95000
655
110000
760
95000
655
110000
760
Purple
Grade C95
Brown
Grade C95SS
Brown
Grade C95 9 Cr
Brown/Yellow
max
Tensile
Strength
psi
N/mm2
min
95000
655
95000
655
95000
655
95000
655
100000
690
105000
725
115000
725
Grade C95 13 Cr
Brown/Yellow
Silver
Silver
95000
655
110000
760
Grade P105
White
10500
725
135000
930
120000
830
White
110000
760
140000
965
125000
860
Solution Annealed:
if required cold reworked
Grade P110
TPS
Techniduplex TD 2205
105000
725
as per
agreement
10:34 Uhr
Seite 273
Characteristics and
Recommendation
Chemical Analysis
C
Si
max.
Mn
P
max.
S
max.
Cr
Others
---
---
---
---
0,030
0,030
---
---
---
Casing
for general service
---
---
---
0,030
0,030
---
---
---
---
---
---
0,030
0,030
---
---
0,50
max.
0,45
1,90
max.
0,030
0,030
0,43
max.
0,45
1,50
max.
0,030
0,030
---
---
0,380,48
---
0,75 1,00
0,030
0,030
0,80 1,10
---
0,15
max
1,00
0,30 0,60
0,020
0,010
8,00 10.00
Mo 0,90 - 1,10
Ni max. 0,50
Cu max. 0,25
0,15 0,22
1,00
0,25 1,00
0,020
0,010
0,43
max
0,45
1,90
max.
0,030
0,030
---
Ni max. 0,25
Cu max. 0,35
0,15 0,35
0,35
1,20
max.
0,020
0,010
0,80 1,60
Mo max. 1,10
Ni max. 0,20
0,15
max
1,00
0,30 0,60
0,020
0,010
8,00 10,00
Mo 0,90 - 1,10
Ni max. 0,50
Cu max. 0,25
0,15 0,22
1,00
0,251,00
0,020
0,010
0,35
max.
---
1,00
max.
0,020
0,010
1,20
max.
Mo max. 0,75
Ni max. 0,99
0,50
max.
---
1,90
max.
0,030
0,010
---
Ni max. 0,99
---
0,45
max.
0,45
1,90
max.
0,030
0,030
---
25,4
255
0,15 0,35
0,35
1,20
max.
0,020
0,010
0,80 1,60
Mo max. 1,10
Ni max. 0,20
0,15
max.
1,00
0,30 0,60
0,020
0,010
---
8,00 10,00
Mo 0,90 - 1,10
Ni max. 0,50
Co max. 0,25
0,15 0,22
1,00
0,25 1,00
0,020
0,010
0,35
max.
---
1,20
max.
0,020
0,010
0,40 1,50
Mo 0,25 - 0,85
Ni max. 0,99
0,50
max.
-----
1,90
max.
0,030
0,100
---
Ni max. 0,99
---
22
237
23
241
23
241
25,4
255
Mo 0,15 - 0,40
Cr + Ni + Cu max. 0,50
25,4
255
---
---
---
---
0,030
0,030
---
---
---
---
---
---
0,030
0,030
---
---
as per agreement
0,03
max.
1,00
2,00
max.
0,030
0,020
Mo 2,50 - 3,50
21,00 Ni 4,50 - 6,50
23,00
N 0,08 - 0,20
273
Hardness
HRC
BHN
max.
30.11.2007
30.11.2007
10:34 Uhr
Seite 274
IIntegral Joint
TPS MULTISEAL Flush Joint
Integral Joint
TPS MULISEAL TS 4 TR
Integral Joint
TPS MULTISEAL TS 6 TR
Integral Joint
TPS MULTISEAL TS 8 TR
Inetgral Joint
TPS-MULTISEAL TS4
Integral Joint
TPS MULTISEAL TS6
Integral Joint
TPS MULTISEAL TS8
TPS-PREMIUM GASTIGHT
Integral Joint
Tubing
TPS-OPTIFLOW
API-Stamdard
Size
inch
mm
1.050
26,67
1.315
33,40
1.660
42,16
1.900
48,26
2.063
52,40
2 3/8
60,33
2 7/8
73,03
3 1/2
88,90
4
101,60
4 1/2
114,30
5
127,00
5 1/2
139,70
6 5/8
168,28
7
177,80
7 5/8
193,68
8 5/8
219,08
9 5/8
244,48
10 3/4
273,05
11 3/4
298,45
13 3/8
339,73
For Special-Connectors and for Thread Service please ask us for your nearest TPS Licensce. For general information only.
274
30.11.2007
10:35 Uhr
Seite 275
Weight Conversions
from steel to other materials
GRADE
FACTOR
Aluminium
0,3462
Aluminium
2011
0,3604
Aluminium
2014
0,3568
Aluminium
2017
0,3568
Aluminium
2024
0,3533
Aluminium
3003
0,3498
Aluminium
5052
0,3427
Aluminium
5083
0,3392
Aluminium
6061
0,3462
Aluminium
6063
0,3462
Aluminium
7075
0,3568
Brass
1,0840
Bronze
1,1180
Columbium
1,1070
Copper
1,1480
Copper Alloys
1,1200
Gold
2,4590
Magnesium
0,2230
Molybdenum
1,3210
Niobium
1,1070
Tantalum
2,1420
Titanium
0,5750
1,1200
1,0400
Tungsten
2,4640
Zinc
0,9040
Zirconium
0,8350
MATERIAL
______________________
______________________
______________________
______________________
275
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 276
Weight Conversions
from steel to other materials
GRADE
MATERIAL
DENSITY
FACTOR
1.3912
1.3917
1.3981
1.4314
1.4324
1.4361
1.4438
1.4462
1.4465
1.4529
S32550
1.4534
1.4539
1.4542
1.4544
1.4545
1.4546
1.4548
1.4549
1.4563
1.4546
1.4574
1.4575
1.4828
1.4841
1.4845
1.4864
1.4865
1.4876
1.4939
1.4943
1.4944
1.4957
1.4971
1.4974
1.4980
1.6354
1.6355
1.6356
1.6358
1.6359
1.6604
1.6944
1.7214
1.7220
1.7734
1.7736
G43400
K44200
S45000
S45500
Alloy 36
Alloy 42
Alloy K
Alloy 304
Alloy 301
Alloy 1815
Alloy 317 L
Alloy 2205
Alloy 25252
Alloy 254
Alloy 255
PH 13-8 Mo
Alloy 904L
17-4 PH
Alloy 321
15-5 PH
Alloy 347
17-4 PH
G-17-4 PH
Alloy 28
17-7 PH
PH 15-7 Mo
Alloy 2842
Alloy 309
Allloy 310
Alloy 310 S
Alloy DS
Alloy 330 G
Alloy 800 H/HAT
Jethete
A-286
A-286
G N-155
N-155
N-155
A-286
MA 300
MA 350
MA 350
MA 300
MA 250
30NCD16
4340
4130
4135
15CDV6
E-15CDV6
Alloy 4340
Alloy 300M
Alloy 450
Alloy 450
8.20
8.20
8.30
7.90
7.90
7.85
7.85
7.80
7.96
8.30
7.90
7.80
8.05
7.80
7.90
7.80
7.90
7.90
7.90
8.10
7.80
7.80
7.70
7.90
7.90
7.90
8.00
8.00
8.00
7.80
7.95
7.95
8.25
8.25
8.25
7.95
8.05
8.02
8.02
8.08
8.05
7.85
7.85
7.85
7.85
7.85
7.85
7.80
7.80
7.80
7.80
1.0446
1.0446
1.0572
1.0061
1.0061
1.0000
1.0000
0.9935
1.0138
1.0572
1.0061
0.9935
1.0255
0.9935
1.0061
0.9935
1.0061
1.0061
1.0061
1.0316
0.9935
0.9935
0.9809
1.0061
1.0061
1.0061
1.0191
1.0191
1.0191
0.9935
1.0126
1.0126
1.0507
1.0507
1.0507
1.0126
1.0255
1.0255
1.0255
1.0292
1.0255
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
0.9742
0.9742
0.9742
0.9742
276
30.11.2007
10:35 Uhr
Seite 277
Weight Conversions
from steel to other materials
______________________
______________________
______________________
______________________
Nickel Alloy
MATERIAL
DENSITY
FACTOR
2.4053
2.4060
2.4061
2.4066
2.4068
2.4360
2.4361
2.4375
2.4602
2.4605
2.4608
2.4610
2.4617
2.4618
2.4619
2.4630
2.4631
2.4632
2.4634
2.4636
2.4642
2.4646
2.4650
2.4654
2.4660
2.4662
2.4663
2.4665
2.4668
2.4669
2.4670
2.4671
2.4674
2.4676
2.4816
2.4819
2.4851
2.4856
2.4858
2.4869
2.4951
2.4952
2.4969
2.4973
2.4975
2.4976
2.4983
N06230
N08330
Nickel 222
Nickel 205
Nickel 205
Nickel 200
Nickel 201
Alloy 400
LC-Alloy 400
Alloy K-500
Alloy C 22
Alloy 59
Alloy 333
Alloy C 4
Alloy B 2
Alloy G
Alloy G-3
Alloy 75
Alloy 80A
Alloy 90
Alloy 105
Alloy 115
Alloy 690
Alloy 214
Alloy C-263
Waspaloy
Alloy 20CB3
Alloy 901
Alloy 617
Alloy X
Alloy 718
Alloy X-750
Alloy 713 LC
Alloy 713
Alloy 100
Alloy M 246
Alloy 600
Alloy C-276
Alloy 601
Alloy 625
Alloy 825
Alloy 80/20
Alloy 75
Alloy 80A
Alloy 90
Alloy 41
Alloy 901
Alloy NiCr20MO
Alloy Co500
Alloy 230
Alloy 330
8.89
8.89
8.89
8.89
8.89
8.83
8.83
8.46
8.69
8.80
8.56
8.64
9.22
8.30
8.30
8.40
8.20
8.20
8.00
8.00
8.14
8.05
8.36
8.25
8.10
8.15
8.55
8.50
8.19
8.25
8.01
8.01
7.75
8.50
8.42
8.89
8.20
8.44
8.18
8.30
8.37
8.19
8.18
8.20
8.20
8.20
8.10
8.83
8.10
1.1321
1.1321
1.1321
1.1321
1.1321
1.1249
1.1249
1.0775
1.1071
1.1208
1.0904
1.1006
1.1744
1.0572
1.0572
1.0697
1.0446
1.0446
1.0191
1.0191
1.0369
1.0255
1.0649
1.0507
1.0316
1.0381
1.0892
1.0827
1.0430
1.0507
1.0203
1.0203
0.9870
1.0827
1.0726
1.1322
1.0446
1.0750
1.0418
1.0572
1.0661
1.0430
1.0418
1.0446
1.0446
1.0446
1.0316
1.1249
1.0316
GRADE
277
30.11.2007
10:35 Uhr
______________________
______________________
______________________
______________________
Seite 278
Conversion Table
PVC Schedule 40/80
Scope:
This specification sheet covers the manufacturers requirements for PVC Schedule 40 and 80 IPS pressure pipe. This pipe meets
or exceeds the industry standards set forth by the American Society for Testing and Materials and NSF Interantional, Standards
14/61.
PVC Materials:
Rigid PVC (polyvinyl chloride) used in the extrusion of Schedule 40 and 80 pipe is of Type I, Grade 1 compound as stated in ASTM
D-1784. Raw material used in extrusion shall contain the specified amounts of color pigment, stabilizers, and other additives
approved by NSF International.
Dimensions:
Physical dimensions and tolerances of PVC Schedule 40 and 80 pipe meet the requirements of ASTM standard specification D1785. Socket dimensions of belled end pipe meet the requirements of ASTM D-2672 or F-280.
Sizes:
Diameter
O.D.
(inches)
(inches)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
6
8
10
12
14
16
18
20
24
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.500
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000
Wall
Thickness
.109
.113
.133
.141
.145
.154
.203
.216
.237
.280
.322
.365
.406
.438
.500
.562
.593
.687
Schedule 40
PVC
I.D.
.602
.804
1.029
1.360
1.590
2.047
2.445
3.042
3.998
6.031
7.941
9.976
11.888
13.072
14.936
16.809
18.743
22.544
Pressure
73F
(psi)
Wall
Thickness
600
480
450
370
330
280
300
260
220
180
160
140
130
130
130
130
120
120
.147
.154
.179
.191
.200
.218
.276
.300
.337
.432
.500
.593
.687
.750
.843
.937
1.031
1.218
Schedule 80
PVC
I.D.
.526
.722
.936
1.255
1.476
1.913
2.290
2.864
3.786
5.709
7.565
9.493
11.294
12.412
14.224
16.014
17.814
21.418
Pressure
73F
(psi)
850
690
630
520
470
400
420
370
320
280
250
230
230
220
220
220
220
210
Marking:
PVC Schedule 40 and 80 pipe is marked as prescribed in ASTM D-1785 to indicate the manufacturers name or trademark, material designation code, the nominal pipe size, the Schedule size with the pressure rating in PSI for water at 73F, the ASTM designation number D-1785 and the NSF seal for potable water.
Sample Specification:
All PVC Schedule 40 and 80 pipe shall conform to ASTM D-1785. Schedule 40 fittings shall conform to ASTM D-2466, Schedule 80
socket fittings shall conform to ASTM D-2467 and ASTM D-2464 for threaded Schedule 80 fittings. Belled end pipe socket dimensions shall conform to ASTM D-2672 or F-480.
278
30.11.2007
10:35 Uhr
Seite 279
Conversion Table
Tensile Strength
lbs/sq.in.
kg/mm2
Mpa
t/sq.in
lb/sq.in.
kg/ mm2
Mpa
10
22,400
15.75
154,3
52
116,480
81.90
802,6
11
24,640
17.32
169,7
54
120,960
85.05
833,4
12
26,880
18.90
185,2
56
125,440
88.20
864,3
13
29,120
20.47
200,6
58
129,920
91.35
895,2
14
31,360
22.05
216,0
60
134,400
94.50
926,1
15
33,600
23.62
231,4
62
138,880
97.65
956,9
16
35,840
25.20
246,9
64
143,360
100.80
987,8
17
38,080
26.77
262,3
66
147,840
103.95
1018,7
18
40,320
28.35
277,8
68
152,320
107.10
1049,5
19
42,560
29.92
293,2
70
156,800
110.25
1080,4
20
44,800
31.50
308,7
72
161,280
113.40
1111,3
21
47,040
33.07
324,0
74
165,760
116.55
1142,1
22
49,280
34.65
339,5
76
170,240
119.70
1173,0
23
51,520
36.22
354,9
78
174,720
122.85
1203,9
24
53,760
37.80
370,4
80
179,200
126.00
1234,8
25
56,000
39.37
385,8
82
183,680
129.15
1265,6
26
58,240
40.95
401,3
84
188,160
132.30
1296,5
27
60,480
42.52
416,6
86
192,640
135.45
1327,4
28
62,720
44.10
432,1
88
197,120
138.60
1358,2
29
64,960
45.67
447,5
90
201,600
141.75
1389,1
30
67,200
47.25
463,0
92
206,080
144.90
1420,0
31
69,440
48.82
478,4
94
210,560
148.05
1450,8
32
71,680
50.40
493,9
96
215,040
151.20
1481,7
33
73,920
51.97
509,3
98
219,520
154.35
1512,6
34
76,160
53.55
524,7
100
224,000
157.50
1543,5
35
78,400
55.12
540,1
102
228,480
160.65
1574,3
36
80,640
56.70
555,6
104
232,960
163.80
1605,2
37
82,880
58.27
571,0
106
237,440
166.95
1636,1
38
85,120
59.85
586,5
108
241,920
170.10
1666,9
39
87,360
61.42
601,9
110
246,400
173.25
1697,8
1728,7
40
89,600
63.00
617,4
112
250,880
176.40
41
91,840
64.57
632,7
114
255,360
179.55
1759,5
42
94,080
66.15
648,2
116
259,840
182.70
1790,4
43
96,320
67.72
663,6
118
264,320
185.85
1821,3
44
98,560
69.30
679,1
120
268,800
189.00
1852,2
45
100,800
70.87
694,5
122
273,280
192.15
1883,0
46
103,040
72.45
710,0
124
277,760
195.30
1913,9
47
105,280
74.02
725,3
126
282,240
198.45
1944,8
48
107,520
75.60
740,8
128
286,720
201.60
1975,6
49
109,760
77.17
756,2
130
291,200
204.85
2007,5
50
112,000
78.75
771,7
132
295,680
208.00
2038,4
T/sq.in.
______________________
______________________
______________________
______________________
279
30.11.2007
10:35 Uhr
______________________
______________________
______________________
______________________
Seite 280
Conversion Table
Hardness
Brinell
Dia. Imp.
For
10 mm
Ball
67.7
67.0
66.3
65.5
64.8
64.0
63.3
62.5
61.7
61.0
60.5
60.0
58.9
57.1
56.1
54.4
51.9
50.7
49.5
47.5
46.0
44.8
43.7
42.4
41.3
39.9
38.8
37.7
36.7
35.0
34.0
33.0
32.0
30.9
29.8
29.0
27.5
26.6
25.2
24.3
23.0
22.0
20.8
280
900
880
860
840
820
800
780
760
740
725
710
698
670
630
609
572
532
517
497
470
452
437
422
408
395
381
370
359
349
337
327
318
308
300
292
284
275
269
261
255
247
241
234
228
2.44
2.45
2.50
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
3.00
3.05
3.10
3.15
3.20
3.25
3.30
3.35
3.40
3.45
3.50
3.55
3.60
3.65
3.70
3.75
3.80
3.85
3.90
3.95
4.00
4.05
4.10
Carbide
Ball
630
627
601
578
555
534
514
495
477
461
444
429
415
401
388
375
363
352
341
331
321
311
302
293
285
277
269
262
255
248
241
235
229
223
217
Tensile Stress
Equivalents
Standard
Ball
495
477
641
444
429
415
401
388
375
363
352
341
331
321
311
302
293
285
277
269
262
255
248
241
235
229
223
217
132
127
122
117
112
108
105
101
98
95
92
88
85
82
80
77
75
73
71
68
66
64
63
61
59
58
56
55
53
51
50
49
48
295
284
273
262
250
241
235
226
219
212
206
197
190
183
179
172
168
163
159
152
147
143
141
136
132
130
125
123
118
114
112
110
107
Scler Scope
Hardness
Number
kg/mm2
208
200
192
184
176
170
165
160
155
150
145
139
134
129
126
121
118
114
111
107
104
101
99
96
93
91
89
87
84
81
79
77
76
Rockwell
Diamond
Pyramid
Scale HV10
HV30
MPa
(N/mm2)
96
95
93
92
90
88
87
86
84
82
2039
1961
1884
1807
1729
1668
1621
1559
1513
1467
1420
1359
1312
1266
1235
1189
1158
1127
1096
1050
1019
988
973
942
911
895
865
849
818
787
772
756
-
81
78
75
73
71
68
66
64
62
60
58
56
54
52
51
49
48
46
45
43
42
41
40
38
37
36
35
34
33
32
31
30
-
85.6
85.0
84.7
84.2
83.8
83.4
83.0
82.6
82.2
81.8
81.5
81.2
80.6
79.6
79.0
78.2
76.9
76.3
75.5
74.2
73.5
73.0
72.5
71.5
71.0
70.3
69.8
69.2
68.8
68.0
67.5
66.8
66.2
65.7
65.2
64.6
64.0
63.6
62.9
62.6
62.0
61.6
60.7
-
67.7
67.0
66.3
65.5
64.8
64.0
63.3
62.5
61.7
61.0
60.5
60.0
58.9
57.1
56.1
54.4
51.9
50.7
49.5
47.5
46.0
44.8
43.7
42.4
41.3
39.9
38.8
37.7
36.7
35.0
34.0
33.0
32.0
30.9
29.8
29.0
27.5
26.6
25.2
24.3
23.0
22.0
20.8
900
880
860
840
820
800
780
760
740
725
710
698
670
630
609
572
532
517
497
470
452
437
422
408
395
381
370
359
349
337
327
318
308
300
292
284
275
269
261
255
247
241
234
228
30.11.2007
10:35 Uhr
Seite 281
Conversion Table
Hardness
Diamond Pyramid
Scale
HV10 HV30
Brinell
Dia. Imp.
For
10 mm
Tensile Stress
Equivalents
Carbide
Ball
Standard
Ball
212
207
197
187
179
170
163
156
149
143
137
131
126
121
116
212
207
197
187
179
170
163
156
149
143
137
131
126
121
116
Scler Scope
Hardness
Number
kg/mm2
Ball
98
97
96
93
91
88.5
86
84.2
82
80
77
75
72.5
70
67
222
218
212
196
188
178
171
163
156
150
143
137
132
127
122
4.15
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
Rockwell Diamond
Hardness Pyramid
B Scale Scale HV10
HV30
MPa
(N/mm2)
46
45
43
41
39
33
35
34
32
31
30
29.5
29
28
26
103
101
97
92
88
81
78
76
72
69
67
66
65
63
58
73
71
68
65
62
57
55
54
51
49
48
47
46
44
42
710
695
664
632
602
556
540
525
494
479
463
455
448
432
401
29
28
27
25
24
23
22
21
20.5
20
15
98
97
96
93
91
88.5
86
84.2
82
80
77
75
72.5
70
67
222
218
212
196
188
178
171
163
156
150
143
137
132
127
122
Hardness
Hardness is the property of a material that enables it to resist plastic deformation, penetration, indentation, and scratching.
Therefore, hardness is important from an engineering standpoint because resistance to wear by either friction or erosion by steam,
oil, and water generally increases with hardness.
Hardness tests serve an important need in industry even though they do not measure a unique quality that can be termed hardness.
The tests are empirical, based on experiments and obsevation, rather than fundamental therory. Its chief value is as an inspection
device, able to detect certain differences in material when they arise even though these differences may be undefinable. For example,
two lots of material that have the same
hardness may or may not be alike, but if their hardness is different, the materials certainly are not alike.
Serveral methods have been developed for hardness testing. Those most often used are Brinell, Rockwell, Vickers, Tukon, Sclerscope,
and the files test. The first four are based on indentation tests and the fifth on the rebound height of a diamond-tipped metallic hammer. The file test establishes the characteristics of how well a file takes a bite on the material.
As a result of many tests, comparisons have been prepared using formulas, tables, and graphs that show the relationships between
the results of various hardness test of specific alloys. There is, however, no exact mathematical relation between any two of the
methods. For this reason, the result of one type of hardness test converted to readings of another type should carry the notation"_____converted from_____" (for example 352 Brinell converted from Rockwell C-38).
Another convenient conversion is that of Brinell hardness to ulitmate tensile strenght. For quenched and tempered steel, the tensile
strength (psi) is about 500 times the Brinell hardness number (provided the strength is not over 200,00 psi).
281
Hardness
B Scale
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
______________________
______________________
______________________
______________________
Seite 282
Conversion Table
inch/mm
inches
fractional
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
282
decimal
metric
mm
0.0039
0.0079
0.0118
0.0156
0.0157
0.0197
0.0236
0.0276
0.0313
0.0315
0.0354
0.0394
0.0433
0.0469
0.0472
0.0512
0.0551
0.0591
0.0625
0.0630
0.0669
0.0709
0.0748
0.0781
0.0787
0.0827
0.0866
0.0906
0.0938
0.0945
0.0984
0.1094
0.1181
0.1250
0.1378
0.1406
0.1563
0.1575
0.1719
0.1772
0.1875
0.1969
0.2031
0.2165
0.2188
0.2344
0.2362
0.2500
0.2559
0.2656
0.2756
0.2813
0.10000
0.20000
0.30000
0.39690
0.40000
0.50000
0.60000
0.70000
0.79380
0.80000
0.90000
1.00000
1.10000
1.19060
1.20000
1.30000
1.40000
1.50000
1.58750
1.60000
1.70000
1.80000
1.90000
1.98440
2.00000
2.10000
2.20000
2.30000
2.38130
2.40000
2.50000
2.77810
3.00000
3.17500
3.50000
3.57190
3.96880
4.00000
4.36560
4.50000
4.76250
5.00000
5.15940
5.50000
5.55630
5.95310
6.00000
6.35000
6.50000
6.74690
7.00000
7.14380
inches
fractional
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
decimal
metric
mm
0.55120
0.56250
0.57090
0.57810
0.59060
0.59380
0.60940
0.61020
0.62500
0.62990
0.64060
0.64960
0.65630
0.66930
0.67190
0.68750
0.68900
0.70310
0.70870
0.71880
0.72830
0.73440
0.74800
0.75000
0.76560
0.76770
0.78130
0.78740
0.79690
0.80710
0.81250
0.82680
0.82810
0.84380
0.84650
0.85940
0.86610
0.87500
0.88580
0.89063
0.90550
0.90625
0.92188
0.92520
0.93750
0.94490
0.95313
0.96460
0.96875
0.98430
0.98438
1.00000
14.0000
14.2875
14.5000
14.6844
15.0000
15.0813
15.4781
15.5000
15.8750
16.0000
16.2719
16.5000
16.6688
17.0000
17.0656
17.4625
17.5000
17.8594
18.0000
18.2563
18.5000
18.6531
19.0000
19.0500
19.4469
19.5000
19.8438
20.0000
20.2406
20.5000
20.6375
21.0000
21.0344
21.4313
21.5000
21.8281
22.0000
22.2250
22.5000
22.6219
23.0000
23.0188
23.4156
23.5000
23.8125
24.0000
24.2094
24.5000
24.6063
25.0000
25.0031
25.4000
inches
fractional
2 1/4
2 1/2
2 3/4
3 1/2
decimal
metric
mm
1.8898
1.9291
1.9685
2.0000
2.0079
2.0472
2.0866
2.1260
2.1654
2.2047
2.2441
2.2500
2.2835
2.3228
2.3622
2.4016
2.4409
2.4803
2.5000
2.5197
2.5591
2.5984
2.6378
2.6772
2.7165
2.7500
2.7559
2.7953
2.8346
2.8740
2.9134
2.9528
2.9921
3.0000
3.0315
3.0709
3.1102
3.1496
3.1890
3.2283
3.2677
3.3071
3.3465
3.3858
3.4252
3.4646
3.5000
3.5039
3.5433
3.5827
3.6220
3.6614
48.0000
49.0000
50.0000
50.8000
51.0000
52.0000
53.0000
54.0000
55.0000
56.0000
57.0000
57.1500
58.0000
59.0000
60.0000
61.0000
62.0000
63.0000
63.5000
64.0000
65.0000
66.0000
67.0000
68.0000
69.0000
69.8500
70.0000
71.0000
72.0000
73.0000
74.0000
75.0000
76.0000
76.2000
77.0000
78.0000
79.0000
80.0000
81.0000
82.0000
83.0000
84.0000
85.0000
86.0000
87.0000
88.0000
88.9000
89.0000
90.0000
91.0000
92.0000
93.0000
30.11.2007
10:35 Uhr
Seite 283
19/64
5/16
21/64
11/32
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
decimal
metric
mm
0.2953
0.2969
0.3125
0.3150
0.3281
0.3346
0.3438
0.3543
0.3594
0.3740
0.3750
0.3906
0.3937
0.4063
0.4134
0.4219
0.4331
0.4375
0.4528
0.4531
0.4688
0.4724
0.4844
0.4921
0.5000
0.5118
0.5156
0.5313
0.5315
0.5469
7.50000
7.54060
7.93750
8.00000
8.33440
8.50000
8.73130
9.00000
9.12810
9.50000
9.52500
9.92190
10.0000
10.3188
10.5000
10.7156
11.0000
11.1125
11.5000
11.5094
11.9063
12.0000
12.3031
12.5000
12.7000
13.0000
13.0969
13.4938
13.5000
13.8906
inches
fractional
1 1/4
1 1/2
1 3/4
decimal
metric
mm
1.00390
1.02360
1.04330
1.06300
1.08270
1.10240
1.12200
1.14170
1.16140
1.18110
1.22050
1.25000
1.25980
1.29920
1.33860
1.37800
1.41730
1.45670
1.49610
1.50000
1.53540
1.57480
1.61420
1.65350
1.69290
1.73230
1.75000
1.77170
1.81100
1.85040
25.5000
26.0000
26.5000
27.0000
27.5000
28.0000
28.5000
29.0000
29.5000
30.0000
31.0000
31.7500
32.0000
33.0000
34.0000
35.0000
36.0000
37.0000
38.0000
38.1000
39.0000
40.0000
41.0000
42.0000
43.0000
44.0000
44.4500
45.0000
46.0000
47.0000
inches
fractional
4
4 1/2
5
8
10
20
30
40
60
80
100
decimal
metric
mm
3.7008
3.7402
3.7795
3.8189
3.8583
3.8976
3.9370
4.0000
4.3307
4.5000
4.7244
5.0000
5.1181
5.5118
5.9055
6.0000
6.2992
6.6929
7.0866
7.4803
7.8740
8.0000
9.8425
10.000
20.000
30.000
40.000
60.000
80.000
100.00
94.0000
95.0000
96.0000
97.0000
98.0000
99.0000
100.000
101.600
110.000
114.300
120.000
127.000
130.000
140.000
150.000
152.400
160.000
170.000
180.000
190.000
200.000
203.200
250.000
254.000
508.000
762.000
1016.00
1524.00
2032.00
2540.00
283
inches
fractional
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
______________________
______________________
______________________
______________________
Seite 284
Conversion Table
Inches
Millimeters
25.4
Millimeters
0.03937
Inches
Feet
0.3048
Metres
Yards
0.9144
Metres
Metres
Inches
Metres
3.2808
Yards
Kilometres
0.6214
Miles
Miles
1.6093
Kilometres
Square centimetres
0.1550
Square inches
Square inches
6.4516
Square centimetres
Sqare metres
10.7639
Sqare Metres
Sqare metres
1.1960
Sqare yards
Sqare yards
0.8361
Sqare metres
39.37
Sqare feets
0.0929
Sqare metres
Cubic centimetres
0.0610
Cubic inches
Cubic inches
16.3871
Cubic centimetres
Cubic metres
35.3147
Cubic feet
Cubic feet
0.0283
Cubic metres
Centimetres4
0.024025
Inches4
Inches4
41.623
Centimetres4
Grams
15.432
Grains
Grains
0.0648
Grams
Kilograms
2.2046
Pounds
Pounds
0.45359
Kilograms
0.9842
Long Tons
Long Tons
1.016
Metric tons
0.2048
4.882
33.9056
0.02949
14.223
0.0703
1.5749
36.1273
0.06243
1.68555
0.0277
16.019
0.5933
2.016
0.672
0.496
1.488
284
30.11.2007
10:35 Uhr
Seite 285
Conversion Table
Pressure
______________________
______________________
______________________
______________________
cm H2O
ft H2O
inches Hg
6.894.757
0.070306958
70.306.927
2.306.723
203.602
0.01019716
1.019.745
0.3345618
0.2952997
14.233.343
9.806.694
1.000.026
32.809.312
2.895.901
cm H2O
0.0142229
0.0980634
0.00099997
0.032808
0.0289581
ft H2O
0.433515
2.968.916
0.03047912
30.48
0.882646
inches Hg
0.4911542
3.386.389
0.0345316
3.453.253
1.132.957
mm Hg
0.0193368
0.1333225
0.00135951
1.359.554
0.0446046
0.039370079
inches
H2O
0.03612628
0.2490819
0.00254219
2.54
0.08333
0.0735539
oz /
inches2
0.0625
0.4309223
0.004394308
4.394.308
0.14417
0.12725125
at
14.696
10.132.535
1.033.231
10.332.633
338.995
299.213
bar
14.5038
100
1.019.716
10.197.466
334.833
29.53
mbar
0.0145
0.1
0.001019
1.019
0.003456
0.02953
Mpa
0.00689
0.001
10.197
10197.45
334.56
295.299
inches H2O
oz /
at
bar
mbar
Mpa
0.068046
0.06894757
689.476
0.00689
0.001
kPa
psi
kPa
0.1450377
kg/cm2
inches
psi
2.768.068
16
kPa
401.472
2.320.603
0.009669235
0.01
10
kg/cm2
393.711.806
22.757.349
0.967841569
0.98066494
1013.25
0.09806
cm H2O
0.3937
0.227566
0.000967814
0.000980634
0.9806
0.00098
ft H2O
12
693.624
0.02949896
0.02968961
29.689
0.00298
inches Hg
13.595.484
785.847
0.0334211
0.03386389
338.639
0.00386
mm Hg
0.535255
0.3093888
0.001315789
0.001333225
133.322
0.00013
inches
H2O
0.57802
0.00245825
0.002490819
249.089
0.000249
oz
inches2
173.004
0.004252875
0.004309223
4.309
0.0004309
at
406.794
235.136
10.132.535
1013.25
0.1013
bar
4.018.596
2.320.608
0.986923
1000
0.1
mbar
0.40146
0.32306
0.00099
0.001
0.0001
Mpa
4014.74
2.320.603
9.669
0.1
kg/cm2
psi
285
30.11.2007
______________________
______________________
______________________
______________________
10:35 Uhr
Seite 286
C.C.C.N.C
Customs Co-operation Council Nomenclature (formerly B.T.N Brussel Tariff Nomenclature):
Demurrage
Charges made for delay to vessels or godds after a stated free period.
D.N.V.
Det Norske Veritas
E.E.C.
European Economic Community
E.T.A.
Estimated Time of Arrival
E.T.D.
Estimated Time of Departure
E.T.S.
Estimated Time of Sailing
Ex Works
The consignee is responsible for all carriage/freight charges, any taxes, duty handling charges an road transport
from the supply source onwards. The supplier will normally load the materials at his factory, but there his
responsibility ends.
F.O.T.
Free on Truck. Supplier loads materials free on to vehicle from whence his responsibility ends.
F.A.S.
Free Alongside. Includes delivery to airport, depot or docksas part of invoiceprice to the consignee. Does not
include any charges made for unloading the vehicle.
F.O.B.
Free on Board. One stage further than F.A.S. The supplier has included in his invoice to the consignee the cost of
delivery to the airport, depot or docks, handling an documentation chargesaboard the carrying vessel. The
consignee is responsible for all handling, customs clearence, plus any duty taxes on arrival.
F.O.B. LT
Free on Board Liner Terms. Applies mainly to Antwerp & Rotterdam ports. Definition as per F.O.B.above, exept
supplier is responsible for cots for materials landed on quayside. Price for loading over ships rail is usually
included in fright price payable by company arranging delivery to destinaation port.
F.I.O.
Free In and Out. Charterer of vessel pays for cost of loading and discharging cargo.
F.C.R.
Forwarder Certificate of Receipt
G.F.N.
Gross for Net. Gross weight to be charged wich may include packing used to protect an bundlematerials.
L/C*
Letter of Credit
L.R.S.
Lloyds Register of Shipping
M.R.
Mates Receipt
M/V
Motor Vessel
N.S.S.N.
National Standart Shipping Note
Pro-forma
A specimen document, usually an invoice, presented to client for approval prior to offical order placement and
payment of goods.
S.A.D.
Single Administrative Document (for Customs)
Without Engagement
No liability to accept an offer at the price quoted if price go against the seller in the meantime
*Please ensure Letters of Credit always show that Bilss of Lading will be accept if clauses relating to rust-staining/oxidation of
materials are shown.
286
30.11.2007
10:35 Uhr
Seite 287
2.020
1.920
1.820
1.720
1.620
1.520
1.420
1.321
1.270
1.219
1.168
1.120
1.067
1.016
965
914
864
813
762
711
660
610
559
521
508
470
457.2
419
406.4
368
355.6
323.9
318
298.5
273
267
244.5
219.1
216
193.7
177.8
168.3
165.1
159
152.4
141.3
139.7
133
127
121
114.3
108
101.6
88.9
76.1
73.0
70.0
63.5
60.3
57.0
51.0
Outside Diameter
inch (N.B.)
64
52
50
48
46
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
14
12
10
4
3 1/2
3
2 1/2
measuring incl.
mm wall
m/m3
x measuring
measuring/m
with 100 /m3
85.5
81.5
77.0
72.5
68.5
64.0
60.0
55.5
53.5
51.5
49.4
47.4
45.1
43.0
40.8
38.7
36.5
34.4
32.2
30.1
27.9
25.8
23.6
22.0
21.5
19.9
19.3
17.7
17.2
15.5
15.0
13.7
13.4
12.6
11.5
11.3
10.3
9.2
9.1
8.2
7.5
7.1
6.9
6.7
6.4
5.9
5.9
5.6
5.3
5.1
4.8
4.5
4.3
3.7
3.2
3.0
2.9
2.6
2.5
2.4
2.1
0.25
0.27
0.30
0.34
0.38
0.43
0.50
0.57
0.62
0.67
0.73
0.80
0.88
0.97
1.07
1.20
1.34
1.51
1.72
1.98
2.30
2.69
3.20
3.68
3.88
4.53
4.78
5.70
6.05
7.38
7.91
9.53
9.89
11.22
13.42
14.03
16.73
20.83
21.43
26.65
31.63
35.30
36.69
39.56
43.06
50.09
51.24
56.53
62.00
68.30
76.54
85.73
96.88
126.53
172.68
187.65
204.08
248.00
275.03
307.79
384.47
4.08
3.69
3.312
2.96
2.62
2.31
2.02
1.75
1.61
1.49
1.36
1.25
1.14
1.03
0.93
0.84
0.75
0.66
0.58
0.51
0.44
0.37
0.31
0.27
0.26
0.22
0.21
0.176
0.165
0.135
0.127
0.105
0.101
0.089
0.075
0.071
0.06
0.048
0.047
0.038
0.032
0.028
0.027
0.025
0.023
0.02
0.02
0.018
0.016
0.015
0.013
0.012
0.01
0.008
0.006
0.005
0.005
0.004
0.004
0.003
0.003
208.63
188.99
169.36
151.26
134.18
118.13
103.10
89.22
82.47
75.98
69.75
64.14
58.21
52.78
47.61
42.71
38.17
33.80
29.69
25.85
22.27
19.03
15.98
13.88
13.20
11,29
10.69
8.98
8.45
6.92
6.47
5.36
5.17
4.56
3.81
3.65
3.06
2.45
2.39
1.92
1.62
1.45
1.40
1.29
1.19
1.02
1.00
0.90
0.82
0.75
0.67
0.60
0.53
0.40
0.30
0.27
0.25
0.20
0.18
0.17
0.13
mm
______________________
______________________
______________________
______________________
287
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 288
Glossary
288
30.11.2007
10:35 Uhr
Seite 289
Glossary
______________________
______________________
______________________
______________________
AUSTEMPERING - Cooling an austenitized steel at a rate high enough to suppress formation of high-temperature transformation products, then holding the steel at a temperature below that for pearlite formation and above that for martensite formation until transformation to an essentially bainitic structure is complete.
AUSTENITE - Phase in certain steels, characterized as a solid solution, usually of carbon or iron carbide, in the gamma
form of iron. Such steels are known as "austenitic". Austenite
is stable only above 1333 F. in a plain carbon steel, but the presence of certain alloying elements, such as nickel and
manganese, stabilizes the austenitic form, even at normal temperatures.
AUSTENITIC STEEL - Steel which, because of the presence of alloying elements, such as manganese, nickel, chromium,
etc., shows stability of Austenite at normal temperatures.
BAINITE - A slender, needle-like (acicular) microstructure appearing in spring steel rip characterized by toughness and
greater ductility than tempered Martensite. Bainite is a decomposition product of Austenite (see Austensite) best developed at interrupted holding temperatures below those forming fine pearlite and above those giving Martensite.
BASIC OXYGEN PROCESS - A Steel making process wherein oxygen of the highest purity is blown onto the surface of a
bath of molten iron contained in a basic lined and ladle shaped vessel. The melting cycle duration is extremely short
with the quality comparable to Open Hearth Steel.
BASIC PROCESS - A steel making process either Bessemer, open hearth, or electric, in which the furnace is lined with
a basic refractory. A slag, rich in lime, being formed and phosphorus removed.
BATH ANNEALING - Is immersion in a liquid bath (such as molten lead or fused salts) held at an assigned temperature
when a lead bath is used, the process is known as lead annealing.
BEADING - Raising a ridge on sheet metal.
BEND TEST - Various tests used to determine the toughness and ductility of flat rolled metal sheet, strip or plate, in
which the material is bent around its axis or around an outside radius. A complete test might specify such a bend to be
both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be used the line the jaws with some soft metal or brass, so
as to permit a free flow of the metal in the sample being tested
BESSEMER PROCESS - A steel making process in which air is blown through the molten iron so that the impurities are
thus removed by oxidation.
BILLET - A solid, semi-finished steel round or square product that has been hot worked by forging, rolling or extrusion
usually smaller than a bloom.
BLACK OIL TEMPERED SPRING STEEL STRIP - (Scaleless Blue)-A flat cold rolled usually .70/.80 medium high carbon
spring steel strip, blue-black in colour, which has been quenched in oil and drawn to desired hardness. While it looks
and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and
is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold
down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not
have the same degree of spring-back.
BLAST FURNACE - A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pig iron.
The furnace is continuous in operation using iron ore, coke and limestone as raw materials that are charged at the top
while the molten iron and slag are collected at the bottom and are tapped out at intervals.
289
A.S.T.M. - Abbreviation for American Society for Testing Material An organization for Issuing standard specifications on
materials, including metals and alloys.
30.11.2007
10:35 Uhr
______________________
______________________
______________________
______________________
Seite 290
Glossary
BLISTER - A defect in metal produced by gas bubbles either on the surface or formed beneath the surface while the
metal is hot or plastic. Very fine blisters are called pin-head or pepper blisters.
BLOOM - (Slab, Billet, Sheet-Bar.) Semi-finished products, hot rolled from ingots. The chief differences are in their cross
sectional areas in ratio of width to thickness, and in their intended use.
BLOOMING-MILL - A mill used to reduce ingots to blooms, billets, slabs, sheet-bar etc., (See Semi-finished Steel)
BLOWHOLE - A cavity produced during the solidification of metal by evolved gas, which in failing to escape is held in pokkets.
BLUE TEMPERED SPRING STEEL STRIP- (See Tempered Spring Steel Strip)
BLUING - (1) Sheets - A method of coating sheets with thin, even film of bluish-black oxide, obtained by exposure to an
atmosphere of dry steam or air, at a temperature of about 1000 F.,generally this is done during box-annealing. (2)
Bluing of tempered spring steel strip; a oxide film blue in color produced by low temperature heating.
BORON - (chemical SymbolB) Element N. 5 of the periodic system, (atomic weight 10.82)
It is gray in color, ignites at abourt 1112 F. and burns with a brilliant green flame, but its melting point in a non-oxidizing atmosphere is about 4000 F. Boron is used in steel in minute quantites for one purpose only-to increase the hardenability as in case hardening and to increase strength and hardness penetration.
BOW - (See Camber.)
BOX ANNEALING - A process of annealing a ferrous alloy in a suitable closed metal container, with or without packing
materials, in order to minimize oxidation. The charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly.
BRALE - A diamond penetrator, conical in shape, used with a Rockwell hardness tester for hard metals.
BRAZING - Joining metals by fusion of nonferrous alloys that have melting points above 800 F., but lower than those
of the metals being joined.This may be accomplished by means of a torch (torch brazing), in a furnace (furnace brazing)
or dipping in a molten flux bath (dip of flux brazing)
BRIGHT ANNEALING - A process of annealing usually carried out in a controlled furnace atmosphere so that surface oxidation is reduced to a minimum and the surface remains relatively bright.
BRIGHT BASIC WIRE - Bright steel wire, slightly softer than Bright Bessemer Wire. Used for round head wood screws,
bolts and rivets, electrics welded chain, etc.
BRIGHT COMMERCIAL FINISH - Refer to Finishes
BRINELL HARDNESS (TEST) - A common standard method of measuring the hardness of certain metals. The smooth
surface of the metal is subjected to indentation by a hardened steeel ball under pressure or load. A special microscope measures the diameter of the resultant indenation in the metal surface, and the Brinell hardness value is read from
a chart or calculated by formula.
BRITTLENESS The tendency of a material to fracture without first undergoing significant plastic deformation.
BROACHING - Multiple shaving, accomplished by pushing a tool with stepped cutting edges along the work, particularly
through holes.
BROWN & SHARPE GAGES (B&S) - A standard series of sizes arbitrarily indicated, as by numbers, to which the diameter of wire or thickness of sheet metal is usually made and which is used in the manufacture of brass, bronze, cooper.
copper-base alloys and alluminium. These gage numbers have definite relationship to each otheer.By this system the
290
30.11.2007
10:35 Uhr
Seite 291
Glossary
______________________
______________________
______________________
______________________
BUCKLE - Alternate bulges or hollows recurring along the length of the product with the edges remaining relatively flat.
BURNING - Heating a metal beyond the temperature limits allowable for the desired heat treatment, or beyond the
point where serious oxidation or other detrimental action begins.
BURR - A thin ridge or roughness left by a cutting operation such as in metal slitting, shearing, blanking or sawing.
This is common to a No. 3 slit edge in the case of steel.
BUTT WELDING Joining two edges or ends by placing one against the other and welding them.
CAMBER OR BOW - Edgewise curvature. A lateral departure of a side edge of sheet or strip metal from a straight line.
CARBIDE - A ocmpound of carbon with one or more metallic elements.
CARBON (Chemical symbol C) - Element No. 6 of the periodic system; atomic weight 12.01; has three allotropic modifications, all non-metallic. Carbon is present in partically all ferrous alloys, and has tremendous effect on the properties of the resultant metal. Carbon is also an essential component of the cemented carbides. Its metallurgical use, in
the form of coke, for reduction of oxides, is very extensive.
CARBON RANGE - In steel specifications, the carbon range is the difference between minimum and maximum
amount of carbon acceptable.
CARBON STEEL - Common or ordinary steel as contrasted with special or alloy steels, which contain other alloying
metals in addition to the usual constituents of steel in their common percentages.
CARBURIZING - (Cementation.) Adding carbon to the surface of iron-base alloys by absorption through heating the
metal at a temperature below its melting point in contact with cabonaceous solids, liquids or gases. The oldest
method of case hardening.
CASE - In a ferrous alloy,the outer portion that has been made harder than the inner portion, or core ( see hardening)
CASE HARDENING - A generic term covering several processes applicable to steel that change the chemical composition of the surface layer by absporption of carbon or nitrogen, or a mixture of the two, and, by diffusion, create a concentration gradient.
CHATTER MARKS (Defect) - Parallel indentations or marks appearing at right angles to edge of strip forming a pattern
at close and regular intervals, caused by roll vibrations.
CHEMICAL POLISHING - Improving the specular reflectivity of a metal surface by chemical treatment.
CHROMIUM (Chemical symbol Cr) - Element No.24 of the periodic system, atomic weight 52.01. It is of bright silvery
color, relatively hard. It is strongly resistant tob atmospheric and other oxidation. It is of great value in the manufascture of Stainless Steel as an iron-base alloy Chromium platinghas also become a large outlet for the metal. Itrs
principal functions as an alloy in steel making, (1) increases resistance to corrision and oxidation (2) increases hardenability (3) adds some strength at high temperatures (4) resists abrasion and wear (with high carbon)
CHROMIUM-NICKEL STEEL - Steel usually made by the electric furnace process in which chromium and nickel paricipate as alloying elements.The stainless steel of 18% chromium and 8% nickel are the better known of the chromium
nickel types.
291
decimal thickness is reduced by 50% every six gage numbers-while temper is expressed by the number of B&S gage
number in thickness reduction, there is assigned a hardness value of ? hard. To illustrate: One number hard= ? hard,
two numbers hard= ? hard, etc.
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 292
Glossary
CLAD METAL - A cmposite metal containing two or three layers that have been bonded together. The bonding may have
been accomplished by co-rolling, welding, heavy chemical deposition or heavy electroplating.
CLOCK SPRING STEEL - (see Tempered and Polished Spring Steel Strip .90/.103 carbon range.)
COIL SET - A lengthwise curve or set found in coiled strip metals following its coil pattern. A departure from longitudinal
flatness. Can be removed by roller or stretcher leveling from metals in the softer temper ranges.
COILS - Coiled flat sheet or strip metal-usually in one continuous piece or length.
COIL BREAKES - Creases or Ridges appearing in sheets as parallel lines transverse to the direction of rolling and generally extending across the width of the sheet.
COINING - A process of impressing images or characters of the die and punch onto a plane metal surface.
COLD REDUCED STRIP - Metal strip, made from hot-rolled strip, by rolling on cold-reduction mills.
COLD REDUCTION - Reduction of metal size, usually by rolling or drawing particularly thickness, while the metal is maintained at room temperature or below the recrystallization temperature of the metal.
COLD ROLLED FINISH - Finish obtained by cold rolling plain pickled sheet or strip with a lubricant resulting in a relatively smooth appearance.
COMMERCIAL QUALITY STEEL SHEET - Normally to a ladle analysis of carbon limit at 0.15 max. A Standard Quality
Carbon Steel Sheet.
CONTINUOUS CASTING - A casting technique in which the ingot is continuously solidfied while it is being poured, and
the length is not determined by mold dimensions.
CONTINUOUS FURNACE - Furnace, in which the material being heated moves steadily through the furnace.
CONTINUOUS PICKLING - Passing sheet or strip metal continuously through a series of pickling and washing tanks.
CONTROLLED ATMOSPHERE FURNACES - A furnace used for bright annealing into which specially prepared gases are
introduced for the purpose of maintaining a neutarl atmosphere so that no oxidizing reaction between metal and atmosphere takes place.
CORROSION - Deterioration of a metal by chemical or electrochemical reaction with its environement.
CORROSION EMBRITTLEMENT - The embrittlement caused in certain alloys by exposure to a corrosive environment.
CROP - The defective ends of a rolled or forged product which are cut off and discarded.
Glossary
CROSS BREAK - This term also applied to transverse ribs or ripple.
CROSS ROLLING - A (hot) rolling process in which rolling reduction is carried out in a direction prpendicular to, as well
as a direction parallel to, the length of the original slab.
CROWN - Increased thickness in the center of metal sheet or strip as compared with thickness at the edge.
CRYSTALLIZATION The formation of crystals by the atoms assuming definite positions in a crystal lattice. This is what
happens when a liquid metal solidifies. (Fatigue, the failure of metals under repeated stresses, is sometimes falsely
attributed to crystallization.)
292
30.11.2007
10:35 Uhr
Seite 293
Glossary
______________________
______________________
______________________
______________________
293
CYANIDING Surface hardening of an iron-base alloy article or portion of it by heating at a suitable temperature in
contact with a cyanide salt, followed by quenching.
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 294
Glossary
No.3 Edge-Square, produced by slitting only. Not filed. Width tolerances close.
No.4 Edge-A round edge produced by edge rolling either form a natural mill edge or from slit edge strip. Not
as perfect as No.1 edge Width tolerances liberal.
No.5 Edge-An approximately square edge produced by slitting and filing or slitting and rolling to remove burr.
No.6 Edge-A square edge produced by square edge rolling, generally from square edge hot-rolled occasio
nally from slit strip. Width tolerances and finish not as exacting as No.1 edge.
EDGE FILING A method whereby the raw or slit edges of strip metal are passed or drawn one or more times against
a series of files, mounted at various angles. This method may be used for deburring only or filing to a specific contour
including a completely rounded edge.
EDGING The dressing of metal strip edges by rolling, filing or drawing.
ELASTIC LIMIT Maximum stress that a material will stand before permanent deformation occurs.
ELECTRIC FURNACE STEEL Steel made in any furnace where heat is generated electrically, almost always by arc.
ELONGATION Increase in length which occurs before a metal is fractured, when subjected to stress. This is usually
expressed as a percentage of the original length and is a measure of the ductility of the metal.
EMBOSSING Raising or indenting a design in relief on a sheet or strip of metal by passing between rolls of desired
pattern.
ENDURANCE LIMIT Maximum alternating stress which a given material will withstand for an indefinite number of
times wihtout causing fatigue failure.
ETCHING Subjecting the surface of a metal to chemical or electrolytic attack to reveal structural details.
EXTRUSION Shaping metal into a chosen continuous form by forcing it through a die of appropriate shape.
FATIGUE The phenomenon leading to fracture under repeated or flutuating stresses.
FERROUS Related to iron. Ferrous alloys are, therefore, iron base alloys.
FILED EDGES Finished edges, the final contours of which are produced by drawing the strip over a series of small steel
files.
FINISHED STEEL Steel that is ready for the market without further work or treatment. Blooms, billets, slabs, sheet
bars, and wire rods are termed semifinished.
FINISHES The surface appearance of the various metals after final treatment such as rolling, etc. Over ther years the
following finshes have become recognized as standard in their respective fields.
COLD ROLLED STRIP STEELS
No.1 Finish-A dull finish produced without luster by rolling on roughened rolls.
No.2 Finish-A regular bright finish produced by rolling on moderately bright rolls.
No.3 Finish-Best Bright Finish a lustrous or high gloss finish produced by rolling on highly polished rolls-Also
referred to as Mirror Finish
294
30.11.2007
10:35 Uhr
Seite 295
Glossary
295
(
(
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 296
______________________
______________________
______________________
______________________
Glossary
HARDNESS (INDENTATION) - Resistance of a metal to plastic deformation by indentation. Various hardness tests such
as Brinell, Rockwell and Vickers may be used.
HEAT-AFFECTED ZONE - That potion of the base metal which was not melted during brazing, cutting or welding, but within which microstructure and physical properties were altered by the treatment.
HEAT OF STEEL - The product of a single melting operation in a furnace, starting with the charging of raw materials and
ending with the tapping of molten metal and consequently identical in its characteristics.
HEAT TREATMENT - Heating and cooling a solid metal or alloy in such a way that desired structures, conditions or properties are attained. Heating for the sole purpose of hot working is excluded from the meaning of this term.
IMPACT TEST - A test for determining the behaviour of materials when subjected to high rates of loading under conditions designed to promote fracture, usually in bending, tension or torsion. The quantity measured is the energy absorbed
when a single blow breaks the specimen.
IMPURITIES - Elements or compounds whose presence in a material is undesired.
INCLUSIONS - Particles of impurities (usually oxides, sulphides, silicates, etc.) that are held mechanically or are formed
during the solidification or by subsequent reaction within the solid metal.
INDENTATION HARDNESS - The resistance of a material to indentation. This is the usual type of hardness test, in which
a pointed or rounded indenter is pressed into a surface under a substantially static load.
INDUCTION HARDENING - A process of hardening a ferrous alloy by heating it above the transformation range by means
of electrical induction, and then cooling as required.
INDUCTION HEATING - A process of heating by electrical induction.
INGOT - A casting suitable for hot working or re-melting.
INTERMEDIATE ANNEALING - An annealing treatment given to wrought metals following cold work hardening for the purpose of softening prior to further cold working.
IRON - An element that has an average atomic number of 55.85 and that always, in engineering practice, contains small
but significant amounts of carbon. Thus iron-carbon alloys containing less than about 0.1% C may be referred to as
irons. Alloys with higher carbon contents are always termed steels.
KILLED STEEL - Steel deoxidised with a strong deoxidising agent, such as silicon or aluminium, to reduce the oxygen
content to such a level that no reaction occurs between carbon and oxygen during solidification.
LAMINATIONS - A defect appearing in sheets or strips as segregation or in layers to become divided caused by gas pokkets in the ingot.
LADLE ANALYSIS - A term applied to the chemical analysis representative of a heat of steel as reported by the producer. It is determined by analyzing a test ingot sample obtained during the pouring of the steel from a ladle.
MACHINABILITY - The capacity of a material to be machined easily.
MACROETCHING - Etching of a metal surface with the objective of accentuating gross structural details, for observation by the unaided eye or at magnifications not exceeding ten diameters.
MACROGRAPH - A graphic reproduction of a prepared surface of a specimen at a magnification not exceeding ten diameters. When photographed, the reproduction is known as a photomacrograph (not a macrophotograph).
296
30.11.2007
10:35 Uhr
Seite 297
Glossary
______________________
______________________
______________________
______________________
MANGANESE (Chemical symbol Mn) Element No 25 of the periodic system. Atomic weight 54.93 Lustrous, reddishwhite metal of hard, brittle, and therefore non-malleable, character. The metal is used in large quantities in the form of
Spiegel and Ferromanganese for steel manufacture as well as in manganese and many copper base alloys. Its principal function is as an alloy in steel making (1) It is a ferrite strengthening and carbide forming element. It increases hardenability inexpensively with a tendency toward embrittlement when too high carbon and too high manganese accompany each other (2) It counteracts brittleness from sulfur.
MECHANICAL PROPERTIES Those properties of a material that reveal the elastic and inelastic reaction when force is
applied, or that involve the relationship between strress and strain, for example elasticity, tensile strength and fatigue
limit. These properties have often been designated as physical properties.
MECHANICAL WORKING Plastic deformation or other physical change to which metal is subjected, by rolling, hammering, drawing, etc. to change its shape, properties or structure.
MELTING RANGE The range of temperature in which an alloy melts.
METALLOGRAPH An optical instrument designed for both visual observation and photomicrography of prepared surfaces of opaque materials at magnificatons ranging from about 25 to 1500 diameters.
MICROSTRUCTURE The structure of a prepared surface of a metal as revealed by a microscope at a magnification
greater than ten diameters.
MILL EDGE The edge of strip, sheet or plate in the as rolled state.
MOLYBDENUM (Chemical symbol MO) Element No. 42 of the periodic system; atomic weight 95.95. Hard, tough
metal of grayish-white color, becoming very ductile and malleable when properly treated at high temperatures; melting
point 4748 F.; boiling point about 6600 F specific gravity 10.2. Its principal functions as an alloy in steel making(1)
Raises grain-coarsening temperature of austenite. (2) Deepens hardening (3) Forms abrasion-resisting particles.
NICKEL (Chemical symbol Ni) Element No. 28 of the periodic system; atomic weight 58.69 Silvery white, slightly
magnetic metal, of medium hardness and high degree of ductility and malleability and restistance to chemical and
atmospheric corrosion; melting point 2651 F.; boiling point about 5250 F., specific gravity 8.90.
NITRIDING Process of surface hardening certain types of steel by heating in ammonia gas at about 935-1000 F., the
increase in hardness beeing the result of surface nitride formation. Certain alloying constituents, principal among them
being aluminium, greatly facilitate the hardening reaction. In general, the depth of the case is less than with carburizing.
NON-FERROUS METALS Metals or alloys that are free of iron or comparatively so.
NON-METALLIC INCLUSIONS Impurities (commonly oxides), sulfides, silicates or similar substances held in metals
mechanically during solidification or formed by reactions in the solid state.
NORMALIZING A heat treatment applied to steel. Involves heating above the critical range followed by cooling in still
air. Is performed to refine the crystal structure and eliminate internal stress.
NOTCH BRITTLENESS A measure of the susceptibility of a material to brittle fracture at locations of stress concentration. For example, in a notch tensile test a material is said to be notch brittle if its notch strength is less than its tensile strength; otherwise, it is said to be notch ductile.
297
MALLEABILITY The property that determines the ease of deforming a metal when the metal is subjected to rolling or
hammering. The more malleable metals can be hammered or rolled into thin sheed more easily than others.
30.11.2007
10:35 Uhr
Seite 298
______________________
______________________
______________________
______________________
Glossary
NUCLEUS (1) The first structurally stable particle capable of initiating recrystallization of a phase or the growth of an
new phase, and sepatated from the matrix by an interface. (2) The heavy central core of an atom, in which most of the
mass and the total positive electrical charge are concentrated.
OIL HARDENING A process of hardening a ferrous alloy of suitable composition by heating within or above the transformation range and quenching in oil.
OIL-HARDENING STEEL Steel adaptable to hardening by heat treatment and quenching in oil.
OLSEN (DUCTILITY) TEST A method of measuring the ductility and drawing properties of strip or sheet metal which
involves determination of the width and depth of impression. The test simulating a deep drawing operation is made by
a standard steel ball under pressure continuing until the cup formed from the metal sample fractures. Readings are in
thousandths of an inch.
ORE A mineral from which metal is (or may be) extracted.
OSCILLATE WOUND A method of even winding metal strip or wire on to a reel or mandrel wherein the strands are uniformly over-lapped. The opposite of ribbon wound.
OXIDE Compound of oxygen with another element.
PASS A single transfer of metal though a stand of rolls.
PATTERNED OR EMBOSSED SHEET A sheet product on which a raised or indented pattern has been impressed on
eihter one or both surfaces by the use of rolls.
PEARLITE A eutectoid transformation product of ferrite and cemintite that ideally has a lamellar structure but that is
always degenerate to some extent.
PERMANENT SET Non-elastic or plastic, deformation of metal under strss, after passing the elastic limit.
PHOSHORUS (Chemical symbol P) Element No. 15 of the periodic system, atomic weight 30 g. Non-metallic element
occuring in at least three allotropic forms; melting point 111 F.; boiling point 5360 F.: specific gravity 1.82. In steels it
is usually undesirable with limits set in most specifications.
PHOTOMICROGRAPH A photographic reproduction of any object magnified more than ten diameters.
PHYSICAL PROPERTIES Properties, other than mechanical properties, that pertain to ther physical nature of a material; e.g. density, electrical conductivity, thermal expansion, reflectivity, magnetic susceptibility, etc.
PICKLING The process of chemically removing oxides and scale from the surface of a metal by the action of water
solutions of inorganic acids.
PIPE Contraction cavity, essentially cone-like in shape, which occurs in the approximate center, at the top and reaching down into a casting; caused by the shrinkage of cast metal.
PIT A sharp depression in the surface of the metal.
PLATE A flat-rolled meatal product of some minimum thickness and width arbitrarily dependent on the type of metal.
PLATING A thin coating of metal laid on another metal.
POLISHED SURFACE The finish obtained by buffing with rouge or similar fine abrasive, resulting in a high glosss or
polish.
298
30.11.2007
10:35 Uhr
Seite 299
Glossary
______________________
______________________
______________________
______________________
PREHEATING A general term used to describe heating applied as a preliminary to some further thermal or mechanical treatment.
PROCESS ANNEALING A process by which a ferrous alloy is heated to a temperature close to, but below, the lower
limit of ther transformation range and is subsequently cooled. This process is applied in order to soften the alloy for further cold working.
PYROMETER An instrument of any of various types used for measuring temperatures.
QUARTER HARD (No. 3 TEMPER) In low carbon cols-rolled strip steel, a medium soft temper produced by a limited
amount of cold rolling annealing. Standard hardness range of R/B 60-75.
QUENCHING In the heat treating of metals, the rapid cooling of the metal by immersing the metal in oil or water.
QUENCH HARDENING Hardening by austenitizing and then cooling at a rate such that a substantial amount of austenite is transformed to martensite.
RAGGED EDGES Edges of Sheet or Strip, which are torn, split, cracked, ragged or burred or otherwise disfigured.
RECARBURIZING (1) Increasing the carbon content of molten cast iron or steel by adding carbonnaceous material,
high-carbon pig iron or a high-carbon alloy. (2) Carburizing a metal part to return surface carbon lost in processing.
REFRACTORY A heat-resistant material, usually nonmetallic, which is used for furnace linings and such.
RESIDUAL ELEMENTS Small quantities of elements uninentionally present in an alloy.
RESISTANCE WELDING A type of welding process in which the work pieces are heated by the passage of an electric
current through the contact. Such processes include spot welding, seam or line welding and percussion welding. Flash
and butt welding are sometimes condidered as resistance welding processes.
RESULFURIZED STEEL Steel to which sulfur has been added in controlled amounts after refining. The sulfur is added
to improve machinability.
RIBBON WOUND A term applied to a common method of winding strip steel layer upon layer around an arbor or mandrel.
RIMMED STEEL Low carbon steel conaining sufficient iron oxide to produce continuous evolution of carbon monoxide during ingot solidification, resulting in a case or rim of metal virtually free of voids.
ROCKWELL HARDNESS (TEST) A standard method for measuring the hardness of metals. The hardness is expressed
as a number related to the depth of residual penetration of a steel ball or diamond cone (brale) after a minor load of
10 kilograms has been applied to hold the penetrator in position. This residual penetration is automatically registered
on a dial when the major load is removed from the penetrator.
ROLLED EDGES Finished edges, the final contours of which are produced by side or edging rolls. The edge contours
most commonly used are square corners, rounded corners and rounded edge.
ROLLED IN SCALE A surface defect consisting of scale partially rolled into the surface of the sheet.
ROLLER LEVELING Passing sheet or strip metal through a series of staggered small rolls so as to flatten the metal.
299
POURING The transfer of molten metal from the ladle into ingot molds or other types of molds; for example, in castings.
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 300
Glossary
ROLLING Reducing the cross-sectional area of metal stock, or otherwise shaping metal products, through the use of
rotating rolls.
ROLLING DIRECTION The direction, in the plane of the sheet, perpendicular to the axes of the rolls during rolling.
ROLLING MILLS Equipment used for rolling down metal to a smaller size or to a given shape employing sets of rolls
the contours of which determine or fashion the product into numerous intermediate and final shapes, e.g. blooms,
slabs, rails, bars, rods, sections, plates, sheets and strip.
SAE Abbreviation for Society of Automotive Engineers This organization has specified common and alloy steels and
copper base alloys in accordance with a numerical index system allowing approximate of the composition of the metal.
The last two digits always indicate the carbon content, usually within 0.05%.
SCALE A layer of oxidation products formed on a metal at high temperature.
SCARFING Cutting surface areas of metal objects, ordinarily by using a gas torch.
SCRAP Material unsuitable for direct use but usable for reprocessing by remelting.
SEAM On the surface of metal a crack that has been closed but not welded, usually produced by some defect either
in casting or ind working, such as blowholes that have become oxidized or folds and laps that have been formed during
working. Similar to cold shut and laminations.
SECONDS The designation given to sheet or strip that has imperfections in moderate degree or extent.
SEGREGATION The non-uniform distribution o alloying elements, impurities or phases.
SEMIFINISHED STEEL Steel in the form of billets, blooms, etc., requiring further working before completion into finished steel ready for marketing.
SHEET A flat-rolled metal product of some maximum thickness and minimum width arbitrarily dependent on the type
of metal. Sheet is thinner than plate.
SILICON (Chemical Symbol Si) Element No. 14 of the periodic system; atomic weight 28.06. Extremely common element, the major component of all rocks and sands; its chemical reactions, however, are those of a metalloid. Used in
metallurgy as a deoxidizing scavenger. Silicon is present, to some extent, in all steels.
SLAG A product resulting from the action of a flux on the nometallic constituents of a processed ore, or on the oxidized metallic constituents that are undesirable. Usually slags consist of combinations of acid oxides, and neutral oxides
are added to aid fusibility.
SLIT EDGES The edges of sheet or strip metal resulting from cutting to width by rotary Slitters.
SLITTING Cutting sheet or strip metal to width by rotary slitters.
SOAKING Prolonged heating of a metal at selected temperature.
SOFT SKIN ROLLED TEMPER (No. 4 Temper) In low carbon-rolled stripe steel, soft and ductile. Produced by sugjecting annealed Strip to a pinch pass or skin rolling (a very light rolling). Standard hardness range of R/B 65 max.
SOLERING Joining metals by fusion of alloys that have relatively low melting points most commonly, lead-base or
tin-base alloys, which are the soft solders. Hard solders are alloys that have silver, copper, or nickel bases and use of
these alloys with melting points higher than 800 F. is generally termed brazing.
300
30.11.2007
10:35 Uhr
Seite 301
Glossary
______________________
______________________
______________________
______________________
SPEROIDIZED STRUCTURE A microstructure consisting of a matrix containing spheroidal particles of another constituent.
SPHEROIDIZING Heating and cooling to produce a spheroidal or globular form of carbide in steel.
SPEROIDIZING ANNEALING A subcritical annealing treatment intended to produce spheroidization of cementite or
other carbide phases.
SPOT WELDING An electric-resistance welding process in which the fusion is limited to a small area. The pieces being
welded are pressed together between a pair of water-cooled electrodes through which an electrical current is passed
during a very short ineterval so that fusion occurs over a small area at the interface between the pieces.
SPRING STEEL Stee, normally of the high-carbon or alloy type, used in the manufacture of springs, lending itself to
appropriate heat treatment.
STAINLESS STEEL Corrosion resistant steel of a wide variety, but always containing a high percentage of chromium.
These are highly resistant to corrosion attack by organic acids, weak mineral acids, atmospheric oxidation, etc.
STAMPING A term used to refer to various press forming operations in coining, embossing, blanking, and pressing.
STEEL Iron, malleable in at least one range of temperature below its melting point without special heat treatment,
substantially free from slag, and containing carbon more than about 0.05% and less than about 2.00%. Other alloying
elements may be present in significant quantities, but all steels contain at least small amounts of manganese and silicon, and usually as undesirable constituents, also sulfur and phosphorus.
STRESS Deforming force to which a body is subjected, or, the resistance which the body offers to deformation by the
force.
STRESS RELIEVING Heating to a suitable temperature, holding long enough to reduce residual stresses and then cooling slowly enough to minimize the development of new residual stresses.
STRETCHER LEVELING A method of making metal sheet or strip dead flat by stretching.
STRIP STEEL (Cold rolled) A flat cold rolled steel product (Other than Flat Wire) 23-15/16 and narrower; under .250
in thickness, which has been cold reduced to desired decimal thickness and temper on single stand, single stand reversing, or tandem cold mills in coil form from coiled hot rolled pickled strip steel.
SULFUR (Chemical Symbol S.) Element No.16 of the periodic system; atomic weight 32 06. Non-metal occurring in a
number of alltropic modifications, the most common being a pale-yellow brittle Solid. In steel most commonly encountered as an undesired contaminant. However, it is frequently deliberately added to cutting stcok, to increase machinability.
SURFACE HARDENING A generic term covering several processes applicable to a suitable ferrous alloy that produce,
by quench hardening only, a surface layer that is harder or more wear resistant than the core. There is no significant
alteration of the chemical composition of the surface layer. The processes commonly used are inducion hardening,
flame hardening and shell hardening. Use of the applicable specific process name is preferred.
TANDEM MILL Arrangement of rolling mills, in direct line, allowing the metal to pass from one set of rolls into the next.
TELESCOPING Transverse slipping of successive layers of a coil so that the edge of the coil is conical rather than flat.
301
SPECTOGRAPH An optical instrument for determining the presence or concentration of minor metallic constituents in
a material by indicating the presence and intensity of specific wave lengths of radiation when the material is thermally
or electrically excited.
______________________
______________________
______________________
______________________
30.11.2007
10:35 Uhr
Seite 302
Glossary
TEMPER The state of or condition of a metal as to its hardness or toughness produced by either termal treatment or
heat treatment and quench or cold working or a combination of same in order to bring the metal to its specified consistency.
SHEET STEEl (Low Carbon Cold Rolled) Temper Classifications.
Temper
Rockwell
Full Hard (.070 & Thicker)
B 84 min.
Full Hard (.069 & Thinner)
B 90 min.
Half Hard
Approx. R/B 70/85
Quarter Hard
Approx. R/B 60/75
Soft (Commercial Quality)
Approx. R/B 65 max.
Drawing Quality
Approx. R/B 55 max.
STRIP Steel (Low Carbon Rolled) Temper Classifications.
Temper
Rockwell
#1 Full Hard (.070 & Thicker)
B 84 min.
#1 Full Hard (.069 & Thinner)
B 90 min.
#2 Half Hard
B 70 85
#3 Quarter Hard
B 60 70
#4 Skin Rolled
B 65 max.
#5 Dead Soft
B 55 max.
Mean Tensile
80,000
80,000
64,000
54,000
48,000
TEMPERED and POLISHED SPRING STEEL STRIP - .90/1.03 carbon range (Also known as clock spring steel.) This product, while similar to general description under heading of Tempered Spring Steel Strip, is manufactured and processed with great and extreme care exercised in each step of its production. Manufactured from carbon range of .90/1.03
with Rockwell range C 48/51.
TEPMERED SPRING STEEL STRIP Any medium or high carbon (excluding clock spring) strip steel of spring quality,
which has been hardened and tempered to meet specifications. Where specification calls for blue or straw color, same
is accomplished by passing through heat prepared at proper temperature depending on color required. Blue is developed at approximately 600 F.
TEMPERING A process of re-heating quench-hardened or normalized steel to a temperature below the transformation
range and then cooling at any rate desired. The primary purpose of tempering is to impart a degree of plasticity of
toughness to the steel to alleviate the brittleness of its martensite.
TEMPER ROLLING Light cold rolling of sheet steel. The operation is performed to improve flatness, to minimize the
formation of stretcher strains, and to obtain a specified hardness or temper.
TENSILE STRENGTH Breaking strength of a material when subjected to a tensile (stretching) force usually measured
by placing a standard test piece in the jaws of a tensile machine, gradually separating the jaws, and measuring the stretching force necessary to break the test piece. Tensile strength is commonly expressed as pounds (or tons) per square
inch of original cross section.
THICKNESS GAGE OR FEELER STOCK A hardened and tempered, edged, ground, and polished thin section, high carbon strip steel. Usually 1/2" in width and in thicknesses from .001" to .050" manufactured to extremely close tolerances. It is used primarily for determining the measurement of openings by tool and die makers, machinists, and automoblie technicians.
TOLERANCE LIMIT The permissible deviation from the desired value.
TOOL STEEL Any high carbon or alloy steel capable of being suitably tempered for use in the manufactre of tools.
TOUGHNESS Capacity of a metal to absorb energy and deform plastically before fracturing.
302
30.11.2007
10:35 Uhr
Seite 303
Glossary
______________________
______________________
______________________
______________________
303
TRACE Extremely small quantity of an element, usually too small to determine quantitatively.
______________________
______________________
______________________
______________________
304
30.11.2007
10:35 Uhr
Seite 304
Notes
10.12.2007
8:40 Uhr
Seite 305
Notes
______________________
______________________
______________________
______________________
305
30.11.2007
11:53 Uhr
Seite 1
Julius-Saxler-Strae 7
DE-54550 Daun(Germany
www.tpsd.de
service@tpsd.de
TPS Technitube Rhrenwerke GmbH Tube & Pipe Sizes - 5th Edition
www.tpsd.de